Acceptor Triplet Research Articles

Π‐Radical Photosensitizer for Highly Efficient and Stable Near‐Infrared Photon Upconversion

AbstractNear‐infrared (NIR)‐to‐blue triplet–triplet annihilation upconversion (TTA‐UC) exhibits substantial potential for diverse applications, encompassing photovoltaics, photocatalysis, bioimaging, and photodynamic therapy. A major challenge in this field, however, is attaining high upconversion quantum yields (ΦUC) without using transition metals as NIR photosensitizers. This research presents an innovative organic π‐radical photosensitizer (TTM‐TPA) featuring extended absorption in the NIR region (≈760 nm) that is capable of generating pronounced anti‐Stokes emissions when coupled with suitable triplet acceptors. By eliminating energy loss associated with intersystem crossing and promoting rapid doublet–triplet energy transfer processes, the binary TTM‐TPA/perylene system achieves ΦUC values of up to 6.8% and an anti‐Stokes shift of 0.93 eV. Notably, the TTA‐UC system demonstrates exceptional stability when subjected to intense 733 nm laser irradiation (4 W cm−2), maintaining nearly constant upconversion intensity after 4 h. These findings underscore the considerable potential of doublet‐sensitized TTA‐UC for a broad array of practical applications.

(Invited) Rational Design of Quantum Dot/Mediator Interfaces for Triplet Energy Transfer and Photon Upconversion

Photon upconversion, where two or more low energy photons are converted into one high energy photon, shows great potential in bioimaging, catalysis and solar energy conversion. Photon upconversion has traditionally been realized with lanthanide-doped nanoparticles, or organic dye sensitized triplet-triplet annihilation (TTA) based upconversion platforms. In recent years, QD sensitized triplet-triplet annihilation based upconversion systems have achieved impressive upconversion quantum efficiency and demonstrated many unique advantages, including high photostability, large extinction coefficient, high spectral coverage and tunability, and low singlet-triplet energy gap. In this talk, we discuss our recent work in developing and understanding QD/mediator interface for efficient QD-sensitized photon upconversion. We summarize the main results of time-resolved spectroscopic studies of various factors affecting the rate of triplet energy transfer (TET) from the QD to the surface attached mediator (TET1) and from the mediator to the emitter in solution (TET2). To identify the key design rules, we compare three PbS sensitized upconversion systems using three mediator molecules with the same tetracene triplet acceptor at different distances from the QD. Our results show that the mediator triplet state is mostly formed by direct TET from quantum dot. With increasing distance between the mediator and PbS QD, the efficiency of the TET1 from the QD to the mediator decreases due to a decrease in the rate of this triplet energy transfer step, while the efficiency of the TET2 from the mediator to emitter increases due to a reduction in the QD induced mediator triplet state decay (via the external heavy atom effect). The rate constant of TET2 is three orders of magnitude slower than the diffusion limited value. We show that the effect of QD/mediator on the total unconversion efficiency measured under CW illumination conditions can be well accounted for by the independently determined efficiencies of TET1 and TET2 steps, providing important insight on the design and rational improvement of efficient photon upconversion systems. Ongoing detailed mechanistic studies of the TET1 process shows that both QD bright and dark exciton states contribute to the TET process and higher lying bridge states play significant role in enhancing TET from core/shell QDs.

Triplet-Triplet Energy Transfer in Bis-Cyclometalated Iridium Complexes with Pyrene-Substituted Isocyanides.

Nonlinear optical (NLO) materials are able to modulate responses of electromagnetic radiation, leading to phenomena critical to modern telecommunications technologies. The last two decades have seen significant advances in the area of molecular nonlinear chromophores, particularly with respect to reverse-saturable absorption (RSA). Here, we introduce a strategy for intense excited-state absorption (ESA) that involves bis-cyclometalated iridium complexes with isocyanide ancillary ligands decorated with pyrene triplet acceptors. Upon excitation, the complexes undergo rapid triplet-triplet energy transfer (TTET) to the acceptor excited states. This report describes five bis-cyclometalated iridium complexes using two different pyrene-substituted isocyanides with the general formula [Ir(C^N)2(CNAr)2]PF6 (C^N = cyclometalating ligand, CNAr = isocyanide ancillary ligand: CNArpyr = 2,6-dimethyl-4-(1-pyrenyl)phenyl isocyanide, CNpyr = 1-pyrenyl isocyanide). The synthesized complexes were thoroughly characterized via 1H and 13C{1H} NMR spectroscopy, Fourier-transform Infrared spectroscopy, and electrospray ionization mass spectrometry. The excited states were evaluated with UV-vis absorption, steady-state and time-resolved photoluminescence, and transient absorption spectroscopy. Phosphorescence is completely quenched at room temperature, but in the solvent glass matrix at 77 K, there is luminescence originating from a π → π* triplet state on the pyrene moiety, abbreviated herein as 3pyrene. All five complexes display intense and long-lived ESA originating from the 3pyrene state. The localization of the ground-state absorption on the cyclometalating ligands and the excited-state absorption on the pyrene moiety allows for independent tuning of ground-state absorption (GSA) and ESA to optimize RSA and other NLO attributes.

