Transmission Electron Microscopy Analysis Research Articles

Exosomes enriched by miR-429-3p derived from ITGB1 modified Telocytes alleviates hypoxia-induced pulmonary arterial hypertension through regulating Rac1 expression.

Recent studies have emphasized the critical role of Telocytes (TCs)-derived exosomes in organ tissue injury and repair. Our previous research showed a significant increase in ITGB1 within TCs. Pulmonary Arterial Hypertension (PAH) is marked by a loss of microvessel regeneration and progressive vascular remodeling. This study aims to investigate whether exosomes derived from ITGB1-modified TCs (ITGB1-Exo) could mitigate PAH. We analyzed differentially expressed microRNAs (DEmiRs) in TCs using Affymetrix Genechip miRNA 4.0 arrays. Exosomes isolated from TC culture supernatants were verified through transmission electron microscopy and Nanoparticle Tracking Analysis. The impact of miR-429-3p-enriched exosomes (Exo-ITGB1) on hypoxia-induced pulmonary arterial smooth muscle cells (PASMCs) was evaluated using CCK-8, transwell assay, and inflammatory factor analysis. A four-week hypoxia-induced mouse model of PAH was constructed, and H&E staining, along with Immunofluorescence staining, were employed to assess PAH progression. Forty-five miRNAs exhibited significant differential expression in TCs following ITGB1 knockdown. Mus-miR-429-3p, significantly upregulated in ITGB1-overexpressing TCs and in ITGB1-modified TC-derived exosomes, was selected for further investigation. Exo-ITGB1 notably inhibited the migration, proliferation, and inflammation of PASMCs by targeting Rac1. Overexpressing Rac1 partly counteracted Exo-ITGB1's effects. In vivo administration of Exo-ITGB1 effectively reduced pulmonary vascular remodeling and inflammation. Our findings reveal that ITGB1-modified TC-derived exosomes exert anti-inflammatory effects and reverse vascular remodeling through the miR-429-3p/Rac1 axis. This provides potential therapeutic strategies for PAH treatment.

Prediction of severe preeclampsia and intrauterine growth restriction based on serum placental exosome miR-520a-5p levels during the first-trimester.

To assess the predictive capabilities of serum exosomal levels of micro-RNA-520a-5p (miR-520a-5p) concerning the occurrence of severe preeclampsia (sPE) and fetal growth restriction (FGR) during the first trimester of pregnancy. During the period spanning from October 2020 to October 2021, serum samples were procured from the first trimester and subsequently preserved by freezing at -80 ℃. These samples were obtained from 105 pregnant women in a nested case-control study. This cohort consisted of individuals who later developed sPE (sPE group, n = 35) and FGR (FGR group, n = 35) during the third trimester. Additionally, 35 women with normal blood pressure were denoted as normal pregnancy group. Serum samples from the first trimester were retrieved from all groups for further analysis after thawing. Exosomes were extracted from the serum samples collected during the first trimester and examined using transmission electron microscopy, western blot, and nanoparticle tracking analysis. Additionally, the determination of their placental origin was also established during the course of the study. Exosome miR-520a-5p levels were measured using real-time quantitative polymerase chain reaction assays, primarily involving quantitative reverse transcription polymerase chain reactions. Fetal placental tissues from the 3 groups were collected shortly after birth, and miR-520a-5p expression was measured using real-time quantitative polymerase chain reaction. Serum placental exosomes and fetal placental tissues were compared for miR-520a-5p levels. Placental trophoblasts were identified as the source of serum exosomes in all 3 groups. It was found that serum placental exosomes exhibited lower levels of miR-520a-5p in both the sPE and FGR groups when compared to the normal pregnancy group. This finding was consistent with observations made in postpartum placental tissues. The predictive accuracy for sPE using miR-520a-5p levels in serum placental exosomes during the first trimester was notably higher (area under the receiver operating characteristic curve = 0.806, P <.05) compared to the prediction of FGR (area under the receiver operating characteristic curve = 0.628, P <.05). Placenta-derived exosomes can be extracted from maternal serum during the first trimester of pregnancy and miR-520a-5p detected from the exosomes. The downregulation of miR-520a-5p serves as a more predictive indicator for the subsequent development of sPE compared to predicting FGR.

