Tritopic Ligands Research Articles

Designing External Pores of Aluminum Oxo Polyhedrons for Efficient Iodine Capture.

Although metal-organic polyhedra (MOPs) expansion has been studied to date, it is still a rare occurrence for their porous intermolecular assembly for iodine capture. The major limitation is the lack of programmable and controllable methods for effectively constructing and utilizing the exterior cavities. Herein, the goal of programmable porous intermolecular assembly is realized in the first family of aluminum oxo polyhedrons (AlOPs) using ligands with directional H-bonding donor/acceptor pairs and auxiliary alcohols as structural regulation sites. The approach has the advantage of avoiding the use of expensive edge-directed ditopic and face-directed tritopic ligands in the general synthesis strategy of MOPs. Combining theoretical calculations and experiments, the intrinsic relationship is revealed between alcohol ligands and the growth mechanism of AlOPs. The maximum I2 uptake based on the mass gain during sorption corresponds to 2.35gg-1, representing the highest reported I2 sorption by an MOP. In addition, it can be easily regenerated and maintained the iodine sorption capacity, revealing its further potential application. This method of constructing stable and programmable porous materials will provide a new way to solve problems such as radionuclide capture.

Exploring the hydrogen and methane storage capacities of novel DUT MOFs at room temperature: A Grand Canonical Monte Carlo simulation study

Metal-Organic Frameworks (MOFs) are a significant and promising category of solid that have garnered substantial attention for their potential in storing hydrogen and methane. Grand Canonical Monte Carlo (GCMC) simulations of the usable hydrogen and methane storage capacities of five DUT MOFs (Dresden University of Technology), based on tritopic ligands and copper, have been carried out at room temperature and pressures between 0.5 and 35 MPa. These DUT MOFs exhibit high usable hydrogen and methane storage capacities, comparable or higher than the storage capacities of the best classical MOFs and the best Cu-based MOFs. The usable methane gravimetric storage capacities at 35 MPa and room temperature of these DUTs reach the Department of Energy (DOE) methane gravimetric target and their usable volumetric capacities are close to the DOE methane volumetric target.

Redox Triggers Guest Release And Uptake Across A Series of Azopyridine-Based Metal-Organic Capsules.

Precise control over guest release and recapture using external stimuli is a valuable goal, potentially enabling new modes of chemical purification. Including redox moieties within the ligand cores of molecular capsules to trigger the release and uptake of guests has proved effective, but this technique is limited to certain capsules and guests. Herein, we demonstrated the construction of a series of novel metal-organic capsules from ditopic, tritopic and tetratopic ligands respectively, which contain redox-active azo groups coordinated to FeII centers. Compared to their iminopyridine-based analogs, this new class of azopyridine-based capsule possess larger cavities, capable of encapsulating more voluminous guests. Upon reduction of the capsules, their guests are released and may then be re-encapsulated when the capsules are regenerated by oxidation. Since the redox centers are on the ligand arms, they are modular and can be attached to a variety of ligand cores to afford varying and predictable architectures. Our method thus shows promise as a generalized approach for designing redox-controlled guest release and uptake systems. This article is protected by copyright. All rights reserved.

Construction of 1,3,5-Triazine-Based Prisms and Their Enhanced Solid-State Emissions.

In this study, two trigonal prisms based on the 1,3,5-triazine motif (SA and SB), distinguished by hydrophobic groups, were prepared by the self-assembly of tritopic terpyridine ligands and Zn(II) ions. SA and SB exhibited high luminescence efficiencies in the solid state, overcoming the fluorescence quenching of the 1,3,5-triazine group caused by π-π interactions. Notably, SA and SB exhibited different luminescence behaviors in the solution state and aggregation state. SB with 12 alkyl chains exhibited extremely weak fluorescence in a dilute solution, but its fluorescence intensity and photoluminescence quantum yield (PLQY) were significantly enhanced in the aggregated state (with the increase in the water fraction), especially in the solid state. Different from the gradually enhanced efficiency of SB, the PLQY of SA gradually decreased with the increase in aggregation but still maintained a high luminescence efficiency. These two complexes exhibited different modes to solve the fluorescence quenching of 1,3,5-triazine in the solid state. The hierarchical self-assembly of SB exhibited nanorods owing to the hydrophobic interactions of alky chains, while SA aggregated into spheres under the influence of π-π interactions.

