Total Hip Arthroplasty Constructs Research Articles

FUNCTIONAL OUTCOME OF TOTAL HIP ARTHROPLASTY WITH DUAL MOBILITY CUPS IN HIP ARTHRITIS-A PROSPECTIVE COHORT STUDY

Background: Dual mobility (DM) total hip arthroplasty (THA) has gained popularity due to its potential to enhance stability and reduce dislocation rates compared to traditional THA constructs. However, there is a need for further investigation into its functional outcomes, complications, and implant survivorship. Method: We conducted a hospital-based prospective study involving 50 patients undergoing total hip replacement over a one-year period. Functional outcomes were assessed using the Harris Hip Score (HHS) and Posterior Muscle Endurance (PME) Score. Descriptive statistics were used for data analysis. Results: The study population consisted predominantly of older patients (mean age 64.30 years), with a higher representation of males (56%). The most common diagnosis was neck of femur fracture (NOF#) (75%), with a balanced distribution of cemented (40%), uncemented (40%), and hybrid (20%) fixation techniques. HHS and PME scores showed significant improvements over 12 months, with excellent outcomes observed in 61.1% of participants. Complications occurred in 14% of patients, with peri-prosthetic fracture and surgical site infection being the most common. Implant survivorship at final follow-up was 94%. Conclusion: Dual mobility cup total hip replacement demonstrates promising outcomes in terms of functional improvement, low complication rates, and high implant survivorship. It represents a viable option for patients undergoing THA, particularly those at risk of dislocation. Further research, including prospective comparative studies, is needed to better understand its long-term efficacy and suitability across different patient populations.

Long-Term Outcome of Metal-on-Metal Total Hip Arthroplasty with Modular Neck Stem.

Background: This study aimed to report the long-term outcomes of total hip arthroplasty (THA) using a Conserve Plus (Wright Medical, Japan) metal-on-metal (MoM) acetabular prosthesis with a modular neck stem. Methods: This study enrolled 50 patients (10 men and 40 women; mean age, 65.8 (39-87) years) who underwent primary THA using a Conserve Plus MoM acetabular prosthesis with a modular neck stem. The preoperative diagnosis in most patients was osteoarthritis. Clinical function of hip joint outcomes was investigated using the Japanese Orthopedic Association (JOA) hip score preoperatively and at the final follow-up. The perfect JOA hip score was 100, while the worst score was 0. Radiological analyses were evaluated during the final follow-up visit. Magnetic resonance imaging (MRI) images were evaluated to screen for pseudotumors in 43 hips postoperatively. Results: Six patients did not visit before their 10-year follow-up for unknown reasons. Therefore, 44 patients were evaluated at a mean of 11-years of follow-up (10-12 years). The mean (±SD) preoperative JOA hip score of 44.2 (±15.5) improved significantly to 85.1 (±12.9) postoperatively at the final follow-up (n = 36 hips, excluding eight revision cases). One patient underwent femoral fixation for a periprosthetic fracture due to trauma that occurred 4 years postoperatively. Spot welds were identified in 93.2% (41/44 hips) of cases. Severe (third- and fourth-degree) stress shielding was identified in 40.9% (18/44 hips) of cases. Twenty-two patients (51.2%) had pseudotumors attributable to MoM articulation based on MRI results, 2 to 10 years after arthroplasty. Three hips showed cup osteolysis (7%) and three showed trochanteric region osteolysis (7%). There were seven cup and/or three stem revisions for aseptic loosening and/or osteolysis at 4 months (with trauma) and 3.3 to 11 years (with pseudotumor) postoperatively. The Kaplan-Meier survivorship for the THA construct in this group was constant at 93.0% and 75.9% at 10 and 12 years after arthroplasty, respectively. The rates of survivorship of revision and loss of follow-up at 10 and 12 years were 83.9% and 66.8%, respectively. Conclusions: In summary, we reported on the long-term treatment results of MoM THA, precautions based on our cohort's findings, and the measures taken to address these issues, such as revision replacement and its outcomes. Clinical scores revealed good outcomes during the mean 11-year follow-up period. However, the prevalence of pseudotumors (PTs) was 51.2%. Some cases required revisions even after the 10 years following surgery. This is because in MoM THA, PT occurrence increases over time, and as a result, there were cases in which revised THA was required even after 10 years.

