Treatment Of Tannery Wastewater Research Articles

Analysis and Treatment of Tannery Waste Water by using Combined Filtration and Coagulation Treatment Process

Abstract: Industry generates significant volumes of waste water laden with various pollutants, including suspended solids, organic compounds and heavy metals presenting considerable environmental challenges. This study proposes an innovation approach for the analysis and treatment of tannery waste water using a combined filtration and coagulation treatment process. The analysis phase involves a comprehensive characterization of the tannery effluent, identifying key contaminants and their concentrations. This understanding informs the design of an efficient treatment strategy. The treatment process integrates two key techniques i.e. filtration and coagulation.

Development of an electrocoagulation method using alternating pulse current to treat wastewater generated by tanneries

ABSTRACT Direct current electrocoagulation has various drawbacks, including electrode passivation, heat creation from energy consumption, and high sludge formation. The restrictions limit its usage in tannery wastewater treatment. Therefore, alternating pulse current EC (APC-EC) was developed to solve these obstacles. The study was empirically examined, considering high-frequency (3,000–11,000 Hz), stirring speed (400–1,200 rpm), and reaction time (15–30 min). This research examined how factors affect chemical oxygen demand (COD) removal efficiency, turbidity from trivalent chromium (Cr+3), and energy consumption for perforated aluminum electrodes. The central composite design in the surface response design approach has improved various operational parameters in the APC-EC process for tannery wastewater treatment. The employment of mathematical and statistical methods resulted in optimal removal of COD, Cr+3, and turbidity while reducing energy usage. Using mathematical and statistical methods, we achieved maximum COD, Cr+3 ion, and turbidity reduction while reducing energy use. The investigation found that COD (70.3%), Cr+3 (89.56%), and turbidity (96%) were the most rapidly removed components at 11,000 Hz, 576 rpm, and 30 min. Surface response data explain high-frequency APC-EC dynamics.

Phenotypic characterization for bioremediation suitability of isolates from Southern Tunisian tannery effluent

Effluents from the leather tanning industry contain diverse pollutants, including hazardous heavy metals, posing threats to public health and the surrounding environment. Indigenous bacterial isolates can represent an eco-friendly approach for tannery wastewater treatment; however, phenotypic characterization is necessary to determine whether these strains are suitable for bioremediation. In the present study, we analyzed seven new Enterococcus faecium strains and two new Bacillus subtillis strains isolated from effluents from the Southern Tunisian Tannery (ESTT). We evaluated phenotypic features beneficial for bioremediation, including biofilm formation, hydrophobicity, and exoenzyme activities. Additionally, we examined characteristics naturally occurring in environmental bacteria but less desirable in strains selected for bioremediation, such as antibiotic resistances and pathogenicity indicators. The observed phenotypes were then compared with whole-genome analysis. We observed biofilm production in two slime-producing bacteria, B. licheniformis RLT6, and E. faecium RLT8. Hydrophobicity of E. faecium strains RLT1, RLT5, RLT8, and RLT9, as well as B. licheniformis RLT6 correlated positively with increasing ESTT concentration. Exoenzyme activities were detected in E. faecium strains RLT2, RLT4, and RLT7, as well as B. licheniformis RLT6. As anticipated, all strains exhibited common resistances to antibiotics and hemolysis, which are widespread in nature and do not hinder their application for bioremediation. Importantly, none of the strains exhibited the pathogenic hypermucoviscosity phenotype. To the best of our knowledge, this is the first report consolidating all these phenotypic characteristics concurrently, providing a complete overview of strains suitability for bioremediation. ImportanceThe study evaluates the bioremediation potential of seven Enterococcus faecium strains and two Bacillus subtillis strains isolated from the effluents from the Southern Tunisian tannery (ESTT), which pose threats to public health and environmental integrity. The analysis primarily examines the phenotypic traits crucial to bioremediation, including biofilm formation, hydrophobicity, and exoenzyme activities, as well as characteristics naturally occurring in environmental bacteria related to heavy metal resistance, such as antibiotic resistances. Several strains were found to have high bioremediation potential and exhibit only antibiotic resistances commonly found in nature, ensuring their application for bioremediation remains uncompromised. The results of the exhaustive phenotypic analysis are contrasted with the whole genome sequences of the nine strains, underscoring the appropriateness of these bacterial strains for eco-friendly interventions in tannery wastewater treatment.

