Type II-A System Research Articles

Cas9 interaction with the tracrRNA nexus modulates the repression of type II-A CRISPR-cas genes.

Immune responses need to be regulated to prevent autoimmunity. CRISPR-Cas systems provide adaptive immunity in prokaryotes through the acquisition of short DNA sequences from invading viruses (bacteriophages), known as spacers. Spacers are inserted into the CRISPR locus and serve as templates for the transcription of guides used by RNA-guided nucleases to recognize complementary nucleic acids of the invaders and start the CRISPR immune response. In type II-A CRISPR systems, Cas9 uses the guide RNA to cleave target DNA sequences in the genome of infecting phages, and the tracrRNA to bind the promoter of cas genes and repress their transcription. We previously isolated a Cas9 mutant carrying the I473F substitution that increased the frequency of spacer acquisition by 2-3 orders of magnitude, leading to a fitness cost due to higher levels of autoimmunity. Here, we investigated the molecular basis underlying these findings. We found that the I473F mutation decreases the association of Cas9 to tracrRNA, limiting its repressor function, leading to high levels of expression of cas genes, which in turn increase the strength of the type II-A CRISPR-Cas immune response. We obtained similar results for a related type II-A system, and therefore our findings highlight the importance of the interaction between Cas9 and its tracrRNA cofactor in tuning the immune response to balanced levels that enable phage defense but avoid autoimmunity.

Diversity of CRISPR-Cas type II-A systems in Streptococcus anginosus.

Streptococcus anginosus is a commensal Streptococcal species that is often associated with invasive bacterial infections. However, little is known about its molecular genetic background. Many Streptococcal species, including S. anginosus, harbor clustered regularly interspaced short palindromic repeats (CRISPR)-Cas systems. A CRISPR-Cas type II-A system as well as a type II-C system have been reported for this species. To characterize the CRISPR-Cas type II systems of S. anginosus in more detail, we conducted a phylogenetic analysis of Cas9 sequences from CRISPR-Cas type II systems with a special focus on streptococci and S. anginosus. In addition, a phylogenetic analysis of S. anginosus strains based on housekeeping genes included in MLST analysis, was performed. All analyzed Cas9 sequences of S. anginosus clustered with the Cas9 sequences of CRISPR type II-A systems, including the Cas9 sequences of S. anginosus strains reported to harbor a type II-C system. The Cas9 genes of the CRISPR-Cas type II-C systems of other bacterial species separated into a different cluster. Moreover, analyzing the CRISPR loci found in S. anginosus, two distinct csn2 genes could be detected, a short form showing high similarity to the canonical form of the csn2 gene present in S. pyogenes. The second CRISPR type II locus of S. anginosus contained a longer variant of csn2 with close similarities to a csn2 gene that has previously been described in Streptococcus thermophilus. Since CRISPR-Cas type II-C systems do not contain a csn2 gene, the S. anginosus strains reported to have a CRISPR-Cas type II-C system appear to carry a variation of CRISPR-Cas type II-A harboring a long variant of csn2.

Improving the on-target activity of high-fidelity Cas9 editors by combining rational design and random mutagenesis.

Genomic and post-genomic editors based on CRISPR/Cas systems are widely used in basic research and applied sciences, including human gene therapy. Most genome editing tools are based on the CRISPR/Cas9 type IIA system from Streptococcus pyogenes. Unfortunately, a number of drawbacks have hindered its application in therapeutic approaches, the most serious of which is the relatively high level of off-targets. To overcome this obstacle, various high-fidelity Cas9 variants have been created. However, they show reduced on-target activity compared to wild-type Cas9 possibly due to increased sensitivity to eukaryotic chromatin. Here, we combined a rational approach with random mutagenesis to create a set of new Cas9 variants showing high specificity and increased activity in Saccharomyces cerevisiae yeast. Moreover, a novel mutation in the PAM (protospacer adjacent motif)-interacting Cas9 domain was found, which increases the on-target activity of high-fidelity Cas9 variants while retaining their high specificity. The obtained data suggest that this mutation acts by weakening the eukaryotic chromatin barrier for Cas9 and rearranging the RuvC active center. Improved Cas9 variants should further advance genome and post-genome editing technologies. KEY POINTS: • D147Y and P411T mutations increase the activity of high-fidelity Cas9 variants. • The new L1206P mutation further increases the activity of high-fidelity Cas9 variants. • The L1206P mutation weakens the chromatin barrier for Cas9 editors.