No Impact of Contact Between the Medial Collar of a Hydroxyapatite-Coated Triple-Tapered Stem and the Femoral Neck on Periprosthetic Bone Mineral Density

BackgroundHydroxyapatite-coated, triple-tapered, shorter-length stems with a medial collar have been reported with good results for a few years. We investigated whether contact between the medial collar and femoral neck affects clinical outcomes and changes in bone mineral density (BMD) in patients who have this type of stem in their total hip arthroplasty construct. MethodsThis was a retrospective, single-center study involving 62 patients scheduled for unilateral total hip arthroplasty using a hydroxyapatite-coated, triple-tapered, shorter-length stem who were followed for at least 1 year postoperatively. All patients had a Dorr type B femoral canal shape. Contact between the medial collar and the femoral neck was evaluated by computed tomography at the third postoperative month, and patients were classified into 2 groups. Postoperative clinical outcomes were investigated by the Western Ontario and McMaster Universities Arthritis Index and the Japanese Orthopaedic Association scores; radiological evaluation included stem fixation, spot welds and cortical hypertrophy, postoperative 3-dimensional stem alignment, and periprosthetic BMD changes. ResultsThere were 51 patients in the Contact + group (collar and neck contact) and 11 in the Contact-group (no contact). There were no differences between the 2 groups in the improvement of Western Ontario and McMaster Universities Arthritis Index and Japanese Orthopaedic Association scores, stem fixation, occurrence of cortical hypertrophy, or 3-dimensional stem alignment. Radiolucent lines were present in zones 3, 4, and 5 in 6 patients (12%) in the Contact + group only, who had no statistical difference between the 2 groups. Bone mineral density (BMD) decreased most in zone 7 in both groups, with no difference between the 2 groups. ConclusionsThe presence or absence of contact between the medial collar and femoral neck did not affect postoperative BMD changes or radiological or clinical results. Level of EvidenceTherapeutic Level III.

Cementation in total hip arthroplasty: history, principles, and technique.

Total hip arthroplasty (THA) is a remarkably successful operation that has grown rapidly its utilization. Early modern THA constructs as developed by Sir John Charnley featured cemented femoral stems and acetabular components. The technique of cementing components for THA has evolved over time. Modern acetabular preparation requires exposure of the subchondral bone with appropriate cement penetration into the trabecular bone, whereas femoral preparation requires cleaning of the canal, cement restrictor placement, retrograde filling, and pressurization of the cement. When used appropriately, these techniques result in excellent long-term survivorship of implants and are also widely considered to be the ideal method of fixation for hip fractures. The purpose of this article to review the history, properties, techniques, and outcomes of bone cement utilization in THA.

Polyethylene wear of dual mobility cups: a comparative analysis based on patient-specific finite element modeling

PurposeConcerns remain about potential increased wear with dual mobility cups related to the multiple articulations involved in this specific design of implant. This finite element analysis study aimed to compare polyethylene (PE) wear between dual mobility cup and conventional acetabular component, and between the use of conventional ultra-high molecular weight PE (UHMWPE) and highly cross-linked PE (XPLE).MethodsPatient-specific finite element modeling was developed for 15 patients undergoing primary total hip arthroplasty (THA). Five acetabular components were 3D modeled and compared in THA constructs replicating existing implants: a dual mobility cup with a 22.2-mm-diameter femoral head against UHMWPE or XLPE (DM22PE or DM22XL), a conventional cup with a 22.2-mm-diameter femoral head against UHMWPE (SD22PE) and a conventional cup with a 32-mm-diameter femoral head against UHMWPE or XLPE (SD32PE or SD32XL).ResultsDM22PE produced 4.6 times and 5.1 times more volumetric wear than SD32XL and DM22XL (p < 0.0001, Cohen’s d = 6.97 and 7.11; respectively). However, even if significant, the differences in volumetric wear between DM22XL and SD32XL as well as between DM22PE and SD22PE or SD32PE were small according to their effect size (p < 0.0001, Cohen’s |d|= 0.48 to 0.65) and could be therefore considered as clinically negligible.ConclusionWhen using XLPE instead of UHMWPE, dual mobility cup with a 22.2-mm-diameter femoral head produced a similar amount of volumetric wear than conventional acetabular component with a 32-mm-diameter femoral head against XLPE. Therefore, XLPE is advocated in dual mobility cup to improve its wear performance.

Prevalence of groin pain after primary dual-mobility total hip arthroplasty.