Impact of CeO2 modified cathode and PANI modified anode on tannery wastewater fed microbial fuel cell performance

Microbial fuel cell (MFC) technology is getting acceptance as an emphatic, sustainable and energy efficient alternative of conventional wastewater treatment strategies. MFCs utilize exoelectrogens as biocatalysts to degrade the complex organic substances present in wastewater with simultaneous power generation. The present study was aimed at investigating the impact of MFC electrode’s modification with CeO2 nanoparticles and polyaniline (PANI) on its performance characteristics. The hydrothermal approach was employed for the synthesis of CeO2 nanoparticles followed by their deposition on carbon cloth (CC) as MFC cathode, Whereas MFC’s anode i.e., CF/NF was modified by in-situe deposition of PANI. The synthesized material was characterized with FTIR, XRD, SEM, EDX and BET analysis. The experiments were performed using dual chambered MFC fed with leather tannery wastewater using modified and unmodified electrodes. The highest outcomes of power density and corresponding current density were observed with PANI@NF composite anode and CeO2@CC as cathode i.e., 279.3 mW/m2 corresponding to the current density of 581.8 mA/m2. The same MFC electrode configuration resulted in highest COD reduction, i.e., 80 % and coulombic efficiency of 19.86 %. On the other hand, MFC equipped with PANI@CF anode and CeO2@CC cathode also displayed comparable results. It was ascertained that modification of NF/CF anode with PANI (conductive polymer) and CC cathode with CeO2 nanoparticles have significantly improved the overall MFC operational performance regarding tannery wastewater treatment and bioelectricity generation.

Bioremedial Capacity of Indigenous Hydrophytes and Microalgae of Bangladesh: A Comparative Study on their Potential in Tannery Effluent Treatment

Aims: This study aimed to identify the bio-remedial potential of indigenous hydrophytes (Salvinia cucullata and Lemna minor) and microalgae (Spirulina platensis) of Bangladesh for treatment of tannery wastewater disposed in the open environment. Study Design: The capacity of improving the water quality of the tannery effluent by bioremediation was assessed. The quantitative determination included the comparison of physical characters (pH, TDS, EC, DO, COD) and heavy metal profile (Pb, Cr, Cu, Zn) of the tannery effluent before and after treatment. Effluent treatment was carried out by individual species separately and in combination with all for a total of 25 days. Place and Duration of Study: Major experiments were carried out at the Applied Botany Laboratory, Dhaka Laboratory, BCSIR, Dhaka, Bangladesh from January 2022 to February 2024. Quantitative estimations were carried out at Soil & Water Laboratory, Dhaka Laboratory, BCSIR, Dhaka, Bangladesh. Methodology: The tannery effluent was characterized by means of physiochemical parameters and heavy metal concentration prior to the experimental procedure. Four treatment plans were designed, three treatments (TSC, TLM, TSP) using individual species separately and one treatment (TC) using all three species in combination. The treatment continued for 25.0 days. The physiochemical parameters of the treated effluent were measured at 5.0-day intervals and heavy metal conc. Were measured on the 0th, 10th, and 25th days of the experiment. Comparative analysis of the data was utilized to determine useful species for further applied studies in future. Results: After treatments, a reduction at TDS level down to 3230 from 5150 mg/L, and an EC dropdown to 3290 from 10340 μS/cm was observed. Heavy metals removal capacity of the tested species was found as follows, S. cucullata: Zn > Cr >Pb> Cu, L. minor: Pb> Cr > Cu > Zn, S. platensis: Cu > Zn >Pb> Cr, and the combination treatment: Pb> Cu > Zn > Cr. The observation showed high efficiency of S. platensis in TDS reduction and Zn absorption, L. minor in COD reduction and Pb absorption, and S.cucullata in Zn absorption. Conclusion: The comparative data suggested the overall improvement of the effluent quality can be achieved by a combined treatment of L. minor and S. platensis, quickly and cost-efficiently. Further investigation is required for an in-depth understanding of their combined potential. Additionally, investigation will be carried out on their potential in Arsenic (As) removal and nano-particle production from post-treatment biomass.

