Triarylamine Donor Research Articles

Construction of Blue Thermally Activated Delayed Fluorescence Materials Based on the Heptagonal Triarylamine Donor

Construction of Blue Thermally Activated Delayed Fluorescence Materials Based on the Heptagonal Triarylamine Donor

Synthesis of π-Conjugated Chiral Aza/Boracyclophanes with a meta and para Substitution.

We herein describe the synthesis of a new class of axially chiral aza/boracyclophanes (BDN1, BXN1, BDB1 and BXB1) using binaphthyls as chiral building blocks and the main-group (B/N) chemistry with tunable electronic effects. All macrocycles substituted with triarylamine donors or triarylborane acceptors are strongly luminescent. These macrocycles showed two distinct meta and para π-conjugation pathways, leading to the formation of quasi figure-of-eight and square-shaped conformations. Interestingly, comparison of such structural models revealed that the former type of macrocycles BXN1 and BXB1 gave higher racemization barriers relative to the other ones. The results reported here may provide a new approach to engineer the optical stability of π-conjugated chiral macrocycles by controlling π-substitution patterns. The ring constraints induced by macrocyclization were also demonstrated to contribute to the configurational persistence as compared with the open-chain analogues p-BTT and m-BTT.

Novel Fluorescent Tetrahedral Zinc (II) Complexes Derived from 4-Phenyl-1-octyl-1H-imidazole Fused with Aryl-9H-Carbazole and Triarylamine Donor Units: Synthesis, Crystal Structures, and Photophysical Properties.

We present here the design, synthesis, and photophysical properties of two novel fluorescent zinc (II) complexes, ZnCl2(ImL1)2 and ZnCl2(ImL2)2, containing 4-(1-octyl-1H-imidazol-4-yl)-N,N-diphenyl-[1,1-biphenyl]-4-yl)-4-amine ImL1 and 9-(4-(1-octyl-1H-imidazol-4-yl)-[1,1-biphenyl]-4-yl)-9H-carbazole ImL2 ligands. The newly synthesized free ligands and their zinc (II) complexes were characterized using several spectroscopic techniques; their structures were identified by single-crystal X-ray diffraction; and their photophysical properties have been studied in the context of their chemical structure. The ZnCl2(ImL1)2 and ZnCl2(ImL2)2 complexes showed good thermal stability at 341 °C and 365 °C, respectively. Photophysical properties, including UV-Vis absorption spectra in ethanol solution and photoluminescence (PL) in both solid state and ethanol solution, were determined. UV-Vis adsorption data indicated that both free ligands had similar UV-Vis absorption properties, while their Zn (II) complexes had distinctive absorption characteristics. The fluorescence spectra show that both ligands and their corresponding Zn (II) complexes emit violet to cyan luminescence in the solid state at room temperature, while in ethanol solution at the same temperature, they exhibit efficient photoluminescence properties in the UV-A emission spectral region. Because of these photophysical properties, the synthesized ligands and their cognate Zn (II) complexes can be used as scaffolds for the potential development of optoelectronic materials.

A dual-locked triarylamine donor enables high-performance deep-red/NIR thermally activated delayed fluorescence organic light-emitting diodes.

Deep-red/near-infrared (DR/NIR) organic light-emitting diodes (OLEDs) have attracted a great deal of attention due to their widespread application fields, such as night-vision devices, optical communication, and information-secured displays. However, most DR/NIR OLEDs show low electroluminescence efficiencies, hampering their applications. Herein, we constructed a high-performance DR/NIR thermally activated delayed fluorescence (TADF) emitter based on an advanced dual-locked triarylamine donor (D) unit. Promisingly, such a novel D segment brings numerous advantages: a larger stereoscopic architecture, an enhanced electron-donating ability, and a stiffer molecular structure. In view of these features, the newly developed emitter DCN-DSP shows redshifted emission, a narrowed ΔEST, an enhanced PLQY value and aggregation-induced emission (AIE) properties, which allows for effectively alleviating concentration quenching compared to the control compound using a conventional triarylamine derivative as D units. The DCN-DSP-based OLEDs with modulated doping concentrations exhibit champion EQEs of 36.2% at 660 nm, 26.1% at 676 nm and 21.3% at 716 nm, which are record-high efficiencies among all TADF OLEDs in the similar emission ranges. This work realizes the efficiency breakthrough of DR/NIR TADF OLEDs, and such a promising molecular design approach may inspire even better DR/NIR TADF emitters in the future.