Pyrene as a Triplet Acceptor Enhancing Triplet Energy Transfer of g-C3N4 in Heterogeneous Photooxidation

Triplet photosensitizers have great potential in selective photooxidation by generating 1O2 through triplet energy transfer. However, the heterogeneous bulk photosensitizers easily trap triplet excitons and inhibit photocatalysis efficiency. Previous work focused on controlling ultra-small size to reduce the transfer distance, but we propose a new strategy using triplet acceptor molecules (e.g., pyrenecarboxylic acid, PCA) with proper energy levels to modify the surface of heterogeneous photosensitizers (e.g., g-C3N4), facilitate the transfer of triplet excitons from the interior to the surface of the catalyst, and enhance catalytic reactions on its surface. In the photooxidation reaction of uric acid (UA), the conversion of UA catalyzed by pg-C3N4/PCA can reach 91.3% at 60 min, higher than that without modification (24.0%). DFT calculations and spectroscopic characterization show that the triplet acceptor in pg-C3N4/PCA could reduce the ΔEST value and grab triplet excitons in g-C3N4, thereby enhancing the 1O2 generation. This work provides another approach for high-efficiency utilization of heterogeneous triplet photosensitizers in wide applications.

A Surface Engineering Approach for Promoting Dexter Energy Transfer from Lead Halide Perovskite Nanocrystals

Efficient Dexter energy transfer from colloidal semiconductor nanocrystals lays the foundation for applications like photocatalysis and photon upconversion. We design a two-step functionalization strategy based on aromatic zwitterionic anchoring motifs to fix molecular triplet acceptors to the surface of CsPbBr3 perovskite nanocrystal (PNC), which increases the energy transfer rate by 120-fold. The binding condition of triplet acceptors and the influence on energy transfer during each surface treatment step are illustrated using steady-state and time-resolved optical spectroscopies and NMR. The results show that this new strategy can preclude competitive adsorption from residual synthetic ligands and achieve stable anchoring for triplet acceptors. Compared to acceptors that undergo rapid exchange on and off the dynamic PNC surface, the fixation significantly strengthens the electronic coupling with the PNC and hence promotes the Dexter energy transfer. Our strategy can be extended for quantitatively grafting other functional groups that require strong electronic coupling with lead halide perovskite surface.

Triplet generation at the CdTe quantum dot/anthracene interface mediated by hot and thermalized electron exchange for enhanced production of singlet oxygen.

Triplet energy transfer (TET) from semiconductor quantum dots (QDs) to molecular triplets has potential applications in photon up-conversion and singlet oxygen generation. Here, we have constructed a complex consisting of CdTe QDs as the donor and 9-anthracenecarboxylic acid (ACA) as the triplet acceptor, and studied the TET pathways and enhanced singlet oxygen generation properties. The results from steady-state and time-resolved spectroscopy demonstrate efficient TET with a total efficiency of over 80% from photoexcited CdTe QDs to ACA. Dynamical analysis clearly indicates two distinctive TET channels - hot electron exchange and thermalized electron exchange - mediating the TET process in the CdTe QDs-ACA complex. The TET efficiencies from hot electron exchange at high energetic levels and thermalized electron exchange on the lowest exciton state can reach ∼27% and ∼85%, respectively, following 530 nm excitation. This efficient TET endows the CdTe QDs-ACA complex with a good capability of generating singlet oxygen species with a yield of up to ∼59%. These findings contribute further insights to the mechanisms of interfacial TET processes and are significant in designing efficient TET systems based on semiconductor nanoparticles and triplet molecules.

