Types Of Nanomaterials Research Articles

Advanced 2D Nanomaterials for Phototheranostics of Breast Cancer: A Paradigm Shift.

Breast cancer is the leading cause of women's deaths and associated comorbidities. The advanced and targeted strategies against breast cancer have gained considerable attention due to their potential enhanced therapeutic efficacy over conventional therapies. In this context, phototherapies like photodynamic therapy (PDT) and photothermal therapy (PTT) have shown promise as an effective and alternative strategy due to reduced side effects, noninvasiveness, and spatiotemporal specificity. With the advent of nanotechnology, several types of nanomaterials that have shown excellent prospects in increasing the efficacy of photo therapies have been exploited in cancer treatment. In recent years, 2D nanomaterials have stood out promising because of their unique ultrathin planar structure, chemical, physical, tunable characteristics, and corresponding remarkable physiochemical/biological properties. In this review, the potential and the current status of several types of 2D nanomaterials such as graphene-based nanomaterials, Mxenes, Black phosphorous, and Transition Metal Dichalcogenides for photo/thermo and combination-based imaging and therapy of breast cancer have been discussed. The current challenges and prospects in terms of translational potential in future clinical oncology are highlighted.

New strategies for lung cancer diagnosis and treatment: applications and advances in nanotechnology.

Lung cancer leads in causing cancer-related mortality worldwide, continually posing a significant threat to human health. Current imaging diagnostic techniques, while offering non-invasive detection, suffer from issues such as insufficient sensitivity and the risks associated with radiation exposure. Pathological diagnosis, the gold standard for confirmation, also faces challenges like invasiveness and high costs. In treatment, surgery, radiotherapy, and chemotherapy are the main modalities, each encountering challenges related to precision, environmental adaptability, and side effects. Nanotechnology's advancement provides new solutions for the diagnosis and treatment of lung cancer, promising to enhance diagnostic accuracy and reduce side effects during treatment. This article introduces the main types of nanomaterials used in the field of lung cancer, offering a comprehensive overview of current research on the application of nanotechnology in early screening, diagnosis, treatment, and monitoring of lung cancer, and summarizing ongoing clinical research findings.

Microbial synthesis of zinc oxide nanoparticles and their potential biological application as an antimicrobial and anticancer agent

Zinc oxide nanoparticles (ZnO-NPs) are a type of metal oxide nanomaterial, recognized as a valuable and adaptable inorganic compound owing to its distinctive physical and chemical properties. Nanosized ZnO particles exhibit substantial antibacterial properties attributable to their diminutive size, which can activate various bactericidal mechanisms within the bacterial cell, including interactions with the bacterial surface or core, the generation of reactive oxygen species (ROS), the release of Zn2+, and potential endocytosis by cells. ZnO NPs nanoparticles were extracellularly produced using pigment extracts from the PP6 strain. Agar well screening indicated that PP6 secondary metabolites possess antibacterial properties. UV–Vis spectroscopy was used to analyze the external growth of nanoparticles. Scanning Electron Microcopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray diffraction (XRD) techniques were employed to analyze the shape, stability, crystalline structure, and coating of strain PP6 ZnO NPs. The PP6 ZnO NPs demonstrated an antibiofilm impact on the bacterial pathogens tested, which was dependent on the dosage. Elevated levels of lipid peroxidation (LPO) and reduced antioxidant activity are indicative of apoptosis in cancer cells. The synthesized ZnO NPs nanoparticles were assessed for their anticancer properties by performing the MTT assay on HT-29 human colorectal adenocarcinoma cells. ZnO NPs nanoparticles exposed to HT-29 cells the viability was reduced significantly in proportion to the concentration of nanoparticles. Additional comprehensive study will be needed to fully understand their mechanism.

Metal Peroxide Nanoparticles for Modulating the Tumor Microenvironment: Current Status and Recent Prospects.