Unique properties of spacer acquisition by the type III-A CRISPR-Cas system.

Type III CRISPR-Cas systems have a unique mode of interference, involving crRNA-guided recognition of nascent RNA and leading to DNA and RNA degradation. How type III systems acquire new CRISPR spacers is currently not well understood. Here, we characterize CRISPR spacer uptake by a type III-A system within its native host, Streptococcus thermophilus. Adaptation by the type II-A system in the same host provided a basis for comparison. Cas1 and Cas2 proteins were critical for type III adaptation but deletion of genes responsible for crRNA biogenesis or interference did not detectably change spacer uptake patterns, except those related to host counter-selection. Unlike the type II-A system, type III spacers are acquired in a PAM- and orientation-independent manner. Interestingly, certain regions of plasmids and the host genome were particularly well-sampled during type III-A, but not type II-A, spacer uptake. These regions included the single-stranded origins of rolling-circle replicating plasmids, rRNA and tRNA encoding gene clusters, promoter regions of expressed genes and 5′ UTR regions involved in transcription attenuation. These features share the potential to form DNA secondary structures, suggesting a preferred substrate for type III adaptation. Lastly, the type III-A system adapted to and protected host cells from lytic phage infection.

Primed CRISPR-Cas Adaptation and Impaired Phage Adsorption in Streptococcus mutans.

ABSTRACTStreptococcus mutans strain P42S possesses a type II-A CRISPR-Cas system that protects against phage infection and plasmid transformation. The analysis of 293 bacteriophage-insensitive mutants (BIMs) obtained upon exposure to the virulent phage M102AD revealed the acquisition of 399 unique spacers, including several ectopic spacer acquisitions and a few cases of native spacer deletions. The acquisition of multiple spacers was also observed and appears to be mostly due to priming, which has been rarely reported for type II-A systems. Analyses of the acquired spacers indicated that 88% of them are identical to a region of the phage M102AD genome. The remaining 12% of spacers had mismatches with the phage genome, primarily at the 5′ end of the spacer, leaving the seed sequence at the 3′ end largely intact. When a high multiplicity of infection (MOI) was used in the phage challenge assays, we also observed the emergence of CRISPR BIMs that, in addition to the acquisition of new spacers, displayed a reduced phage adsorption phenotype. While CRISPR-Cas and adsorption resistance work in tandem to protect S. mutans P42S against phage M102AD, nonidentified antiviral mechanisms are also likely at play in this strain.IMPORTANCE Bacteria are under the constant threat of viral predation and have therefore developed several defense mechanisms, including CRISPR-Cas systems. While studies on the mode of action of CRISPR-Cas systems have already provided great insights into phage-bacterium interactions, still more information is needed on the biology of these systems. The additional characterization of the type II-A CRISPR-Cas system of Streptococcus mutans P42S in this study provides novel information on the spacer acquisition step, especially regarding protospacer-adjacent motif (PAM) recognition, multiple-spacer acquisition, and priming.

Ectopic Spacer Acquisition in Streptococcus thermophilus CRISPR3 Array.

Streptococcus thermophilus relies heavily on two type II-A CRISPR-Cas systems, CRISPR1 and CRISPR3, to resist siphophage infections. One hallmark of these systems is the integration of a new spacer at the 5′ end of the CRISPR arrays following phage infection. However, we have previously shown that ectopic acquisition of spacers can occur within the CRISPR1 array. Here, we present evidence of the acquisition of new spacers within the array of CRISPR3 of S. thermophilus. The analysis of randomly selected bacteriophage-insensitive mutants of the strain Uy01 obtained after phage infection, as well as the comparison with other S. thermophilus strains with similar CRISPR3 content, showed that a specific spacer within the array could be responsible for misguiding the adaptation complex. These results also indicate that while the vast majority of new spacers are added at the 5′ end of the CRISPR array, ectopic spacer acquisition is a common feature of both CRISPR1 and CRISPR3 systems in S. thermophilus, and it can still provide phage resistance. Ectopic spacer acquisition also appears to have occurred naturally in some strains of Streptococcus pyogenes, suggesting that it is a general phenomenon, at least in type II-A systems.