Triplet quenching pathway control with molecular dyads enables the identification of a highly oxidizing annihilator class.

Metal complex - arene dyads typically act as more potent triplet energy donors compared to their parent metal complexes, which is frequently exploited for increasing the efficiencies of energy transfer applications. Using unexplored dicationic phosphonium-bridged ladder stilbenes (P-X2+) as quenchers, we exclusively observed photoinduced electron transfer photochemistry with commercial organic photosensitizers and photoactive metal complexes. In contrast, the corresponding pyrene dyads of the tested ruthenium complexes with the very same metal complex units efficiently sensitize the P-X2+ triplets. The long-lived and comparatively redox-inert pyrene donor triplet in the dyads thus provides an efficient access to acceptor triplet states that are otherwise very tricky to obtain. This dyad-enabled control over the quenching pathway allowed us to explore the P-X2+ photochemistry in detail using laser flash photolysis. The P-X2+ triplet undergoes annihilation producing the corresponding excited singlet, which is an extremely strong oxidant (+2.3 V vs. NHE) as demonstrated by halide quenching experiments. This behavior was observed for three P2+ derivatives allowing us to add a novel basic structure to the very limited number of annihilators for sensitized triplet-triplet annihilation in neat water.

Truxene-linked di-coumarin-mono-corrole tetrad: Synthesis, photophysical properties and application in Triplet−Triplet annihilation upconversion

Triplet−triplet annihilation upconversion (TTA-UC) has drawn widespread interest because of its great potential applications. However, it is still a challenge to design and synthesize efficient triplet photosensitizers without heavy atoms for TTA-UC. In this work, a triplet photosensitizer tetrad 2C-T-Cor based on two coumarin moieties and one corrole moiety with a truxene as the bridge was synthesized and used in TTA-UC as a novel heavy atom-free organic photosensitizer (perylene bisimide (PBI) was used as triplet acceptor). The photophysical properties were investigated by means of steady-state UV–Vis absorption and fluorescence spectroscopy, nanosecond time-resolved transient absorption spectroscopy, three-dimensional excitation emission matrix fluorescence spectra, and cyclic voltammetry. With photo-excitation of the coumarin unit at 420 nm, the intramolecular singlet–singlet energy transfer takes place from the coumarin moiety to the corrole unit with a transfer efficiency of 63.9%. Electrochemical study indicated that the intramolecular electron transfer was thermodynamically prohibited in toluene owing to the positive ΔGCS for charge-separation. A triplet excited state was investigated for 2C-T-Co via nanosecond time-resolved transient absorption and the triplet lifetime is 118 μs. 2C-T-Co can act as the triplet photosensitizer for the application of TTA-UC, and the upconversion quantum yield of 0.98% was observed.

Unambiguous spectral characterization on triplet energy transfer from quantum dots mediated by hole transfer competing with other carrier dynamics.

Triplet generation by quantum dots (QDs)-sensitized molecules emerges great potential in many applications. However, the mechanism of triplet energy transfer (TET) is still fuzzy especially due to the complicated energy level alignment of QDs and molecules or trap states in QDs. Here, CdSe QDs and 5-tetracene carboxylic acid (TCA) molecules are selected as the triplet donor and acceptor, respectively, to form a TET system. By tuning the band gap of CdSe, the CdSe-TCA complex is exactly designed to present a Type-II like alignment of relative energetics. Coupling the transient absorption and time-resolved fluorescence spectra, all carrier dynamics is distinctly elucidated. Quantitative analysis demonstrates that hole transfer persisting for ∼ 2 ps outcompetes all other carrier dynamics such as electron trapping (∼100 ps level), charge recombination (∼ 5 ns) and the so-called "back transfer charge recombination" (∼50 ns), and thus leads to a hole-transfer-mediated TET process. The low TET yield (∼34.0%) ascribed to electron behavior can be further improved if electron trapping and charge recombination are efficiently suppressed. The observation on distinguishable carrier dynamics attributed to legitimate design of energy level alignment facilitates a better understanding of the TET mechanism from QDs to molecules as well as further development of photoelectronic devices based on such TET systems.

