Transfer Reactions Research Articles

Dynamics of carbene formation in the reaction of methane with the tantalum cation in the gas phase.

The controlled activation of methane has drawn significant attention throughout various disciplines over the last few decades. In gas-phase experiments, the use of model systems with reduced complexity compared to condensed-phase catalytic systems allows us to investigate the intrinsic reactivity of elementary reactions down to the atomic level. Methane is rather inert in chemical reactions, as the weakening or cleavage of a C-H bond is required to make use of methane as C1-building block. The simplest model system for transition-metal-based catalysts is a mono-atomic metal ion. Only a few atomic transition-metal cations activate methane at room temperature. One of the most efficient elements is tantalum, which forms a carbene and releases molecular hydrogen in the reaction with methane: Ta+ + CH4 → TaCH2+ + H2. The reaction takes place at room temperature due to efficient intersystem crossing from the quintet to the triplet surface, i.e., from the electronic ground state of the tantalum cation to the triplet ground state of the tantalum carbene. This multi-state reactivity is often seen for reactions involving transition-metal centres, but leads to their theoretical treatment being a challenge even today. Chemical reactions, or to be precise reactive collisions, are dynamic processes making their description even more of a challenge to experiment and theory alike. Experimental energy- and angle-differential cross sections allow us to probe the rearrangement of atoms during a reactive collision. By interpreting the scattering signatures, we gain insight into the atomistic mechanisms and can move beyond stationary descriptions. Here, we present a study combining collision energy dependent experimentally measured differential cross sections with ab initio calculations of the minimum energy pathway. Product ion velocity distributions were recorded using our crossed-beam velocity map imaging experiment dedicated to studying transition-metal ion molecule reactions. TaCH2+ velocity distributions reveal a significant degree of indirect dynamics. However, the scattering distributions also show signatures of rebound dynamics. We compare the present results to the oxygen transfer reaction between Ta+ and carbon dioxide, which we recently studied.

Redox Approaches to Carbene Generation in Catalytic Cyclopropanation Reactions.

Transition metal-catalyzed carbene transfer reactions have a century-old history in organic chemistry and are a primary method for the synthesis of cyclopropanes. Much of the work in this field has focused on the use of diazo compounds and related precursors, which can transfer a carbene fragment to a catalyst with concomitant loss of a stable byproduct. Despite the utility of this approach, there are persistent limitations in the scope of viable carbenes, most notably those lacking stabilizing substituents. By coupling carbene transfer chemistry with two-electron redox cycles, it is possible to expand the available starting materials that can be used as carbene precursors. In this Minireview, we discuss emerging catalytic reductive cyclopropanation reactions using either gem-dihaloalkanes or carbonyl compounds. This strategy is inspired by classic stoichiometric transformations, such as the Simmons-Smith cyclopropanation and the Clemmensen reduction, but instead entails the formation of a catalytically generated transition metal carbene or carbenoid. We also present recent efforts to generate carbenes directly from methylene (CR2H2) groups via a formal dehydrogenation. These reactions are currently restricted to substrates containing electron-withdrawing substituents, which serve to facilitate deprotonation and subsequent oxidation of the anion.

Study the structure of the low-lying states of 206Po

The nucleus 206Po was studied in the two proton transfer reaction 204Pb(16O,14C)206Po and the lifetime of the first excited 2+ state was determined by utilizing the Recoil Distance Doppler Shift method. The experimental results are compared with shell-model calculations based on different effective interactions. The calculations qualitatively reproduced the experimentally observed B(E2;21+→01+) value, suggesting that the 21+ state of 206Po exhibits a collective nature. However, the employed effective interactions revealed some limitations, particularly in their description of the 41,2+ states. These results emphasize the importance of understanding the properties of low-lying states, especially their evolution from single-particle dynamics to collective modes, in evaluating various effective nuclear interactions.

Ultrafast hydrogen production in boron/oxygen-codoped graphitic carbon nitride revealed by nonadiabatic dynamics simulations.

