Two-dimensional Culture Systems Research Articles

Resveralogues protect HepG2 cells against cellular senescence induced by hepatotoxic metabolites

Progressive liver disease and dysfunction cause toxic metabolites including ammonia and unconjugated bilirubin to accumulate in plasma. As the population ages alternatives to liver transplantation become increasingly important. One approach for use as a bridge to transplant or recovery is the use of bioartificial liver systems (BALS) containing primary or immortalised hepatocytes as ex-vivo replacements or supports for endogenous liver function. However, exposure to the hepatotoxic metabolites present in plasma causes the rapid failure of these cells to carry out their primary metabolic functions despite remaining viable. Hypothesizing that this loss of core hepatocyte phenotypes was caused by cell senescence we exposed HepG2 cell populations, grown in both standard two-dimensional tissue culture systems and in three dimensional cultures on novel alginate modified HEMA-MBA cryogels, to physiologically reflective concentrations of hepatotoxic metabolites and cytokines. HepG2 cells are forced into senescence by the toxic metabolites in under six hours (as measured by loss of thymidine analog incorporation or detectable Ki67 staining) which is associated with a ten to twenty-fold reduction in the capacity of the cultures to synthesise albumin or urea. This state of senescence induced by liver toxins (SILT) can be prevented by preincubation with either 2–5 µM resveratrol, its major in vivo metabolite dihydroresveratrol or a series of novel resveralogues with differential capacities to scavenge radicals and activate SIRT1 (including V29 which does not interact with the protein). SILT appears to be a previously unrecognised barrier to the development of BALS which can now be overcome using small molecules that are safe for human use at concentrations readily achievable in vivo.

In vitro proliferation and differentiation of mouse spermatogonial stem cells in decellularized human placenta matrix.

Utilizing natural scaffold production derived from extracellular matrix components presents a promising strategy for advancing in vitro spermatogenesis. In this study, we employed decellularized human placental tissue as a scaffold, upon which neonatal mouse spermatogonial cells (SCs) were cultured three-dimensional (3D) configuration. To assess cellular proliferation, we examined the expression of key markers (Id4 and Gfrα1) at both 1 and 14 days into the culture. Our quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis revealed a notable increase in Gfrα1 gene expression, with the 3D culture group exhibiting the highest levels. Furthermore, the relative frequency of Gfrα1-positive cells significantly rose from 38.1% in isolated SCs to 46.13% and 76.93% in the two-dimensional (2D) and 3D culture systems, respectively. Moving forward to days 14 and 35 of the culture period, we evaluated the expression of differentiating markers (Sycp3, acrosin, and Protamine 1). Sycp3 and Prm1 gene expression levels were upregulated in both 2D and 3D cultures, with the 3D group displaying the highest expression. Additionally, acrosin gene expression increased notably within the 3D culture. Notably, at the 35-day mark, the percentage of Prm1-positive cells in the 3D group (36.4%) significantly surpassed that in the 2D group (10.96%). This study suggests that the utilization of placental scaffolds holds significant promise as a bio-scaffold for enhancing mouse in vitro spermatogenesis.

Current strategies using 3D organoids to establish in vitro maternal-embryonic interaction.

The creation of robust maternal-embryonic interactions and implantation models is important for comprehending the early stages of embryonic development and reproductive disorders. Traditional two-dimensional (2D) cell culture systems often fail to accurately mimic the highly complex in vivo conditions. The employment of three-dimensional (3D) organoids has emerged as a promising strategy to overcome these limitations in recent years. The advancements in the field of organoid technology have opened new avenues for studying the physiology and diseases affecting female reproductive tract. This review summarizes the current strategies and advancements in the field of 3D organoids to establish maternal-embryonic interaction and implantation models for use in research and personalized medicine in assisted reproductive technology. The concepts of endometrial organoids, menstrual blood flow organoids, placental trophoblast organoids, stem cell-derived blastoids, and in vitro-generated embryo models are discussed in detail. We show the incorportaion of organoid systems and microfluidic technology to enhance tissue performance and precise management of the cellular surroundings. This review provides insights into the future direction of modeling maternal-embryonic interaction research and its combination with other powerful technologies to interfere with this dialogue either by promoting or hindering it for improving fertility or methods for contraception, respectively. The merging of organoid systems with microfluidics facilitates the creation of sophisticated and functional organoid models, enhancing insights into organ development, disease mechanisms, and personalized medical investigations.

