Transfer Dispersion Polymerization Research Articles

ABC or ACB triblock copolymers? Changing the RAFT group position in diblock copolymer macro-RAFT agents leads to different PISA behaviors in RAFT dispersion polymerization

ACB and ABC triblock copolymer nanoparticles were prepared by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization using diblock copolymer macromolecular RAFT (macro-RAFT) agents with different RAFT group positions.

Determination of Reaction Kinetics by Time‐Resolved Small‐Angle X‐ray Scattering during Polymerization‐Induced Self‐Assembly: Direct Evidence for Monomer‐Swollen Nanoparticles

AbstractThe kinetics of heterogeneous polymerization is determined directly using small‐angle X‐ray scattering (SAXS). This important advancement is exemplified for the synthesis of sterically‐stabilized diblock copolymer nanoparticles by reversible addition‐fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate (BzMA) in mineral oil at 90 °C. The principle of mass balance is invoked to derive a series of equations for the analysis of the resulting time‐resolved SAXS patterns. Importantly, there is a continuous change in the X‐ray scattering length density for the various components within the reaction mixture. This enables the volume fraction of unreacted BzMA monomer to be calculated at any given time point, which enables the polymerization kinetics to be monitored in situ directly without relying on supplementary characterization techniques. Moreover, SAXS enables the local concentration of both monomer and solvent within the growing swollen nanoparticles to be determined during the polymerization. Data analysis reveals that the instantaneous rate of BzMA polymerization is proportional to the local monomer concentration within the nanoparticles. In principle, this powerful new time‐resolved SAXS approach can be applicable to other heterogeneous polymerization formulations.

Determination of Reaction Kinetics by Time-Resolved Small-Angle X-ray Scattering during Polymerization-Induced Self-Assembly: Direct Evidence for Monomer-Swollen Nanoparticles.

The kinetics of heterogeneous polymerization is determined directly using small-angle X-ray scattering (SAXS). This important advancement is exemplified for the synthesis of sterically-stabilized diblock copolymer nanoparticles by reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate (BzMA) in mineral oil at 90 °C. The principle of mass balance is invoked to derive a series of equations for the analysis of the resulting time-resolved SAXS patterns. Importantly, there is a continuous change in the X-ray scattering length density for the various components within the reaction mixture. This enables the volume fraction of unreacted BzMA monomer to be calculated at any given time point, which enables the polymerization kinetics to be monitored in situ directly without relying on supplementary characterization techniques. Moreover, SAXS enables the local concentration of both monomer and solvent within the growing swollen nanoparticles to be determined during the polymerization. Data analysis reveals that the instantaneous rate of BzMA polymerization is proportional to the local monomer concentration within the nanoparticles. In principle, this powerful new time-resolved SAXS approach can be applicable to other heterogeneous polymerization formulations.

Mixed shell nanoparticles via polymerization-induced self-assembly of Y-shaped ABC miktoarm star copolymers

Mixed shell polymer nanoparticles (MSPNs) have emerged as a very significant research topic in the field of macromolecular science. In this study, a robust method for efficient preparation of MSPNs with various morphologies via polymerization-induced self-assembly (PISA) of Y-shaped ABC miktoarm star copolymers was demonstrated. Poly(ε-caprolactone)-b-poly(methyl methacrylate) diblock copolymers carrying a trithiocarbonate (TTC) group at the diblock joint (PCL-TTC-PMMA) were synthesized via the sequential ring-opening polymerization of ε-caprolactone (ε-CL) and atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) using a multifunctional initiator. Subsequently, PCL-TTC-PMMA copolymers acted as both macromolecular chain transfer agents (CTAs) and stabilizers to mediate reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 4-vinylpyridene (4-VP) in toluene, producing MSPNs with different morphologies including spheres, short rods, worms and vesicles. The factors influencing the morphologies of MSPNs during PISA, including solid content and the chain length of stabilizers, were investigated. RAFT-based dispersion polymerizations of 4-VP monomers mediated by PCL-TTC-PMMA copolymers were also compared with those mediated by linear PMMA-TTC with approximately the same length of PCL-TTC-PMMA under the identical conditions. Their different PISA behaviors were unraveled.

