Traditional Wastewater Treatment Research Articles

Research on development and quantitative control preparation technology of array-type microfine bubbles generator

In traditional wastewater treatment, ozone injection efficiency is low. There is a need for the quantitative preparation of ozone-based microfine bubbles to balance bubble stability and ozone reactivity. To address this, we developed coaxial and T-type ozone-based microfine bubble generators and conducted experiments to compare their bubble production effects. The more effective generator was then compared with the traditional aeration method. The results indicate the following: 1. The coaxial type is more effective in producing ozone-based microfine bubbles. 2. The bubbles produced by the coaxial type have an average diameter of 0.2–0.4 mm and a residence time of ∼2 min, meeting microfine bubble standards. Experimental data analysis shows compliance with the force process and bubble growth mechanism under coaxial flow, meeting the requirements for quantitative and controllable ozone-based microfine bubble production. 3. Ozone bubbles from the coaxial method surpass those from traditional aeration in volume and concentration. More than 99.73% are microfine bubbles, with an ozone concentration of ∼84.5%. 4. The coaxial method more effectively reduces COD values in water, contributing to efficient wastewater treatment. This research presents new avenues for efficient sewage treatment.

Investigating a batch-flow photocatalytic LED system for diclofenac removal in wastewater treatment plants: Assessing the influence of reaction conditions on photocatalytic efficiency

This work introduces an innovative batch-flow photocatalytic LED system aimed at efficiently removing diclofenac from wastewater. The study highlights the novelty of fabricating TiO2-loaded carbon fiber photocatalysts through a hydrothermal process, exhibiting a blue shift in their absorption spectrum and enhancing their photon absorption capability. A crucial design feature is the spectral matching between the LED light source and the photocatalyst, which is critical for achieving high photodegradation efficiency. A significant innovation of our study is the testing of the system under real conditions at an operational sewage treatment plant. Here, the designed system demonstrated high efficacy in degrading diclofenac across various treatment stages, highlighting its robustness and adaptability to changing environmental conditions. The highest degradation efficiency was achieved with sewage from the secondary settling tank, where nearly 90 % efficiency was observed after 6 h of irradiation. Moreover, the use of renewable energy sources emphasizes the system's sustainability, presenting a greener alternative to traditional wastewater treatment methods. The investigation not only showcases the system's effectiveness in diclofenac degradation but also its adaptability and stability under real-world conditions, marking a significant advancement in sustainable wastewater treatment technologies.

Optimizing removal of antiretroviral drugs from tertiary wastewater using chlorination and AI-based prediction with response surface methodology

Chemical and pharmaceutical chemicals found in water sources create substantial risks to human health and the environment. The presence of pharmaceutical contaminants in water can cause antibiotic resistance development, toxicity to aquatic organisms, and endocrine disruption. Hence, the elimination of chemicals and other contaminants from wastewater prior to its release is a burgeoning concern in the domains of engineering and science. The use of treatment technologies in wastewater treatment plants can remove pharmaceutical contaminants through the oxidation process. However, many traditional wastewater treatment plants lack the advanced monitoring tools required to detect low concentrations of pharmaceuticals. Without the ability to detect these compounds, it's challenging to treat them effectively. The goal of this study was to use Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) algorithms to model and improve how Nevirapine and Efavirenz break down in different chlorination conditions. The RSM analysis revealed statistically significant models (F-values: Nevirapine, pH-t: 108.15, T-t: 76.55, ICC-t: 110.84), indicating a strong correlation between operational parameters (pH, temperature, and initial chlorine concentration) and degradation behavior. The ANN model accurately predicted the degradation of both Nevirapine and Efavirenz under various chlorination conditions, as confirmed by analyzing actual-predicted graphs, residual plots, and Mean Squared Error (MSE) values. The ANN model using ICC-t achieved the highest MOD value of 31.31 % for Nevirapine. The ANN model based on ICC-t yielded a maximum MOD value of 16.06 % for Efavirenz. These findings provide valuable insights into optimizing chlorination processes for better removal of these pharmaceutical contaminants from water.

