Turbidite Sequences Research Articles

Assessing the Contribution of Clastic Sedimentary Rocks to Geosite Potential and Geoscience Education: An Example of Coarse-grained Turbidite Sequences,

Assessing the Contribution of Clastic Sedimentary Rocks to Geosite Potential and Geoscience Education: An Example of Coarse-grained Turbidite Sequences,

Turbidite correlation for paleoseismology

Marine turbidite paleoseismology relies on the assumption of synchronous triggering of turbidity currents by earthquake shaking to infer rupture extent and recurrence. Such inference commonly depends on age dating and correlation of the physical stratigraphy of deposits carried by turbidity currents (i.e., turbidites) across great distances. Along the Cascadia subduction zone, which lies offshore the Pacific Northwest, USA, turbidite facies in core photographs, X-ray computed tomography images, and magnetic susceptibility (MS) data exhibit differences in character over relatively short distances, which implies that not all deposits can be correlated with confidence. Thus, subjective correlation based on expected similarity over great distances and weak age constraints does not independently support paleoseismic models. We present a new method for correlating turbidites along the Cascadia margin that can yield a more objective and repeatable stratigraphic framework to underpin earthquake recurrence. We use dynamic time warping to correlate MS logs and measure correlation coefficients of core pairs to evaluate correlation strength. We then compare these measures to a distribution of correlation coefficients of randomly generated turbidite sequences and find that only a small number of core pairs can be correlated more confidently than randomly stacked turbidites. This methodology promises a more robust correlation strategy for future stratigraphic studies.

Convergence and transpression along the paleo-Pacific margin of Australia during the Paleozoic: insights from the Pinnak Sandstone at Mallacoota, northeast Victoria

Underpinning almost every Paleozoic paleogeographic reconstruction and tectonic model of the Lachlan Orogen is the interpretation of the structural geology related to crustal collision and amalgamation. Bounding the eastern margin of the Lachlan Orogen is a north-trending corridor of Cambrian–Ordovician turbidites that in northeast Victoria are recognised as the Pinnak Sandstone or previously known as the Mallacoota Beds. This sequence contains an accretionary prism related early S* foliation, syn-sedimentary dykes, slump structures, early faults or décollements and early quartz veins. These indicate anisotropic compaction by fluid extraction in a shallow marine turbidite sequence that underwent localised deformation (D1), which can be attributed to the Benambran Orogeny (ca 450 Ma). There was a change in the rheological properties during the ensuing late Silurian D2 Bindian Orogeny (ca 420 Ma). This event produced north–south-trending upright, east-verging folds (F2) with a marked partitioning of strain between the different sedimentary units. Folds plunge south at ∼30°, are tight to isoclinal, with local collapsed hinges and limb thrusts. This D2 deformation along the paleo-Pacific margin involved dextral transpression and a southerly propagation of the deformation front. Superimposed on these structures is an east–west paleostress pattern and two episodes of faulting (D3 and D4). In the first, brittle strike-slip faults were accompanied by ductile folding related to east–west shortening during the Middle–Late Devonian Tabberabberan Orogeny (ca 385–370 Ma). These were accompanied by the emplacement of the Sandpatch Point Granite. The second episode (D4) of strike-slip faulting reactivated many of the earlier faults during further east–west shortening and was related to the Carboniferous Kanimblan Orogeny (ca 354–343 Ma). This is best seen close to the granite contact where the strong crystallised granite reinforced the contact metamorphosed greywacke sequence, inhibiting ductile deformation so that faults deformed in a brittle fashion.

