Archetypal Research Articles

The association between foot morphology and foot loading during gait

The perceived association between foot type and injury risk has inspired the development of many foot typing methods. The purpose of this study was to determine how well different foot typing methods explained variations in regional foot loading in asymptomatic adults during gait, while considering age, sex, and walking speed as covariates. Six methods were used to determine foot type in 92 asymptomatic adults. An insole pressure sensor system measured peak force and force-time integral during treadmill walking at a self-selected pace. The foot was divided into nine regions and the association between foot type and foot loading was analyzed using generalized estimating equations (GEE) while accounting for the covariates. Over an average of 250 steps per individual, the results demonstrated variability in the association between regional foot loading and foot type. Specifically, Arch Index and X-Ray Arch Type correlated with hindfoot and midfoot loading, while Foot Posture Index correlated with medial midfoot, forefoot, and toe loading. Calcaneal Pitch and Meary’s Angle correlated with medial hindfoot, midfoot, and forefoot loading, while Varus/valgus angle correlated with loading in the forefoot and toes. The location and direction of associations were generally similar for Calcaneal Pitch, Meary’s Angle, and X-Ray Arch Type, and opposite of Arch Index. The analyses demonstrated that walking speed, age, and sex were all important factors that affected the relationship between plantar loading and foot type. Specific foot type methods correlate better with loading in specific foot regions, potentially making them better to evaluate injury risk in those regions.

Fingerprint inventory smart students at SMA N 1 Gunung Tuleh Pasaman Barat

Fingerprints are one of the biological characteristics possessed by humans. Fingerprints consist of arch, whorl and loop pattern types. The average human has a fingerprint pattern. One individual and another individual have different fingerprint patterns and are each unique. This research method uses a descriptive method with a purposive sampling technique which was carried out by taking fingerprint samples from students who were ranked 1 to 10 from class phase f and class XII at SMA N 1 Gunung Tuleh, West Pasaman district. With a sample size of 112 people. The results of the research can be concluded that the most frequently found fingerprint patterns are loop pattern fingerprints at 71.87%, then whorl finger scale patterns at 24.48%, and arch patterns at 24.48%.

Assessment of Residual Ridge Morphology among Edentulous Patients at A Tertiary Care Center of Nepal

Background The morphology of the residual ridge is one of the predominant factors influencing denture retention, stability, support and the masticatory function in edentulous patients thereby affecting both the planning and treatment prognosis. This study was aimed to assess the different types of maxillary and mandibular residual ridge in the group of edentulous population in Chitwan, Nepal. MethodsA descriptive cross-sectional study was conducted in total of 107 completely edentulous patients within the age of 55-85 years’ in Prosthodontic department of Chitwan Medical College. The type of maxillary and mandibular residual alveolar ridge in both male and female patients were noted in a predesigned proforma according to American College of Prosthodontists (ACP) classification system. The collected data was entered into Microsoft Excel and later transferred into SPSS version 26 and analyzed for descriptive statistics.ResultsIn this study, 107 completely edentulous patients both male 63 (58.9%) and female 44 (41.1%) participated in the study. In the maxillary arch, Type B was most prevalent residual ridge type 55 (51.4%) whereas Type C in mandibular arch around 35 (32.7%). In male patients, Type B was most common 36 (57.1%) whereas Type A in female 20 (45.5%). Conclusions From this study it can be concluded that there is variation in the residual ridge. In maxillary arch, type B residual ridge was most prevalent followed by type A while in the mandibular arch type C was prevalent followed by type B.