Hydrogel/microcarrier cell scaffolds for rapid expansion of satellite cells from large yellow croakers: Differential analysis between 2D and 3D cell culture

Cell culture meat is based on the scaled-up expansion of seed cells. The biological differences between seed cells from large yellow croakers in the two-dimensional (2D) and three-dimensional (3D) culture systems have not been explored. Here, satellite cells (SCs) from large yellow croakers (Larimichthys crocea) were grown on cell climbing slices, hydrogels, and microcarriers for five days to analyze the biological differences of SCs on different cell scaffolds. The results exhibited that SCs had different cell morphologies in 2D and 3D cultures. Cell adhesion receptors (Itgb1andsdc4) and adhesion spot markervclof the 3D cultures were markedly expressed. Furthermore, myogenic decision markers (Pax7andmyod) were significantly enhanced. However, the expression of myogenic differentiation marker (desmin) was significantly increased in the microcarrier group. Combined with the transcriptome data, this suggests that cell adhesion of SCs in 3D culture was related to the integrin signaling pathway. In contrast, the slight spontaneous differentiation of SCs on microcarriers was associated with rapid cell proliferation. This study is the first to report the biological differences between SCs in 2D and 3D cultures, providing new perspectives for the rapid expansion of cell culture meat-seeded cells and the development of customized scaffolds.

Generation of a Bovine Primary Enteroid-Derived Two-Dimensional Monolayer Culture System for Applications in Translational Biomedical Research.

Organoid cell culture systems can recapitulate the complexity observed in tissues, making them useful in studying host-pathogen interactions, evaluating drug efficacy and toxicity, and tissue bioengineering. However, applying these models for the described reasons may be limited because of the three-dimensional (3D) nature of these models. For example, using 3D enteroid culture systems to study digestive diseases is challenging due to the inaccessibility of the intestinal lumen and its secreted substances. Indeed, stimulation of 3D organoids with pathogens requires either luminal microinjection, mechanical disruption of the 3D structure, or generation of apical-out enteroids. Moreover, these organoids cannot be co-cultured with immune and stromal cells, limiting in-depth mechanistic analysis into pathophysiological dynamics. To circumvent this, we optimized a bovine primary cell two-dimensional (2D) enteroid-derived monolayer culture system, allowing co-culture with other relevant cell types. Ileal crypts isolated from healthy adult cattle were cultured to generate 3D organoids that were cryopreserved for future use. A 2D monolayer was created using revived 3D enteroids that were passaged and disrupted to yield single cells, which were seeded on basement membrane extract-coated transwell cell culture inserts, thereby exposing their apical surface. The intestinal monolayer polarity, cellular differentiation, and barrier function were characterized using immunofluorescence microscopy and measuring transepithelial electrical resistance. Stimulation of the apical surface of the monolayer revealed the expected functionality of the monolayer, as demonstrated by cytokine secretion from both apical and basal compartments. The described 2D enteroid-derived monolayer model holds great promise in investigating host-pathogen interactions and intestinal physiology, drug development, and regenerative medicine.

Simple and Rapid Method of Microwell Array Fabrication for Drug Testing on 3D Cancer Spheroids.

Three-dimensional (3D) cell culture systems are becoming increasingly popular due to their ability to mimic the complex process of angiogenesis in cancer, providing more accurate and physiologically relevant data than traditional two-dimensional (2D) cell culture systems. Microwell systems are particularly useful in this context as they provide a microenvironment that more closely resembles the in vivo environment than traditional microwells. Poly(ethylene glycol) (PEG) microwells are particularly advantageous due to their bio-inertness and the ability to tailor their material characteristics depending on the PEG molecular weight. Although there are several methods available for microwell fabrication, most of them are time-consuming and expensive. The current study utilizes a low-cost laser etching technique on poly(methyl methacrylate) materials followed by molding with PDMS to produce microwells. The optimal conditions for making concave microwells are an engraving parameter speed of 600 mm/s, power of 20%, and a design diameter of the microwell of 0.4 mm. The artificial tumor achieved its full size after 7 days of cell growth in a microwell system, and the cells developed drugs through a live/dead assay test. The results of the drug testing revealed that the IC50 value of zerumbone-loaded liposomes in HepG2 was 4.53 pM, which is greater than the IC50 value of zerumbone. The HepG2 cancer sphere's 3D platform for medication testing revealed that zerumbone-loaded liposomes were very effective at high doses. These findings generally imply that zerumbone-loaded liposomes have the capacity to target the liver and maintain medication delivery.

