Trabecular Morphology Research Articles

Genetic and phenotypic architecture of biventricular trabeculation

Abstract Introduction Cardiac trabeculae form a network of muscular strands that line the inner surfaces of the heart, and their development involves molecular pathways that regulate structural complexity. Excessive or hypertrabeculation occurs as part of normal variation in apparently healthy individuals, as an adaptation to altered loading conditions, and is observed in patients with cardiomyopathies (CMs) and heart failure (HF). Purpose In adults, trabeculation is not a prognostic factor independent of the underlying myocardial disease but may play a role in the natural history of ventricular remodelling. We sought to (i) understand the genetic and non-genetic determinants of trabeculation, (ii) understand its role in the causality of disease, and (iii) evaluate trabeculation as a biomarker for diagnosis and stratification. Methods We report genes with a burden of rare variants and novel common variant associations across the allele frequency spectrum for biventricular trabecular morphology in 47,803 participants of the UK Biobank using fractal dimension analysis of cardiac imaging (Figure 1). We assessed environmental modifiers of trabecular morphology, correlation with cardiac traits, phenome-wide association studies, and the relationship with the progression of CMs and HF. Results We identified a burden of trabeculation-associated rare variants in genes that regulate myocardial contractility and cardiac development and GWAS identified novel loci near genes implicated in CMs, conduction traits, and signalling pathways that define the early development of trabeculation. For example, we identified 56 genes with a burden of rare variants and 68 novel loci from GWAS (e.g., CASQ2, CACNA1C, MYBPC3, MYH7, NKX2-5, NOTCH1, TBX20) for the left ventricle. The strongest imaging relationships with trabeculation were with measures of volume and strain. Modifiers of trabeculation included African ancestry, alcohol intake, and physical activity. Carriers of CM-associated pathogenic variants had increased trabeculation. Of participants with CM reported after imaging, 25% had hypertrabeculation on imaging and hypertrabeculation was a risk factor for a subsequent diagnosis of HF (HR=1.3), mitral valve disorders (HR=1.4), bundle branch block (HR=1.2). Comparisons of biventricular trabeculation showed similarities in trabeculation across the ventricles in CM. Reduced right ventricular trabeculation and end-diastolic volume associated with Type-2 diabetes. Conclusions These data provide new insights into the mechanisms that regulate structural complexity in the heart. Changes in trabeculation may occur early in the pathogenesis of heart disease, can be modified by genes regulating pathways outside the sarcomere, and causality depends on the underlying cardiomyopathic substrate. Trabeculation progresses with cardiovascular disease, is a useful marker of remodelling, and identifies novel genetic modifiers of ventricular complexity.Figure 1

Differential effects of alendronate on chondrocytes, cartilage matrix and subchondral bone structure in surgically induced osteoarthritis in mice

Bisphosphonates (BP) are considered a treatment option for osteoarthritis (OA) due to reduction of OA-induced microtrauma in the bone marrow, stabilization of subchondral bone (SB) layer and pain reduction. The effects of high-dose alendronate (ALN) treatment on SB and articular cartilage after destabilization of the medial meniscus (DMM) or Sham surgery of male C57Bl/6J mice were analyzed. We performed serum analysis; histology and immunohistochemistry to assess the severity of OA and a possible pain symptomatology. Subsequently, the ratio of bone volume to total volume (BV/TV), epiphyseal trabecular morphology and the bone mineral density (BMD) was analyzed by nanoCT. Serum analysis revealed a reduction of ADAMTS5 level. The histological evaluation displayed no protective effect of ALN-treatment on cartilage erosion. NanoCT-analysis of the medial epiphysis revealed an increase of BV/TV in ALN-treated mice. Only the DMM group had significantly higher SB volume accompanied by decreased subchondral bone surface. Furthermore Nano-CT analysis revealed an increase in trabecular density and number, a decreased BMD and reduced osteophyte formation in the ALN mice. ALN treatment affected bone micro-architecture by reducing osteophytosis with simultaneous increasing subchondral bone plate thickness, trabecular thickness and BMD. Accordingly, ALN cannot be considered as a potential treatment strategy in general, however in a subgroup of patients with high bone turnover in an early-stage of OA, ALN might be an option when applied during a restricted time frame.