A retrospective study on the outcome of pulpotomy with iRoot BP plus in primary molars and its relationship with hemostasis time

BackgroundPulpotomy is a crucial method to preserve primary teeth until natural exfoliation. This study aimed to evaluate the clinical and radiographic outcomes of pulpotomy with iRoot BP Plus in primary molars and to explore the association between hemostasis time and these outcomes.MethodsPrimary molars that underwent iRoot BP Plus pulpotomy and were followed for at least 12 months were selected for this study. Clinical and radiographic data were collected, and the success rate was analyzed in relation to factors such as hemostasis time, tooth type, and arch type. The tests of significance used were the chi-square test, Fisher’s exact test, or Kruskal-Wallis test. Statistical significance was set at P < 0.05.ResultsA total of 183 teeth in 106 patients were included in the analysis. The follow-up period fell into a range of 1–3 years, with a mean of 1.6 years. The clinical and radiographic success rates were 96.7% and 92.9%, respectively. The earliest time to observe the radiographic failures was half a year after the treatment, and the latest time was two years after the treatment. Among all the teeth, 130 were recorded with hemostasis time before the application of iRoot BP Plus. Compared to teeth with a hemostasis time of 5 min or less, teeth with a hemostasis time exceeding 5 min showed no significant differences in clinical and radiographic success (P = 1.000 and 0.879). Additionally, neither arch nor teeth type showed a relationship with the pulpotomy success rate (P > 0.05).ConclusionsPulpotomy using iRoot BP Plus in primary molars achieved favorable results. The hemostasis time may not significantly impact the outcomes of pulpotomy using iRoot BP Plus in primary molars.

Morphometric Evaluation of the Maxillary Arch Using Cone Beam Computed Tomography

Objective: Anatomically, a dental arch is a result of natural teeth being positioned on the alveolar bone. The purpose of this study is to assess the morphological characteristics of various maxillary arch types using Cone Beam Computed Tomography (CBCT) and ascertain their prevalence. Methods: This retrospective study analyzed 200 randomly selected maxillary CBCT images from patients aged 18–65. Measurements were interpreted using various planes, and maxillary arch forms were classified according to the House dental arch classification in the axial region of the CBCT images. Results: Patients over 45 years old had significantly higher mean canine-palate and first molar-palate measurements compared to younger groups, particularly the 18–25 age group, which showed a higher hard palate–anterior mean than the 25–35 group. Class II cases had a significantly higher mean canine-palate than Class I and III cases. Class II cases also exhibited higher first molar-palate and canine-anterior means compared to Class I and III. In contrast, Class I cases had a higher canine-canine mean than the other classes. Conclusion: Morphologic measurements are crucial for guiding specialists in diagnosis and treatment, enhancing the ease and accuracy of clinical practice.

Computed tomography angiography-guided analysis of morphologic properties of the thoracic aorta and arch branches among the adult population: A cross-sectional study.

Before performing any surgical or endovascular procedure, the anatomical classification of the patient is essential for treatment planning. Computed Tomographic Angiography (CTA) is a standard method to evaluate thoracic aortic anatomy and associated variations. This cross-sectional, descriptive study was performed among adult participants without any peripheral vascular diseases undergoing thoracic CTA. Demographic data were collected along with factors retrieved from the patients CTA, such as the type of aortic arch, length, and diameter of ascending and descending aorta, the diameter of the main branches and the distance between branches, the angles by which the main arteries rise from their origins, and left anterior oblique angle of the aortic arch. 164 patients, with a mean age of 57 ± 19.3 years, entered the study. 53 (33.8%) had a bovine arch, which was mostly observed among males. A decrease in the frequency of type I arch and also an increase in the frequency of type 2 and 3 arches was observed with the increase in age (p < 0.001). The BCT diameter had a direct association with both left common carotid artery diameter (r = 0.478, p < 0.001) and left subclavian artery diameter (r = 0.470, p < 0.001). The length of the descending aorta had a direct correlation (r = 0.294, p < 0.001) with the length of the ascending aorta. Complex endovascular interventions are vital method in treating aorta, head, and neck pathologies. Accurate knowledge of thoracic aortic anatomy is becoming crucial for diagnosis and intervention planning.

