Total Sulfur Content Research Articles

Understanding the ecological versatility of Tetracladium species in temperate forest soils.

Although Tetracladium species have traditionally been studied as aquatic saprotrophs, the growing number of metagenomic and metabarcoding reports detecting them in soil environments raises important questions about their ecological adaptability and versatility. We investigated the factors associated with the relative abundance, diversity and ecological dynamics of Tetracladium in temperate forest soils. Through amplicon sequencing of soil samples collected from 54 stands in six forest sites across the eastern United States, we identified 29 distinct Amplicon Sequence Variants (ASVs) representing Tetracladium, with large differences in relative abundance and small changes in ASV community composition among sites. Tetracladium richness was positively related to soil pH, soil temperature, total sulphur and silt content, and negatively related to plant litter quality, such as the lignin-to-nitrogen ratio and the lignocellulose index. Co-occurrence network analysis indicated negative relationships between Tetracladium and other abundant fungal groups, including ectomycorrhizal and arbuscular mycorrhizal fungi. Collectively, our findings highlight the ecological significance of Tetracladium in temperate forest soils and emphasize the importance of site-specific factors and microbial interactions in shaping their distribution patterns and ecological dynamics.

Fiber morphological characteristics of bamboo Ferrocalamus strictus culms from different geographical distribution regions

The fiber index including fiber length, width, wall thickness and lumen diameter of Ferrocalamus strictus culms (1, 2, and ≥ 3 years) from Jinping, Mojiang and Lvchun counties of Yunnan Province was determined and the elemental content of the soil was also determined to analyze the fiber characteristics. The average relative fiber index measured for F. strictus culms were fiber length (1.30 mm), width (21.57 μm), slenderness ratio (60.79 μm), wall thickness (4.21 μm), lumen diameter (7.22 μm), and runkel ratio (1.22 μm), which belonged to the range of middle and long fibers. The fiber length increased with the culm age. The proportion of long fiber increased while short fibers decreased along with culm maturing. The fiber morphology did not show a specific trend with the culm height. Fiber length reached the maximum in the bottom portions of the culms. There is a correlation between fiber morphology and soil elements, the content of organic matter, total potassium, total sulfur, total aluminum, total zinc, total iron, total boron, alkali-hydrolyzed nitrogen and available silicon in the soil affects fiber morphology. The content of organic matter, total boron and alkali-hydrolyzed nitrogen in the soil from Mojiang County was largest. Comparatively, the culm fiber in Mojiang County had the best fiber index performance for utilization, since the greatest proportion of medium and long fibers and the optimal distribution of fiber length frequency was obtained from the culms in Mojiang County. This study can provide a theoretical basis for large-scale bamboo forest cultivation and the development and utilization of bamboo culm fiber.

BIOLOGICALLY ACTIVE SUBSTANCES OF WILD PLANTS MEDICINAL PLANT Salicornia europaea L., NATIVE TO THE ABAI REGION

The article presents the results of a study of the nominal part of the Salicornia europaea L. population growing in the Republic of Abai. An elemental analysis of plant raw materials was carried out, the content of total carbon, organic carbon, nitrogen and sulfur was determined. An alcoholic extract of vegetable raw materials was obtained in the Soxlet apparatus. The extract was filtered and used for chemical analysis. Qualitative reactions revealed the presence of a number of biologically active substances in the extract, such as proteins, terpenes and steroids, tannins, xanthones, phenolic compounds, flavonoids, carboxylic acids and caratinoids. The quantitative determination of flavonoids and catechins in the extract was carried out. The spectrophotometry method showed that the content of flavonoids in the plant extract in terms of quercetin is 0.31±0.03 µg/ml. The content of catechins in the extract was determined by liquid chromatography, which amounted to 34.01±3.40 µg/ml. The FRAP (Iron Reducing Antioxidant Power) method is used an antioxidant strategy. It has been shown that with an increase in the concentration of the extract from 0.01 to 0.05 mg/ml, the antioxidant activity increases. At an extract concentration of 0.05 mg/ml, the antioxidant activity is 3.084 mg AAE/ml of the extract. It is concluded that the plant can serve as a raw material for production of cosmeceutical products.

