Trained Back Propagation Neural Network Research Articles

Using voice recognition to measure trust during interactions with automated vehicles

Trust in an automated vehicle system (AVs) can impact the experience and safety of drivers and passengers. This work investigates the effects of speech to measure drivers’ trust in the AVs. Seventy-five participants were randomly assigned to high-trust (the AVs with 100% correctness, 0 crash, and 4 system messages with visual-auditory TORs) and low-trust group (the AVs with a correctness of 60%, a crash rate of 40%, 2 system messages with visual-only TORs). Voice interaction tasks were used to collect speech information during the driving process. The results revealed that our settings successfully induced trust and distrust states. The corresponding extracted speech feature data of the two trust groups were used for back-propagation neural network training and evaluated for its ability to accurately predict the trust classification. The highest classification accuracy of trust was 90.80%. This study proposes a method for accurately measuring trust in automated vehicles using voice recognition.

Multi-source underwater DOA estimation using PSO-BP neural network based on high-order cumulant optimization

Due to the complex and changeable environment under water, the performance of traditional DOA estimation algorithms based on mathematical model, such as MUSIC, ESPRIT, etc., degrades greatly or even some mistakes can be made because of the mismatch between algorithm model and actual environment model. In addition, the neural network has the ability of generalization and mapping, it can consider the noise, transmission channel inconsistency and other factors of the objective environment. Therefore, this paper utilizes Back Propagation (BP) neural network as the basic framework of underwater DOA estimation. Furthermore, in order to improve the performance of DOA estimation of BP neural network, the following three improvements are proposed. (1) Aiming at the problem that the weight and threshold of traditional BP neural network converge slowly and easily fall into the local optimal value in the iterative process, PSO-BP-NN based on optimized particle swarm optimization (PSO) algorithm is proposed. (2) The Higher-order cumulant of the received signal is utilized to establish the training model. (3) A BP neural network training method for arbitrary number of sources is proposed. Finally, the effectiveness of the proposed algorithm is proved by comparing with the state-of-the-art algorithms and MUSIC algorithm.

Investigation of the performance of integrated intelligent models to predict the roughness of Ti6Al4V end-milled surface with uncoated cutting tool

Abstract Titanium alloys are broadly used in the medical and aerospace sectors. However, they are categorized within the hard-to-machine alloys ascribed to their higher chemical reactivity and lower thermal conductivity. This aim of this research was to study the impact of the dry-end-milling process with an uncoated tool on the produced surface roughness of Ti6Al4V alloy. This research aims to study the impact of the dry-end milling process with an uncoated tool on the produced surface roughness of Ti6Al4V alloy. Also, it seeks to develop a new hybrid neural model based on the training back propagation neural network (BPNN) with swarm optimization-gravitation search hybrid algorithms (PSO-GSA). Full-factorial design of the experiment with L27 orthogonal array was applied, and three end-milling parameters (cutting speed, feed rate, and axial depth of cut) with three levels were selected (50, 77.5, and 105 m/min; 0.1, 0.15, and 0.2 mm/tooth; and 1, 1.5, and 2 mm) and investigated to show their influence on the obtained surface roughness. The results revealed that the surface roughness is significantly affected by the feed rate followed by the axial depth. A 0.49 µm was produced as a minimum surface roughness at the optimized parameters of 105 m/min, 0.1 mm/tooth, and 1 mm. On the other hand, a neural network having a single hidden layer with 1–20 hidden neurons, 3 input neurons, and 1 output neuron was trained with both PSO and PSO–GSA algorithms. The hybrid BPNN–PSO–GSA model showed its superiority over the BPNN–PSO model in terms of the minimum mean square error (MSE) that was calculated during the testing stage. The best BPNN–PSO–GSA hybrid model was the 3–18–1 structure, which reached the best testing MSE of 3.8 × 10−11 against 2.42 × 10−5 of the 3–8–1 BPNN–PSO hybrid model.

Forecast of pain degree of lumbar disc herniation based on back propagation neural network.