Paleoproterozoic Rocks of the Belcher Islands, Nunavut: A Review of Their Remarkable Geology and Relevance to Inuit-led Conservation Efforts

The Paleoproterozoic Belcher Group (ca. 2.0 to 1.83 Ga) occurs on the remote Belcher Islands of Hudson Bay in Nunavut, Canada. It includes nearly nine kilometres of well-preserved siliciclastic and carbonate sedimentary rocks, deposited initially in a marginal to shallow marine setting representing one of the first true continental shelf environments on the proto-Canadian Shield. A wide variety of depositional facies exists within the Belcher Group, and it is particularly well known for its spectacular stromatolites in dolostone. In addition to these macroscopic features, two of its formations (Kasegalik and McLeary) contain intact microfossils of Eoentophysalis belcherensis, the oldest known occurrence of cyanobacteria in the geological record. The uppermost part of the Belcher Group contains sedimentary rocks of very different character that represent a younger foreland basin that developed in response to accretionary and collisional processes of the Trans-Hudson orogen. These younger formations (Omarolluk and Loaf) consist of a thick sequence of turbidites, overlain by arkose and other immature clastic sedimentary rocks. A defining characteristic of the Omarolluk Formation is the presence of calcareous concretions. The Omarolluk Formation shares attributes with “omars”, which are glacially transported clasts that occur both locally and further afield throughout parts of Canada and the northern United States and have helped characterize Pleistocene ice-flow trends across the continent. The Belcher Group also includes two formations dominated by spectacular mafic volcanic rocks. The earlier episode, represented by the Eskimo Formation, reflects eruption of largely subaerial volcanic flows interpreted to represent flood basalt associated with the rifting of Archean basement during the establishment of the continental shelf. A later volcanic episode (the Flaherty Formation) is dominated by submarine pillowed basalt flows and has been assigned to varied tectonic settings, including volcanic arcs related to subduction and oceanic plateaus related to mantle plume activity and renewed rifting along the continental margin. This later volcanism marks the transition from shelf to foreland basin. Mafic sills and related intrusions (Haig intrusions) occur in the middle and lower part of the Belcher Group. Thermal and chemical interactions between mafic magma and calcareous shale generated unusual rocks that are well known in Nunavut as high-quality artisanal carving stone. The Belcher Group also contains Superior-type iron formations that have attracted past exploration interest. The Belcher Group is a unique geological entity defined by its wide variety of rock types, its superb exposures, and its potential to illustrate many important geological processes in a formative time in Earth’s history. It is also a unique microfossil paleontological resource, and its deposition brackets a crucial and much-debated interval of Precambrian atmospheric and oceanic evolution. It represents an important scientific resource in the context of understanding such changes. This general review paper highlights its most important features, discusses its potential for future research and contributes to wider discussions about its possible future role as a protected area within Nunavut.

Structural Architecture and Mineralogical Relationship in Chitradurga Schist Belt, Dharwar Cration, South India

Abstract: The succession in the late Archaean supracrustal belts in the Chitradurga region begins with basal quartz-pebble conglomerates and quartzites which were deposited on a basement of tonalitic--granitic gneisses, ca. 3000 Ma, containing tracts and enclaves of older supracrustal rocks. Thebasal beds are overlain by basic metalavas and amphibolites interbeddedwith crossbedded quartzites and siliceous phyllites. This series passes up into siliceous phyllites, locally containing a large lenticular mass of polymict conglomerate (Talya Conglomerate), overlain by banded iron formations and siliceous phyllites including sporadic chert pebble conglomerates. Greater subsidence in part of the basin accommodated greater thicknesses of basic volcanic and acid pyroclastic rocks, the latter being more abundant at higher levels. With progressive deepening of the whole basin, finegrained, graded greywackes and local polymict conglomerates (Aimangala Conglomerate) were deposited ; the turbidite sequence forms the youngest sedimentary rocks exposed.Estimated total stratigraphic thickness is at least 10 km indeeper parts of the basin. Deformation led to a series of upright anticlines and synclines and relatedLS fabrics with extreme variations in plunge of the coaxial fold axes and Lfabrics within axial surfaces which maintain a steep orientation. Low-grademetamorphism outlasted the deformation. Sedimentation and volcanism in the Chitradurga supracrustal belt is linkedto variable subsidence of the basement foundation, probably as a result of rifting. The structural evolution of the belt followed as a direct continuation of events that controlled the depositional and volcanic history. Variable displacement of the basement during theselate Archaean events in the Karnataka craton took place on shear zones and related fractures that acted as channels for water and CO: asindicated by vein minerals and alteration products. Uplift of basement segments and their distension by granitic diapirs led to deformation of thesupracrustal cover made ductile by its high water content

