Industrial Wastewater Treatment Research Articles

Development of alginate beads loaded with bioactive ingredients from Chlorella vulgaris cultivated in food industry wastewaters

Microalgae are increasingly recognized for their potential in the food sector due to their rapid growth and rich content in proteins, carbohydrates, and pigments. The extraction of pigments from microalgal biomass holds promise for their utilization as natural colorants and antioxidants. To address the economic challenges associated with microalgae cultivation, particularly high nutrient costs, this study focused on cultivating Chlorella vulgaris in a mixture of food industry wastewaters (brewery wastewater, expired orange juice and cheese whey). This resulted in a microalgae-bacteria consortium with a concentration of 2.2 g·L−1 dry weight after 5 days of cultivation. The wastewater bioremediation ranged between 23 and 77 %, and the produced microalgae biomass contained 21.68 ppm lutein, 36.47 ppm a-chlorophyll and 11.19 ppm b-chlorophyll. The extraction process employed a solvent screening strategy with food industry-accepted solvents used to extract high-value compounds efficiently. Ethanol was the most effective solvent, outperforming acetone, ethyl acetate, and hexane. An upscaled extraction process was conducted using 10 g lyophilized microalgae. After ethanol evaporation, the microalgal extract was re-diluted in sunflower oil and encapsulated in alginate beads, achieving an encapsulation yield of 93.3 %. Lutein, identified as one of the main compounds in the extract, exhibited a satisfactory encapsulation efficiency of 55 %. The efficient encapsulation of the microalgae components in alginate beads was verified by the alteration of the colorimetric parameters of these alginate beads compared to those loaded with pure sunflower oil as well as empty beads. These findings highlight the potential of microalgae as a valuable tool for transforming food industry wastewater into high-value products, especially when microalgal extract is encapsulated in alginate beads. This strategy presents substantial prospects for the food industry, merging effective wastewater valorization with biomass production and bioactive compound extraction. It exemplifies a circular bioeconomy, showcasing sustainable resource management and value creation.

PVDF-Halloysite-Ceria Multifunctional Membrane for One-step Treatment to Industrial Effluent

Industrial wastewater, containing diverse pollutants like dyes and oils, poses detrimental environmental challenges. Membrane technology addresses this complexity well but requires tailored nanofiller modifications that enhance hydrophilicity, oleophobicity, and antifouling potential for efficient separation. In this context, our work focuses on the development of mixed matrix membranes (PV-H-C) – PVDF, halloysite nanotubes (HNTs), and ceria nanoparticles – for effective dye and oil-water emulsion separation, enabling high flux recovery. The tubular structure of HNTs, with a lumen, enables the encapsulation and controlled distribution of ceria nanoparticles, preventing their agglomeration and leading to more uniform dispersion within the membrane matrix. HNTs porous structure, high surface area, and numerous adsorption sites within its nanotubes excel in rapid dye adsorption and ceria’s inherent hydrophobic properties along with low surface energy, forms a barrier against oil adhesion and spreading. Optimal results were achieved by loading 2% HNT and 1% ceria in the PVDF matrix, ensuring improved membrane performance. HNTs enhanced hydrophilicity and achieved pure water permeate flux of 1698L/m2.h.bar. Developed membranes are super-oleophobic with an underwater contact angle of 132° + 3°and show a 100% increase in dyes and oils separation efficiency as compared to the pristine PVDF membranes. This unique integration of ceria with halloysite nanotubes in PV-H-C membranes is pivotal, bestowing exceptional anti-fouling characteristics and reusability, while providing a one-step, comprehensive solution for the effective treatment of complex industrial wastewater that encompasses both oil and complex dyes.