Transmission Electron Microscopic and X-ray Diffraction Based Study of Crystallographic Bibliography Demonstrated on Silver, Copper and Titanium Nanocrystals: State of the Art Statical Review

This statistical review compares the crystallographic structures of functional nanocrystals composed of silver (Ag), copper (Cu) and titanium (Ti) using transmission electron microscopy (TEM) and X-ray diffraction (XRD) analyses. TEM provides high-resolution imaging to directly visualize individual nanoparticles' size, internal shape and crystallinity. Statistical analysis quantifies variations in lattice parameters, crystal structure, size distributions, phase compositions, lattice strains, preferred orientation and lattice volume of these three crystalline nanomaterials. The review highlights the complementary roles of TEM and XRD in comprehensive Ag, Cu and Ti nanocrystalline materials characterization. The crystallographic functional parameters of Ag were 2θ= 38.1° (111), 44.3° (200) and 64.4° (220); for Cu crystal 43.3° (111), 50.4° (200), 74.1° (220), 89.9° (311) and 95.1° (222) and 35.1° (100), 38.4° (002), 40.2° (101), 53.0° (102), 63.0° (103), 70.7° (110), 76.2° (112), 82.3° (201) demonstrated for Ti nanocrystals. The crystallographic predominant plane or Miller indices were also revealed by selected area electron diffraction (SAED) on TEM. The FCC structure of Ag and Cu is shown in larger lattice volumes compared to the HCP structure of Ti and prefer oriented. The degree of crystallinity of Ti, Cu and Ag nanocrystalline materials was observed at 90.0%, 98.0% and 100.0% respectively. This quantitative comparison provides valuable insights into the structural property relationships in these nanocrystals, enabling rational design strategies for optimizing their performance in various functional applications.

Enhancing the combustion of nAl with AlF3 coating: gas-solid reaction mechanism for reducing combustion agglomeration of Al powder.

The combustion agglomeration of nano-aluminum (nAl) powder leads to incomplete combustion, which seriously hinders its application as metal fuel. In this work, nAl@AlF3 composites were produced by coating nAl with AlF3via a facile chemical deposition method. TEM and SEM analyses indicated that the AlF3 layer was evenly coated on the surface of nAl with a thickness of 4.6-9.1 nm, thereby varying the quantity of AlF3 applied. Experimental results from combustion indicated that the prepared nAl@AlF3 composites exhibit superior combustion efficiency, a higher combustion rate, and reduced combustion agglomeration as compared to raw nAl. Contrary to the widely accepted explanation that volatilization of AlF3 hinders Al combustion agglomeration, we proved that the gas-solid reaction between nAl and AlF3 plays an important role in inhibiting the sintering of nAl particles produced. The gaseous intermediate (i.e., AlOF and HF) released from the hydrolysis of AlF3 could reduce the diffusion barrier of Al2O3 to facilitate the reaction of Al core, which enhances the combustion reaction kinetics. More importantly, these gaseous products actively participate in the reaction cycle to continuously exert their catalytic effects.

Investigation on electrochemical corrosion behavior and mechanical properties of Fe-nano particles produced by high-energy ball milling technique

Abstract This study focuses on converting iron particles from grinding sludge, after removing impurities, into Fe-nanoparticles using high-energy ball billing. The goal is to examine the corrosion behaviors and mechanical properties of these Fe-nanoparticles. Nanostructured Fe-powder was synthesized through a process involving 10 h of high-energy ball milling, followed by conventional hot pressing and sintering. Structural and microstructural properties were thoroughly examined using techniques such as X-ray diffraction (XRD), optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and elemental diffraction spectroscopy. Upon sintering, SEM and TEM analyses unveiled the formation of a nanostructured alloy within the samples. Notably, the milled sample exhibited high hardness value, measuring at 155 HV. However, it is noteworthy that the un-milled sample demonstrated superior compression strength compared to its milled counterpart. Furthermore, the corrosion behavior of the samples was evaluated through electrochemical corrosion studies. Interestingly, the sample subjected to 10 h of milling (coin number 5) displayed a significantly lower corrosion rate, measuring at 1.3921 mm/year, suggesting enhanced corrosion resistance attributed to the nano structuring process.

