Total Porosity Research Articles

Laboratory investigation on the bioremediation technology for soilization of iron ore tailings.

The study's objective was to improve the physicochemical properties of iron ore tailings to restore iron ore tailings areas. The physicochemical properties of substrates with different ratios of organic matter and tailings were investigated, and plant growth on these substrates was observed to determine the effects of the mixing ratio on the physicochemical properties of iron ore tailings and identify the optimal mixing ratio. The addition of organic fertilizer and rice husk reduced the density of the substrate, increased the total porosity, and neutralized the alkalinity in the ore tailings. The water-holding capacity of the substrate was positively correlated with the content of rice husk. With increasing rice husk content, the water-holding capacity of the substrates greatly increased, as did the pore structure of the iron ore tailings. The shear strength of the substrates was optimal in Groups I and II, with cohesion peaking in Group II. However, the cohesion sharply decreased as the rice husk content increased, and the internal friction angle decreased. The optimal mixture was 100 g of iron ore tailings, 8 g of organic fertilizer, and 0.8 g of rice husk.

Micro-CT Analysis of Pore Structure in Upland Red Soil Under Different Long-Term Fertilization Regimes

This study hypothesized that long-term fertilization alters the pore structure and aggregate stability in upland red soil. A long-term fertilization experiment in Qiyang, Hunan, was conducted with three treatments: no fertilization (CK), nitrogen–phosphorus–potassium fertilization (NPK), and nitrogen–phosphorus–potassium combined with pig manure (NPKOM). X-ray computed tomography (CT) scanning technology was used to assess three-dimensional pore structures at both the soil column (50 mm diameter and 50 mm height) and aggregate scales (diameter 3–5 mm), alongside the evaluation of the soil’s physical and chemical properties. Results showed that the soil organic carbon content (SOC) increased by 44.8% in NPK and 112.5% in NPKOM compared to CK. NPKOM improved the aggregate stability by 51.6%, whereas NPK had no significant effect. At the soil column scale, NPK increased the total porosity by 13.7% but reduced larger pores (>0.06 mm), whereas NPKOM decreased the total porosity by 7.8% and increased larger pores. At the aggregate scale, NPKOM increased the porosity for pores >0.098 mm by 7.6 times compared to CK and 9.5 times compared to NPK. In conclusion, long-term NPKOM significantly enhances the SOC and aggregate stability and promotes larger pore formation, unlike NPK, which mainly increases SOC but does not improve the soil structure.

High-pressure thermal conductivity, speed of ultrasonic measurements and derived elastic modulus of sandstones with different porosity

The effect of pressure on thermal conductivity is an important for understanding the heat transfer processes in modeling applications in geothermal reservoirs and for optimization of the technology of geothermal energy extraction processes. The primary factors affecting the economics of any geothermal energy recovery process are the amount of heat present in the geothermal reservoir and rate of heat extraction, which strongly depend on the thermal properties of the reservoir rocks, which are functions of both temperature and pressure. The present paper aims to study the variation of thermal conductivity of five sandstone samples from the Germany Geothermal Field with various total (open and close) porosities of (6.8, 13.0, 15.44, 21.3, and 21.5%) with pressure up to 203 MPa, to overcome the existing lack of thermal conductivity data for the geothermal reservoir modeling. The improved steady-state heat-flow technique (contact method) was used to precisely (with an uncertainty of 4%) measure the thermal conductivity of the sandstone samples. Unlike previous studies, in the present work the effect of the contact thermal resistance on the measured values of thermal conductivity has been taken into account using a calibration procedure to increase the accuracy and reliability of the measured data. The results show that with the increase of the pressure at a fixed temperature of 293.15 K, the thermal conductivity of sandstone is linearly increasing with pressure from 0.52 to 1.73 GPa−1 depending on sandstone structural and mineralogical composition, porosity, and other characteristics, which falls in the same range reported by other authors for rock samples from different geothermal fields. The derived values of the thermal conductivity pressure coefficient are crucial for geothermal studies in order to effectively use the geothermal resources of the region, and are useful for scientific applications such as the development and testing of the accuracy, reliability, and predictive capability of existing thermal models of geothermal reservoirs. Based on the present experimental results, statistical analysis (correlation analysis) was revealed between the measured thermal conductivity of sandstone samples and open and close porosities. The role of closed and open porosities on the pressure dependence of thermal conductivity and elastic moduli is discussed. For the first time, we experimentally observed the difference of the influence of the open and closed porosities on the thermal conductivity and elastic properties of sandstones. It was experimentally confirmed that the effect of closed porosity on the thermal conductivity of sandstones is significantly greater than that of open porosity by 15 to 20%. The obtained results show that it is of great importance to study the changes in the thermal properties of the sandstones under pressure at realistic reservoir conditions for geothermal studies.