Middle Aptian Orbitolinid limestones in Belgrade (Serbia): microfacies and depositional environment

Lower Cretaceous (Aptian) shallow-marine limestones with intercalated polymictic conglomerates were investigated with respect to their biostratigraphic age and their microfacies. They are the younger part of the generally carbonate-siliciclastic Lower Cretaceous deep-water (max. few hundred metres) turbiditic sequences (“Paraflysch”) of the so-called East Vardar zone in the Belgrade area. The biostratigraphic age of the limestones was determined by orbitolinid foraminifera: the co-occurrence of Dictyoconus? pachymarginalis SCHROEDER and Mesorbitolina texana (ROEMER) besides various other microfossils suggest a biostratigraphic age of this shallow- marine limestone succession as middle Aptian (Gargasian). Radiolarite components in the conglomerates are Triassic in age and were derived from the obducted Middle Triassic to Middle Jurassic Neo-Tethys ophiolites and/or their ophiolitic mélanges on the wider Adria plate. From both the first precise biostratigraphic age dating as middle Aptian combined with microfacies analysis of these shallow-marine limestones and the component spectrum in the intercalated conglomerates, it can be concluded that the Lower Cretaceous turbiditic “Paraflysch” succession was deposited on the eastern rim of the Dinarides. The results will allow a better comparison of the different Lower Cretaceous sedimentary successions deposited on the eastern margin of the Dinarides.

Origin, nature, and evolution of the northern Pontiac subprovince, Canada: Insights from the intrusive record

The metasedimentary subprovinces of the Superior Province provide critical insights into the tectonic style and thermal state prevailing during its Neoarchean cratonic assembly. The Pontiac subprovince consists of metamorphosed turbiditic sequences with minor interlayered mafic volcanic rocks that are intruded by abundant mafic to felsic plutonic rocks of different geochemical affinities, and for which the source, timing, deformation, and relationship to metamorphism and gold endowment are poorly constrained. Petrological, geochemical, isotopic (Lu-Hf zircon), and geochronological (U-Pb zircon and monazite) data reveal three plutonic events consisting of 1) c. 2764 Ma medium-pressure TTG gneiss, interpreted as the local basement to the Pontiac supracrustal sequences; 2) syn- to late- sedimentary c. 2690–2670 Ma juvenile (mean εiHf = 4.02 ± 1.12) monzonite sanukitoid and highly potassic calc-alkaline sills and plutons; and 3) voluminous c. 2670–2620 Ma S-type granite sourced by protracted partial melting of sedimentary rocks at depth. This succession in the intrusive record combined with syn-depositional volcanism and subsequent Barrovian metamorphism of the metasedimentary host rock is consistent with a transition from a continental rift setting to crustal thickening via terrane assembly and challenges early models of arc accretion.

Multi-source data analysis to assess the past and present kinematics of the Pisciotta Deep-Seated Gravitational Slope Deformation (southern Italy)

