TPH-contaminated Soil Research Articles

Integration of physiology, genomics and microbiomics analyses reveal the biodegradation mechanism of petroleum hydrocarbons by Medicago sativa L. and growth-promoting bacterium Rhodococcus erythropolis KB1

Despite the effectiveness of microbial-phytoremediation for remediating total petroleum hydrocarbons (TPH)-contaminated soil, the underlying mechanisms remain elusive. This study investigated the whole-genome and biological activity of Rhodococcus erythropolis KB1, revealing its plant growth promotion (PGP), TPH degradation, and stress resistance capabilities. Phytoremediation (using alfalfa) and plant-microbial remediation (using alfalfa and KB1) were employed to degrade TPH. The highest TPH degradation rate, reaching 95%, was observed with plant-microbial remediation. This is attributed to KB1′s ability to promote alfalfa growth, induce the release of signaling molecules to activate plant antioxidant enzymes, actively recruit TPH-degrading bacteria (e.g., Sphingomonas, Pseudomonas, C1-B045), and increase soil nitrogen and phosphorus levels, thereby accelerating TPH degradation by both plants and microorganisms. This study demonstrates that R. erythropolis KB1 holds great potential for enhancing the remediation of TPH-contaminated soil through its multifaceted mechanisms, particularly in plant-microbial remediation strategies, providing valuable theoretical support for the application of this technology.

New strategy to optimize in-situ fenton oxidation for TPH contaminated soil remediation via artificial neural network approach

In-situ remediation of total petroleum hydrocarbon (TPH) contaminated soils via Fenton oxidation is a promising approach. However, determining the proper injection amount of H2O2 and Fe source over the Fenton reaction in the complex geological conditions for in-situ TPH soil remediation remains a daunting challenge. Herein, we introduced a practical and novel approach using soft computational models, a multilayer perception artificial neural network (MPLNN), for predicting the TPH removal performance. In this study, we conducted 48 sets of TPH removal experiments using Fenton oxidation to determine the TPH removal performance of a wide range of different ground conditions and generated 336 data points. As a result, a negative Pearson correlation coefficient was obtained in the Fe injection mass and the natural presence of Fe mineral in the soil, indicating that the excess of Fe could significantly retarded the TPH removal performance in the Fenton reaction. In addition, the MPLNN model with 6-6-1 training using Scaled conjugate gradient backpropagation (SCG) with tangent sigmoid as the transfer function demonstrated a high accuracy for TPH removal prediction with the correlation determination of 0.974 and mean square error value of 0.0259. The optimized MPLNN model achieved less than 20% error for predicting TPH removal performance in actual TPH-contaminated soil via Fenton oxidation. Hence, the proposed MPLNN can be useful in improving the Fenton oxidation of TPH removal performance in-situ soil remediation.

Biochar Enhances Rice Growth and Mitigates Total Petroleum Hydrocarbon Contamination in Soil: A Sustainable Approach for Crop Production

ABSTRACT Biochar is a soil amendment made from organic waste pyrolysis that has the potential to enhance crop growth and reduce soil contamination. A recent study examined the effects of biochar application on rice plant growth, yield, biomass, and total petroleum hydrocarbon (TPH) contamination in soil. The study included four treatments: control, biochar (2.0% and 4.0% addition), TPH (4.0%, 6.0%, and 8.0%), and biochar+TPH. Results showed that biochar application was effective in mitigating the negative effects of TPH contamination on soil-physiochemical properties, increasing soil pH, organic matter, and available nutrients. Additionally, biochar application significantly increased rice plant height compared to the control and mitigated the negative impact of TPH on rice plant height in TPH-contaminated soil. Biochar application at 4.0% and 6.0% resulted in higher grain yield and biomass than the control group under all TPH contamination levels, with 6.0% being the most effective. Overall, the study highlights the potential of biochar as a sustainable approach for crop production in contaminated areas. However, further research is required to understand the underlying mechanisms, sustainability, and long-term effects of biochar application in agricultural systems.