To further explore the pathogenic mechanism of lumbar disc herniation (LDH) pain, this study screens important imaging features that are significantly correlated with the pain score of LDH. The features with significant correlation imaging were included into a back propagation (BP) neural network model for training, including Pfirrmann classification, Michigan State University (MSU) regional localization (MSU protrusion size classification and MSU protrusion location classification), sagittal diameter index, sagittal diameter/transverse diameter index, transverse diameter index, and AN angle (angle between nerve root and protrusion). The BP neural network training model results showed that the specificity was 95 ± 2%, sensitivity was 91 ± 2%, and accuracy was 91 ± 2% of the model. The results show that the degree of intraspinal occupation of the intervertebral disc herniation and the degree of intervertebral disc degeneration are related to LDH pain. The innovation of this study is that the BP neural network model constructed in this study shows good performance in the accuracy experiment and receiver operating characteristic experiment, which completes the prediction task of lumbar Magnetic Resonance Imaging features for the pain degree of LDH for the first time, and provides a basis for subsequent clinical diagnosis.

A Study on Perception of Visual–Tactile and Color–Texture Features of Footwear Leather for Symmetric Shoes

The study applies Kansei engineering in analyzing the color and texture of leather footwear, utilizing neural network verification to mirror consumers’ visual and tactile imageries onto varieties of leather. This aids in the development of an advanced system for selecting leather footwear based on such impressions. Initially, representative word pairs denoting consumers’ visual and tactile perceptions of leather footwear were delineated. Post-evaluation of these perceptions through a sensibility assessment questionnaire was administered, using 54 samples of leather footwear provided by manufacturers, with each leather type codified in terms of visual and tactile sensibilities. Subsequently, a customized software algorithm was crafted to isolate the primary color and adhesiveness as color features from the leather sample images. Analyzing grayscale values of the images and using pixel neighborhood as a base, the associated calculation methods, such as LBP, SCOV, VAR, SAC, etc., were proposed to extract texture features from the images. The derived color and texture feature values were used as the input layer and the sensory vocabulary quantified values as the output layer. Backpropagation neural network training was conducted on 49 leather samples, with five leather samples used for testing, culminating in the verification of neural network training for three types and 17 combinations. The outcome was an optimal method for leather footwear Kansei engineering and neural network training, establishing a design process for leather footwear characteristics assisted by sensory vocabulary and a backpropagation neural network. Additionally, a computer-aided system for selecting leather footwear, based on these impressions, was designed and validated through footwear design. This study utilized symmetry in footwear design. By using the design of a single shoe to represent the imagery of a pair of symmetrical shoes, we verified whether the leather samples recommended by the leather imagery selection query system met the expected system input settings.

An adaptive indoor localization model based on Cauchy-PSO optimized BPNN

Received Signal Strength Indication (RSSI) fluctuates with the change of indoor noise, resulting in a large positioning error of the trained Back Propagation Neural Network (BPNN). An adaptive indoor positioning model based on Cauchy particle swarm optimization (Cauchy-PSO) BPNN is proposed to solve the problem. In the off-line training phase, the signal with less noise intensity acquired in a good environment is selected as the original training set in the localization phase. The variance of the received set of signals is used as a measure of the noise intensity of the current environment. In the localization phase, the variance of each set of signals received is calculated at equal intervals. If the variance of adjacent intervals differs significantly, the system adjusts the original training set data according to the current noise intensity and re-trains the BP model online. Meanwhile, the particle swarm optimization algorithm using Cauchy variance to optimize the BP network tends to fall into the disadvantage of local optimum. Considering that the collected fingerprint database may generate “high-dimensional disasters”, Principal Component Analysis (PCA) is used to select and downscale the features of the wireless Access Point (AP). The proposed adaptive localization model can be trained online. The improved Cauchy-PSO algorithm and data dimensionality reduction can further improve the localization accuracy and training speed of the BP model. The experimental results show that the adaptive indoor localization model has strong adaptive capability in a noise-varying environment.