Graphitic carbon nitride (g-C3N4 or GCN) shows promise in photocatalytic water splitting, despite facing the challenge of rapid electron-hole recombination. In this study, we investigated the influence of boron/oxygen codoping on the photocatalytic performance of GCN systems for hydrogen generation. First-principles calculations and nonadiabatic molecular dynamics (NAMD) simulations were employed to reveal that the recombination time of photogenerated carriers could be increased by 16% to 64% in the codoped systems compared to the pristine GCN. The time-dependent density functional theory (TDDFT) scheme was utilized to select energy windows and initiate dynamics in cluster models of B/O co-doped heptazine with water molecules. Notably, we observed efficient direct photodissociation of hydrogen atoms from water molecules within 60 fs and proton hops within the hydrogen-bonded network within 80 fs in the co-doped system, diverging from the previously proposed mechanism for pristine heptazine in NAMD simulations. This discovery underscores the significant role of faster proton-coupled electron transfer (PCET) reactions and rapid radiationless relaxation in achieving high photocatalytic efficiency in water splitting. Our work enhances the understanding of the internal mechanism of highly efficient photocatalysts for water splitting and provides a new design strategy for doped GCN.

Supercritical CH3OH-Triggered Isotype Heterojunction and Groups in g-C3N4 for Enhanced Photocatalytic H2 Evolution.

The structure tuning of bulk graphitic carbon nitride (g-C3N4) is a critical way to promote the charge carriers dynamics for enhancing photocatalytic H2-evolution activity. Exploring feasible post-treatment strategies can lead to effective structure tuning, but it still remains a great challenge. Herein, a supercritical CH3OH (ScMeOH) post-treatment strategy (250-300 °C, 8.1-11.8 MPa) is developed for the structure tuning of bulk g-C3N4. This strategy presented advantages of time-saving (less than 10 min), high yield (over 80%), and scalability due to the enhanced mass transfer and high reactivity of ScMeOH. During the ScMeOH post-treatment process, CH3OH molecules diffused into the interlayers of g-C3N4 and subsequently participated in N-methylation and hydroxylation reactions with the intralayers, resulting in a partial phase transformation from g-C3N4 into carbon nitride with a poly(heptazine imide)-like structure (Q-PHI) as well as abundant methyl and hydroxyl groups. The modified g-C3N4 showed enhanced photocatalytic activity with an H2-evolution rate 7.2 times that of pristine g-C3N4, which was attributed to the synergistic effects of the g-C3N4/Q-PHI isotype heterojunction construction, group modulation, and surface area increase. This work presents a post-treatment strategy for structure tuning of bulk g-C3N4 and serves as a case for the application of supercritical fluid technology in photocatalyst synthesis.

A pore scale model study of mass transfer and electrochemical reaction in cathode catalytic layer of high-temperature polymer electrolyte membrane fuel cells

The mass transfer and related electrochemical reactions in the catalytic layer (CL) are crucial for the performance of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs), but there is a lack of understanding of the optimal phosphoric acid content and Pt/C catalyst loading in the CL. In this work, we investigate the influences of Pt/C catalyst numbers (NPt/C) and phosphoric acid film thickness (δPA) on mass transfer and electrochemical reactions of the cathode CL using a pore-scale model (300 × 300 × 300 nm3). The results reveal that larger NPt/C and δPA can impede oxygen diffusion, while lower NPt/C and δPA lead to fewer reaction active sites and lower conductivity, both of which result in lower current density. Therefore, the balance of three-phase transport is extremely important for CL. There is a 3D volcanic relationship between current density, Pt/C catalysts, and phosphoric acid film. At NPt/C = 200 (7407 per μm3) and δPA = 4 nm (the volume fractions of 37.22 % and 17.87 %), the highest current density can be achieved at a potential of 0.5 V (vs. RHE), which increased with the decrease of potential. This work is valuable for understanding the optimizing the microstructure and three-phase transport pathway of the CL to improve the performance of HT-PEMFCs.

Factors that Impact Photochemical Cage Escape Yields.

The utilization of visible light to mediate chemical reactions in fluid solutions has applications that range from solar fuel production to medicine and organic synthesis. These reactions are typically initiated by electron transfer between a photoexcited dye molecule (a photosensitizer) and a redox-active quencher to yield radical pairs that are intimately associated within a solvent cage. Many of these radicals undergo rapid thermodynamically favored "geminate" recombination and do not diffuse out of the solvent cage that surrounds them. Those that do escape the cage are useful reagents that may undergo subsequent reactions important to the above-mentioned applications. The cage escape process and the factors that determine the yields remain poorly understood despite decades of research motivated by their practical and fundamental importance. Herein, state-of-the-art research on light-induced electron transfer and cage escape that has appeared since the seminal 1972 review by J. P. Lorand entitled "The Cage Effect" is reviewed. This review also provides some background for those new to the field and discusses the cage escape process of both homolytic bond photodissociation and bimolecular light induced electron transfer reactions. The review concludes with some key goals and directions for future research that promise to elevate this very vibrant field to even greater heights.