Synthesis, characterisation and application of organic and inorganic bentonite for the removal of gentian violet

ABSTRACT The intensive use of dyes in industry has caused serious pollution problems, due to industrial wastewater discharges. It is well known that dyes have harmful effects on humans, animals, and other living beings. Therefore, the treatment of industrial wastewater before its release into the environment requires great attention. This work is devoted to the study of the effect of organic modifications by DMSO and/or CTAB and an inorganic modification by spinel oxide ZnCr2O4 on the structural and textural properties of local clay (M’Zila bentonite). The materials resulting from these modifications are used as adsorbents for a cationic dye such as gentian violet. These materials were synthesised and characterised by XRD, FTIR, BET and SEM. These analyzes confirmed the considerable changes in the structure of the clays modified by DMSO and/or CTAB- ZnCr2O4, the formation of pillared bentonites and the increase in the basal spacing’s of the modified clays by 15.05 Å for the bentonite of M’Zila at 23.80 Å for bentonite-CTAB-ZnCr2O4 (BCZnCr), at 27.37 Å for bentonite-DMSO-ZnCr2O4 (BDZnCr) and at 25.89 Å for bentonite-DMSO-CTAB-ZnCr2O4 (BDCZnCr).These modifications produced a rougher and more porous surface, resulting in a significant increase in the specific surface area from 60.13 m2 g−1 for sodium bentonite to 104.63 m2 g−1 for BCZnCr and 104.59 m2 g−1 for BDCZnCr. The adsorption of gentian violet was carried out under the following conditions: solid liquid ratio: 1 g/L, pH = 10 and contact time at equilibrium 1 h. The adsorption kinetics perfectly follows the pseudo second order model as well as that of intraparticle diffusion for all materials. The isotherms are of type S; they are well described by the Langmuir-Freundlich model. The thermodynamic parameters indicate that the physisorption of gentian violet by the different materials is spontaneous, exothermic, and disordered.

A review on sustainable management of biomass: physicochemical modification and its application for the removal of recalcitrant pollutants-challenges, opportunities, and future directions.

Adsorption is one of the most efficient methods for remediating industrial recalcitrant wastewater due to its simple design and low investment cost. However, the conventional adsorbents used in adsorption have several limitations, including high cost, low removal rates, secondary waste generation, and low regeneration ability. Hence, the focus of the research has shifted to developing alternative low-cost green adsorbents from renewable resources such as biomass. In this regard, the recent progress in the modification of biomass-derived adsorbents, which are rich in cellulosic content, through a variety of techniques, including chemical, physical, and thermal processes, has been critically reviewed in this paper. In addition, the practical applications of raw and modified biomass-based adsorbents for the treatment of industrial wastewater are discussed extensively. In a nutshell, the adsorption mechanism, particularly for real wastewater, and the effects of various modifications on biomass-based adsorbents have yet to be thoroughly studied, despite the extensive research efforts devoted to their innovation. Therefore, this review provides insight into future research needed in wastewater treatment utilizing biomass-based adsorbents, as well as the possibility of commercializing biomass-based adsorbents into viable products.

A bio-based strategy for efficient industrial wastewater treatment using TiO2 photocatalysis

A bio-based strategy for efficient industrial wastewater treatment using TiO2 photocatalysis

Bioremediation of brewery wastewater using Arthrospira sp.: Preliminary assessment of biomass as a biofertilizer toward circular economy

Bioremediation of brewery wastewater using Arthrospira sp.: Preliminary assessment of biomass as a biofertilizer toward circular economy

Symbiotic virus-bacteria interactions in biological treatment of coking wastewater manipulating bacterial physiological activities