Adamantyl Side Chains as Anti-Aggregating Moieties in Dyes for Dye-Sensitized Solar Cells.

Designing and evaluating novel dye concepts is crucial for the development of the field of dye‐sensitized solar cells (DSSCs). In our recent report, the novel concept of tethering the anti‐aggregation additive chenodeoxycholic acid (CDCA) to dyes for DSSC was introduced. Based on the performance improvements seen for this modification, the aim of this study is to see if a simplified anti‐aggregation unit could achieve similar results. The following study reports the synthesis and photovoltaic characterization of two novel dyes decorated with the steric ethyladamantyl moiety on the π‐spacer, and on the triarylamine donor. This modification is demonstrated to be successful in increasing the photovoltages in devices employing copper‐based electrolytes compared to the non‐modified reference dye. The best photovoltaic performance is achieved by a device prepared with the adamantyl decorated donor dye and CDCA, this device achieves a power conversion efficiency of 6.1 % (Short‐circuit current=8.3 mA cm−2, Open‐circuit voltage=1054 mV, Fill factor=0.69). The improved photovoltaic performance seen for the adamantyl decorated donor demonstrate the potential of ethyladamantyl side chains as a tool to ensure surface protection of TiO2.

Synthetic Efforts to Investigate the Effect of Planarizing the Triarylamine Geometry in Dyes for Dye-Sensitized Solar Cells.

The geometry of a dye for dye-sensitized solar cells (DSSCs) has a major impact on its optical and electronic properties. The dye structure also dictates the packing properties and how well the dye insulates the metal–oxide surface from oxidants in the electrolyte. The aim of this work is to investigate the effect of planarizing the geometry of the common triarylamine donor, frequently used in dyes for DSSC. Five novel dyes were designed and prepared; two employ conventional triarylamine donors with thiophene and furan π-spacers, two dyes have had their donors planarized through one sulfur bridge (making two distinct phenothiazine motifs), and the final dye has been planarized by forming a double phenoxazine. The synthesis of these model dyes proved to be quite challenging, and each required specially designed total syntheses. We demonstrate that the planarization of the triarylamine donor can have different effects. When planarization was achieved by a 3,7-phenothiazine and double phenoxazine structures, improved absorption properties were noted, and a panchromatic absorption was achieved by the latter. However, an incorrect linking of donor and acceptor moieties has the opposite effect. Further, electrochemical impedance spectroscopy revealed clear differences in charge recombination depending on the structure of the dye. A drawback of planarized dyes in relation to DSSC is their low oxidation potentials. The best photovoltaic performance was achieved by 3,7-phenothazine with furan as a π-spacer, which produces a power conversion efficiency of 5.2% (Jsc = 8.8 mA cm–2, Voc = 838 mV, FF = 0.70).

Molecular Engineering of Robust Starburst-Based Organic Photosensitizers for Highly Efficient Photocatalytic Hydrogen Generation from Water

Six donor–donor−π–acceptor (D–D−π–A) triphenylamine-based starburst organic dyes with different electron-donating moieties and thiophene-based π-linkers were synthesized and characterized. Their photophysical and electrochemical properties, together with their photocatalytic hydrogen evolution performance as photosensitizers (PSs), were investigated. Distinctive and prolonged hydrogen evolution performances of these PSs under visible-light irradiation from water in their platinized TiO2 composites were demonstrated: a turnover number (TON) of up to 24 900 (252 h) with 1560 μmol (37.6 mL) hydrogen produced, an initial turnover frequency (TOFi) of 1130 h–1, initial activity (Activityi) of 705 mmol g–1 h–1, and initial apparent quantum yield (AQYi) of 12.1%. To the best of our knowledge, according to the TOF and TON values, the designed PS system is one of the most efficient and robust photocatalytic H2 generation systems adopting a TiO2-anchoring molecular PS in the literature. The results showed that the starburst triarylamine donor moiety with phenothiazine functionality and the alkyl chain on the thiophene π-linker could boost the performance and longevity of the photocatalytic system, providing a powerful strategy for the development of starburst-based highly efficient and robust D–D−π–A organic photosensitizers in the future.

Dual-Functional Enantiomeric Compounds as Hole-Transporting Materials and Interfacial Layers in Perovskite Solar Cells.

