TRNSYS Software Research Articles

Sustainable commercially-scaled greenhouse building cooling solution: Integrating PCM storage, desiccant wheels, and absorption chillers powered by dual-source solar/biomass energy

This research aims to address the critical need for sustainable cooling systems in greenhouses, particularly relevant in mitigating global warming impacts and enhancing food security worldwide. The urgency becomes more pronounced in locations experiencing high ambient temperature and humidity. The study introduces an innovative cooling system integrating Phase Change Material, a desiccant wheel, and an absorption chiller, powered by solar and biomass energy. This novel system aims to efficiently regulate temperature and humidity in greenhouse environments. The performance of this system is examined in Abu Dhabi, Doha, and Riyadh during the summer months, utilizing TRNSYS software for a medium-scale greenhouse model. Additionally, a comprehensive Life Cycle Assessment is carried out to quantify the environmental impacts of the proposed system. Results indicate that in Abu Dhabi, the system yields a Coefficient of Performance (COP) of 1.108, effectively maintaining indoor climate conditions. Similarly, Doha and Riyadh exhibit COPs of 1.015 and 0.827, respectively. In terms of solar energy utilization, Abu Dhabi demonstrates a solar fraction of 40.4, corresponding to the lowest Global Warming Potential (GWP) at 0.106 kg CO2eq per 1 kW of provided cooling capacity. Conversely, Riyadh records the highest GWP at 0.149 kg CO2eq, followed by Doha at 0.118 kg CO2eq. The Energy Payback Time (EPBT) for the system in Abu Dhabi is calculated to be 3.96 years, the shortest among the examined cities. In comparison, Doha and Riyadh present longer EPBTs of 4.48 and 5.83 years, respectively. These findings suggest that the proposed system offers a viable and environmentally friendly alternative to conventional greenhouse cooling approaches.

Investigation of Chinese-Style Greenhouse Usage Across Europe

Chinese-style greenhouses (CSGs), characterized by a distinct geometric shape compared to traditional greenhouses, are extensively utilized in China. In this study, this type of greenhouse was modeled using TRNSYS software version 18 and experimentally validated. The model can transiently determine the indoor conditions of the greenhouse and the requirement for additional heating. It calculates the heat loss due to plant evapotranspiration as well as all the heat gains and losses from the surfaces. The application of this greenhouse has been investigated from the southernmost to the northernmost regions of Europe. For this purpose, cities located at different latitudes (between 32.63° N and 69.65° N) were entered into the model, and the results were obtained and compared. The analysis conducted over the entire year demonstrated that the CSG indoor temperature is more dependent on solar energy during the day and on outdoor temperature at night. The two southernmost cities in our survey, Funchal, Portugal (32.63° N) and Luqa, Malta (35.83° N), had no winter heating requirement. The thermal covering was sufficient to minimize night heat loss and maintain a suitable indoor temperature. In northern cities, the heating requirement was relatively high due to the lower outdoor temperature and solar radiation. Consequently, the duration of the heating season increases towards the north. In the northernmost city, Tromso, Norway (69.65° N), the heating season was determined to last 12 months. In the absence of solar energy, the transparent surface of the greenhouse is covered with thermal insulation to prevent heat loss. It has been shown that with the appropriate selection of this thermal covering, which is controlled based on the presence of instantaneous solar energy, up to 80% savings can be achieved from additional heating in southern cities. In the north, this rate can be increased up to a maximum of 70% by increasing the thermal covering thickness.