Efficient Synthesis and PISA Behavior of Molecular Bottlebrush Block Copolymers via a Grafting-From Strategy through RAFT Dispersion Polymerization

Precise synthesis of molecular bottlebrushes (MBBs) with high yield via the grafting-from strategy using a reversible deactivation radical polymerization (RDRP) technique has remained elusive. Herein, the molecular bottlebrush block copolymers (MBB BCPs) with high yield and varying chemical compositions were synthesized via a polymerization-induced self-assembly (PISA)-assisted grafting-from strategy by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization. First, the poly(norbornene-g-poly(ethylene oxide))-b-poly(norbornene-g-chain transfer agent) [P(NB-g-PEG45)-b-P(NB-CTA)] BCPs with varied chemical compositions were synthesized by sequential ring-opening metathesis polymerization (ROMP) of norbornene PEG macromonomers (NB-PEG45) and norbornene chain transfer agent (NB-CTA) monomers. Subsequently, these P(NB-g-PEG45)m-b-P(NB-CTA)n BCPs were used as multifunctional macro-CTAs for the synthesis of MBB BCPs with a high yield (up to 80% styrene monomer conversion) and a low dispersity (Đ < 1.15) via a grafting-from strategy through RAFT dispersion polymerization. The PISA behaviors of these MBB BCPs were also investigated, and the results indicated that the MBB BCPs assemblies were transformed from spherical micelles into two-dimensional disk-like micelles because the rigidity of the PS MBB segment increased with the growth of PS side chains.

Scalable Preparation of Cylindrical Block Copolymer Micelles with a Liquid-Crystalline Perfluorinated Core by Photoinitiated Reversible Addition-Fragmentation Chain Transfer Dispersion Polymerization

One-dimensional block copolymer micelles have exhibited considerable promise in various fields. However, the large-scale preparation of one-dimensional block copolymer micelles is always challenging. Here, we report the preparation of cylindrical block copolymer micelles up to 30% w/w solids by photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 2-(perfluorooctyl)ethyl methacrylate (FMA) in ethanol. Because of the liquid-crystalline ordering effect of the PFMA core-forming block at low temperatures, cylindrical micelles could be obtained over a wide range of degree of polymerization of PFMA. The length of cylindrical micelles could be roughly controlled by changing the molar mass of the macromolecular chain transfer agent (macro-CTA). Finally, the concept of seeded growth was successfully incorporated into photoinitiated RAFT dispersion polymerization, allowing the epitaxial growth of cylindrical micelles from seeds. We expect that this method will offer considerable opportunities for the large-scale preparation of well-defined cylindrical micelles that may find applications in some specific areas.

In-depth study of anticancer drug diffusion through a cross-linked ­pH-responsive polymeric vesicle membrane

Post-encapsulation and release of the anticancer drug doxorubicin hydrochloride (DOX·HCl) through cell-like transmission functions of polymeric vesicles were studied using cross-linked pH-responsive polymeric vesicles. The vesicles were fabricated for the first time via the redox-initiated reversible addition-fragmentation chain transfer dispersion polymerization in ethanol-water mixture, using 2-(diisopropylamino)ethyl methacrylate and glycidyl methacrylate, and the vesicle membrane was modified post-cross-linking by using ethylenediamine. A phase diagram was constructed for reproducible fabrication of the polymeric vesicles, and well-shaped vesicles were formed when the target degree of polymerization of the hydrophobic polymer chains was equal to or higher than 50 with solid content in the range of 10–30 wt%. The cross-linked vesicle membrane served as a gate enabling “open” and “closed” states in response to pH stimulation. Up to 50% drug loading efficiency and 39% drug loading content could be achieved, and in vitro release of the DOX-loaded vesicles in aqueous buffer solutions showed a much faster DOX release rate at pH 5.0 than at pH 6.5. The polymeric vesicles were of very low cytotoxicity to A549 cells up to the concentration of 2 mg/mL, and the IC50 of DOX-loaded vesicles were higher than that of the free DOX. The intracellular DOX release study indicated higher cellular uptake capability for DOX-loaded vesicles than that of free DOX.

Preparation of polymeric vesicles with tertiary amine and epoxy functional groups via polymerization-induced self-assembly

Polymeric vesicles with tertiary amine and epoxy functional groups were fabricated via the reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 2-(diisopropylamino) ethyl methacrylate (DIPEMA) and glycidyl methacrylate (GlyMA) in an ethanol-water mixture by using poly (ethylene oxide)-4-(4-Cyanopentanoic acid) dithiobenzoate (mPEG45-CPADB) as the macro-chain-transfer agent (macro-CTA). Biocompatible polymer mPEG45 with molecular weight of 2000 and 4-(4-Cyanopentanoic acid) dithiobenzoate (CPADB) were used for the macro-CTA synthesizing via the esterification reaction. Investigation of the degree of polymerization (DP) of the hydrophobic block P(DIPEMA-co-GlyMA) and the solid content indicated that both have significant effect on the particle morphology and particle diameter. 1H NMR and FTIR analysis indicated the existing of tertiary amine and epoxy functional groups on the produced vesicles.

