Transition State Research Articles

Two co-existing and opposing mechanisms of proton transfer in one-dimensional open-end water chains.

The proton transport in one-dimensional (1D) confined water chains has been extensively studied as a model for ion channels in cell membrane and fuel cell. However, the mechanistic understanding of the proton transfer (PT) process in 1D water chains remains incomplete. In this study, we demonstrate that the two limiting structures of the hydrated excess proton, H5O2+ (Zundel) and H3O+ (linear H7O3+), undergo a change in dominance as the water chain grows, causing two co-existing and opposing PT mechanisms. Specifically, H5O2+ is stable in the middle of the chain, whereas H3O+ serves as a transition state (TS). Except for this region, H3O+ is stabilized while H5O2+ serves as a TS. The interaction analysis shows that the electrostatic interaction plays a crucial role in the difference in PT mechanisms. Our work fills a knowledge gap between the various PT mechanisms reported in bulk water and long 1D water chains, contributing to a deeper understanding of biological ion channels at the atomic level.

DFT Calculations Rationalize Unconventional Regioselectivity in PdII-Catalyzed Defluorinative Alkylation of gem-Difluorocyclopropanes with Hydrazones.

Density functional theory (DFT) calculations have been conducted to gain insight into the unique formation of the branched alkylation product in the PdII-catalyzed defluorinative alkylation of gem-difluorocyclopropanes with hydrazones. The reaction is established to occur in sequence through oxidative addition, β-F elimination, η1-η3 isomerization, transmetalation, η3-η1 isomerization, 3,3'-reductive elimination, deprotonation/N2 extrusion, and proton abstraction. The rate-determining step of the reaction is identified as the β-F elimination, featuring an energy barrier of 28.6 kcal/mol. The 3,3'-reductive elimination transition states are the regioselectivity-determining transition states. The favorable noncovalent π-π interaction between the naphthyl group of gem-difluorocyclopropane and the phenyl group of hydrazone is found to be mainly responsible for the observed regioselectivity.

Facile Access to Organostibines via Selective Organic Superbase Catalyzed Antimony-Carbon Protonolysis.

The selective formation of antimony-carbon bonds via organic superbase catalysis under metal- and salt-free conditions is reported. This novel approach utilizes electron-deficient stibine, Sb(C6F5)3, to give upon base-catalyzed reactions with weakly acidic aromatic and heteroaromatic hydrocarbons access to a range of new aromatic and heteroaromatic stibines, respectively, with loss of C6HF5. Also, the significantly less electron-deficient stibines, Ph2SbC6F5 and PhSb(C6F5)2 smoothly underwent base-catalyzed exchange reactions with a range of terminal alkynes to generate the stibines of formulae PhSb(C≡CPh)2, and Ph2SbC≡CR [R = C6H5, C6H4-NO2, COOEt, CH2Cl, CH2NEt2, CH2OSiMe3, Sb(C6H5)2], respectively. These formal substitution reactions proceed with high selectivity as only the C6F5 groups serve as a leaving group to be liberated as C6HF5 upon formal proton transfer from the alkyne. Kinetic studies of the base-catalyzed reaction of Ph2SbC6F5 with phenyl acetylene to form Ph2SbC≡CPh and C6HF5 suggested the empirical rate law to exhibit a first-order dependence with respect to the base catalyst, alkyne and stibine. DFT calculations support a pathway proceeding via a concerted σ-bond metathesis transition state, where the base catalyst activates the Sb-C6F5 bond sequence through secondary bond interactions.

Mechanistic insights into the role of cyclodextrin in the regioselective radical CH trifluoromethylation of aromatic compounds.