Biological treatment is commonly used in coking wastewater (CWW) treatment. Prokaryotic microbial communities in CWW treatment have been comprehensively studied. However, viruses, as the critical microorganisms affecting microbial processes and thus engineering parameters, still remain poorly understood in CWW treatment context. Employing viromics sequencing, the composition and function of the viral community in CWW treatment were discovered, revealing novel viral communities and key auxiliary metabolic functions. Caudovirales appeared to be the predominant viral order in the oxic-hydrolytic-oxic (OHO) CWW treatment combination, showing relative abundances of 62.47 %, 56.64 % and 92.20 % in bioreactors O1, H and O2, respectively. At the family level, Myoviridae, Podoviridae and Siphoviridae mainly prevailed in bioreactors O1 and H while Phycodnaviridae dominated in O2. A total of 56.23–92.24% of novel viral contigs defied family-level characterization in this distinct CWW habitat. The virus-host prediction results revealed most viruses infecting the specific functional taxa Pseudomonas, Acidovorax and Thauera in the entire OHO combination, demonstrating the viruses affecting bacterial physiology and pollutants removal from CWW. Viral auxiliary metabolic genes (AMGs) were screened, revealing their involvement in the metabolism of contaminants and toxicity tolerance. In the bioreactor O1, AMGs were enriched in detoxification and phosphorus ingestion, where glutathione S-transferase (GSTs) and beta-ketoadipyl CoA thiolase (fadA) participated in biodegradation of polycyclic aromatic hydrocarbons and phenols, respectively. In the bioreactors H and O2, the AMGs focused on cell division and epicyte formation of the hosts, where GDPmannose 4,6-dehydratase (gmd) related to lipopolysaccharides biosynthesis was considered to play an important role in the growth of nitrifiers. The diversities of viruses and AMGs decreased along the CWW treatment process, pointing to a reinforced virus-host adaptive strategy in stressful operation environments. In this study, the symbiotic virus-bacteria interaction patterns were proposed with a theoretical basis for promoting CWW biological treatment efficiency. The findings filled the gaps in the virus-bacteria interactions at the full-scale CWW treatment and provided great value for understanding the mechanism of biological toxicity and sludge activity in industrial wastewater treatment.

Evaluating the Influence of Reverse Osmosis on Lakes Using Water Quality Indices: A Case Study in Saudi Arabia

A drastic level of resource degradation was revealed through a preliminary evaluation (completed in 2016) of water quality in a recreational lake in the second industrial city in Dammam, Saudi Arabia. The primary signs were a foul smell, algal bloom, high turbidity, and lack of aquatic life. This study aims to evaluate the influence of reverse osmosis (RO) on lake water quality. The recreational lake consists of two connected lakes (Lakes 1 and 2), which receive treated effluent from an industrial wastewater treatment plant. Composite samples were collected from the lakes to analyze their physiochemical parameters. Descriptive analyses were performed, and two water quality indices were developed to observe the variations in water quality conditions between the two periods (2016 and 2021). The results indicated that the water parameters of total dissolved solids (TDS), sulphate (SO42−), biological oxygen demand (BOD), and dissolved oxygen (DO) in 2016 (3356, 4100, 516, and 1.32 mg/L, respectively) were significantly improved in 2021 (2502, 1.28, 9.39, and 7.79 mg/L, respectively). The results of the water quality index (WQI) and comprehensive pollution index (CPI) indicated that the water quality in Lake 1 was significantly enhanced in 2021 (WQI = 85, CPI = 1) in comparison with assessment data from 2016 (WQI = 962, CPI = 8). However, the data from Lake 2 revealed higher pollution levels in 2021 (WQI = 1722, CPI = 18) than those recorded in 2016 (WQI = 1508, CPI = 13). As indicated by the absence of bad smells, algal blooms, and restoration of aquatic life, the RO intervention successfully improved the water quality in Lake 1. The WQI and CPI were helpful tools for evaluating lake water quality.

Rapid cultivation of aerobic granular sludge for shale gas flowback water treatment by bioaugmentation with inoculating multifunctional fungal pellets

Aerobic granular sludge (AGS) technology showed great potentials in treatment of hypersaline industrial wastewater such as shale gas flowback water (SGFW), while long start-up period was still a major bottleneck. To both strengthen its granulation and pollutant removal efficiency, herein, one multifunctional fungus Aspergillus sydowii NCSL-XY1 was first isolated with the capacities including formation of fungal pellets, salt tolerance, and efficient degradation of organics in SGFW. Subsequently, its appropriate fungal pellets were used to try to shorten the start-up period of AGS in SGFW. The results showed that inoculating fungal pellets evidently accelerated the formation of AGS from 41 to 16 days. Also, it could enhance the TOC removal from ∼30% to ∼45% in the initial start-up period (Day 2-Day 11). Mechanisms analysis showed that the inoculation of fungal pellets increased EPS secretion and microbial community diversity. When the reactor stabilized, both of the AGS in R1 and R2 had similar D50 (∼1200 μm), SVI30 (∼30 mL/g), and SVI30/SVI5 (∼0.95). Also, the TOC and PAM removal in R1 and R2 were also similar and maintained at ∼71% and ∼20%. Overall, the inoculated fungal pellets played significant roles of both biomass carrier and synergistic degrader in facilitation of AGS start-up, while it had limited functions after the granules maturation. This study provided a universally effective bioaugmentation mode (screening degrading fungus and inoculating its fungal pellets) for AGS cultivation in treatment of refractory industrial wastewater.