Exploration geochemical evidence for the genesis of the Jiaodong gold deposits in eastern China: A case study of the Haiyu gold deposit

Jiaodong is the largest gold province in China and has great potential for further prospecting. It has been confirmed that the enrichment of Au is always accompanied by pyritization in Jiaodong gold deposits, so the genesis of pyritization in gold deposits and the mechanism of Au enrichment associated with pyritization has always been an issue of discussion to the researchers, the relationship between pyritization and Au enrichment is still unclear. In order to solve this problem, this paper studied the occurrence state and transformation characteristics of S in the ore-bearing geological bodies and discussed the mechanism of Au enrichment. 84 samples were collected from the drill hole ZK3006 of the Haiyu gold deposit, the average sampling interval was 15m, and 7 specific elements/analytical indexes were measured (Total sulfur, Reduced sulfur, Na2O,CaO, Sr, Ba, and Au), Burning-iodine quantity method was used to measure the content of Total sulfur, Combustion neutralization method was used to measure the content of Reduced sulfur Inductively coupled plasma-atomic emission spectrometry was used to measure the content of Na2O and CaO, Wavelength dispersive X-Ray fluorescence spectrometry was used to measure the content of Sr and Ba, and Foamed plastic enrichment-inductively coupled plasma-mass spectrometry was used to measure the content of Au.

Use of a Glaciogene Marine Clay (Ilulissat, Greenland) in a Pilot Production of Red Bricks.

Uplifted occurrences of fine-grained glaciogene marine sediments are found throughout the northern hemisphere. These sediments could be used to produce local construction materials, to rely less on imported construction materials from southern regions. In this study, a representative occurrence from Ilulissat, West Greenland, was investigated as a potential resource for local brick production. The study comprised three parts: (1) raw material characterization based on grain size distribution, major element chemistry, including total carbon, sulfur, and chloride concentrations, mineralogy, morphology, and Atterberg limits; (2) the production of test bricks at a Danish brickwork; and (3) testing of the bricks based on total shrinkage, water absorption, hygroscopic adsorption, open porosity, bulk density, compression strength, and mineralogy. The bricks produced proved to have excellent compression strength, low open porosity, and low water absorption. The shrinkage could be reduced by adding 10% chamotte to the marine sediment. Based on the investigated properties, this indicates that this type of clay is highly suitable as a resource for bricks.

Assessing hydrogen production potential from carbonate and shale source rocks: A geochemical investigation

The global push towards achieving net-zero carbon dioxide emissions by 2050 shows the urgency of transitioning to a hydrogen-based economy, with clean hydrogen fuel emerging as a fundamental component of future energy consumption. This study explores hydrogen production from geological sources, specifically organic-rich Shale and Carbonate mudrocks, as a significant and sustainable method for natural hydrogen production. Recognizing the critical challenge posed by the interaction of hydrogen with rock-forming minerals and organic matter during production, this research emphasizes the need for a comprehensive understanding of the geochemical composition of these rock materials. To assess the feasibility and implications of utilizing organic-rich source rocks for hydrogen production, we conducted thorough analyses of source rock samples from different formations. The representatives’ samples were subjected to comprehensive analyses including Rock-Eval pyrolysis, X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscope (SEM) examinations, and gas chromatography (GC) analysis of the produced gas. Our results revealed that the high total organic carbon (TOC) samples (average 14.7 %) with Type I and II kerogens yielded substantial hydrogen-rich gases, approximately 44.71 % and 36.02 % for SH-O1 and JOS samples, respectively. JOS produced slightly higher hydrocarbon gases (∼50 %) compared to SH-O1 (∼45 %), along with more H2S (5.78 %), due to higher total sulfur content. In contrast, the SH-C1 sample, characterized by very low TOC (0.27 %), predominantly quartz and muscovite minerals (>78 %), and Type IV kerogen, produced higher CO2 (22.09 %) and minimal hydrogen (1.27 %), highlighting the influence of mineralogical and geochemical composition. This study suggests that hydrocarbon source rocks with high organic matter content hold significant potential for maximizing energy gas recovery (>85 %, including hydrogen and hydrocarbons) through the pyrolysis of their kerogen content. These findings demonstrate the viability of hydrogen gas production from unconventional sources such as organic-rich shales, potentially impacting strategies for sustainable energy production and contributing significantly to global decarbonization efforts.