CRISPR type II-A subgroups exhibit phylogenetically distinct mechanisms for prespacer insertion

CRISPR-Cas is an adaptive immune system that protects prokaryotes against foreign nucleic acids. Prokaryotes gain immunity by acquiring short pieces of the invading nucleic acid termed prespacers and inserting them into their CRISPR array. In type II-A systems, Cas1 and Cas2 proteins insert prespacers always at the leader-repeat junction of the CRISPR array. Among type II-A CRISPR systems, three distinct groups (G1, G2, and G3) exist according to the extent of DNA sequence conservation at the 3' end of the leader. However, the mechanisms by which these conserved motifs interact with their cognate Cas1 and Cas2 proteins remain unclear. Here, we performed in vitro integration assays, finding that for G1 and G2, the insertion site is recognized through defined mechanisms, at least in members examined to date, whereas G3 exhibits no sequence-specific insertion. G1 first recognized a 12-bp sequence at the leader-repeat junction and performed leader-side insertion before proceeding to spacer-side insertion. G2 recognized the full repeat sequence and could perform independent leader-side or spacer-side insertions, although the leader-side insertion was faster than spacer-side. The prespacer morphology requirements for Cas1-Cas2 varied, with G1 stringently requiring a 5-nucleotide 3' overhang and G2 being able to insert many forms of prespacers with variable efficiencies. These results highlight the intricacy of protein-DNA sequence interactions within the seemingly similar type II-A integration complexes and provide mechanistic insights into prespacer insertion. These interactions can be fine-tuned to expand the Cas1-Cas2 toolset for inserting small DNAs into diverse DNA targets.

A short overview of the CRISPR-Cas adaptation stage.

CRISPR research began over 30 years ago with the incidental discovery of an unusual nucleotide arrangement in the Escherichia coli genome. It took 20 years to find the main function of CRISPR-Cas systems as an adaptive defence mechanism against invading nucleic acids, and our knowledge of their biology has steadily increased ever since. In parallel, the number of applications derived from CRISPR-Cas systems has risen spectacularly. The CRISPR-based genome editing tool is arguably the most exciting application in both basic and applied research. Lately, CRISPR-Cas research has partially shifted to the least understood aspect of its biology: the ability of CRISPR-Cas systems to acquire new immunities during the so-called adaptation step. To date, the most efficient natural system to readily acquire new spacers is the type II-A system of the gram-positive dairy bacterium Streptococcus thermophilus. The discovery of additional systems able to acquire new spacers will hopefully draw more attention to this step of CRISPR-Cas biology. This review focuses on the breakthroughs that have helped to unravel the adaptation phase and on questions that remain to be answered.

Characterization and comparison of CRISPR Loci in Streptococcus thermophilus.

Clustered regularly interspaced short palindromic repeats (CRISPR) consists of a series of regular repeat-spacer sequences. It can not only act as a natural immune system in most prokaryotes, but also be utilized as the tool of newly developed genome modification and evolutionary researches. Streptococcus thermophilus is an important model organism for the study and application of CRISPR systems. In present study, the occurrence and diversity of CRISPR-Cas systems in the genomes of S. thermophilus were investigated including 4 new sequenced strains CS5, CS9, CS18, CS20, and other 23 strains downloaded from NCBI website. 66 CRISPR/Cas systems were identified among these 27 strains and could divided into four subsystems according to the arrangement of Cas proteins, notably I-E, II-A, II-C and III-A. Overall, 26 type II-C systems, 18 type II-A systems, 13 type III-A systems, 9 type I-E systems were identified. It was mentioned that CS20 contained two type II-C systems which had not been identified in the other 26 S. thermophilus strains. Overall, 1,080 spacers were analyzed and blasted. Sequence identity searches of spacers implied that most spacers derived from partial sequences of exogenous DNA, including various bacteriophages and plasmids. Of note, a large number of novel spacers were found in this study, indicating the unique phage environment they have undergone, especially CS20 strain. In addition, the analysis of the cas1 and cas9 genes revealed the genetic relationship among CRISPR-Cas system in these strains. Furthermore, the analysis of CRISPR spacers also indicated protospacer adjacent motif (PAM) sequences. Summary of PAM sequences could lay the foundations for the application of S. thermophilus CRISPR-Cas system. Our results suggested CS5 and CS18 can be used as model strains in the research of CRISPR-Cas system, and CS20 might have greater application potential in gene editing.