Water conditions and arbuscular mycorrhizal symbiosis affect the phytoremediation of petroleum-contaminated soil by Phragmites australis

Phytoremediation of petroleum-contaminated soils using the synergistic functions of plants and rhizosphere microorganisms is a promising technology. However, successfully applying this approach presents challenges under certain conditions (submerged environments). This study analyzed the potential role of Phragmites australis in symbiosis with arbuscular mycorrhizal (AM) fungi during petroleum remediation at two water levels. AM inoculation promoted P. australis aboveground growth under non-flooded conditions, whereas flooding significantly increased P. australis biomass. The highest total petroleum hydrocarbon (TPH) degradation efficiency was observed in non-flooded soils, whereas submergence severely inhibited TPHs dissipation. Plants with AM inoculation treatments substantially enhanced the removal of TPHs under flooded conditions. TPH removal was positively correlated with dehydrogenase activity but negatively correlated with easily extracted glomalin-related soil proteins. Moreover, different petroleum-hydrocarbon-decaying candidates contributed to TPH removal in these two cultured soils. These findings provide valuable information for the remediation of future TPH-contaminated soils, especially applied in intermittently submerged environments.

Application of novel nanobubble-contained electrolyzed catalytic water to cleanup petroleum-hydrocarbon contaminated soils and groundwater: A pilot-scale and performance evaluation study

Soil and groundwater contamination caused by petroleum hydrocarbons is a severe environmental problem. In this study, a novel electrolyzed catalytic system (ECS) was developed to produce nanobubble-contained electrolyzed catalytic (NEC) water for the remediation of petroleum-hydrocarbon-contaminated soils and groundwater. The developed ECS applied high voltage (220 V) with direct current, and titanium electrodes coated with iridium dioxide were used in the system. The developed ECS prototype contained 21 electrode pairs (with a current density of 20 mA/cm2), which were connected in series to significantly enhance the hydroxyl radical production rate. Iron-copper hybrid oxide catalysts were laid between each electrode pair to improve the radical generation efficiency. The electron paramagnetic resonance (EPR) and Rhodamine B (RhB) methods were applied for the generated radical species and concentration determination. During the operation of the ECS, high concentrations of nanobubbles (nanobubble density = 3.7 × 109 particles/mL) were produced due to the occurrence of the cavitation mechanism. Because of the negative zeta potential and nano-scale characteristics of nanobubbles (mean diameter = 28 nm), the repelling force would prevent the occurrence of bubble aggregations and extend their lifetime in NEC water. The radicals produced after the bursting of the nanobubbles would be beneficial for the increase of the radical concentration and subsequent petroleum hydrocarbon oxidation. The highly oxidized NEC water (oxidation-reduction potential = 887 mV) could be produced with a radical concentration of 9.5 × 10−9 M. In the pilot-scale study, the prototype system was applied to clean up petroleum-hydrocarbon polluted soils at a diesel-oil spill site via an on-site slurry-phase soil washing process. The total petroleum hydrocarbon (TPH)-contaminated soils were excavated and treated with the NEC water in a slurry-phase reactor. Results show that up to 74.4% of TPH (initial concentration = 2846 mg/kg) could be removed from soils after four rounds of NEC water treatment (soil and NEC water ratio for each batch = 10 kg: 40 L and reaction time = 10 min). Within the petroleum-hydrocarbon plume, one remediation well (RW) and two monitor wells (located 1 m and 3 m downgradient of the RW) were installed along the groundwater flow direction. The produced NEC water was injected into the RW and the TPH concentrations in groundwater (initial concentrations = 12.3–15.2 mg/L) were assessed in these three wells. Compared to the control well, TPH concentrations in RW and MW1 dropped to below 0.4 and 2.1 mg/L after 6 m3 of NEC water injection in RW, respectively. Results from the pilot-scale study indicate that the NEC water could effectively remediate TPH-contaminated soils and groundwater without secondary pollution production. The main treatment mechanisms included (1) in situ chemical oxidation via produced radicals, (2) desorption of petroleum hydrocarbons from soil particles due to the dispersion of nanobubbles into soil pores, and (3) enhanced TPH oxidation due to produced radicals and energy after nanobubble bursting.

Effect of different diesel treatments on growth of single and mixed plant communities and petroleum hydrocarbon dissipation during rhizoremediation

The use of mixed plant communities has been proposed to address phytotoxicity while improving plant stress tolerance and contaminant degradation. However, there has been conflicting findings on the use of mixed plant community. This study assessed the impact of three diesel treatments on plant growth and TPH dissipation in single and mixed plant communities. This involved greenhouse experiment with Medicago sativa, Festuca arundinacea, and Lolium perenne and Medicago sativa + Lolium perenne with the diesel-spiked soils at 102,000, 151,000 and 320,000 µg kg-1 TPH represented as Treatments 1, 2 and 3 respectively. Plant growth was inhibited with root biomass yield was greater compared to plant shoots especially for F. arundinacea and L. perenne. There was a significant decrease in the root biomass yield of M. sativa, L. perenne, F. arundinacea and M. sativa + L. perenne. The highest TPH dissipation of 81, 69 and 72 % was displayed by L. perenne in the Treatments 1, 2 and 3 respectively. However, TPH dissipation was generally comparable for the vegetated and unvegetated soil and were not significantly different (p>0.05) for the different plants and treatments. The impact of plant communities on the rhizoremediation of TPH-contaminated soils may dependent on factors such as plant species, TPH concentration stress tolerance and benefits of individual plant if mixed plants are to be employed.