Abstract 6769: Applications of a novel fibrous extracellular matrix for advanced in vitro cancer models

Abstract Compared to traditional in vitro two-dimensional (2D) planar cell culture system, three-dimensional (3D) mammalian cell culture can better recapitulate physiological environments and the complexity of natural tissues, hence they are crucial in modern biomedical research. Extracellular matrices (ECM) play a key role in in vitro mammalian cell culture systems. The role of the ECM on in vitro 3D cell culture are: 1) to simulate an in vivo-like physiological environment, 2) support cell-cell and cell-ECM interactions, 3) promote cell adhesion, migration, and communication, 4) aid in tissue development, morphogenesis, differentiation, and functioning. Although basal membrane extracts (BME) are the most popular type of ECM supporting 3D modeling in vitro, they often have significant limitations including limited long-term stability, significant batch to batch heterogeneity, restricted cell movement, and relatively high cost for culturing many cancer cell lines. In this investigation, we employ a novel micro-fibrous scaffold that closely mimics natural ECM, providing porous and interconnected networks for 3D culturing of hepatic cells, lung cancer, breast cancer, pancreatic cancer. As revealed by optical and scanning electron microscopy, the scaffold promotes significant cell-to-cell and cell-to-matrix interactions. Moreover, we observed improved cell growth in 3D culture over longer periods than 2D culture systems for all cell types examined. We also evaluated the anticancer efficiency of different drugs including Lapatinib, Cisplatin, Docetaxel, Doxorubicin and observed that 2D cultured cells were more sensitive to drugs treatment in comparison to 3D. Furthermore, ECM was observed to support 3D growth and structure formation with cell pools of primary cells achieved from disassociated human tumors. Tumor organoids were able to form within seven days and ready for anticancer screening within 14 days. We achieved an 80% success rate in developing breast cancer organoids from patient tissues. Additionally, tissue granules were also able to be cultured under the same condition, which allowed us to investigate the invasion of cancer cells into tissue. The primary cells from human tumors formed cell clusters resembling the original tumor tissue's structure. In conclusion, the novel micro-fibrous scaffold, closely mimicking natural extracellular matrixes, promotes significant cell-to-cell and cell-to-matrix interactions, while also facilitating cell growth over extended periods providing a more physiologically relevant platform for evaluating drug responses for various cancer cell types, further showing the importance of 3D culture systems in cancer research. Citation Format: Navneet Kaur, Dazhi Yang, Jamel Ali. Applications of a novel fibrous extracellular matrix for advanced in vitro cancer models [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 6769.

Cost-effective 3D lung tissue spheroid as a model for SARS-CoV-2 infection and drug screening.

The SARS-CoV-2 pandemic has spurred an unparalleled scientific endeavor to elucidate the virus' structure, infection mechanisms, and pathogenesis. Two-dimensional culture systems have been instrumental in shedding light on numerous aspects of COVID-19. However, these invitro systems lack the physiological complexity to comprehend the infection process and explore treatment options. Three-dimensional (3D) models have been proposed to fill the gap between 2D cultures and invivo studies. Specifically, spheroids, composed of lung cell types, have been suggested for studying SARS-CoV-2 infection and serving as a drug screening platform. 3D lung spheroids were prepared by coculturing human alveolar or bronchial epithelial cells with human lung stromal cells. The morphology, size, and ultrastructure of spheroids before and after SARS-CoV-2 infection were analyzed using optical and electron microscopy. Immunohistochemistry was used to detect spike protein and, thus, the virus presence in the spheroids. Multiplex analysis elucidated the cytokine release after virus infection. The spheroids were stable and kept their size and morphology after SARS-CoV-2 infection despite the presence of multivesicular bodies, endoplasmic reticulum rearrangement, tubular compartment-enclosed vesicles, and the accumulation of viral particles. The spheroid responded to the infection releasing IL-6 and IL-8 cytokines. This study demonstrates that coculture spheroids of epithelial and stromal cells can serve as a cost-effective infection model for the SARS-CoV-2 virus. We suggest using this 3D spheroid as a drug screening platform to explore new treatments related to the cytokines released during virus infection, especially for long COVID treatment.