7943 In Obese C57Bl6 Male Mice, Weight Loss due to Caloric Restriction Reduced Bone Morphology but Improved Components of Systemic Metabolism

Abstract Disclosure: C. Chlebek: None. C. McAndrews: None. S.N. Costa: None. C.J. Rosen: None. Obesity and calorie restriction individually alter systemic cellular metabolism and affect musculoskeletal tissue health. Obesity reduces trabecular and cortical bone quality. Clinically, obese patients are advised to lose weight, despite the negative effects of calorie restriction on bone in nonobese preclinical models. Little is known about bone quality following weight loss in obese preclinical models. We hypothesized that in obese models, caloric restriction would further worsen bone quality. To induce obesity, male C57Bl6 mice (8 weeks old) received 60% high fat diet for 12 weeks (high fat feeding phase). Following obesity induction, the HFD-CR group was acclimated to control low fat diet for 2 wks and then underwent 30% caloric restriction for 8 wks (caloric restriction feeding phase). The HFD group received 60% kcal high fat diet from ages 8 to 30 wks. LFD mice received control low fat 10% kcal diet for the study duration. Mice were euthanized at 30 wks of age. Body weight, body composition, and bone mineral density were recorded at baseline and at the end of each diet. Glucose and insulin tolerance were recorded at the end of the high fat and caloric restriction feeding phases. At euthanasia, cortical and trabecular bone morphology (µCT) were assessed.Adverse metabolic parameters worsened with high fat feeding but improved by caloric restriction. Compared to LFD animals, HFD and HFD-CR mice gained body weight, fat mass, and lean mass during the high fat feeding phase. After the caloric restriction feeding phase, body weight, fat mass, and lean mass were reduced in HFD-CR compared to both HFD and LFD controls (p < 0.0001). After 12 weeks of high fat feeding, glucose and insulin tolerance were reduced in HFD and HFD-CR mice compared to LFD (p < 0.0001). Caloric restriction improved both glucose and insulin tolerance in HFD-CR mice compared to both HFD and LFD animals (p < 0.0001). Caloric restriction improved areal bone mineral density, but at euthanasia, HFD-CR mice had worse bone morphology compared to LFD or HFD animals. Although areal bone mineral density (aBMD) was reduced by the high fat feeding phase, HFD-CR and LFD aBMD was not different at the end of the study (p < 0.0001). At euthanasia, HFD-CR mice had reduced cortical area and cortical thickness (p < 0.05). Marrow area and moment of inertia were not different between diets. Compared to LFD, both HFD and HFD-CR mice had reduced tibial bone volume fraction (p < 0.05). HFD-CR animals had smaller trabecular thickness (p < 0.05) and greater trabecular number (p < 0.01) compared to HFD mice. Despite improvements in components of systemic metabolism, caloric restriction in obese preclinical models reduced bone morphology in both trabecular and cortical compartments. This work will improve our understanding of the musculoskeletal system following caloric restriction in obese models and will aid in nutritional counseling for obese patients. Presentation: 6/1/2024

Polyacrylonitrile‒Chitosan IPN composite scaffolds that closely mimic the human trabecular bone structure for tissue engineering

Successful bone tissue engineering involves managing several important parameters, such as the design of intercommunicating porous structures, pore sizes, and the material and mechanical suitability of the material. In our work, we focused on the preparation of a synthetic scaffold that morphologically mimics the structure of human trabecular bone. The scaffolds were fabricated through the thermal modification (TM) of polyacrylonitrile. The scaffold strength was supported by a crosslinked chitosan supporting network. The prepared scaffold has imprinted pores of the appropriate size to facilitate the ingrowth and proliferation of human osteoblasts throughout the entire pore volume created by a primary porogen, sodium chloride. The resulting material has a dual porous morphological structure, in which adjustable larger pores support cellular ingrowth into the scaffold, whereas smaller pores, created using succinonitrile (SCN) as a secondary porogen, increase the diffusion of oxygen and nutrients to developing cells. The mechanical properties of the scaffold were promoted by the use of a secondary interpenetrating network (IPN) based on chitosan. The incorporation of secondary IPNs led to a significant improvement in the mechanical characteristics of the scaffold. Two crosslinking agents were used: the widely utilized glutaraldehyde (GA) and its green, nontoxic alternative, genipin (GEN).The current study introduces a synthetic scaffold that effectively mimics the structure of human trabecular bone, providing a conducive environment for osteoblast proliferation and ingrowth. We incorporated a dual porous morphology and a secondary IPN based on chitosan and found that the scaffold exhibited improved mechanical properties and nutrient diffusion capabilities. This research highlights the potential of these scaffolds for major advancements in bone tissue engineering, demonstrating their noncytotoxic nature and ability to support the adhesion and proliferation of the human osteosarcoma cell line SAOS-2. The described scaffold preparation technique may offer distinct advantages over current high-end methods such as 3D printing. The primary benefit lies in its very simple instrumentation, which enables the creation of a complex trabecular bone morphology with both macro- and microporosity in the bulk, which is still challenging for common 3D printers. Additionally, IPN with chitosan can be postmodified, substantially expanding the potential applications of these scaffolds.