Characterization and genome analysis of Acinetobacter oleivorans S4 as an efficient hydrocarbon-degrading and plant-growth-promoting rhizobacterium

Plant-growth-promoting rhizobacteria (PGPR) have received increasing attention for assisting phytoremediation. However, the effect of PGPR on total petroleum hydrocarbon (TPH) degradation and plant growth promotion and its underlying mechanism is not well understood. In this study, phenotypic analysis and whole genome sequencing were conducted to comprehensively characterize a newly isolated rhizobacterium strain S4, which was identified as Acinetobacter oleivorans, from a TPH-contaminated soil. The strain degraded 62.5% of initially spiked diesel (1%) in minimal media within six days and utilized n-alkanes with a wide range of chain length (i.e., C12 to C40). In addition, the strain showed phenotypic traits beneficial to plant growth, including siderophore production, indole-3-acetic acid synthesis and phosphate solubilization. Potential metabolic pathways and genes encoding proteins responsible for the phenotypic traits were identified. In a real TPH-contaminated soil, inoculation of Acinetobacter oleivorans S4 significantly enhanced the growth of tall fescue relative to the soil without inoculation. In contrast, inoculation of Bacillus sp. Z7, a hydrocarbon-degrading strain, showed a negligible effect on the growth of tall fescue. The removal efficiency of TPH with inoculation of Acinetobacter oleivorans S4 was significantly higher than those without inoculation or inoculation of Bacillus sp. Z7. These results suggested that traits of PGPR beneficial to plant growth are critical to assist phytoremediation. Furthermore, heavy metal resistance genes and benzoate and phenol degradation genes were found in the genome of Acinetobacter oleivorans S4, suggesting its application potential in broad scenarios.

Effect of Novosphingobium sp. CuT1 inoculation on the rhizoremediation of heavy metal- and diesel-contaminated soil planted with tall fescue.

Rhizoremediation is a promising method based on the synergism between plant and rhizobacteria to remediate soil co-contaminated with heavy metals and total petroleum hydrocarbons (TPHs). A plant growth-promoting (PGP) rhizobacterium with diesel-degrading capacity and heavy metal tolerance was isolated from the rhizosphere of tall fescue (Festuca arundinacea L.), after which the effects of its inoculation on rhizoremediation performance were evaluated in heavy metal- and diesel-contaminated soil planted with tall fescue. The bacterial isolate (Novosphingobium sp. CuT1) was characterized by its indole-3-acetic acid (IAA) production, 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase activity, and siderophore productivity as PGP traits. CuT1 was able to grow on 1/10 LB-agar plates containing 5mM of Cu or 5mM of Pb. To evaluate the remediation effect of heavy metal- and diesel-contaminated soil by CuT1 inoculation, the experimental conditions were prepared as follows. The soil was artificially contaminated with heavy metals (Cu and Pb) at a final concentration of 500ppm. The soil was then further contaminated with diesel at final concentrations of 0, 10,000, and 30,000ppm. Finally, all plots were planted with tall fescue, a representative hyperaccumulating plant. Compared to the rhizoremediation performance of the co-contaminated soil (Cu + Pb + diesel) without inoculation, the bioavailable Cu concentrations in the soil and the tall fescue biomass were significantly increased in CuT1 inoculation. Additionally, the root growth of tall fescue was also promoted in CuT1 inoculation. Correlation analysis showed that Cu bioavailability and bioconcentration factor were positively correlated with CuT1 inoculation. The diesel removal efficiency showed a positive correlation with CuT1 inoculation, although the diesel removal was below 30%. CuT1 inoculation was positively correlated with IAA and dehydrogenase activity in the soil. Moreover, the dry biomass of the tall fescue's roots was highly associated with CuT1 inoculation. Collectively, our findings suggest that Novosphingobium sp. CuT1 can be utilized as an applicable bioresource to enhance rhizoremediation performance in heavy metal- and TPH-contaminated soils.