Degradation of trace pollutants in industrial wastewater using underwater nonthermal plasma: Toward evaluation of bioecotoxicity

Some organic pollutants are resistant to traditional wastewater treatment and are discharged into aquatic ecosystems through wastewater treatment plants (WWTPs). Secondary effluent (SE) collected from WWTPs in the pharmaceutical, electronics, and dyeing industries was treated using an underwater nonthermal plasma system. Screening analysis of trace-level pharmaceutical and pesticide substances in the range of approximately 0 ∼ 3,000 ng/L in SEs has been performed and their removal via plasma treatment was verified. The ecotoxicity evaluation of the SE samples using zebrafish showed a reduction in embryotoxicity (13 %, 37 %, and 27 %) and an increase in hatching rate (23.3 %, 20 %, and 10 %) after the plasma treatment. Therefore, underwater nonthermal plasma treatment is prospected as an appropriate option to ensure the safety of the aquatic ecosystem as it can effectively reduce trace organic pollutants and mitigate their biological effects.

Degradation of pharmaceutical pollutants in different soils by photocatalytic treatment under solar irradiation

Pharmaceutical compounds are chemicals widely applied for the treatment and prevention of human/animal diseases. Wastewater treatment plants (WWTP) are identified as one of their main transfer pathways to aquatic environment since traditional wastewater treatments do not completely remove them. Agricultural irrigation with reclaimed water from WWTP effluents is a growing strategy in areas where water scarcity is a limiting issue. However, the residual presence of these compounds in wastewaters facilitates a new terrestrial route of environmental exposure, increasing the risks of soil pollution and giving rise to dangerous situations for human health and the environment. In this study we have evaluated the effectivity of TiO2 photocatalysis using solar irradiation for the degradation of four contaminants (diclofenac, ibuprofen, ketoprofen and sulfadiazine) in different soil matrices. Influential parameters of photocatalytic process (TiO2 dosage and soil moisture content) were optimized at laboratory scale using UV-LED lamps as light source. Solar remediation trial was performed exposing polluted soils to different treatments (in presence and absence of photocatalyst) during August 2023. After 50 h of solar exposure degradations of these pharmaceuticals reached 97.8–99.5 %, 99.7–100 % and 83.2–97.5 % for soils S1, S2 and S3 respectively. For all compounds, removal followed the order S2 > S1 > S3, in coincidence with the lesser organic matter content of soils. Results suggest that TiO2 photocatalysis under sunlight irradiation could be a useful tool for remediating soils polluted with pharmaceutical residues.

Visible-Light-Driven Z-Type Pg-C3N4/Nitrogen Doped Biochar/BiVO4 Photo-Catalysts for the Degradation of Norfloxacin.

Antibiotics cannot be effectively removed by traditional wastewater treatment processes, and have become widespread pollutants in various environments. In this study, a Z-type heterojunction photo-catalyst Pg-C3N4 (PCN)/Nitrogen doped biochar (N-Biochar)/BiVO4 (NCBN) for the degradation of norfloxacin (NOR) was prepared by the hydrothermal method. The specific surface area of the NCBN (42.88 m2/g) was further improved compared to BiVO4 (4.528 m2/g). The photo-catalytic performance of the catalyst was investigated, and the N-Biochar acted as a charge transfer channel to promote carrier separation and form Z-type heterojunctions. Moreover, the NCBN exhibited excellent performance (92.5%) in removing NOR, which maintained 70% degradation after four cycles. The main active substance of the NCBN was •O2-, and the possible degradation pathways are provided. This work will provide a theoretical basis for the construction of heterojunction photo-catalysts.