Effectiveness of desertliving cistanche in managing hyperlipidemic osteoporosis in ovariectomized rats through the PI3K/AKT signaling pathway

BackgroundTo aim of this study is to assess the mechanism through which Desertliving Cistanche modulates the PI3K/AKT signaling pathway in the treatment of hyperlipidemic osteoporosis in ovariectomized rats.MethodsWe randomly assigned specific-pathogen-free (SPF) rats into five groups (n = 10 per group). The normal control group received a standard diet, while the model group, atorvastatin group, diethylstilbestrol group, and treatment group were fed a high-fat diet. Four weeks later, bilateral ovariectomies were conducted, followed by drug interventions. After six weeks of treatment, relevant indicators were compared and analyzed.ResultsCompared to the normal control group, rats in the model group exhibited blurred trabecular morphology, disorganized osteocytes, significantly elevated levels of bone-specific alkaline phosphatase (BALP), bone Gla-protein (BGP), total cholesterol (TC), tumor necrosis factor-α (TNF-α), and receptor activator of NF-κB ligand (RANKL). Also, the model group revealed significantly reduced levels of ultimate load, fracture load, estradiol (E2), bone mineral density (BMD), osteoprotegerin (OPG), and phosphoinositide 3-kinase (PI3K) and protein kinase B (Akt) in femoral tissue. The atorvastatin group presented with higher TC and TNF-α levels compared to the normal control group. Conversely, the treatment group demonstrated enhanced trabecular morphology, denser structure, smaller bone marrow cavities, and reduced BALP, BGP, TC, TNF-α, and RANKL levels. Furthermore, the treatment group exhibited higher levels of E2, BMD, OPG, and PI3K and Akt in bone tissue compared to the model group. The treatment group also had lower TC and TNF-α levels than the atorvastatin group. Biomechanical analysis indicated that after administration of Desertliving Cistanche, the treatment group had reduced body mass, increased ultimate and fracture load of the femur, denser bone structure, smaller bone marrow cavities, and altered periosteal arrangement compared to the model group.ConclusionOur study revealed that Desertliving Cistanche demonstrated significant efficacy in preventing and treating postmenopausal hyperlipidemic osteoporosis in rats.

Combined application of mesenchymal stem cells and different glucocorticoid dosing alleviates osteoporosis in SLE murine models.

Bone mesenchymal stem cells (BMSCs) have been tentatively applied in the treatment of glucocorticoid-induced osteoporosis (GIOP) and systemic lupus erythematosus (SLE). However, the effects of BMSCs on osteoporosis within the context of glucocorticoid (GC) application in SLE remain unclear. Our aim was to explore the roles of BMSCs and different doses of GC interventions on osteoporosis in SLE murine models. MRL/MpJ-Faslpr mice were divided into eight groups with BMSC treatment and different dose of GC intervention. Three-dimensional imaging analysis and hematoxylin and eosin (H&E) staining were performed to observe morphological changes. The concentrations of osteoprotegerin (OPG) and receptor activator of nuclear factor κB ligand (RANKL) in serum were measured by enzyme-linked immunosorbent assay (ELISA). The subpopulation of B cells and T cells in bone marrows and spleens were analyzed by flow cytometry. Serum cytokines and chemokines were assessed using Luminex magnetic bead technology. BMSCs ameliorated osteoporosis in murine SLE models by enhancing bone mass, improving bone structure, and promoting bone formation through increased bone mineral content and optimization of trabecular morphology. BMSC and GC treatments reduced the number of B cells in bone marrows, but the effect was not significant in spleens. BMSCs significantly promoted the expression of IL-10 while reducing IL-18. Moreover, BMSCs exert immunomodulatory effects by reducing Th17 expression and rectifying the Th17/Treg imbalance. BMSCs effectively alleviate osteoporosis induced by SLE itself, as well as osteoporosis resulting from SLE combined with various doses of GC therapy. The therapeutic effects of BMSCs appear to be mediated by their influence on bone marrow B cells, T cell subsets, and associated cytokines. High-dose GC treatment exerts a potent anti-inflammatory effect but may hinder the immunotherapeutic potential of BMSCs. Our research may offer valuable guidance to clinicians regarding the use of BMSC treatment in SLE and provide insights into the judicious use of GCs in clinical practice.