Case Study on Evaluated Soil Health Properties Before and After Land Farming and Thermal Desorption for TPH-contaminated Soil

Case Study on Evaluated Soil Health Properties Before and After Land Farming and Thermal Desorption for TPH-contaminated Soil

Assessment of Different Spent Mushroom Substrates to Bioremediate Soils Contaminated with Petroleum Hydrocarbons

Bioremediation techniques are being developed as substitutes for physical–chemical methodologies that are expensive and not sustainable. For example, using the agricultural waste spent mushroom substrate (SMS) which contains valuable microbiota for soil bioremediation. In this work, SMSs of four cultivated fungal species, Pleurotus eryngii, Lentinula edodes, Pleurotus ostreatus, and Agaricus bisporus were evaluated for the bioremediation of soils contaminated by petroleum hydrocarbons (TPHs). The bioremediation test was carried out by mixing the four different SMSs with the TPH-contaminated soil in comparison with an unamended soil control to assess its natural attenuation. To determine the most efficient bioremediation strategy, hydrolase, dehydrogenase, and ligninolytic activities, ergosterol content, and percentage of TPHs degradation (total and by chains) were determined at the end of the assay at 40 days. The application of SMS significantly improved the degradation of TPHs with respect to the control. The most effective spent mushroom substrate to degrade TPHs was A. bisporus, followed by L. edodes and P. ostreatus. Similar results were obtained for the removal of aliphatic and aromatic hydrocarbons. The results showed the effectiveness of SMS to remove aliphatic and aromatic hydrocarbons from C10 to C35. This work demonstrates an alternative to valorizing an abundant agricultural waste as SMS to bioremediate contaminated soils.

Interaction and spatio-taxonomic patterns of the soil microbiome around oil production wells impacted by petroleum hydrocarbons

Numerous onshore oil production wells currently exist, and the petroleum hydrocarbon contamination of the surrounding soil caused by oil production wells is not well understood. Moreover, the impact of the distribution of the total petroleum hydrocarbons (TPH) in the soil on the microbiota requires further investigation. Accordingly, in this study, the distribution of petroleum hydrocarbons in the soils around oil production wells was investigated, and their alteration of the microbiota was revealed. The results revealed that in the horizontal direction, the heavily TPH-contaminated soils were mainly distributed within a circle with a radius of 200 cm centered on the oil production well; and in the vertical direction, the heavily TPH-contaminated soils were distributed within the 0–50 cm soil layer. A significant positive correlation was found between the microbial abundance and the TPH concentration in the soil with relatively low total carbon contents. Heavy TPH contamination (TPH concentration of >3000 mg/kg) significantly reduced the microbial diversity and altered the microbiota compared with the light TPH contamination (TPH concentration of around 1000 mg/kg). In the heavily TPH-contaminated soils, the relative abundances of the Proteobacteria and Bacteroides increased significantly; the network complexity among the soil microorganisms decreased; and the co-occurrence patterns were altered. In summary, the results of this study have reference value in the remediation of soils around oil production wells and provide guidance for the construction of microbial remediation systems for petroleum contamination.

Assessment of Soil Enzyme Activities in TPH-Contaminated Soil after Soil Washing and Landfarming Application

Assessment of Soil Enzyme Activities in TPH-Contaminated Soil after Soil Washing and Landfarming Application

Metagenomic Analysis for Evaluating Change in Bacterial Diversity in TPH-Contaminated Soil after Soil Remediation.

Soil washing and landfarming processes are widely used to remediate total petroleum hydrocarbon (TPH)-contaminated soil, but the impact of these processes on soil bacteria is not well understood. Four different states of soil (uncontaminated soil (control), TPH-contaminated soil (CS), after soil washing (SW), and landfarming (LF)) were collected from a soil remediation facility to investigate the impact of TPH and soil remediation processes on soil bacterial populations by metagenomic analysis. Results showed that TPH contamination reduced the operational taxonomic unit (OTU) number and alpha diversity of soil bacteria. Compared to SW and LF remediation techniques, LF increased more bacterial richness and diversity than SW, indicating that LF is a more effective technique for TPH remediation in terms of microbial recovery. Among different bacterial species, Proteobacteria were the most abundant in all soil groups followed by Actinobacteria, Acidobacteria, and Firmicutes. For each soil group, the distribution pattern of the Proteobacteria class was different. The most abundant classed were Alphaproteobacteria (16.56%) in uncontaminated soils, Deltaproteobacteria (34%) in TPH-contaminated soils, Betaproteobacteria (24%) in soil washing, and Gammaproteobacteria (24%) in landfarming, respectively. TPH-degrading bacteria were detected from soil washing (23%) and TPH-contaminated soils (21%) and decreased to 12% in landfarming soil. These results suggest that soil pollution can change the diversity of microbial groups and different remediation techniques have varied effective ranges for recovering bacterial communities and diversity. In conclusion, the landfarming process of TPH remediation is more advantageous than soil washing from the perspective of bacterial ecology.

