Two-dimensional Metal-halide Perovskites Research Articles

Temperature-Dependent Chirality in Halide Perovskites.

With the use of chiral organic cations in two-dimensional metal halide perovskites, chirality can be induced in the metal halide layers, which results in semiconductors with intriguing chiral optical and spin-selective transport properties. The chiral properties strongly depend upon the temperature, despite the basic crystal symmetry not changing fundamentally. We identify a set of descriptors that characterize the chirality of metal halide perovskites, such as MBA2PbI4, and study their temperature dependence using molecular dynamics simulations with on-the-fly machine-learning force fields obtained from density functional theory calculations. We find that, whereas the arrangement of organic cations remains chiral upon increasing the temperature, the inorganic framework loses this property more rapidly. We ascribe this to the breaking of hydrogen bonds that link the organic with the inorganic substructures, which leads to a loss of chirality transfer.

Heterostructures via a Solution-Based Anion Exchange in Microcrystalline 2D Layered Metal-Halide Perovskites.

Layered perovskites consist of stacks of inorganic semiconducting metal-halide octahedra lattices sandwiched between organic layers with typically dielectric behavior. The in-plane confinement of electrical carriers in such two-dimensional metal halide perovskites drives a large range of appealing electronic properties, such as strong exciton binding, anisotropic charge diffusion, and polarization-directionality. Heterostructures provide additional control on carrier diffusion and localization, and in-plane heterojunctions are interesting because of the associated high charge mobility. Here, this work demonstrates a versatile solution-based approach to fabricate in-plane heterostructures with different halide composition in two-dimensional lead-halide perovskite microcrystals. This leads to spatially separated halide phases with different band gap and light emission. Interestingly, the composition of the exchanged phase and the morphology of the phase boundary depends on the exchange route, which can be related to the preferred localization of the halides at the equatorial or axial octahedra positions that either leads to dissolution and recrystallization of the octahedra lattice (for bromide to iodide), or allows for ion diffusion within the lattice (for iodide to bromide). These detailed insights on the ion exchange processes in layered perovskites will stimulate the development of heterostructures that can be tailored for different applications such as photocatalysis, energy storage, and light emission.

Materials design and preparation of ultrathin two-dimensional metal halide perovskites

Materials design and preparation of ultrathin two-dimensional metal halide perovskites

Exciton dynamics in two-dimensional metal halide perovskite: The impact of film processing.

We investigate the hot carrier and exciton dynamics in two-dimensional (2D) metal halide perovskites using time-resolved spectroscopy. 2D perovskite films were prepared with and without dimethyl sulfoxide treatment to elucidate the effect of film processing techniques on optoelectronic properties. Femtosecond transient absorption measurements reveal that the charge carrier dynamics are different in the two samples, and excitons survive for a longer time in the treated sample than the untreated one. While the early-time carrier dynamics in the untreated sample are dominated by charges trapped by defect states, the hot free carriers govern the dynamics in the treated sample due to fewer defects in it. Morphological and other spectroscopic studies, including time-resolved photoluminescence, further suggest the formation of more defects in the untreated sample. These results can guide the future development of efficient 2D perovskite-based optoelectronic devices.

Dual-Hyperspectral Optical Pump-Probe Microscopy with Single-Nanosecond Time Resolution.

In recent years, optical pump-probe microscopy (PPM) has become a vital technique for spatiotemporally imaging electronic excitations and charge-carrier transport in metals and semiconductors. However, existing methods are limited by mechanical delay lines with a probe time window up to several nanoseconds (ns) or monochromatic pump and probe sources with restricted spectral coverage and temporal resolution, hindering their amenability in studying relatively slow processes. To bridge these gaps, we introduce a dual-hyperspectral PPM setup with a time window spanning from nanoseconds to milliseconds and single-nanosecond resolution. Our method features a wide-field probe tunable from 370 to 1000 nm and a pump spanning from 330 nm to 16 μm. We apply this PPM technique to study various two-dimensional metal-halide perovskites (2D-MHPs) as representative semiconductors by imaging their transient responses near the exciton resonances under both above-band gap electronic pump excitation and below-band gap vibrational pump excitation. The resulting spatially and temporally resolved images reveal insights into heat dissipation, film uniformity, distribution of impurity phases, and film-substrate interfaces. In addition, the single-nanosecond temporal resolution enables the imaging of in-plane strain wave propagation in 2D-MHP single crystals. Our method, which offers extensive spectral tunability and significantly improved time resolution, opens new possibilities for the imaging of charge carriers, heat, and transient phase transformation processes, particularly in materials with spatially varying composition, strain, crystalline structure, and interfaces.