Fractal Analysis of Trabecular Alveolar Bone with Intrabony and Furcation Defects Using Periapical Dental Radiographs

Objective: Fractal analysis (FA) is a non-invasive method that quantitatively measures complex patterned geometric structures present throughout the image. Trabecular morphology of the alveolar bone and the changes occurring in the trabeculae in case of periodontitis can be detected with this method. To examine the periodontal defects in human skull bones using the FA, to compare them with healthy alveolar bone regions. Methods: Furcation and intrabony defects were artificially created in the mandible alveolar bones (n:24). Periapical X-ray images of alveolar bone regions containing teeth with defects were taken using the parallel technique. Fractal analysis was performed by box-counting method using Image J software on images from areas containing healthy and defective trabecular bone. Results: No statistically significant difference was found between the fractal values of healthy tissue and bifurcation defetcs and between the healthy tissue and intrabony defects (p>0.05). Conclusion: Many factors may have affected the outcomes; patient selection, imaging methods, sample size, Region of interest (ROI) selection-location and size, individual and anatomical variations. These variables need to be standardized as much as possible and the limitations of the method need to be improved.

Deep Learning-Based Identification of Intraocular Pressure-Associated Genes Influencing Trabecular Meshwork Cell Morphology

Genome-wide association studies have recently uncovered many loci associated with variation in intraocular pressure (IOP). Artificial intelligence (AI) can be used to interrogate the effect of specific genetic knockouts on the morphology of trabecular meshwork cells (TMCs) and thus, IOP regulation. Experimental study. Primary TMCs collected from human donors. Sixty-two genes at 55 loci associated with IOP variation were knocked out in primary TMC lines. All cells underwent high-throughput microscopy imaging after being stained with a 5-channel fluorescent cell staining protocol. A convolutional neural network was trained to distinguish between gene knockout and normal control cell images. The area under the receiver operator curve (AUC) metric was used to quantify morphological variation in gene knockouts to identify potential pathological perturbations. Degree of morphological variation as measured by deep learning algorithm accuracy of differentiation from normal controls. Cells where LTBP2 or BCAS3 had been perturbed demonstrated the greatest morphological variation from normal TMCs (AUC 0.851, standard deviation [SD] 0.030; and AUC 0.845, SD 0.020, respectively). Of 7 multigene loci, 5 had statistically significant differences in AUC (P<0.05) between genes, allowing for pathological gene prioritization. The mitochondrial channel most frequently showed the greatest degree of morphological variation (33.9% of cell lines). We demonstrate a robust method for functionally interrogating genome-wide association signals using high-throughput microscopy and AI. Genetic variations inducing marked morphological variation can be readily identified, allowing for the gene-based dissection of loci associated with complex traits. Proprietary or commercial disclosure may be found in the Footnotes and Disclosures at the end of this article.

Trabecular architecture of the distal femur in extant hominids.

