Tracheid Wall Thickness Research Articles

The effect of fire on tree-ring width and tracheid dimensions of Pinus nigra

Summary Forest fires play a significant role in the growth and development of trees because they can damage the phloem and cambium. Fire injury induces the formation of fire scars that can cause xylem dysfunction. The study area is located in Taşköprü, Kastamonu (Western Black Sea of Turkiye), where two forest fires occurred in 1957 and 2020. In this study, the effect of the 1957 fire on the tree-ring widths and tracheid dimensions of Pinus nigra trees was investigated. We measured tree-ring widths and tracheid dimensions of fire-scarred (FS) and unscarred (UF) trees during four different periods: the pre-fire period (1947–1956), fire event year (1957), and post–fire periods (1958–1967 and 2011–2020). In this study, UF trees showed almost 2.5–3 times wider tree–ring widths (TRWs) than FS trees. FS and UF trees also showed great variation in tracheid dimensions in the four different periods; the average tracheid diameter (TD), lumen area (TLA), and wall thickness (TWT) values increased significantly in UF trees compared to FS trees during the fire event and post-fire periods. The average TD, TLA, and average tracheid lumen diameter (TLD) decreased during the fire and post-fire years in the FS trees. In this study, we suggest that fire injury significantly affects the tracheid dimensional traits of FS Pinus nigra trees. Our results also suggest that although Pinus nigra trees experienced serious fire damage, they continued to grow but with a decrease in tracheid size.

Coordination of pinna, petiole, and root anatomical traits in 24 tropical-subtropical fern species.

Ferns are primitive vascular plants with diverse morphologies and structures. Plant anatomical traits and their linkages can reflect adaptation to the environment; however, these remain are still poorly understood in ferns. The main objective of this study was to explore whether there was structural coordination among and within organs in fern species. We measured 16 hydraulically related anatomical traits of pinnae, petioles, and roots of 24 representative fern species from the tropical and subtropical forest understory and analyzed trait correlation networks. In addition, we examined phylogenetic signals for the anatomical traits and analyzed co-evolutionary relationships. These results indicated that stomatal density and all petiole anatomical traits exhibited significant phylogenetic signals. Evolutionary correlations were observed between the tracheid diameter and wall thickness of the petiole and between the water transport capacity of the petiole and stomatal density. Conversely, anatomical traits of roots (e.g., root diameter) showed no phylogenetic signals and were not significantly correlated with those of the pinnae and petioles, indicating a lack of structural coordination between the below- and above-ground organs. Unlike angiosperms, vein density is unrelated to stomatal density or pinna thickness in ferns. As root diameter decreased, the cortex-to-stele diameter ratio decreased significantly (enhanced water absorption) in angiosperms but remained unchanged in ferns. These differences lead to different responses of ferns to climate change and improve our knowledge of the water adaptation strategies of ferns.

Development of Spatiotemporal Whole-Stem Models for Estimating End-Product-Based Fibre Attribute Determinates for Jack Pine and Red Pine

The objective of this study was to develop spatiotemporal whole-stem wood quality prediction models for a suite of end-product-based fibre attribute determinates for jack pine (Pinus banksiana Lamb.) and red pine (Pinus resinosa Aiton): specifically, for wood density (Wd), microfibril angle (Ma), modulus of elasticity (Me), fibre coarseness (Co), tracheid wall thickness (Wt), tracheid radial diameter (Dr), tracheid tangential diameter (Dt), and specific surface area (Sa). Procedurally, these attributes were determined for each annual ring within pith-to-bark xylem sequences extracted from 610 jack pine and 223 red pine cross-sectional disks positioned throughout the main stem of 61 jack pine and 54 red pine sample trees growing within even-aged monospecific stands in central Canada. Deploying a block cross-validation-like approach in order to reduce serial data dependency and enable predictive performance assessments, species-specific calibration and validation data subsets consisting of cumulative moving average values were systematically generated from the 27,820 jack pine and 11,291 red pine attribute-specific annual ring values. Graphical, correlation, regression and validation analyses were used to specify, parameterize and assess the predictive performance of tertiary-level (ring-disk-tree) hierarchical mixed-effects whole-stem equations for each attribute by species. As a result, the jack pine equations explained 46, 66, 74, 63, 59, 72, 42 and 48% of the variation in Wd, Ma, Me, Co, Wt, Dr, Dt and Sa, respectively. The red pine equations explained slightly higher levels of variation except for Me: 50, 71, 31, 83, 72, 78, 56 and 71% of the variation in Wd, Ma, Me, Co, Wt, Dr, Dt and Sa, respectively. Graphical assessments and statistical metrics related to attribute and species-specific residual error patterns and goodness-of-fit, lack-of-fit and predictive error metrics, revealed an absence of systematic bias, misspecification or aberrant predictive performance. Consequently, the resultant parameterized models were acknowledged as acceptable functional descriptors of the intrinsic spatiotemporal cumulative developmental patterns of the studied end-product fibre attribute determinates, for these two pine species. Although predicted development patterns were similar between the species with the greatest degree of nonlinearity occurring before a cambial age of approximately 30 years, irrespective of attribute, jack pine exhibited a greater degree of nonlinearity in the Wd and Dt developmental trajectories, whereas red pine exhibited a greater degree of nonlinearity in the Ma, Me, Co, Wt, Dr and Sa developmental trajectories. Potential biomechanical linkages underlying the observed attribute distribution patterns, as well as the potential utility of the models in forest management, are also discussed.