Advantages of Using 3D Spheroid Culture Systems in Toxicological and Pharmacological Assessment for Osteogenesis Research.

Bone differentiation is crucial for skeletal development and maintenance. Its dysfunction can cause various pathological conditions such as rickets, osteoporosis, osteogenesis imperfecta, or Paget's disease. Although traditional two-dimensional cell culture systems have contributed significantly to our understanding of bone biology, they fail to replicate the intricate biotic environment of bone tissue. Three-dimensional (3D) spheroid cell cultures have gained widespread popularity for addressing bone defects. This review highlights the advantages of employing 3D culture systems to investigate bone differentiation. It highlights their capacity to mimic the complex in vivo environment and crucial cellular interactions pivotal to bone homeostasis. The exploration of 3D culture models in bone research offers enhanced physiological relevance, improved predictive capabilities, and reduced reliance on animal models, which have contributed to the advancement of safer and more effective strategies for drug development. Studies have highlighted the transformative potential of 3D culture systems for expanding our understanding of bone biology and developing targeted therapeutic interventions for bone-related disorders. This review explores how 3D culture systems have demonstrated promise in unraveling the intricate mechanisms governing bone homeostasis and responses to pharmacological agents.

The Effect of Harmine on Dental Pulp Stem Cells Differentiation Into Neural Cells in Two-Dimensional and Three-Dimensional Cell Cultures

Background: As the repair capacity of the nervous system is low, stem cell therapy is a trend for replacement therapy. Dental pulp stem cells (DPSCs) have the potential to differentiate into many tissues, such as neurons. Harmine (7-methoxy-1methyl-9H-pyrido[3,4-b] indole) is an alkaloidal component of medicinal plants with a long history in traditional medicine. Alginate is a biocompatible hydrogel widely used as a biomaterial base in various scaffolds. Objectives: This study investigated whether harmine and encapsulation of cells in alginate hydrogel could improve DPSCs differentiation into neural cells. Methods: DPSCs were cultured under standard stem cell culture conditions, then encapsulated in alginate hydrogel, and treated with differentiation medium with and without harmine. After 14 days, cell proliferation and differentiation were assessed by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay, real-time polymerase chain reaction (RT-PCR), and flow cytometry. Results: Harmine (5 and 10 μM) significantly increased the proliferation and viability of DPSCs compared to the control group in both two-dimensional and three-dimensional culture systems (P < 0.05). The expression levels of three neural cell markers (nestin, microtubule-associated protein [MAP-2], and β-tubulin III) in DPSCs-derived neural cells cultured in two-dimensional and three-dimensional culture systems were significantly increased in harmine-treated two-dimensional and three-dimensional culture systems compared to the control group (P < 0.05). Conclusions: Either harmine or alginate hydrogel had an accelerating effect on DPSCs differentiation into neural cells. Harmine also increased the proliferation of the cells.

Investigation of impacts of decellularized heart extracellular matrix and VEGF on cardiomyogenic differentiation of mesenchymal stem cell through Notch/Hedgehog signaling pathways