Electrokinetic remediation of petroleum hydrocarbon contaminated soil (I)

The remediation of petroleum hydrocarbons (TPH) in a contaminated soil by electrokinetic (EK) treatment was studied in the laboratory. The effects of applying a constant electrical current on soil pH, moisture content, electrical conductivity (EC), temperature, and the concentrations of three fractions of TPH (C10–C16, C17–C34 and C35–C40) were investigated. The experiment was run for seven days and soil samples were collected at the end of the 7 day period for analysis of soil pH and TPH concentration. There were extreme pH conditions near the electrodes. At the end of the experiment there was around a 37% reduction of C10–C16 chain compounds compared to the initial concentration of 164 ± 18 mg/kg. The study investigated TPH remediation to a depth of 24 cm, which is significantly more than most studies of EK remediation of TPH-contaminated soils. We observed reductions in TPH concentrations even at a depth of 24 cm. The spatial distribution of reductions in TPH concentrations was also studied and it was observed that more remediation occurred near the cathodes than near the anodes. Further, the greatest reductions in TPH concentrations were recorded near the electrodes in the lowest and middle parts of the experimental set-up. The application of electrokinetics to remediate TPH-contaminatedsoils could be a viable option as an in situ remediation technology.

Mitigation of petroleum-hydrocarbon-contaminated hazardous soils using organic amendments: A review

The term “Total petroleum hydrocarbons” (TPH) is used to describe a complex mixture of petroleum-based hydrocarbons primarily derived from crude oil. Those compounds are considered as persistent organic pollutants in the terrestrial environment. A wide array of organic amendments is increasingly used for the remediation of TPH-contaminated soils. Organic amendments not only supply a source of carbon and nutrients but also add exogenous beneficial microorganisms to enhance the TPH degradation rate, thereby improving the soil health. Two fundamental approaches can be contemplated within the context of remediation of TPH-contaminated soils using organic amendments: (i) enhanced TPH sorption to the exogenous organic matter (immobilization) as it reduces the bioavailability of the contaminants, and (ii) increasing the solubility of the contaminants by supplying desorbing agents (mobilization) for enhancing the subsequent biodegradation. Net immobilization and mobilization of TPH have both been observed following the application of organic amendments to contaminated soils. This review examines the mechanisms for the enhanced remediation of TPH-contaminated soils by organic amendments and discusses the influencing factors in relation to sequestration, bioavailability, and subsequent biodegradation of TPH in soils. The uncertainty of mechanisms for various organic amendments in TPH remediation processes remains a critical area of future research.

Petroleum hydrocarbon rhizoremediation and soil microbial activity improvement via cluster root formation by wild proteaceae plant species

Rhizoremediation potential of different wild plant species for total (aliphatic) petroleum hydrocarbon (TPH)-contaminated soils was investigated. Three-week-old seedlings of Acacia inaequilatera, Acacia pyrifolia, Acacia stellaticeps, Banksia seminuda, Chloris truncata, Hakea prostrata, Hardenbergia violacea, and Triodia wiseana were transplanted in a soil contaminated with diesel and engine oil as TPH at pollution levels of 4,370 (TPH1) and 7,500 (TPH2) mg kg−1, and an uncontaminated control (TPH0). After 150 days, the presence of TPH negatively affected the plant growth, but the growth inhibition effect varied between the plant species. Plant growth and associated root biomass influenced the activity of rhizo-microbiome. The presence of B. seminuda, C. truncata, and H. prostrata significantly increased the TPH removal rate (up to 30% compared to the unplanted treatment) due to the stimulation of rhizosphere microorganisms. No significant difference was observed between TPH1 and TPH2 regarding the plant tolerance and rhizoremediation potentials of the three plant species. The presence of TPH stimulated cluster root formation in B. seminuda and H. prostrata which was associated with enhanced TPH remediation of these two members of Proteaceae family. These results indicated that B. seminuda, C. truncata, and H. prostrata wild plant species could be suitable candidates for the rhizoremediation of TPH-contaminated soil.