Imminent prognosis for piperazinium-based ionic liquids applications for coal desulfurization

Sulfur is one of the most important quality parameters for coal rank and utility in power generation. Combustion of coal having high sulfur content leads to SOx emissions which have detrimental impacts on the environment and human health. For sulfur remediation, N-methyl piperazinium-based room temperature ionic liquids (RTILs) were synthesized with two acidic anions precursors’ dimethyl sulfate and Perchloric acid. These novel RTILs were characterized using standardized analytical techniques of FTIR, 1H NMR, 13C NMR, HPLC, and TGA/DSC. Thermal stability of dimethyl piperazinium methyl sulfate [DMPI+][MeSO4−] and methyl piperazinium perchlorate [MPI+][ClO4−] was 284 °C and 256 °C. The proximate and ultimate analysis of coal samples collected from block II of the Thar coal field shows high moisture content (29–47 %) and gross calorific value between 5006–6660 Btu/lb suggesting it is Lignite-B type fuel. Total sulfur content in coal samples was 1–4.1 % reflecting variable degree of sulfurization. Coal cleansing through oxidative extractive desulfurization theme using nifty combinations of these acidic RTILs was verified by HPLC, FTIR, CHNS Elemental Analyzer, and X-ray Florescence (XRF) techniques. Sulfur leaching from the coal matrix was higher for methyl piperazinium perchlorate and an 85 % decrease in the sulfur part of coal along with increased heat content through this study suggests cleaner and sustainable use of coal.

Significant correlations between heavy metals and prokaryotes in the Okinawa Trough hydrothermal sediments

Prokaryotes play crucial roles in hydrothermal vent ecosystems, yet their interactions with heavy metals are not well understood. This study explored the diversity of prokaryotic communities and their correlations with heavy metals and nutrient elements in hydrothermal sediments from Okinawa Trough. A total of 117 bacterial genera in 26 bacterial phyla and 10 archaeal classes in 3 archaeal phyla were identified, including dominant prokaryotic phyla Planctomycetes, Acidobacteria, Verrucomicrobia, and Euryarchaeota. Furthermore, Fe (39.61 mg/g), Mn (2.84 mg/g) and Ba (0.36 mg/g) were found to be the most abundant heavy metals in the Okinawa hydrothermal sediments. Notably, the concentrations of Zn, Ba, Mn, total organic carbon, and total nitrogen significantly increased, whereas the total sulfur concentration distinctively decreased at sampling sites farther from hydrothermal vents. These changes corresponded with reductions in prokaryotic abundance and diversity. Most heavy metals, including Mn, Fe, Co, Cu and As, presented significant positive correlations with a number of prokaryotic genera in the nearby sediment samples. In contrast, both positive and negative correlations with prokaryotes were observed in remote sediment. The keystone taxa include Magnetospirillum, GOUTA19, Lysobacter, Kaistobacter, Treponema, and Clostridium were detected through prokaryote interspecies interactions. The functional predictions revealed significant genes involved in carbon fixation, nitrogen/sulfur cycling, heat shock protein, and metal resistance pathways. Structural equation modeling confirmed that metal and nutrient elements directly influence the composition of prokaryotic communities, which in turn affects the relative abundance of functional genes.

How can the microbial community in watershed sediment maintain its resistance in the presence of shifting antibiotic residuals?