Anatomical characteristics of the leaning stem in Pinus merkusii seedling

Abstract. Safitri NM, Prastiwi FW, Salsabila S, Feriawan Y, Brilianto A, Nugroho WD. 2023. Anatomical characteristics of the leaning stem in Pinus merkusii seedling. Biodiversitas 24: 3796-3802. Pinus merkusii Jungh. & de Vriese is one of the tropical conifer species. The species formed reaction wood called compression wood (CW) when the stem grows in an abnormal position. CW in stem wood is frequently found to cause several problems for utilization in the use of its products. However, there are few studies on the anatomical characteristics of reaction wood in tropical conifer. This study aimed to observe the differences in anatomical characteristics between compression (CW) and opposite (OW) woods in leaning the stem of P. merkusii seedlings and their anatomical differences compared to normal wood (NW). Approx. 1-year-old P. merkusii seedlings from a nursery in Trenggalek, East Java, Indonesia, that were naturally bent or tilted were used in the study. Anatomical characteristics of wood, namely the dimension of tracheids, rays, resin canals, and the proportion of cells were observed in the study. The results showed that CW of P. merkusii seedlings formed a rounded tracheid shape and intercellular space. The differences between CW and OW in P. merkusii seedlings were significant in terms of height of ray cells, tracheid proportion, and resin canal proportion. However, tracheid length, tracheid diameter, tracheid wall thickness, resin canal diameter and frequency, rays frequency, and ray proportion were not significantly different compared to OW and NW.

Variation in Tracheid Dimensions of Conifer Xylem Reveals Evidence of Adaptation to Environmental Conditions.

Globally distributed extant conifer species must adapt to various environmental conditions, which would be reflected in their xylem structure, especially in the tracheid characteristics of earlywood and latewood. With an anatomical trait dataset of 78 conifer species growing throughout China, an interspecific study within a phylogenetic context was conducted to quantify variance of tracheid dimensions and their response to climatic and soil conditions. There was a significant difference in tracheid diameter between earlywood and latewood while no significant difference was detected in tracheid wall thickness through a phylogenetically paired t-test. Through a phylogenetic principle component analysis, Pinaceae species were found to be strongly divergent in their tracheid structure in contrast to a conservative tracheid structure in species of Cupressaceae, Taxaceae, and Podocarpaceae. Tracheid wall thickness decreased from high to low latitudes in both earlywood and latewood, with tracheid diameter decreasing for latewood only. According to the most parsimonious phylogenetic general least square models, environment and phylogeny together could explain about 21∼56% of tracheid structure variance. Our results provide insights into the effects of climate and soil on the xylem structure of conifer species thus furthering our understanding of the trees’ response to global change.

Mapping variation of handsheet properties within loblolly pine trees

Abstract Within-tree variation of four handsheet properties (burst index, sheet density, STFI short-span compression strength (STFI) and tensile index) was mapped for loblolly pine trees aged 13 and 22 years using NIR predicted handsheet property data (representing an average of 18 trees for each age). All within-tree maps were similar demonstrating a radial decrease in handsheet properties at all heights, with sheet density and tensile index having the greatest within-tree variation. The corewood zone had the highest values for all properties, while the lowest values were observed in a region consistent with juvenile and transitional outerwood as defined by Burdon et al. (2004). The maps are also similar to, but the inverse of, maps reported in prior studies for density and tracheid coarseness and wall thickness. Relationships amongst the examined handsheet properties and wood and tracheid properties explains the overall similarities of the different maps. The maps provide a representation of within-tree variation of important paper properties at two different ages. An understanding of how these properties vary within loblolly pine trees can aid in better utilization of forest resources.

THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS

The altitude is an important factor to affect the growth and development of saplings of the tree. However, the effect of altitude on the growth and properties of wood during their young stage it has been little studied. This study, therefore, aimed to evaluate the influence of two different altitude steps: 795 m (a.s.l. low-altitude) and 1350 m (a.s.l. high altitude) on the morphological, anatomical and wood density properties of saplings of Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen (Trojan fir). Trojan fir is an endemic species in Turkey and its morphology and anatomy have less studied in the literature. The functional traits and wood density properties differed significantly between the two altitudes. The saplings grown at low-altitude showed greater taper degree, pith radius, pith proportion, and bark proportion than high-altitude. However, stem height, stem diameter, node number, and xylem proportion were found to be higher in saplings grown at high-altitude than low-altitude. Wood cell anatomy also varied significantly between two altitudes such that ring width, ray numbers, tracheid length, and tracheid width were higher at low-altitude, whereas ray height, ray width, tracheid lumen width, and tracheid wall thickness were greater at high-altitude. This study, therefore, suggested that the growth and development of fir saplings were better when they were grown at high-altitude than low-altitude.

Changes in wood anatomical traits in Scots pine under different climate-change scenarios

Abstract Although cell-anatomical variables are promising proxies reflecting seasonal as well as annual climate changes, their interdependencies are not yet fully understood. In the present study we assessed the changes in tree-ring width and various wood anatomical traits, including wall thickness, lumen diameter and tracheid diameter in the radial direction in saplings of Pinus sylvestris under six climatic conditions: 5°C warmer alone (ET) or combined with drought in June (ETJ) and in August (ETA) and CO2 enrichment alone (EC, 770 ppm) or combined with drought in June (ECJ) and in August (ECA). The experiments related to temperature conditions using 2-year saplings and CO2 conditions using 3-year saplings were completed in 2009 and 2010 in a greenhouse, respectively. Results showed that tree-ring width and tracheid diameter were not affected by any of the conditions applied, but the lumen diameter was larger and the wall thickness was thinner than those under control conditions. These reactions were verified under ETJ in the warming treatment and under all conditions under CO2 enrichment conditions. Our results indicated that drought counteracted the effects of elevated CO2 concentrations on wood anatomical properties, signifying complex interactions between the two major effects of climate change. Our comparison of wood parameters through experiments highlight the potential effect of climate change — increased drought stress due to higher temperatures and water shortage as well as elevated ambient CO2, on tracheid lumen diameter and wall thickness. Whereas the ring-width and tracheid diameter practically remained unaffected under the above-mentioned conditions.

Anatomical and Morphological Changes with Needle Removal Treatments on the Seedlings of Pinus nigra Arn. (Anatolian black pine)

The effect of needle removal treatments on the morphology, anatomy and wood density was less studied in the literature. Therefore, the aim this study was to investigate the effect of needle removal on the morphological, anatomical and wood density properties of the seedlings of Pinus nigra Arn. (Anatolian black pine). The needles of the seedlings were removed in four different amounts (0%, 25%, 50% and 75%) to determine whether there is a relationship between the properties of seedlings and the needle removal treatments. The morphological (stem diameter, node numbers, pith percentage, bark percentage, xylem percentage), anatomical properties (average annual ring width, tracheid number per mm2, tracheid height/width, tracheid lumen width, tracheid wall thickness, ray number per mm2, ray height/width) and wood densities were individually determined for each treatment. The morphological results showed that stem diameter was greatest in 0% and 25% needle removal treatments than that of two treatments. Bark% was also found to be higher in the 0% needle removal treatments than others. However, node numbers, pith% and xylem% did not differ significantly between four removal treatments. The density results showed that the seedlings of 0% and 25% needle treatments were denser than 50% and 75% needle removal treatments. The results of anatomical analysis also found surprising results between four treatments. Ray height/width, tracheid number per mm2and tracheid length were significantly greater in the 0% removal of needles than that of three treatments. 25% needle removal treatment also showed larger tracheid area and tracheid wall thickness than that of three needle removal treatments.