A comprehensive analysis of (d,p), (d,n) and (d,t) transfer reactions by using different density distributions, temperature, nuclear potentials and nucleon-nucleon interactions

A comprehensive analysis of (d,p), (d,n) and (d,t) transfer reactions by using different density distributions, temperature, nuclear potentials and nucleon-nucleon interactions

Shell effects on the drift and fluctuation in multinucleon transfer reactions

Shell effects on the drift and fluctuation in multinucleon transfer reactions

Variations in flavin redox states during extracellular electron transfer and electron conduction in Shewanella oneidensis

Flavin is one of the most prevalent redox molecules utilized by electroactive bacteria. Electroactive bacteria form a three-dimensional architecture with multiple cell assemblages on electrodes in bioelectrochemical systems. This provokes the importance of unveiling the redox chemistry of flavins during electron transfer not only at the bacteria/electrode interface but also inside cell assemblages. However, it has been difficult to directly compare the redox species contributing to each electron transfer reaction. In this study, to simultaneously detect the flavin redox species at the electrode surface and those in cell assemblages, we conducted bipotentiometric cyclic voltammetry on a colony of Shewanella oneidensis MR-1. The bipotentiometric data showed that flavin mononucleotide proceeds the redox cycle at − 0.43 V (vs. standard hydrogen electrode) in the MR-1 colony assignable to the semiquinone/hydroquinone redox cycle, which was supported by experiments with semiquinone scavenger and gene deletion mutants. Notably, the peak at − 0.43 V was not detected at the electrode surface, indicating that the flavin redox cycles and redox potentials involved in the electron transfer inside MR-1 assemblages differ from those at the MR-1/electrode interface. The measurement system presented herein offers a platform to clarify the redox reactions in cell assemblages as well as at the bacteria/electrode interface.

Experimental and numerical investigation on the heat and mass transfer performance of tar rich coal in-situ pyrolysis

On ground experiments are conducted firstly to simulate the multi-physics underground pyrolysis of tar rich coal and find out the kinetic parameters of the reaction. And then multi-physics simulation is performed by coupling heat transfer, fluid flow and chemical reactions. Three pyrolysis models are compared and it’s found that the convective flow of heat carrier in coal seam plays an important role in heat transfer although the flow velocity is low. Then the effects of permeability, inlet mass flow rate on heat and mass transfer are investigated for two geometric models with homogeneous and inhomogeneous permeability. It’s found that increasing the permeability is beneficial for fast production of tar. For the homogeneous permeability model, the pyrolysis reaction can be completed in only 140 days when the permeability is 1000 md while for the non-homogeneous permeability model, increasing the inlet mass flow rate can improve the heat and mass transfer performance only in the early stage when the pyrolysis occurs mainly in the fractured zone with higher permeability. The pyrolysis reaction time when the inlet mass flow rate is 0.174 kg/s is 22 days shorter than that of 0.054 kg/s. But in the later stage the inlet mass flow rate has little effect on the reaction rate and brings about a higher pressure drop. The pyrolysis under different well patterns is also compared and the results indicate that four-well heating and six-well heating modes can improve the uniformity and the reaction conversion rate with the same total inlet mass flow rate during the same time. For the six-well heating mode, the pyrolysis reaction can be completed in about 100 days, which is 60 days shorter than the single-well heating mode.

Electrical Wiring of Malarial Parasite Intermediate Hematin on a Tailored N-Doped Carbon Nanomaterial Surface and Its Bioelectrocatalytic Hydrogen Peroxide Reduction and Sensing.