Although Deep-Seated Gravitational Slope Deformations are well-known in the literature, their evolution and kinematics are still poorly understood. Their behavior is often complex and characterized by small movements associated with steady-state creep, alternating with periods of stasis, or accelerating downslope movements that, in some cases, could result in sudden and catastrophic failure events. Therefore, a multidisciplinary approach is often required. In this work, we shed light on the complex geometry and kinematics of the Pisciotta DSGSD, a deep-seated roto-translational sliding involving structurally complex turbiditic rock mass and interacting with man-made infrastructures. To reveal the geometrical features and the spatial and temporal behavior of the analyzed phenomenon, a multidisciplinary investigation was performed. Typical DSGSD landforms were mapped employing in-situ surveys, aided by stereoscopic analysis of historical aerial images and high-resolution drone-based mapping. Structural data and ancillary ground-based surveys revealed the presence of a highly weathered and folded turbiditic sequence, with competent sandstone and calcarenite units alternated by tectonically disrupted, weak argillite and mudrock layers. Remote sensing measurements from optical imagery and Synthetic Aperture Radar satellite data assessed the DSGSD's past and current kinematics, allowing to distinguish a pre-failure period with accelerating displacement rates, a failure period with maximum displacement rates, and a current post-failure period with decelerating displacement rates. Analytical modeling established the deep reach (up to 85 m) of the studied DSGSD as it allowed the estimation of its bottom surface and volume, as verified by available boreholes and inclinometric measurements. Furthermore, numerical modeling outcomes highlighted how the progressive weakening and alteration of the DSGSD material, in conjunction with changes in groundwater dynamics, serve as the primary mechanisms driving the observed kinematics. The models also revealed the intricate interaction between the DSGSD and the neighboring infrastructures.

Transport and depositional processes of organic matter evaluated by biomarker profiles in Miocene turbiditic sequences from Hokkaido, Japan

Extrabasinal turbidity currents, also known as hyperpycnal flows, can deposit vast amounts of organic carbon to the marine realm. On the other hand, intrabasinal turbidity currents are commonly thought to resuspend and further oxidize organic matter (OM), creating deposits with poor preservation of terrestrial OM. However, recent studies have shown that intrabasinal turbidity currents can still preserve terrigenous OM after reworking previously deposited OM-rich sediments. As such, both types of turbidity currents may act as unconventional source rocks. Considering that there is a discrepancy between global carbon burial fluxes in the marine environment and the amount of organic carbon delivered by rivers, OM preservation within such sandy deposits should not be overlooked. We investigated both plant fragment-rich extrabasinal and intrabasinal turbidites of the Miocene Kawabata Formation (Hokkaido, Japan) by using biomarker distributions within different facies formed by changes in sediment concentration due to progressive deposition during waning flow. Clear distinctions in terms of sedimentological features and organic geochemical characteristics between different facies were found and are interpreted to be caused by different OM sources and sedimentological processes. The sandy extrabasinal turbidites have high amounts of organic carbon, high pristane/phytane ratios, and fewer amounts of marine algal biomarkers due to direct transport from the terrestrial environment without mixing with marine waters. Intrabasinal, Bouma-type turbidites generally have poor OM, and low pristane/phytane values but high concentrations of algal biomarkers since sediments are sourced from the marine environment. In both extrabasinal and intrabasinal turbidites of this study, the plant fragment-rich sandy layers deposited by flows with lower sediment concentrations preserve high amounts of terrigenous OM, possibly due to having densities allowing woody plant fragments to remain within the flow and corresponding deposit, while basal Ta sandstones and Te hemipelagic deposits contain more marine OM due to erosion plus incorporation of marine sediments and mixing with marine waters respectively. Mud clasts formed in basal flows such as surge-like intrabasinal turbidity currents may also enhance OM preservation in plant fragment-poor sandstones.

Clastic carbonates in the South Sistan Basin (SE Iran): implications for subduction vergence and timing of collision

ABSTRACT The N–S-trending Sistan Suture Zone in East Iran results from the collision of the Lut and Afghan continental blocks. The southern Sistan Basin hosts Eocene terrigenous deep-marine turbiditic sequences with carbonate olistoliths, debris-flow sheets and calcareous turbidites. These carbonates represent one or several early to middle Eocene carbonate platforms fragmented and redeposited in a deep-marine environment. Palaeocurrent measurements on the terrigenous and calcareous turbidites show that the source carbonate platform was located on the Afghan active margin. Volcanic debris in the limestone and surrounding turbidites corroborate an active magmatic margin on the Afghan side. The formation of limestone debris-flow sheets is attributed to increased erosion and retreat of the carbonate platform, potentially triggered by the closure of the Sistan Basin and continental collisions in the late middle Eocene, after subduction of the Sistan Ocean beneath the Afghan Block.