Extant great apes are characterized by a wide range of locomotor, postural and manipulative behaviours that each require the limbs to be used in different ways. In addition to external bone morphology, comparative investigation of trabecular bone, which (re-)models to reflect loads incurred during life, can provide novel insights into bone functional adaptation. Here, we use canonical holistic morphometric analysis (cHMA) to analyse the trabecular morphology in the distal femoral epiphysis of Homo sapiens (n = 26), Gorilla gorilla (n = 14), Pan troglodytes (n = 15) and Pongo sp. (n = 9). We test two predictions: (1) that differing locomotor behaviours will be reflected in differing trabecular architecture of the distal femur across Homo, Pan, Gorilla and Pongo; (2) that trabecular architecture will significantly differ between male and female Gorilla due to their different levels of arboreality but not between male and female Pan or Homo based on previous studies of locomotor behaviours. Results indicate that trabecular architecture differs among extant great apes based on their locomotor repertoires. The relative bone volume and degree of anisotropy patterns found reflect habitual use of extended knee postures during bipedalism in Homo, and habitual use of flexed knee posture during terrestrial and arboreal locomotion in Pan and Gorilla. Trabecular architecture in Pongo is consistent with a highly mobile knee joint that may vary in posture from extension to full flexion. Within Gorilla, trabecular architecture suggests a different loading of knee in extension/flexion between females and males, but no sex differences were found in Pan or Homo, supporting our predictions. Inter- and intra-specific variation in trabecular architecture of distal femur provides a comparative context to interpret knee postures and, in turn, locomotor behaviours in fossil hominins.

Comparing lateral plantar process trabecular structure to other regions of the human calcaneus.

Investigating skeletal adaptations to bipedalism informs our understanding of form-function relationships. The calcaneus is an important skeletal element to study because it is a weight-bearing bone with a critical locomotor role. Although other calcaneal regions have been well studied, we lack a clear understanding of the functional role of the lateral plantar process (LPP). The LPP is a bony protuberance on the inferolateral portion of the calcaneus thought to aid the tuberosity in transmission of ground reaction forces during heel-strike. Here, we analyze LPP internal trabecular structure relative to other calcaneal regions to investigate its potential functional affinities. Human calcanei (n = 20) were micro-CT scanned, and weighted spherical harmonic analysis outputs were used to position 251 volumes of interest (VOI) within each bone. Trabecular thickness (Tb.Th), spacing (Tb.Sp), degree of anisotropy (DA), and bone volume fraction (BV/TV) were calculated for each VOI. Similarities in BV/TV and DA (p = 0.2741) between the LPP and inferior tuberosity support suggestions that the LPP is a weight-bearing structure that may transmit forces in a similar direction. The LPP significantly differs from the inferior tuberosity in Tb.Th and Tb.Sp (p < 0.05). Relatively thinner, more closely spaced trabeculae in the LPP may serve to increase internal surface area to compensate for its relatively small size compared to the tuberosity. Significant differences in all parameters between LPP and joint articular surfaces indicate that trabecular morphology is differently adapted for the transmission of forces associated with body mass through joints.

Trabeculations of the porcine and human cardiac ventricles are different in number but similar in total volume.

An intricate meshwork of trabeculations lines the luminal side of cardiac ventricles. Compaction, a developmental process, is thought to reduce trabeculations by adding them to the neighboring compact wall which is then enlarged. When pig, a plausible cardiac donor for xenotransplantation, is compared to human, the ventricular walls appear to have fewer trabeculations. We hypothesized the trabecular volume is proportionally smaller in pig than in human. Macroscopically, we observed in 16 pig hearts that the ventricular walls harbor few but large trabeculations. Close inspection revealed a high number of tiny trabeculations, a few hundred, within the recesses of the large trabeculations. While tiny, these were still larger than embryonic trabeculations and even when considering their number, the total tally of trabeculations in pig was much fewer than in human. Volumetrics based on high-resolution MRI of additional six pig hearts compared to six human hearts, revealed the left ventricles were not significantly differently trabeculated (21.5 versus 22.8%, respectively), and the porcine right ventricles were only slightly less trabeculated (42.1 vs 49.3%, respectively). We then analyzed volumetrically 10 pig embryonic hearts from gestational day 14-35. The trabecular and compact layer always grew, as did the intertrabecular recesses, in contrast to what compaction predicts. The proportions of the trabecular and compact layers changed substantially, nonetheless, due to differences in their growth rate rather than compaction. In conclusion, processes that affect the trabecular morphology do not necessarily affect the proportion of trabecular-to-compact myocardium and they are then distinct from compaction.

Prognostic value of right ventricular trabecular complexity in patients with arrhythmogenic cardiomyopathy.