Performance analysis of solar-assisted ground source heat pump in severe cold regions

ABSTRACT Long-term operation of a ground source heat pump (GSHP) in severe cold regions leads to a gradual decrease in subsurface soil temperature, affecting system performance. This paper proposes a solar assisted ground source heat pump (SAGSHP) system consisting of solar photovoltaic thermal (PV/T) and GSHP. Through TRNSYS software, the system was analyzed for 10 years of dynamic simulation in a severe cold region. The results are listed below: (1) The SAGSHP system is capable of effectively lessening the maximal temperature of photovoltaic (PV) modules in Changchun, Shenyang, and Harbin, China, by 21.73%, 13.67%, and 19.10%, respectively. The power generation efficiency of PV modules in these three locations can be maintained at about 22% year-round. (2) After ten years of operation, the coefficients of performance (COP) of the heat pumps have increased by 5.70%, 6.80%, and 5.01%, respectively, relative to the first year, showing good stability. (3) The soil temperatures at all three locations were stabilized during the ten years of operation. This study provides a theoretical basis for devising and installing SAGSHP in severe cold regions.

A new validated TRNSYS module for phase change material-filled multi-glazed windows

Incorporating phase change materials (PCM) into multi-glazed windows (MW) has been recognized as an effective way to regulate the indoor thermal environment and reduce the energy consumption of buildings. However, the design and calculation of PCM-filled multi-glazed windows (MW + PCM) remain challenging due to the lack of general transient simulation methods and integrated tools. To address this issue, the present study developed a dynamic coupled thermal and optical model for MW + PCM based on the enthalpy-temperature and interface energy balance methods. Then, the model was implemented in C++ and integrated into the TRNSYS software as a new module (Type 2602). In parallel, a test platform comprising two test chambers was established to evaluate the effect of PCM on the thermal and optical properties of the window and to validate the newly proposed module. It was found that compared to the traditional triple-glazed window (TW), the PCM-filled triple-glazed window (TW + PCM) effectively reduces the irradiance through the window by 34.17 % and the maximum temperature of the inner surface by approximately 5.56 °C. While the increase in external surface radiation flux density from 600 to 1200 W/m2 has a diminishing effect on the heat flux variation rate during the heat dissipation process for TW + PCM, it effectively shortens the latent heat absorption time by 0.50 h and increases the temperature difference between the inner and outer surfaces by 3.02 °C. The new module demonstrates satisfactory accuracy through experimental validation and simulation comparisons, with the maximum heat flux coefficient of variance of the root mean square error (CV(RMSE)) less than 6.35 % and 11.25 % under TW and TW + PCM configurations.

Occupant’s behavior investigation related to the building openings in a rural pavilion: A case study of a bioclimatic designed building in a hot semi-arid climate

This study targets the building openings management as a sustainable, passive, cost-effective technique in a rural context with limited budget. Ensuring health and well-being and promoting energy-saving in building operation phase based on natural ventilation and sun management in interaction with the building design. The study utilizes thermo-aeraulic simulation through TRNSYS software, exploring the effects of altered seasonal day and night ventilation and vertical shading management. The findings highlight the significant impact of night natural cross ventilation on energy saving during June and September. Conversely, for July and August, early morning cross ventilation proves to be a more effective option for refreshing the indoor environment. During the cold season, minimizing or avoiding natural ventilation, especially cross ventilation, is advised; in addition, the mandatory overhangs on the south side and the vertical adjustable blinds enhance the energy saving inside the building. With a humidity interval ratio of 30 % to 70 % and two different set-point temperature ranges of 18 °C-28 °C and 20 °C-26 °C respectively, the annual thermal loads per square meter for two of the simulated scenarios are optimal, measuring 22.28 kWh/m2 and 22.85 kWh/m2 compared to 56 kWh/m2, respectively. These results can be further optimized by altering both types of ventilation mentioned earlier.