The Effect of the Construction of a Tillage Layer on the Infiltration of Snowmelt Water into Freeze–Thaw Soil in Cold Regions

The snow melting and runoff process in the black soil area of Northeast China has led to soil quality degradation in farmland, posing a threat to sustainable agricultural development. To investigate the regulatory effect of tillage layer construction on the infiltration characteristics of snowmelt water, a typical black soil in Northeast China was selected as the research object. Based on field experiments, four protective tillage treatments (CK: control treatment; SB: sub-soiling treatment; BC: biochar regulation treatment; SB + BC: sub-soiling tillage and biochar composite treatment) were set up, and the evolution of soil physical structure, soil thawing rate, snow melting infiltration characteristics, and the feedback effect of frozen layer evolution on snowmelt infiltration were analyzed. The research results indicate that sub-soiling and the application of biochar effectively regulate soil aggregate particle size and increase soil total porosity. Among them, at the 0–10 cm soil layer, the soil mean weight diameter (MWD) values under SB, BC, and SB + BC treatment conditions increased by 6.25%, 16.67%, and 19.35%, respectively, compared to the CK treatment. Sub-soiling increases the frequency of energy exchange between the soil and the environment, while biochar enhances soil heat storage performance and accelerates the melting rate of frozen soil layers. Therefore, under the SB + BC treatment conditions, the maximum soil freezing rate increased by 21.92%, 5.67%, and 25.12% compared to the CK, SB, and BC treatments, respectively. In addition, sub-soiling and biochar treatment effectively improved the penetration performance of snowmelt water into frozen soil layers, significantly enhancing the soil’s ability to store snowmelt water. Overall, it can be concluded that biochar regulation has a good improvement effect on the infiltration capacity of surface soil snowmelt water. Sub-soiling can enhance the overall snowmelt water holding capacity, and the synergistic effect of biochar and deep tillage is the best. These research results have important guiding significance for the rational construction of a protective tillage system model and the improvement of the utilization efficiency of snowmelt water resources in black soil areas.

Naturally Deposited Charcoal Enhances Water Retention Capacity of Subtropical Forest Soils

Charcoal, a byproduct resulting from incomplete combustion of biomass in fire events, can modify the physical properties of soil due to its high porosity and large surface area. To evaluate the impact of fire-deposited charcoal on soil hydraulic characteristics, soil–charcoal mixtures were analyzed to investigate the effects of different application doses (wt%: 0, 1%, 3%, 5%, 10% and 20%) of charcoal on soil bulk density (BD), porosity (total, capillary, and non-capillary), residual moisture after free drainage (RM), saturated water content (SC), and saturated hydraulic conductivity (Ks) of loamy and sandy soils collected from subtropical forests in south China. The results showed that the impact of charcoal on soil’s physical and hydraulic properties depends on the soil type and the application dose. The incorporation of charcoal significantly decreased the BD of sandy soil (p < 0.001), while a significant decrease in BD in loamy soil was only observed as a result of the higher application doses (10% and 20%) (p < 0.001). Charcoal application doses of 5% or higher led to a significant increase in the total porosity (TP) of sandy soil (p < 0.001) and doses of 3% and 20% resulted in a significant increase in the TP of loamy soil (p < 0.001). The capillary porosity (CP) of both sand and loamy soils significantly increased when charcoal was applied at doses of 3% or higher (p < 0.001). The minimum charcoal application dose that significantly increased the RM in sandy soil was 5%, while for loamy soil, the minimum effective dose was 10%. Charcoal applied at a dose of 3% significantly increased the Ks of sandy soil (p < 0.001), while no significant effect on Ks was observed for loamy soil (p > 0.05). Collectively, our findings suggest that fire-derived charcoal enhances the soil water-retention capacity in subtropical forests, with the effects becoming more pronounced at higher application doses and being particularly notable in sandy soil compared to loamy soil.