The regioselective radical CH trifluoromethylation of aromatic compounds have been shown to proceed in good yield and high regioselectivity when cyclodextrin (CD) is present. Yet, the reaction mechanism and the role of CD during the reaction have remained obscure. To this end, here we performed density functional theory (DFT) calculations to the conformations obtained by semiempirical quantum mechanical molecular dynamics calculations to reveal the reaction mechanism and the role of CD in controlling regioselectivity. The results show that metal salt increases the yield but do not affect the regioselectivity, which we further confirmed by an experiment. In contrast, multiple CD-substrate complex conformations and reaction pathways were obtained, and CD was shown to contribute to improving the regioselectivity by stabilizing the intermediate state via encapsulation. The present study indicates that CDs can increase the regioselectivity by stabilizing the intermediate and product states while only marginally affecting the transition state.

Generating High-Precision Force Fields for Molecular Dynamics Simulations to Study Chemical Reaction Mechanisms Using Molecular Configuration Transformer.

Theoretical studies on chemical reaction mechanisms have been crucial in organic chemistry. Traditionally, calculating the manually constructed molecular conformations of transition states for chemical reactions using quantum chemical calculations is the most commonly used method. However, this way is heavily dependent on individual experience and chemical intuition. In our previous study, we proposed a research paradigm that used enhanced sampling in molecular dynamics simulations to study chemical reactions. This approach can directly simulate the entire process of a chemical reaction. However, the computational speed limited the use of high-precision potential energy functions for simulations. To address this issue, we presented a scheme for training high-precision force fields for molecular modeling using a previously developed graph-neural-network-based molecular model, molecular configuration transformer. This potential energy function allowed for highly accurate simulations at a low computational cost, leading to more precise calculations of the mechanism of chemical reactions. We applied this approach to study a Claisen rearrangement reaction and a carbonyl insertion reaction catalyzed by manganese.

Structural diversity of decalin forming Diels-Alderase.

The Diels-Alder (DA) reaction, specifically referring to the [4+2] cycloaddition reaction in pericyclic reactions, is a process that forms two carbon-carbon covalent bonds in a single step via an electron ring transition state. Among the secondary metabolites produced by microorganisms, numerous compounds are biosynthesized through DA reactions, most of which are enzymatic. Our research group has discovered an enzyme named Diels-Alderase (DAase) that catalyzes the DA reaction in filamentous fungi, and we have been investigating its catalytic mechanism. This review describes the reported microbial DAase enzymes, with a particular focus on those involved in the construction of the decalin ring.

Two distinct regulatory systems control pulcherrimin biosynthesis in Bacillus subtilis.

Regulation of transcription is a fundamental process that allows bacteria to respond to external stimuli with appropriate timing and magnitude of response. In the soil bacterium Bacillus subtilis, transcriptional regulation is at the core of developmental processes needed for cell survival. Gene expression in cells transitioning from exponential phase to stationary phase is under the control of a group of transcription factors called transition state regulators (TSRs). TSRs influence numerous developmental processes including the decision between biofilm formation and motility, genetic competence, and sporulation, but the extent to which TSRs influence bacterial physiology remains to be fully elucidated. Here, we demonstrate two TSRs, ScoC and AbrB, along with the MarR-family transcription factor PchR negatively regulate production of the iron chelator pulcherrimin in B. subtilis. Genetic analysis of the relationship between the three transcription factors indicate that all are necessary to limit pulcherrimin production during exponential phase and influence the rate and total amount of pulcherrimin produced. Similarly, expression of the pulcherrimin biosynthesis gene yvmC was found to be under control of ScoC, AbrB, and PchR and correlated with the amount of pulcherrimin produced by each background. Lastly, our in vitro data indicate a weak direct role for ScoC in controlling pulcherrimin production along with AbrB and PchR. The layered regulation by two distinct regulatory systems underscores the important, role for pulcherrimin in B. subtilis physiology.

Substituent Effects on the Equilibria between Cyclopropylcarbinyl, Bicyclobutonium, Homoallyl, and Cyclobutyl Cations.