Lodo do Curtimento de couro em Argamassa: Valorização Sustentável

Purpose: This study aims to investigate the valorisation of sludge from Leather Tannery Wastewater Treatment Plants (LTWWTP) by incorporating it into cement mortars. Theoretical framework: The substantial quantity of waste generated by industries coupled with the scarcity of natural resources calls for the analysis, development, and implementation of treatment methods to recover and reuse materials, thereby minimising the environmental impact of waste disposal. The leather tanning industry, a significant polluter due to its use of hazardous and heavy materials, requires sustainable solutions for waste management. One promising approach is the incorporation of waste into cementitious matrices. Method: Three scenarios were examined: low-moisture sludge, ash obtained via incineration, and wet oxidation. Test specimens were prepared with varying proportions of cement replacement (0, 3, 5, 7, and 10%), and their flexural and compressive strengths were evaluated. Additionally, chemical analyses were conducted to assess solubility. Results and Conclusion: The results indicate that sludge can be used in small proportions without compromising the mechanical strength of the mortar. Substituting 10% cement with ash using the INC-2 incineration method improved mortar quality, exhibiting a higher compressive strength of 41 MPa and minimal water absorption (3.28%). Research implications: Drawing from these promising findings, it can be confidently asserted that utilising WWTP sludge in mortar is a practical, eco-conscious solution for civil construction. Furthermore, it is a pivotal step towards addressing the challenge of hazardous sludge disposal. Originality/value: The findings from this research will contribute to sustainable waste management practices and pave the way for responsible and eco-friendly utilisation of industrial waste in cementitious materials, thus minimising environmental burdens.

Performance evaluation of facile synthesized CA-PVA-GO composite for the mitigation of Cr(Ⅲ) and C.I. acid violet 54 dye from tannery wastewater

Untreated tannery wastewater contains a large amount of toxic metals, dyes, and other pollutants, which pose adverse effects on the ecosystem and public health. In this work, a calcium alginate-poly vinyl alcohol-graphene oxide (CA-PVA-GO) composite was prepared to remove metals and dyes, particularly Cr(Ⅲ) and CI acid violet 54 (AV54) dye, from tannery wastewater. FESEM, FTIR, and XRD analyses were applied to characterize the GO and CA-PVA-GO. Different operational variables, viz. pH (3.0–5.5 for Cr(III) and 2–7 for dye), dosage (0.164–2.46 g/L), contact time (10–60 min), initial concentration (39, 65, 98, and 201 ppm for Cr(III) and 21.5, 38.5, 54.5, and 61.75 ppm for dye), and temperature (298, 308, 318, and 328 K) were studied to evaluate the efficiency of the CA-PVA-GO composite. The optimum conditions for Cr(Ⅲ) and AV54 dye adsorption were found to be pH (5.0 and 3.0), dosage (0.82 g/L for both), and time (45 and 60 min), respectively, with 35.35 ± 1.43% and 84.63 ± 2.54% removal efficiency. The experimental data was analyzed through the Langmuir and Freundlich isotherms. The maximum adsorption capacity (qm) was observed at 173.01 and 74.68 mg/g for Cr(Ⅲ) and AV54 dye, respectively. The pseudo-second-order kinetic model was fitted better (R2 = 0.981, 0.995, 0.92, and 0.995) than first-order for AV54 dye adsorption. Thermodynamic analyses revealed that the Cr(Ⅲ) and AV54 dye adsorption processes were spontaneous and exothermic. The value of Gibbs free energy (ΔG) for Cr(III) adsorption was obtained at −7.433, −4.508, −2.626, and −1.311 kJ/mol, whereas it was −5.178, −4.867, −4.628, and −4.555 kJ/mol for dye. The values of ΔH and ΔS were −67.257 and −0.198 kJ/mol for Cr(III) and −10.852 and −0.019 kJ/mol for the dye removal. The regenerated CA-PVA-GO composite was reused successfully. Different physicochemical parameters, viz., concentration, pH, TDS, EC, BOD5, and COD of chrome tanning and dyeing effluents, were analyzed before and after the adsorption. The results of chromium and dye removal from tannery wastewater were 53.18% and 93.91%, revealing that the developed eco-friendly CA-PVA-GO composite could be an operative adsorbent for tannery wastewater treatment and possibly scaled up to an industrial level.