Employing Thermal Oxidation and Through-Silicon Via Technologies in CuO-Based Sensors for Room-Temperature NO2 Detection

Abstract We present the development and characterization of room-temperature CuO gas sensor fabricated through a thermal oxidation process complemented by a through-silicon via (TSV) structure. The TSV structure is a tapered hole with the top width measuring approximately 190 um and narrowing to 103 um at the bottom. The CuO film serves as the sensing material, with its predominant (111) orientation confirmed through X-ray diffraction analysis. Transmission electron microscopy analysis indicated lattice spacing of 0.23 nm within the CuO samples, corresponding to the (111) plane. Sensor performance was evaluated at a room temperature of 25°C, showing response rates of 19.3%, 34.6%, 39.3 %, and 46.3 % to NO2 concentrations of 0.5, 1, 2, and 5 ppm, respectively. Stability testing of the sensor at 1 ppm NO2 concentration across five cycles demonstrated a consistent response around 34.6 % with a deviation of less than 2%. The CuO material exhibited enhanced selectivity for NO2 over other gases such as NH3, CO2, CO, H2, H2S, and SO2.

Hypoxic adipose stem cell-derived exosomes carrying high-abundant USP22 facilitate cutaneous wound healing through stabilizing HIF-1α and upregulating lncRNA H19.

Hypoxic preconditioning has been recognized as a promotive factor for accelerating cutaneous wound healing. Our previous study uncovered that exosomal lncRNA H19, derived from adipose-derived stem cells (ADSCs), plays a crucial role in orchestrating cutaneous wound healing. Herein, we aimed to explore whether there is a connection between hypoxia and ADSC-derived exosomes (ADSCs-exos) in cutaneous wound healing. Exosomes extracted from ADSCs under normoxic and hypoxic conditions were identified using transmission electron microscope (TEM) and particle size analysis. The effects of ADSCs-exos on the proliferation, migration, and angiogenesis of human umbilical vein endothelial cells (HUVECs) were evaluated by CCK-8, EdU, wound healing, and tube formation assays. Expression patterns of H19, HIF-1α, and USP22 were measured. Co-immunoprecipitation, chromatin immunoprecipitation, ubiquitination, and luciferase reporter assays were conducted to confirm the USP22/HIF-1α/H19 axis, which was further validated in a mice model of skin wound. Exosomes extracted from hypoxia-treated ADSCs (termed as H-ADSCs-exos) significantly increased cell proliferation, migration, and angiogenesis in H2O2-exposed HUVECs, and promoted cutaneous wound healing invivo. Moreover, H-ADSCs and H-ADSCs-exos, which exhibited higher levels of H19, were found to be transcriptionally activated by HIF-1α. Mechanically, H-ADSCs carrying USP22 accounted for deubiquitinating and stabilizing HIF-1α. Additionally, H-ADSCs-exos improved cell proliferation, migration, and angiogenesis in H2O2-triggered HUVECs by activating USP22/HIF-1α axis and promoting H19 expression, which may provide a new clue for the clinical treatment of cutaneous wound healing.

Biogenic silver nanoparticle synthesis using orange peel extract and its multifaceted biomedical application.