Developing a Hybrid Algorithm Based on an Equilibrium Optimizer and an Improved Backpropagation Neural Network for Fault Warning

In today’s rapidly evolving manufacturing landscape with the advent of intelligent technologies, ensuring smooth equipment operation and fostering stable business growth rely heavily on accurate early fault detection and timely maintenance. Machine learning techniques have proven to be effective in detecting faults in modern production processes. Among various machine learning algorithms, the Backpropagation (BP) neural network is a commonly used model for fault detection. However, due to the intricacies of the BP neural network training process and the challenges posed by local minima, it has certain limitations in practical applications, which hinder its ability to meet efficiency and accuracy requirements in real-world scenarios. This paper aims to optimize BP networks and develop more effective fault warning methods. The primary contribution of this research is the proposal of a novel hybrid algorithm that combines a random wandering strategy within the main loop of an equilibrium optimizer (EO), a local search operator inspired by simulated annealing, and an adaptive learning strategy within the BP neural network. Through analysis and comparison of multiple sets of experimental data, the algorithm demonstrates exceptional accuracy and stability in fault warning tasks, effectively predicting the future operation of equipment and systems. This innovative approach not only overcomes the limitations of traditional BP neural networks, but also provides an efficient and reliable solution for fault detection and early warning in practical applications.

Retrieval of atmospheric temperature and humidity profiles over a tropical coastal station from ground-based Microwave Radiometer using deep learning technique

Ground-based multi-frequency microwave radiometer Profiler (Microwave Radiometer Profiler-MRP) provides valuable information on the altitude distribution of atmospheric humidity and temperature in the troposphere (upto ∼10 km) with high temporal resolution (of ∼1 min) under all-weather condition. These information are vital inputs for characterization of the atmospheric boundary layer, convective cloud systems, local weather modification and for studying the atmospheric dynamics. Potential of such radiometers are well established over the mid-latitude region. Thiruvananthapuram, located in the Indian peninsular region, is one of the first stations in the equatorial region where such an instrument made continuously operational for seven years since 2010 at the tropical coastal station. The instrument measures the brightness temperatures (Tb in Kelvin) at Ka- and V-band frequencies with a temporal resolution of ∼1 min. A trained back-propagation neural network technique based on the radiosonde ascends data for more than one decade obtained by India Meteorological station at Thiruvananthapuram, was used to derive the atmospheric humidity and temperature profiles. This paper presents the implementation of another retrieval technique based on deep learning approach - batch normalization and neural network (BNN) to retrieve temperature and water vapour density (WVD) profiles from Tb values during clear sky conditions and validation of the retrieval accuracies. This inversion model, much faster in computation, consists of two hidden layers and the rectified linear unit (ReLU) is used as the activation function as it can overcome the problems of saturation and vanishing gradients. The Tbs observed by radiometer are corrected by reducing the bias between the simulated Tb, using forward radiative transfer model, and the observed Tb. The validation of retrieved profiles with the radiosonde demonstrates a good retrieval capability, showing a root-mean-square error of 1.8K for temperature, <2 g/m3 for WVD and ∼14% for RH.

Dynamic layered routing protocols based on BP-NN for underwater acoustic sensor networks

Underwater acoustic sensor network (UASN) effectively improves the reliability of underwater long distance transmission through multi-hop transmission between multiple nodes. However, the limited energy of underwater acoustic nodes and large end-to-end transmission delay lead to uneven load and short lifetime of UASN. In this paper, we propose a dynamic layered routing protocol based on back propagation neural network (BP-NN), named as BPDLR, to address the above issues. In the proposed scheme, considering such factors as node topology, residual energy and communication environments, the UASN is vertically divided into the top layer, the middle layer and the bottom layer. The routing designs in each layer are different, and each of them is predicted by BP-NN training model for routing. In addition, we compare the proposed BPDLR protocol with the existing schemes such as static layered routing (SLR) protocol and depth-based routing (DBR) protocol in terms of network node survival, average end-to-end delay and packet loss rate. The simulation results show that, the proposed BPDLR protocol effectively alleviates the energy hole problem of UASN and extends the network lifetime.