Performance and PV benefits analysis of multi-source renewable energy systems for different types of buildings on university campus

Due to the large campus area and high personnel density, universities experience significant building energy consumption. The comprehensive utilization of renewable energy can greatly alleviate energy consumption in higher education institutions. To explore the application prospects of renewable energy systems in universities, this study takes a university in Wuhan as a case example, investigating the performance and potential of various types of Photovoltaic-assisted Heating, Ventilation, and Air Conditioning (PV-HVAC) systems. First, the building load was calculated using DeST software. Subsequently, the potential for solar energy application on campus was assessed using a combination of QGIS, Labelme, and Python. Moreover, three types of PV-HVAC systems were designed for five categories of buildings based on their distinct characteristics, and TRNSYS software was utilized for performance simulation and analysis. The results indicate that the annual performance coefficients of the three systems are 3.8, 3.2, and 4.5, with corresponding annual energy self-sufficiency rates of 114 %, 72 %, and 32 %, respectively. Finally, the overall energy self-sufficiency rate of the PV-HVAC system across the campus is 65 %. This research provides valuable insights for achieving nearly zero-energy HVAC systems in university campuses.

Development and tests of the novel configuration of the solar chimney with sensible heat storage

Heating, ventilation, and air conditioning systems account for a significant part of the energy usage in buildings and are primarily responsible for greenhouse gas emissions and operating costs. These can be lowered by the adoption of solar energy. This paper presents the developing and testing of a novel solar chimney with sensible heat storage. The thermal performance and potential contribution of the developed thermal chimney to decreasing residential buildings energy consumption in Polish climate conditions is investigated. The developed solar air chimney is composed of a novel accumulation material that allows for sensible heat storage. Solar radiation can heat the accumulation layer during the day and the stored energy can be used to preheat the ventilation air. The prototype of the solar chimney was tested in laboratory conditions using a dedicated experimental rig. Furthermore, numerical calculations were performed using TRNSYS software, where a validated dynamic numerical model was developed to simulate the performance of the device. The results show that airflow direction, volume, and the number of heated walls significantly impact the power transferred from the solar chimney walls to the air. The maximum power transferred from the solar chimney walls to the air per unit of surface varied from 360.2 W/m2 (when all walls were heated) to 672.4 W/m2 (when only one wall was heated). The validated model underestimates the outlet air temperature of the solar chimney by a maximum of 0.39 °C on average basis and shows that the increase of air temperature between −10 and 20 °C at 1000 W/m2 determines a decrease of 12.5 % of the thermal output. The obtained results allow one to highlight that the proposed solution can be considered as a replacement for typical brick chimneys located on roofs or as a thermal storage wall.

Heating Performance and Energy Efficiency Analysis of Air-Source Heat Pumps in Public Buildings Across Different Climate Zonings

Article Heating Performance and Energy Efficiency Analysis of Air-Source Heat Pumps in Public Buildings Across Different Climate Zonings Junbao Fan 1, Yilin Liu 1,*, Jing Ma 2, Ying Cao 1,2, Zhibin Zhang 1, Xin Cui 1 and Liwen Jin 1,* 1 School of Human Settlements and Civil Engineering, Xi’an Jiaotong University, No. 28 Xianning West Road, Xi’an 710049, China 2 China Architecture Design and Research Group, Beijing 100044, China * Correspondence: ylliu@xjtu.edu.cn (Y.L.); lwjin@xjtu.edu.cn (L.J.) Received: 11 July 2024; Revised: 3 September 2024; Accepted: 5 September 2024; Published: 20 September 2024 Abstract: Public buildings exhibit the highest operational energy consumption and contribute the most to carbon emissions compared to other types of building. The electrification of energy terminals in public buildings is crucial for the energy conservation and emission reduction, especially the energy-saving retrofitting of heating systems. Given the significant impact of climate on the performance of air-source heat pumps, this study explored the performance and energy efficiency of air-source heat pump systems in public buildings across different climate zonings. Using Design Builder software, the physical models of three types of public buildings (commercial, hotel, and office) were constructed, and the annual variations in the building load was analyzed. Considering the effects of defrosting and low-temperature conditions, an air-source heat pump heating system models were developed using TRNSYS software. The simulation results showed that the average COP of the heat pump system on the coldest day in Harbin, Beijing, and Shanghai were 1.7, 2.46 and 2.49, respectively. Moreover, the analysis factor correlation analysis reveals that the COP of the heat pump system is positively correlated with the dry-bulb temperature, negatively correlated with the building load. Surprisingly, the COP is not affected by the types of public buildings. The findings of this study are expected to provide valuable guidance for the application and regulation of air-source heat pumps in the public buildings.