Outcomes and characterization of chromosomal self-targeting by native CRISPR-Cas systems in Streptococcus thermophilus

CRISPR-Cas systems provide adaptive immunity against phages in prokaryotes via DNA-encoded, RNA-mediated, nuclease-dependent targeting and cleavage. Due to inefficient and relatively limited DNA repair pathways in bacteria, CRISPR-Cas systems can be repurposed for lethal DNA targeting that selects for sequence variants. In this study, the relative killing efficiencies of endogenous Type I and Type II CRISPR-Cas systems in the model organism Streptococcus thermophilus DGCC7710 were assessed. Additionally, the genetic and phenotypic outcomes of chromosomal targeting by plasmid-programmed Type I-E or Type II-A systems were analyzed. Efficient killing was observed using both systems, in a dose-dependent manner when delivering 0.4-400 ng of plasmid DNA. Targeted PCR screening and genome sequencing were used to determine the genetic basis enabling survival, showing that evasion of Type I-E self-targeting was primarily the result of low-frequency defective plasmids that excised the targeting spacer. The most notable genotype recovered from Type II-A targeting of genomic locus, lacZ, was a 34 kb-deletion derived from homologous recombination (HR) between identical conserved sequences in two separate galE coding regions, resulting in 2% loss of the genome. Collectively, these results suggest that HR contributes to the plasticity and remodeling of bacterial genomes, leading to evasion of genome targeting by CRISPR-Cas systems.

Characterization and distribution of CRISPR-Cas systems in Lactobacillus sakei.

Clustered regularly interspaced palindromic repeats (CRISPR)-Cas (CRISPR-associated) structures, known as prokaryotes 'immune system', have been successfully applied for genetic engineering and genotyping purposes for a variety of microorganisms. Here we investigated 50 Lactobacillus (L.) sakei genomes and found 13 of them as CRISPR-Cas positive. The majority of positive genomes contain type II-A system, which appears to be widespread across food born lactic acid bacteria. However, a type II-C system with low similarity in Cas protein sequence to related II-C structures is rarely present in the genomes. We depicted a correlation between prophages integrated in the genomes and the presence/absence of CRISPR-Cas systems and identified the novel protospacer adjunction motifs (PAMs) (a/g)AAA for the II-A and (g/a)(c/t)AC for the II-C system including the corresponding tracrRNAs, creating the basis for the development of new Cas-mediated genome editing tools. Moreover, we performed a PCR screening for 81 selected L. sakei isolates and identified 25 (31%) isolates as CRISPR-Cas positive with hypervariable spacer content. Comparative sequence analysis of 33 repeat-spacer arrays resulted in 18 CRISPR genotypes, revealing insights into evolutionary relationships between different strains and illustrating possible applications for the research and development of starter cultures, e.g., the usage for strain differentiation in assertiveness experiments or the development of bacteriophage-resistant strains.