Case study on water quality index for wastewater treatment in Mumbai

Abstract The traditional wastewater treatment process is laborious and demanding in terms of time, energy, and space. With rapid advancements, there's a quest for more efficient techniques that can achieve comparable treatment outcomes while minimizing these demands. This study proposes a solution by employing ozone as an Advanced Oxidation Process (AOP) to expedite the treatment while enhancing the water quality. The Water Quality Index (WQI) offers a consolidated representation of overall water quality by considering multiple quality parameters. Although typically used for assessing surface water quality, this study utilizes WQI to gauge the enhancement in parameters post-treatment. The research investigates the impact of varied ozone doses on raw sewage samples collected from four different sites in Mumbai, focusing on parameters such as dissolved oxygen, turbidity, hardness, chemical oxygen demand (COD), and WQI. The results demonstrate a notable percentage enhancement in WQI, ranging from 30 to 60% across various sites within a short 25-minute timeframe, attributed to the application of ozone.

Anthropogenic gadolinium sources and remediation in highly urbanized river in the Beijing-Tianjin-Hebei (BTH) region, China: Insights from buffer zone and three-dimensional tracer system

As a newly emerging microcontaminant, rare earth elements (REEs), especially gadolinium (Gd) in surface water, are attracting great environmental concern in large urban cities. The Beijing-Tianjin-Hebei (BTH) region stands as the preeminent urban agglomeration in northern China, whereas the riverine Gd characteristics and environmental impacts on this region remain inadequate. This study analyzed 27 river water samples in BTH, all of which displayed evidently positive Gd anomalies ranging 1.44–290.75. Spearman correlation indicated the positively correlated REEs concentrations in river water with urban land and cultivated land. A three-dimensional tracing system was established involving anthropogenic Gd (Gdanth) and conventional ion ratios (NO3−/Na+, Cl−/Na+). This system effectively discerned the influences originating from sewage treatment plants, wastewater treatment plants, hospitals, and factories within the BTH region. Gd-based contrast agents (GBCAs) manifest notable potential ecological toxicity and adverse health effects when getting exposed. However, traditional wastewater treatment methods demonstrate limited efficacy in removing these pollutants completely from urban water. To deal with this challenge, this study proposed a new method by combining the latest GBCAs remediation technology with mixing membrane wastewater treatment. This technology may shed light on the potential of an economical and operational procedure of handling medical wastewater specifically in urban water.

Research progress of anaerobic ammonium oxidation (Anammox) process based on integrated fixed-film activated sludge (IFAS).

The integrated fixed-film activated sludge (IFAS) process is considered one of the cutting-edge solutions to the traditional wastewater treatment challenges, allowing suspended sludge and attached biofilm to grow in the same system. In addition, the coupling of IFAS with anaerobic ammonium oxidation (Anammox) can further improve the efficiency of biological denitrification. This paper summarises the research progress of IFAS coupled with the anammox process, including partial nitrification anammox, simultaneous partial nitrification anammox and denitrification, and partial denitrification anammox technologies, and describes the factors that limit the development of related processes. The effects of dissolved oxygen, influent carbon source, sludge retention time, temperature, microbial community, and nitrite-oxidising bacteria inhibition methods on the anammox of IFAS are presented. At the same time, this paper gives an outlook on future research focus and engineering practice direction of the process.

Progress of organic wastewater degradation by atmospheric pressure gliding arc plasma technology: A review

The prevention and treatment of organic pollutants in wastewater have attracted extensive attention because they threaten ecological balance and human health. Traditional wastewater treatment technologies, such as physical, chemical, biological methods, etc., are still limiting and challenging due to some factors, such as high energy consumption, chemical agents, low efficiency, and secondary pollution. At present, gliding arc plasma, based on equilibrium/non-equilibrium in plasma temperature, demonstrates itself to be one of the most promising technologies for the degradation of refractory organics with its fast degradation rates, no secondary contamination, high efficiency, and so on. The theoretical mechanisms and typical applications of gliding arc plasma degradation of wastewater are introduced in detail in this paper. The physical and chemical characteristics of gliding arc plasma and the role of the reactive species in the plasma are reviewed.