Geochronology of the Daitari Greenstone Belt, Singhbhum Craton, India

The Singhbhum Craton in India contains well-preserved Palaeoarchaean greenstone belts that rival their Australian and South African counterparts, but their stratigraphic make-up remains to be resolved. Here we provide new SHRIMP- and LA-ICP-MS-based U–Pb and Lu-Hf data on magmatic and detrital zircons from stratigraphically resolved samples of the Daitari Greenstone Belt (DGB) in the south of the Singhbhum Craton. A minimum age for the Kalisagar Formation, the lowermost mafic–ultramafic volcanic suite of the DGB, is provided by a felsic sill dated at 3505 ± 6 Ma. Felsic volcaniclastic rocks from the overlying Talpada Formation provided a weighted mean age of 3507 ± 5 Ma. Zircon εHf(t) indicate a juvenile source for 3.5 Ga felsic volcanic rocks. Erosion of the volcanic edifice of the Talpada Formation acted as a predominant source for the overlying turbidite sequence of the Sindurimundi Formation, having identical U-Pb detrital zircon ages of ∼ 3505 Ma. A maximum age of deposition of 3502 ± 2 Ma is proposed for the Sindurimundi Formation. Magmatic zircon ages obtained from different intrusive felsic rocks in the Daitari belt ranges from c. 3.37 to 3.35 Ga and support the notion of widespread felsic magmatism of the Singhbhum Suite in the southern part of the craton. Xenocrystic zircon crystals dated at c. 3.55 to 3.52 Ga may correspond to an earlier phase of magmatism. 3.5 Ga marks an important period in the Earth’s history, when extensive felsic magmatism facilitated continental crustal growth as recorded in the Singhbhum, Kaapvaal and Pilbara cratons.

Sensitivity of marginal basins in recording global icehouse and regional tectonic controls on sedimentation. Example of the Cergowa Basin, (Oligocene) Outer Carpathians

Global sea-level fall during the late Eocene-Oligocene icehouse, in conjunction with the Alpine orogenesis, resulted in the epicontinental Paratethys Sea formed at the northern margin of the Tethys Ocean. Among the Paratethys sub-basins, the foreland Dukla Basin hosted dark dysoxic Menilite Shales. Within these the lenticular body of deep-marine Cergowa Beds was deposited. Due to its marginal position and orogenic activity, the Cergowa depocenter was sensitive to a broad range of influences reflected by: separation from and re-connection with the Tethys Ocean; reactions to global sea-level change; variations in calcareous nannoplankton palaeoecology and fluctuations in water chemistry; changing sediment gravity flow mechanisms; facies progradation and basin tectonics; palaeotransport direction; and changes in the calcite compensation depth. The proximal north-western part of the Cergowa depocenter consisted of two troughs evolving towards the south-east into an unconfined distal area. This is shown by palaeocurrent patterns changing down current from low-dispersion to fanning out distributions. Sedimentation during the succeeding NP23 nannoplankton zone was controlled by glacio-eustatic shallowing, enhanced by tectonic uplift, both resulting in isolation from the Tethys Ocean, forming a brackish environment affected by fluvial supply. Aggrading sand-rich proximal turbidite facies common at this stage include hyperpycnally-generated sustained turbidites that were sourced from shelf-edge delta, as well as hybrid event beds that reflect erosion of morphologically unbalanced slopes modified by fold-thrust tectonics. Nannoplankton of the succeeding NP24 zone documents normal salinity of an open sea that was reconnected with the Tethys Ocean, which is contrary to the global cooling and related eustatic sea-level lowstand during this time. At this stage, deposits of low-density turbidity currents predominate and form a succession prograding towards the south-east. Therefore, the oceanic reconnection was likely controlled by local subsidence, the rate of which exceeded the rate of deposition, especially in the south-east. The reconnection also influenced the calcite compensation depth level and resulted in an increase in coccolithophore productivity, recorded by laminated pelagic limestone interbeds within the youngest fining-upwards part of the Cergowa Beds succession. This fining-upwards sequence of low-density turbidites reflects retrogradation of the arenaceous material within the distributary system and a transition to mudstone-dominated disoxic facies of the Menilite Beds, being the most productive hydrocarbon and helium source rock unit in the Outer Carpathians. These processes and relationships show that due to the marginal position of the synorogenic basin, the Cergowa Beds record environmental sensitivity to extrabasinal and intrabasinal factors, and a broad range of global, regional, and local influences, thus providing insights applicable to research into the evolution of other basins placed in a similar context.