The cyclopropylcarbinyl (CPC) and bicyclobutonium (BCB) structures of the C4H7+ cation have been proposed as intermediates in various reactions forming cyclopropylcarbinyl, cyclobutyl, or homoallyl products. While these cations can react with nucleophiles stereospecifically, in each system there are usually multiple BCB/CPC cations in equilibrium with related cyclobutyl (CB) and homoallyl (HA) cations, from which stereospecificity is jeopardized. Using density functional theory (DFT) and DLPNO-CCSD(T) calculations, we studied the electronic and steric effects on the equilibria between mono- and polysubstituted C4H7+ cations. We find that the shapes of the potential energy surfaces (PESs) vary significantly, with structures that are minima for a given substituent becoming high-energy transition structures for another. Electron-donating groups at C1, C2, or C3/C4 positions favor CPC, BCB/CB, and HA structures, respectively. Electron-withdrawing groups yield shallower PESs where multiple related structures are energetically accessible. Strong Hammett correlations (σ+) are observed for the substituent effects, which appear to be additive. In addition, BCB cations with more substituents are energetically destabilized compared to CPC cations, except with donating substituents at the C2 position. This work allows predictions of the major structures expected in mixtures of CPC/BCB/CB/HA cations for given substituent patterns, and of the major products produced from such cations.

Kinetics and mechanism of the gas-phase reaction of the hydroxyl radical with meta-aminotoluene compound.

An ab initio investigation into the potential energy landscape of the meta-aminotoluene + •OHreaction has been conducted in this study. The calculated results reveal that the reaction channel leading to the product (NHC6H4CH3 + H2O) prevails under the 300-1700K temperature range, while the reaction path forming the product (NH2C6H4CH2 + H2O) dominates in the higher-temperature region (T ≥ 1800K). Within the specified temperature range, the product branching ratio for the former declines from 48 to 30%, while the latter shows an increase, reaching 29%. The overall second-order rate constants of the titled reaction obtained at the pressure 760Torr (N2) can be illustrated by the modified Arrhenius expression of ktotal = 1.46 × 10-13 T0.58 exp[(-0.759kcal.mol-1)/RT] cm3 molecule-1s-1 and ktotal = 1.86 × 10-22 T3.24 exp[(-5.086kcal.mol-1)/RT] cm3 molecule-1s-1, covering the temperature range of T = 300-600K and T > 600K, respectively. The total rate constant at the ambient conditions in this work, 1.43 × 10-11 cm3 molecule-1s-1, has been found to be roughly one order of magnitude lower than the available experimental data, ~ 1.2 × 10-10 cm3 molecule-1s-1, measured by Atkinson et al., Rinke et al., and Witte et al., or the theoretical value, 4.4 × 10-10 cm3 molecule-1s-1, and calculated by Abdel-Rahman and co-workers for the aniline + •OH reaction. The structures of reactants, transition states, intermediate states, and products of the meta-aminotoluene + •OHreaction are calculated with the aug-cc-pVTZ basis set and the methods DFT/B3LYP and CCSD(T). The rate constants and branching ratios in the 300-2000K temperature range are calculated with the statistical theoretical TST and RRKM master equation computations including tunneling corrections, with potential energy surface constructed by the CCSD(T)//B3LYP/aug-cc-pVTZ approach.

The Synthesis and Ring‐closing Reactions of Aminocyclohexane Derivatives Bearing Unsaturated Side‐chains at C2.

Two epimeric pairs of N‐Ts‐protected cyclohexylamines that incorporate an unsaturated side‐chain at the C2 position have been prepared. Contrary to expectations, none of these underwent clean, photochemically‐induced intramolecular hydroamination reactions to give the corresponding perhydro‐indole or ‐quinolines. However, they did participate in efficient olefin cross metathesis (OCM) reactions with methyl crotonate. Three of the four acrylates so‐formed engaged in base‐promoted and completely diastereoselective, intramolecular aza‐Michael addition (cyclisation) reactions to give the isomeric and C2‐substituted perhydro‐indoles or ‐quinolines with the structures of these being confirmed by single‐crystal X‐ray analyses. DFT calculations generated results consistent with the observed diastereoselectivities and the proposed transition states. Manipulation of the ester groups associated with the cyclization products allowed for their conversion, inter alia, into the corresponding n‐propyl residues and thus providing novel analogues of neurotoxic alkaloids such as pumiliotoxin C.