Investigation of the pore structure characteristics and fluid components of Quaternary mudstone biogas reservoirs: a case study of the Qaidam Basin in China

Quaternary mudstone biogas reservoirs in the Qaidam Basin have shown great potential. However, complex pore structures with high clay contents and high heterogeneity limit the understanding of the storage and migration principles of these reservoirs. In this paper, HPMI and nitrogen adsorption experiments, in combination with NMR experiments under water saturation, centrifugation, various drying temperatures and other conditions, were adopted to determine the pore structure characteristics. Specifically, the reservoir space types and pore radius distribution characteristics were clarified. The cutoff values for different types of pores were identified based on the water-saturated mudstone NMR T2 spectra for full aperture distribution scales jointly characterized by mercury injection and nitrogen adsorption experiments. Furthermore, the three pore components and the saturation of different fluids were obtained. The research results indicate that the mudstone biogas reservoir has developed various reservoir spaces, and the pore size is primarily in the micronanometer range. The average total porosity reaches 27.28%, but the proportion of movable water pores is only 9.23% with poor fluid mobility, and the fluids in the pores are mostly capillary-bound water and clay-bound water. Among the different lithologies, argillaceous sand is more likely to become a good production layer.

Characterization of microstructure and moisture distribution evolution of concrete using AC impedance spectroscopy

In this study, the AC impedance responses of concrete with different microstructures and water contents at elevated temperatures are examined. First, an equivalent circuit model of concrete is proposed. The simulation results of the equivalent circuit are in good agreement with the AC impedance spectrum. Then, semi-infinite, infinite, and barrier diffusion modes of water diffusion within concrete are proposed. The quantitative relationships between AC impedance parameters and moisture content of concrete are established. Finally, the equivalent porosity and thermal damage are characterized using AC impedance parameters. Both show linear relation with the total porosity obtained experimentally by porosity tests. Therefore, AC impedance spectroscopy can quantitatively characterize the internal microstructure and moisture content evolution, and further reveal the mechanism of the macro performance of concrete.

Effects of Applying Organic Amendments on Soil Aggregate Structure and Tomato Yield in Facility Agriculture.

Amendment significantly improves soil structure and promotes crop growth. To combat soil degradation and low crop yields in facility agriculture, it is crucial to study the optimal application rate of amendments. This study analyzed the effects of biochar, vermicompost, and mineral-source potassium fulvic acid on the stability of aggregate structure, soil nutrient content, and tomato yield in cambisols, providing a theoretical basis for improving the soil quality of plastic greenhouses in Southern China. A pot experiment on tomato cultivation was carried out in yellow-brown soil in plastic greenhouses. The experiment included eight treatments: 1% biochar (B1); 3% biochar (B3); 5% biochar (B5); 3% vermicompost (V3); 5% vermicompost (V5); 0.1% mineral-source potassium fulvic acid (F1); 0.2% mineral-source potassium fulvic acid (F2); and the control condition without adding soil amendments (CK). The results showed that the biochar and vermicompost treatments effectively reduced soil bulk density and increased total soil porosity. Compared to the control, treatments with soil amendments significantly increased soil pH and had different effects on soil nutrients: F2 showed the most significant improvement in the content of available nitrogen, available phosphorus, and available potassium, with an increase of 133.33%, 834.59%, and 74.34%, respectively; B3 treatment had the highest increase in dissolved organic carbon (DOC), while B5 treatment had the highest organic matter content. Compared to the CK, the particle size of the biochar treatment was mainly 0.053~0.25 mm, while the V3, F1, and F2 mainly occurred with a particle size > 0.25 mm; and V3 has the best aggregate stability. Biochar, vermicompost, and mineral potassium fulvic acid can all promote tomato yield, with the F2 and V3 treatments having a yield increase effect of over 30%. Furthermore, Pearson's correlation analysis showed a highly significant positive correlation between geometric mean diameter (GMD) and mean weight diameter (MWD), water-stable macroaggregate content (R0.25), and a positive correlation between alkaline-dissolved nitrogen, available phosphorus, dissolved organic carbon content, and aggregate stability indicators. Adding 0.2% mineral-source potassium fulvic acid optimizes cambisols' properties, enhances aggregate formation and stability, boosts tomato yield, and shows great application potential.