Sedimentological Analysis of the Turbidite Sequence in the Northern Part of the West Crocker Formation, Northwest Sabah

Gravity-flow deposits form the northern part of the Crocker Formation (Oligocene–Early Miocene), with the most significant interpretation as a sand-rich system in the proximal and a mud-rich system in the distal area of the deep-water turbidite depositional setting. Seven outcrop localities in the northern-part area were selected for mapping and sampling, starting from Kota Kinabalu up to the Telipok area to evaluate the sedimentary sequence. This study used mapping, field observation, and log sketches in the field, as well as extensive analysis and interpretation of sedimentological methods to investigate the sequence of sediment outcrops in the Crocker Formation area of northwest Sabah. During the fieldwork, five main facies were found, namely, massive sandstone facies (f1), graded sandstone facies (f2), laminated sandstone facies (f3), interbedded sandstone and mudstone facies (f4), and mudstone facies (f5). These northern-part outcrops are interpreted as being deposited from the highest to the lowest turbidity currents and the actuality of pelagic mudstone deposition, based on their fining-coarsening-upward pattern. The five geometrical bodies were proposed as laterally contiguous depositional environments, namely, (1) inner fan channel, (2) inner fan channel–levee complex, (3) mid-fan channelized lobes, (4) non-channelized lobes/distal lobes, and (5) basin plains. The facies interpretation shows that the study area consists of lobes, channel–levee complexes, and levees formed in a fan of a deep-water basin setting, with the basinal plain enveloped by thick mudstone deposits. This northern part of the Crocker Formation is interpreted as a multiple-sourced sediment, shelf-fed, Type II, low-efficiency, and sand-rich turbidite depositional system.

Geochemical properties of Eocene turbiditic sequence from Bayburt (NE Turkey): organic matter input, paleoenvironment, and paleoclimatic conditions

Geochemical properties of Eocene turbiditic sequence from Bayburt (NE Turkey): organic matter input, paleoenvironment, and paleoclimatic conditions

ANALISIS FASIES PADA FORMASI MENANGA, PEKON GUNUNGKASIH, TANGGAMUS DAN SUNGAI WAY SABU, PESAWARAN, LAMPUNG

The Menanga Formation is part of the Woyla terrane, the last large terrane amalgamated formed island of Sumatra. Woyla terrane consist of Cretaceous arc assemblage and relatively lack of research has been done on this formation in Lampung and surrounding areas. This study aims to identify the facies of the Menanga Formation. Research was carried out by making a measured stratigraphic and dividing it into facies and facies associations. The data were taken from two places, in Gunungkasih, Tanggamus and Way Sabu, Pesawaran, Lampung. The results showed that the Menanga Formation has eight facies, there are red claystone (F1), gray claystone (F2), bioturbated siltstone (F3), laminated siltstone (F4), laminated fine sandstone (F5), Parallel sandstone (F6), ripple sandstone (F7), loadcast sandstone (F8), and graded bedding sandstone (F9). The Menanga Formation facies were grouped into two facies associations, namely levee facies association (AF1) and channel facies association (AF2). AF1 consists of F1, F2, F3, F4, and F5 which shows the upper part of the turbidite sequence while AF2 consists of F5, F6, F7, F8, and F9 which shows the lower part of the turbidite sequence. The Menanga Formation shows siltstone dominance with sedimentary structure formed due to turbidit current and stacking pattern show fining upward-thinning upward indicate midfan lobe environment The Menanga Formation interpreted to be deposited in submarine fan environment whose sediment material originates from the Woyla volcanic arc.