ObjectiveDecellularization is the process to obtain natural scaffolds with tissue integrity and extracellular matrix components, and recellularization is used to produce tissue-like constructs with specific cell types. In this study, rat bone marrow-derived mesenchymal stem cells (rBM-MSCs) were cultured on decellularized heart extracellular matrix. These cells were then induced to differentiate into cardiomyogenic cells under the stimulatory effect of vascular endothelial growth factor (VEGF) and other chemicals. This study aimed to investigate the effect of the cardiac extracellular matrix and VEGF on cardiomyogenic differentiation in the context of the Notch and Hedgehog signaling pathways. MethodsHeart samples extracted from rats were decellularized by serial application of detergent to remove cells from the tissue, and then recellularized with rBM-MSCs. The recellularized tissue matrices were then analyzed for cardiomyogenesis. Cardiomyogenic differentiation was performed on decellularized heart extracellular matrix (ECM; three-dimensional scaffolds) and culture plates (two-dimensional cell culture system) for 28 days to understand the effects of the heart extracellular matrix. In addition, differentiation was induced with and without the stimulatory effect of VEGF to understand the effect of VEGF on cardiomyogenic differentiation of rBM-MSCs. ResultsImmunofluorescence staining showed that decellularization of the heart was performed effectively and successfully. After decellularization process, the heart extracellular matrix was completely free of cells. It was observed that rBM-MSCs transplanted onto the heart extracellular matrix remained viable and proliferated for 21 days after recellularization. The rBM-MSCs promoted cardiomyogenic differentiation in the conventional differentiation medium but were inversely affected by both VEGF and heart extracellular matrix proteins. Lower expression of connexin43 and cardiac troponin I genes was observed in cells induced by either matrix proteins or VEGF, compared to cells differentiated by chemical agents alone. ConclusionIn this study, we investigated the effect of decellularized heart extracellular matrix and VEGF on cardiomyogenic differentiation of rBM-MSCs. On the decellularized cardiac extracellular matrix, rBM-MSCs maintained their viability by adhering to the matrix and proliferating further. The adhesion of the cells to the matrix also produced a physical stimulus that led to the formation of histological structures resembling myocardial layers. Chemical stimulation of the decellularized heart extracellular matrix and cardiomyogenic differentiation supplements resulted in increased expression of cardiomyogenic biomarkers through modulation of the Notch and Hedgehog signaling pathways.

Innovative three-dimensional models for understanding mechanisms underlying lung diseases: powerful tools for translational research.

Chronic lung diseases result from alteration and/or destruction of lung tissue, inevitably causing decreased breathing capacity and quality of life for patients. While animal models have paved the way for our understanding of pathobiology and the development of therapeutic strategies for disease management, their translational capacity is limited. There is, therefore, a well-recognised need for innovative in vitro models to reflect chronic lung diseases, which will facilitate mechanism investigation and the advancement of new treatment strategies. In the last decades, lungs have been modelled in healthy and diseased conditions using precision-cut lung slices, organoids, extracellular matrix-derived hydrogels and lung-on-chip systems. These three-dimensional models together provide a wide spectrum of applicability and mimicry of the lung microenvironment. While each system has its own limitations, their advantages over traditional two-dimensional culture systems, or even over animal models, increases the value of in vitro models. Generating new and advanced models with increased translational capacity will not only benefit our understanding of the pathobiology of lung diseases but should also shorten the timelines required for discovery and generation of new therapeutics. This article summarises and provides an outline of the European Respiratory Society research seminar "Innovative 3D models for understanding mechanisms underlying lung diseases: powerful tools for translational research", held in Lisbon, Portugal, in April 2022. Current in vitro models developed for recapitulating healthy and diseased lungs are outlined and discussed with respect to the challenges associated with them, efforts to develop best practices for model generation, characterisation and utilisation of models and state-of-the-art translational potential.

POLYCAPROLACTONE FIBER-BASED BOVINE DENDRITIC CELL DEVELOPMENT AND THREE- DIMENSIONAL CULTURE IN VITRO

Two-dimensional (2D) cell culture systems are normally used for in vitro experiments. These systems have some drawbacks which affect results of in vitro experiments because cultured cells have different morphology and physiological properties comparing to in vivo models. Therefore, there are current technique to develop three-dimensional (3D) cell culture systems which are closer to the environment in real tissues. In our study, we used polycaprolactone fiber scaffold for culture of bovine monocytes to develop dendritic cells (DCs) from those cells. Cultured monocytes in the polycaprolactone nanofiber scaffold differentiated to DCs. The differentiated DCs showed a 3D structure in the scaffold. These results suggest that this method is suitable for the development of DCs in a manner of three-dimension. These method is perspective for bovine cell culture and has advantages compare to conventional 2D culture systems.