Exploring the Potential of Green Microalgae-Based Phycoremediation Treated Wastewater for Sustainable Concrete Production

Wastewater pollution from domestic, industrial, and agricultural sources threatens the environment and human health. Traditional wastewater treatment methods are energy intensive, generate significant sludge, and may not remove all contaminants. This study explores the use of microalgae, Chlorella sorokinianana, to treat wastewater and evaluates its impact on concrete properties. The research aims to optimize microalgae growth conditions, set up nutrient-rich growth chambers, develop biomass separation methods, and assess the effects of microalgae-treated wastewater on concrete. Scanning electron microscopy (SEM) was used to analyze concrete structures produced with microalgae-treated wastewater, freshwater, and sewage treatment plant (STP) water. Concrete from microalgae-treated wastewater exhibited euhedral crystals with pronounced gaps, while freshwater concrete had denser subhedral to anhedral crystals. STP water concrete consistently had lower strength values, possibly due to impurities affecting cement hydration. Microalgae-treated water concrete showed intermediate strength levels, suggesting organic or biological factors may influence hydration, but it still gained strength with time. This study underscores the potential of microalgae-treated wastewater for sustainable concrete production, highlighting the importance of further research to optimize conditions and promote environmentally friendly construction practices.

Review of emerging technologies for nutrient removal in wastewater treatment

The burgeoning global population and industrial activities have significantly increased the generation of wastewater laden with nutrients, posing severe environmental and public health concerns. Traditional wastewater treatment methods often fall short in effectively removing nutrients like nitrogen and phosphorus, leading to eutrophication of water bodies and endangering aquatic ecosystems. In response, emerging technologies for nutrient removal in wastewater treatment have gained traction in recent years, offering innovative and efficient solutions to mitigate nutrient pollution. This comprehensive review explores the latest advancements in nutrient removal technologies, encompassing biological, physical, and chemical processes. Biological treatment methods, including activated sludge, sequencing batch reactors (SBRs), and membrane bioreactors (MBRs), have been extensively studied and optimized for nutrient removal. Novel biofilm-based systems, such as moving bed biofilm reactors (MBBRs) and integrated fixed-film activated sludge (IFAS), have demonstrated enhanced nutrient removal capabilities and resilience to fluctuations in wastewater composition. Furthermore, the integration of advanced oxidation processes (AOPs) and membrane technologies has revolutionized nutrient removal from wastewater. AOPs, such as ozonation, ultraviolet (UV) irradiation, and photocatalysis, offer effective means to degrade recalcitrant organic pollutants and disrupt nutrient cycles. Membrane-based technologies, including reverse osmosis (RO), nanofiltration (NF), and forward osmosis (FO), enable selective nutrient removal and concentration, thereby producing high-quality effluent suitable for reuse or discharge into sensitive environments. Additionally, the review delves into emerging chemical treatment strategies, such as adsorption, precipitation, and ion exchange, for targeted removal of nutrients from wastewater streams. Advanced adsorbents and nanomaterials exhibit superior adsorption capacities and selectivity for nitrogen and phosphorus compounds, paving the way for cost-effective nutrient recovery and resource recycling. Moreover, the review highlights the importance of process optimization, system integration, and environmental sustainability in the development and deployment of emerging nutrient removal technologies. Life cycle assessments (LCAs) and techno-economic analyses provide valuable insights into the environmental footprint and economic viability of these innovative solutions, guiding decision-makers towards sustainable wastewater management practices. In conclusion, the synthesis of biological, physical, and chemical processes in emerging nutrient removal technologies holds great promise for addressing the challenges of nutrient pollution in wastewater treatment. Future research directions should focus on scalability, energy efficiency, and holistic approaches towards achieving water quality goals and fostering a circular economy.