Background: The significant expansion of nanobiotechnology and nanomedicine has led to the development of innovative and effective techniques to combat various pathogens, demonstrating promising results with fewer adverse effects. Metal peroxide nanoparticles stand out among the crucial yet often overlooked types of nanomaterials, including metals. These nanoparticles are key in producing oxygen (O2) and hydrogen peroxide (H2O2) through simple chemical reactions, which are vital in treating various diseases. These compounds play a crucial role in boosting the effectiveness of different treatment methods and also possess unique properties due to the addition of metal ions. Methods: This review discusses and analyzes some of the most common metal peroxide nanoparticles, including copper peroxide (CuO2), calcium peroxide (CaO2), magnesium peroxide (MgO2), zinc peroxide (ZnO2), barium peroxide (BaO2), and titanium peroxide (TiOx) nanosystems. These nanosystems, characterized by their greater potential and treatment efficiency, are primarily needed in nanomedicine to combat various harmful pathogens. Researchers have extensively studied the effects of these peroxides in various treatments, such as catalytic nanotherapeutics, photodynamic therapy, radiation therapy, and some combination therapies. The tumor microenvironment (TME) is particularly unique, making the impact of nanomedicine less effective or even null. The presence of high levels of reactive oxygen species (ROS), hypoxia, low pH, and high glutathione levels makes them competitive against nanomedicine. Controlling the TME is a promising approach to combating cancer. Results: Metal peroxides with low biodegradability, toxicity, and side effects could reduce their effectiveness in treating the TME. It is important to consider the distribution of metal peroxides to effectively target cancer cells while avoiding harm to nearby normal cells. As a result, modifying the surface of metal peroxides is a key strategy to enhance their delivery to the TME, thereby improving their therapeutic benefits. Conclusions: This review discussed the various aspects of the TME and the importance of modifying the surface of metal peroxides to enhance their therapeutic advantages against cancer, as well as address safety concerns. Additionally, this review covered the current challenges in translating basic research findings into clinical applications of therapies based on metal peroxide nanoparticles.

Recent Developments in the Adsorption of Heavy Metal Ions from Aqueous Solutions Using Various Nanomaterials.

Water pollution is caused by heavy metals, minerals, and dyes. It has become a global environmental problem. There are numerous methods for removing different types of pollutants from wastewater. Adsorption is viewed as the most promising and financially viable option. Nanostructured materials are used as effective materials for adsorption techniques to extract metal ions from wastewater. Many types of nanomaterials, such as zero-valent metals, metal oxides, carbon nanomaterials, and magnetic nanocomposites, are used as adsorbents. Magnetic nanocomposites as adsorbents have magnetic properties and abundant active functional groups, and unique nanomaterials endow them with better properties than nonmagnetic materials (classic adsorbents). Nonmagnetic materials (classic adsorbents) typically have limitations such as limited adsorption capacity, adsorbent recovery, poor selective adsorption, and secondary treatment. Magnetic nanocomposites are easy to recover, have strong selectivity and high adsorption capacity, are safe and economical, and have always been a hotspot for research. A large amount of data has been collected in this review, which is based on an extensive study of the synthesis, characterization, and adsorption capacity for the elimination of ions from wastewater and their separation from water. The effects of several experimental parameters on metal ion removal, including contact duration, temperature, adsorbent dose, pH, starting ion concentration, and ionic strength, have also been investigated. In addition, a variety of illustrations are used to describe the various adsorption kinetics and adsorption isotherm models, providing insight into the adsorption process.

Advanced Applications of Nanomaterials in Atherosclerosis Diagnosis and Treatment: Challenges and Future Prospects.