Spinal Cord Organoids to Study Motor Neuron Development and Disease.

Motor neuron diseases (MNDs) are a heterogeneous group of disorders that affect the cranial and/or spinal motor neurons (spMNs), spinal sensory neurons and the muscular system. Although they have been investigated for decades, we still lack a comprehensive understanding of the underlying molecular mechanisms; and therefore, efficacious therapies are scarce. Model organisms and relatively simple two-dimensional cell culture systems have been instrumental in our current knowledge of neuromuscular disease pathology; however, in the recent years, human 3D in vitro models have transformed the disease-modeling landscape. While cerebral organoids have been pursued the most, interest in spinal cord organoids (SCOs) is now also increasing. Pluripotent stem cell (PSC)-based protocols to generate SpC-like structures, sometimes including the adjacent mesoderm and derived skeletal muscle, are constantly being refined and applied to study early human neuromuscular development and disease. In this review, we outline the evolution of human PSC-derived models for generating spMN and recapitulating SpC development. We also discuss how these models have been applied to exploring the basis of human neurodevelopmental and neurodegenerative diseases. Finally, we provide an overview of the main challenges to overcome in order to generate more physiologically relevant human SpC models and propose some exciting new perspectives.

A concise in vitro model for evaluating interactions between macrophage and skeletal muscle cells during muscle regeneration.

Skeletal muscle has a highly regenerative capacity, but the detailed process is not fully understood. Several in vitro skeletal muscle regeneration models have been developed to elucidate this, all of which rely on specialized culture conditions that limit the accessibility and their application to many general experiments. Here, we established a concise in vitro skeletal muscle regeneration model using mouse primary cells. This model allows evaluation of skeletal muscle regeneration in two-dimensional culture system similar to a typical cell culture, showing a macrophage-dependent regenerative capacity, which is an important process in skeletal muscle regeneration. Based on the concept that this model could assess the contribution of macrophages of various phenotypes to skeletal muscle regeneration, we evaluated the effect of endotoxin pre-stimulation for inducing various changes in gene expression on macrophages and found that the contribution to skeletal muscle regeneration was significantly reduced. The gene expression patterns differed from those of naive macrophages, especially immediately after skeletal muscle injury, suggesting that the difference in responsiveness contributed to the difference in regenerative efficiency. Our findings provide a concise in vitro model that enables the evaluation of the contribution of individual cell types, such as macrophages and muscle stem cells, on skeletal muscle regeneration.

IPSC-derived three-dimensional brain organoid models and neurotropic viral infections.

Progress in stem cell research has revolutionized the medical field for more than two decades. More recently, the discovery of induced pluripotent stem cells (iPSCs) has allowed for the development of advanced disease modeling and tissue engineering platforms. iPSCs are generated from adult somatic cells by reprogramming them into an embryonic-like state via the expression of transcription factors required for establishing pluripotency. In the context of the central nervous system (CNS), iPSCs have the potential to differentiate into a wide variety of brain cell types including neurons, astrocytes, microglial cells, endothelial cells, and oligodendrocytes. iPSCs can be used to generate brain organoids by using a constructive approachin three-dimensional (3D) culture in vitro. Recent advances in 3D brain organoid modeling have provided access to a better understanding of cell-to-cell interactions in disease progression, particularly with neurotropic viral infections. Neurotropic viral infections have been difficult to study in two-dimensional culture systems in vitro due to the lack of a multicellular composition of CNS cell networks. In recent years, 3D brain organoids have been preferred for modeling neurotropic viral diseases and have provided invaluable information for better understanding the molecular regulation of viral infection and cellular responses. Here we provide a comprehensive review of the literature on recent advances in iPSC-derived 3D brain organoid culturing and their utilization in modeling major neurotropic viral infections including HIV-1, HSV-1, JCV, ZIKV, CMV, and SARS-CoV2.

Recreating the extracellular matrix: novel 3D cell culture platforms in cancer research.