Fe recovery from drinking water treatment sludge for reuse in tannery wastewater treatment: Machine learning and statistical modelling

This work experimentally and numerically studied the reusability of Fe recovered from water treatment sludge as a coagulant and compared its performance with a commercial coagulant in tannery wastewater treatment. The performance of the recycled and commercial coagulants in total suspended solid (TSS), chemical oxygen demand (COD), color, chromium (Cr3+) and turbidity removal was compared with considering pH, coagulant type and dose as independent variables. Additionally, the process was modelled by two statistical and machine learning procedures, i.e., response surface methodology (RSM) and artificial neural network (ANN). For RSM model, a 32 run experimental matrix was designed by factorial design, while ANN model was developed by a dataset extracted from the publications inclusive of the 32 experiments. The results showed Fe recovery rate of 181 mg/g dry sludge. The maximum TSS, COD, color, Cr3+ and turbidity removal by recovered and commercial coagulants were (85 %, 40 %, 42 %, 68 %, and 88 %) and (70 %, 35 %, 49 %, 64 % and 88 %) respectively. ANN COD removal model showed a good prediction in all training, validation and testing phases with R 0.891, 0.963 and 0.917 respectively. While the R for TSS, COD, color, Cr3+ and turbidity statistical models were 0.962, 0.866, 0.960, 0.962 and 0.973 respectively.

A Fenton-based approach at neutral and un-conditioned pH for recalcitrant COD removal in tannery wastewater: Experimental test and sludge characterization

The combination of raw animal skin manufacturing processes involves the use of large amounts of chemicals, resulting in the generation of complex and highly polluted tannery wastewater. In this context, the high concentration of chloride in tannery wastewater represents a crucial bottleneck. Indeed, sodium chloride, commonly used in tannery industry to prevent skin rot, increases the concentration of chlorides up to 50 %. At the same time, most of the advanced oxidation processes usually employed in tannery wastewater treatment to remove recalcitrant COD involve the use of conditioning agents, thus increasing the overall concentration of chlorides in the treated effluent. The aim of this study was to evaluate the electrochemical peroxidation process (ECP) efficiency in the treatment of tannery wastewater without changing pH, to improve Fenton technology by avoiding the use of chemicals. The influence of different electric currents on COD and color removal was investigated. The characterization of the produced sludge was conducted through FTIR, SEM and XRD analysis, exploring the morphology and composition of precipitate, depending on the applied current. Although an electrical current of 750 mA yields the highest COD and color removal efficiency (69.7 % and 97.8 %, respectively), 500 mA can be considered the best compromise because of energy consumptions. Iron oxides and hydroxides were generated during the ECP process, playing the role of coagulants through the absorption of organic and inorganic contaminants. The consumption of energy increased as a function of time and applied current; however, cost analysis showed that the electrodes contributed the most to the total cost of the process. In authors' knowledge, the application of ECP process as a tertiary treatment for the removal of recalcitrant COD in tannery wastewater represents a novelty in the literature and the results obtained can be considered as the basis for scaling up the process in future research.

Evaluation of Horizontal Subsurface Flow Constructed Wetland for Treatment of Tannery Wastewater in Kaduna, Nigeria

Tannery wastewater is often characterized by their complexities in terms of contaminants and require specialized treatment technologies. Hence, the objective of this paper is to explore the performance evaluation of a laboratory-scale horizontal subsurface flow constructed wetland (HSSFCW) in the treatment of tannery wastewater in Kaduna, Nigeria using appropriate standard techniques. Out of the tree replica systems, two were respectively vegetated with Phragmites australis and Polygonum salicifolium + Ipomoea carnea, while the last was left un-vegetated and used to treat tannery effluent. Characteristics such as Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Nitrates (NO-3), phosphates (PO43-), suspended solids (TSS) and chromium (Cr) analyzed using standard methods were used as indicators of the treatment efficiency under a 6-day Hydraulic Retention Time. The results showed that the system vegetated with Phragmites australis had the best performance in the removal of BOD, COD, NO-3, PO43- and Cr (97.9%, 94.2%, 54.4%, 44.1% and 98.4% respectively). The system vegetated with Polygonum salicifolium + Ipomoea carnea on the other hand had the best performance for SS removal (92.6%) while the system vegetated with Phragmites australis had a SS removal efficiency of 92.3%. The performance indices for unvegetated cell, Phragmites australis vegetated cell and Polygonum salicifolium + Ipomoea carnea vegetated cell were respectively, 4, 9 and 8 which shows that the cell vegetated with Phragmites australis had the best performance in the treatment of tannery wastewater. It also showed that the performance of the cell vegetated with Polygonum salicifolium + Ipomoea carnea was also comparable with that of Phragmites australis. This study demonstrated that the HSSFCW vegetated with both Phragmites australis and Polygonum salicifolium + Ipomoea carnea can effectively treat tannery wastewater. There is however a need to investigate the efficiency of the system over a longer period with consideration of microbial characteristics.