Characterization of Pepper Ripeness in the Field Using Hyperspectral Imaging (HSI) with Back Propagation (BP) Neural Network and Kernel Based Extreme Learning Machine (KELM) Models

Due to the economic differences of chili peppers at different maturity levels and the absence of differentiation of maturity in existing harvesting processes, it is crucial to accurately identify the maturity during harvesting for improving economic benefits. This paper investigated pepper maturity recognition models using hyperspectral technology to realize intelligent pepper harvesting with high accuracy and monitor maturity. Hyperspectral data (400–1000 nm) for field line peppers were collected, preprocessed using normalization, Savitzky-Golay convolutional smoothing, and standard normal variable transformation and subsequently used to train back propagation neural network (BP) and kernel based extreme learning machine (KELM) models. Principal component analysis (PCA) was used to reduce data dimensionality and identify characteristic spectral wavelengths for pepper maturity at 862.2, 676.9, 578.1, and 980.7 nm; and BP, PCA-BP, KELM, and PCA-KELM models were subsequently established. The precision for the KELM and PCA-KELM models (99.5% and 97.3%, respectively) was superior to the other two models; however, the PCA-KELM model used only four of the feature wavelengths as inputs, hence it required only 1/44 the data compared with the KELM model. Thus, the PCA-KELM model achieved high recognition accuracy and training speed, offering an effective method to discriminate pepper ripeness based on hyperspectral features.

Multi-objective energy saving optimization of residential buildings based on MABC-BP

In order to better satisfy the energy saving requirements of residential buildings in China, this paper proposes a model based on MABC-BP, which performs multi-objective optimization of residential building energy saving to further improve the energy-saving effect. Firstly, in view of the limitations of the traditional ABC algorithm, it was proposed to utilize the particle swarm algorithm to improve the artificial bee colony algorithm, so as to improve the optimal search performance of the traditional bee colony. Then, the parameters of back propagation (BP) neural network were optimized by the improved artificial bee colony algorithm. Finally, using the parameters of a building’s exterior wall, roof and ground as a base, the BP neural network was trained, and the trained BP neural network was utilized to realize the multi-objective prediction of residential building energy saving. Simulation results show that the BP neural network with optimized parameters has good prediction results with an average error value of 0.005. Compared with the original BP neural network, the optimized BP network has better convergence and solution. Compared with the ABC-BP algorithm model, the optimized BP algorithm model achieves better optimization results when optimizing the optimization target selected by the experiment. The above simulation results verify the superiority of the design and the necessity of optimization in this paper, which has certain application value.

Acoustic Source Localization in Metal Plates Using BP Neural Network

This study introduces a methodology for detecting the location of signal sources within a metal plate using machine learning. In particular, the Back Propagation (BP) neural network is used. This uses the time of arrival of the first wave packets in the signal captured by the sensor to locate their source. Specifically, we divide the aluminum plate into several areas, design eight receiving points for receiving the excitation signal, and determine the location of each sound source. In order to train and test the machine learning network, the aluminum plate model was established using the COMSOL numerical simulation platform and the propagation of five peak waves was simulated. Correspondingly, experimental verification was carried out and a scanning laser Doppler vibrometer (SLDV) was used to build an experimental platform to collect the corresponding wave field information to obtain a data set for machine learning. The results show that the trained BP neural network can classify the sound source region in both environments.

Research on Vibration Fatigue Damage Locations of Offshore Oil and Gas Pipelines Based on the GA-Improved BP Neural Network

To study vibration fatigue damage localization of offshore oil and gas pipelines, aiming at the location error caused by uncertainty of the initial parameters in backpropagation (BP) neural network training, an improved BP neural network based on the genetic algorithm (GA) is proposed to locate pipeline damage. This approach was verified by experiments and simulations. First, a BP neural network for structural damage location was constructed, and a method to optimize the BP neural network parameters based on the GA was established. Then, a finite element model was established based on the measured data from modal tests of a physical pipeline model, and a large number of vibration neural network training samples were obtained using the finite element model. Finally, to show that the improved BP neural network based on the GA had a better damage location accuracy, the location results of the original BP and GA BP methods were compared for cases with no noise and with 5% noise. The results show that the average error of the BP neural network based on the GA was less than 3%, which was 11.6% lower than that of the original BP neural network.