The widespread presence of antibiotics in global watershed environments poses a serious threat to public health and ecosystems. It is essential to examine the resistance of microbial communities in watershed environments in response to shifting antibiotic residues. Sediment samples were collected from seven sites across a watershed, encompassing surface sediment (0–10 cm) and bottom sediment (30–40 cm) depths. The aim was to replicate exposure scenarios to different antibiotics (oxytetracycline (OTC) and sulfadiazine (SD)) at varying concentrations (0, 10, and 100 μg/L) in sediment overlying water, within controlled laboratory settings. The study findings revealed significant variations in the microbial community structure of sediments between different treatments, with distinct differences observed in the upper stream and top sediment layers compared to the sediments located downstream and in the bottom layers. After the introduction of antibiotics, a significant decrease in microbial nodes was observed in the genus-level co-occurrence network analysis of the bottom sediment layer, particularly in the OTC treatment groups. In contrast, the downstream region displayed more robust correlations among the top 20 genera than the upstream area. There was no significant variance observed in the expression of Antibiotic resistance genes (ARGs), consisting of tetracycline resistance genes (tetC, tetG, tetM, tetW, and tetX) and sulfonamide resistance genes (sul1, sul2, and sul3), between sediments in the top and bottom layers. Nevertheless, downstream samples exhibited significantly higher levels of ARGs when compared to upstream samples. Network correlation analysis indicated notably lower correlations between ARGs and bacterial genera in sediments from upstream or surface layers compared to those in downstream or deeper layers. Moreover, correlations in the sediments from surface layers and upstream regions showed a decreasing trend with increasing SD exposure concentrations, while those in deeper layers and downstream areas remained relatively stable. The presence of antibiotics notably enhanced the correlation between sediment properties and ARGs, particularly emphasizing associations with total carbon, nitrogen, and sulfur content. However, the introduction of SD and OTC resulted in a decrease in the influence of these sediment factors on microbial community functions related to sulfur and nitrogen metabolism, as indicated by KEGG (Kyoto Encyclopedia of Genes and Genomes) annotation. The research provided empirical evidence on how microbial resistance responds to changes in antibiotics in sediment samples taken from various depths and locations within a watershed. It emphasized the urgent need for heightened awareness of the movement and alteration of antibiotic resistance patterns in watershed ecosystems.

Dominant host phase of mercury within the sediments of the East China Sea inner shelf: Implications for mercury inputs

Mercury (Hg) concentrations normalized to their dominant hosts have been widely used to identify geological events such as massive volcanic eruptions. However, the modern Hg cycle has significantly changed, and the implications of host-normalized Hg concentrations for the Hg dynamics in contemporary coastal environments (e.g., sources, delivery mechanisms, and Hg fluxes) remain poorly understood. In this study, 66 surface sediment samples from the continental shelf of the East China Sea (ECS) were analyzed, and the total organic carbon (TOC), aluminum (Al), total sulfur (TS), and Hg concentrations were determined. Our results support that organic matter predominantly hosts Hg in these sediments. Factors such as the Hg source and abundances of organic fractions influence Hg distributions, with notable enrichment in the Changjiang River estuary and the inner shelf of the ECS, especially near the mud depocenter located off the Oujiang River estuary. The oxic to suboxic redox state and the lack of significant sulfide accumulation in surface sediments suggest that sulfides are not the primary Hg hosts. The Hg/TOC ratios, ranging from 3.0 to 169.6 (ppb/%), are particularly high in the Changjiang River estuary and exhibit an exponential correlation with the Hg accumulation rates (Hg-AR). These findings suggest that the host-normalized Hg concentration could serve as a valuable tool for assessing Hg dynamics where the accumulation rates are uncertain.