Inoculation of Arthrobacter sp. improves the growth of Acanthocalycium sp. and the fruits nutraceutical quality and the flowers longevity

Research objective: The aim of this work is on the inoculation in the growing medium of Arthrobacter sp. and its effects on the growth, flower quality and longevity of cactus plants. To this end, the study of biometric parameters, i.e. plants and flowers (height, weight, number and duration), as well as root growth (weight), and the presence of disease were quantified as measures of plant productivity and compared with those obtained from non-inoculated plants. The use of alginate microspheres as a means of bacterial inoculation was also considered. Materials and Methods: Seedlings of Acanthocalycium (2 years old) Ferrarii, A. Glaucum and A. Violaceum were immediately planted in pots after purchase, in substrate containing (sand 20%, pumice 20% and peat 60%; pH 7; electrical conductivity 0.7 dS/m; total porosity 80% (v/v). A randomised complete block design was applied for the experiments: the pots were randomly divided into two series, one series was inoculated with the bacteria and the other non-inoculated was used as a control. Each month, plant growth was assessed according to (1) plant height, (2) vegetative and root weight, (3) number of flowers per plant (4) flower duration. In addition, the occurrence of possible diseases, in particular Fusarium sp. and Verticillium sp., was assessed. Total flavonoids, total phenols and antioxidant activity were also analysed. Results and Discussion: The experiment showed that the use of Arthrobacter sp. can indeed significantly improve the vegetative and root growth of Acanthocalycium sp. cacti. In addition, there was a significant improvement in the number and floral longevity as well as in the phenol, flavonoid and antioxidant content of the fruits of the inoculated plants compared to the untreated control. The experiment also showed that mortality due to the pathogens Fusarium sp. and Verticillium sp. was significantly reduced in the treated plant. In agreement with these authors, we found that PGPB treatments increased agronomic parameters and improved Fusarium and Verticillium resistance. In general, the application of biostimulants can increase the synthesis of bioactive compounds in plants by increasing resistance to phytopathologies. Inoculation with Arthrobacter sp. led to a significant reduction in the number of dead plants with respect to the diseases analysed. As a result of the stimulating action demonstrated in Acanthocalycium, bioproducts suitable for nutraceutical purposes may be developed in the future. Therefore, new microbe-assisted technologies can help plants to resist stress conditions, improving their tolerance and productivity. Conclusions: Due to its ‘multifunctionality’, the genus Acanthocalycium is considered as one of the species of the future, for ornamental use and medicinal aspects, and new results may help reveal its potential in the context of the bio-economy and circular economy. As natural resources and cultural practices are crucial in defining the quality of flowers when destined for food/nutraceutical applications, the inoculation of Acanthocalycium with Arthrobacter sp. can be envisaged to provide better plant growth under conditions of environmental stress, or as a soil fertiliser, but also to improve the synthesis of natural products used for therapeutic applications.

A case study of crushed stone for road construction application: amphibolite and basalt varieties from Croatia

Crushed stone is one of the most exploited and important mineral raw material. Emphasis is given to determination of mineralogical and petrographic properties, of two genetically different rocks of silicate composition, commonly used as crushed stone for road constructions, as their physical properties depend on them. First is amphibolite from Vetovo, and second is basalt from Vratnik locality, both sourced from Croatia. Tests conducted according to European and Croatian norms evaluated the real and apparent density, open and total porosity, and water absorption of stones. The relationship between mineralogical and physical properties led to the following conclusions: the open porosity values of amphibolite samples are low, which is a consequence of the medium to high degree of metamorphism, (plagioclase and hornblenda), sosiritization, and undisturbed rock features. The total water saturation was achieved in a brief time, confirming this statement. The basalts have different porosity and water absorption values, which are consequences of differences their textural-structural properties (glassy, intersertal or intergranular groundmass), amount of amygdules, presence or absence of chlorite/volcanic glass. Furthermore, the percentage of plagioclase in the modal composition differs, and the plagioclase itself has been altered, and the amount of clay, sericite and calcite vary in two different varieties of basalt. Compared to amphibolites, basalts have notably higher water absorption values as well. Accordingly, the studied amphibolite has water absorption less than 0.5% and is suitable for use in a road construction application for wearing course in the asphalt pavement, and studied basalt is not.