The present study aimed to investigate the incremental prognostic value of the right ventricular fractal dimension (FD), a novel marker of myocardial trabecular complexity by cardiac magnetic resonance (CMR) in patients with arrhythmogenic cardiomyopathy (ACM). Consecutive patients with ACM undergoing CMR were followed up for major cardiac events, including sudden cardiac death, aborted cardiac arrest, and appropriate implantable cardioverter defibrillator intervention. Prognosis prediction was compared by Cox regression analysis. We established a multivariable model supplemented with RV FD and evaluated its discrimination by Harrell's C-statistic. We compared the category-free, continuous net reclassification improvement (cNRI) and integrated discrimination index (IDI) before and after the addition of FD. A total of 105 patients were prospectively included from three centers and followed up for a median of 60 (48, 66) months; experienced 36 major cardiac events were recorded. Trabecular FD displayed a strong unadjusted association with major cardiac events (p < 0.05). In the multivariable Cox regression analysis, RV maximal apical FD maintained an independent association with major cardiac events (hazard ratio, 1.31 (1.11-1.55), p < 0.002). The Hosmer-Lemeshow goodness of fit test displayed good fit (X2 = 0.68, p = 0.99). Diagnostic performance was significantly improved after the addition of RV maximal apical FD to the multivariable baseline model, and the continuous net reclassification improvement increased 21% (p = 0.001), and the integrated discrimination index improved 16% (p = 0.045). In patients with ACM, CMR-assessed myocardial trabecular complexity was independently correlated with adverse cardiovascular events and provided incremental prognostic value. The application of FD values for assessing RV myocardial trabeculae may become an accessible and promising parameter in monitoring and early diagnosis of risk factors for adverse cardiovascular events in patients with ACM. • Ventricular trabecular morphology, a novel quantitative marker by CMR, has been explored for the first time to determine the severity of ACM. • Patients with higher maximal apical fractal dimension of RV displayed significantly higher cumulative incidence of major cardiac events. • RV maximal apical FD was independently associated with major cardiac events and provided incremental prognostic value in patients with ACM.

Differences in Trabecular bone morphology between patients with non progressive and progressive osteoporotic vertebral compression fractures

Differences in Trabecular bone morphology between patients with non progressive and progressive osteoporotic vertebral compression fractures

Trabecular bone morphology in big cats reflects the complex diversity of limb use but not home range size or daily travel distance.

A relationship exists between mechanical loading and bone morphology. Although studies show a relationship between trabecular bone morphology and locomotor strategy in mammals, none of them have studied trabecular bone morphology in felid species occupying disparate and overlapping habitats. We investigate trabecular bone volume fraction (BVF) in the femoral and humeral heads, and distal tibia of four felid species (mountain lions, jaguars, cheetahs, and leopards) to identify whether there is a relationship between BVF and locomotor behavior. This study's goals are to identify whether felid species with high daily travel distance or large home range size have greater BVF compared with those with small daily travel distance or home range size, and whether BVF is correlated among the three elements of the fore and hindlimb studied. We quantified BVF in micro- and peripheral computed tomography images and found no significant differences across species in the femoral and humeral head (p > 0.05). However, in the distal tibia, results showed that leopards, mountain lions, and cheetahs have significantly greater (p < 0.05) BVF than jaguars. Despite differences in home range size and daily travel distance, the proximal elements did not reflect differences in BVF; however, the distal-most element did, suggesting decreased loading among jaguars. These findings suggest that the observed pattern of trabecular bone morphology is potentially due to the diversity in locomotor strategy of the forelimb. Additionally, these results imply that neither home range size nor daily travel distance are clear indicators of activity levels. A cautious approach is warranted in studying how loading influences trabecular morphology.

The roles of phylogeny, body size and substrate use in trabecular bone variation among Philippine ‘earthworm mice’ (Rodentia: Chrotomyini)

AbstractTrabecular bone is modelled throughout an animal’s life in response to its mechanical environment, but like other skeletal anatomy, it is also subject to evolutionary influences. Yet the relative strengths of factors that affect trabecular bone architecture are little studied. We investigated these influences across the Philippine endemic murine rodent clade Chrotomyini. These mammals have robustly established phylogenetic relationships, exhibit a range of well-documented substrate-use types, and have a body size range spanning several hundred grammes, making them ideal for a tractable study of extrinsic and intrinsic influences on trabecular bone morphology. We found slight differences in vertebral trabecular bone among different substrate-use categories, with more divergent characteristics in more ecologically specialized taxa. This suggests that the mechanical environment must be relatively extreme to affect trabecular bone morphology in small mammals. We also recovered allometric patterns that imply that selective pressures on bone may differ between small and large mammals. Finally, we found high intrataxonomic variation in trabecular bone morphology, but it is not clearly related to any variable we measured, and may represent a normal degree of variation in these animals rather than a functional trait. Future studies should address how this plasticity affects biomechanical properties and performance of the skeleton.