Preparation of polymeric vesicles via redox-initiated RAFT dispersion polymerization

2-(diisopropylamino) ethyl methacrylate (DIPEMA) and glycidyl methacrylate (GlyMA) were used for the investigation of the redox-initiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization, by using poly (ethylene oxide)-4-(4-Cyanopentanoic acid) dithiobenzoate (mPEG-CPADB) as the macro-chain-transfer agent (macro-CTA). The particle growth process study indicated that the particles changed from spheres to worms, and then to vesicles during the polymerization process. The degree of polymerization (DP) of the hydrophobic block P(DIPEMA-co-GlyMA) affected the particle morphology, particle diameter and molecular weight significantly. Pure polymeric vesicles could be obtained when DP was equal to or higher than 60, and with increasing of the DP of the hydrophobic block, the diameter and the molecular weight of the particles both increased.

Exploiting Wavelength Orthogonality in Photoinitiated RAFT Dispersion Polymerization and Photografting for Monodisperse Surface-Functional Polymeric Microspheres.

We report a strategy toward surface-functional polymeric microspheres using a wavelength orthogonality technique that employs photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization and the subsequent photografting under different wavelengths of light. Initial screening of reaction conditions indicated photoreactive polymeric microsphere with uniform sizes could be prepared by using photoinitiator-functionalized macro-RAFT agents under purple light irradiation. Photoreactive polymeric microspheres allowed photografting polymerizations under UV light irradiation, and we further demonstrated the broad scope of this method by photografting acrylamide, acrylic, and methacrylic monomers. Finally, carboxyl-functionalized polymeric microspheres with an exceptional high number of carboxyl groups were successfully prepared by this technique, which permitted extensive surface bioconjugation of model proteins (e.g., streptavidin). This method should expand the capabilities of RAFT dispersion polymerization to afford diverse surface-functional polymeric microspheres for some specific applications.

Exploring the topological effect of linear and cyclic macroCTAs during polymerization-induced self-assembly (PISA)

Polymerization-induced self-assembly (PISA) is a robust strategy for the syntheses of block copolymer nano-objects with various morphologies. Although PISA has been extensively studied, the use of cyclic macromolecular chain transfer agents (macroCTAs) as the hydrophilic block has not been reported. We explored the effects of macroCTA topology on the polymerization kinetics and morphologies of block copolymer assemblies during reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization. To this end, linear and cyclic poly (ethylene oxide) (PEO) with 4-(4-cyanopentanoic acid) dithiobenzoate (CPADB) groups were synthesized and used as CTAs to mediate the RAFT polymerization of benzyl methacrylate (BzMA) and 2,3,4,5,6-pentafluorostyrene (PFSt) under PISA formulation. Interestingly, the nucleation period of the linear PEO is slightly shorter than that of its cyclic analog, and the cyclic hydrophilic segment leads to a delayed morphological transition during PISA.

A3B-type miktoarm star polymer nanoassemblies prepared by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization

The investigation on a series of A3B-type miktoarm star polymer assemblies by RAFT PISA has revealed the role of A3B architecture in delaying morphological transitions, and the formation of larger vesicles as well as other interesting morphologies.

High-Yield Synthesis of Molecular Bottlebrushes via PISA-Assisted Grafting-from Strategy.

To prepare molecular bottlebrushes with high yield via a grafting-from strategy using a reversible deactivation radical polymerization (RDRP) technique has always been a big challenge due to the intra- and intermolecular radical-radical coupling. Herein, a polymerization-induced self-assembly (PISA)-assisted grafting-from strategy based on reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization was developed to synthesize the Janus molecular bottlebrushes with a well-defined structure and high yield using polynorbornene-g-(poly(ethylene glycols)-branch-RAFT agent) (PNB-g-(PEG-branch-CTA)) as a solvophilic multifunctional macro-CTA. The results indicated the biradical coupling terminations of propagating side chains could be significantly suppressed due to the nanoconfinement effect in the PISA of the generated Janus molecular bottlebrushes. Janus molecular bottlebrushes with a narrow molecular weight distribution (Mw/Mn < 1.25) and negligible intermolecular cross-linking at monomer conversion as high as 84% were prepared, demonstrating the efficiency and versatility of the PISA-assisted grafting-from approach.