Instability remains a challenging problem following total hip arthroplasty (THA). Dual-mobility (DM) components are used with increasing frequency to mitigate this potential complication. As has been shown with larger metal-on-metal (MoM) THA, the larger size femoral head may pose an increased risk of groin pain. This study aims to evaluate the prevalence of groin pain following primary DM THA compared to other THA constructs. We identified 190 primary THAs (183 patients) performed with DM components at a single academic institution from 2008 to 2017. We retrospectively reviewed standardised patient questionnaires and the electronic medical record to determine the prevalence of groin pain. DM patients were compared to historical controls of 39 MoM hip resurfacing, 26 large-head MoM THA, and 217 conventional THA. Mean age was 64 years, 58% were female, mean body mass index was 30 kg/m2, and mean follow-up was 3.5 years (range 2-8 years). The prevalence of groin pain in patients with DM components was 5%, similar to the prevalence reported by patients with conventional THA (7%). There was a decreased prevalence of groin pain in DM patients compared to hip resurfacing (18%) and MoM THA (15%). Among the 9 DM patients with groin pain, 1 was treated with iliopsoas injection, and 1 underwent radiofrequency ablation of the articular nerve. This study documents a relatively low prevalence of groin pain among primary DM THA patients. This is comparable with historical controls of conventional THA and decreased compared to hip resurfacing and large head MoM THA.

Effect of Bone Coverage on Acetabular Implant Stresses in Standard and Dual-Mobility Total Hip Arthroplasty Constructs: A Finite Element Model.

Although mechanical stress in total hip arthroplasty modular head-neck junctions is thought to contribute to the risk of trunnionosis and related metal ion disease in total hip arthroplasty, little is known about mechanical stress in the modular acetabular components. Recent retrieval analyses of dual-mobility constructs have demonstrated corrosion between liner and shell in some dual-mobility acetabular components. The objective of this study was to evaluate acetabular stress as a function of acetabular bone coverage, component modularity, and femoral head diameter. A parametric finite element model was created. The acetabulum was set at 40° of abduction and 15° of anteversion; superolateral bone loss up to 50° was modeled; and 28-mm, 32-mm, 36-mm, and 40-mm head sizes were simulated in stance phase of gait. Fixed polyethylene-bearing, monoblock and modular dual-mobility (MDM) acetabular components were evaluated. For traditional fixed-bearing components, the largest peak stress, 49.5 MPa, was observed with 50° of bone loss and a 28-mm head. The lowest peak stress, 6.3 MPa, occurred with complete bone coverage and a 36-mm head. Peak stress in the MDM construct, 25.1 MPa, concentrated in the chromium-cobalt portion of the construct. Larger head diameters are associated with decreased stress in the acetabular component when bone loss is present. An MDM construct with a stiff inner liner may decrease overall stress in the acetabular construct, but focally increased stress near the rim of uncovered acetabular components may increase the risk of metal-on-metal corrosion. [Orthopedics. 2021;44(5):280-284.].

Effect of intraoperative treatment options on hip joint stability following total hip arthroplasty

Dislocation remains the leading indication for revision of total hip arthroplasty (THA). The objective of this study was to use a computational model to compare the overall resistance to both anterior and posterior dislocation for the available THA constructs commonly considered by surgeons attempting to produce a stable joint. Patient-specific musculoskeletal models of THA patients performing activities consistent with anterior and posterior dislocation were developed to calculate joint contact forces and joint positions used for simulations of dislocation in a finite element model of the implanted hip that included an experimentally calibrated hip capsule representation. Dislocations were then performed with consideration of offset using +5 and +9 offset, iteratively with three lipped liner variations in jump distance (10°, 15°, and 20° lips), a size 40 head, and a dual-mobility construct. Dislocation resistance was quantified as the moment required to dislocate the hip and the integral of the moment-flexion angle (dislocation energy). Increasing head diameter increased resistive moment on average for anterior and posterior dislocation by 22% relative to a neutral configuration. A lipped liner resulted in increases in the resistive moment to posterior dislocation of 9%, 19%, and 47% for 10°, 15°, and 20° lips, a sensitivity of approximately 2.8 Nm/mm of additional jump distance. A dual-mobility acetabular design resulted in an average 38% increase in resistive moment and 92% increase in dislocation energy for anterior and posterior dislocation. A quantitative understanding of tradeoffs in the dislocation risk inherent to THA construct options is valuable in supporting surgical decision making.