Atherosclerosis-induced coronary artery disease is a major cause of cardiovascular mortality. Clinically, conservative treatment strategies for atherosclerosis still focus on lifestyle interventions and the use of lipid-lowering and anticoagulant medications. Despite achieving some therapeutic effects, these approaches are limited by low bioavailability, long intervention periods, and significant side effects. With the advancement of nanotechnology, nanomaterials have demonstrated extraordinary potential in the biomedical field. Their excellent biocompatibility, surface modifiability, and high targeting capability not only enable efficient diagnosis of plaque progression but also allow precise drug delivery within atherosclerotic plaques, significantly enhancing drug bioavailability and reducing systemic side effects. Here, we systematically review the current research progress of nanomaterials in the field of atherosclerosis to summarize not only the types of nanomaterials but also their applications in both the diagnosis and treatment of atherosclerosis. Notably, in the context of plaque therapy, we provide a comprehensive overview of current nanomaterial applications based on their targeted therapeutic systems for different cell types within plaques. Additionally, we address the persistent challenge of clinical translation of nanomaterials by summarizing current issues and providing directions for innovation and improvement in nanomaterial design. Overall, we believe that this review systematically summarizes the applications and challenges of biomedical nanomaterials in atherosclerosis diagnosis and therapy, thereby offering insights and references for the development of therapeutic materials for atherosclerosis.

Cellulose nanomaterial metrology: microscopy measurements.

Cellulose nanomaterials are increasingly used for a wide variety of applications. Adequate characterization of these materials is required for quality control during production, to distinguish between materials synthesized by different methods, by different suppliers or from difference cellulose biomass sources, to facilitate development of applications and for regulatory purposes. Here we review recent microscopy measurements for the three main types of cellulose nanomaterials: cellulose nanocrystals, individual cellulose nanofibrils and cellulose nanofibrils. Atomic force microscopy and both scanning and transmission electron microscopy are covered with a focus on recent studies that have metrological rigor, rather than qualitative investigations. In some cases results are compared to those obtained by other methods that are more likely to see widespread use for routine quality control measurements. Detailed studies that use microscopy to provide insight on fundamental material properties (e.g., chiral properties) are also included. Particle size and morphology are important properties but are challenging to measure for cellulose nanomaterials due to the rod or fibril shaped particles, their propensity to agglomerate and aggregate, their low contrast for electron microscopy and, for cellulose nanofibrils, the complex branched and interconnected structures. Overall, the results show that there are now a number of studies in which attention to metrological detail has resulted in measurements that allow one to compare and distinguish between different materials, although there are still examples for which it is not possible to draw conclusions on size differences. The use of detailed microscopy protocols that yield accurate and reliable results will be beneficial in material production and addressing regulatory requirements and will allow the validation of other methods that are more amenable to routine measurements.

Nanomaterials Marvels: Transformative Advancements in Biomedicine, Drug Delivery, and Pharmaceutical Analysis

Nanoparticles are solid colloidal particles ranging in size from 10 to 1000 nm having high surface area-to-volume ratio which allows them for efficient interaction with biological systems. Nanoparticles offer many benefits in comparison to larger particles such as increased surface-to-volume ratio and increased magnetic properties. Nanomaterials hold the potential to revolutionize in critical domains like Biomedicine, Drug Delivery, and Pharmaceutical Analysis. These particles can be functionalized with specific molecules to target diseased cells or tissues, enhancing the efficacy of drugs while minimizing side effects. For instance, gold nanoparticles conjugated with antibodies can be used for targeted cancer therapy, delivering therapeutic agents directly to tumor cells. Similarly drugs encapsulated within nanoparticles can be protected from premature degradation and released in a controlled manner at the target site improving their drug solubility, and enhance cellular uptake, leading to better therapeutic effect in treatment strategies. Polymeric nanoparticles, liposomes, and micelles are some examples of commonly used nanocarriers for drug delivery. Nanomaterials are finding increasing applications in pharmaceutical analysis and can be employed as highly sensitive detection probes for drugs, metabolites, and biomarkers. Additionally, nanomaterials can be used for the separation and purification of bio molecules, facilitating accurate and efficient analysis. This review explores different types of nano materials used exploring their new advances and applications in biomedicine, drug delivery, and pharmaceutical analysis. As research continues to overcome current challenges, nanomaterials unique properties hold immense promise for revolutionizing healthcare and improving patient outcomes.