PH-Switchable Latexes Based on the Nonionic Amphiphilic Diblock Copolymer with a Chargeable End-Group on the Core-Forming Block

Reversible addition-fragmentation transfer (RAFT) dispersion polymerization of styrene was performed in an ethanol-water mixture using a Z-group carboxylated poly(N-acryloylmorpholine) (PNAM) macro-RAFT agent, and dialysis was performed against water to produce the PNAMx-PSy-COOH (PS = polystyrene) diblock copolymer latexes. This new formula is developed for the fabrication of pH-switchable copolymer latexes through an end-group response approach. The PNAM44-PS134-COOH latex is unstable at suitably low pH values (pH ≤ 4), and these aggregated spherical nanoparticles are redispersed successfully by adding base as determined by analysis of their dynamic light scattering (DLS) diameters and transmission electron microscopy (TEM) data. Negative zeta potential (-19.4 mV at 0.02% w/w) of the original latex indicated that carboxylic acid end-groups were anchored on the surface of the PS core via the polymerization-induced self-assembly (PISA) process and exposed to the solvent. Protonation of carboxylate groups reduces the degree of hydration of the PS core with a great impact on the free energy of the core/solvent interface, inducing the aggregation of PNAM44-PS134-COOH latex particles. A comparative experiment where the carboxylic acid end-group is designed on the PNAM stabilizer block proves that no pH-switchable behavior occurs in this case. Moreover, the vesicle-like nanoparticles composed of PNAM44-PS428-COOH copolymers have an apparently anionic character (zeta potential ≈ -33.5 mV at 0.02% w/w) and are still pH-switchable with a lower critical flocculation point (pH 2-3). More importantly, the latex composed of PNAM118-PS151-COOH diblock copolymers is insensitive to the solution pH.

Tough thermosensitive hydrogel with excellent adhesion to low-energy surface developed via nanoparticle-induced dynamic crosslinking

Stimuli-responsive adhesive hydrogels have obtained increasing attention due to their applications in drug delivery and wearable sensors. However, these hydrogels exhibit weak mechanical properties and poor adhesion, especially on low-energy surfaces. Here, a temperature-responsive adhesive hydrogel was developed based on mussel-inspired dopamine chemistry and core–shell nanoparticle-regulated dynamic cross-linking. Poly(N-isopropylacrylamide) (PNIPAM) was used as the hydrogel skeleton, and it endowed the hydrogel with intelligent thermal sensitivity. Core-shell nanoparticles (NPs) with well-controlled sizes were synthesized through reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization. The NPs served as dynamic cross-linking cores and greatly improved the adhesion and mechanical properties of the hydrogel. In particular, the adhesive strength of PNIPAM-PDA-NP hydrogel on PTFE reached 10.3 kPa, and the maximum compressive strength was measured to be 3.41 MPa when being compressed by 90% of its volume. This study provides a novel strategy to develop high-performance stimuli-responsive adhesive hydrogels.

Preparation of Block Copolymer Nano-Objects with Embedded β-Ketoester Functional Groups by Photoinitiated RAFT Dispersion Polymerization.

Herein, a photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of 2-(acetoacetoxy)ethyl methacrylate (AEMA) in ethanol/water at room temperature for in situ preparation of β-ketoester-functionalized block copolymer nano-objects is reported. AEMA is also copolymerized with isobornyl methacrylate (IBOMA) to improve the colloidal stability of PIBOMA-based block copolymer nano-objects prepared by photoinitiated RAFT dispersion polymerization at low temperatures. A series of P(IBOMA-stat-AEMA)-based block copolymer nano-objects are prepared by changing reaction parameters. Finally, lanthanide-doped block copolymer nano-objects with luminescent and magnetic properties are also prepared based on the complexation of various lanthanide ions with the β-ketoester group. It is expected that the current study will provide a facile platform for the in situ preparation of β-ketoester-functionalized block copolymer nano-objects with different morphologies for specific applications.

Shear-induced alignment of block copolymer worms in mineral oil.