A Double-Walled Tetrahedron with AgI 4 Vertices Binds Different Guests in Distinct Sites.

A double-walled tetrahedral metal-organic cage assembled in solution from silver(I), 2-formyl-1,8-naphthyridine, halide, and a threefold-symmetric triamine. The AgI 4 X clusters at its vertices each bring together six naphthyridine-imine moieties, leading to a structure in which eight tritopic ligands bridge four clusters in an (AgI 4 X)4 L8 arrangement. Four ligands form an inner set of tetrahedron walls that are surrounded by the outer four. The cage has significant interior volume, and was observed to bind anionic guests. The structure also possesses external binding clefts, located at the edges of the cage, which bound small aromatic guests. Halide ions bound to the silver clusters were observed to exchange in a well-defined hierarchy, allowing modulation of the cavity volume. The principles uncovered here may allow for increasingly more sophisticated cages with silver-cluster vertex architectures, with post-assembly tuning of the interior cavity volume enabling targeted binding behavior.

A Double‐Walled Tetrahedron with AgI4 Vertices Binds Different Guests in Distinct Sites**

AbstractA double‐walled tetrahedral metal‐organic cage assembled in solution from silver(I), 2‐formyl‐1,8‐naphthyridine, halide, and a threefold‐symmetric triamine. The AgI4X clusters at its vertices each bring together six naphthyridine‐imine moieties, leading to a structure in which eight tritopic ligands bridge four clusters in an (AgI4X)4L8 arrangement. Four ligands form an inner set of tetrahedron walls that are surrounded by the outer four. The cage has significant interior volume, and was observed to bind anionic guests. The structure also possesses external binding clefts, located at the edges of the cage, which bound small aromatic guests. Halide ions bound to the silver clusters were observed to exchange in a well‐defined hierarchy, allowing modulation of the cavity volume. The principles uncovered here may allow for increasingly more sophisticated cages with silver‐cluster vertex architectures, with post‐assembly tuning of the interior cavity volume enabling targeted binding behavior.

Expanded Ligands Based upon Iron(II) Coordination Compounds of Asymmetrical Bis(terpyridine) Domains.

The synthesis and characterization of two tritopic ligands containing a 2,2':6',2″-terpyridine (tpy) metal binding domain and either a 3,2':6',3″- or a 4,2':6',4″-tpy domain are detailed. The synthetic routes to these ligands involved the [Pd(dppf)Cl2]-catalyzed coupling of a boronic ester-functionalized 2,2':6',2″-tpy with bromo-derivatives of 3,2':6',3″-tpy or 4,2':6',4″-tpy. The 2,2':6',2″-tpy domains of the tritopic ligands preferentially bind Fe2+ in reactions with iron(II) salts leading to the formation of two homoleptic iron(II) complexes containing two peripheral 3,2':6',3″-tpy or 4,2':6',4″-tpy metal-binding sites, respectively. These iron(II) complexes are potentially tetratopic ligands and represent expanded versions of tetra(pyridin-4-yl)pyrazine.

Zirconium Metal-Organic Cages: Synthesis and Applications.