Heating of Hip Arthroplasty Implants During Metal Artifact Reduction MRI at 1.5- and 3.0-T Field Strengths.

The aim of this study was to quantify the spatial temperature rises that occur during 1.5- and 3.0-T magnetic resonance imaging (MRI) of different types of hip arthroplasty implants using different metal artifact reduction techniques. Using a prospective in vitro study design, we evaluated the spatial temperature rises of 4 different total hip arthroplasty constructs using clinical metal artifact reduction techniques including high-bandwidth turbo spin echo (HBW-TSE), slice encoding for metal artifact correction (SEMAC), and compressed sensing SEMAC at 1.5 and 3.0 T. Each MRI protocol included 6 pulse sequences, with imaging planes, parameters, and coverage identical to those in patients. Implants were immersed in standard American Society for Testing and Materials phantoms, and fiber optic sensors were used for temperature measurement. Effects of field strength, radiofrequency pulse polarization at 3.0 T, pulse protocol, and gradient coil switching on heating were assessed using nonparametric Friedman and Wilcoxon signed-rank tests. Across all implant constructs and MRI protocols, the maximum heating at any single point reached 13.1°C at 1.5 T and 1.9°C at 3.0 T. The temperature rises at 3.0 T were similar to that of background in the absence of implants (P = 1). Higher temperature rises occurred at 1.5 T compared with 3.0 T (P < 0.0001), and circular compared with elliptical radiofrequency pulse polarization (P < 0.0001). Compressed sensing SEMAC generated equal or lower degrees of heating compared with HBW-TSE at both field strengths (P < 0.0001). Magnetic resonance imaging of commonly used total hip arthroplasty implants is associated with variable degrees of periprosthetic tissue heating. In the absence of any perfusion effects, the maximum temperature rises fall within the physiological range at 3.0 T and within the supraphysiologic range at 1.5 T. However, with the simulation of tissue perfusion effects, the heating at 1.5 T also reduces to the upper physiologic range. Compressed sensing SEMAC metal artifact reduction MRI is not associated with higher degrees of heating than the HBW-TSE technique.

Impact of alignment and kinematic variation on resistive moment and dislocation propensity for THA with lipped and neutral liners.

Instability and dislocation remain leading indications for revision of total hip arthroplasty (THA). Many studies have addressed the links between implant design and dislocation; however, an understanding of the impact of alignment and kinematic variability on constraint of modern THA constructs to provide joint stability is needed. The objective of this study is to provide objective data to be considered in the treatment algorithm to protect against joint instability. Joint contact and muscle forces were evaluated using musculoskeletal models of THA patients performing activities consistent with posterior and anterior dislocation. Position and joint loads were transferred to a finite element simulation with an experimentally calibrated hip capsule representation, where they were kinematically extrapolated until impingement and eventual dislocation. Cup anteversion and inclination were varied according to clinical measurements, and variation in imposed kinematics was included. The resistive moment provided by the contact force and joint capsule, and overall dislocation rate (dislocations/total simulations) were determined with neutral and lipped acetabular liners. Use of a lipped liner did increase the resistive moment in posterior dislocation, by an average of 5.2 Nm, and the flexion angle at dislocation by 1.4° compared to a neutral liner. There was a reduction in similar magnitude in resistance to anterior dislocation. Increased cup anteversion and inclination, hip abduction and internal rotation all reduced the occurrence of posterior dislocation but increased anterior dislocation. A quantitative understanding of tradeoffs in the dislocation risk inherent to THA construct options is valuable in supporting surgical decision making.

Specimen-Specific Finite Element Models for Predicting Fretting Wear in Total Hip Arthroplasty Tapers.

Products from fretting wear and corrosion in the taper junction of total hip arthroplasty (THA) devices can lead to adverse local tissue reactions. Predicting damage as a function of design parameters would aid in the development of more robust devices. The objectives of this study were to develop an automated method for identifying areas of fretting wear on THA taper junctions, and to assess the predictive ability of a finite element model to simulate fretting wear in THA taper junctions. THA constructs were fatigue loaded, thus inducing damage on the stem taper. An automated imaging and analysis algorithm quantified fretting wear on the taper surfaces. Specimen-specific finite element models were used to calculate fretting work done (FWD) at the taper junction. Simulated FWD was correlated to imaged fretting wear. Results showed that the automated imaging approach identified fretting wear on the taper surface. Additionally, finite element models showed the greatest predictive ability for tapers exhibiting distal contact. Finite element models predicted an average of 30.3% of imaged fretting wear. With additional validation, the imaging and finite element techniques may be useful to manufacturers and regulators in the development and review of new THA devices.