Hematin, an iron-containing porphyrin compound, plays a crucial role in various biological processes, including oxygen transport, storage, and functionality of the malarial parasite. Specifically, hematin-Fe interacts with the nitrogen atom of antimalarial drugs, forming an intermediate step crucial for their function. The electron transfer functionality of hematin in biological systems has been scarcely investigated. In this study, we developed a biomimicking electrical wiring of hematin-Fe with a model N-drug system, represented as {hematin-Fe---N-drug}. We achieved this by immobilizing hematin on a multiwalled carbon nanotube (MWCNT)/N-graphene quantum dot (N-GQD) modified electrode (MWCNT/N-GQD@Hemat). N-GQD serves as a model molecular drug system containing nitrogen atoms to mimic the {hematin-Fe---N-drug} interaction. The prepared bioelectrode exhibited a distinct redox peak at a measured potential (E1/2) of -0.410 V vs Ag/AgCl, accompanied by a surface excess value of 3.54 × 10-9 mol cm-2. This observation contrasts significantly with the weak or electroinactive electrochemical responses documented in literature-based hematin systems. We performed a comprehensive set of physicochemical and electrochemical characterizations on the MWCNT/N-GQD@Hemat system, employing techniques including FESEM, TEM, Raman spectroscopy, IR spectroscopy, and AFM. To evaluate the biomimetic electrode's electroactivity, we investigated the selective-mediated reduction of H2O2 as a model system. As an important aspect of our research, we demonstrated the use of scanning electrochemical microscopy to visualize the in situ electron transfer reaction of the biomimicking electrode. In an independent study, we showed enzyme-less electrocatalytic reduction and selective electrocatalytic sensing of H2O2 with a detection limit of 319 nM. We achieved this using a batch injection analysis-coupled disposable screen-printed electrode system in physiological solution.

Identification, Characterization, and Electronic Structures of Interconvertible Cobalt-Oxygen TAML Intermediates.

The reaction of Li[(TAML)CoIII]·3H2O (TAML = tetraamido macrocyclic tetraanionic ligand) with iodosylbenzene at 253 K in acetone in the presence of redox-innocent metal ions (Sc(OTf)3 and Y(OTf)3) or triflic acid affords a blue species 1, which is converted reversibly to a green species 2 upon cooling to 193 K. The electronic structures of 1 and 2 have been determined by combining advanced spectroscopic techniques (X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), X-ray absorption spectroscopy/extended X-ray absorption fine structure (XAS/EXAFS), and magnetic circular dichroism (MCD)) with ab initio theoretical studies. Complex 1 is best represented as an S = 1/2 [(Sol)(TAML•+)CoIII---OH(LA)]- species (LA = Lewis/Brønsted acid and Sol = solvent), where an S = 1 Co(III) center is antiferromagnetically coupled to S = 1/2 TAML•+, which represents a one-electron oxidized TAML ligand. In contrast, complex 2, also with an S = 1/2 ground state, is found to be multiconfigurational with contributions of both the resonance forms [(H-TAML)CoIV═O(LA)]- and [(H-TAML•+)CoIII═O(LA)]-; H-TAML and H-TAML•+ represent the protonated forms of TAML and TAML•+ ligands, respectively. Thus, the interconversion of 1 and 2 is associated with a LA-associated tautomerization event, whereby H+ shifts from the terminal -OH group to TAML•+ with the concomitant formation of a terminal cobalt-oxo species possessing both singlet (SCo = 0) Co(III) and doublet (SCo = 1/2) Co(IV) characters. The reactivities of 1 and 2 at different temperatures have been investigated in oxygen atom transfer (OAT) and hydrogen atom transfer (HAT) reactions to compare the activation enthalpies and entropies of 1 and 2.

QM/MM Free Energy Calculations of Long-Range Biological Protonation Dynamics by Adaptive and Focused Sampling.