Effect of layered fertilizer strategies on rapeseed (Brassica napus L.) productivity and soil macropore characteristics under mechanical direct-sowing

Layered fertilization parameters affects crop root system configuration and growth distribution, which in turn affects soil pore properties and aggregate structure. Therefore, understanding the spatial distribution of the root system and soil pore space is helpful in choosing a reasonable fertilization ratio in production practice, which ensures high and stable crop yields and at the same time improves fertilizer utilization and soil health. Albeit the impact of layered fertilization ratio at varied rates on soil pore characteristics in the soil profile at a microscale level remains limited. This study quantifies the impacts of layered fertilization ratio under on rapeseed root distribution and soil pore characteristics using the root analysis system and X-ray computed tomography (XCT). A new fertilization pattern that shallow-deep layer synchronized mechanical sowing was using, rotary tillage mixed fertilization in the shallow layer and 10 cm side-deep band fertilization in the deeper layer. It set five ratios of fertilizer amounts between shallow and deep layers as 0:4 (FD), 1:3 (FL), 2:2 (FM), 3:1 (FH), and 4:0 (F0), with non-fertilization (CK) as the control treatment. The results indicated that layered fertilization effectively improved the rape root conformation and spatial distribution, significantly increased total soil porosity and moisture content, and reduced soil bulk density and resistance (P < 0.05). Additionally, root configuration is closely related to soil pore structure and crop yield. Notably, compared with other treatments, the macroscopic porosity, equivalent pore diameter, hydraulic radius and roundness of FM treatment are significantly improved, and it effectively improves the yield and quality of rapeseed. Correlation analysis showed that the root system configuration parameters were negatively correlated with soil bulk density and resistance but positively correlated with soil moisture content, and macropore morphology parameters and rapeseed yield. Our study demonstrate that layered fertilization can improved rape growth and soil macropore porosity, but its effect depends on good tillage macropore characteristics and distribution created by reasonable fertilization ratio, which provided a theoretical basis for high-yield, efficient, green, and sustainable mechanized direct-sowing production of rapeseed.

Mixed hydrogen and biofuels cement clinker: Characterisation, microstructure, and performance

Over 35 % of the CO2 associated with cement production comes from operational energy. The cement industry needs alternative fuels to meet its net zero emissions target. This study investigated the influence of hydrogen mixed with biofuels, herein designated net zero fuel as an alternative to coal, on the clinker quality and performance of cement produced in an industrial cement plant. Scanning electron microscopy, X-ray diffraction and nuclear magnetic resonance were coupled to study the clinker mineralogy and polymorphs. Hydration and microstructure development in plain and slag blended cements based on the clinker were compared to commercial cement equivalent. The results revealed a lower alite/belite ratio, but a significant proportion of the belite was of the α′H-C2S polymorph. These reacted faster and compensated for the alite/belite ratio. Gel and micro-capillary pores were densified, which reduced total porosity and attained comparable strength to the reference plain and blended cement. This study demonstrates that the investigated net zero fuel-produced clinker meets compositional and strength requirements for plain and blended cement, providing a feasible pathway for the cement industry to lower its operational carbon significantly.

Unirrigated extensive green roofs in humid subtropics – Plant selection and substrate design for low maintenance and climate resilience

Low-maintenance extensive green roofs hold the potential for adapting to climate change, but there is a limited understanding of their effective design in humid subtropical regions. In this study, we aimed to investigate low-maintenance green roof ecosystems capable of thriving under heat stress. Plant growth performance was evaluated in the second year of an experimental green roof in southwest China. This green roof was unirrigated and involved two plant communities (forbs and grasses) cultivated in four substrate types. Metrics of growth performance, including plant survival, green coverage, visual appearance, leaf stomatal conductance, and substrate volumetric water content were used to analyze the impact of substrate on plant growth. ESP substrate, comprising 30 %v (percent of volume) expanded shale, 25 %v perlite, 25 %v vermiculite, and 20 %v compost, featured the highest porosity and optimal growth of forbs, achieving an average green coverage of 66.76 % and average visual appearance value of 3.56 throughout the monitoring period. The high total porosity of this substrate could be critical in facilitating root development and drainage. Moreover, during the summer’s heat and drought, while substrate water content is not a limiting factor for the survival of some established forbs, it remains crucial for the growth of grasses. Additionally, the same substrate impacts different plant communities variably. Four particularly well-performing forb species, namely Lycoris chinensis, Tradescantia pallida, Liriope muscari, and Salvia farinacea, demonstrated survival rates closed to 100 % and an average visual appearance value exceeding 3 was noted, and thus, they are recommended as plant candidates for unirrigated green roofs. The distinguished performance of these species is attributable to their adaptation to heat and drought through specific physiological traits. Our findings provide insights into vegetation selection and substrate optimization for the successful establishment of extensive green roofs that could be feasibly developed without irrigation in the humid subtropical regions.