ConspectusFor the last two decades, materials scientists have contributed to a growing library of porous crystalline materials. These synthetic materials are typically extended networks, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), or discrete materials like metal-organic cages (MOCs) and porous organic cages (POCs). Advanced porous materials have shown promise for various applications due to their modular nature and structural tunability. MOCs have recently garnered attention because of their molecularity that bestows them with many unique possibilities (e.g., solution-processability, structural diversity, and postsynthetic processability).MOCs are discrete molecular assemblies of organic ligands coordinated with either metal cations or metal oxide clusters of different nuclearities, resulting in architectures with inherent porosity. Notably, the molecular nature of MOCs endows them with easy solution-processability unattainable with traditional framework materials. To date, a number of stable MOCs have been reported, such as those based on Rh (Rh-O bond energy: 405 ± 42 kJ/mol), Fe (Fe-O bond energy: 407.0 ± 1.0 kJ/mol), Cr (Cr-O bond energy: 461 ± 8.7 kJ/mol), Ti (Ti-O bond energy: 666.5 ± 5.6 kJ/mol), and Zr (Zr-O bond energy: 766.1 ± 10.6 kJ/mol). Paddle-wheel MOCs have also shown great stability in aqueous environments due to their rigid backbones. The zirconium MOC (Zr-MOCs) family emerges as a class of very robust cages for which their high bond energy endows them with high hydrothermal stability.In 2013, we reported the first four zirconocene tetrahedrons assembled from trinuclear zirconium oxide clusters with ditopic or tritopic organic ligands. Since then, significant progress in the rational design of Zr-MOC has led to an assortment of structures dedicated to meaningful applications.In this Account, we highlight the recent progress in synthesizing Zr-MOCs and Zr-MOC-based higher dimensional frameworks and their applications dedicated in our laboratories and beyond. The general Zr-MOC synthetic strategy involves assembling Zr trinuclear clusters with organic ligands (rigid or flexible) containing various functional groups. This chemistry has afforded cages with structural versatility and active sites, e.g., amino groups, for postsynthetic modifications (PSMs). Since the extrinsic porosity of cage-based frameworks is relatively weak, the resulting frameworks are susceptible to structural rearrangement after solvent removal. To circumvent this limitation, increasing the hydrogen bond ratio and strength between interlinked cages and conducting in situ catalytic polymerizations have been reported to afford permanently porous structures amenable to host-guest reactions.To expand their potential applications, multifunctional Zr-MOCs are highly desired. Such multivariate MOCs can be attained by either employing the isoreticular expansion strategy to create MOCs with high surface areas or using mixed-ligand approaches to afford heterogeneous MOCs. In addition, amorphous MOCs, flexible organic ligands, new functionalities, and MOC-based extended networks are exciting new approaches to developing materials with structural versatility and enhanced characteristics. Thereby, we believe the stability and versatility of the Zr-MOC family hold great potential in expanding and addressing challenging applications.

Synthesis of Novel Tritopic Hydrazone Ligands: Spectroscopy, Biological Activity, DFT, and Molecular Docking Studies.

Polytopic organic ligands with hydrazone moiety are at the forefront of new drug research among many others due to their unique and versatile functionality and ease of strategic ligand design. Quantum chemical calculations of these polyfunctional ligands can be carried out in silico to determine the thermodynamic parameters. In this study two new tritopic dihydrazide ligands, N’2, N’6-bis[(1E)-1-(thiophen-2-yl) ethylidene] pyridine-2,6-dicarbohydrazide (L1) and N’2, N’6-bis[(1E)-1-(1H-pyrrol-2-yl) ethylidene] pyridine-2,6-dicarbohydrazide (L2) were successfully prepared by the condensation reaction of pyridine-2,6-dicarboxylic hydrazide with 2-acetylthiophene and 2-acetylpyrrole. The FT-IR, 1H, and 13C NMR, as well as mass spectra of both L1 and L2, were recorded and analyzed. Quantum chemical calculations were performed at the DFT/B3LYP/cc-pvdz/6-311G+(d,p) level of theory to study the molecular geometry, vibrational frequencies, and thermodynamic properties including changes of ∆H, ∆S, and ∆G for both the ligands. The optimized vibrational frequency and (1H and 13C) NMR obtained by B3LYP/cc-pvdz/6-311G+(d,p) showed good agreement with experimental FT-IR and NMR data. Frontier molecular orbital (FMO) calculations were also conducted to find the HOMO, LUMO, and HOMO–LUMO gaps of the two synthesized compounds. To investigate the biological activities of the ligands, L1 and L2 were tested using in vitro bioassays against some Gram-negative and Gram-positive bacteria and fungus strains. In addition, molecular docking was used to study the molecular behavior of L1 and L2 against tyrosinase from Bacillus megaterium. The outcomes revealed that both L1 and L2 can suppress microbial growth of bacteria and fungi with variable potency. The antibacterial activity results demonstrated the compound L2 to be potentially effective against Bacillus megaterium with inhibition zones of 12 mm while the molecular docking study showed the binding energies for L1 and L2 to be −7.7 and −8.8 kcal mol−1, respectively, with tyrosinase from Bacillus megaterium.