Acoustic-Based Prediction of End-Product-Based Fibre Determinates within Standing Jack Pine Trees

The objective of this study was to specify, parameterize, and evaluate an acoustic-based inferential framework for estimating commercially-relevant wood attributes within standing jack pine (Pinus banksiana Lamb) trees. The analytical framework consisted of a suite of models for predicting the dynamic modulus of elasticity (me), microfibril angle (ma), oven-dried wood density (wd), tracheid wall thickness (wt), radial and tangential tracheid diameters (dr and dt, respectively), fibre coarseness (co), and specific surface area (sa), from dilatational stress wave velocity (vd). Data acquisition consisted of (1) in-forest collection of acoustic velocity measurements on 61 sample trees situated within 10 variable-sized plots that were established in four mature jack pine stands situated in boreal Canada followed by the removal of breast-height cross-sectional disk samples, and (2) given (1), in-laboratory extraction of radial-based transverse xylem samples from the 61 disks and subsequent attribute determination via Silviscan-3. Statistically, attribute-specific acoustic prediction models were specified, parameterized, and, subsequently, evaluated on their goodness-of-fit, lack-of-fit, and predictive ability. The results indicated that significant (p ≤ 0.05) and unbiased relationships could be established for all attributes but dt. The models explained 71%, 66%, 61%, 42%, 30%, 19%, and 13% of the variation in me, wt, sa, co, wd, ma, and dr, respectively. Simulated model performance when deploying an acoustic-based wood density estimate indicated that the expected magnitude of the error arising from predicting dt, co, sa, wt, me, and ma prediction would be in the order of ±8%, ±12%, ±12%, ±13%, ±20%, and ±39% of their true values, respectively. Assessment of the utility of predicting the prerequisite wd estimate using micro-drill resistance measures revealed that the amplitude-based wd estimate was inconsequentially more precise than that obtained from vd (≈ <2%). A discourse regarding the potential utility and limitations of the acoustic-based computational suite for forecasting jack pine end-product potential was also articulated.

Palaeocupressinoxylon uniseriale n. gen. n. sp., a gymnospermous wood from the upper Permian of Central Taodonggou, southern Bogda Mountains, northwestern China

A silicified wood, Palaeocupressinoxylon uniseriale n. gen. n. sp., is described from the upper Permian of the Central Taodonggou section, Turpan–Hami Basin, Xinjiang Uygur Autonomous Region, northwestern China. Multidisciplinary data including U–Pb ID–TIMS zircon dating, vertebrate and invertebrate biostratigraphic, and cyclostratigraphic correlation from current and previous studies indicate that the fossil bearing interval is Wuchiapingian (late Permian) in age. The pycnoxylic wood consists of thick-walled tracheids and parenchymatous rays. It is characterized by separated uniseriate radial tracheidal pits, uniseriate ray cells, and cupressoid cross-field pitting. The absence of growth rings in the wood, together with the occurrence of Argillisols, Gleysols, and Histosols above and below the fossil interval, suggests that a stable landscape and a perennially humid climate prevailed in the Taodonggou area during the Wuchiapingian.

A new Protophyllocladoxylon wood from the Induan (Lower Triassic) Jiucaiyuan Formation in the Turpan–Hami Basin, southern Bogda Mountains, northwestern China

A silicified gymnospermous wood, Protophyllocladoxylon zhaobishanensis sp. nov., is described from the Induan (Lower Triassic) Jiucaiyuan Formation in Zhaobishan section, Shanshan County, southern Bogda Mountains, Xinjiang Uygur Autonomous Region, northwestern China. The pycnoxylic wood contains thick-walled tracheids and parenchymatous ray cells. It is characterized by uni- to triseriate araucarian radial tracheidal pitting, uniseriate rays, one to two large, simple pits in each cross-field, and uni- to biseriate tangential tracheidal pits. The presence of distinct and extensive growth rings in all fossil woods from the Induan of the research area were probably caused by the seasonal climate with great precipitation variability during the earliest Triassic in the Turpan–Hami Basin. This is also supported by the occurrence of Calcisols, vertic Calcisols, and calcic Argillisols from coeval deposits nearby. The occurrence of fossil wood with anatomical structures from the Induan confirms that woody gymnosperms, probably conifers, were crucial elements on the Early Triassic landscape in northeastern Pangaea. It appears that some gymnosperms had survived the end-Permian biotic crisis based on the continuous records of Protophyllocladoxylon-type woods from the Wuchiapingian (upper Permian) to Norian (Upper Triassic) in Bogda Mountains.