Characterizing the activity of abundant, diverse and active CRISPR-Cas systems in lactobacilli

CRISPR-Cas systems provide immunity against phages and plasmids in bacteria and archaea. Despite the popularity of CRISPR-Cas9 based genome editing, few endogenous systems have been characterized to date. Here, we sampled 1,262 publically available lactobacilli genomes found them to be enriched with CRISPR-Cas adaptive immunity. While CRISPR-Cas is ubiquitous in some Lactobacillus species, CRISPR-Cas content varies at the strain level in most Lactobacillus species. We identified that Type II is the most abundant type across the genus, with II-A being the most dominant sub-type. We found that many Type II-A systems are actively transcribed, and encode spacers that efficiently provide resistance against plasmid uptake. Analysis of various CRISPR transcripts revealed that guide sequences are highly diverse in terms of crRNA and tracrRNA length and structure. Interference assays revealed highly diverse target PAM sequences. Lastly, we show that these systems can be readily repurposed for self-targeting by expressing an engineered single guide RNA. Our results reveal that Type II-A systems in lactobacilli are naturally active in their native host in terms of expression and efficiently targeting invasive and genomic DNA. Together, these systems increase the possible Cas9 targeting space and provide multiplexing potential in native hosts and heterologous genome editing purpose.

A functional type II-A CRISPR-Cas system from Listeria enables efficient genome editing of large non-integrating bacteriophage.

CRISPR–Cas systems provide bacteria with adaptive immunity against invading DNA elements including bacteriophages and plasmids. While CRISPR technology has revolutionized eukaryotic genome engineering, its application to prokaryotes and their viruses remains less well established. Here we report the first functional CRISPR–Cas system from the genus Listeria and demonstrate its native role in phage defense. LivCRISPR-1 is a type II-A system from the genome of L. ivanovii subspecies londoniensis that uses a small, 1078 amino acid Cas9 variant and a unique NNACAC protospacer adjacent motif. We transferred LivCRISPR-1 cas9 and trans-activating crRNA into Listeria monocytogenes. Along with crRNA encoding plasmids, this programmable interference system enables efficient cleavage of bacterial DNA and incoming phage genomes. We used LivCRISPR-1 to develop an effective engineering platform for large, non-integrating Listeria phages based on allelic replacement and CRISPR-Cas-mediated counterselection. The broad host-range Listeria phage A511 was engineered to encode and express lysostaphin, a cell wall hydrolase that specifically targets Staphylococcus peptidoglycan. In bacterial co-culture, the armed phages not only killed Listeria hosts but also lysed Staphylococcus cells by enzymatic collateral damage. Simultaneous killing of unrelated bacteria by a single phage demonstrates the potential of CRISPR–Cas-assisted phage engineering, beyond single pathogen control.

How type II CRISPR-Cas establish immunity through Cas1-Cas2-mediated spacer integration.

CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) and the nearby cas (CRISPR-associated) operon establish an RNA-based adaptive immunity system in prokaryotes1–5. Molecular memory is created when a short foreign DNA-derived prespacer is integrated into the CRISPR array as a new spacer6–9. Whereas the RNA-guided CRISPR interference mechanism varies widely among CRISPR-Cas systems, the spacer integration mechanism is essentially identical7–9. The conserved Cas1 and Cas2 proteins form an integrase complex consisting two distal Cas1 dimers bridged by a Cas2 dimer in the middle6,10. The prespacer is bound by Cas1-Cas2 as a dual forked DNA, and the terminal 3′-OH of each 3′-overhang serves as an attacking nucleophile during integration11–14. Importantly, the prespacer is preferentially integrated into the leader-proximal region of the CRISPR array1,7,10,15, guided by the leader sequence and a pair of inverted repeats (IRs) inside the CRISPR repeat7,15–20. Spacer integration in the most well-studied Escherichia coli Type I-E CRISPR system further relies on the bacterial Integration Host Factor (IHF)21,22. In Type II-A CRISPR, however, Cas1-Cas2 alone integrates spacer efficiently in vitro18; other Cas proteins (Cas9 and Csn2) play accessory roles in prespacer biogenesis17,23. Focusing on the Enterococcus faecalis Type II-A system24, here we report four structure snapshots of Cas1-Cas2 during spacer integration. EfaCas1-Cas2 selectively binds to a splayed 30-bp prespacer bearing 4-nt 3′-overhangs. Three molecular events take place upon encountering a target: Cas1-Cas2/prespacer first searches for half-sites stochastically, then preferentially interacts with the leader-side CRISPR repeat and catalyzes a nucleophilic attack that connects one strand of the leader-proximal repeat to the prespacer 3′-overhang. Recognition of the spacer half-site requires DNA bending and leads to full integration. We derive a mechanistic framework explaining the stepwise spacer integration process and the leader-proximal preference.