Hyphenated Fenton-column packed nMnO-modified wood biochar for tannery effluent treatment: Adsorption mechanism and reusability study

Industrial wastewater contains a wide range of pollutants that, if released directly into natural ecosystems, have the potential to pose serious risks to the environment.This study aims to investigate sustainable and efficient approaches for treating tannery wastewater, employing a combination of hyphenated Fenton oxidation and adsorption processes. Rigorous analyses were conducted on wastewater samples, evaluating parameters like COD, sulphide, NH3–N, PO43−, NO3−, and Cr(VI). The performance of this adsorbent material was gauged through column adsorption experiments. A comprehensive characterization of the adsorbent was undertaken using techniques such as SEM, EDX, BET, FTIR, XRD, and LIBS. The study delved into varying operational parameters like bed depth (ranging from 3.5 to 9.5 cm) diameter (2.5 cm) and influent flow rate (ranging from 5 to 15mLmin-1). The experimental outcomes revealed that increasing the bed depth and decreasing the influent flow rate significantly bolstered the adsorption column's effectiveness. Breakthrough curves obtained were fitted with different models, including the Thomas and Yoon-Nelson models. The most optimal column performance was achieved with a bed height of 10.5 cm and a flow rate of 5mLmin-1. The combined process achieved removal efficiencies of 94.5% for COD, 97.4% for sulphide, 96.2% for NH3–N, 83.1% for NO3−, 79.3% for PO43−, and 96.9% for Cr(VI) in tannery effluent. This research presents a notable stride toward the development of sustainable and efficient strategies for tannery wastewater treatment.

Evaluating the effectiveness of coagulation–flocculation treatment on a wastewater from the moroccan leather tanning industry : An ecological approach

The removal of pollutants from tannery wastewaters, which is renowned for its substantial volumes, intricate composition, and considerable hazards to human health and the environment, is a prominent research area in the field of water treatment. The aim of this study is to employ a bio-coagulant derived from Parkinsonia aculeata seeds and a bio-flocculant derived from Hibiscus esculentus to minimise the concentration of pollutants in the combined wastewater originating from tanneries. In the course of the research, a thorough physicochemical analysis of the coagulating and flocculating agents, Parkinsonia aculeata (PA) and Hibiscus esculentus (HE), was performed using techniques such as XRD (X-ray diffraction), FTIR (Fourier-transform infrared spectroscopy), and SEM-EDS (scanning electron microscopy-energy dispersive X-ray spectroscopy). This analysis aimed to determine the composition and characteristics of these biomasses. Subsequently, a comprehensive overview was conducted to summarize the various factors that influence the treatment of tannery wastewater through coagulation/flocculation. This was accomplished by manipulating the target factors and observing their impact on the removal of specific physicochemical parameters such as chemical oxygen demand (COD), electrical conductivity (EC), total chromium (Cr) and Optical density (OD). The variables that were established include pH, dosage of coagulant and flocculant, as well as the speed and duration of agitation in both the fast and slow mixing stages. The experiments were carried out while taking into account the optimal parameters, leading to the near-complete removal of all analyzed pollutants. The optimal requirements for the Parkinsonia aculeata-Hibiscus esculentus Coagulation Flocculation System involve adjusting the pH to 8, choosing concentrations of approximately 1.25 g L−1 and 0.6 g L−1 for the coagulant and flocculant respectively, maintaining a fast speed of 170 rpm for 3 min while keeping the slow agitation at around 30 rpm for 20 min. The removal rates achieved after treating tannery wastewater using the PA-HE coagulant-flocculant combination demonstrate high efficacy, with values reaching approximately 100% for TSS, 98.71% for BOD5, 99.93% for COD, 98.88% for NH4+, 98.21% for NO3−, 90.32% for NO2−, 93.13% for SO42−, 95.44% for PO43−, 96.08% for OD and 60% for total chromium. These results indicate the successful removal of a wide range of pollutants from tannery wastewater through the PA-HE treatment method. In predicting the CF treatment approach, PCA has been employed to preprocess the input data and determine the key variables that impact the process. This can streamline the modeling process and enhance the precision of the predictions.