Evaluation of mandibular cortical and trabecular radiomorphometry in familial Mediterranean fever patients

The objective of this retrospective study was to evaluate the mandibular cortical and trabecular morphology and microarchitecture of patients with familial Mediterranean fever (FMF) and compare them to those of healthy individuals by examining radiomorphometric indices on panoramic radiographs. We examined a group of 56 FMF patients aged 5 to 71 years and an age- and sex-matched control group of individuals with no systemic diseases. We classified the FMF and control groups according to age and sex and the FMF group according to colchicine use. We evaluated the quantitative radiomorphometic indices of gonial index, antegonial index, molar cortical thickness, mental index, panoramic mandibular index, and lacunarity, and the qualitative mandibular cortical index on all panoramic radiographs and performed between and within group analysis. Mean gonial index, antegonial index, and molar cortical thickness values of the FMF group were significantly smaller than those of the control group. Significantly fewer patients in the FMF group were classified as mandibular cortical index type 1 compared to the control group. There were no significant differences in quantitative index values according to colchicine use in the FMF group or regarding the categorical parameters of age, sex, and mandibular cortical index classification. Radiomorphometric values of the mandibular basal cortex posterior to the mental foramen differ significantly in FMF patients compared to healthy counterparts. Dentists should note mandibular morphologic changes indicative of low bone density when examining panoramic images of patients with this disease.

Influence of growth plate morphology on bone trabecular groups, a framework computational approach.

The morpholog of the growth plate undergoes various transformations during each stage of development, affecting its shape, width, density, and other characteristics. This significantly impacts the distribution of stress in the epiphysis of long bones. To the best of our knowledge, this study represents the first attempt to examine the relationship between growth plate morphology and trabecular bone patterns. Our analysis was conducted using a finite element model and we analyzed two medical cases: trabecular patterns in the femoral epiphysis and the calcaneus bone. Our findings revealed a correlation between the formation of main trabecular groups and growth plate morphology. We investigated how an increased density in high-shear stress zones, which are typically located at the periphery of the growth plate, may occur to prevent failure by shear. This is evident in cases such as slipped capital femoral epiphysis or sever's disease, different simulations align with the clinical data available in the literature from a qualitative and quantitative point of view. Our results suggest that further research should focus on understanding the impact of growth plate morphology on bone remodeling and exploring potential preventive measures for different bone disorders.

Treatment of comminuted metaphyseal distal femoral fractures with a micromotion-balancing osteosynthesis: an animal study

BackgroundLocking plates are commonly used in the treatment of comminuted metaphyseal distal femoral fractures. However, locking plates form a strong structure and promote asymmetrical callus formation, which is not conducive for rapid fracture healing and may increase fracture risk. To overcome this, we designed a micromotion-balancing fixation system based on locking plates.MethodsSix healthy pigs (Bama miniature pigs) were used to establish a model of bilateral comminuted distal femoral fracture (AO/ASIF: 33-C2). Standard drilling was performed on one of each pig’s hind limbs (control group), whereas eccentric drilling was performed on the other hind limb (experimental group). Both femurs were fixed with a 3-hole locking compression plate using 5-mm-diameter screws. At 12 postoperative weeks, all pigs were euthanized and the femurs with compression plates were radiographically examined. The level of fracture healing and loosening/internal fixation failure were recorded. Bone mineral density, number of trabeculae, trabecular morphology, and calcification precipitations were assessed.ResultsAll pigs survived, and the fractures healed. No complications related to fracture healing, such as infection and internal fixation failure, were noted. The bone mineral density of the near and far cortical calli, number of the near and far cortical callus trabeculae, and difference in bone mineral density between the near and far cortical calli in the experimental group were significantly higher than those in the control group (p < 0.01). However, the difference in the number of trabeculae between the near and far cortical calli was significantly lower in the experimental group than in the control group (p < 0.01).ConclusionThis newly designed system provides stable fixation for comminuted distal femoral fracture, increases the overall strain at the fracture site, and balances the strains at the near and far cortices to achieve uniform callus growth and fracture healing.