Malocclusion in deciduous dentition: a cross-sectional study in a Portuguese preschool population

PurposeTo determine the prevalence of malocclusion in Portuguese preschool children, to characterise occlusion in the deciduous dentition, and to study the relationship between malocclusion, sex, and age.MethodsThis cross-sectional study included 3–6 years old children, from 25 randomly selected kindergartens from the Lisbon district. Data were collected through an oral examination. Malocclusion was defined as the presence of any type of occlusion anomaly (anterior crossbite, edge-to-edge, increased overjet, open bite, deep overbite, posterior crossbite, scissor bite), spacing anomaly (crowding), or dentition anomaly (supernumerary teeth, agenesis, malformations). Canine class, terminal plane of the deciduous second molars and type of Baume arch were also recorded. Statistical analysis included descriptive and chi-squared test (α = 0.05).ResultsThe sample included 426 children with a global prevalence of malocclusion of 60.6%. Occlusion anomalies were the most prevalent (59.2%), the most frequent being deep overbite (27%), increased overjet (22.1%) and posterior crossbite (14.1%). Crowding had a prevalence of 1.6% and agenesis of 1.4%. Class I canine (57.3%), straight second molar terminal plane (60.1%) and type I Baume arch (53.3%) were the most common. The mean overjet was 2.6 mm (sd = 2.1) and the mean overbite was 2.2 mm (sd = 2.1). Age was associated with the presence of occlusion anomalies (p = 0.03), and increased overjet prevalence was found to be higher in girls (p = 0.03).ConclusionsThe prevalence of malocclusion was high, with occlusion anomalies being the most prevalent. It is important to identify modifiable risk factors associated with malocclusion to prevent this condition in both the deciduous and permanent dentitions.

Flat Foot based on Clarke's Angle Method and Overweight among Medical Students of Universitas Airlangga

Highlights: Being overweight can be one of the causes of flat foot. A person with flat feet may experience pain in the medial malleolus area and discomfort when tiptoeing. Abstract Introduction: A flat foot is an arch deformity, and being overweight is one of the risk factors. It can cause problems such as fatigue, pain in the ankle and back, foot pain (especially during long walks or sports), and disturbances in balance and walking patterns. This study aimed to examine the relationship between flat feet (measured using Clarke's angle) and overweight students at the Faculty of Medicine, Universitas Airlangga. Methods: This study used an observational analytic design with a cross-sectional method, gathering primary data directly from the research sample. The data were analyzed using the International Business Machines Corporation (IBM) Statistical Package for the Social Sciences (SPSS) version 26. Results: Of the 56 samples meeting inclusion criteria, most cases of flat foot occurred in males. A total of 36 research subjects were overweight or obese, evenly split between females and males. Among the 112 samples, 19 had flat feet, and 93 did not. Chi-square test analysis indicated a highly significant p-value (0.001, p &lt; 0.05), suggesting a significant relationship between flat feet and overweight. Conclusion: There was a significant relationship between flat feet (measured using Clarke's angle) and overweight. The majority of subjects in this study were overweight based on body mass index (BMI), and most had a non-flat foot arch type. All cases of flat foot were found in subjects with overweight BMI.

Factors Affecting Compression of the Left Subclavian Artery Bridging Stent In Zone 2 Fenestrated Endovascular Arch Repair.