In this paper, we describe the application of the enantiomeric compounds YLC-1-YLC-4, each featuring a bulky spiro[fluorene-9,9'-phenanthren]-10'-one moiety, as both hole-transporting materials (HTMs) and interfacial layers in both n-i-p and p-i-n perovskite solar cells (PSCs). These HTMs contain an enantiomeric mixture and a variety of core units linked to triarylamine donors to extend the degree of π-conjugation. The n-i-p PSCs incorporating YLC-1(a) exhibited a power conversion efficiency (PCE) of 19.15% under AM 1.5G conditions (100 mW cm-2); this value was comparable with that obtained using spiro-OMeTAD as the HTM (18.25%). We obtained efficient and stable p-i-n PSCs having the dopant-free structure indium tin oxide (ITO)/NiOx/interfacial layer (YLC)/perovskite/PC61BM/BCP/Ag. The presence of the spiro-based compounds YLC-1 and YLC-2 efficiently passivated the interfacial and grain boundary defects of the perovskite and enhanced the sizes of its grains, more so than did YLC-3 and YLC-4. These spiro-based YLC derivatives packed densely and functioned as Lewis bases to coordinate Pb and Ni ions in the perovskite and NiOx layers, respectively. Together, the effects of smaller grain boundaries and defect passivation of the perovskite enhanced the optoelectronic properties of the PSCs. The photoinduced charge carrier extraction in the linearly increasing voltage (photo-CELIV) curves of NiOx/YLC-1(a) showed the faster carrier transport 3.3 × 10-3 cm2 V-1 s-1, which improved the carrier mobility, supporting the notion of defect passivation of the perovskite. The best-performing NiOx/YLC-1(a) device provided a short-circuit current density (JSC) of 22.88 mA cm-2, an open-circuit voltage (VOC) of 1.10 V, and a fill factor (FF) of 80.93%, corresponding to an overall PCE of 20.37%. In addition, the PCEs of the NiOx/YLC-1(a) and NiOx/YLC-4(b) PSC devices underwent decays of only 98.1 and 97.0% of their original values after 41 days under an Ar atmosphere. Thus, these YLC derivatives passivated the NiOx surface and optimized the film quality of perovskites, thereby leading to superior PCEs of their respective PSCs.

Electrochemical and Spectroscopic Studies on Triarylamine‐Polychlorotriphenylmethyl Dyads with Particularly Strong Triarylamine Donors

AbstractWe present two new donor‐acceptor dyads composed of a polychlorotriphenylmethyl radical (PTM.) as the acceptor (A) and bis(4‐dimethylaminophenyl)(phenyl)amine (TPAN) or 2,2’:6’,2’’:6’’,6‐trioxytriphenylamine (TOTA) as particularly electron‐rich triarylamine (TAA) donors (D). We assessed their electrochemical properties and electronic structures by cyclic voltammetry, UV/vis/NIR spectroscopy, EPR spectroscopy and quantum chemical calculations. By establishing the spectroscopic fingerprints of the oxidized and reduced forms, we probe for the possible coexistence of a zwitterionic TAA+‐PTM− valence tautomer (VT), besides neutral TAA‐PTM.. UV/vis/NIR and EPR spectroscopic studies at variable temperature and in various solvents however provide no indication for such equilibria. Quantitative spin counting experiments by EPR spectroscopy and quantum chemical calculations indicate that the one‐electron oxidized forms of these dyads possess an open‐shell singlet ground state which is energetically slightly below the triplet state

Donor‐Acceptor‐Donor Thienopyrazine‐Based Dyes as NIR‐Emitting AIEgens

AbstractOrganic Near‐Infrared luminophores have found broad application as functional materials, but the development of efficient NIR emitters is still a challenging goal. Here we report on a new class of thieno[3,4‐b]pyrazine‐based NIR emitting materials with Aggregation Induced Emission (AIE) properties. The dyes feature a donor–acceptor–donor (D−A−D) structure, with a thienopyrazine acceptor core connected to two triarylamine donor groups bearing a tetraphenylethylene (TPE) moiety. Fast and efficient synthesis allowed the modular preparation of three dyes of tunable absorption and emission profiles. These constructs were extensively characterized by spectroscopic studies in different solvents, which revealed intense light‐harvesting ability and emissions in the deep‐red and NIR region with large Stokes shift values. Remarkably, the dyes exhibited AIE properties, retaining emissive ability in the aggregate state, thus emerging as attractive materials for their potential application in the development of luminescent devices.