Dual-mobility components obviate the need for constrained liners in revision total hip arthroplasty—Opposes

Presently, there are multiple options for prevention and treatment of hip dislocation in the revision setting. These include large head prostheses, tripolar constructs, dual mobility liners, and constrained liners. In spite of having better options than 10–15 years ago, revision for total hip arthroplasty constructs that have recurrently dislocated remain in the 15–20% failure range. Especially with cases of deficient abductor hip muscles and marked joint laxity, it is imperative that constrained liners remain in the surgeon׳s armamentaria at the time of revision surgery.

Outcomes of total hip arthroplasty in patients with osteonecrosis of the femoral head-a current review.

The purpose of this review was to analyze (1) patient-reported outcomes and implant survivorship of osteonecrosis (ON) patients following total hip arthroplasty (THA), (2) if prior hip-preserving procedures influence these outcomes, (3) if resurfacing procedures alter outcomes; and (4) how these outcomes may have been impacted by the choice of different bearing surfaces. Today, with implant innovations such as cementless constructs, ceramic bearing surfaces, and highly cross-linked polyethylene, ON patients derive great benefit and have high survivorship following THA. Most studies have shown that previous hip-preserving procedures do not have a deleterious effect on outcomes. Literature on the use of ceramic and highly cross-linked polyethylene bearing surfaces have shown that these implant designs are useful in younger and more active patients. Future research should evaluate the long-term outcomes and survivorship of these new THA constructs.

Four- to Six-year Follow-up of Primary THA Using Contemporary Titanium Tapered Stems

Tapered cementless femoral components have been used in total hip arthroplasty constructs for more than 20 years. In the past 5 to 10 years, these stems have gained popularity in the United States. The purpose of this study was to evaluate the results of the authors’ initial experience using a contemporary tapered, proximally porous-coated, titanium femoral component at 4 to 6 years of follow-up. Eighty-eight patients underwent 100 total hip arthroplasties using the Summit stem (DePuy, Warsaw, Indiana) and a cementless acetabular component. Average age at the time of surgery was 61.6 years. Patients were prospectively followed for 4 to 6 years or until death. Patients were evaluated clinically using Harris Hip Scores and the need for revision. Radiographs were evaluated for femoral loosening and osteolysis. At final follow-up, no hips had been revised for femoral or acetabular loosening. Two hips required revision for dislocation and 1 for early femoral fracture. Bony ingrowth was seen in all but 2 femoral components. There was 1 instance of proximal femoral osteolysis and none distally on radiographs (cross-linked polyethylene was used in 73% of cases). There were 2 cases of severe stress shielding. One percent of cases had an early fracture (too tight) and 1% subsided without ingrowth (too loose). One patient reported significant thigh pain that did not limit activity. At final follow-up, the Summit femoral component demonstrated durable results at 4 to 6 years. Stability of the implant without femoral fracture is paramount.

Impingement and stability of total hip arthroplasty versus femoral head resurfacing using a cadaveric robotics model

We identified and compared the impingent-free range of motion (ROM) and subluxation potential for native hip, femoral head resurfacing (FHR), and total hip arthroplasty (THA). These constructs were also compared both with and without soft tissue to elucidate the role of the soft tissue. Five fresh-frozen bilateral hip specimens were mounted to a six-degree of freedom robotic manipulator. Under load-control parameters, in vivo mechanics were recreated to evaluate impingement free ROM, and the subluxation potential in two "at risk" positions for native hip, FHR, and THA. Impingement-free ROM of the skeletonized THA was greater than FHR for the anterior subluxation position. For skeletonized posterior subluxations, stability for THA and FHR constructs were similar, while a different pattern was observed for specimens with soft tissues intact. FHR constructs were more stable than THA constructs for both anterior and posterior subluxations. When the femoral neck is intact the joint has an earlier impingement profile placing the hip at risk for subluxation. However, FHR design was shown to be more stable than THA only when soft tissues were intact.