High-resolution sequence stratigraphy applied to turbidites: The case study of jurassic los molles formation, Neuquén basin, Argentina

High-Resolution Sequence Stratigraphy is fundamental for attaining a refined and representative geological 3D model for oil and gas reservoirs. For its application on turbidite systems it is essential to have a robust facies and facies association framework, recognizing architectural elements and the cyclicity in different frequencies on the stacking pattern. This study is widely based on a multi-scale approach (4th and 5th orders), integrating satellite image, outcrop descriptions and microscopic data to achieve a predictive depositional model through time. The Jurassic Los Molles Formation, Neuquén Basin, was chosen as a case study due to its outcrop quality of offshore shelf (Carreri section) and slope/basin plain settings (La Jardinera section). This enabled a rich comparison between facies associations, architectural elements, stacking patterns and cyclicity on turbidite systems of different palaeo physiographic settings. The Carreri offshore shelf turbidites display higher confinement with predominance of tractive structures and coarser grain-sizes as opposed to deepwater deposits. Their base level variations are recorded by the stacking of turbidite channel-overbank systems to delta front deposits and tidal bars that culminate important regressions. In contrast, in La Jardinera slope and basin plain succession, the falling stage system tract of turbidite sequences is characterized by amalgamated composed lobes and wide composed channels with coarser grain-sizes and erosive contacts. The lowstand system tract is represented by less amalgamated lobes and interlobes, suggesting the system backstepping until the muddy transgressive system tract. The workflow of this study allows a better understanding of the evolution of a sedimentary system, correlating this to important stratigraphic surfaces that can represent fluid flow barriers and reservoir heterogeneities that could impact on production data. High resolution sequence stratigraphy, especially in turbidite systems, is key for more accurate reserve estimates and for developing predictive and economic exploration and production strategies in the petroleum industry.

Morphology of Radhostium carpaticum Plička and Říha, 1989 in new finds from the Outer Western Carpathians (Upper Cretaceous – Eocene flysch deposits of the Biele Karpaty Mountains, Slovakia)

A new find of one specimen of the relatively rare trace fossil Radhostium carpaticum is the subject of this morphological study. The new find from the Biele Karpaty Unit, is preserved on the soles of turbiditic sandstones within the Upper Cretaceous and Eocene turbiditic sequence of the Svodnice Formation in the Biele Karpaty Mountains, Slovakia. The morphological study of the trace fossil is based on this and the available published individuals of Radhostium. The burrow reveals a regular morphological system consisting of cylindrical U-shaped shafts (elements) arranged in a row linked by a horizontal burrow. Morphology shows that the trace fossil most likely corresponds to an open burrow system of domichnion without back fill. This morphology indicates that it is essentially a branched burrow and does not represent the chevron structure typical for trace fossils of molluscs. However, this morphology is comparable to no known form, so the producer of the trace fossil cannot be reliably determined. Referred ichnospecies of Radhostium have been recorded in three geographic regions (Alps, Carpathians, Apennines). All specimens of R. carpaticum occur in Upper Cretaceous and Palaeocene turbiditic deep-marine sequences. Thus, Radhostium occurs within a relatively narrow stratigraphic range in interconnected palaeogeographic areas in the Western Tethys.

Structure, metamorphism, and mica40Ar/39Ar thermochronology of the southern Purcell anticlinorium and its transition into the central Kootenay arc, Omineca belt, southeastern British Columbia