Spatial ecological risk assessment for contaminated soil in oiled fields

Soil total petroleum hydrocarbon (TPH) pollution in oil fields is a worldwide environmental problem. In particular, the dense distribution of oil wells in low-permeability oil reservoirs has caused regional pollution superposition. We proposed a feasible method for the spatial ecological assessment for soil pollution in oil fields. Typical TPH-contaminated soil in the Shengli oil field was examined according to the classification of oil well properties, including the spatial structure, distribution density, and exploitation history. Soil TPH concentrations of each oil filed site was calculated by Monte Carlo simulation. The risks were assessed according to multiple receptors and risk sources. The results indicated that the average TPH concentration was greater than 2100 mg·kg−1. The differences of TPH concentrations were mainly correlated to the exploitation period. The soil TPH content demonstrated a spatial cluster pattern according to the Anselin Local Moran’s Index (p < 0.01). The risk for wheat and earthworms showed that more than 98% of the study area was under a low risk level. However, high risk accounted for only 0.9% when bacteria was used as a bioindicator, and the composition of different risk levels was similar to that of the ecological risk assessed based on the soil quality index.

Rhizoremediation as a green technology for the remediation of petroleum hydrocarbon-contaminated soils

Rhizoremediation is increasingly becoming a green and sustainable alternative to physico-chemical methods for remediation of contaminated environments through the utilization of symbiotic relationship between plants and their associated soil microorganisms in the root zone. The overall efficiency can be enhanced by identifying suitable plant-microbe combinations for specific contaminants and supporting the process with the application of appropriate soil amendments. This approach not only involves promoting the existing activity of plants and soil microbes, but also introduces an adequate number of microorganisms with specific catabolic activity. Here, we reviewed recent literature on the main mechanisms and key factors in the rhizoremediation process with a particular focus on soils contaminated with total petroleum hydrocarbon (TPH). We then discuss the potential of different soil amendments to accelerate the remediation efficiency based on biostimulation and bioaugmentation processes. Notwithstanding some successes in well-controlled environments, rhizoremediation of TPH under field conditions is still not widespread and considered less attractive than physico-chemical methods. We catalogued the major pitfalls of this remediation approach at the field scale in TPH-contaminated sites and, provide some applicable situations for the future successful use of in situ rhizoremediation of TPH-contaminated soils.

Biodegradation of Total Petroleum Hydrocarbons in Soil: Isolation and Characterization of Bacterial Strains from Oil Contaminated Soil

In this study, we isolated seven strains (termed BY1–7) from polluted soil at an oil station and evaluated their abilities to degrade total petroleum hydrocarbons (TPHs). Following 16 rRNA sequence analysis, the strains were identified as belonging to the genera Bacillus, Acinetobacter, Sphingobium, Rhodococcus, and Pseudomonas, respectively. Growth characterization studies indicated that the optimal growth conditions for the majority of the strains was at 30 °C, with a pH value of approximately 7. Under these conditions, the strains showed a high TPH removal efficiency (50%) after incubation in beef extract peptone medium for seven days. Additionally, we investigated the effect of different growth media on growth impact factors that could potentially affect the strains’ biodegradation rates. Our results suggest a potential application for these strains to facilitate the biodegradation of TPH-contaminated soil.

RemScan: A tool for monitoring the bioremediation of Total Petroleum Hydrocarbons in contaminated soil

Total Petroleum Hydrocarbons (TPH) represent major environmental contaminants which pose a significant risk to ecosystems and humans heath if left untreated. Bioremediation represents a simple, cheap and environmentally-safe approach to clean up TPH-contaminated sites. Traditional TPH analysis is expensive and time-consuming. Here we assess, for the first time, the potential of RemScan as a fast, accurate and cost-effective portable device to be used as a tool to monitor the bioremediation process. A variety of TPH-contaminated soils were subject to TPH quantitative analysis using RemScan. The TPH values obtained were validated and compared against the results obtained from an accredited external laboratory, which uses Gas Chromatography / Mass Spectrometry (GC/MS) for TPH analysis.•RemScan showed a correlation coefficient (R2) of 0.998 in comparison with the traditional methods, but importantly with a significant reduction in both time and cost.•RemScan was successfully used to measure TPH concentrations in bioremediated, weathered-contaminated and highly contaminated soil samples with TPH concentrations varying from 100 to 100,000?mg?kg-1.•The RemScan Laboratory Station was used to minimize the source of errors associated with human manual handling.