Improving maize yield and drought tolerance in field conditions through activated biochar application

Amidst depleting water resources, rising crop water needs, changing climates, and soil fertility decline from inorganic modifications of soil, the need for sustainable agricultural solutions has been more pressing. The experimental work aimed to inspect the potential of organically activated biochar in improving soil physicochemical and nutrient status as well as improving biochemical and physiological processes, and optimizing yield-related attributes under optimal and deficit irrigation conditions. Biochar enhances soil structure, water retention, and nutrient availability, while improving plant nutrient uptake and drought resilience. The field experiment with maize crop was conducted in Hardaas Pur (32°38.37’N, 74°9.00’E), Gujrat, Pakistan. The experiment involved the use of DK-9108, DK-6321, and Sarhaab maize hybrid seeds, with five moisture levels of evapotranspiration (100% ETC, 80% ETC, 70% ETC, 60% ETC, and 50% ETC) maintained throughout the crop seasons. Furthermore, activated biochar was applied at three levels: 0 tons/ha (no biochar), 5 tons per hectare, and 10 tons per hectare. The study’s findings revealed significant improvements in soil organic matter, bulk density, nutrient profile and total porosity with biochar supplementation in soil. Maize plants grown under lower levels of ETC in biochar supplemented soil had enhanced membrane stability index (1.6 times higher) increased protein content (1.4 times higher), reduced malondialdehyde levels (0.7 times lower), improved antioxidant enzyme activity (1.3 times more SOD and POD activity, and 1.2 times more CAT activity), improved relative growth (1.05 times more) and enhanced yield parameters (26% more grain and stover yield, 16% more 1000-seed weight, 29% more total seed weight, 33% more apparent water productivity) than control. Additionally, among the two biochar application levels tested, the 5 tons/ha dose demonstrated superior efficiency compared to the 10 tons/ha biochar dose.

Drill cuttings from oil exploration improve properties of substrate and growth of Ipê-branco ( Tabebuia roseoalba ) seedlings

ABSTRACT More information is needed on the potential of using drill cuttings (crushed rocks) from the oil industry in agriculture and forestry. An experiment in forest nursery was carried out to evaluate the influence of substrates formulated from onshore gravel on characteristics of Ipê-branco (Tabebuia roseoalba) seedlings (i.e., growth, quality, and nutrition). We used five gravimetric proportions of gravel from drill cuttings mixed with Pinus-bark - commercial substrate (Mecplant® Florestal 3): control with only commercial substrate and zero gravel (G0), 2.5 % gravel (G2.5), 5 % gravel (G5), 7.5 % gravel (G7.5), and 10 % gravel (G10). In general, high proportion of drill cuttings increases density and decrease current moisture and total porosity of the formulated substrates. The drill cuttings proportions G2.5, G5 and G7.5 significantly contributed to the available water and readily available water in these substrates, with percentage values ranging 23 – 30 % higher than the G10 substrate. Increasing the gravel proportion generally resulted in increased pH levels, P, Na, K and metals (Cu, Fe, Ni, Mn, Cd, Zn, Cr and Pb), except for Ca and Mg nutrients that decreased. Heavy metal contents in all substrates did not exceed the permissible values in legal standards. The G2.5 and G5 substrates increased by 20 % approximately the stem diameter and height of seedlings, and G2.5 proportion also affected the root dry mass and Dickson quality index, with values two times higher than G0 substrate. Multivariate analysis proved suitable as a complementary approach to evaluate the seedling quality. Drilling cuttings addition, in general, increased the accumulation of nutrients and heavy metals of the Ipê-branco seedlings, and G2.5 and G5 substrates provided the greatest accumulation of the nutrients P, Ca, Pb and Zn in the shoot, while G2.5 proportion contributed with higher accumulation of N, Ca, Fe, Cr, Mn and Pb in the root. Adding drill cuttings as a conditioning component of the substrate at 2.5 and 5 % proportions is a viable alternative for using this residue to produce high-quality Tabebuia roseoalba seedling.