The aim of this study was to employ an agro-industrial byproduct, specifically Citrus sinensis peels, as a reservoir of polyphenols. The natural chemicals present in C. sinensis peels serve as reducing agents in an environmentally benign method for synthesizing silver nanoparticles (AgNPs). This methodology not only provides a more environmentally friendly method for synthesizing nanoparticles but also enhances the value of agricultural waste, emphasizing the sustainable utilization of resources. In our study, AgNPs were successfully synthesized using peel aqueous exact of C. sinensis and then their various biological activity has been investigated. The synthesized AgNPs were characterized by UV-vis spectroscopy, dynamic light scattering (DLS), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and transmission electron microscopy (TEM) analysis. Furthermore, their effectiveness in inhibiting growth and biofilm formation of Escherichia coli, Staphylococcus aureus, and Candida albicans has been investigated. The minimum inhibitory concentrations (MIC) for E. coli and S. aureus were both 32μg/mL, and for C. albicans, it was 128µg/mL. At 250µg/mL of AgNPs, 94% and 92% biofilm inhibition were observed against E. coli and S. aureus, respectively. Furthermore, AgNPs demonstrated significant toxic effects against human prostate cancer cell line DU145 as investigated by anti-apoptotic, 4',6-diamidino-2-phenylindole (DAPI), reactive oxygen species (ROS), and acridine orange/ethidium bromide (AO/EtBr) assays. We also conducted uptake analysis on these pathogens and cancer cell lines to preliminarily investigate the mechanisms underlying their toxic effects. These findings confirm that AgNPs can serve as a cost-effective, non-toxic, and environmentally friendly resource for green synthesis of medicinal AgNPs. Moreover, this approach offers an alternative recycling strategy that contributes to the sustainable use of biological by-products.

Discovery of the Lysosome-Inhibiting Function of Acremolactone B

Lysosome inhibitors have garnered considerable interest for their utility in lysosome biology research and potential therapeutic applications. We discovered the lysosome-inhibiting function of acremolactone B (1), a scarce azaphilone-type polyketide, leveraging our previous scalable synthesis. This compound significantly reduces lysosomal acidity and impairs the maturation of the lysosomal protease cathepsin D (CTSD) in triple-negative breast cancer cells (MDA-MB-231) and human lung cancer cells (A549). Furthermore, we found that compound 1 suppresses downstream autophagy, as revealed by monitoring autophagic flux and conducting transmission electron microscopy (TEM) analysis. This study unveils the previously unrecognized biological role of 1 and introduces a new scaffold for lysosome inhibitors.

Green Valorization of Waste Plastics to Graphene as an Upcycled Eco-Friendly Material for Advanced Gas Sensing

The valorization technique successfully transformed waste polyethylene terephthalate (PET) into valuable carbon nanomaterial (CN)/graphene, while doped and undoped ZnO nanopowders were synthesized via sol–gel methods. Utilizing XRD, BET, TEM, EDX, FTIR, and TGA analyses, the synthesis of sp2 2D sheet, pristine, and doped ZnO nanostructures was confirmed. Solid-state gas sensor devices, tested under 51% relative humidity (RH), 30 °C ambient temperature, and 0.2 flow rate, exhibited a 3.4% enhanced response to H2 gas compared to CO2 at 50 ppm concentrations over time. Notably, the ZnO/CN sensor surpassed CN and ZnO alone, attributed to CN dopant integration with decreasing order of response performance as ZnO/CN &gt; CN &gt; ZnO. This study underscores the efficacy of valorization techniques in generating high-value carbon nanomaterials and their efficacy in bolstering gas sensor performance, with ZnO/CN demonstrating superior response capabilities.