Restriction on molecular fluxionality by substitution: A case study for the 1,10-dicyanobullvalene.

We show herein that 1,10-dicyano substitution restricts the paragon fluxionality of bullvalene to just 14 isomers which isomerize along a single cycle. The restricted fluxionality of 1,10-dicyanobullvalene (DCB) is investigated by means of: (i) Bonding analyses of the isomer structures using the adaptive natural density partitioning (AdNDP). (ii) Quantum dynamical simulations of the isomerizations along the cyclic intrinsic reaction coordinate of the potential energy surface (PES). The PES possesses 14 equivalent potential wells supporting 14 isomers which are separated by 14 equivalent potential barriers supporting 14 transition states. Accordingly, at low temperatures, DCB appears as a hindered molecular rotor, without any delocalization of the wavefunction in the 14 potential wells, without any nuclear spin isomers, and with completely negligible tunneling. These results are compared and found to differ from those for molecular boron rotors. (iii) Born-Oppenheimer molecular dynamics (BOMD) simulations of thermally activated isomerizations. (iv) Calculations of the rate constants in the frame of transition state theory (TST) with reasonable agreement achieved with the BOMD results. (v) Simulations of the equilibration dynamics using rate equations for the isomerizations with TST rate coefficients. Accordingly, in the long-time limit, isomerizations of the 14 isomers, each with Cs symmetry, approach the "14 Cs → C7v" thermally averaged structure. This is a superposition of the 14 equally populated isomer structures with an overall C7v symmetry. By extrapolation, the results for DCB yield working hypotheses for so far un-explored properties e.g. for the equilibration dynamics of C10H10.

Computational Analysis of Low Overpotential Ammonia Oxidation by Metal-Metal Bonded Ruthenium Catalysts, and Predictions for Related Osmium Catalysts.

The catalyzed electrochemical oxidation of ammonia to nitrogen (AOR) is an important fuel-cell half-reaction that underpins a future nitrogen-based energy economy. Our laboratory has reported spontaneous chemical and electrochemical oxidation of ammonia to dinitrogen via reaction of ammonia with the metal-metal bonded diruthenium complex Ru2(chp)4OTf (chp- = 2-chloro-6-hydroxypyridinate, TfO- = trifluoromethanesulfonate). This complex facilitates electrocatalytic ammonia oxidation at mild applied potentials of -255 mV vs ferrocene, which is the [Ru2(chp)4(NH3)]0/+ redox potential. We now report a comprehensive computational investigation of possible mechanisms for this reaction and electronic structure analysis of key intermediates therein. We extend this analysis to proposed second-generation electrocatalysts bearing structurally similar fhp and hmp (2-fluoro-6-hydroxypyridinate and 2-hydroxy-6-methylpyridinate, respectively) equatorial ligands, and we further expand this study from Ru2 to analogous Os2 cores. Predicted M24+/5+ redox potentials, which we expect to correlate with experimental AOR overpotential, depend strongly on the identity of the metal center, and to a lesser degree on the nature of the equatorial supporting ligand. Os2 complexes are easier to oxidize than analogous Ru2 complexes by ∼640 mV, on average. In contrast to mono-Ru catalysts, which oxidize ammonia via a rate-limiting activation of the strong N-H bond, we find lowest-energy reaction pathways for Ru2 and Os2 complexes that involve direct N-N bond formation onto electrophilic intermediates having terminal amido, imido, or nitrido groups. While transition state energies for Os2 complexes are high, those for Ru2 complexes are moderate and notably lower than those for mono-Ru complexes. We attribute these lower barriers to enhanced electrophilicity of the Ru2 intermediates, which is a consequence of their metal-metal bonded structure. Os2 intermediates are found to be, surprisingly, less electrophilic, and we suggest that Os2 complexes may require access to oxidation states higher than Os25+ in order to perform AOR at reasonable reaction rates.