Micropore Regulation in Ultrastable [Sc3O]-Organic Frameworks for Acetylene Storage and Purification.

High storage capacity, high separation selectivity, and high structure stability are essential for an idea gas adsorbent. However, it is not easy to achieve all three at the same time, even for the promising metal-organic framework (MOF) adsorbents. We demonstrate herein that robust [Sc3O]-organic frameworks could be regulated by a micropore combination strategy for high-performance acetylene adsorption. Under the same solvent system with formic acid as a modulator, similar tritopic ligands extend [Sc3O(COO)6] trigonal-prismatic clusters to generate SNNU-5-Sc and SNNU-150-Sc adsorbents. Notably, the two Sc-MOFs can keep their architectures over 24 h in water at different pH values (2-12) or at 90 °C. Modulated by the linker symmetry, the final stacking metal-organic polyhedral cages produce open window sizes of about 10 Å for SNNU-5-Sc and 5 Å + 7 Å for SNNU-150-Sc. Due to such micropore combinations, SNNU-5-Sc exhibits a top-level C2H2 uptake of 211.2 cm3 g-1 (1 atm and 273 K) and SNNU-150-Sc shows high C2H2/CH4, C2H2/C2H4, and C2H2/CO2 selectivities of 80.65, 4.03, and 8.19, respectively, under ambient conditions. Dynamic breakthrough curves obtained on a fixed-bed column and grand canonical Monte Carlo (GCMC) simulations further support their prominent acetylene storage and purification performance. High framework stability, storage capacity, and separation selectivity make SNNU-5-Sc and SNNU-150-Sc ideal acetylene adsorbents in practical applications.

Strong magnetic exchange coupling in a radical-bridged trinuclear nickel complex.

Reaction of 2,3,6,7,10,11-hexaaminotriphenylene hexahydrochloride (HATP·6HCl) and (TpPhNi)Cl (TpPh = tris(3,5-diphenyl-1-pyrazolyl)borate) produces the radical-bridged trinickel complex [(TpPhNi)3(HITP)] (HITP3-˙ = 2,3,6,7,10,11-hexaiminotriphenylene). Magnetic measurements and broken-symmetry density functional theory calculations reveal strong exchange coupling persisting at room temperature between HITP3-˙ and two of the three Ni2+ centers, a rare example of strong radical-mediated magnetic coupling in multimetallic complexes. These results demonstrate the potential of radical-bearing tritopic HITP ligands as building blocks for extended molecule-based magnetic materials.

Kinetically controlled narcissistic self-sorting of Pd(II)-linked self-assemblies from structurally similar tritopic ligands.

Herein, we present the narcissistic self-sorted state from two kinds of structurally similar tritopic ligands with a cis-protected Pd(II) complex, which was generated by both the pathway-dependent process and the proper choice of the leaving ligand. This metastable state could not be attained by simple mixing of all components by heating under thermodynamic control.