A Critical Review of Green Approach on Wastewater Treatment Strategies

Green approach on wastewater treatment strategies aims to promote sustainable and environmentally friendly methods for treating wastewater while also reducing the environmental impact of traditional wastewater treatment processes. Hence, the objective of this paper was to undertake a critical review of green approach on wastewater treatment strategies using standard techniques of harvesting data from secondary sources from 2015 to 2023. Information obtained reveals that energy-efficient treatment technologies, such as anaerobic digestion and membrane bioreactors, use less energy than traditional treatment technologies. Treating wastewater for reuse can reduce the demand for freshwater resources and the energy required for water treatment. Onsite wastewater treatment systems, such as septic systems and composting toilets, can reduce the amount of wastewater that needs to be transported and treated at centralized facilities. Incorporating green infrastructure, such as rain gardens and permeable pavement, into urban areas can help reduce the amount of stormwater runoff that enters the wastewater treatment system. Extracting nutrients, such as nitrogen and phosphorus, from wastewater can be used as a fertilizer for crops, reducing the need for synthetic fertilizers. Overall, these green wastewater treatment strategies aim to reduce the energy consumption, chemical usage, and environmental impact of traditional wastewater treatment processes, while promoting sustainable and efficient use of resources.

Intensifying the simultaneous removal of nitrogen and phosphorus of an integrated aerobic granular sludge-membrane bioreactor by Acinetobacter junii

This work aims at intensifying the simultaneous removal of nitrogen and phosphorus of an integrated aerobic granular sludge (AGS) - membrane bioreactor (MBR) by Acinetobacter junii. After acclimation and enrichment in a sequencing batch reactor (SBR), Acinetobacter junii, a kind of denitrifying phosphate accumulating organism (DPAO), was successfully screened in the used SBR. Then it was verified to be capable of effectively enhancing the performance in the simultaneous removal of nitrogen and phosphorus of AGS-MBR. In the system, DPAO (Acinetobacter junii) mainly occurred in AGS, and the highest ratio even reached 22.8%, but its competitive advantages highly depend on the size of AGS. The presented results can cultivate AGS and enrich DPAO simultaneously to improve the removal of nitrogen and phosphorus of an AGS-MBR, which provide an environmentally friendly approach to upgrade traditional wastewater treatment processes.

Statistical Study of Membrane Performance for Different Pharmaceutical Compounds Removal

One of the most important emerging pollutants is pharmaceutical active compounds, which may be responsible, for example, for ecotoxicological changes and microbiological resistance. Wastewater treatment plants are not adequately equipped to remove all of the emerging pollutants contained in the wastewater. The ultrafiltration process has been proven to be effective in traditional wastewater treatment, so it is important to assess the performance of such a technique in the partial elimination of pharmaceutical compounds to avoid contamination. In this work, an assessment of ultrafiltration process operating conditions for eliminating six pharmaceutical compounds: Ibuprofen, Acetaminophen, Naproxen, Diclofenac, Caffeine, and trimethoprim, present in different types of water is performed. Experimental design is a systematic and structured approach to conducting experiments, and its application can significantly improve the study of membrane technology, reducing the number of assays necessary to obtain meaningful results. The statistical principles application ensures that the results obtained are reliable and representative of the true effects of the variables being studied. Its application helps to obtain valid conclusions from the data and provides a solid basis for making decisions or recommendations regarding the tests and variables to take into account. Membrane processes can involve complex interactions between several factors. Experimental design helps to identify and understand these interactions, allowing researchers to discern the combined effects of different variables. This is crucial to accurately predict and optimize membrane performance. In this work, ANOVA analysis has been carried out in order to determine the influence of membrane cut-off, solution pH, and feed concentration, as well as their interactions, in permeate flux and the rejection index. The results obtained show similar behavior for Ibuprofen, Naproxen, Diclofenac, and Trimethoprim, being the pH the most important factor. However, no significant factors were found for the acetaminophen and the Caffeine.

The First Evidence of the Water Bioremediation Potential of Ficopomatus enigmaticus (Fauvel 1923): From Threat to Resource?