The Purcell anticlinorium (PA) and the Kootenay arc (KA) are two adjacent Mesozoic tectonic domains in the southeastern Omineca belt of the Canadian Cordillera. Mesoproterozoic rocks of the Belt-Purcell Supergroup (BPSG) core the PA and have open, upward-facing structures. Deeper levels of the BPSG (Aldridge Formation) preserve a Mesoproterozoic phyllitic cleavage (S1) and biotite zone mineral assemblages. The KA, on the west flank of the PA, has a younger Neoproterozoic through Paleozoic stratigraphy. The central part of the KA, the focus of this study, experienced Jurassic recumbent folding and greenschist facies metamorphism that was overprinted by Early Cretaceous ductile deformation (S2schistosity) and Barrovian metamorphism. The interface between the PA and KA is taken as the easternmost occurrence of the S2schistosity. K–Ar and40Ar/39Ar mica dates in the PA range from 1318 to 240 Ma and show no consistent spatial distribution. They are interpreted to reflect partial resetting of Ar following initial cooling in the Mesoproterozoic, indicating that the PA was never sufficiently buried or heated during younger tectonism to uniformly reset the mica cooling ages. In the KA,40Ar/39Ar dates range from 139 to 55 Ma and reflect previously documented periods of Mesozoic and Cenozoic metamorphism, magmatism, and exhumation. The PA–KA interface occurs above a west-dipping ramp in the Laurentian basement. The thick Mesoproterozoic sequence of turbidites and sills in the PA may have acted as a rigid buttress against which the more ductile rocks of the central KA “piled up” during Early Cretaceous compressional orogenesis.

Mass wasting along the Cascadia subduction zone: Implications for abyssal turbidite sources and the earthquake record

The only submarine records of large (>Mw7) prehistoric earthquakes along the Cascadia subduction zone are derived from sequences of deep sea turbidites interpreted to represent synchronous, shaking-induced failures along the continental slope. However, the spatial correlation of these deposits along the margin is complicated and the chronological constraints involve significant uncertainties, raising questions about how these deposits were generated. Here we present the most comprehensive spatial database of seafloor failure scarps across the Cascadia margin to date, with more than 8700 features mapped. We observe pervasive mass wasting of the steep lower slope along the ∼800 km length of the margin. This portion of the margin is heavily deformed, uplifted and oversteepened, such that it may be optimally preconditioned to fail during intense shaking events. Our results suggest disintegration of the steep lower slope is likely the primary source of turbidity flows triggered by earthquake shaking in Cascadia. This more proximal source for seismoturbidite generation may be the principal process along subduction margins with steep lower slope topography and may explain why seismoturbidites are found in areas containing few submarine canyons. Furthermore, the extensive mass wasting present on the steep lower slope of central Cascadia, a critical 250 km long section where no records currently exist, suggests additional turbidite records may be found along this portion of the margin by selecting optimal sample sites based on failure patterns. The strong clustering of seafloor failures along the lower slope also suggests the most earthquake intense shaking may be spatially restricted to a narrow zone along the deformation front, which could have important implications for hazard predictions across the region.

Tectonic evolution of the Triassic Songpan‐Ganzi basin as constrained by a synthesis of multi‐proxy provenance data

AbstractThe triangular Songpan‐Ganzi flysch terrane exposes a Triassic turbidite sequence with an average thickness of ca. 8 km. The sediments may have been accumulated in a remnant Paleo‐Tethyan ocean bounded by the converging North China, South China, and the Qiangtang terrane from three sides, or a back‐arc basin with an oceanic basement created during the Triassic closure of the Paleo‐Tethyan ocean. To differentiate the two competing models, we systematically reviewed the available provenance data that include U–Pb detrital zircon ages at the basin scale, paleocurrent directions, sandstone petrography, and heavy‐mineral assemblages from the Triassic Songpan‐Ganzi basin samples. We use the Kolmogorov–Smirnov tests to differentiate competing hypotheses for detrital‐zircon provenance interpretations and DZmix modelling to quantify relative contributions of detrital zircon from all potential source areas for the Triassic Songpan‐Ganzi deposits. The most important result of this work is that the Songpan‐Ganzi basin had a stable and locally derived source system: the western, central and eastern sub‐basins were mainly sourced from the north whereas the easternmost and southeastern sub‐basins were mainly sourced from westernmost South China (i.e., the Longmen Shan area) and the Qiangtang terrane. The stability of the source areas around the Songpan‐Ganzi basin throughout the Triassic is most compatible with the remnant ocean model that predicts a long‐lived marine basin with a pre‐Triassic oceanic/continental basement trapped between converging continental blocks during the Triassic.