Donor group influence on dye-sensitized solar cell device performances: Balancing dye loading and donor size

Four high photocurrent near-infrared (NIR)-absorbing metal-free organic sensitizers (ND1, ND2, ND3, and AP25) with varying nitrogen-based donor groups are examined for use in dye-sensitized solar cell (DSC) devices. One of the highest photocurrent generating organic dyes based on a triarylamine donor reported in the literature (AP25 at 19 mA/cm2) is compared to dyes varying the donor group with constant intramolecular charge transfer π-bridge-acceptor systems. Specific popular donor groups include the bulky Hagfeldt donor (ND1), a carbazole donor (ND2), and an indoline donor (ND3) which varies a large range of sizes (maximum width varies between 8 Å and 26 Å). Computational analysis, dye energetics, absorption profiles (in solution and on TiO2), device incident photon-to-current conversion efficiencies (IPCEs), electrochemical impedance spectroscopy, small modulated photovoltage transient spectroscopy, and device current-voltage curves are used to probe dye behavior based on donor group selection. Balancing donor size and dye loadings was found to be critical for higher performances with the DSC dyes accessing low energy photons near 900 nm.

Organic Neutral Radical Emitters: Impact of Chemical Substitution and Electronic-State Hybridization on the Luminescence Properties.

Neutral donor-acceptor (D-A•) organic radicals have recently attracted a great deal of attention as promising luminescent materials due to their strong doublet emission. Here, we consider a series of emitters based on substituted triarylamine (TAA) donors and a radical-carrying perchlorotriphenylmethyl (PTM) acceptor. We evaluate, by means of quantum-chemical calculations and theoretical modeling, how chemical substitution affects the electronic structures and radiative and nonradiative decay rates. Our calculations show that the radiative decay rates are dominated in all instances by the electronic coupling between the lowest excited state, which has charge-transfer (CT) character, and the ground state. On the other hand, the nonradiative decay rates in the case of TAA-PTM radicals that have high CT energies are defined by the electronic hybridization of the CT state with local excitations (LE) on the PTM moiety; also, these nonradiative rates deviate significantly from the gap law dependence that is observed in the TAA-PTM radicals that have low CT energies. These findings underscore that hybridization of the emissive state with high-energy states can, in analogy with the intensity borrowing effect commonly invoked for radiative transitions, enhance as well the nonradiative decay rates. Our results highlight that in order to understand the emissive properties of D-A• radicals, it is required that the electronic hybridization of the CT states with both the ground and the LE states be properly considered.

Giant magnetic field effects in donor-acceptor triads: On the charge separation and recombination dynamics in triarylamine-naphthalenediimide triads with bis-diyprrinato-palladium(II), porphodimethenato-palladium(II), and palladium(II)-porphyrin photosensitizers.

A series of triads consisting of a triarylamine donor, a naphthalenediimide acceptor, and a palladium photosensitizer bridge was investigated for the photoinduced electron transfer processes and the spin chemistry involved. In this series, the ligand in the palladium photosensitizer was varied from bis-dipyrrinato to porphodimethenato and to a porphyrin. With the porphyrin photosensitizer, no charge separated state could be reached. This is caused by the direct relaxation of the excited photosensitizer to the ground state by intersystem crossing. The bis-dipyrrinato-palladium photosensitizer gave only a little yield (7%) of the charge separated state, which is due to the population of a metal centered triplet state and a concomitant geometrical rearrangement to a disphenoidal coordination sphere. This state relaxes rapidly to the ground state. In contrast, in the porphodimethenato-palladium triads, a long lived (μs to ms) charge separated state could be generated in high quantum yields (66%-74%) because, here, the population of a triplet metal centered state is inhibited by geometrical constraints. The magnetic field dependent transient absorption measurement of one of the porphodimethenato triads revealed a giant magnetic field effect by a factor of 26 on the signal amplitude of the charge separated state. This is the consequence of a magnetic field dependent triplet-singlet interconversion that inhibits the fast decay of the charge separated triplet state through the singlet recombination channel. A systematic comparative analysis of the spin-dependent kinetics in terms of three classical and one fully quantum theoretical methods is provided, shedding light on the pros and cons of each of them.

New D-A-A'-Configured Small Molecule Donors Employing Conjugation to Red-shift the Absorption for Photovoltaics.