Multi-Index Grading Method for Pear Appearance Quality Based on Machine Vision

The appearance quality of fruits affects consumers’ judgment of their value, and grading the quality of fruits is an effective means to improve their added value. The purpose of this study is to transform the grading of pear appearance quality into the classification of the categories under several quality indexes based on industry standards and design effective distinguishing features for training the classifier. The grading of pear appearance quality is transformed into the classification of pear shapes, surface colors and defects. The symmetry feature and quasi-rectangle feature were designed and the back propagation (BP) neural network was trained to distinguish standard shape, apical shape and eccentric shape. The mean and variance features of R and G channels were used to train support vector machine (SVM) to distinguish standard color and deviant color. The surface defect area was used to participate in pear appearance quality classification and the gray level co-occurrence matrix (GLCM) features of defect area were extracted to train BP neural network to distinguish four common defect categories: tabbed defects, bruised defects, abraded defects and rusty defects. The accuracy rates of the above three classifiers reached 83.3%, 91.0% and 76.6% respectively, and the accuracy rate of pear appearance quality grading based on grading rules was 80.5%. In addition, the hardware system prototype for experimental purpose was designed, which have certain reference significance for the further construction of the pear appearance quality grading pipeline.

Design of autonomous vehicle trajectory tracking controller based on Neural Network Predictive Control

When the linear Model Predictive Control (MPC) algorithm is used for trajectory tracking control of autonomous vehicles in high-speed turning conditions, the tracking accuracy is usually decreased due to the low fidelity of the predictive model. To deal with this problem, a trajectory tracking controller based on Neural Network Predictive Control (NNPC) is designed in this paper. The data collected from driving simulation experiments is used for the Back Propagation Neural Network (BPNN) training process to obtain the vehicle state predictive models. To reduce the iteration times of the rolling optimization module of NNPC, Particle Swarm Optimization (PSO) with Fitness Allocating Inertia Weights (PSO-FAIW) algorithm is proposed, which can allocate inertia weights in light of the distance between each particle’s fitness and the best fitness of the swarm. Finally, the performance of the controller designed in this paper is verified based on MATLAB /Simulink. The simulation results demonstrate that the controller proposed in this paper can give consideration to tracking accuracy and real-time performance.

Ergonomic Reliability Assessment of VDT System for Operation Design Based on Improved BPNN and HCR under Special Circumstances

Ergonomic reliability plays a significant role in the safe operation of devices. With the spread of infectious diseases around the world, in work environments with high loads and high infection rates, medical staff work in a state of high self-protection. The use of visual display terminal (VDT) for medical equipment has undergone fundamental changes, and the traditional medical equipment human-machine interface design needs to be improved. After the completion of design and development, a VDT design enters the experimental testing stage, which has significant limitations for simulating the work of medical staff in the high-load and high-infection environments. The testing cost is high, and subjects face harsh conditions; thus, an ergonomic reliability model that can predict the use of VDT in such special high-infection and high-load circumstances must be established. An ergonomic reliability model based on an improved backpropagation neural network (BPNN) and human cognition reliability (HCR) is proposed for predicting and evaluating operation flows according to medical equipment VDTs. Firstly, a small data sample can be used to train BPNN to generate a network that can ensure suitable accuracy. To prevent the model from falling into local optimal solutions, the bat algorithm is introduced to improve the BPNN. Compared to a traditional BPNN, the superiority of the improved BPNN is clearly demonstrated. Secondly, the HCR method is used to analyze and highlight changes in the human factor reliability of VDTs for medical equipment in different time processes and operating processes according to BPNN prediction results, to provide a reference for selecting the optimal method. Finally, the validity and availability of the proposed method are verified through an eye tracker experiment and statistical analysis results.