Water-mediated proton transfer reactions are central for catalytic processes in a wide range of biochemical systems, ranging from biological energy conversion to chemical transformations in the metabolism. Yet, the accurate computational treatment of such complex biochemical reactions is highly challenging and requires the application of multiscale methods, in particular hybrid quantum/classical (QM/MM) approaches combined with free energy simulations. Here, we combine the unique exploration power of new advanced sampling methods with density functional theory (DFT)-based QM/MM free energy methods for multiscale simulations of long-range protonation dynamics in biological systems. In this regard, we show that combining multiple walkers/well-tempered metadynamics with an extended system adaptive biasing force method (MWE) provides a powerful approach for exploration of water-mediated proton transfer reactions in complex biochemical systems. We compare and combine the MWE method also with QM/MM umbrella sampling and explore the sampling of the free energy landscape with both geometric (linear combination of proton transfer distances) and physical (center of excess charge) reaction coordinates and show how these affect the convergence of the potential of mean force (PMF) and the activation free energy. We find that the QM/MM-MWE method can efficiently explore both direct and water-mediated proton transfer pathways together with forward and reverse hole transfer mechanisms in the highly complex proton channel of respiratory Complex I, while the QM/MM-US approach shows a systematic convergence of selected long-range proton transfer pathways. In this regard, we show that the PMF along multiple proton transfer pathways is recovered by combining the strengths of both approaches in a QM/MM-MWE/focused US (FUS) scheme and reveals new mechanistic insight into the proton transfer principles of Complex I. Our findings provide a promising basis for the quantitative multiscale simulations of long-range proton transfer reactions in biological systems.

Multiple effects of relative humidity on heterogeneous ozonolysis of cooking organic aerosol proxies from heated peanut oil emissions

The exposure to cooking organic aerosols (COA) is closely related to people's daily lives. Despite extensive investigations into COA's model compounds like oleic acid, the intricacies of heterogeneous ozonolysis of real COA and the effects of ambient conditions like humidity remain elusive. In this work, the ozonolysis of COA proxies from heated peanut oil emissions was investigated using diffuse reflectance infrared Fourier transform (DRIFTS) spectroscopy, and proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS). We found that humidity hinders the reaction between ozone and CC double bonds due to the competitive adsorption of water and ozone on COA. Although visible light has little influence on the ozonolysis of COA in the absence of humidity, the ozonolytic CO production is significantly promoted by visible light in the presence of humidity. It may be attributed to the formation of water-derived reactive oxygen species (ROS, mainly HO•) from the photosensitization of polycyclic aromatic hydrocarbons (PAHs) in COA. We also found that humidity can enhance the depolymerization of carboxylic acid dimers and hydrolysis of intrinsic acetals in the COA. Moreover, humidity promotes the release of VOCs during both the dark and light ozonolysis of COA. This work reveals the important roles of humidity-responsive and photo-responsive components in COA during its ozonolysis, and the change in VOC release may guide the control of human VOC exposure in indoor air.

A tetrahedral neptunium(V) complex.

Neptunium is an actinide element sourced from anthropogenic production, and, unlike naturally abundant uranium, its coordination chemistry is not well developed in all accessible oxidation states. High-valent neptunium generally requires stabilization from at least one metal-ligand multiple bond, and departing from this structural motif poses a considerable challenge. Here we report a tetrahedral molecular neptunium(V) complex ([Np5+(NPC)4][B(ArF5)4], 1-Np) (NPC = [NPtBu(pyrr)2]-; tBu = C(CH3)3; pyrr = pyrrolidinyl (N(C2H4)2); B(ArF5)4 = tetrakis(2,3,4,5,6-pentafluourophenyl)borate). Single-crystal X-ray diffraction, solution-state spectroscopy and density functional theory studies of 1-Np and the product of its proton-coupled electron transfer (PCET) reaction, 2-Np, demonstrate the unique bonding that stabilizes this reactive ion and establishes the thermochemical and kinetic parameters of PCET in a condensed-phase transuranic complex. The isolation of this four-coordinate, neptunium(V) complex reveals a fundamental reaction pathway in transuranic chemistry.

The application of PTR-MS and non-targeted analysis to characterize VOCs emitted from a plastic recycling facility fire.

On April 11th, 2023, the My Way Trading (MWT) recycling facility in Richmond, Indiana caught fire, mandating the evacuation of local residents and necessitating the U.S. Environmental Protection Agency (EPA) to conduct air monitoring. The EPA detected elevated levels of plastic combustion-related air pollutants, including hydrogen cyanide and benzene. We aimed to identify these and other volatile organic compounds (VOCs) present as well as to identify the potential hazard of each compound for various human health effects. To identify the VOCs, we conducted air monitoring at sites within and bordering the evacuation zone using proton transfer reaction mass spectrometry (PTR-MS) and non-targeted analysis (NTA). To facilitate risk assessment of the emitted VOCs, we used the EPA Hazard Comparison Dashboard. We identified 46 VOCs, within and outside the evacuation zone, with average detection levels above local background levels measured in Middletown, OH. Levels of hydrogen cyanide and 4 other VOCs were at least 1.8-fold higher near the incidence site in comparison to background levels and displayed unique temporal and spatial patterns. The 46 VOCs identified had the highest hazardous potential for eye and skin irritation, with approximately 45% and 39%, respectively, of the VOCs classified as high and very high hazards for these endpoints. Notably, all detected VOC levels were below the hazard thresholds set for single VOC exposures; however, hazard thresholds for exposure to VOC mixtures are currently unclear. This study serves as a proof-of-concept that PTR-MS coupled with NTA can facilitate rapid identification and hazard assessment of VOCs emitted following anthropogenic disasters. Furthermore, it demonstrates that this approach may augment future disaster responses to quantify additional VOCs present in complex combustion mixtures.