Four new donor-acceptor-acceptor' (D-A-A')-configured donors, CPNT, DCPNT, CPNBT, and DCPNBT equipped with naphtho[1,2-c:5,6-c']bis([1,2,5]-thiadiazole) (NT) or naphtho[2,3-c][1,2,5]thiadiazole (NBT) as the central acceptor (A) unit bridging triarylamine donor (D) and cyano or dicyanovinylene acceptor (A'), were synthesized and characterized. All molecules exhibit bathochromic absorption shifts as compared to those of the benzothiadiazole (BT)-based analogues owing to improved electron-withdrawing and quinoidal character of NT and NBT cores that lead to stronger intramolecular charge transfer. Favorable energy level alignments with C70 , together with the good thermal stability and the antiparallel dimeric packing render CPNT and DCPNT suitable donors for vacuum-processed organic photovoltaics (OPV)s. OPVs based on DCPNT : C70 active layers displayed the best power conversion efficiency (PCE)=8.3%, along with an open circuit voltage of 0.92 V, a short circuit current of 14.5 mA cm-2 and a fill factor of 62% under 1 sun intensity, simulated AM1.5G illumination. Importantly, continuous light-soaking with AM 1.5G illumination has verified the durability of the devices based on CPNT:C70 and DCPNT : C70 as the active blends. The devices were examined for their feasibility of indoor light harvesting under 500 lux illumination by a TLD-840 fluorescent lamp, giving PCE=12.8% and 12.6%, respectively. These results indicate that the NT-based D-A-A'-type donors CPNT and DCPNT are potential candidates for high-stability vacuum-processed OPVs suitable for indoor energy harvesting.

Positive electronic exchange interaction and predominance of minor triplet channel in CIDNP formation in short lived charge separated states of D-X-A dyads.

Previous transient absorption measurements using the magnetically affected reaction yield (MARY) technique for a series of rigidly linked electron donor/electron acceptor dyads (D-X-A) consisting of a triarylamine donor, a naphthalene diimide acceptor, and a meta-conjugated diethynylbenzene unit as a bridge had revealed the presence of electronic exchange interaction, J, in the photoexcited charge separated (CS) state. Here, we present results obtained by photochemically induced dynamic nuclear polarization (photo-CIDNP) that allows for determining the sign of J. By variation of the magnetic field from 1 mT to 9.4 T, pronounced absorptive maxima of CIDNP were detected for more than 20 1H nuclei disregarding the sign of their hyperfine coupling constants in the transient charge separated state, with positions of maxima close to those found by the MARY technique. Quantitative comparison of the observed CIDNP signals for various D-X-A dyads reveals an increase in the CIDNP enhancement factor with increasing population of the triplet state determined by MARY spectroscopy at zero magnetic field. For CIDNP of the methyl groups of the TAA donor dyads, we found in all studies a good linear dependence between the CIDNP signal amplitude and the initial population of the CS triplet state. The linear relationship together with the absorptive CIDNP allows us to conclude that (i) the sign of the electronic exchange interaction Jex is positive, (ii) CIDNP is formed predominantly in the vicinity of level anticrossing between the T+ and S electronic levels, and (iii) coherent triplet-singlet transitions are induced by hyperfine interaction and accompanied by simultaneous electron and nuclear spin flip, T+β→Sα.

The synthesis of brominated-boron-doped PAHs by alkyne 1,1-bromoboration: mechanistic and functionalisation studies.

The synthesis of a range of brominated-Bn-containing (n = 1, 2) polycyclic aromatic hydrocarbons (PAHs) is achieved simply by reacting BBr3 with appropriately substituted alkynes via a bromoboration/electrophilic C–H borylation sequence. The brominated-Bn-PAHs were isolated as either the borinic acids or B-mesityl-protected derivatives, with the latter having extremely deep LUMOs for the B2-doped PAHs (with one example having a reduction potential of E1/2 = −0.96 V versus Fc+/Fc, Fc = ferrocene). Mechanistic studies revealed the reaction sequence proceeds by initial alkyne 1,1-bromoboration. 1,1-Bromoboration also was applied to access a number of unprecedented 1-bromo-2,2-diaryl substituted vinylboronate esters directly from internal alkynes. Bromoboration/C–H borylation installs useful C–Br units onto the Bn-PAHs, which were utilised in Negishi coupling reactions, including for the installation of two triarylamine donor (D) groups onto a B2-PAH. The resultant D–A–D molecule has a low optical gap with an absorption onset at 750 nm and emission centered at 810 nm in the solid state.