Two-dimensional hybrid perovskite crystals for highly sensitive and stable UV light detector

Two-dimensional metal halide perovskites (2D MHPs) are promising candidates for ultraviolet (UV) light detection due to their narrow band gap and high stability in the air atmosphere. MHP crystals, with fewer defects and grain boundaries than polycrystalline films, are more suitable for photodetectors and other advanced semiconductor devices. In this paper, aimed to fabricate high-performance UV light detector, a series of high-quality and large-sized 2D perovskite crystals with the composition of (BA)2Pb(ClxBr1-x)4 were prepared and the best UV responsibility was found in the (BA)2Pb(Cl0.1Br0.9)4 crystal. Despite the detector was fabricated by the simple silver brushing method, it exhibits high responsivity of 3.19 mA/W, high detection rate of 3.87 × 1011 Jones, and fast response speed to UV light of 340 nm under the bias of 20 V. Moreover, the detector shows remarkable light sensitivity even under extremely weak UV illumination of 5.4 μW/cm2 and satisfactory stability during a long-duration switching operation. The excellent light response performance of the (BA)2Pb(Cl0.1Br0.9)4 detector was ascribed to the very low dark current (0.84 pA) of the detector, which highly relies on the crystal quality of the light-absorbing perovskites. The relationship between the structural and the compositional characteristics of (BA)2Pb(Cl0.1Br0.9)4 and its light response property was analyzed. This work provides a promising candidate material for sensitive UV detection and high-performance photodetectors.

Achieving Ultralong Room-Temperature Phosphorescence in Two-Dimensional Metal Halide Perovskites by Alkyl Chain Engineering.

Two-dimensional (2D) metal halide perovskites with highly efficient ultralong room-temperature phosphorescence (URTP) are rare due to their uncertain structures and complicated intermolecular interactions. Herein, by varying the alkyl length of organic units, we synthesized two single-component 2D metal hybrid perovskites, i.e., B-MACC and B-EACC, with obvious URTP emission. In particular, B-EACC exhibits a green-yellow URTP emission with an ultralong lifetime (579 ms) and a high efficiency (14.86%). It is found that the molecular packing of B-EA+ cations because of the presence one more carbon in the alkyl chain affords strong hydrogen bonding and π-π stacking interactions, which immobilizes and reduces the triplet exciton quenching. Moreover, B-MACC and B-EACC with space-time dual-resolved characteristics can be utilized for dynamic information encryption and optical logic gate applications. This study is the first to disclose the relation between the characteristics of molecular packing and the resultant URTP of 2D metal hybrid perovskites, significantly advancing the development of next-generation URTP materials for versatile applications.

Two-dimensional metal halide perovskites and their heterostructures: from synthesis to applications

Abstract Size- and shape-dependent unique properties of the metal halide perovskite nanocrystals make them promising building blocks for constructing various electronic and optoelectronic devices. These unique properties together with their easy colloidal synthesis render them efficient nanoscale functional components for multiple applications ranging from light emission devices to energy conversion and storage devices. Recently, two-dimensional (2D) metal halide perovskites in the form of nanosheets (NSs) or nanoplatelets (NPls) are being intensively studied due to their promising 2D geometry which is more compatible with the conventional electronic and optoelectronic device structures where film-like components are usually employed. In particular, 2D perovskites exhibit unique thickness-dependent properties due to the strong quantum confinement effect, while enabling the bandgap tuning in a wide spectral range. In this review the synthesis procedures of 2D perovskite nanostructures will be summarized, while the application-related properties together with the corresponding applications will be extensively discussed. In addition, perovskite nanocrystals/2D material heterostructures will be reviewed in detail. Finally, the wide application range of the 2D perovskite-based structures developed to date, including pure perovskites and their heterostructures, will be presented while the improved synergetic properties of the multifunctional materials will be discussed in a comprehensive way.

Colossal barocaloric effects with ultralow hysteresis in two-dimensional metal–halide perovskites

Pressure-induced thermal changes in solids—barocaloric effects—can be used to drive cooling cycles that offer a promising alternative to traditional vapor-compression technologies. Efficient barocaloric cooling requires materials that undergo reversible phase transitions with large entropy changes, high sensitivity to hydrostatic pressure, and minimal hysteresis, the combination of which has been challenging to achieve in existing barocaloric materials. Here, we report a new mechanism for achieving colossal barocaloric effects that leverages the large volume and conformational entropy changes of hydrocarbon order–disorder transitions within the organic bilayers of select two-dimensional metal–halide perovskites. Significantly, we show how the confined nature of these order–disorder phase transitions and the synthetic tunability of layered perovskites can be leveraged to reduce phase transition hysteresis through careful control over the inorganic–organic interface. The combination of ultralow hysteresis and high pressure sensitivity leads to colossal reversible isothermal entropy changes (>200 J kg−1 K−1) at record-low pressures (<300 bar).