Hexagonal boron nitride-doped carbon membrane as anode for the enhanced adsorption and electrochemical oxidation of phenol

An activated carbon membrane (ACM) doped with hexagonal boron nitride (h-BN) was fabricated by using activated carbon as the raw material and phenolic resin as the binder. The preparation process involves blending raw materials, ball milling, membrane pressing, and high-temperature carbonization. The conductive ACM was employed as an anode to constitute an electrochemical membrane reactor (EMR) for phenol removal. The effect of h-BN doping rate (0–5wt.%) on the properties of ACM was explored. Results showed that ACM1 (1wt.% h-BN) displayed a small pore size (20nm), high porosity (41.6%), large specific surface area (446.8 m2/g), and strong mechanical strength (15.4MPa) compared to the pristine ACM0. The oxygen precipitation potential of ACM1 (2.11V) was much higher than that of ACM0 (1.53V), thus reducing oxygen generation at the anode in EMR for phenol degradation. The phenol removal rate of phenol obtained from EMR with ACM1 as the anode at 1.5V was up to 95.6%, which was much higher than that for ACM0 (39.3%). Density functional theory (DFT) calculations and experimental results confirmed that h-BN-doping enhanced the adsorption active sites, and adsorption energy, leading to the high performance of EMR for phenol removal. In addition, the equilibrium adsorption capacity of ACM1 (10.2mg/g) was much higher than that of ACM0 (3.7mg/g). The C atoms adjacent to pyridine N in ACM1 were identified as the adsorption and active catalytic sites by X-ray photoelectron spectroscopy (XPS) and DFT calculations. Therefore, this study sheds light on the design and fabrication of conductive carbon membranes for enhanced performance in industrial wastewater treatment.

Highly adsorptive removal of heavy metal, dye, and antibiotic pollutants using functionalized graphene nanosheets sono-electrochemically derived from graphitic waste

The development of highly adsorptive materials at low cost is critically important for efficient treatment of industrial wastewater. We herein report a one-step sonoelectrochemical strategy to synthesize functionalized graphene (FG) nanosheets as an effective adsorptive material using graphite waste from spent household batteries. Scanning/transmission electron and Raman microscopy studies reveal that the as-synthesized nanosheets are composed of few (2–6) graphene layers. Additionally, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses imply the presence of oxygen functional groups on the nanosheets (C=O and -COOH, oxygen content of 4.29%), which are immensely beneficial for the electrostatic adsorption with heavy metals, dyes, and antibiotics in aqueous solutions. As expected, FG nanosheets exhibit potent capabilities of handling a wide range of pollutants, such as methylene blue, methyl orange, enrofloxacin, and Pb2+, with high adsorption performances (99.95% and 21.21mg/g for Enrofloxacin, 98.93% and 119.3mg/g for methylene blue, 95.82% and 25.67mg/g for methyl orange, 95.56% and 86.10mg/g for Pb2+). These findings therefore show a great promise for practical uses of the FG material as efficient adsorbents in eliminating metallic, organic, and antibiotic pollutants in water.

Preparation and Adsorption Studies of Heavy Metal Ions on Magnetic Fe3O4 Hollow Microspheres

Similar to the dilemma faced by developed countries in the past, as China's industrialisation continues to develop, the environmental problems it causes are becoming increasingly serious. In particular, industrial wastewater, which is discharged directly from factories into the surrounding environment, has become the biggest hidden threat to the environment. Therefore, the treatment of industrial wastewater has always been the focus of environmental protection departments and relevant technical personnel. For the human body, heavy metal ions in wastewater are not only highly toxic and easily absorbed, but can also accumulate in organisms through the food chain. Therefore, finding an efficient, inexpensive and simple method to treat heavy metal ions in wastewater is the most urgent issue for scientific research.