(Keynote) Rational Design of Quantum Dot/Mediator Interfaces for Triplet Energy Transfer and Photon Upconversion

Photon upconversion, where two or more low energy photons are converted into one high energy photon, shows great potential in bioimaging, catalysis and solar energy conversion. Photon upconversion has traditionally been realized with lanthanide-doped nanoparticles, or organic dye sensitized triplet-triplet annihilation (TTA) based upconversion platforms. In recent years, QD sensitized triplet-triplet annihilation based upconversion systems have achieved impressive upconversion quantum efficiency and demonstrated many unique advantages, including high photostability, large extinction coefficient, high spectral coverage and tunability, and low singlet-triplet energy gap. In this talk, we discuss our recent work in developing and understanding QD/mediator interface for efficient QD-sensitized photon upconversion. We summarize the main results of time-resolved spectroscopic studies of various factors affecting the rate of triplet energy transfer (TET) from the QD to the surface attached mediator (TET1) and from the mediator to the emitter in solution (TET2). To identify the key design rules, we compare three PbS sensitized upconversion systems using three mediator molecules with the same tetracene triplet acceptor at different distances from the QD. Our results show that the mediator triplet state is mostly formed by direct TET from quantum dot. With increasing distance between the mediator and PbS QD, the efficiency of the TET1 from the QD to the mediator decreases due to a decrease in the rate of this triplet energy transfer step, while the efficiency of the TET2 from the mediator to emitter increases due to a reduction in the QD induced mediator triplet state decay (via the external heavy atom effect). The rate constant of TET2 is three orders of magnitude slower than the diffusion limited value. We show that the effect of QD/mediator on the total unconversion efficiency measured under CW illumination conditions can be well accounted for by the independently determined efficiencies of TET1 and TET2 steps, providing important insight on the design and rational improvement of efficient photon upconversion systems. Ongoing detailed mechanistic studies of the TET1 process shows that both QD bright and dark exciton states contribute to the TET process and higher lying bridge states play significant role in enhancing TET from core/shell QDs.

Energy‐Transfer Photocatalysis Using Lead Halide Perovskite Nanocrystals: Sensitizing Molecular Isomerization and Cycloaddition

AbstractA relatively new addition to the application portfolio of lead halide perovskites is to photosensitize molecular triplets for a variety of photochemical applications. Here we report visible‐light‐driven isomerization and cycloaddition of organic molecules sensitized by spectrally‐tunable perovskite nanocrystals. We first demonstrate with stilbene as the substrate molecule that photoisomerization can proceed efficiently and rapidly by either directly grafting carboxylated stilbene onto nanocrystal surfaces or using triplet–acceptor ligands as the energy relay. The relay approach is more generally applicable as it does not require anchoring‐group functionalization of substrate molecules, allowing us to facilely extend it to isomerization of a series of substituted stilbene molecules and ring‐closing isomerization of diarylethene, as well as intermolecular [2+2] cycloaddition of acenaphthylene. This study opens an avenue of energy‐transfer photocatalysis using perovskite nanocrystals.

Energy‐Transfer Photocatalysis Using Lead Halide Perovskite Nanocrystals: Sensitizing Molecular Isomerization and Cycloaddition

A relatively new addition to the application portfolio of lead halide perovskites is to photosensitize molecular triplets for a variety of photochemical applications. Here we report visible-light-driven isomerization and cycloaddition of organic molecules sensitized by spectrally-tunable perovskite nanocrystals. We first demonstrate with stilbene as the substrate molecule that photoisomerization can proceed efficiently and rapidly by either directly grafting carboxylated stilbene onto nanocrystal surfaces or using triplet-acceptor ligands as the energy relay. The relay approach is more generally applicable as it does not require anchoring-group functionalization of substrate molecules, allowing us to facilely extend it to isomerization of a series of substituted stilbene molecules and ring-closing isomerization of diarylethene, as well as intermolecular [2+2] cycloaddition of acenaphthylene. This study opens an avenue of energy-transfer photocatalysis using perovskite nanocrystals.

Bright State Sensitized Triplet Energy Transfer from Quantum Dot to Molecular Acceptor Revealed by Temperature Dependent Energy Transfer Dynamics.