Geochemistry of Middle Jurassic Coals from the Dananhu Mine, Xinjiang: Emphasis on Sediment Source and Control Factors of Critical Metals

In recent years, coal-type critical metal deposits have become a research hotspot in coal geology. As a major coal-accumulating basin in the Xinjiang area, the Turpan-Hami Basin contains abundant coal resources and has the potential to become a large coal-type critical metal deposit. However, previous studies on the enrichment characteristics of critical metal elements in coal are few and need further research. Based on SEM-EDS, XRF, and ICP-MS experiments, this study investigates the coal petrology, mineralogy, and geochemistry of the No. 22 coal of the Xishanyao Formation from the Dananhu Coal Mine, Xinjiang, to identify the sediment source, depositional environment, and controlling factors of the critical metal elements of the No. 22 coal. The results showed that the Dananhu coals are characterized by a low ash yield, low total sulfur content, high volatile yield, and high inertinite proportions. Quartz, kaolinite, and illite are the main minerals in the coal. Compared with the world’s low-rank coals, Ni, Co, Mo, and Ta are slightly enriched, Li, Rb, Cs, Ba, Tl, Bi, and Ge are depleted, and the concentrations of other trace elements are comparable to the average values of the world’s low-rank coals. The REY of the Dannanhu coals exhibited high fractionation, with its enrichment patterns characterized by the H-type and M-H-type. Although most of the critical metals are not enriched in the Dannanhu coals, the Ga, Zr (Hf), and Nb (Ta) concentrations in the coal ash of the Dannanhu coals have reached the economic cut-off grade and have the potential to be a substitute for rare metal resources. The terrigenous detrital sources of the Dannanhu coals mainly come from the Paleozoic dacite, andesite, and a small amount of granite from the Harik Mountain and Eastern Bogda Mountain in the Turpan-Hami Basin. The Dannanhu coals are generally in a dry and hot depositional environment, with high salinity and weak reduction-oxidation. The low source input and weak reduction-oxidation environment have resulted in low concentrations of critical metal of the No. 22 coal from the Dananhu Coal Mine.

Comparative Analysis of Gracilaria chouae Polysaccharides Derived from Different Geographical Regions: Focusing on Their Chemical Composition, Rheological Properties, and Gel Characteristics.

Polysaccharides derived from diverse sources exhibit distinct rheological and gel properties, exerting a profound impact on their applicability in the food industry. In this study, we collected five Gracilaria chouae samples from distinct geographical regions, namely Rizhao (RZ), Lianyungang (LYG), Ningde (ND), Beihai (BH), and a wild source from Beihai (BHW). We conducted analyses on the chemical composition, viscosity, and rheological properties, as well as gel properties, to investigate the influence of chemical composition on variations in gel properties. The results revealed that the total sugar, sulfate content, and monosaccharide composition of G. chouae polysaccharides exhibit similarity; however, their anhydrogalactose content varies within a range of 15.31% to 18.98%. The molecular weight distribution of G. chouae polysaccharides ranged from 1.85 to 2.09 × 103 kDa. The apparent viscosity of the LYG and BHW polysaccharides was relatively high, whereas that of RZ and ND was comparatively low. The gel strength displayed a similar trend. BHW and LYG exhibited solid-like behavior, while ND, RZ, and BH demonstrated liquid-like characteristics at low frequencies. The redundancy analysis (RDA) analysis revealed a positive correlation between the texture profile analysis (TPA) characteristics and anhydrogalactose. The study could provide recommendations for the diverse applications of G. chouae polysaccharides derived from different geographical regions.

Study on the Physiochemical Properties of Liquefied Petroleum Gas Available by Cylinders in Bangladesh

The work analyzed the composition and other physiochemical properties of liquefied petroleum gas (LPG mixture available in Bangladesh by cylinder. LPG Composition (C2-C6), Butadiene, Total Sulfur, Cu Corrosion, Relative Density and Vapor Pressure were determined by respective ASTM methods. Free water content was measured visually and odour tested by smell detection. Data from nine samples were used to compare with ASTM and Indian Standards. The results of this analysis revealed that the LPG contains propane and butane with a certain range of ratio. But that has no free water content. The total Sulfur content is within the permissible limit according to ASTM Standards. The samples do not have corrosive hydrogen sulfide. The vapor pressure is lower than the maximum limit and have very low linear relationship with relative density. The calorific value is highly dependent on the propane and butane content and moderately related to the relative density. Compared to ASTM and Indian standards, the examined LPG mixtures are found to be safe for the tropical country.