The application of PSO-BP combined model and GA-BP combined model in Chinese and V4’s economic growth model

Abstract This paper adopts different optimization algorithms such as Genetic Algorithm (GA) and Particle Swarm Optimization Algorithm (PSO-Algorithm) to train Back-Propagation (BP) neural networks, fits the Chinese, the Czech, Slovak, Hungarian, and Polish gross domestic product (GDP) growth model (from 1995 to 2020) and makes short-term simulation predictions. We use the PSO-Algorithm and GA with strong global search ability to optimize the weights and thresholds of the network, combine them with the BP neural network, and apply the resulting Particle Swarm Optimization Back-Propagation (PSO-BP) combined model or Genetic-Algorithm Back-Propagation (GA-BP) combined model to allow the network to achieve fast convergence. Besides, we also compare the above two hybrid models with standard multivariate regression model and BP neural network with different initialization methods like normal uniform and Xavier for fitting and short-term simulation predictions. Finally, we obtain the excellent results that all the above models have achieved a good fitting effect and PSO-BP combined model on the whole has a smaller error than others in predicting GDP values. Through the technology of PSO-BP and GA-BP, we have a clearer understanding of the five countries gross domestic product growth trends, which is conducive to the government to make reasonable decisions on the economic development.

Recognizing and Classifying Bone Ruptures of the Human Skeletal System Utilizing the Machine Learning Methodologies

Abstract: Rapidly expanding technologies appear every day in various disciplines, particularly medical ones. Nonetheless, there are still distinct outdated approaches that are still widely habituated, effective, and efficient. One of these techniques is the use of X-rays to pinpoint injured bones. However, occasionally the digit of fractures is minor and challenging to see. Procedures should be constructed that are efficient and intelligent. In this analysis, an artificial classification system that recognizes and classifies bone fractures is being designed. There are two major stages in the system that has been conceived. The images of the fractures are processed in the initial stage using eclectic image processing practices to determine their position and shapes. The classification phase tracks, in which a back propagation neural network training on the processed pictures before being put to the trial. The system has experimented with photographs of bone fractures, indicating a high rendition and classification speed.

Strike Velocity Prediction of Stick Blunt Instruments Based on Backpropagation Neural Network.

To analyze and predict the striking velocity range of stick blunt instruments in different populations, and to provide basic data for the biomechanical analysis of blunt force injuries in forensic identification. Based on the Photron FASTCAM SA3 high-speed camera, Photron FASTCAM Viewer 4.0 and SPSS 26.0 software, the tester's maximum striking velocity of stick blunt instruments and related factors were calculated and analyzed, and inputed to the backpropagation (BP) neural network for training. The trained and verified BP neural network was used as the prediction model. A total of 180 cases were tested and 470 pieces of data were measured. The maximum striking velocity range was 11.30-35.99 m/s. Among them, there were 122 female data, the maximum striking velocity range was 11.63-29.14 m/s; there were 348 male data, the maximum striking velocity range was 20.11-35.99 m/s. The maximum striking velocity of stick blunt instruments increased with the increase of weight and height, but there was no obvious increase trend in the male group; the maximum striking velocity decreased with age, but there was no obvious downward trend in the female group. The maximum striking velocity of stick blunt instruments has no significant correlation with the material and strike posture. The root mean square error (RMSE), the mean absolute error (MAE) and the coefficient of determination (R2) of the prediction results by using BP neural network were 2.16, 1.63 and 0.92, respectively. The prediction model of BP neural network can meet the demand of predicting the maximum striking velocity of different populations.

Combination of Feature Extractions for Classification of Coral Reef Fish Types Using Backpropagation Neural Network

Feature extraction is important to obtain information in digital images, where feature extraction results are used in the classification process. The success of a study to classify digital images is highly dependent on the selection of the feature extraction method used, from several studies providing a combination of feature extraction solutions to produce a more accurate classification. Classifying the types of marine fish is done by identifying fish based on special characteristics, and it can be through a description of the shape, fish body pattern, color, or other characteristics. This study aimed to classify coral reef fish species based on the characteristics contained in fish images using Backpropagation Neural Network (BPNN) method. Data used in this research was collected directly from Bunaken National Marine Park (BNMP) in Indonesia. The first stage was to extract shape features using the Geometric Invariant Moment (GIM) method, texture features using Gray Level Co-occurrence Matrix (GLCM) method, and color feature extraction using Hue Saturation Value (HSV) method. The third value of feature extraction was used as input for the next stage, namely the classification process using the BPNN method. The test results using 5-fold cross-validation found that the lowest test accuracy was 85%, the highest was 100%, and the average was 96%. This means that the intelligent model derived from the combination of the three feature extraction methods implemented in the BPNN training algorithm is very good for classifying coral reef fish.