Left subclavian artery (LSA) preservation during thoracic endovascular aortic repair (TEVAR) has been related to low morbidity. This study investigated the incidence of LSA stent compression in patients managed with fenestrated endovascular arch repair (f-Arch) and evaluated the impact of anatomic and technical factors on LSA stent outcomes. A single-center retrospective analysis of patients managed with single-fenestration devices (Cook Medical, Bloomington, IN, USA) for LSA preservation, between January 1, 2012 and November 30, 2023, was conducted. Anatomic (arch type, bovine arch, distance between the LSA and most proximal bone structure, left common carotid artery and aortic lesion, take-off angle, diameter, thrombus, calcification, dissection, tortuosity) and technical parameters (stent type, diameter, length, relining, post-dilation) were evaluated. Stent compression was any ≥50% stenosis (using center luminal line) of the stent compared with its initial diameter. Clinical outcomes included stroke and upper limb ischemia at 30 days and follow-up. Technical outcomes included stent compression and need for reintervention. Fifty-four cases were included. Only balloon-expandable covered stents were used, and relining during the index procedure was performed in 18%. No stroke or arm ischemia was recorded. One stent compression was detected at 30 days. During follow-up, no stroke or arm ischemia was diagnosed. Nine cases (18%) presented stent compression, with a mean time of stent-compression diagnosis at 18 months (interquartile range [IQR]=37, range=1-58 months) after the index procedure. Five (56%) underwent secondary relining. Follow-up after reintervention was uneventful. Lower distance to the nearest bone structure (compression group [CG]: 11.7±8.9 mm vs non-compression group [NCG]: 23.0±7.8 mm, p=0.003) and higher tortuosity index (CG: 1.3±0.4 vs NCG: 1.2±0.1, p=0.03) were associated with LSA stent compression. LSA stent compression in patients managed with f-Arch affected 1 in 5 cases, without clinical consequences. Distance to the nearest bone structure and higher tortuosity were associated with LSA stent compression. Fenestrated endovascular arch repair for the preservation of the left subclavian artery (LSA) in patients needing landing within the aortic arch has been performed with encouraging outcomes. This analysis showed that LSA stent compression is met in 18% of patients, without though any clinical consequence. Pre-operative anatomic parameters, as lower distance to the nearest bone structure and higher tortuosity index affect negatively LSA stent performance while stent parameters seem to have no impact.

Transcarotid artery revascularization outperforms transfemoral carotid artery stenting regardless of aortic arch type or degree of atherosclerosis

ObjectiveThe Centers for Medicare and Medicaid Services now approve reimbursement for transfemoral carotid artery stenting (TFCAS) in the treatment of standard-risk patients with carotid artery occlusive disease. TFCAS in patients with complex aortic arch anatomy is known to be challenging with worse outcomes. Transcarotid artery revascularization (TCAR) could be a preferable alternative in these patients owing to avoiding the aortic arch and using flow reversal during stent deployment. We aim to compare the outcomes of TCAR vs TFCAS across all aortic arch types and degrees of arch atherosclerosis. MethodsAll patients undergoing carotid artery stenting between September 2016 and October 2023 were identified in the Vascular Quality Initiative database. Patients were stratified into four groups: Group A (mild atherosclerosis and type I/II arch), Group B (mild atherosclerosis and type III arch), Group C (moderate/severe atherosclerosis and type I/II arch), and Group D (moderate/severe atherosclerosis and type III arch). The primary outcome was in-hospital composite stroke or death. Analysis of variance and χ2 tests analyzed differences for baseline characteristics. Logistic regression models were adjusted for potential confounders, and backward stepwise selection was implemented to identify significant variables for inclusion in the final models. Kaplan-Meier survival estimates, log rank test, and multivariable Cox regression models analyzed hazard ratios for 1-year mortality. ResultsA total of 20,114 patients were included (Group A: 12,980 [64.53%]; Group B: 1175 [5.84%]; Group C: 5124 [25.47%]; and Group D: 835 [4.15%]). TCAR was more commonly performed across the four groups (72.21%, 67.06%, 74.94%, and 69.22%; P < .001). Compared with patients with mild arch atherosclerosis, patients with advanced arch atherosclerosis in Group C and Group D were more likely to be female, hypertensive, smokers, and have chronic kidney disease. Patients with type III arch in Group B and Group D were more likely to present with stroke preoperatively. On multivariable analysis, TCAR had less than one-half the risk of stroke/death and 1-year mortality compared with TFCAS in the patients with the mildest atherosclerosis and simple arch anatomy (Group A) (odds ratio [OR], 0.43; 95% confidence interval [CI], 0.31-0.61; P < .001; hazard ratio, 0.42; 95% CI, 0.32-0.57; P < .001). Group B patients with similar atherosclerosis but more complex arch anatomy had 70% lower odds of stroke/death with TCAR compared with TFCAS (OR, 0.30; 95% CI, 0.12-0.75; P = .01). Similar findings were also evident in patients with more severe atherosclerosis and simple arch anatomy (OR, 0.66; 95% CI, 0.44-0.97; P = .037). There was no significant difference in odds of stroke/death in patients with advanced arch atherosclerosis and complex arch (Group D) (OR, 0.91; 95% CI, 0.39-2.16; P = .834). ConclusionsTCAR is safer than TFCAS in patients with simple and advanced arch anatomy. This could be related to the efficiency of flow reversal vs distal embolic protection. The current Centers for Medicare and Medicaid Services decision will likely increase stroke and death outcomes of carotid stenting nationally if multidisciplinary approach and appropriate patient selection are not implemented.