Formation mechanism and control of a kind of pit-shaped defect in Cf53 rolled products

Aiming at the frequent issue of pit-shaped surface defects in S-bearing and Al-killed steel products and the related poor castability due to submerged entry nozzle (SEN) clogging, the melting and casting process of a popular auto steel Cf53 has been studied based on in-situ investigation and experimental analysis. To clarify the generation of the pit-shaped defects, the local surface chemistry, evolution of steel inclusions throughout the melting process, SEN clogging substances, and the internal relationship among them were systematically analyzed. The results show that this type of defect in the Cf53 rolled products is caused by the large-sized composite inclusions rich in CaS, which originate from the molten steel during the refining process, gradually accumulate on the inner wall of the SEN during casting, and finally lead to SEN clogging. The loose structure of clogging inclusions makes them prone to fall off into the mold and get trapped by solidifying steel shell. The formation mechanism of the inclusions was studied through FactSage software calculation. The results show that the increase in total sulfur and total calcium content, and the decrease in total oxygen content and temperature in steel will lead to CaS inclusion formation, which agrees reasonably well with experimental results. An optimized refining process to reduce calcium addition into molten steel is proposed accordingly, which achieves a remarkably alleviation in casting SEN clogging and an elimination of the pit-shaped defects on the final rolled products as well.

Thermal steam treatment effect of metallic sodium nanoparticles for high-carbon, low permeability Domanic rocks

In a study aimed at exploring novel methods for enhancing hydrocarbon extraction from shale reservoirs, we conducted an experimental study to model the effects of thermal steam treatment on high-carbon, low-permeability Domanic shale in the presence of sodium metal nanoparticles. We characterized the mineral composition of the rock samples and evaluated the yield and quality of extracted hydrocarbons before and after treatment. Our results demonstrated an increase in extract yield with increasing treatment temperature. Notably, we observed a significantly augmented effect when we introduced sodium nanoparticles into the reaction system, enabling a 100 °C reduction in treatment temperature while maintaining comparable capabilities for extracting organic matter. It was found that the experimental products exhibited enrichment in saturated hydrocarbons, coupled with a decrease in resinous-asphaltenic substances. Within the saturated fraction, we observed a shift towards lighter alkanes and cycloalkanes (C12–C14). Moreover, it has been found that the highest yield of low molecular weight liquid hydrocarbons is acheived in the experiment involving sodium nanoparticles at 250 °C. Upon further increasing the temperature to 300 °C, we noted a decline in liquid hydrocarbon content, accompanied by an increase in gaseous hydrocarbons (C1–C4). Besides, thermal steam treatment substantially reduced the proportion of sulfur-containing aromatic compounds, such as alkylbenzothiophenes, dibenzo- and naphthothiophenes, in the aromatic fraction. The addition of sodium nanoparticles facilitated near-complete desulfurization of this fraction. Moreover, we observed a significant reduction in the total sulfur content of the extracted organic matter. Hydrothermal treatment in the presence of nanoparticles induced transformations in the kerogen structure and structural and phase changes in the mineral components of the shale.

Sulfur stable isotopes in Paleogene coals of Northeast India

Sulfur stable isotope signatures are instrumental in tracing the sources and tracking the movement of sulfur in different environmental compartments, besides providing vital insights into the origin and transport dynamics. Sulfur stable isotope composition in coal can give valuable information regarding sulfur sources and the process of sulfur incorporation in coal. The present study was conducted to determine the total sulfur content and sulfur isotopic composition for bulk sulfur (bulk S δ34S) in Oligocene and Eocene coal samples from coal mines and a few coal stockings in northeast India. The results revealed that the total sulfur content in coal samples varied between 1.03 and 4.80 (wt%) with an average value of 2.64 wt%. The bulk S δ34S in coal samples exhibited a wide range between −4.66 ‰ to 14.78 ‰ (VCDT). Oligocene coal samples from mines in Arunachal Pradesh, Assam, and Nagaland were enriched with heavier sulfur isotopes relative to Eocene coal samples from the Jaintia Hills region of Meghalaya. A moderate positive correlation was observed in the Oligocene coal samples, in contrast to the moderate negative correlation found in the Eocene coal samples. The bulk S δ34S values and sulfur content in coal samples from coal stockings matched closely with Assam and Meghalaya mine samples. The findings of this study can be used to track the sources and movement of coal sulfur in various environmental compartments, besides providing valuable information about sulfur sources, the process of sulfur incorporation in coal, and the depositional environment.