Disentangling the Conformational Space and Structural Preferences of Tetrahydrofurfuryl Alcohol Using Rotational Spectroscopy and Computational Chemistry.

The influence of the hydroxymethyl (CH2OH) group on the tetrahydrofuran (THF) ring structure was investigated by disentangling the gas phase conformational landscape of the sugar analogue tetrahydrofurfuryl alcohol (THFA). By combining rotational spectroscopy (6-20 GHz) and quantum chemical calculations, transitions corresponding to two stable conformers of THFA and their 13C isotopologues were observed and assigned in the rotational spectrum. The positions of the C atoms were precisely determined to unambiguously distinguish between nearly isoenergetic pairs of conformers that differ in their ring configurations: envelope (E) versus twist (T). The rotational spectrum confirms that the E ring geometry is favoured when the CH2OH fragment lies gauche (-) to the THF backbone (OCCO ~-60°) whereas the T form is more stable for the gauche (+) alignment of the substituent (OCCO ~+60°). The observed spectral intensities suggest that conformational relaxation of the THF geometry (E↔T) to the more stable form readily occurs within the pairs of g- and g+ conformers which is consistent with the low barriers (1.5-1.7 kJ mol-1) for conversion determined via transition state calculations. Insights into the intramolecular hydrogen bonding and other weak interactions stabilizing the lowest energy structures of THFA were derived and rationalized using non-covalent interaction analyses.

Mechanism of Z-Selective Allylic Functionalization via Thianthrenium Salts.

A detailed mechanistic study of the Z-selective allylic functionalization via thianthrenium salts is presented. Kinetic analyses, deuterium labeling experiments, and computational methods are used to rationalize the observed reactivity and selectivity. We find that the reaction proceeds via a rate-determining and stereodetermining allylic deprotonation of an alkenylthianthrenium species. The Z-configuration of the resultant allylic ylide is translated into the Z-allylic amine product through a sequence of subsequent fast and irreversible steps: protonation to form a Z-allylic thianthrenium electrophile and then regioselective substitution by the nucleophile. In the stereodetermining deprotonation step, computational studies identified a series of stabilizing nonbonding interactions in the Z-alkene-forming transition state that contribute to the stereoselectivity.

Topological phase transition and tunable surface states in YBi.

A unique co-existence of extremely large magnetoresistance (XMR) and topological characteristics in non-magnetic rare-earth monopnictides has stimulated intensive research on these materials. Yttrium monobismuthide (YBi) has been reported to exhibit XMR up to 105% but its Topological properties still need clarification. Here we use the hybrid density functional theory to probe the structural, electronic, and topological properties of YBi in detail. We observe that YBi is topologically trivial semimetal at ambient pressure which is in accordance with reported experimental results. The topological phase transitions i.e., trivial to non-trivial are obtained with volumetric pressure of 6.5 GPa and 3% of epitaxial strain. This topological phase transitions are well within the structural phase transition of YBi (24.5 GPa). The topological non-trivial state is characterized by band inversions among Y-d band and Bi-p band at Γ- and X-point which is further verified with the help of surface band structure along (001) plane. The Z2 topological invariants are calculated with the help of product of parities and evolution of Wannier charge centers. The occurrence of non-trivial phase in YBi with a relatively small epitaxial strain, which a thin film geometry can naturally has, make it an ideal candidate to probe inter-relationship between XMR and non-trivial topology.

Spin-Restricted Descriptions of Singlet Oxygen Reactions from XMS-CASPT2 Benchmarks.