Silver Nanoparticles Encapped by Dihydromyricetin: Optimization of Green Synthesis, Characterization, Toxicity, and Anti-MRSA Infection Activities for Zebrafish (Danio rerio)

To achieve the environmentally friendly and rapid green synthesis of efficient and stable AgNPs for drug-resistant bacterial infection, this study optimized the green synthesis process of silver nanoparticles (AgNPs) using Dihydromyricetin (DMY). Then, we assessed the impact of AgNPs on zebrafish embryo development, as well as their therapeutic efficacy on zebrafish infected with Methicillin-resistant Staphylococcus aureus (MRSA). Transmission electron microscopy (TEM) and dynamic light-scattering (DLS) analyses revealed that AgNPs possessed an average size of 23.6 nm, a polymer dispersity index (PDI) of 0.197 ± 0.0196, and a zeta potential of −18.1 ± 1.18 mV. Compared to other published green synthesis products, the optimized DMY-AgNPs exhibited smaller sizes, narrower size distributions, and enhanced stability. Furthermore, the minimum concentration of DMY-AgNPs required to affect zebrafish hatching and survival was determined to be 25.0 μg/mL, indicating the low toxicity of DMY-AgNPs. Following a 5-day feeding regimen with DMY-AgNP-containing food, significant improvements were observed in the recovery of the gills, intestines, and livers in MRSA-infected zebrafish. These results suggested that optimized DMY-AgNPs hold promise for application in aquacultures and offer potential for further clinical use against drug-resistant bacteria.

Synthesis and characterization of alumina supported molybdosilicic acid (SiMo12/Al2O3): Efficient solid acid catalyst for the synthesis of pyranopyrazole derivatives

A series of highly reusable heterogeneous catalysts (10-40 wt.% SiMo12/Al2O3), consisting of molybdosilicic acid (SiMo12) impregnated on alumina (Al2O3) support was synthesized by the wetness impregnation method. The physicochemical properties of synthesized catalyst were studied using FT-IR, XRD, SEM, EDX, TEM, BET and TG-DTA analysis techniques. The study proves that the synthesized SiMo12 catalyst efficiently incorporated on the surface of Al2O3. The catalytic activity of prepared catalyst was investigated for the synthesis of pyranopyrazole(6-amino-4-phenyl-3-methyl-2,4-dihydropyrano[2,3-c]pyrazole-5carbonitrile) via cyclocondensation reaction of aldehydes, malononitrile, hydrazine hydrate and ethyl-acetoacetate under solvent-free conditions. Among different catalysts, 30% SiMo12 supported on to Al2O3 showed the highest catalytic activity. High yield, shorter reaction time, operational simplicity, solvent-free conditions and reusability of the catalyst are the distinct features of this protocol.

Reinforced MOF/polymer composite based on a copper metal-organic framework supported on nanoporous hyper cross-linked polycalix[4]resorcinarene for the preparation of phthalazine and 4H-pyran heterocycles

The present study has aimed to prepare a novel MOF/polymer composite called PC4RA@PrSi-CA/Cu-MOF to take benefit from the advantages of both Cu-based metal-organic framework (Cu-MOF) and porous polymer based on Cis-calix[4]resorcinarene (PC4RA). Various processes, including preparation of a 3D network of polycalix, modification of polycalix with (3-aminopropyl)trimethoxysilan (APTMS) and citric anhydride (CA), and functionalization of the modified polymer with Cu-MOF nanostructure, respectively, were used for synthesizing MOF/polymer composite. Next, the characterization and confirmation of the polymer-supported Cu-MOF were analyzed using FT-IR, EDS-Mapping, STA, PXRD, FE-SEM, and TEM techniques. In the continuation, two types of heterocycles, including phthalazines and 4H-pyrans, were synthesized to reveal the efficiency of the PC4RA@PrSi-CA/Cu-MOF nanocomposite. The catalyst showed a reasonable performance by providing a satisfactory yield of the desired products (90–99 %) during a short time (8–20 min) under mild and green conditions (50 °C in H2O). Furthermore, the structure of the heterocycles was validated using FT-IR, 1H/13C NMR. Then, the catalyst was successively reused ten times in the model reaction and studied using FT-IR, EDX, TEM, and elemental mapping analyses to demonstrate the catalyst stability in recoverability. According to the results, this heterogenized catalyst can recover several times without a notable drop in stability and activity.