Bone Char Adsorption of COD and Colour from Tannery Wastewater: Breakthrough Curve Analysis and Fixed Bed Dynamic Modelling

This study delves into the simultaneous adsorption of chemical oxygen demand (COD) and colour from tannery wastewater using bone char through a fixed bed column. The bone char, which was derived from cattle skulls, was characterised using the Fourier transform infrared spectroscopy, Braeuer–Emmett–Teller surface area analysis, and the scanning electron microscope/energy-dispersive X-ray spectroscopy. The effects of different process conditions, specifically, packed bed height (5, 10, and 15 cm) and flow rate (2, 5, and 8 mL/min), on the adsorption efficiency of the fixed bed column were assessed through breakthrough curve analysis. The results revealed that the efficiency of the column bed enhanced with increasing bed height and declined with increasing wastewater flow rate. The optimal operating conditions for COD and colour removal onto the bone char occurred at 15 cm bed height and 2 mL/min flow rate. The adsorption capacities at these conditions were 227.4 mg/g and 53.03 Pt-Co/g for COD and colour, respectively. The kinetics associated with the fixed bed adsorption of COD and colour onto bone char were elucidated through the fitting of the Thomas, Adams–Bohart, and Yoon–Nelson models to the experimental data. Among the three models, the Yoon–Nelson model gave the best prediction of the experimental data. Maximum adsorption efficiencies of 80.65% and 84% were attained for COD and colour removal, respectively, proving that bone char is a promising and ecologically friendly alternative adsorbent for the treatment of tannery wastewater.

Study of chromate (VI) removal via sequential combined fenton’s process and adsorption by nano-magnesium oxide-modified wood biochar for tannery wastewater treatment

Study of chromate (VI) removal via sequential combined fenton’s process and adsorption by nano-magnesium oxide-modified wood biochar for tannery wastewater treatment

Green and Efficient Removal of Toxic Lead and Chromiumfrom Synthetic Leather Tannery Wastewater using Electrocoagulation

Most of leather tanneries in Pakistan dispose of tannery effluent untreated in sewage lines causing serious harmful environmental impact. Some of tanneries use conventional activated sludge process releasing large quantity of sludge and not effective for treating heavy metal in leather tanneries. The manuscript deals with implementation of electrocoagulation technology for removal of Cr and Pb from Leather tannery effluent, investigation of operating parameters current density, treatment time and pH on removal efficiency. Electrodes was made of Iron having dimension 9.5 cm x 0.6 cm x 0.4 cm and affective surface area of electrode was 76 cm<sup>2</sup>. After conducting different experiments at various operating conditions, pH 3.5 and current density 18.8 milliamp/cm2 was found to be optimized condition for treating 1 liter of synthetic leather tannery effluent. The maximum removal efficiency of chromium and lead was obtained 87.8 % and 62.7 % respectively at pH 3.5 and current density of 18.8 milliamp/cm<sup>2</sup>. The EDX analysis of sludge shows presence of chromium, lead and iron element in sludge and FTIR analysis shows the presence of hydroxyl functional group in sludge, it is strong evidence of iron polymer complexes formation with chromium and lead during treatment of synthetic leather tannery wastewater. Both of these analysis show strong evidence of effective electrocoagulation process. It was proved that electrocoagulation can effectively treat synthetic leather tannery effluent. The SEM analysis shows production of coagulant on surface of electrode.

In situ green synthesis of copper(ii) oxide (CuO) and maleic anhydride grafted polypropylene (PP-MAH) for highly efficient nanocatalysis in tannery wastewater treatment

Green synthesis of CuO/PP-MAH for green catalysis of tannery wastewater treatment.

Impact of Tannery Wastewater Treatment Plant Effluent on Phytoplankton Community of Receiving Stream Heading to Indian-Sundarbans

Impact of Tannery Wastewater Treatment Plant Effluent on Phytoplankton Community of Receiving Stream Heading to Indian-Sundarbans

Efficient treatment of tannery wastewater through aeration, coagulation, and algal pond.