Thermal Inertia Performance via TRNSYS Software of Recycled Wastewater Treatment Plant Sludge as a Construction Material Additive to Ecological Lightweight Earth Bricks

This research investigates the thermal performance of earth bricks made with different percentages of wastewater sludge additive (0%, 1%, 3%, 7%, 15%, 20%) in terms of cooling and heating loads, time lag and decrement factor. The simulation of a reference house (2.5m,10m,6m) using TRNSYS software allows for the evaluation of these parameters, external wall thicknesses, bulk density, thermal conductivity, and specific heat capacity are employed as inputs in dynamic thermal inertia model. The results showed that the use of bricks with higher sludge additive percentages resulted in a drop in cooling and heating loads, the lowest cooling and heating loads of 1720 KWH and 1534 KWH respectively were recorded with the highest percentage of wastewater sludge additive of 20% and the biggest wall thickness of 30cm, it was also noted that the use of higher wastewater sludge additive percentages and bigger wall thicknesses led to higher time lags and lower decrement factor, the highest time lag of 15 hours and the lowest decrement factor of 0.019 were as well recorded with the highest wastewater sludge additive of 20%, and the biggest wall thickness of 30cm. These results were attributed to the higher specific heat capacity, and lower thermal conductivity of the bricks with higher wastewater sludge additive percentages.

Developing simplified metamodels for assessing urban park cooling effect on the thermal behavior of the residential buildings: A case study in Nantes, France during a heat wave

The objective of this research is twofold. First, it aims to evaluate the impact of an urban park on the thermal behavior of residential buildings. Second, it focuses on developing and validating metamodels for predicting the cooling needs and summer thermal comfort of three types of residential buildings: single-family houses (Low-rise), small collective housing (Mid-rise), and large collective housing (High-rise). The metamodels are created through regression analysis, using a set of dynamic thermal simulations conducted with TRNSYS software. The number of dynamic simulations is efficiently reduced using the design of experiments method, and the accuracy of the metamodels is further validated through additional simulations. This study was conducted considering the climate weather conditions of the city of Nantes, France. The results demonstrate that an urban park can achieve a maximum reduction of 12.53 % in cooling needs and a 12.50 % maximum reduction in degree hours of discomfort, particularly when the building is protected from solar radiation. Furthermore, developed metamodels show high accuracy with regression coefficients over 0.96. This study aimed to create a decision support tool for local government departments to optimize urban cooling, improve thermal comfort, and reduce cooling loads in buildings by guiding the design of parks and their surrounding built environment.

Energy, exergy, exergy‐economic, and environmental evaluation of an optimized hybrid photovoltaic heat pump system with solar collector and PCM

AbstractNowadays, the use of hybrid systems has become very common all over the world. In this study, the aim is to minimize the use of grid energy to provide heating and cooling energy with the help of a hybrid heat pump equipped with a flat solar collector, phase change material (PCM), and photovoltaic (PV) panels. To achieve the best results, a numerical dynamic model consisting of different solar PV panels in three models, batteries, inverters, and hybrid heat pump along with collector and PCM has been modeled by solving Engineering Equation Solver (EES) and TRNSYS software. According to the proposed scenarios, multi‐objective optimization has been done to simultaneously improve the study answers in several sections by multi‐objective particle swarm optimization algorithm with MATLAB software. Also, economic and environmental optimization is also presented separately for comparing and reviewing solutions. The results of multi‐objective optimization show that the amount of lifecycle cost (LCC) when using polycrystalline panel is 21.26% lower than monocrystalline panel and 38.71% higher than thin film panel. As a result, according to the specific conditions and attitude, you can choose the desired system. Also, in the economic optimization, it was found that the best system is related to the polycrystalline panel, the volume of PCM used in the system is equal to 1 , the number of panels used is 18, and the minimum amount of LCC is $3929.08.