Each year, a staggering 700,000 tons of synthetic dyes are manufactured globally, leading to the release of dye-laden wastewater into aquatic systems. These synthetic dyes resist biodegradation, endangering human and environmental health. Since traditional wastewater treatments are basically unable to remove dyes, exploring the potential of alternative solutions, such as bioremediation, is crucial to reduce dye contamination in aquatic ecosystems. Ficopomatus enigmaticus (Fauvel 1923), listed as one of the 100 worst invasive species in Europe, is considered an invasive ecosystem engineer capable of causing economic and ecological losses. Despite this negative status, the literature suggests its positive contributions to aquatic ecosystems as habitat former and water bioremediator. However, existing evidence on the potential of F. enigmaticus to improve water quality is fragmented and lacks experimental data from laboratory tests. This study examined the potential of Ficopomatus reefs, both living and dead, to enhance water quality by removing contaminants, focusing on methylene blue (MB), one of the most common synthetic dyes. Bioaccumulation and bioadsorption were identified as key mechanisms for dye removal, supported by ATR-FTIR and microscopic analyses. Ficopomatus efficiently removed up to 80% of MB within 24 h. Bioaccumulation in the soft body accounted for 18% of the total removal, while complex adsorption phenomena involving carbonaceous, microalgal, and organic reef components accounted for 82%. Surprisingly, bioremediated solutions exhibited significant effects in ecotoxicological tests on bacteria, indicating the potential of F. enigmaticus to disrupt bacterial quorum sensing related to biofilm formation, and suggesting a possible antifouling action. This study underscores the intricate interplay between F. enigmaticus, water quality improvement, and potential ecological consequences, stressing the need for further investigation into its multifaceted role in aquatic ecosystems.

Methods for eliminating micropollutant from wastewater: A review

The amount of suspended solid and medicinal micropollutants, such as fungicides, personal care products, contraceptive medications, antibiotics and aromatic hydrocarbons are increasing daily and has reached an alarming level. The micropollutant present in wastewater must be treated before its release because it forms adverse effect on mortal health. Because some harmful micropollutants are incredibly difficult to remove from WWTPs because of their nonbiodegradability, poor adsorption capability, complex nature and traditional wastewater treatments are precious or insufficient for decontamination. For the micropollutant declination some of the conventional physicochemical has been used. The use of powdered activated carbon (PAC) for water purification has been proven to be effective without harming the environment. Advanced oxidation technologies (AOTs), typically applied after natural processes have recently emerged as effective tertiary treatments for the withdrawal of micropollutants at high concentrations. Various methods have been developed and studied for the removal of these micropollutants from wastewater. This review aims to provide a comprehensive overview of the different methods employed, including physical, chemical, and biological processes, highlighting their effectiveness and limitations in micropollutant removal. As well as improving treatment efficiency, they can also remove any accumulation of dangerous byproducts produced during treatment.

Comprehensive two-dimensional liquid chromatography with high resolution mass spectrometry to investigate the photoelectrochemical degradation of environmentally relevant pharmaceuticals and their degradation products in water

The widespread presence of organic micropollutants in the environment reflects the inability of traditional wastewater treatment plants to remove them. In this context, advanced oxidation processes (AOPs) have emerged as promising quaternary wastewater treatment technologies since they efficiently degrade recalcitrant components by generating highly reactive free radicals. Nonetheless, the chemical characterization of potentially harmful byproducts is essential to avoid the contamination of natural water bodies with hazardous substances. Given the complexity of wastewater matrices, the implementation of comprehensive analytical methodologies is required. In this work, the simultaneous photoelectrochemical degradation of seven environmentally relevant pharmaceuticals and one metabolite from the EU Watch List 2020/1161 was examined in ultrapure water and simulated wastewater, achieving excellent removal efficiencies (overall >95%) after 180 min treatment. The reactor unit was linked to an online LC sample manager, allowing for automated sampling every 15 min and near real-time process monitoring. Online comprehensive two-dimensional liquid chromatography (LC × LC) coupled with high resolution mass spectrometry (HRMS) was subsequently used to tentatively identify degradation products after photoelectrochemical degradation. Two reversed-phase liquid chromatography (RPLC) columns were used: an SB-C18 column operated with 5 mM ammonium formate at pH 5.8 (1A) and methanol (1B) as the mobile phases in the first dimension and an SB-Aq column using acidified water at pH 3.1 (2A) and acetonitrile (2B) as the mobile phases in the second dimension. This resulted in a five-fold increase in peak capacity compared to one-dimensional LC while maintaining the same total analysis time of 50 min. The LC x LC method allowed the tentative identification of 12 venlafaxine, 7 trimethoprim and 10 ciprofloxacin intermediates. Subsequent toxicity predictions suggested that some of these byproducts were potentially harmful.This study presents an effective hybrid technology for the simultaneous removal of pharmaceuticals from contaminated wastewater matrices and demonstrates how multidimensional liquid chromatography techniques can be applied to better understand the degradation mechanisms after the treatment of micropollutants with AOPs.