Reactions of singlet oxygen are numerous, some of which are desired but many are unwanted. Therefore, the ability to correctly predict and interpret this reactivity for complex molecular systems is essential to our understanding of singlet oxygen reactions. DFT is widely used for predicting many reactions but is not suited to degenerate electronic structures; application to isolated singlet oxygen often uses the spin-unrestricted formalism, which results in severe spin contamination. In this work, we demonstrate that spin-restricted DFT can correctly describe the reaction pathway for four prototypical singlet oxygen reactions. By careful benchmarking with XMS-CASPT2, we show that, from the first transition state onward, the degeneracy of the 1Δg state is broken due to differing interactions of the (degenerate) π* orbitals with the organic substrate; this result is well replicated with DFT. These findings demonstrate the utility of using spin-restricted DFT to explore reactions, opening the way to confidently use this computationally efficient method for molecular systems of medium to large organic molecules.

Compensación cinética y termodinámica del pardeamiento no enzimático de zumos clarificados de limón

This paper presents a study on kinetic and thermodynamic compensation to evaluate the kinetics of non-enzymatic browning of clarified lemon juices. In a previous work, the kinetic constants of browning were presented using the evolution of the absorbance at 420 nm (A420) and luminosity (L*) for different soluble solids contents (64.6; 50; 35; 20 and 10 ºBrix) and different working temperatures (70, 80, 90 and 95 ºC). The parameters of the Arrhenius equation were obtained by fitting the kinetic constants and temperatures. The variation of lnK0 with Ea follows a linear trend, so there is kinetic compensation, with isokinetic temperature values being 126.6 ºC and 149.7 ºC for A420 and L*, respectively. The transition state equilibrium constants were determined using the Eyring equation for each soluble solids content and each temperature. The equilibrium constants were adjusted to the Van't Hoff equation and the set of pairs of estimated values for the activation enthalpy and the activation entropy also followed a straight line, which causes thermodynamic compensation, with isoequilibrium temperatures of 112.8 ºC and 136.3 ºC for A420 and L*, respectively. It was concluded that the browning mechanism is the same for the ranges of soluble solids content and temperature studied. Since all isokinetic and isoequilibrium temperatures were higher than the working temperature values, it was also concluded that the control was enthalpic for all cases. To avoid the deterioration of these juices, it is advisable to intervene in the working temperature, trying to ensure that the heat treatment is carried out at the lowest possible temperature.

Combined Computational and Experimental Study Reveals Complex Mechanistic Landscape of Brønsted Acid-Catalyzed Silane-Dependent P═O Reduction.

The reaction mechanism of Brønsted acid-catalyzed silane-dependent P═O reduction has been elucidated through combined computational and experimental methods. Due to its remarkable chemo- and stereoselective nature, the Brønsted acid/silane reduction system has been widely employed in organophosphine-catalyzed transformations involving P(V)/P(III) redox cycle. However, the full mechanistic profile of this type of P═O reduction has yet to be clearly established to date. Supported by both DFT and experimental studies, our research reveals that the reaction likely proceeds through mechanisms other than the widely accepted "dual activation mode by silyl ester" or "acid-mediated direct P═O activation" mechanism. We propose that although the reduction mechanisms may vary with the substitution patterns of silane species, Brønsted acid generally activates the silane rather than the P═O group in transition structures. The proposed activation mode differs significantly from that associated with traditional Brønsted acid-catalyzed C═O reduction. The uniqueness of P═O reduction originates from the dominant Si/O═P orbital interactions in transition structures rather than the P/H-Si interactions. The comprehensive mechanistic landscape provided by us will serve as a guidance for the rational design and development of more efficient P═O reduction systems as well as novel organophosphine-catalyzed reactions involving P(V)/P(III) redox cycle.

Influence of Ti-incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2.

Vapor-phase propylene (C3H6) epoxidation kinetics with hydrogen peroxide (H2O2) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules ("solvent") near active sites even without a bulk liquid phase. Steady-state turnover rates of C3H6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH)x) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH3CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H2O2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C3H6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH3CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C3H6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH3CN within pores and the extended pore structure.

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2

Vapor‐phase propylene (C3H6) epoxidation kinetics with hydrogen peroxide (H2O2) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C3H6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH)x) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH3CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H2O2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C3H6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH3CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C3H6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH3CN within pores and the extended pore structure.