By-product Eucalyptus leaves valorization in the basic dye adsorption: kinetic equilibrium and thermodynamic study

Abstract Algerian Eucalyptus Leaves (AEL), a natural biodegradable adsorbent abundantly available, was used for the removal of methylene blue (MB) dye. The AEL properties for the removal of MB were investigated under different conditions by varying the AEL amount, MB concentration, pH of the solution and the reaction temperature. Scanning electron microscopy (SEM) and infrared spectroscopy (FTIR) techniques have been used to characterize AEL biosorbent. Experimental results showed that the adsorption of MB dye at the concentration of 50 mg L−1 reached to 91 % at pH 10 with a stirring speed of 200 rpm and after 180 min of reaction time. The experimental data were analyzed using the linear forms of different kinetic models (pseudo-first order kinetic model, pseudo-second order kinetic model, and intra-particle diffusion models). The results demonstrated that the adsorption kinetics of MB was consistent with the pseudo-second order model with R 2 value of 0.9969. The isotherm models Langmuir, Freundlich, Dubinin, Elovich, Brunaut Emmet Teller and Temkin models were also investigated to describe the adsorption equilibrium. The results show that the AEL adsorption is in accordance with Temkin isotherm. The thermodynamic study revealed that the adsorption is spontaneous and exothermic. Therefore, as a cheap green adsorbent with high MB adsorption performance, AEL is expected to become one of the best candidate materials for future industrial wastewater treatment.

Constituents of Coliform Species Contained in the Permeate of Microfiltration Membranes in Wastewater Treatment

MBRs (Membrane bioreactors) have been increasingly employed for municipal and industrial wastewater treatment in the last decades for their small footprint and excellent effluent quality. However, microorganisms are often detected in the permeates of microfiltration (MF) membranes even with small pore sizes. Coliform bacteria are known for indicating the potential presence of pathogenic bacteria that cause infectious disease such as bacteremia, respiratory tract infections, and urinary tract infections. Thus, the retention of coliform bacteria by membrane processes is important when the membrane process is utilized in water reclamation. In this study, a microbial community of coliform bacteria in the permeates of MF membranes with different pore sizes (0.2, 0.4, and 0.8 µm) was identified. The results showed that the dominant coliform bacteria changed from Enterobacter spp. and Citrobacter spp. in the activated sludge to Enterobacter spp. and Klebsiella spp. in the permeate of MF membranes, while some pieces of membranes showed complete retention. The bacterial regrowth on the surface of the piping system on the permeate side could be a significant factor contributing to the frequent and exclusive detection of Enterobacter spp. and Klebsiella spp. in the case of membranes with small pore size (0.2 and 0.4 µm) after a long continuous filtration time. To indicate the public health-related risk of treated wastewater by MF, Escherichia coli may not be a suitable indicator species because E. coli is relatively retentive in MF compared to other coliforms.

Efficient removal of short-chain perfluoroalkyl substances (PFAS) using asymmetric membrane capacitive deionization

Concerns have been raised over the persistence and potential health risks of perfluoroalkyl substances (PFAS). PFAS pose significant challenges in water treatment owing to their chemical stability and the difficulty of treating them with conventional purification methods. Although traditional water treatment methods for contaminant removal have been explored, their effectiveness against PFAS remains limited. This gap in knowledge highlights the need for innovative approaches. This study introduces asymmetric membrane capacitive deionization (ACDI) as a novel method for short-chain PFAS removal to address the shortcomings of existing techniques. ACDI refers to a configuration in which an anion exchange membrane is removed from a conventional membrane capacitive deionization with both a cation exchange membrane and an anion exchange membrane. Among the PFAS, perfluorobutanesulfonic acid (PFBS), which is known to be difficult to remove because of its short chain, has been the focus. The ACDI system demonstrated superior deionization capacity (28.75 mg/g) and energy efficiency (energy consumption of 0.46 Wh/g) compared to conventional CDI and membrane CDI systems. In addition, the effects of key operating parameters, such as voltage (0.5 ∼ 1.2 V), initial concentration (50 ∼ 500 mg/L), and flow rate (1 ∼ 5 mL/min), on the PFBS removal were systematically investigated and superior at 1.2 V, 500 mg/L, and 2 mL/min. This study suggests the need for further exploration of real-world applications considering the presence of competing ions in wastewater. This study provides valuable insights into advancing CDI technology for the sustainable treatment of industrial wastewater containing PFAS.