Luminometric dosimetry of X-ray radiation by a zwitterionic uranium coordination polymer.

A novel X-ray dosimeter based on a uranium coordination polymer U-Cbdcp was obtained by the judicious synergy between the luminescent uranyl centres and zwitterionic tritopic ligands. Notably, U-Cbdcp exhibits luminescence quenching upon increasing X-ray dose, which in combination with its excellent radiolytic stability, makes it suitable for X-ray dosimetry.

Multidimensional Mass Spectrometry Assisted Metallo-Supramolecular Chemistry

Multidimensional Mass Spectrometry Assisted Metallo-Supramolecular Chemistry

Precise Assembly and Supramolecular Catalysis of Tetragonal- and Trigonal-Elongated Octahedral Coordination Containers

The construction of distorted or irregular coordination polyhedrons with specific shapes and functionalities is highly challenging. Here, we demonstrate a viable strategy for attaining a severely d...

MLCT Excited-State Behavior of Trinuclear Ruthenium(II) 2,2'-Bipyridine Complexes.

Four trinuclear ruthenium(II) polypyridyl complexes were synthesized, and a detailed investigation of their excited-state properties was performed. The tritopic sexi-pyridine bridging ligands were obtained via para or meta substitution of a central 2,2'-bipyridine fragment. A para connection between the 2,2'-bipyridine chelating moieties of the bridging ligand led to a red-shifted MLCT absorption band in the visible part of the spectra, whereas the meta connection induced a broadening of the LC transitions in the UV region. A convergent energy transfer from the two peripheral metal centers to the central Ru(II) moiety was observed for all trinuclear complexes. These complexes were in thermal equilibrium with an upper-lying 3MLCT excited state over the investigated range of temperatures. For all complexes, deactivation via the 3MC excited state was absent at room temperature. Importantly, the connection in the para position for both central and peripheral 2,2'-bipyridines of the bridging ligand resulted in a trinuclear complex (Tpp) that absorbed more visible light, had a longer-lived excited state, and had a higher photoluminescence quantum yield than the parent [Ru(bpy)3]2+, despite its red-shifted photoluminescence. This behavior was attributed to the presence of a highly delocalized excited state for Tpp.

Pentanuclear Nickel(II) Complex with two Vertex‐Shared Triaminoguanidine Fragments and Symmetric Capping Ligand

The pentanuclear nickel(II) complex [Ni5(saltagBr)2(tptz)4] (Ni5) with the tritopic triaminoguanidine‐derived Schiff‐base ligand H5saltagBr (1,2,3‐tris[(5‐bromosalicylidene)amino]guanidine) and tptz (2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine) as capping ligands is reported. Ni5 crystallizes in the triclinic space group P1 with the central nickel(II) ion linking two triangular arrangements of nickel(II) ions supported by two tritopic triaminoguanidine ligands. The octahedral coordination of the four peripheral nickel(II) ions is complemented by capping tridentate tptz ligands. By variation of the synthesis also the corresponding trinuclear nickel(II) complex [Ni3(saltagBr)(tptz)3]NO3 (Ni3) is accessible. Magnetic measurements for Ni3 and Ni5 reveal a singlet ground state with antiferromagnetic coupling between the nickel(II) ions, which in the case of Ni5 can only be simulated assuming a two‐J exchange coupled spin topology. For both complexes significant zero‐field splitting for the nickel(II) ions is evident from the measured magnetic data, which can be verified by theoretical studies revealing a magnetic anisotropy with strong rhombic distortion due to the presence of the tptz co‐ligands in both compounds.

Dual-Branched Dense Hexagonal Fe(II)-Based Coordination Nanosheets with Red-to-Colorless Electrochromism and Durable Device Fabrication.