Impact of using single-file reciprocating system on the quality of root canal treatment treated by undergraduate students

BackgroundThis study aimed to evaluate the use of a single-file reciprocating system on the technical quality of root canal filling and treatment by radiographic assessment of cases treated by undergraduate dental students. Materials and methodsThis was a retrospective cross-sectional clinical study of endodontically treatments conducted by fourth-year undergraduate students during the academic year 2021–2022. Root canal preparation was performed using the WaveOne Gold system with matching single-cone gutta-percha. The collected data included sex, tooth position, number of canals, and treatment time (first or second semester). The quality of the root canal filling was assessed based on the root canal filling length, density, and taper. The presence of ledges, apical transportation, perforation, and instrument separation were recorded. Data were analyzed using SPSS version 28. Chi-square tests were used, and the statistical significance level was set at P < 0.05. ResultsA total of 601 teeth were included. The length of the root canal filling was adequate in 93.51 % of the teeth, underfilled in 2.82 %, and overfilled in 3.66 %. The density and taper were adequate in 96.5 % and 98.16 % of the teeth, respectively. There were no significant differences among the parameters of length, taper, density, or procedural errors relative to the arch type. However, there was a significant difference between the anterior and premolar teeth in terms of taper, density, and overall quality of the root canal filling. The overall quality of root canal treatment was acceptable in 527 teeth (87.68 %), with no significant difference between teeth (P = 0.256). ConclusionThe quality of root canal treatment performed by undergraduate students using a single-file reciprocating system is good or acceptable.

Accuracy of navigation guided implant surgery for immediate loading complete arch restorations: Prospective clinical trial.

To assess navigation accuracy for complete-arch implant placement with immediate loading of digitally prefabricated provisional. Consecutive edentulous and terminal dentition patients requiring at least one complete-arch FDP were treated between December 2020 and January 2022. Accuracy was evaluated by superimposing pre-operative and post-operative cone beam computed tomography (CBCT), recording linear (mm) and angular (degrees) deviations. T-tests were performed to investigate the potential effect of the registration algorithm (fiducial-based vs. fiducial-free), type of references for the fiducial-free algorithm (teeth vs. bone screws), site characteristic (healed vs. post-extractive), implant angulation (axial vs. tilted), type of arch (maxilla vs. mandible) on the accuracy with p-value <0.05. Twenty-five patients, 36 complete-arches, and 161 implants were placed. The overall mean angular deviation was 2.19° (SD 1.26°). The global platform and apex mean deviations were 1.17 mm (SD 0.57 mm), and 1.30 mm (SD 0.62 mm). Meaningful global platform (p = 0.0009) and apical (p = 0.0109) deviations were experienced only between healed and post-extraction sites. None of the analyzed variables significantly influenced angular deviation. Minor single-axis deviations were reported for the type of jaw (y-axis at implant platform and apex), registration algorithm (y-axis platform and z-axis deviations), and type of references for the fiducial-free algorithm. No statistically significant differences were found in relation to implant angulation. Within the study limitations navigation was reliable for complete-arch implant placement with immediate loading digitally pre-fabricated FDP. AI-driven surface anatomy identification and calibration protocol made fiducial-free registration as accurate as fiducial-based, teeth and bone screws equal as references. Implant site characteristics were the only statistically significant variable with healed sites reporting higher accuracy compared to post-extractive. Live-tracked navigation surgery enhanced operator performance and accuracy regardless of implant angulation and type of jaw. A mean safety room of about 1 mm and 2° should be considered.