Theoretical and Experimental Study of a PV/T Collector by Using TRNSYS Software in Mosul City

Theoretical and Experimental Study of a PV/T Collector by Using TRNSYS Software in Mosul City

Data-driven study/optimization of a solar power and cooling generation system in a transient operation mode and proposing a novel multi-turbine modification concept to reduce the sun's intermittent effect

This study explores the integration of solar energy via parabolic trough collectors (PTC) with the Goswami cycle, focusing on evaluating life cycle costs (LCC) and energy performance in both steady-state and transient conditions. A suitable system configuration of a single-turbine Goswami cycle is designed for integration with PTC. Then, in the system's steady-state, a parametric study is performed based on the change in the design components. Subsequently, a multi-objective optimization method using energy and lifetime cost objectives are defined to identify the best system performance. This optimization technique utilizes artificial neural network (ANN) and the grey wolf optimizer (GWO) algorithm. Accordingly, the transient performance of the system is investigated during its optimal operating point using the TRNSYS software. Suitable controllers are considered for regulating power production and cooling system. Annual transient performance graphs of the systems are obtained. Following these investigations, a novel multi-turbine system is proposed. This configuration aims to enhance system reliability and diminish the reliance on storage devices by optimizing performance. The proper configuration of the five-turbine system with the required controllers is also provided. Hence, the method of dividing the turbine into similar turbines with lower capacity is a new concept proposed in this study. In the optimal state, it is observed that for 100 kW of net power output, 161 kW of effective cooling load can be achieved. At this configuration, the system's LCC amounts to 2.91 M. Moreover, during transient operation, an average power of 90 kW is attainable with a cooling load of 120 kW. The findings indicate that modifying the system from single turbine to five-turbines incurs an additional cost of approximately 9.2 % and reduces power output by 6 %. However, this modification significantly mitigates the transient impact of solar fluctuations.

Performance assessments of ground source heat pump assisted by various solar panels to achieve zero energy buildings in cold climate conditions

This paper aims to perform a comprehensive performance analysis of a solar-assisted ground source heat pump (SAGSHP) system connected to various types of solar panels to enhance overall energy efficiency. While previous studies have examined integrating solar panels with heat pumps, comprehensive solutions like those presented here and performance evaluations in the zero energy building context have been lacking. This study developed various scenarios using three types of solar panels, photovoltaic (PV), photovoltaic-thermal (PVT), and solar thermal collectors (ST), to explore their simultaneous use. TRNSYS software was employed to analyze the complex system, comparing it to a conventional natural gas boiler system as a baseline. The findings revealed that the on-site energy use intensity (EUI) decreased from 78.6 kWh/m2 to 53.3 kWh/m2, a reduction of approximately 33 %, due to the SAGSHP's implementation. The combination of PVT and PV panels emerged as the most suitable option for the SAGSHP, aligning with the net zero energy concept. The SAGSHP system achieved a low EUI of 10.4 kWh/m2 in terms of primary energy. Additionally, the solar fraction, indicating the proportion of solar energy used, reached approximately 90 %. Thus, this study underscores the significance of evaluating various solar panel configurations during the preliminary design phase of SAGSHP systems to optimize energy performance and progress toward zero energy buildings.