Wood quality attribute models and their utility when integrated into density management decision-support systems for boreal conifers

The objectives of this study were to (1) develop wood quality prediction models for a suite of commercially-relevant jack pine (Pinus banksiana Lamb.) fibre attributes (wood density (Wd), microfibril angle (Ma), modulus of elasticity (Me), fibre coarseness (Co), tracheid wall thickness (Wt), tracheid radial (Dr) and tangential (Dt) diameters and specific surface area (Sa)), (2) given (1), incorporate the parameterized equations within structural stand density management models (SSDMMs), and (3) given (2), exemplify their utility in silvicultural decision-making via the comparative assessment of attribute outcomes arising from operationally-relevant crop plans. Analytically, the equations were developed deploying Silviscan-determined attributes derived from transverse breast-height radial xylem sequences obtained from 61 trees sampled from 2 geographically-separated thinning experiments located in the central region of the Canadian Boreal Forest Region. Hierarchical mixed-effects regression modeling combined with cross-validation procedures were used to specify, parameterize and evaluate the attribute-specific prediction equations. Overall, the results revealed that the attribute trajectories were size-dependent and the resultant models were adequate in terms of their goodness-of-fit characteristics (e.g., I2 values of 75, 71, 71, 66, 60, 55, 49 and 38% for Co, Me, Wt, Sa, Wd, Ma, Dr and Dt respectively), lack-of-fit indicators (e.g., temporally invariant patterns of absolute and relative errors devoid of evidence of systematic bias), and predictive performance (e.g., 95% probability that 95% of all future relative Dt, Dr, Sa, Wd, Co, Wt, Me and Ma errors would be within ±5, ±9, ±11, ±12, ±12, ±13, ±35 and ±43% of their true values, respectively). Incorporating the jack pine equations along with a similar suite of functions previously developed for black spruce (Picea mariana (Mill) B.S.P) into the SSDMM analytical framework, yielded a pair of enhanced stand-type-specific (natural-origin and planted stands) decision-support systems for each species. These systems enabled the estimation of attribute-specific developmental trajectories for the rotational tree population from which diameter-class and stand-level wood quality performance measures were derived. As exemplified, the development of size-dependent fibre attribute prediction models and their subsequent integration within SSDMMs provides forest managers with a decision-support platform for evaluating and comparing end-product-related consequences of selected crop plans.

Influence of morphometric parameters of relief on macro- and microstructure of wood Pinus silvestris L. in the North of the Russian plain

Pine grows in a variety of environmental conditions which form several of technical properties of wood. The purpose of this study is an analysis of the morphology and the structure (i.e., the annual ring width, the latewood content, the tracheid wall thickness of the early- and latewood) of pine wood growing in areas with different relief and soil condition. The annual ring width and the latewood content don’t have a pronounced dependence on the relief. The tracheid wall thickness of early wood has a high degree of correlation with aspect, photosynthetically active radiation (PAR) and diurnal anisotropic heating – DAH (r = –0.81 to –0.88). The tracheid wall thickness latewood is highly correlated with topographic wetness index and profile curvature (r = 0.88). The relief parameters PAR and DAH, which characterize the distribution of insolation, have a high degree of correlation with the tracheid wall thickness of early wood. In the conditions of the middle taiga subzone the flat relief influences the microstructure of pine wood due to redistribution of heat and moisture.

Siberian spruce tree ring anatomy: imprint of development processes and their high-temporal environmental regulation

Wood anatomy was offered as spatiotemporal proxy record for tracheid differentiation kinetics due to its advantages in terms of much longer cover period and less demanding measurements. In this study, external and internal regulation of earlywood-to-latewood transition and properties of latewood of Picea obovata Ledeb were considered. The values and interrelations between cell number, tree ring width, maximal and mean radial cell diameter, maximal cell wall thickness and position of the transition to thick-walled tracheids were investigated within site and along the altitudinal gradient. Correlations with moving 21-day climatic series were used to estimate high-resolutional external influences. Relationships between tree ring traits are spatially stable and close within one stage of differentiation and between cells production and expansion. Relationships between sites differ in upper and lower parts of the gradient. Most of traits respond to the primary limiting factors near summer solstice; however, maximal cell wall thickness responds positively to the temperatures at the + 10 °C threshold. Altitudinal anatomical patterns revealed interaction of intrinsic and external factors in the regulation of tracheid differentiation. Timing of climatic response highlighted role of photoperiod as a trigger in the earlywood-to-latewood transition, and crucial role of the growth season ending for latewood development.