Biventricular repair in low-weight patient with interrupted aortic arch and aortic atresia

BackgroundAortic atresia with ventricular septal defect is a very rare congenital cardiac anomaly, especially in combination with aortic arch interruption. It is always challenging to choose the optimal treatment tactics for such patients. One of the possible types of intervention is the Yasui procedure. There are only 19 reported cases in the literature of aortic atresia with interruption of the aortic arch type B or C, and not a single clinical case of type A.Case presentationThe proband was a 2-day-old boy with diagnosis: aortic atresia with a ventricular septal defect and interruption of the aortic arch type B. The child underwent a Yasui procedure without serious postoperative complications and with good long-term result.ConclusionsThe Yasui procedure in patients with aortic atresia and interrupted aortic arch can be performed with minimal complications, even in low-weight patients.

Comparing Transbrachial and Transradial as Alternatives to Transfemoral Access for Large-Bore Neuro Stenting: Insights From a Propensity-Matched Study

ObjectiveThis study aimed to evaluate the safety and effectiveness of transbrachial access (TBA) and transradial access (TRA) compared with transfemoral access (TFA) for large-bore neuro stenting (≥7 F). MethodsFrom January 2019 to January 2024, 4752 patients received large-bore neuro stenting in our center. The primary outcomes were procedural metrics. Safety outcomes were significant access site complications, including substantial hematoma, pseudoaneurysm, artery occlusion, and complications requiring treatment (medicine, intervention, or surgery). After propensity score matching with a ratio of 1:1:2 (TBA: TRA: TFA), adjusting for age, gender, aortic arch type, and neuro stenting as covariates, outcomes were compared between groups. ResultsForty-six TBA, 46 TRA and 92 TFA patients were enrolled. The mean age was 67.8 ± 11.2 years, comprising 127 (69.0%) carotid artery stenting and 57 (31.0%) vertebral artery stenting. The rates of technical success (TBA: 100%, TRA: 95.7%, TFA: 100%) and significant access site complications (TBA: 4.3%, TRA: 6.5%, TFA: 1.1%) were comparable between the groups (P>0.05). Compared to TFA, the TRA cohort exhibited significant delays in angiosuite arrival to puncture time (14 vs. 8 minutes, P = 0.039), puncture to angiography completion time (19 vs. 11 minutes, P = 0.027), and procedural duration (42 vs. 29 minutes, P = 0.031). There were no substantial differences in procedural time metrics between TBA (10, 14, and 31 minutes, respectively) and TFA. ConclusionsTBA and TRA as the primary access for large-bore neuro stenting are safe and effective. Procedural delays in TRA may favour TBA as the first-line alternative access to TFA.

Anatomical predispositions for silent cerebral infarction post carotid artery stenting: A retrospective cohort.