Machine learning optimization of a zero energy building (ZEB) by waste heat recovery in a co-generation system

Waste heat recovery is known as one of the newest methods to increase the energy and exergy efficiencies of thermal systems. The concept has been also developed in co-generation systems where productions of electricity, cooling and heating are considered, simultaneously. This study investigates tri-generation system with a co-generation ammonia-water cycle (AWC) and an organic Rankine cycle (ORC) to supply cooling, heating, and power, simultaneously. As novelty, six different working fluids of Ammonia, R124, R134a, R152a, R245fa and R290 were investigated, as six scenarios for ORC. As result, the R124 was found as the best one and the next investigations were followed just with this fluid. Minimizing total cost and maximizing exergy efficiency at the same time are the main aim of this paper. Design Expert software was used to find out about this optimum point. Four cities in Australia were selected and the effect of annual ambient temperatures of them were studied on the outputs of the system, using TRNSYS software. Also, the optimum values of the effective parameters, including the isentropic efficiencies of pumps, compressor, and turbines, heat source temperature, ammonia concentration, utmost pressures of ORC and AWC, were obtained and reported by means of TOPSIS. As results, the monthly generations in electricity, heating and cooling were estimated. It was revealed that the lower ambient temperature, the higher electricity generation, according to the thermodynamic cycle of the proposed co-generation system. Finally, the results showed that application of the suggested co-generation system can cover the electricity demand of 294 apartments, heating for 208 apartments, and cooling load for 18,999 apartments.

Advanced smart HVAC system utilizing borehole thermal energy storage: Detailed analysis of a Uppsala case study focused on the deep green cooling innovation

This article presents and thoroughly examines an innovative, practical, cost-effective, and energy-efficient smart heating, ventilation, and air conditioning (HVAC) system. The fundamental component of this concept is a state-of-the-art method called Deep Green Cooling technology, which uses deep drilling to utilize the ground's heating and cooling potential directly without the need for machinery or heat pumps. This method satisfies demands with the least energy use, environmental impact, and operational costs. In order to effectively oversee and regulate energy production, storage, and utilization, the system consists of an intelligent control unit with many smart controllers and valves. Renewable energy deployment is made easier, and the intelligent automation unit is more compatible with the help of a high-temperature cooling resource with a high supply temperature of 16 °C. The technical, environmental, and financial aspects of the suggested smart office building system in the southern region of Uppsala, Sweden, are evaluated using TRNSYS software. According to the results, boreholes provide more than 28.5 % of the building's energy requirements by utilizing the ground's ability to generate affordable, dependable seasonal thermal energy. The district heating network satisfies the remaining demand, amounting to 787.2 MWh, highlighting the benefits of combining conventional and renewable energy sources for increased supply security and dependability. The borehole thermal energy storage system meets the building's entire cooling need, underscoring the importance of high-temperature cooling systems. The most expensive part of the system is the borehole thermal energy storage, which accounts for over half of the total investment. The system has an appropriate payback period of ten years, proving its long-term profitability and cost-effectiveness, thanks to removing the machinery and heat pump. With 3138 MWh of ground-source heating and cooling, the system saves 17,962 USD by reducing CO2 emissions by about 143.7 t, sufficient to grow 16.3 ha of trees throughout the payback period.

Performance simulation and analysis of a solar-assisted multifunctional heat pump system for residential buildings

ABSTRACT As building electrification is recognised as an important opportunity to reduce greenhouse gas emissions, the integration of solar energy and heat pump represents a promising solution towards net-zero carbon buildings. This paper presents a hybrid multifunctional solar-assisted heat pump (SAHP) system that can provide space heating, space cooling, domestic hot water, and onsite electricity generation. Photovoltaic-thermal collectors are used for electricity generation, heat collection, and radiative cooling. The system design and controls support fourteen operational modes involving different components. TRNSYS software is used to model and simulate the multifunctional SAHP system. With a 2-m3 storage tank and 30-m2 PVT collectors, the multifunctional SAHP system has a seasonal performance factor of 2.7 in Baltimore and 3.7 in Las Vegas. The onsite electricity generation can cover 53% of the building’s electricity needs in Baltimore and 83% in Las Vegas.