Ulvans, sulfated β-d-galactans and xyloarabinogalactan: A comparative approach to extraction, structural characterization and antioxidant activity assessment

Antioxidants can be extracted from various seaweeds as natural ingredients for use in foods, cosmetics, and pharmaceuticals. The composition and structure of polysaccharides extracted from four green seaweeds: Ulva lactuca (UL), Halimeda opuntia (HO), Caulerpa racemosa (CR) and Chaetomorpha antennina (CA) were correlated with their antioxidant activities. Crude extracts were characterized by NMR (1H and 13C), HP-SEC, HPAEC-PAD and FTIR spectroscopy. Extracted polysaccharides were assayed spectrophotometrically for their total sugar, sulfate, phenolic and protein contents. The antioxidant capacities of each fractionated polysaccharide sample were evaluated by five methods, i.e., ABTS (2,2-azino-bis-[3-ethylbenzothiazoline-6-sulfonic acid]), DPPH (2,2-diphenyl-1-picrylhydrazyl radical), ferric-reducing power in FRAP (Ferric-reducing Antioxidant Power), superoxide dismutase (SOD), and the hydroxyl radical (OH) scavenging capacity assay. All polysaccharides had molecular weights (MW) under 1000 kDa, with HO having the lowest MW (<100 kDa). Polysaccharide extracts of UL (i.e., l-iduronic acid, 1,4-linked α-l-rhamnose, β-d-glucuronic acid) and CA were promising sources of antioxidants. The highest antioxidant capacity was measured in extracts from CA-2B (52.1 ± 0.9 μg/mL) using the ABTS assay, while CR-1B exhibited the highest antioxidant activity in both the FRAP (303.7 ± 8.2 μm/mL) and OH (28.4 ± 0.8%) assays. Taken together, useful insights were gained into the potential health benefits of selected green seaweed polysaccharides (i.e., ulvans, sulfated or/and pyruvylated β-d-galactans and sulfated xyloarabinogalactan) for applications in the pharmaceutical, food and biotechnology industries.

Geochemical and Organic Petrological Characteristics of the Bituminous Carbonate Succession (Upper Cretaceous Shu'ayb Formation) in Northern Jordan: Implications for Organic Matter Input and Paleosalinity, Paleoredox, and Paleoclimatic Conditions.

Bituminous carbonate rocks of the Upper Cretaceous Shu'ayb Formation from the Ajloun outcrop in Northern Jordan were geochemically and petrologically analyzed in this study. This study integrates kerogen microscopy results with geochemical results (i.e., biomarker, stable carbon isotope, and major elemental compositions) to understand the organic matter (OM) inputs and to reveal the dispositional setting and its effect on the occurrence of OM. The Shu'ayb bituminous carbonate rocks have high total organic carbon (TOC) and sulfur (S) contents, with average values of 12.3 and 4.59 wt %, respectively, indicating redox conditions during their precipitation. The high abundance of alginite (i.e., lamalginite) in the Shu'ayb bituminous carbonate sediments is a further evidence for redox conditions. The finding of mainly marine-derived OM was also demonstrated by the biomarker distribution and carbon isotope composition. The biomarkers are represented by a narrow Pr/Ph ratio of up to 0.97, abundance of tricyclic terpanes, and high C27 regular sterane, indicating that the OM was primarily derived from phytoplankton algae, along with small amounts of land plant-derived materials, and were accumulated under reducing conditions. The studied Shu'ayb bituminous carbonate facies is composed of mainly calcium (CaO; average, 45.10 wt %), with significant amounts of silicon (Si2O3; avg., 9.35 wt %), aluminum (Al2O3; avg., 6.91 wt %), and phosphorus (P2O3; avg., 1.47 wt %) and low amounts of iron (Fe2O3) and titanium (TiO2) of less than 1 wt %, indicating that the detrital influx was low in an open water depth system with higher primary bioproductivity. The geochemical proxy suggests that the Shu'ayb bituminous carbonate facies was established in a saline water environment, with Ca/Ca + Fe and S/TOC values of more than 0.9 and 0.50, respectively, which could be attributed to the increase in reducing conditions of the water column. The chemical index of alteration values of more than 0.8 also indicate that the Shu'ayb bituminous carbonate facies formed during warm and humid climatic conditions, thereby resulting in intense subaerial weathering.