Research on the Mechanism of Nanoparticle materials in Oil Displacement and its Application

Abstract The application of nanoparticles in the field for enhanced oil recovery (EOR) is a new technology, which has attracted widespread concern. However, there is a lack of systematic research on the types and mechanisms. In order to clarify the types and characteristics of the material, oil displacement mechanism and its effect on oil and water flow, this paper systematically sorted out the classification of nanoparticle materials used in the field of petroleum development, and analysed its percolation and oil displacement mechanism. Numerical simulation and field data analysis were carried out to study the applications of two types of nanomaterials in improving reservoir water injection and oil displacement efficiency quantitatively. The results show that the main mechanism of nanoparticle flooding is to change reservoir wettability, reduce oil-water interfacial tension, modify the mobility ratio between water and oil phases, and reduce asphaltene precipitation. Lipophilic and hydrophobic nanoparticle may reduce injection pressure, and increases significantly injection in low permeability reservoirs, and the average water injectability of 6 wells is increased by 177.76%. The displacement efficiency of hydrophilic and oleophobic nanoparticles can be increased by 14.78%. This paper reveals the oil displacement mechanism of nanoparticle materials and establishes a new method to quantitatively predict the oil displacement effect of nanoparticle materials, which provides a basis and reference for the application of oilfield.

Distinct accumulation patterns, translocation efficiencies, and impacts of nano-fertilizer and nano-pesticide in wheat through foliar versus soil application

The use of nano-chemicals in agriculture has been shown to enhance crop production through soil additions or foliar sprays. However, the accumulation pattern, translocation efficiency, mode of action of nanomaterials (NMs) via different application methods remain unclear. In this study, wheat was treated with CuO-NPs/CeO2-NPs (50 and 100 nm) for 21 days using soil and foliar application separately. Foliar spray resulted in higher accumulation and more efficient translocation of NMs compared to soil addition. Smaller NMs exhibited higher accumulation and transfer capabilities under the same application method. The accumulation of CuO-NPs was approximately 20 times greater than that of CeO2-NPs, particularly under the soil addition treatment. Scanning electron microscopy analysis demonstrated that NMs could directly enter wheat leaves via stomata during foliar application. Wheat growth was inhibited by roughly 15 % following CuO-NPs exposure, whereas no significant effects on growth were observed with CeO2-NPs. By integrating nontargeted metabolomics analysis with targeted physiological characteristics assessments, it was revealed that CuO-NPs mainly disturbed nitrogen metabolism pathways and induced oxidative damage. In contrast, CeO2-NPs enhanced carbohydrates related biological processes such as starch and sucrose metabolism, glycolysis, and TCA cycle, which are crucial for carbon metabolism. These findings suggest that the type of nanomaterial is a crucial factor to consider when evaluating their foliar or soil application in agriculture.

Pharmaceutical/Biomedical Applications of Electrospun Nanofibers - Comprehensive Review, Attentive to Process Parameters and Patent Landscape.

Nanotechnology is a new science and business endeavour with worldwide economic benefits. Growing knowledge of nanomaterial fabrication techniques has increased the focus on nanomaterial preparation for various purposes. Nanofibers are one-dimensional nanomaterials having distinct physicochemical properties and characteristics. Nanofibers are nanomaterial types with a cross-sectional dimension of tens to hundreds of nanometres. They may create high porosity mesh networks with significant interconnections among pores, making them suitable for advanced applications. Electrospinning stands out for its ease of use, flexibility, low cost, and variety among the approaches described in the literature. The most common method for making nanofibers is electrospinning. This article extensively describes and summarizes the impact of various process variables on the fabrication of nanofibers. Special attention has been given to scientific and patent prospection to confirm the research interests in nanofibers.

Surface Modification of Gold Nanorods: Multifunctional Strategies and Application Prospects.