Investigating the molecular mechanism of CRISPR-Cas adaptation of Streptococcus thermophilus

Abstract Bacteria are constantly challenged by viral infection. In order to combat potentially lethal viruses, bacteria possess adaptive immune defenses called CRISPR-Cas (Clustered Regularly Interspaced Short Palindromic Repeats-CRISPR-Associated) systems. These systems are RNA-based defense systems that memorize past viral infections to protect prokaryotes like bacteria from future infections. The acquisition of short DNA sequences (spacers) from previously encountered invaders allows bacteria to generate immunity. These systems capture spacers and incorporated them into their CRISPR loci to initialize immunity. Once integrated, spacers are then transcribed and processed into small RNA molecules called crRNAs, which are eventually bound by Cas proteins and form targeting complexes capable of cleaving viral DNA to achieve immunity. Genetic evidence indicates that Cas1, Cas2, Cas9 and Csn2 are each essential for CRISPR adaptation in the Type II-A system of Streptococcus thermophilus. However, the role of each of these proteins in adaptation is not clear. We have systematically constructed single cas gene deletion strains. We aim to detect and analyze low level of adaptation events in these genetic backgrounds, and in turn gain insight into the specific roles of each of these proteins. We also plan to apply biochemical approaches using purified proteins to investigate the molecular mechanistic steps of adaptation.

Analysis of the type II-A CRISPR-Cas system of Streptococcus agalactiae reveals distinctive features according to genetic lineages.

CRISPR-Cas systems (clustered regularly interspaced short palindromic repeats/CRISPR-associated proteins) are found in 90% of archaea and about 40% of bacteria. In this original system, CRISPR arrays comprise short, almost unique sequences called spacers that are interspersed with conserved palindromic repeats. These systems play a role in adaptive immunity and participate to fight non-self DNA such as integrative and conjugative elements, plasmids, and phages. In Streptococcus agalactiae, a bacterium implicated in colonization and infections in humans since the 1960s, two CRISPR-Cas systems have been described. A type II-A system, characterized by proteins Cas9, Cas1, Cas2, and Csn2, is ubiquitous, and a type I–C system, with the Cas8c signature protein, is present in about 20% of the isolates. Unlike type I–C, which appears to be non-functional, type II-A appears fully functional. Here we studied type II-A CRISPR-cas loci from 126 human isolates of S. agalactiae belonging to different clonal complexes that represent the diversity of the species and that have been implicated in colonization or infection. The CRISPR-cas locus was analyzed both at spacer and repeat levels. Major distinctive features were identified according to the phylogenetic lineages previously defined by multilocus sequence typing, especially for the sequence type (ST) 17, which is considered hypervirulent. Among other idiosyncrasies, ST-17 shows a significantly lower number of spacers in comparison with other lineages. This characteristic could reflect the peculiar virulence or colonization specificities of this lineage.

Sequences spanning the leader-repeat junction mediate CRISPR adaptation to phage in Streptococcus thermophilus.

CRISPR-Cas systems are RNA-based immune systems that protect prokaryotes from invaders such as phages and plasmids. In adaptation, the initial phase of the immune response, short foreign DNA fragments are captured and integrated into host CRISPR loci to provide heritable defense against encountered foreign nucleic acids. Each CRISPR contains a ∼100–500 bp leader element that typically includes a transcription promoter, followed by an array of captured ∼35 bp sequences (spacers) sandwiched between copies of an identical ∼35 bp direct repeat sequence. New spacers are added immediately downstream of the leader. Here, we have analyzed adaptation to phage infection in Streptococcus thermophilus at the CRISPR1 locus to identify cis-acting elements essential for the process. We show that the leader and a single repeat of the CRISPR locus are sufficient for adaptation in this system. Moreover, we identified a leader sequence element capable of stimulating adaptation at a dormant repeat. We found that sequences within 10 bp of the site of integration, in both the leader and repeat of the CRISPR, are required for the process. Our results indicate that information at the CRISPR leader-repeat junction is critical for adaptation in this Type II-A system and likely other CRISPR-Cas systems.