Green Synthesis and Characterization of Silver Anchored ZnO Nanoparticle as the Antimicrobial Reinforcement for Polylactide (PLA) Films

AbstractThe aqueous extract of endophytic fungi (Periconia sp.) was effectively used as a reducing agent to anchor Ag nanoparticles on the ZnO surface. The XRD, UV‐Vis, SEM‐EDX and TEM analyses were performed to ensure the formation of AgNP@ZnO architecture. TEM analysis confirmed that the 4‐20 nm sized Ag nanoparticles were anchored evenly on the surface of ZnO with 16‐78 nm in size. The antimicrobial study showed the superior performance of AgNP@ZnO functional nanoparticles than the pristine ZnO against pathogenic bacteria Staphylococcus aureus (gram‐positive) and Escherichia coli (gram‐negative). Hence, AgNP@ZnO functional particles were effectively explored as antimicrobial reinforcement for fabricating composite films using polylactic acid (PLA) as a matrix. The obtained nanocomposite films showed excellent antibacterial activity, which increases with increasing AgNP@ZnO loading.This article is protected by copyright. All rights reserved.

Enhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8

Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal–organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20–50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+‏.

Lipid turnover through lipophagy in the newly identified extremophilic green microalga Chlamydomonas urium.

Autophagy is a central degradative pathway highly conserved among eukaryotes, including microalgae, which remains unexplored in extremophilic organisms. In this study, we described and characterized autophagy in the newly identified extremophilic green microalga Chlamydomonas urium, which was isolated from an acidic environment. The nuclear genome of C. urium was sequenced, assembled and annotated in order to identify autophagy-related genes. Transmission electron microscopy, immunoblotting, metabolomic and photosynthetic analyses were performed to investigate autophagy in this extremophilic microalga. The analysis of the C. urium genome revealed the conservation of core autophagy-related genes. We investigated the role of autophagy in C. urium by blocking autophagic flux with the vacuolar ATPase inhibitor concanamycin A. Our results indicated that inhibition of autophagic flux in this microalga resulted in a pronounced accumulation of triacylglycerols and lipid droplets (LDs). Metabolomic and photosynthetic analyses indicated that C. urium cells with impaired vacuolar function maintained an active metabolism. Such effects were not observed in the neutrophilic microalga Chlamydomonas reinhardtii. Inhibition of autophagic flux in C. urium uncovered an active recycling of LDs through lipophagy, a selective autophagy pathway for lipid turnover. This study provided the metabolic basis by which extremophilic algae are able to catabolize lipids in the vacuole.

Judd–Ofelt Intensity Parameters and Optical Properties of Eu/Li Co‐Doped CeO2 Phosphor

AbstractIn this work, the intense orange‐red emission of Eu3+ singly and Eu3+/Li+ co‐doped CeO2 phosphors synthesized by solution combustion using urea as fuel was investigated experimentally and theoretycally. X‐ray diffraction and high‐resolution transmission electron microscope analysis confirmed the formation of a single‐phase CeO2 cubic with high crystallinity. Under 360 nm excitation, the phosphors emitted an intense orange–red region of Eu3+ as a function of Li+ doping content. Significantly, it was enhanced 12/10 times by Li+ co‐doping due to the increased crystallinity of the host lattice. The energy transfer proccesse associated with cross‐relaxation is responsible for decreasing the experimental lifetime of Eu3+. The influence of Li+ doping content on the characterization properties of CeO2:Eu, Li phosphors was further explained using Judd‐Ofelt (J−O) theory, from which branching ratios (βr), transition probability (A), radiative lifetime (τcal), and stimulated cross‐section (σe) emission of the phosphors were estimated. The results indicate that an effectively improved crystallinity by Li+ co‐doped CeO2:Eu can significantly enhance its luminescence intensity, making it suitable for optoelectronic and display applications.

CO2-Based Stable Porous Metal-Organic Frameworks for CO2 Utilization.