Silent cerebral infarction (SCI) that manifests following carotid artery stenting (CAS) has been postulated to correlate with cognitive decline, the onset of dementia, and an increased risk of subsequent cerebrovascular events. This investigation aimed to thoroughly examine the potential anatomical predispositions that are linked to the occurrence of SCI post-CAS, and further develop a predictive nomogram that could accurately forecast the risk of SCI post-CAS. The present investigation conducted a retrospective examination of datasets from 250 individuals presenting with carotid artery stenosis who had been subjected to CAS within a tertiary healthcare institution from June 2020 to November 2021. Stratified by the procedural date, participants were allocated into a training cohort and a validation cohort. A nomogram was constructed predicated on salient prognostic determinants discerned via a multivariate logistic regression analysis. An aggregate of 184 patients were incorporated into the study, of which 60 (32.6%) manifested SCI, whereas 124 (67.4%) did not. Within the training cohort (n=123), age (OR 1.08, 95%CI 1.01-1.16; P=0.034), aortic arch type (Type III vs. I: OR 10.79, 95%CI 2.12-54.81; P=0.005), aortic arch variant (OR 47.71, 95%CI 6.05-376.09; P<0.001), common carotid artery (CCA) ostium lesions (OR 6.93, 95%CI 1.49-32.32; P=0.014), and proximal tortuosity index (TI) (OR 1.01, 95%CI 1.00-1.02; P=0.029) were demarcated as standalone risk predispositions for SCI subsequent to CAS. The concordance index (C-index) for the training cohort's nomogram stood at 0.89 (95% CI, 0.84-0.95). Moreover, the said nomogram exhibited commendable efficacy within the validation cohort (C-index=0.94) as well as the entire participant base (C-index=0.90). Furthermore, the decision curve analysis illustrated the exemplary clinical applicability of the nomogram. The findings of this inquiry underscore that age, aortic arch type, aortic arch variant, CCA ostium lesions, and proximal TI serve as independent determinants linked with SCI post-CAS. The formulated nomogram, predicated on these risk factors, possesses robust prognostic significance and might serve as a valuable adjunct to inform clinical decision-making.

Distribution of Foot Arch Type and Associated Symptoms in Medical Students at Faculty of Medicine, Thammasat University

Objective: To determine the distribution of foot arch type, associated symptoms, and factors associated with moderate to severe pain Materials and Methods: The cross-sectional study was collected data from 5th year medical students, Faculty of Medicine, Thammasat University in academic year 2020. The distribution of foot arch type used the footprint and classified by Harris imprint index (HII), Chippaux-Smirak index (CSI), Staheli index (SI). The associated symptoms were collected into pain and tightness. Pain score was rated by the volunteer using numeric rating scale (NRS) at each foot/leg separately. Results: A total of ninety-eight medical students (196 feet) were recruited and analyzed. The distribution of foot arch type by HII, CSI and SI were 1) bilateral normal arched feet: 42.9%, 67.3%, 54.1% 2) bilateral pes planus: 8.2%, 12.2%, 21.4% 3) bilateral pes cavus: 25.5%, 6.1%, 5.1% 4) unilateral pes planus: 2%, 9.2%,15.3% 5) unilateral pes cavus: 21.4%, 5.1%, 4.1%, respectively. The most commonly associated symptom of pes planus was midfoot pain (17%) while pes cavus and normal arched foot were hindfoot pain (22.4% and 17.3%). The factor associated with moderate to severe pain was BMI ≥ 23 kg/m2 (OR = 3.23, 95%CI 1.63 - 6.41, p-value = 0.001). Conclusion: Bilateral normal arched feet were mostly found. Midfoot pain in pes planus and hindfoot pain in pes cavus and normal arched foot were the greatest symptoms. BMI was a risk factor.

3D Printing of Subclavian Artery: Utility for Preprocedural Planning and Correlation With Subclavian Artery Percutaneous Vascular Interventions.

Three-dimensional (3D) printing for subclavian artery (SA) percutaneous vascular interventions (PVI) may allow superior understanding of patient specific complex anatomy and aid with preprocedural planning. Five patients with computed tomography angiography (CTA) of the neck who underwent SA PVI were queried retrospectively. 3D printing of aortic arch and great vessels was accomplished with 3D slicer software and painted with acrylic paint to highlight anatomic features. The aortic arch type and implications for preprocedural planning for SA interventions including complex chronic total occlusion (CTO) lesions were determined. Comparisons were made with SA angiograms and 3D-CTA. Of the 5 patients, type I (n = 2), type II (n = 1), and type III (n = 2) aortic arches were identified. Proximal and distal reference vessel size and total lesion length were determined using a digital millimeter caliper and correlated with intraprocedural balloons and stents. In 3D-printed models (3D-PMs) of patients with SA-CTO (n = 2), cap morphology (tapered vs blunt) and distal vessel filling were visualized, permitting optimal arterial access site selection for successful cap crossing. The vertebral arteries (VAs) were also 3D printed which further allowed the ability to delineate optimal stent deployment site (proximal or distal to VA), a common dilemma that is faced intraprocedurally. The 3D-PMs also allowed preprocedural precision in stent and balloon size and length, potentially leading to procedural efficiency and cost-effectiveness. 3D printing of aortic arch and great vessel anatomy for SA-PVI allows multiple procedure-related factors to be predicted in advance, translating to decrease in contrast volume, radiation time, procedure and fluoroscopic time, thereby improving procedure and cost efficiency.