CRISPR-Cas: an efficient tool for genome engineering of virulent bacteriophages.

Bacteriophages are now widely recognized as major players in a wide variety of ecosystems. Novel genes are often identified in newly isolated phages as well as in environmental metavirome studies. Most of these novel viral genes have unknown functions but appear to be coding for small, non-structural proteins. To understand their biological role, very efficient genetic tools are required to modify them, especially in the genome of virulent phages. We first show that specific point mutations and large deletions can be engineered in the genome of the virulent phage 2972 using the Streptococcus thermophilus CRISPR-Cas Type II-A system as a selective pressure to increase recombination efficiencies. Of significance, all the plaques tested contained recombinant phages with the desired mutation. Furthermore, we show that the CRISPR-Cas engineering system can be used to efficiently introduce a functional methyltransferase gene into a virulent phage genome. Finally, synthetic CRISPR bacteriophage insensitive mutants were constructed by cloning a spacer-repeat unit in a low-copy vector illustrating the possibility to target multiple regions of the phage genome. Taken together, this data shows that the CRISPR-Cas system is an efficient and adaptable tool for editing the otherwise intractable genomes of virulent phages and to better understand phage-host interactions.

The three major types of CRISPR-Cas systems function independently in CRISPR RNA biogenesis in Streptococcus thermophilus.

CRISPR-Cas systems are small RNA-based immune systems that protect prokaryotes from invaders such as viruses and plasmids. We have investigated the features and biogenesis of the CRISPR (cr)RNAs in Streptococcus thermophilus (Sth) strain DGCC7710, which possesses four different CRISPR-Cas systems including representatives from the three major types of CRISPR-Cas systems. Our results indicate that the crRNAs from each CRISPR locus are specifically processed into divergent crRNA species by Cas proteins (and non-coding RNAs) associated with the respective locus. We find that the Csm Type III-A and Cse Type I-E crRNAs are specifically processed by Cas6 and Cse3 (Cas6e), respectively, and retain an 8-nucleotide CRISPR repeat sequence tag 5' of the invader-targeting sequence. The Cse Type I-E crRNAs also retain a 21-nucleotide 3' repeat tag. The crRNAs from the two Csn Type II-A systems in Sth consist of a 5'-truncated targeting sequence and a 3' tag; however, these are distinct in size between the two. Moreover, the Csn1 (Cas9) protein associated with one Csn locus functions specifically in the production of crRNAs from that locus. Our findings indicate that multiple CRISPR-Cas systems can function independently in crRNA biogenesis within a given organism - an important consideration in engineering coexisting CRISPR-Cas pathways.

Adaptation of theHaloarcula hispanicaCRISPR-Cas system to a purified virus strictly requires a priming process

The clustered regularly interspaced short palindromic repeat (CRISPR)-Cas system mediates adaptive immunity against foreign nucleic acids in prokaryotes. However, efficient adaptation of a native CRISPR to purified viruses has only been observed for the type II-A system from a Streptococcus thermophilus industry strain, and rarely reported for laboratory strains. Here, we provide a second native system showing efficient adaptation. Infected by a newly isolated virus HHPV-2, Haloarcula hispanica type I-B CRISPR system acquired spacers discriminatively from viral sequences. Unexpectedly, in addition to Cas1, Cas2 and Cas4, this process also requires Cas3 and at least partial Cascade proteins, which are involved in interference and/or CRISPR RNA maturation. Intriguingly, a preexisting spacer partially matching a viral sequence is also required, and spacer acquisition from upstream and downstream sequences of its target sequence (i.e. priming protospacer) shows different strand bias. These evidences strongly indicate that adaptation in this system strictly requires a priming process. This requirement, if validated also true for other CRISPR systems as implied by our bioinformatic analysis, may help to explain failures to observe efficient adaptation to purified viruses in many laboratory strains, and the discrimination mechanism at the adaptation level that has confused scientists for years.