Artificial Grassland Revegetation Improves Soil Water Retention and Storage Capacity of the Degraded Hillside Alpine Meadow

ABSTRACTThe crucial role of soil water retention and storage in soil hydrology and the water cycle is well established. However, in sensitive and degraded ecosystems like alpine meadows, the effectiveness of revegetation in enhancing these critical functions remains understudied. This study investigates the effects of revegetating severely degraded hillside meadows with artificial grasslands on soil water retention and storage capacity in the Qinghai‐Tibetan Plateau. Soil analyses at a depth of 0–20 cm revealed significant improvements in soil properties after revegetation, with increases in soil organic matter content (86.8%), total porosity (11.9%), capillary porosity (31.6%), and clay content (13.5%). Both the saturated hydraulic conductivity (Ks) and field capacity (FC) increased markedly, by 9.7% and 63.7% in the upper layer (0–10 cm) and 21.7% and 69.6% in the lower layer (10–20 cm), respectively. Structural equation modeling identified bulk density, root mass density, FC, capillary porosity, and clay content as the dominant direct factors influencing Ks with path coefficients of −0.56, 0.30, −0.53, 0.57, and −0.12, respectively, while vegetation cover and aboveground biomass were found to have indirect influences. These findings demonstrate that revegetation with artificial grasslands effectively improves soil water retention and storage capacity in degraded hillside alpine meadows by regulating key soil hydraulic and physical properties. This enhanced water‐holding capacity has significant implications for understanding the dynamics of revegetation by artificial grassland establishment in improving ecosystem health and eco‐hydrological functions in these vulnerable environments. Furthermore, the study provides valuable insights and a theoretical basis for developing ecological restoration solutions for degraded hillside meadows in other alpine regions.

Study on the pore structure and permeability evolution of tight sandstone under liquid nitrogen freezing‐thawing cycles based on NMR technology

To further raise the gas extraction efficiency of the tight sandstone, the liquid nitrogen (LN2) freezing-thawing cycles method can be employed to improve the permeability of the low-permeability reservoirs. Permeability is generally regarded as a macroscopic description of the pore structure and usually has functional relationship to pore structure properties. The permeability of the rock is closely related to the change of microscopic pore structure. The permeability of rock depends on how the subzero temperatures changed the microscopic pore structure of rock, but it has not yet been confirmed obviously. In this study, the nuclear magnetic resonance (NMR) technique was adopted to investigate the pore structure evolution law and permeability of the tight sandstone with different LN2 freezing-thawing cycles. The results demonstrate that the LN2 freezing-thawing cycles promotes pore development and micro-fracture connection, and enhances the pore connectivity. The proportion of meso-pores, macro-pores and micro-fractures in the sandstone samples increases significantly, which provides a channel for the sandstone gas flow and extraction. Total porosity and effective porosity of the samples present a trend of rapid increase as the number of LN2 freezing-thawing cycles increasing, while the residual porosity decreases as the number of LN2 freezing-thawing cycles increasing. Coates model, SDR model (mean T2 model) and PP model were used to calculate and evaluate the permeability of the samples subjected to different LN2 freezing-thawing cycles. Furthermore, PP model can provide a better permeability estimate than the classical Coates and SDR model.