The transformation of carbon dioxide (CO2) into functional materials has garnered considerable worldwide interest. Metal-organic frameworks (MOFs), as a distinctive class of materials, have made great contributions to CO2 capture and conversion. However, facile conversion of CO2 to stable porous MOFs for CO2 utilization remains unexplored. Herein, we present a facile methodology of using CO2 to synthesize stable zirconium-based MOFs. Two zirconium-based MOFs CO2-Zr-DEP and CO2-Zr-DEDP with face-centered cubic topology were obtained via a sequential desilylation-carboxylation-coordination reaction. The MOFs exhibit excellent crystallinity, as verified through powder X-ray diffraction and high-resolution transmission electron microscopy analyses. They also have notable porosity with high surface area (SBET up to 3688 m2 g-1) and good CO2 adsorption capacity (up to 12.5 wt %). The resulting MOFs have abundant alkyne functional moieties, confirmed through 13C cross-polarization/magic angle spinning nuclear magnetic resonance and Fourier transform infrared spectra. Leveraging the catalytic prowess of Ag(I) in diverse CO2-involved reactions, we incorporated Ag(I) into zirconium-based MOFs, capitalizing on their interactions with carbon-carbon π-bonds of alkynes, thereby forming a heterogeneous catalyst. This catalyst demonstrates outstanding efficiency in catalyzing the conversion of CO2 and propargylic alcohols into cyclic carbonates, achieving >99% yield at room temperature and atmospheric pressure conditions. Thus, this work provides a dual CO2 utilization strategy, encompassing the synthesis of CO2-based MOFs (20-24 wt % from CO2) and their subsequent application in CO2 capture and conversion processes. This approach significantly enhances overall CO2 utilization.

Impact of Plant Extract Phytochemicals on the Synthesis of Silver Nanoparticles

This work aims to analyze the influence of selected plants on the synthesis of silver nanoparticles (AgNPs). Six plants were chosen for the experiment, from which extracts were prepared: maclura fruit, spruce and ginkgo needles, green algae (Ch. kessleri), and mushrooms, namely Collybia nuda, and Macrolepiota procera. The composition of the extracts and colloids after preparation of the nanoparticles was analyzed using FTIR analysis. The composition of the extracts affected not only the rate of the synthesis but also the shape of the nanoparticles. TEM analysis confirmed the synthesis of mainly spherical nanoparticles (size range: 10–25 nm). However, triangular prisms and polyhedral nanoparticles synthesized by the extracts containing mainly flavonoids, terpenes, and phenols (the main compounds of resins) were also confirmed. EDS analysis was used to analyze the composition of the nanoparticles. It was proven that by choosing the right plant extract and using the appropriate technology with extract treatment, it is possible to prepare nanoparticles of different shapes.

Zn-Doped MnO2 microflake pseudocapacitive cathode on Ni(OH)2/Ni-Foam substrate as a promising charge storage material

Zn-doped MnO2 microflakes cathode material on Ni(OH)2/Ni foam has been synthesized and characterized as well as tested its electrochemical performances in 3 M KOH solution. The present work varies the amounts of Zn dopant in MnO2 system to improve its capability in energy storage. Material identification has been simply confirmed with XRD, SEM, TEM, and XPS analysis. It is expected the Zn dopant will induce surface defects such as ZnMn2- or ZnMn0 and oxygen vacancy, leading to enhanced charge storage efficiency. In addition, XPS analysis reveals the existence of positively charged oxygen vacancy and the surface charge of ZnMn2- or ZnMn0 induce different surface oxidation states of Mn2+ and Mn4+. The oxidation states of Mn could accommodate the redox reactions involving ion adsorption and intercalation during pseudocapacitive charge and discharge processes. Substituting Zn into Mn sites is optimized with MnZn-1.5 which reaches a specific capacitance of 1601F/g at a 0.4 VAg/AgCl in KOH solution. This work demonstrates a promising material system for supercapacitor applications using Zn doping with a simple preparation process to support a large-scale application.