A review of microbial fuel cell and its diversification in the development of green energy technology

The advancement of microbial fuel cell technology is rapidly growing, with extensive research and well-established methodologies for enhancing structural performance. This terminology attracts researchers to compare the MFC devices on a technological basis. The architectural and scientific successes of MFCs are only possible with the knowledge of engineering and technical fields. This involves the structure of MFCs, using substrates and architectural backbones regarding electrode advancement, separators and system parameter measures. Knowing about the MFCs facilitates the systematic knowledge of engineering and scientific principles. The current situation of rapid urbanization and industrial growth is demanding the augmented engineering goods and production which results in unsolicited burden on traditional wastewater treatment plants. Consequently, posing health hazards and disturbing aquatic veracity due to partial and untreated wastewater. Therefore, it's sensible to evaluate the performance of MFCs as an unconventional treatment method over conventional one to treat the wastewater. However, MFCs some benefits like power generation, stumpy carbon emission and wastewater treatment are the main reasons behind the implementation. Nonetheless, few challenges like low power generation, scaling up are still the major areas needs to be focused so as to make MFCs sustainable one. We have focused on few archetypes which majorities have been laboratory scale in operations. To ensure the efficiency MFCs are needed to integrate and compatible with conventional wastewater treatment schemes. This review intended to explore the diversification in architecture of MFCs, exploration of MFCs ingredients and to provide the foreseen platform for the researchers in one source, so as to establish the channel for scaling up the technology. Further, the present review show that the MFC with different polymer membranes and cathode and anode modification presents significant role for potential commercial applications after change the system form prototype to pilot scale.

Mechanistic insights and DFT analysis of bimetal doped styrofoam-like LaFeO3 perovskites with in-built dual redox couples for enhanced Photo-Fenton degradation of Tetracycline

The rising number of contaminants released into the environment and the inadequacies of traditional wastewater treatment techniques have led to the demand for enhanced oxidation technologies like photo-Fenton. In this study, bimetal co-doped lanthanum orthoferrite (BixLa1-xCuyFe1-yO3 (x = 0, 0.01, 0.05, 0.1; y = 0, 0.01, 0.05, 0.1, 0.15)) based photo-Fenton catalysts with the in-built redox couples Fe3+/Fe2+, Cu2+/Cu+ and oxygen vacancies have been successfully synthesised via a facile one-pot solution combustion route. Systematic studies show that the Bi0.05La0.95Cu0.1Fe0.9O3 (LFOBC) exhibits an optimal photo-Fenton degradation rate of 0.0497/min for Tetracycline (TC) removal, being ∼ 1.8 and ∼ 6.2 times greater than Bi0.05La0.95FeO3 (LFOB) and pristine LaFeO3 (LFO) respectively. DFT analysis confirmed the better adsorption and dissociation of H2O2 on a bimetal co-doped catalyst and identified the electron density difference in LFOBC, which can induce the H2O2 dissociation. A detailed investigation of various influencing reaction parameters is explored. The degradation pathway for the LFOBC catalyst with the toxicological characteristics of each intermediate is analysed. This study presents the Bi0.05La0.95Cu0.1Fe0.9O3 as a potential photocatalyst for enhanced photo-Fenton degradation with excellent efficiency observed for the degradation of various harmful pollutants for environmental remediation.