Cancer initiation and progression heavily rely on microenvironmental cues derived from various components of the niche including the extracellular matrix (ECM). ECM is a complex macromolecular network that governs cell functionality. Although the two-dimensional (2D) cell culture systems provide useful information at the molecular level and preclinical testing, they could not accurately represent the in vivo matrix microenvironmental architecture. Hence, it is no surprise that researchers in the last decade have focussed their efforts on establishing novel advanced in vitro culture models that mimic tumour and tissue-specific niches and interactions. These numerous three-dimensional (3D) culture systems that are now widely available, as well as those still under development, grant researchers with new, improved tools to study cancer progression and to explore innovative therapeutic options. Herein, we report on the emerging methods and cutting-edge technologies in 3D cell culture platforms and discuss their potential use in unveiling tumour microenvironmental cues, drug screening and personalized treatment.

Recent Advances in Generation of In Vitro Cardiac Organoids.

Cardiac organoids are in vitro self-organizing and three-dimensional structures composed of multiple cardiac cells (i.e., cardiomyocytes, endothelial cells, cardiac fibroblasts, etc.) with or without biological scaffolds. Since cardiac organoids recapitulate structural and functional characteristics of the native heart to a higher degree compared to the conventional two-dimensional culture systems, their applications, in combination with pluripotent stem cell technologies, are being widely expanded for the investigation of cardiogenesis, cardiac disease modeling, drug screening and development, and regenerative medicine. In this mini-review, recent advances in cardiac organoid technologies are summarized in chronological order, with a focus on the methodological points for each organoid formation. Further, the current limitations and the future perspectives in these promising systems are also discussed.

3D cell culture model: From ground experiment to microgravity study.

Microgravity has been shown to induce many changes in cell growth and differentiation due to offloading the gravitational strain normally exerted on cells. Although many studies have used two-dimensional (2D) cell culture systems to investigate the effects of microgravity on cell growth, three-dimensional (3D) culture scaffolds can offer more direct indications of the modified cell response to microgravity-related dysregulations compared to 2D culture methods. Thus, knowledge of 3D cell culture is essential for better understanding the in vivo tissue function and physiological response under microgravity conditions. This review discusses the advances in 2D and 3D cell culture studies, particularly emphasizing the role of hydrogels, which can provide cells with a mimic in vivo environment to collect a more natural response. We also summarized recent studies about cell growth and differentiation under real microgravity or simulated microgravity conditions using ground-based equipment. Finally, we anticipate that hydrogel-based 3D culture models will play an essential role in constructing organoids, discovering the causes of microgravity-dependent molecular and cellular changes, improving space tissue regeneration, and developing innovative therapeutic strategies. Future research into the 3D culture in microgravity conditions could lead to valuable therapeutic applications in health and pharmaceuticals.

Biomanufacturing Recombinantly Expressed Cripto-1 Protein in Anchorage-Dependent Mammalian Cells Growing in Suspension Bioreactors within a Three-Dimensional Hydrogel Microcarrier.

Biotherapeutic soluble proteins that are recombinantly expressed in mammalian cells can pose a challenge when biomanufacturing in three-dimensional (3D) suspension culture systems. Herein, we tested a 3D hydrogel microcarrier for a suspension culture of HEK293 cells overexpressing recombinant Cripto-1 protein. Cripto-1 is an extracellular protein that is involved in developmental processes and has recently been reported to have therapeutic effects in alleviating muscle injury and diseases by regulating muscle regeneration through satellite cell progression toward the myogenic lineage. Cripto-overexpressing HEK293 cell lines were cultured in microcarriers made from poly (ethylene glycol)-fibrinogen (PF) hydrogels, which provided the 3D substrate for cell growth and protein production in stirred bioreactors. The PF microcarriers were designed with sufficient strength to resist hydrodynamic deterioration and biodegradation associated with suspension culture in stirred bioreactors for up to 21 days. The yield of purified Cripto-1 obtained using the 3D PF microcarriers was significantly higher than that obtained with a two-dimensional (2D) culture system. The bioactivity of the 3D-produced Cripto-1 was equivalent to commercially available Cripto-1 in terms of an ELISA binding assay, a muscle cell proliferation assay, and a myogenic differentiation assay. Taken together, these data indicate that 3D microcarriers made from PF can be combined with mammalian cell expression systems to improve the biomanufacturing of protein-based therapeutics for muscle injuries.