Gold nanorods (AuNRs), as an important type of gold nanomaterials, have attracted much attention in the nano field. Compared with gold nanoparticls, AuNRs have broader application potential due to their tunable localized surface plasmon resonance properties and anisotropic shapes. Yet, conventional synthesis methods using surfactants have limited the use of AuNRs in a variety of fields such as biomedical applications, plasma-enhanced fluorescence, optics and optoelectronic devices. To solve this problem and improve the stability and biocompatibility of AuNRs, researchers in recent years have used surface modification and functionalization to modify AuNRs, among which the introduction of organic ligands to prepare organic/gold hybrid nanorods has become an effective strategy. Organic materials have better toughness and easy processing, and by introducing organic ligands into the surface of AuNRs, the molecular-level composite of organic and inorganic materials can be realized, thus obtaining hybrid nanorods with excellent properties. This paper reviews the research progress of hybrid nanocomposites, and introduces the synthesis methods of AuNRs and the development of surface ligand modification, then summaries the applications of a wide variety of ligands. Also, the advantages and disadvantages of different ligands and their roles in further self-assembly processes are discussed.

Significantly enhanced electrochemical performance of Al-Ti3C2Tx MXene synthesized from Al-Ti3AlC2 MAX phase

MXenes, a type of two-dimensional nanomaterials consisting of transition metal carbides/nitrides, have emerged as promising electrode materials for supercapacitors. Especially, Ti3C2Tx MXene prepared from Ti3AlC2 MAX phase shows great application potential in flexible supercapacitors due to its facile synthesis, excellent conductivity and film-forming property. In contrast to conventional Ti3AlC2, excessive aluminum is incorporated in the synthesis process to produce Al-Ti3AlC2. In this study, Ti3AlC2 and Al-Ti3AlC2 MAX phases are used to synthesize Ti3C2Tx and Al-Ti3C2Tx MXenes, respectively, by the same method of HF:HCl etching and LiCl intercalation. The freestanding Ti3C2Tx and Al-Ti3C2Tx film electrode is separately prepared through simple vacuum filtration. The presence of excess aluminum during the Al-Ti3AlC2 synthesis facilitates to form more homogeneous grains structure with relatively larger particle sizes and an improved stoichiometric MAX phase with a Ti:C ratio closer to 3:2. The resulting Al-Ti3C2Tx nanosheets show improved oxidation resistance with relatively uniform and larger dimensions, which facilitate the higher conductivity with slightly increased interlayer spacing for the Al-Ti3C2Tx film. Therefore, the Al-Ti3C2Tx film electrode shows more efficient ions transport and charge transfer, and thus achieves significantly enhanced capacitance (399 F g−1 at 1 A g−1) and rate performance (63.6 % retention from 1 to 10 A g−1) compared to the Ti3C2Tx film electrode (342 F g−1 at 1 A g−1, 55.6 % retention from 1 to 10 A g−1). Moreover, the Al-Ti3C2Tx-based flexible sandwiched supercapacitor also exhibits superior energy storage performance. The impressive results indicate that Al-Ti3C2Tx MXene synthesized from Al-Ti3AlC2 MAX phase possesses the great application potential in flexible supercapacitors.

Carbohydrate-Derived Superhydrophilic Carbon Aerogels and Their Effects on Seedling Growth of Triticum aestivum.

Synthesis methods of carbon nanomaterials have been developed vigorously in recent years, among which a simple, green, and mature approach is of more research significance. Carbon nanomaterials have depicted an impact on the growth and development of plants. In this study, a new type of carbon nanomaterial, superhydrophilic carbon aerogel (CA), was synthesized via a hydrothermal process using carbohydrates and water-soluble polymers as raw materials. Characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, powder X-ray diffraction, and N2 adsorption analysis, the exemplified CA presented to have porous three-dimensional network structure composed of individual particles with diameters of 25 nm, with reactive surface, single composition, high specific surface area (89.94 m2·g-1), and wide range of density variation. The 9 mg·mL-1 CA suspension had a significant positive effect on the root growth of wheat seedlings, with promoted root elongation (about 67.17% longer) and root diameter (about 28.95% thicker) compared with those of the control group. The cytological results suggested that CA treatment triggered the propagation of meristematic cells, and the increased number of meristematic cells (65.79% more than the control group) led to enhanced root growth by upregulated expression of related phytohormone genes in wheat seedlings.

Construction of electrochemical immunosensor from MXene/multi-walled carbon nanotubes/gold nanoparticles for specific detection of carcinoembryonic antigen.