Sodium Incorporation for Enhanced Performance of Two-Dimensional Sn-Based Perovskite Transistors.

Two-dimensional metal halide perovskites (2D MHPs) are promising candidates for transistor channel materials because of their high mobility in the lateral direction; however, Sn-based 2D MHPs exhibit poor film quality and oxidation stability. Here, we report a simple method to improve the performance and stability of 2D MHP transistors by incorporating sodium iodide (NaI) additives. By adding 1 vol % NaI (Na1), the transistors with phenethylammonium tin iodide (PEA2SnI4) exhibited reduced dual-sweep hysteresis, robust bias stability, and larger hole mobility (2.13 cm2 V-1 s-1) than that of a pristine device (0.39 cm2 V-1 s-1). Improvements in the film quality, such as increased grain size, crystallinity, and better film coverage, were observed in the PEA2SnI4:NaI film. In addition, NaI effectively passivated the iodine vacancies at the grain boundaries, thereby suppressing the defects.

On the optical anisotropy in 2D metal-halide perovskites.

Two-dimensional metal-halide perovskites (MHPs) are versatile solution-processed organic/inorganic quantum wells where the structural anisotropy creates profound anisotropy in their electronic and excitonic properties and associated optical constants. We here employ a wholistic framework, based on semiempirical modeling (k·p/effective mass theory calculations) informed by hybrid density functional theory (DFT) and multimodal spectroscopic ellipsometry on (C6H5(CH2)2NH3)2PbI4 films and crystals, that allows us to link the observed optical properties and anisotropy precisely to the underlying physical parameters that shape the electronic structure of a layered MHP. We find substantial frequency-dependent anisotropy in the optical constants and close correspondence between experiment and theory, demonstrating a high degree of in-plane alignment of the two-dimensional planes in both spin-coated thin films and cleaved single crystals made in this study. Hybrid DFT results elucidate the degree to which organic and inorganic frontier orbitals contribute to optical transitions polarized along a particular axis. The combined experimental and theoretical approach enables us to estimate the fundamental electronic bandgap of 2.65-2.68 eV in this prototypical 2D perovskite and to determine the spin-orbit coupling (ΔSO = 1.20 eV) and effective crystal field (δ = -1.36 eV) which break the degeneracy of the frontier conduction band states and determine the exciton fine structure. The methods and results described here afford a better understanding of the connection between structure and induced optical anisotropy in quantum-confined MHPs, an important structure-property relationship for optoelectronic applications and devices.

Room Temperature Fabrication of Stable, Strongly Luminescent Dion-Jacobson Tin Bromide Perovskite Microcrystals Achieved through Use of Primary Alcohols.

Lead-free two-dimensional metal halide perovskites have recently emerged as promising light-emitting materials due to their improved stability and attractive optical properties. Herein, a facile room temperature wet milling method has been developed to make Dion–Jacobson (DJ) phase ODASnBr4 perovskite microcrystals, whose crystallization was accomplished via the aid of introduced primary alcohols: ethanol, butanol, pentanol, and hexanol. Due to the strong intermolecular hydrogen bonding, the use of ethanol promoted the formation of non-doped ODASnBr4 microcrystals, with an emission peaked at 599 nm and a high photoluminescence quantum yield (PL QY) of 81%. By introducing other primary alcohols with weaker intermolecular hydrogen bonding such as butanol, pentanol, and hexanol, [SnBr6]4− octahedral slabs of the DJ perovskite microcrystals experienced various degrees of expansion while forming O–H…Br hydrogen bonds. This resulted in the emission spectra of these alcohol-doped microcrystals to be adjusted in the range from 572 to 601 nm, while keeping the PL QY high, at around 89%. Our synthetic strategy provides a viable pathway towards strongly emitting lead-free DJ perovskite microcrystals with an improved stability.

Postsynthetic Crystalline Transformation in Two-Dimensional Perovskites via Organothiol-Based Chemistry

The first postsynthetic solution-based crystal transformation of two-dimensional metal halide perovskites (2D MHPs) through organothiol-based reactions is reported. It is well-established that the ...

Photoinduced Dynamics of Charge Carriers in Metal Halide Perovskites from an Atomistic Perspective.

Perovskite solar cells have attracted intense attention over the past decade because of their low cost, abundant raw materials, and rapidly growing power conversion efficiency (PCE). However, nonradiative charge carrier losses still constitute a major factor limiting the PCE to well below the Shockley-Queisser limit. This Perspective summarizes recent atomistic quantum dynamics studies on the photoinduced excited-state processes in metal halide perovskites (MHPs), including both hybrid organic-inorganic and all-inorganic MHPs and three- and two-dimensional MHPs. The simulations, performed using a combination of time-domain ab initio density functional theory and nonadiabatic molecular dynamics, allow emphasis on various intrinsic and extrinsic features, such as components, structure, dimensionality and interface engineering, control and exposure to various environmental factors, defects, surfaces, and their passivation. The detailed atomistic simulations advance our understanding of electron-vibrational dynamics in MHPs and provide valuable guidelines for enhancing the performance of perovskite solar cells.