Tannery wastewater effluents contain many toxic and carcinogenic heavy metals and physiochemical parameters that need to be removed before these effluents enter in the main water bodies or rivers. In this study, the effluents from the tannery industry are treated through aeration, coagulation, and Chlorella vulgaris pond treatment processes for the removal of physiochemical: parameters only. The effect of removal efficiencies (%) was studied on the physicochemical parameters, including salinity, electrical conductivity (EC), total dissolved solids (TDS), turbidity, total suspended solids (TSS), biochemical oxygen demand (BOD), and chemical oxygen demand (COD). The key results showed that the removal of EC, TDS, turbidity, TSS, BOD, and COD was 80.2%, 67%, 81%, 80.8%, 68.6%, and 100%, respectively, in raw wastewater treatment having 25, 50, and 70 g of algae C. vulgaris doses. The removal efficiencies (%) of salinity, EC, TDS, turbidity, TSS, BOD, and COD were 83%, 87.1%, 77.1%, 80%, 40%, 97%, and 98%, respectively, during coagulated wastewater treatment with three doses of algae. The observed improvement in treated wastewater indicated that the removal efficiencies (%) of salinity, EC, TDS, turbidity, TSS, BOD, and COD were 85.7%, 39.3%, 81.3%, 67.8%, 50.3%, 97%, and 98%, with C. vulgaris. This study confirmed that the treatment of tannery wastewater by these processes increased the pollutant removal efficiencies as all the physiochemical parameters were exceeding the permissible limits. This research will be helpful to treat the industrial wastewaters or effluents before it further mixes up in the main water streams. In this way, water quality will be better, aquatic life will be saved, and further researchers can analyze more ways for efficient treatments as they have a baseline data through this study findings. One of the most pollutant sources in terms of both physical and chemical parameters is the produced wastewater from tannery industries. The effluents from tannery industry are treated through aeration, coagulation, and algae ponds treatment processes. These treatment made the tannery wastewater as environmental friendly.

Effect of polyethylene terephthalate particles on filamentous bacteria involved in activated sludge bulking and improvement in sludge settleability

Excessive proliferation of filamentous bacteria within activated sludge leads to sludge structural instability and diminished settling properties, which is a prevalent issue in tannery wastewater treatment. Based on available information, there is a lack of research on the impact of particle addition on filamentous bacteria in activated sludge, specifically with respect to a reduction in sludge bulking. Therefore, polyethylene terephthalate (PET) was selected as the test material to elucidate the effect of particles on sludge bulking. The results illustrate that particles measuring 0.1 mm in diameter have a profound influence on both the quantity and morphological characteristics of filamentous bacteria in activated sludge. In an anaerobic-aoxic-oxic (AAO) reactor, the use of 4000 particles/L led to a significant decrease in the sludge volume index (SVI), reducing it from 358 mg/L to 198 mg/L. The results offer significant insights for resolving sludge bulking problems in tannery wastewaters. Moreover, the results are significant as a reference point for future investigations on the efficacy of incorporating diverse particulate materials to ameliorate issues associated with activated sludge bulking.

Removal of chromium from tannery industry wastewater using iron-based electrocoagulation process: experimental; kinetics; isotherm and economical studies

Chromium is a hazardous compound from industrial processes, known for its toxicity, mutagenicity, teratogenicity, and carcinogenicity. Chemical methods are efficient but cost-effective alternatives with reduced sludge are sought. Electro-coagulation, utilizing low-cost iron plate electrodes, was explored for factual tannery wastewater treatment in this manuscript. Operating parameters such as initial chromium concentration, voltage, electrode number, operating time, agitation speed and current density has been studied to evaluate the treatment effeciency. Under optimal conditions (15 V, 0.4 mA/cm2, 200 rpm, 330 ppm chromium, 8 iron electrodes with a total surface area of 0.1188 m2, 3 h), chromium elimination was 98.76%. Iron anode consumption, power use, and operating cost were 0.99 gm/L, 0.0143 kW-h/L, and 160 EGP/kg of chromium eliminated, respectively. Kinetics studies were pursued first-order reaction (97.99% correlation), and Langmuir isotherms exhibited strong conformity (Langmuir R2: 99.99%). A predictive correlation for chromium elimination (R2: 97.97%) was developed via statistical regression. At HARBY TANNERY factory in Egypt, industrial sewage treatment achieved a final chromium disposal rate of 98.8% under optimized conditions.