With the advancement of nanotechnology, various types of nanomaterials have been integrated into electrochemical immunoelectrodes to enhance their performance. Among these, MXene stands out as a promising candidate due to its high electron transfer capacity and abundant surface chemical groups. However, the improvement in electrode performance is often hindered by the self-restacking and agglomeration of MXene. To address this issue, multi-walled carbon nanotubes (MWCNTs) were selected to form composites with MXene. Subsequently, a label-free immunosensor, BSA/Ab/AuNPs/MXene-MWCNTs-Nafion/ITO, was fabricated for specific detection of carcinoembryonic antigen (CEA), a widely used tumor marker. The results demonstrated that the incorporation of MWCNTs can effectively prevent the self-stacking of MXene. Moreover, the composites enhanced the loading of gold nanoparticles (AuNPs) to connect the antibodies, thereby improving electronic transmission signals and sensitivity. The sensor exhibited excellent analytical performance towards CEA with a wide linear range (0.050 to 200ngmL-1) and a low limit of detection of 0.015ngmL-1 (S/N = 3). The possibility of it being applied in clinical trials was verified by using ELISA and differential pulse voltammetry (DPV) assays to detect CEA in serum samples. The recoveries ranged from 95.34 to 102.09% with relative standard deviations (RSDs) below 5.00%. Furthermore, the sensor displayed satisfactory selectivity, repeatability, and stability. We hope the findings highlight promising prospects for advanced immunosensor development and alternative strategies in cancer diagnosis.

Overview on Nanomaterials for Nanocosmetics

One of the scientific areas with the highest growth right now is nanotechnology. The development of nanocosmetics through the use of nanoscale materials has become more popular in recent years. Due to distinct structures, chemical, physical, physiochemical, and functional properties - most of them are absent in their non-nanoscale forms - some nanomaterial types are extremely appealing for use in the cosmetics sector. Regardless of their kind, form, morphology, or content, nanomaterials have two primary purposes in cosmeceutical inventory [1]: nano-constructs as (UV) filters, and [2] nanostructures as biologically active components for topical applications and other treatments associated with cosmeceuticals, such as moisturizers, skincare, makeup, sunscreen, and hair care products. As Ultraviolet filters or Ultraviolet protectants, various types of nanoparticles, such as silver, gold, titanium, and zinc, have been employed in the former scenario to hinder or to Utilize UV radiation and shield the layer beneath the skin from damaging consequences. Nanoliposomes are the delivery systems used in the 2nd concept usage. Therefore, next-generation cosmeceutical solutions for blossoming beauty that offer enhanced skin hydration, bioavailability, agent stability, and regulated UV occlusion have been highlighted as potentially becoming nanomaterial-loaded nanocosmetics. In light of the criticisms mentioned earlier and the potentialities of nanomaterials, we first examined the benefits of using nanoliposomes and nanoparticles as UV filters and delivery systems. The work's second split discusses the safety and legal implications of nanoparticles employed in compositions. Concluding remarks and suggestions for further study round out the work and enable material scientists to securely utilize nanoparticles in large-scale commercial goods.

Photo-crosslinking injectable Photothermal antibacterial hydrogel based on quaternary ammonium grafted chitosan and hyaluronic acid for infected wound healing

Antibacterial hydrogels not only provide a better environment for skin wounds to avoid infection but also accelerate wound healing. Herein, chitosan modified by a quaternary ammonium salt (CQ), and hyaluronic acid grafted with methacrylate (HM) were designed and synthesized to prepare an injectable photo-crosslinking hydrogel for wound dressing with inherent antibacterial and photothermal properties. CQ and HM exhibited excellent biocompatibility, improved water retention, and antibacterial activity, illustrating vast potential as an antibacterial material in various applications. MXene, a type of 2D nanomaterial, has been widely researched due to its photothermal properties. The CQ and HM polymer precursor could be mixed with Mxene and then crosslinked with 395 nm UV radiation under mild conditions to form a 3D network structure CQ-HM/MXene hydrogel. This hydrogel displayed an appropriate swelling ratio, elastic modulus, photothermal property and excellent biocompatibility. The injectable property of the hydrogel allowed it to easily cover the wound. In vitro and in vivo studies showed that the injectable hydrogel had low cytotoxicity and excellent antibacterial properties, which could help promote wound healing. In summary, this novel CQ-HA/MXene hydrogel has the potential for application in skin wound healing due to inherent antibacterial activity and photothermal effect.