Self-trapping effect on the excitonic and polaronic properties of a single-layer 2D metal-halide perovskite

Two-dimensional metal-halide perovskites (2DMHPs) have attracted tremendous interest due to their promising applications in the light-harvesting and light-emitting diodes. Recently, intensive experiment observations suggested the lattice of 2DMHPs should be very soft, such that photoexcitations would interact to the surrounding lattice distortions through the electron-lattice (e-l) couplings and led to the formation of self-trapped exciton (STE). However, the detailed formation mechanism has never been clearly clarified from the theoretical point of view. In this theoretical study, we build an effective tight-binding model for a single-layer 2DMHP (S2DMHP) with the e-l coupling considered as the Holstein type. This model successfully describes the ground-state optoelectronic properties and generates the primary non-linear elementary excitations which have been observed in a series of experiments. Our calculation reveals that the exciton state of a S2DMHP will exhibit significant polaronic characters. Depending on the e-l coupling strength and the level-occupancy configuration of the electron-hole pairs, such polaronic states could behave as either large polarons or small polarons. Large polarons range over multiple unit cells and induce the local deformation of the surrounding crystalline structure. Contrarily, small polarons are strongly bound and being trapped within the single octahedras. The existence of large and small polarons respectively explain the relative lower charge mobilities and the peculiar broadened white-light emissions in some selected S2DMHPs. The present work highlights the essential role of e-l couplings in determination of the excitonic properties of S2DMHPs and provides a theoretical foundation to deeply understand the optoelectronic behavior of S2DMHPs-based semiconductor devices.

Extrinsic nature of the broad photoluminescence in lead iodide-based Ruddlesden\u2013Popper perovskites

Two-dimensional metal halide perovskites of Ruddlesden–Popper type have recently moved into the centre of attention of perovskite research due to their potential for light generation and for stabilisation of their 3D counterparts. It has become widespread in the field to attribute broad luminescence with a large Stokes shift to self-trapped excitons, forming due to strong carrier–phonon interactions in these compounds. Contrarily, by investigating the behaviour of two types of lead-iodide based single crystals, we here highlight the extrinsic origin of their broad band emission. As shown by below-gap excitation, in-gap states in the crystal bulk are responsible for the broad emission. With this insight, we further the understanding of the emission properties of low-dimensional perovskites and question the generality of the attribution of broad band emission in metal halide perovskite and related compounds to self-trapped excitons.

Origin of vertical orientation in two-dimensional metal halide perovskites and its effect on photovoltaic performance

Thin films based on two-dimensional metal halide perovskites have achieved exceptional performance and stability in numerous optoelectronic device applications. Simple solution processing of the 2D perovskite provides opportunities for manufacturing devices at drastically lower cost compared to current commercial technologies. A key to high device performance is to align the 2D perovskite layers, during the solution processing, vertical to the electrodes to achieve efficient charge transport. However, it is yet to be understood how the counter-intuitive vertical orientations of 2D perovskite layers on substrates can be obtained. Here we report a formation mechanism of such vertically orientated 2D perovskite in which the nucleation and growth arise from the liquid–air interface. As a consequence, choice of substrates can be liberal from polymers to metal oxides depending on targeted application. We also demonstrate control over the degree of preferential orientation of the 2D perovskite layers and its drastic impact on device performance.

Stable biexcitons in two-dimensional metal-halide perovskites with strong dynamic lattice disorder

With strongly bound and stable excitons at room temperature, single-layer, two-dimensional organic-inorganic hybrid perovskites are viable semiconductors for light-emitting quantum optoelectronics applications. In such a technological context, it is imperative to comprehensively explore all the factors --- chemical, electronic and structural --- that govern strong multi-exciton correlations. Here, by means of two-dimensional coherent spectroscopy, we examine excitonic many-body effects in pure, single-layer (PEA)$_2$PbI$_4$ (PEA = phenylethylammonium). We determine the binding energy of biexcitons --- correlated two-electron, two-hole quasiparticles --- to be $44 \pm 5$\,meV at room temperature. The extraordinarily high values are similar to those reported in other strongly excitonic two-dimensional materials such as transition-metal dichalchogenides. Importantly, we show that this binding energy increases by $\sim25$\% upon cooling to 5\,K. Our work highlights the importance of multi-exciton correlations in this class of technologically promising, solution-processable materials, in spite of the strong effects of lattice fluctuations and dynamic disorder.