Poly(stearyl methacrylate)-poly(benzyl methacrylate) [PSMA-PBzMA] diblock copolymer worms were synthesized directly in mineral oil via reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization at 90 °C. Free-standing gels were obtained from this polymerization-induced self-assembly (PISA) formulation when targeting PSMA13-PBzMA65 dispersions at 5% w/w to 20% w/w copolymer concentration. Gel permeation chromatography (GPC) studies indicated that almost identical copolymer chains were obtained in all cases, while transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) studies confirmed that highly anisotropic worms were formed with mean cross-sectional diameters of 11.9-13.1 nm. These worms undergo a thermoreversible worm-to-sphere transition on heating up to 150 °C. Rheological studies were conducted to characterize the shear rate- and concentration-dependent behaviour caused by this change in copolymer morphology, where the initial shear-thinning worm gels form spheres (i.e. a Newtonian fluid) on heating up to 150 °C. Complementary shear-induced polarized light imaging (SIPLI) experiments confirmed the formation of aligned linear worms under applied shear between 80 °C and 110 °C, with high-viscosity dispersions of branched worms being obtained at 20-60 °C and low-viscosity spheres being produced at 150 °C. This study informs the use of such block copolymer worms as rheology modifiers for non-polar oils, which is of potential interest for the automotive industry.

Fabrication and characterization of structurally stable pH-responsive polymeric vesicles by polymerization-induced self-assembly.

Smart polymeric vesicles with both tertiary amine and epoxy functional groups were fabricated for the first time via a reversible addition–fragmentation chain transfer dispersion polymerization approach, using (2-(diisopropylamino)ethyl methacrylate (DIPEMA) and glycidyl methacrylate (GlyMA) in an ethanol–water mixture. Monitoring of the in situ polymerization revealed the low molecular weight distributions and the intermediate structures of spheres and worms, indicating an evolution in particle morphology. A phase diagram was constructed for reproducible fabrication of the vesicles, and copolymer composition was found to be more related to particle morphology. The vesicles exhibited superior structural stability for the cross-linking of the core through epoxydiamine chemistry, and intelligent pH responsibility due to the presence of the tertiary amine groups. The cross-linked vesicles showed good stability and reversibility during the swelling and shrinking cycles by switching the pH values, which endowed them with potential cell-like transmission functions. This research thus provides a method for producing structurally stable pH-responsive polymeric vesicles, and the reported vesicles are based on commercially available starting materials for possible industrial scale-up.

Janus Surface Micelles on Silica Particles: Synthesis and Application in Enzyme Immobilization.

In these years, synthesis and applications of Janus structures have aroused great interest for large-scale applications in chemistry and materials science. Up to now, Janus particles with different morphologies and different functionalities have been synthesized in solutions, but the synthesis of Janus particles on solid surfaces has not been touched. In this research, Janus surface micelles (JSMs) are fabricated on the surfaces of silica particles by polymerization induced surface self-assembly (PISSA) approach, and the JSMs are used for enzyme immobilization. Usually, enzyme immobilization should be able to optimize the performance of the immobilized enzymes, and an ideal immobilization system must offer protection to the immobilized enzyme with retained bioactivity. Herein, it is demonstrated that JSMs on silica particles can be used as an ideal platform for the immobilization of enzymes. To prepare JSMs, poly(2-(dimethylamino) ethyl methacrylate) macro chain transfer agent (PDMAEMA-CTA) brushes on silica particles and poly(di(ethylene glycol) methyl ether methacrylate) macro CTA (PDEGMA-CTA) are employed in reversible addition-fragmentation chain transfer dispersion polymerization of styrene. After polymerization, JSMs with polystyrene cores and PDMAEMA/PDEGMA patches on the surfaces are prepared on silica particles. After quaternization reaction, the quaternized PDMAEMA patches are used for the immobilization of enzymes. Experimental results turn out that enhanced bioactivities of the immobilized enzymes are achieved and the enzyme molecules are well protected by surface Janus structures.

Oil-in-oil pickering emulsions stabilized by diblock copolymer nanoparticles

HypothesisDiblock copolymer nanoparticles have been shown to be Pickering emulsifiers for both oil-in-water and water-in-oil emulsions. Recently, we reported the preparation of sterically-stabilized diblock copolymer spheres in a low-viscosity silicone oil (Macromolecules 53 (2020) 1785–1794). We hypothesized that such spheres could be used as a Pickering emulsifier for a range of oil-in-oil emulsions comprising droplets of a bio-sourced oil dispersed in silicone oil. ExperimentsDiblock copolymer spheres were prepared via reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate in silicone oil and characterized by dynamic light scattering and transmission electron microscopy. These spheres were evaluated as Pickering emulsifiers for a series of oil-in-oil Pickering emulsions. The influence of both sphere size and core-forming block composition was investigated. FindingsOptimization of the nanoparticle size and core-forming block composition enabled stable bio-sourced oil-in-silicone emulsions to be obtained for nine out of the ten bio-sourced oils investigated. These emulsions were characterized in terms of their mean droplet size by optical microscopy.