Performance analysis of a PV/T shading device for enhancing energy saving and human comfort

Blinds have been widely installed in glazed facades to reduce cooling loads and enhance indoor comfort. However, current blinds struggle to efficiently utilize incoming solar energy and cater to the seasonal thermal demands of buildings. To address these challenges, this paper introduces a novel PV/T shading device designed to utilize solar energy on blinds for both electricity generation and heat provision throughout different seasons. To comprehensively assess its performance, an office building was selected as a case study in a region experiencing both heating and cooling demands. The self-fabricated PV/T shading device underwent rigorous testing to validate a developed mathematical model. This model, integrated with TRNSYS software, was used to predict energy performance, while Radiance and Ladybug tools were adopted to assess indoor visual and thermal comfort. After implementing the PV/T shading device with optimized capacity, the NPV of the building over its life cycle was increased by 9709.9 RMB. The time percentage of thermal comfort was improved by 81.7%, and the indoor useful daylight illuminance was increased by 57.2%. Additionally, the glare autonomy was enhanced by 23.3% to 33.6%. Compared to common blinds and PV blinds, the PV/T shading device offered an increase in annual electricity benefits of 131.6 kWh/m2 and 111.6 kWh/m2, respectively, along with an increase of NPV by 1812 RMB/m2 and 1859 RMB/m2. This study demonstrates the excellent performance of the proposed devices and provides a new approach to energy-saving building envelopes.

TRNSYS modelling and feasibility study of natural gas absorption heat pump (GAHP) for Canadian homes

An investigation was conducted to explore the potential use of a Natural Gas Absorption Heat Pump (GAHP) for heating and cooling. This investigation involved experiments and simulations using TRNSYS software. In the experimental and modelling study, a working fluid comprising a solution of 50% Propylene Glycol (PG) and water was utilized to prevent freezing in the system’s primary loop, which is exposed to extreme cold weather conditions. The data from the experimental study was utilized to develop performance curves used in the system simulations. TRNSYS simulations were conducted to predict the performance behaviour of the system under different operating and climatic conditions. The results of the analysis indicate that the GAHP can be a substitute in areas where natural gas is the primary heating fuel. However, it was noted that the GAHP’s capacity, Gas Utilization Efficiency (GUE), and Coefficient of Performance (COP) were significantly lower during the heating and cooling seasons. It was observed that the heating GUE values ranged from 0.53 to 0.64, and cooling GUEs ranged from 0.32 to 0.38. These GUE values are significantly lower than anticipated for this technology per system specifications. Furthermore, the lower performance of the GAHP operation in Canada is attributed to extremely cold conditions, excessive cycling, and part-load performance. It was concluded that optimizing the control system is necessary to improve the practicality of GAHP in Canada.

Advanced eco-friendly power and cooling cogeneration-thermal energy storage utilizing phase change materials and chemisorption in renewable-based configurations

Increasing the reliability, stability, and safety of renewable energy systems depends on the integration of energy storage systems in order to balance energy production and demand. This research introduces an innovative system that combines a chemisorption unit, a phase change material (PCM)-based thermal energy storage (TES) mechanism, and a solar thermal unit with Linear Fresnel Reflectors (LFRs), tailored for residential usage. The system’s performance and dynamics are examined using TRNSYS and MATLAB software tools. Within this system, electricity is produced via a turbine propelled by the pressure differential created by chemical reactions within a chemisorption unit. Concurrently, cooling was facilitated through the ammonia evaporation process within an evaporator. At heat source temperatures between 100–200 °C, the system achieved a maximum electricity output of 2,718.9 W and a cooling rate of 14,601.5 W. The energy efficiency peaked at 46.32 %, and exergy efficiency at 40.78 %. The thermal energy storage component, with a volume of 1.5 m3, achieved a maximum storage capacity of 253.7 kWh. The study shows that higher heat source temperatures enhance production capacity but reduce the coefficient of performance (COP) for cooling by approximately 25 %. Overall, the system demonstrates significant potential for improving the efficiency and reliability of renewable energy systems.