Biotic and abiotic factors acting on community assembly in parallel anaerobic digestion systems from a brewery wastewater treatment plant

ABSTRACT Anaerobic digestion is a complex microbial process that mediates the transformation of organic waste into biogas. The performance and stability of anaerobic digesters relies on the structure and function of the microbial community. In this study, we asked whether the deterministic effect of wastewater composition outweighs the effect of reactor configuration on the structure and dynamics of anaerobic digester archaeal and bacterial communities. Biotic and abiotic factors acting on microbial community assembly in two parallel anaerobic digestion systems, an upflow anaerobic sludge blanket digestor (UASB) and a closed digester tank with a solid recycling system (CDSR), from a brewery WWTP were analysed utilizing 16S rDNA and mcrA amplicon sequencing and genome-centric metagenomics. This study confirmed the deterministic effect of the wastewater composition on bacterial community structure, while the archaeal community composition resulted better explained by organic loading rate (ORL) and volatile free acids (VFA). According to the functions assigned to the differentially abundant metagenome-assembled genomes (MAGs) between reactors, CDSR was enriched in genes related to methanol and methylamines methanogenesis, protein degradation, and sulphate and alcohol utilization. Conversely, the UASB reactor was enriched in genes associated with carbohydrate and lipid degradation, as well as amino acid, fatty acid, and propionate fermentation. By comparing interactions derived from the co-occurrence network with predicted metabolic interactions of the prokaryotic communities in both anaerobic digesters, we conclude that the overall community structure is mainly determined by habitat filtering.

Insight into the mechanism of chlorinated nitroaromatic compounds anaerobic reduction with mackinawite (FeS) nanoparticles

Anaerobic biotechnology for wastewaters treatment can nowadays be considered as state of the art methods. Nonetheless, this technology exhibits certain inherent limitations when employed for industrial wastewater treatment, encompassing elevated substrate consumption, diminished electron transfer efficiency, and compromised system stability. To address the above issues, increasing interest is being given to the potential of using conductive non-biological materials, e,g., iron sulfide (FeS), as a readily accessible electron donor and electron shuttle in the biological decontamination process. In this study, Mackinawite nanoparticles (FeS NPs) were studied for their ability to serve as electron donors for p-chloronitrobenzene (p-CNB) anaerobic reduction within a coupled system. This coupled system achieved an impressive p-CNB removal efficiency of 78.3 ± 2.9% at a FeS NPs dosage of 1 mg/L, surpassing the efficiencies of 62.1 ± 1.5% of abiotic and 30.6 ± 1.6% of biotic control systems, respectively. Notably, the coupled system exhibited exclusive formation of aniline (AN), indicating the partial dechlorination of p-CNB. The improvements observed in the coupled system were attributed to the increased activity in the electron transport system (ETS), which enhanced the sludge conductivity and nitroaromatic reductases activity. The analysis of equivalent electron donors confirmed that the S2- ions dominated the anaerobic reduction of p-CNB in the coupled system. However, the anaerobic reduction of p-CNB would be adversely inhibited when the FeS NPs dosage exceeded 5 g/L. In a continuous operation, the p-CNB concentration and HRT were optimized as 125 mg/L and 40 h, respectively, resulting in an outstanding p-CNB removal efficiency exceeding 94.0% after 160 days. During the anaerobic reduction process, as contributed by the predominant bacterium of Thiobacillus with a 6.6% relative abundance, a mass of p-chloroaniline (p-CAN) and AN were generated. Additionally, Desulfomonile was emerged with abundances ranging from 0.3 to 0.7%, which was also beneficial for the reduction of p-CNB to AN. The long-term stable performance of the coupled system highlighted that anaerobic technology mediated by FeS NPs has a promising potential for the treatment of wastewater containing chlorinated nitroaromatic compounds, especially without the aid of organic co-substrates.