Acoustic Velocity—Wood Fiber Attribute Relationships for Jack Pine Logs and Their Potential Utility

This study presents an acoustic-based predictive modeling framework for estimating a suite of wood fiber attributes within jack pine (Pinus banksiana Lamb.) logs for informing in-forest log-segregation decision-making. Specifically, the relationships between acoustic velocity (longitudinal stress wave velocity; vl) and the dynamic modulus of elasticity (me), wood density (wd), microfibril angle (ma), tracheid wall thickness (wt), tracheid radial and tangential diameters (dr and dt, respectively), fiber coarseness (co), and specific surface area (sa), were parameterized deploying hierarchical mixed-effects model specifications and subsequently evaluated on their resultant goodness-of-fit, lack-of-fit, and predictive precision. Procedurally, the data acquisition phase involved: (1) randomly selecting 61 semi-mature sample trees within ten variable-sized plots established in unthinned and thinned compartments of four natural-origin stands situated in the central portion the Canadian Boreal Forest Region; (2) felling and sectioning each sample tree into four equal-length logs and obtaining twice-replicate vl measurements at the bottom and top cross-sectional faces of each log (n = 4) from which a log-specific mean vl value was calculated; and (3) sectioning each log at its midpoint and obtaining a cross-sectional sample disk from which a 2 × 2 cm bark-to-pith radial xylem sample was extracted and subsequently processed via SilviScan-3 to derive annual-ring-specific attribute values. The analytical phase involved: (1) stratifying the resultant attribute—acoustic velocity observational pairs for the 243 sample logs into approximately equal-sized calibration and validation data subsets; (2) parameterizing the attribute—acoustic relationships employing mixed-effects hierarchical linear regression specifications using the calibration data subset; and (3) evaluating the resultant models using the validation data subset via the deployment of suite of statistical-based metrics pertinent to the evaluation of the underlying assumptions and predictive performance. The results indicated that apart from tracheid diameters (dr and dt), the regression models were significant (p ≤ 0.05) and unbiased predictors which adhered to the underlying parameterization assumptions. However, the relationships varied widely in terms of explanatory power (index-of-fit ranking: wt (0.53) > me > sa > co > wd >> ma (0.08)) and predictive ability (sa > wt > wd > co >> me >>> ma). Likewise, based on simulations where an acoustic-based wd estimate is used as a surrogate measure for a Silviscan-equivalent value for a newly sampled log, predictive ability also varied by attribute: 95% of all future predictions for sa, wt, co, me, and ma would be within ±12%, ±14%, ±15%, ±27%, and ±55% and of the true values, respectively. Both the limitations and potential utility of these predictive relationships for use in log-segregation decision-making, are discussed. Future research initiatives, consisting of identifying and controlling extraneous sources of variation on acoustic velocity and establishing attribute-specific end-product-based design specifications, would be conducive to advancing the acoustic approach in boreal forest management.

Permineralized Calamitean Axes from the Upper Permian of Xinjiang, Northwest China and Its Paleoecological Implication

Two anatomically preserved calamitean axes are reported for the first time from the Late Permian Wutonggou Formation in the southern Bogda Mountains, Xinjiang Uygur Autonomous Region, Northwest China. Based on the anatomical features, these axes are assigned to Arthropitys. A new species Arthropitys taoshuyuanensis sp. nov. is established. A. taoshuyuanensis sp. nov. possesses a large pith and comprises large pith cavity and a narrow perimedullary zone at the nodes and diaphragms at the internodes. Carinal canals are circular and surrounded by a single layer of metaxylem tracheids. Secondary xylem is divided into interfascicular rays and fascicular wedges. Interfascicular rays are initially four to five cells wide and taper abruptly centrifugally. Fascicular wedge consists of thick-walled tracheids and thin-walled fascicular ray cells. Radial tracheid walls have uniseriate or biseriate circular pits, or scalariform pits. The absence of growth rings in the Arthropitys specimens indicates that they probably lived in the wetland area under stable annual temperature and water sufficient conditions.