Photoluminescent Multicolor Carbon Dots for UV Detection and Dynamic Anticounterfeiting.

Carbon dots (CDs) are an emerging type of fluorescent carbon nanomaterial with broad application prospects. Among them, photochromic CDs have been widely used in the field of optoelectronic devices but rarely in ultraviolet (UV) detection. In this work, we successfully developed photochromic CDs that exhibit reversible emission under light stimulation in an amine solvent system. Notably, the CDs showed ultrafast photochromic behavior in diethylamine solvent, shifting the fluorescence color from cyan-green to orange-red after 2 s of irradiation, with the solution color changing from pale yellow to pale purple. Furthermore, this performance could recover without additional stimuli, simply by standing for several tens of seconds. Structural analysis indicated that rapid photochromism arises from changes in the surface functional group radicals of the CDs, with the reversibility attributed to fluctuation in these radicals. Leveraging the excellent photochromic properties of CDs, we further developed a device for detecting UV indices in sunlight. This opens up broad prospects for developing high-performance UV detection devices based on CDs.

Breast Cancer Cell Destruction Using Individually Encapsulated Cytotoxic T Lymphocytes in Polyelectrolyte Layer Coated with Dual Nanoparticles in Combination with Magnetic Exposure and Laser Irradiation

ABSTRACTCell encapsulation can protect cells from the host immune system. It is well‐known that cytotoxic T lymphocytes (CTLs) can destroy cancer cells. In this study, we individually encapsulated CTLs in a cationic polyelectrolyte in combination with two types of nanomaterials: magnetic nanoparticles (MNPs) and gold nanorods (GNRs) conjugated to anti‐human epidermal growth factor receptor‐2 (HER2) antibodies referred to as CTLs/mMNPs/PAH/GNRs@HER2. When MCF‐7 breast cancer cells were co‐cultured with CTLs/mMNPs/PAH/GNRs@HER2 and subjected to a magnetic field and laser irradiation, the viability of MCF‐7 cells was significantly decreased to 42.98 ± 0.57% in comparison to MCF‐7 cells without any treatment or MCF‐7 cells co‐cultured with CTLs (51.52 ± 0.57%). This can be a novel strategy for cancer treatment using encapsulated CTLs in polyelectrolytes and dual nanomaterials in combination with magnetic exposure and laser irradiation.

Advances in Nanomaterials for Immunotherapeutic Improvement of Cancer Chemotherapy.

Immuno-stimulativeeffect of chemotherapy (ISECT) is recognized as a potential alternative to conventional immunotherapies, however, the clinical application is constrained by its inefficiency. Metronomic chemotherapy, though designed to overcome these limitations, offers inconsistent results, with effectiveness varying based on cancer types, stages, and patient-specific factors. In parallel, a wealth of preclinical nanomaterials holds considerable promise for ISECT improvement by modulating the cancer-immunity cycle. In the area of biomedical nanomaterials, current literature reviews mainly concentrate on a specific category of nanomaterials and nanotechnological perspectives, while two essential issues are still lacking, i.e., a comprehensive analysis addressing the causes for ISECT inefficiency and a thorough summary elaborating the nanomaterials for ISECT improvement. This review thus aims to fill these gaps and catalyze further development in this field. For the first time, this review comprehensively discusses the causes of ISECT inefficiency. It then meticulously categorizes six types of nanomaterials for improving ISECT. Subsequently, practical strategies are further proposed for addressing inefficient ISECT, along with a detailed discussion on exemplary nanomedicines. Finally, this review provides insights into the challenges and perspectives for improving chemo-immunotherapy by innovations in nanomaterials.