Quantum dot (QD) sensitized molecular triplet excited state generation has been a promising alternative for traditional triplet state harvesting schemes. However, the correlation between QD bright/dark states and QD sensitized triplet energy transfer (TET) has been unclear. Herein, we studied the bright/dark states contribution to TET with CdSe/CdS core/shell QD-oligothiophene as the model system. Equilibrium between QD bright and dark states was tuned by changing temperature, and TET dynamics were monitored with transient absorption spectroscopy. Analysis of acceptor triplet excited state growth kinetics yields rates of TET from bright and dark states as 0.492 ± 0.011 ns-1 and 0.0271 ± 0.0014 ns-1 at 5 K, suggesting significant contribution of bright states to TET. The result was rationalized by bright state wave function components with the same electron/hole spin projections leading to nonzero TET probability. The study provides new insights into QD sensitized TET mechanisms and inspiration for future TET efficiency optimization through QD exciton engineering.

Harvesting the Triplet Excitons of Quasi-Two-Dimensional Perovskite toward Highly Efficient White Light-Emitting Diodes

Utilization of triplet excitons, which generally emit poorly, is always fundamental to realize highly efficient organic light-emitting diodes (LEDs). While triplet harvest and energy transfer via electron exchange between triplet donor and acceptor are fully understood in doped organic phosphorescence and delayed fluorescence systems, the utilization and energy transfer of triplet excitons in quasi-two-dimensional (quasi-2D) perovskite are still ambiguous. Here, we use an orange-phosphorescence-emitting ultrathin organic layer to probe triplet behavior in the sky-blue-emitting quasi-2D perovskite. The delicate white LED architecture enables a carefully tailored Dexter-like energy-transfer mode that largely harvests the triplet excitons in quasi-2D perovskite. Our white organic-inorganic LEDs achieve maximum forward-viewing external quantum efficiency of 8.6% and luminance over 15 000 cd m-2, exhibiting a significant efficiency enhancement versus the corresponding sky-blue perovskite LED (4.6%). The efficient management of energy transfer between excitons in quasi-2D perovskite and Frenkel excitons in the organic layer opens the door to fully utilizing excitons for white organic-inorganic LEDs.

Singlet–triplet splitting energy management for thermally activated delayed fluorescence emitters: up-conversion of acceptor triplet into charge transfer singlet state

Energetic proximity between charge transfer singlet (1CT) and a local exciton triplet (3LE) is critical to facilitate reverse intersystem crossing rate and thus ultimately TADF.

Efficient Triplet-Triplet Annihilation Upconversion in Solution and Hydrogel Enabled by an S-T Absorption Os(II) Complex Dyad with an Elongated Triplet Lifetime.

A new Os(II) complex dyad featuring direct singlet-to-triplet (S-T) absorption and intramolecular triplet energy transfer (ITET) with lifetime up to 7.0 μs was designed to enhance triplet energy transfer efficiency during triplet-triplet annihilation upconversion (TTA-UC). By pairing with 9,10-bis(phenylethynyl)anthracene (BPEA) as a triplet acceptor, intense upconverted green emission in deaerated solution was observed with unprecedented TTA-UC emission efficiency up to 26.3% (with a theoretical maximum efficiency of 100%) under photoexcitation in the first biological transparency window (650-900 nm). Meanwhile, a 7.1% TTA-UC emission efficiency was acquired in an air-saturated hydrogel containing the photosensitizer and a newly designed hydrophilic BPEA derivative. This ITET mechanism would inspire further development of a highly efficient TTA-UC system for biological fields and renewable energy production.

Enhancing the Photovoltaic Performance of Triplet Acceptors Enabled by Side‐Chain Engineering

Triplet excitons have both longer lifetimes and diffusion lengths than singlet excitons due to the nature of triplet excitons, which is expected to increase the photocurrent and further improve the performance of organic solar cells (OSCs). However, the working mechanism of triplet excitons in OSCs is not clearly clarified. Therefore, it is urgent to develop new triplet acceptors for in‐depth understanding. Herein, a series of acceptors (BTn‐4Cl) are synthesized by fine‐tuning of the side‐chain branch positions. The generation of triplet excitons of BTn‐4Cl is confirmed by the time‐resolved photoluminescence (TRPL) spectra, magnetophotocurrent (MPC) experiment, and electron paramagnetic resonance (EPR) spectra. The effects of side‐chain engineering on the optoelectronic properties, packing behaviors, energy losses, charge transport properties, spin lifetimes of triplet polarons, and blend film morphologies are systematically studied. These results show that D18:BT3‐4Cl‐based OSCs possess the best power conversion efficiency (PCE) of 17.31% due to lower energy losses, less recombination losses, more balanced charge carrier mobilities, longer spin–lattice (T1) relaxation time, and more favorable morphology. This work enhances the understanding of the structure–property relationship for high‐performance triplet acceptors.