A multifunctional device for simultaneous hypersaline wastewater desalination, waste acid-base neutralization, and electricity generation

Industrial wastewater treatment is a pressing global challenge that requires sustainable and energy-efficient solutions. Conventional methods for treating industrial wastewater are often energy-intensive and limited to specific types of wastewater. Therefore, there is a need for innovative approaches that can simultaneously treat multiple types of wastewater while minimizing energy consumption. Herein, we report a circular wastewater-economy approach in which a multifunctional device is utilized to simultaneously treat three types of industrial wastewater (i.e., hypersaline wastewater, waste acid, and waste base). Remarkably, the proposed device exhibits a high salt removal performance (e.g., 87.7% for 80856.39 mg L−1 hypersaline wastewater while 98.8% for natural seawater), along with a significant reduction in acidity/alkalinity of waste acid/base and a decent amount of electricity. The experimental results validate the device performance of treating artificially produced and complex wastewater solutions. It also demonstrates a highly stable operation in continuous flow mode over 100 hours, verifying its potential scalability and long-term stability. The comprehensive theoretical and experimental analyses provide deeper insights into the influence of key properties of ions on the ion transport mechanism and performance. Techno-economic analyses show that the proposed device holds great promise for addressing sustainability challenges associated with industrial wastewater treatment.

Impact of Combined Electrolysis and Activated Sludge Process on Municipal Wastewater Treatment

Electrochemical methods for the treatment of municipal and industrial wastewater are used either independently or in conjunction with biological methods for pretreatment or posttreatment of biologically treated wastewater. In our work, the combination of these processes was studied, where pre-electrolysis was used to produce dissolved iron before the activation process. Electrolysis was also directly introduced into the activation using either iron or carbon electrodes. The surface of one iron electrode was 32.2 cm2, voltage at the electrodes was 21 V, and current was 270 mA. The surface of one carbon electrode was 7.54 cm2, current was 82.5 mA, and voltage at the electrodes was 21 V. Laboratory research on synthetic municipal wastewater treatment using a combination of electrolysis and activation processes showed that the use of iron electrodes increases the efficiency of phosphorus removal compared to its precipitation with iron salts. Electrolysis has shown a positive effect on the sedimentation properties of sludge and the destruction of filamentous microorganisms. Even though it negatively affected the respiration rates of activated sludge and the denitrification efficiency, it did not have a negative impact on the nitrification activity of sludge.

Ultrafast dyeing wastewater purification by high-performance and reusable lignin-derived activated porous carbon filter

Achieving ultrafast purification during filtration while maintaining high adsorption capacity and low-cost filter production is a critical challenge that must be addressed immediately to promote large-scale water filter applications, particularly in remote areas without wastewater purification plants. Herein, low-cost, renewable lignin was used as a carbon source precursor to produce a high-performance, reusable activated porous carbon filter for ultrafast dye wastewater purification. Lignin-derived active porous carbon (LAPC) can achieve a high specific surface area (2276 m2/g) by using a lower amount of KOH (a mass ratio of 0.4 KOH to precursor) during the activation process, which not only meets the requirements of water transport and dye adsorption, but also reduces manufacturing costs. Owing to the pore-filling effect and electrostatic interaction, the LAPC particles displayed a high removal capacity of 1800 mg/g in the static adsorption, higher than most of the reported porous carbon. Furthermore, LAPC filters assembled from a flow of LAPC particles achieve significant dye removal (99.82 % in 30 s) during the dynamic adsorption process. Both anionic and cationic dyes can be removed and clean water can be produced simultaneously by simple dynamic filtration. Moreover, the LAPC filter could be reused for wastewater purification with a high removal efficiency (more than 95 % after 7 cycles of regeneration and use). This continuous operation, strong absorption versatility, and high efficiency of LAPC filter device for complex hybrid dyes system make it have a bright prospect in industrial dyeing wastewater treatment fields.