Axial xylem architecture ofLarix deciduaexposed to CO2enrichment and soil warming at the tree line

AbstractTrees continuously adjust their axial xylem structure to meet changing needs imposed by ontogenetic and environmental changes. These axial structure–function responses need to be coordinated among competing biophysical constraints to avoid failure of the xylem system. Here, we investigated if ontogeny or experimental manipulation ofCO2and soil temperature influence these structure–function responses.We performed detailed xylem cell anatomical quantification along the axis of 40‐year‐oldLarix deciduatrees planted at the Swiss tree line and exposed to a combination of elevatedCO2(+200 ppm) and soil warming (+4°C) between 2001 and 2012. We assessed how mean hydraulic tracheid diameter (Dh), the cell wall reinforcement ((t/b)2), tracheid wall thickness (CWT) and the percent area of ray parenchyma (PERPAR)—proxies for hydraulic efficiency, hydraulic safety, biomechanical support and metabolic xylem functions, respectively—covary along the tree axis.Dh increased from the stem apex to base, strictly following a power function (R2=0.81), independent from ontogeny and experimental treatments. In contrast, axial trends of(t/b)2and CWT were either influenced by treatment and/or ontogeny, or showed no axial trend (PERPAR). Additionally, we found that a largerDh only at the stem apex promoted primary and secondary growth.Our approach of analysing xylem anatomical traits along the tree axis and across tree rings provides novel insights into xylem functional architecture and allows reconstructing xylem function over time. We conclude that the maintenance of hydraulic efficiency during ontogeny is very robust, that the tracheid diameter undergoes a strong apical control, and plays a fundamental role for assimilation and tree growth. Instead, the other functional traits more plastically vary with ontogeny and environmental changes.Aplain language summaryis available for this article.

Acoustic-Based Non-Destructive Estimation of Wood Quality Attributes within Standing Red Pine Trees

The relationship between acoustic velocity (vd) and the dynamic modulus of elasticity (me), wood density (wd), microfibril angle, tracheid wall thickness (wt,), radial and tangential diameters, fibre coarseness (co) and specific surface area (sa), within standing red pine (Pinus resinosa Ait.) trees, was investigated. The data acquisition phase involved 3 basic steps: (1) random selection of 54 sample trees from 2 intensively-managed 80-year-old plantations in central Canada; (2) attainment of cardinal-based vd measurements transecting the breast-height position on each sample tree; and (3) felling, sectioning and obtaining cross-sectional samples from the first 5.3 m sawlog from which Silviscan-based area-weighted mean attribute estimates were determined. The data analysis phase consisted of applying graphical and correlation analyses to specify regression models for each of the 8 attribute-acoustic velocity relationships. Results indicated that viable relationships were obtained for me, wd, wt, co and sa based on a set of statistical measures: goodness-of-fit (42%, 14%, 45%, 27% and 43% of the variability explained, respectively), lack-of-fit (unbiasedness) and predictive precision (±12%, ±8%, ±7%, ±8% and ±6% error tolerance intervals, respectively). Non-destructive approaches for estimating the prerequisite wd value when deploying the analytical framework were also empirically evaluated. Collectively, the proposed approach and associated results provide the foundation for the development of a comprehensive and precise end-product segregation strategy for use in red pine management.

Yangquanoxylon miscellum gen. nov. et sp. nov., a gymnospermous wood from the Upper Pennsylvanian–lower Permian Taiyuan Formation of Yangquan City, Shanxi Province, with reference to the palaeoclimate in North China

A silicified gymnospermous wood, Yangquanoxylon miscellum gen. nov. et sp. nov., is described from the Upper Pennsylvanian-lower Permian Taiyuan Formation, Yangquan City, Shanxi Province, North China. The pycnoxylic wood is composed of thick-walled tracheids and thin-walled rays. It is characterized by mixed radial tracheid pits, uniseriate and homogeneous rays, occurrence of scalariform radial pitting, and various types of cross-field pitting. There are four types of cross-field pitting in Y. miscellum gen. nov. et sp. nov., including simple, taxodioid, phyllocladoid, and araucarioid. The absence of growth rings within fossil woods described here and reported previously from North China suggests a humid climate with minimal precipitation variations during the Late Pennsylvanian-early Permian.