The delineation of management zones using soil quality indices for the cultivation of irrigated rice (Oryza sativa L.) in Huila, Colombia

Conventional intensive farming systems can result in degraded soil. It is therefore important to monitor this effect periodically by delineating management zones (MZ) based on soil quality indices (SQI) in order to maintain and improve the soil characteristics in a precision farming environment and obtain homogeneous rice yields. The aim of this study was to determine and spatialise SQI and delineate MZ for cultivating flooded rice in an area of Fluvisols in Huila, Colombia. Forty-one georeferenced soil samples were collected from the 0 to 20 cm layer, and the physical, chemical and biological attributes of the soil were analysed to calculate the Integrated Quality Index (IQI) and the Nemoro Quality Index (NQI) using linear scoring functions. Geostatistical tools were then used to fit semivariogram models of the SQI, and interpolated using ordinary kriging to map the MZ using the QGIS software. The IQI and NQI showed a moderate spatial correlation, which allowed three distinct MZ to be identified and delineated. Attributes, such as bulk density (Bd), total porosity (TP), soil respiration (SR), available water (AW) and soil organic matter (SOM) were significant and can be used as a guide by farmers for restoring the quality of the soil in rice production. The method proved to be effective, and provided an information base to be used in the local management of areas of rice cultivation in the study region.

Assessment of the Effects of Biochar on the Physicochemical Properties of Saline–Alkali Soil Based on Meta-Analysis

Enhancing global agricultural sustainability critically requires improving the physicochemical properties of saline–alkali soil. Biochar has gained increasing attention as a strategy due to its unique properties. However, its effect on the physicochemical properties of saline–alkali soil varies significantly. This study uses psychometric meta-analysis across 137 studies to synthesize the findings from 1447 relatively independent data sets. This study investigates the effects of biochar with different characteristics on the top 20 cm of various saline–alkali soils. In addition, aggregated boosted tree (ABT) analysis was used to identify the key factors of biochar influencing the physicochemical properties of saline soils. The results showed that biochar application has a positive effect on improving soil properties by reducing the sodium adsorption ratio (SAR) and the exchangeable sodium percentage (ESP) by 30.31% and 28.88%, respectively, with a notable 48.97% enhancement in cation exchange capacity (CEC). A significant inverse relationship was found between soil salinity (SC) and ESP, while other factors were synergistic. Biochar application to mildly saline soil (&lt;0.2%) and moderately saline soil (0.2–0.4%) demonstrated greater improvement in soil bulk density (SBD), total porosity (TP), and soil moisture content (SMC) compared to highly saline soil (&gt;0.4%). However, the reduction in SC in highly saline soil was 4.9 times greater than in moderately saline soils. The enhancement of soil physical properties positively correlated with higher biochar application rates, largely driven by soil movements associated with the migration of soil moisture. Biochar produced at 401–500 °C was generally the most effective in improving the physicochemical properties of various saline–alkali soils. In water surplus regions, for mildly saline soil with pH &lt; 8.5, mixed biochar (pH 6–8) at 41–80 t ha−1 was the most effective in soil improvement. Moreover, in water deficit areas with soil at pH ≥ 8.5, biochar with pH ≤ 6 applied at rates of &gt;80 t ha−1 showed the greatest benefits. Agricultural residue biochar showed superior efficiency in ameliorating highly alkaline (pH ≥ 8.5) soil. In contrast, the use of mixed types of biochar was the most effective in the amelioration of other soil types.

Aging damage characteristics of acid‐etched sandstone samples

AbstractTo investigate the erosive damage effect of the acidic solution on sandstone, experiments were conducted to examine the macro‐ and micro‐characteristics of sandstone samples under different acid etching times. Microscopic morphology changes, pore structure characteristics, mineral composition changes, and mechanical response characteristics were obtained before and after acid etching. Finally, a comprehensive evaluation index for acid etching damage was proposed. The results show that: (1) Acidic solution will erode the sandstone skeleton and cause the sandstone to collapse. The etched surface appears “flocculent” and yellow sediment is produced. (2) The pores in sandstone samples are mainly micro‐ and mesopores, and the total porosity increases exponentially with the duration of acid etching. The volume fraction of micropores can reach up to 81.5%. (3) The acid etching process of sandstone samples includes physical diffusion and chemical dissolution, which can be divided into four stages and three regions from the outside to the inside. After acid etching, the uniaxial compression failure mode of the sample changes from shear to mixed shear‐tensile failure. (4) The comprehensive evaluation index based on three failure modes generated during the loading process shows good consistency with the overall changes of characteristics parameters such as elastic modulus, peak stress, and peak strain. The research findings of this paper can provide theoretical support for the assessment of rock mass stability and disaster prevention in acidic environments.