Highly dense hexagonal Fe(II)-based coordination nanosheets (CONASHs) were designed by dual-branching, at the metal-coordination moieties and the tritopic ligands, which successfully obtained a liquid/liquid interface by the complexation of Fe(II) ions and the tritopic bidentate ligands. The 1:1 complexation was confirmed by titration. The obtained Fe(II)-based nanosheets were fully characterized by small-angle X-ray scattering (SAXS), atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). A monolayer of the sheets was obtained, employing the Langmuir-Blodgett (LB) method, and the determined thickness was ∼2.5 nm. The polymer nanosheets exhibited red-to-colorless electrochromism because the electrochemical redox transformation between Fe(II) and Fe (III) ions controlled the appearance/disappearance of the metal (ion)-to-ligand charge-transfer (MLCT) absorption. The poor π-conjugation in the tritopic ligands contributed to the highly colorless electrochromic state. A solid-state device, with the robust polymer film, exhibited excellent electrochromic (EC) properties, with high optical contrast (ΔT > 65%) and high durability after repeated color changes for >15 000 cycles, upon applying low-operating voltages (+1.5/0 V).

Highly stable two-dimensional bismuth metal-organic frameworks for efficient electrochemical reduction of CO2

We report a unique 2D bismuth metal-organic framework (Bi-MOF) that possesses permanent accessible porosity for efficient electrochemical CO2 reduction (ECR) to HCOOH. The 2D open-framework structure with helical Bi-O rods bridged by tritopic carboxylate ligands exhibits a remarkable Faradaic efficiency for HCOOH formation over a broad potential window, reaching 92.2 % at ∼ –0.9 V (vs. reversible hydrogen electrode, RHE) with excellent durability over 30 h. The mass-specific HCOOH partial current density is up to 41.0 mA mgBi−1, exceeding 4 times higher than that of commercial Bi2O3 and Bi sheets at ∼ –1.1 V (vs. RHE). Operando and ex-situ X-ray absorption fine structure spectroscopy revealed a structural feature associated with Bi-MOF to preserve Bi(3+) during and after long-term ECR. Theoretical calculations further showed that the crystallographically channels with abundant Bi active sites in the MOF structure favor the formation of *HCOO while suppressing the side-reaction of hydrogen evolution, thereby leading to the high selectivity for HCOOH.

Face-Sharing Archimedean Solids Stacking for the Construction of Mixed-Ligand Metal-Organic Frameworks.

Reticular chemistry has been an important guiding principle for the design of metal-organic frameworks (MOFs). This approach utilizes discrete building units (molecules and clusters) that are connected through strong bonds into extended networks assisted by topological considerations. Although the simple design principle of connecting points and lines has proved successful, new design strategies are still needed to further explore the structures and functions of MOFs. Herein, we report the design and synthesis of two mixed-ligand MOFs, [(CH3)2NH2]4[Zn4O]4[Zn(TCPP)]5[BTB]8/3 (PCN-137) and [Zr6(μ3-O)4(μ3-OH)4][TCPP][TBTB]8/3 (PCN-138) (BTB = 1,3,5-benzene(tris)benzoate, TBTB = 4,4',4″-(2,4,6-trimethylbenzene-1,3,5-triyl)tribenzoate, and TCPP = tetrakis(4-carboxyphenyl)porphyrin) by the stacking of face-sharing Archimedean solids. In these two MOFs, high-symmetrical metal clusters serve as vertices, and tritopic or tetratopic carboxylate ligands function as triangular and square faces, leading to the formation of two kinds of Archimedean solids (rhombicuboctahedron and cuboctahedron). Furthermore, the ordered accumulation of Archimedean solids successfully gives rise to 3D structures through face-sharing, highlighting the polyhedron-based approach for the design and preparation of MOFs. In addition, PCN-138 was utilized as a heterogeneous catalyst toward CO2 photoreduction under visible-light irradiation. This structure shows high photocatalytic activity, which can be attributed to the coexistence of photosensitizing porphyrin fragments and Zr-oxo centers within the PCN-138 scaffold.