Outcomes of Transcarotid Artery Revascularization Versus Transfemoral Carotid Artery Stenting Based on Aortic Arch Type and Degree of Atherosclerosis

Outcomes of Transcarotid Artery Revascularization Versus Transfemoral Carotid Artery Stenting Based on Aortic Arch Type and Degree of Atherosclerosis

Successful one-stage surgical repair in a rare adult patient with berry syndrome.

Berry syndrome is a rare congenital cardiac malformation, herein we report an adult male patient who was successfully repaired by one-stage surgery. 18-year-old male patient presenting symptoms of chest tightness and shortness for over a year presented to outpatient clinic in our department to have corrective procedure heart. CTA revealed an Aortopulmonary Window (APW) type III, measuring 4.6 cm in maximum diameter. The right pulmonary artery originated from the ascending aorta, and the pulmonary trunk exhibited dilation with dimensions of 8.3 cm × 5.7 cm × 5.9 cm. Additional findings included Interrupted Aortic Arch (IAA) type A, intact ventricular septum, and Patent Ductus Arteriosus (PDA). Echocardiography showed bidirectional shunt at the level of APW in severe pulmonary hypertension. The right heart catheterization indicated a mean pulmonary artery pressure of 70mmHg and a pulmonary artery resistance of 5 Wood units. We evaluated after two weeks of treatment with epoprostenol at a rate of 20 ng/(kg. min) and found a significant improvement in pulmonary-artery pressure. Finally, we communicated with the patient's family and decided to proceed with the procedure. For complex cardiovascular malformations, the ideal treatment strategy must be tailored to the characteristics of the patient to provide maximum efficacy and safety.

Sensitivity of Post-TAVR Hemodynamics to the Distal Aortic Arch Anatomy: A High-Fidelity CFD Study.

Patient-specific simulations of transcatheter aortic valve (TAV) using computational fluid dynamics (CFD) often rely on assumptions regarding proximal and distal anatomy due to the limited availability of high-resolution imaging away from the TAV site and the primary research focus being near the TAV. However, the influence of these anatomical assumptions on computational efficiency and resulting flow characteristics remains uncertain. This study aimed to investigate the impact of different distal aortic arch anatomies-some of them commonly used in literature-on flow and hemodynamics in the vicinity of the TAV using large eddy simulations (LES). Three aortic root anatomical configurations with four representative distal aortic arch types were considered in this study. The arch types included a 90-degree bend, an idealized distal aortic arch anatomy, a clipped version of the idealized distal aortic arch, and an anatomy extruded along the normal of segmented anatomical boundary. Hemodynamic parameters both instantaneous and time-averaged such as Wall Shear Stress (WSS), and Oscillatory Shear Index (OSI) were derived and compared from high-fidelity CFD data. While there were minor differences in flow and hemodynamics across the configurations examined, they were generally not significant within our region of interest i.e., the aortic root. The choice of extension type had a modest impact on TAV hemodynamics, especially in the vicinity of the TAV with variations observed in local flow patterns and parameters near the TAV. However, these differences were not substantial enough to cause significant deviations in the overall flow and hemodynamic characteristics. The results suggest that under the given configuration and boundary conditions, the type of outflow extension had a modest impact on hemodynamics proximal to the TAV. The findings contribute to a better understanding of flow dynamics in TAV configurations, providing insights for future studies in TAV-related experiments as well as numerical simulations. Additionally, they help mitigate the uncertainties associated with patient-specific geometries, offering increased flexibility in computational modeling.