High-energy and durable aqueous Zn batteries enabled by multi-electron transfer reactions

High-energy and durable aqueous Zn batteries enabled by multi-electron transfer reactions

Hydrogen Tunneling Exhibiting Unexpectedly Small Primary Kinetic Isotope Effects.

Probing quantum mechanical tunneling (QMT) in chemical reactions is crucial to understanding and developing new transformations. Primary H/D kinetic isotopic effects (KIEs) beyond the semiclassical maximum values of 7‒10 (room temperature) are commonly used to assess substantial QMT contributions in one-step hydrogen transfer reactions, because of the much greater QMT probability of protium vs. deuterium. Nevertheless, we report here the discovery of a reaction model occurring exclusively by H-atom QMT with residual primary H/D KIEs. A 2-hydroxyphenylnitrene, generated in N2 matrix, was found to isomerize to an imino-ketone via sequential (domino) QMT involving anti to syn OH-rotamerization (rate determining step) and [1,4]-H shift reactions. These sequential QMT transformations were also observed in the OD-deuterated sample, and unexpected primary H/D KIEs between 3 and 4 were measured at 3 to 20 K. Analogous residual primary H/D KIEs were found in the anti to syn OH-rotamerization QMT of 2-cyanophenol in a N2 matrix. Evidence strongly indicates that these intriguing isotope-insensitive QMT reactivities arise due to the solvation effects of the N2 matrix medium, putatively through coupling with the moving H/D tunneling particle. Should a similar scenario be extrapolated to conventional solution conditions, then QMT may have been overlooked in many chemical reactions.

Demonstrating the Applicability of Proton Transfer Reaction Mass Spectrometry to Quantify Volatiles Emitted by the Mycoparasitic Fungus Trichoderma atroviride in Real Time: Monitoring of Trichoderma-Based Biopesticides.

The present study aims to explore the potential application of proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS) for real-time monitoring of microbial volatile organic compounds (MVOCs). This investigation can be broadly divided into two parts. First, a selection of 14 MVOCs was made based on previous research that characterized the MVOC emissions of Trichoderma atroviride, which is a filamentous fungus widely used as a biocontrol agent. The analysis of gas-phase standards using PTR-ToF-MS allowed for the categorization of these 14 MVOCs into two groups: the first group primarily undergoes nondissociative proton transfer, resulting in the formation of protonated parent ions, while the second group mainly undergoes dissociative proton transfer, leading to the formation of fragment ions. In the second part of this investigation, the emission of MVOCs from samples of T. atroviride was continuously monitored over a period of five days using PTR-ToF-MS. This also included the first quantitative online analysis of 6-amyl-α-pyrone (6-PP), a key MVOC emitted by T. atroviride. The 6-PP emissions of T. atroviride cultures were characterized by a gradual increase over the first two days of cultivation, reaching a plateau-like maximum with volume mixing ratios exceeding 600 ppbv on days three and four. This was followed by a marked decrease, where the 6-PP volume mixing ratios plummeted to below 50 ppbv on day five. This observed sudden decrease in 6-PP emissions coincided with the start of sporulation of the T. atroviride cultures as well as increasing intensities of product ions associated with 1-octen-3-ol and 3-octanone, whereas both these MVOCs were previously associated with sporulation in T. atroviride. The study also presents the observations and discussion of further MVOC emissions from the T. atroviride samples and concludes with a critical assessment of the possible applications and limitations of PTR-ToF-MS for the online monitoring of MVOCs from biological samples in real time.