Application of X-ray principles to quantify sulfur oxidation states in concrete

This study introduces a novel mathematical approach rooted in X-ray spectroscopy principles to evaluate the oxidation state of sulfur, which is then applied in concrete and cementitious materials. Unlike previous studies that relied on an empirical quadratic relationship based on the ratios of characteristic X-ray lines (SKα, SKβ, and SKβ') for sulfur oxidation state determination, unique linear relationships between the intensities of the three X-ray lines for each oxidation state and total sulfur were utilized. Rational equations are then derived by combining these linear relationships for each species. Two independent rational calibration curves are constructed using the SKβ/SKα and SKβ'/SKβ ratios for samples containing sulfide-sulfate mixtures, irrespective of total sulfur concentration within the range of 0.3% to 2.0% by weight of concrete. These equations demonstrated interchangeability across three simulated matrices (Portland cement, concrete, and silica) and two sulfide species (pyrrhotite and pyrite). Absolute quantification of sulfide and sulfate species in concrete is achieved by independently measuring total sulfur. Compared to previous quadratic and linear equations, this approach is shown to minimize the difference between the experimental and calculated ratios of the calibration samples. Agreement was also observed between the sulfate ratio calculated through the rational approach and gravimetric analysis for concrete samples.

Geochemistry of Cenozoic coals from Sarawak Basin, Malaysia: implications for paleoclimate, depositional conditions, and controls on petroleum potential

Forty Tertiary coals from Mukah-Balingian and Merit-Pila coalfields of the Sarawak Basin, Malaysia were investigated using bulk and molecular geochemical techniques such as proximate analysis, gas chromatography-mass spectrometry, elemental analyser, isotope ratio mass spectrometry, and inductively coupled plasma mass spectrometry to reconstruct their paleovegetation, paleoclimate, and environments of deposition. In addition, principal component analysis (PCA) of selected geochemical parameters was carried out to determine the controlling influences on the petroleum potential of the humic coals. δ13C values and the abundance of terpenoids imply the predominant contribution of angiosperms to the paleoflora. Bimetal proxies (Sr/Ba, Sr/Cu, and C-value), and δD values are generally suggestive of a warm and humid climate during the accumulation of the paleopeats. However, n-alkane proxies (Pwax, Paq, n-C23/n-C29, etc.) and polycyclic aromatic hydrocarbons (PAHs) distribution suggest that Balingian coals accumulated under relatively drier and strongly seasonal paleoclimate in the Late Pliocene. When compared with published global average abundances, the investigated coals are mostly depleted in major oxides and trace elements, suggesting peat accumulation in freshwater-influenced environments. Nonetheless, higher (> 0.5 wt%) total sulfur content in some Mukah-Balingian coals suggests some degree of epigenetic marine influence. Furthermore, the low to moderately-high ash contents of the Sarawak Basin coals indicate the presence of ombrotrophic and rheotrophic peat deposits. PCA result of selected geochemical proxies suggests that source input, paleoflora, and marine incursions are not major controlling influences on the petroleum potential. However, climatic, and depositional conditions appear to slightly influence the petroleum potential of the studied humic coals.