AN EXPERIMENTAL INVESTIGATION OF THE MICROARCHITECTURE AND FRACTURE MECHANICS OF FEMURS OF ZUCKER DIABETIC FATTY (ZDF) RATS USING A SIDEWAYS FALL TEST

This study aims to assess the fracture mechanics of type-2 diabetic (T2D) femoral bone using innovative site-specific tests, whilst also examining the cortical and trabecular bone microarchitecture from various regions using micro-computed tomography (CT) of the femur as the disease progresses.Male [Zucker Diabetic Fatty (ZDF: fa/fa) (T2D) and Zucker Lean (ZL: fa/+) (Control)] rats were euthanized at 12-weeks of age, thereafter, right and left femora were dissected (Right femora: n = 6, per age, per condition; Left femora: n=8-9, per age, per condition). Right femurs were notched in the posterior of the midshaft. Micro-CT was used to scan the proximal femur, notched and unnotched femoral midshaft (cortical) of the right femur and the distal metaphysis (trabecular) of the left femur to investigate microarchitecture and composition. Right femurs were fracture toughness tested to measure the stress intensity factor (Kic) followed by a sideways fall test using a custom-made rig to investigate femoral neck mechanical properties.There was no difference in trabecular and cortical tissue material density (TMD) between T2D and control rats. Cortical thickness was unchanged, but trabeculae were thinner (p&lt;0.01) in T2D rats versus controls. However, T2D rats had a greater number of trabeculae (p&lt;0.05) although trabecular spacing was not different to controls. T2D rats had a higher connectivity distribution (p&lt;0.05) and degree of anisotropy (p&lt;0.05) in comparison to controls. There was no difference in the mechanical properties between strains.At 12-weeks of age, rats are experiencing early-stage T2Ds and the disease impact is currently not very clear. Structural and material properties are unchanged between strains, but the trabecular morphology shows that T2D rats have more trabecular struts present in order to account for the thinner trabeculae.

Ocular manifestations of central insulin resistance.

Central insulin resistance, the diminished cellular sensitivity to insulin in the brain, has been implicated in diabetes mellitus, Alzheimer's disease and other neurological disorders. However, whether and how central insulin resistance plays a role in the eye remains unclear. Here, we performed intracerebroventricular injection of S961, a potent and specific blocker of insulin receptor in adult Wistar rats to test if central insulin resistance leads to pathological changes in ocular structures. 80 mg of S961 was stereotaxically injected into the lateral ventricle of the experimental group twice at 7 days apart, whereas buffer solution was injected to the sham control group. Blood samples, intraocular pressure, trabecular meshwork morphology, ciliary body markers, retinal and optic nerve integrity, and whole genome expression patterns were then evaluated. While neither blood glucose nor serum insulin level was significantly altered in the experimental or control group, we found that injection of S961 but not buffer solution significantly increased intraocular pressure at 14 and 24 days after first injection, along with reduced porosity and aquaporin 4 expression in the trabecular meshwork, and increased tumor necrosis factor α and aquaporin 4 expression in the ciliary body. In the retina, cell density and insulin receptor expression decreased in the retinal ganglion cell layer upon S961 injection. Fundus photography revealed peripapillary atrophy with vascular dysregulation in the experimental group. These retinal changes were accompanied by upregulation of pro-inflammatory and pro-apoptotic genes, downregulation of anti-inflammatory, anti-apoptotic, and neurotrophic genes, as well as dysregulation of genes involved in insulin signaling. Optic nerve histology indicated microglial activation and changes in the expression of glial fibrillary acidic protein, tumor necrosis factor α, and aquaporin 4. Molecular pathway architecture of the retina revealed the three most significant pathways involved being inflammation/cell stress, insulin signaling, and extracellular matrix regulation relevant to neurodegeneration. There was also a multimodal crosstalk between insulin signaling derangement and inflammation-related genes. Taken together, our results indicate that blocking insulin receptor signaling in the central nervous system can lead to trabecular meshwork and ciliary body dysfunction, intraocular pressure elevation, as well as inflammation, glial activation, and apoptosis in the retina and optic nerve. Given that central insulin resistance may lead to neurodegenerative phenotype in the visual system, targeting insulin signaling may hold promise for vision disorders involving the retina and optic nerve.