Entropy-Gated Thermally Activated Delayed Emission Lifetime in Phenanthrene-Functionalized CsPbBr3 Perovskite Nanocrystals.

Charge and electronic energy transfer form the basis of many natural and artificial energy transduction systems. The energy landscapes that drive these transfer processes are often constructed from enthalpy changes. In contrast, the entropic effect, although occasionally invoked to explain some excited-state dynamics, has rarely been used to actively control charge/energy flow. Here we derive a generic formula describing how entropy can quantitatively gate the thermally activated delayed emission lifetime in semiconductor nanocrystal-molecular triplet acceptor complexes and experimentally verify the model using highly emissive, quantum-confined CsPbBr3 nanocrystals surface-functionalized with multiple phenanthrene triplet acceptors. Triplet energy transfer from photoexcited CsPbBr3 nanocrystals to phenanthrene is followed by thermally activated repopulation of nanocrystal excitons, leading to delayed nanocrystal emission. The lifetime of delayed emission increases with the phenanthrene/nanocrystal ratio, due to lowering of the free energy of the acceptor state by entropic gain. This study points toward a direction of using entropy to artificially design donor-acceptor light-emitting materials with predetermined excited-state lifetimes.

(Invited) Rational Design of Quantum Dot/Mediator Interfaces for Efficient Triplet- Annihilation-Based Photon Upconversion Systems

Photon upconversion, where two or more low energy photons are converted into one high energy photon, shows great potential in bioimaging, catalysis and solar energy conversion. Photon upconversion has traditionally been realized with lanthanide-doped nanoparticles, or organic dye sensitized triplet-triplet annihilation (TTA) based upconversion platforms. In recent years, QD sensitized triplet-triplet annihilation based upconversion systems have achieved impressive upconversion quantum efficiency and demonstrated many unique advantages, including high photostability, large extinction coefficient, high spectral coverage and tunability, and low singlet-triplet energy gap. In this talk, we discuss our recent work in developing and understanding QD/mediator interface for efficient QD-sensitized photon upconversion. We summarize the main results of time-resolved spectroscopic studies of various factors affecting the rate of triplet energy transfer (TET) from the QD to the surface attached mediator (TET1) and from the mediator to the emitter in solution (TET2). To identify the key design rules, we compare three PbS sensitized upconversion systems using three mediator molecules with the same tetracene triplet acceptor at different distances from the QD. Our results show that the mediator triplet state is mostly formed by direct TET from quantum dot. With increasing distance between the mediator and PbS QD, the efficiency of the TET1 from the QD to the mediator decreases due to a decrease in the rate of this triplet energy transfer step, while the efficiency of the TET2 from the mediator to emitter increases due to a reduction in the QD induced mediator triplet state decay (via the external heavy atom effect). The rate constant of TET2 is three orders of magnitude slower than the diffusion limited value. We show that the effect of QD/mediator on the total unconversion efficiency measured under CW illumination conditions can be well accounted for by the independently determined efficiencies of TET1 and TET2 steps, providing important insight on the design and rational improvement of efficient photon upconversion systems.

Interlayer Triplet Energy Transfer in Dion-Jacobson Two-Dimensional Lead Halide Perovskites Containing Naphthalene Diammonium Cations.

Recently, hybrid perovskites have gained attention as sensitizers for molecular triplet generation. Layered, two-dimensional (2D) perovskites are especially well-suited for this purpose because the triplet donor (inorganic framework) and triplet acceptor (organic layer) are self-assembled into adjacent sheets, so that with the appropriate energetics, triplets can be driven across the interface. Here we examine interlayer energy transfer in a series of mixed-halide Dion-Jacobson 2D perovskites containing divalent naphthalene cations. We find that the sensitized phosphorescence in these compounds is dominated by naphthalene triplet excimer emission, but when the inorganic exciton is tuned near resonance with the naphthalene triplet, naphthalene monomer phosphorescence competes with triplet excimer formation. The interlayer energy-transfer process is further revealed by ultrafast transient absorption spectroscopy through kinetic variations in triplet excimer formation times. Ultimately, gaining control over interlayer interactions in 2D perovskites through cation design will help uncover new functions and applications for these materials.