Magnetic field effects in rigidly linked D-A dyads: Extreme on-resonance quantum coherence effect on charge recombination

Charge recombination in the photoinduced charge separated (CS) state of a rigidly linked donor/bridge/acceptor triad with a triarylamine (TAA) donor, a 1,3-diethynyl-2,5-dimethoxy benzene bridge (OMe), and a perylenediimide (PDI) unit as an acceptor, represents a spin chemical paradigm case of a rigid radical ion pair formed with singlet spin and recombining almost exclusively to the locally excited PDI triplet state (3PDI). The magnetic field dependence of the CS state decay and 3PDI formation kinetics are investigated from 0 to 1800 mT by nanosecond laser flash spectroscopy. The time-resolved magnetic field affected reaction yields spectra of the CS state population and 3PDI population exhibit a sharp and deep resonance at 18.9 mT, indicating level crossing of the S and T+ levels separated by an exchange interaction of J = 18.9/2 mT at zero field. The kinetics are biexponential around the resonance field and monoexponential outside that range. The monoexponential behavior can be simulated by a classical kinetic model assuming a single field dependent double Lorentzian function for the energy gap dependence of all spin conversion processes. The full field dependence of the kinetics has been simulated quantum theoretically. It has been shown that incoherent and coherent hyperfine coupling contribute to S/T+ spin conversion at all fields and that the biexponentiality of the kinetics at resonance is due to a partitioning of the overall kinetics into 2/3 of the singlet hyperfine states exhibiting strong isotropic coupling to T+ and 1/3 of the singlet hyperfine states that do not or only weakly couple isotropically to T+.

Thienopyrrolo[3,2,1-jk]carbazoles: Building Blocks for Functional Organic Materials.

The facile preparation of three regioisomeric thienopyrrolo[3,2,1-jk]carbazoles applying a convenient C–H activation approach is presented. The incorporation of thiophene into the triarylamine framework significantly impacted the molecular properties in comparison to the analogous indolo[3,2,1-jk]carbazole scaffold. Dependent on the exact substitution pattern, the absorption onsets of the new materials are shifted toward slightly higher wavelengths compared to the analogous indolo[3,2,1-jk]carbazole, whereas the emission maxima of the sulfur derivatives is shifted from 375 to 410 nm. In analogy, the HOMO–LUMO energy gap of the thienopyrrolo[3,2,1-jk]carbazoles is reduced compared to indolo[3,2,1-jk]carbazole. Therefore, the developed thienopyrrolo[3,2,1-jk]carbazoles enrich the family of triarylamine donors and constitute a novel building block for functional organic materials.

Influence of the auxiliary acceptor and π-bridge in triarylamine dyes on dye-sensitized solar cells.

Four metal-free organic dyes (AFL7-AFL10) based on triarylamine donors and different π-bridges with or without a benzothiadiazole auxiliary acceptor have been synthesized. The dyes' photophysical and electrochemical properties, theoretical calculations, and dye-sensitized solar cell (DSSC) performances have been investigated. Electrochemical measurement data indicate that varying the π-conjugacy system can tune the HOMO and LUMO energy levels. A high molar extinction coefficient combined with a broad absorption spectrum helps to reinforce the dyes' light harvesting ability; therefore, it could help to increase the JSC of the DSSCs. Among the four dyes, AFL7 bearing the bithiophene bridge achieves the best photocurrent performance with a JSC value of 16.94 mA cm-2, corresponding to an overall conversion efficiency η of 7.92% under standard AM 1.5 G conditions (that of N719 dye was 8.53% under the same conditions). The results show that the dyes based on the triarylamine donor containing fluorenyl and biphenyl moieties are promising candidates for improving the performance of DSSCs.

Synthesis of Aroylbenzoate‐Based Push‐Pull Molecules for OFET Applications

AbstractSolution‐processable organic semiconductors have attracted great attention in recent years, because of their performance and reliability in potential applications. Here, we report the solution processable donor‐acceptor (D−A) conjugated molecules comprised of aroylbenzoate as acceptor, triarylamine or methoxyphenyl groups as donor and ethynyl spacer. Molecules with triarylamine donor exhibited strong absorption at 350–380 nm. HOMO levels around 5.5 eV ensures low barrier for hole injection. Optimized geometry and charge distribution over the molecules are visualized by density functional theory (DFT). Organic field effect transistors of these molecules are fabricated with bottom gate‐top contact configuration. The devices exhibited charge carrier mobility up to 2.16 × 10−3 cm2 V–1 s–1 and ON/OFF of 104 with low threshold voltage of −3.2 V.