Arthroscopic Capsulotomy, Capsular Repair, and Capsular Plication of the Hip: Relation to Atraumatic Instability

The purpose of this systematic review was to critically evaluate the available literature exploring the role of the hip joint capsule in the normal state (stable) and pathologic states (instability or stiffness). Furthermore, we examined the various ways that arthroscopic hip surgeons address the capsule intraoperatively: (1) capsulotomy or capsulectomy without closure, (2) capsulotomy with closure, and (3) capsular plication. Two independent reviewers (B.D.G. and B.G.D.) performed a systematic review of the literature using PubMed and the reference lists of related articles by means of defined search terms. Relevant studies were included if these criteria were met: (1) written in English, (2) Levels of Evidence I to V, (3) focus on capsule and its role in hip stability, and (4) human studies and reviews. Articles were excluded if they evaluated (1) total hip arthroplasty constructs using bony procedures or prosthetic revision, (2) developmental dysplasia of the hip where reorientation osteotomies were used, (3) syndromic instability, and (4) traumatic instability with associated bony injury. By use of the search method described, 5,085 publications were reviewed, of which 47 met appropriate criteria for inclusion in this review. Within this selection group, there were multiple publications that specifically addressed more than 1 of the inclusion criteria. Relevant literature was organized into the following areas: (1) capsular anatomy, biomechanics, and physiology; (2) the role of the capsule in total hip arthroplasty stability; (3) the role of the capsule in native hip stability; and (4) atraumatic instability and capsulorrhaphy. As the capsuloligamentous stabilizers of the hip continue to be studied, and their role defined, arthroscopic hip surgeons should become facile with arthroscopic repair or plication techniques to restore proper capsular integrity and tension when indicated. Level IV, systematic review.

Minimum 5-Year Results of Modular Metal-On-Metal Total Hip Arthroplasty

This study reports minimum 5-year results of 95 hips implanted with a Pinnacle (DePuy, Warsaw, Ind) modular metal-on-metal acetabular prosthesis. Clinical scores such as the Harris Hip and Western Ontario and McMaster Universities Arthritis Index revealed excellent clinical outcomes at mean 6-year follow-up. With the use of large-diameter femoral heads, dislocation was rare, occurring in only 1 hip. Moreover, no acetabular and only 3 femoral osteolytic lesions were detected. Kaplan-Meier survivorship at 7 years after arthroplasty was 97.8% for the total hip arthroplasty construct and 100% for the acetabular shell. No unexplained pain or other complication attributable to wear debris or the metal-on-metal articulation was observed. These findings indicate that total hip arthroplasty with this specific modular metal-on-metal bearing performed well in a high-demand population at midterm follow-up.

The Incidence of Femoral Component Version Change in Primary THA Using the S-ROM Femoral Component

Although use of modular femoral components in revision total hip arthroplasty (THA) is widely accepted, many still question the need for modular versatility in primary THA. This study examined a large cohort of primary THA patients implanted with a modular S-ROM femoral component (DePuy Orthopaedics, Warsaw, Indiana) to determine the percentage of hips in which the surgeon changed version of the femoral component to increase the intraoperative stability of the THA construct and/or to maximize hip range of motion without impingement.In a group of 1000 routine, primary THAs, femoral component version was changed in 479 hips (47.9%). This change in rotational position of the femoral stem ranged from 60° retroversion with respect to the position of the sleeve to 80° of anteversion with respect to the sleeve. Ten hips (1%) experienced dislocation within the first 3 postoperative months. There was no difference in the dislocation rate between those patients in which femoral component version was changed versus those in which version was not changed. Statistical analysis showed no correlation between the likelihood of changing stem version and any of the following clinical variables: patient age, sex, diagnosis, or surgeon.The high percentage of straightforward primary THAs in which it was deemed beneficial to change version of the stem combined with the lack of correlation between femoral version change and clinical variables leads us to conclude that the routine use of a stem that allows variable version may be advantageous when compared to a nonmodular stem, as it is not possible to preoperatively determine when changing version will be required.

Cemented Total Hip Replacement Cable Debris and Acetabular Construct Durability

Third-body wear can adversely affect the outcome of total hip arthroplasty by causing increased polyethylene wear, osteolysis, and component loosening. We hypothesized that there would be greater generation and migration of metal debris to the bearing surfaces in hips in which cobalt-chromium cables were used to reattach the osteotomized greater trochanter when compared with hips in which stainless steel wires were used. Between June 1981 and December 1983, 196 consecutive total hip arthroplasties were performed with use of an Iowa stem and a titanium-backed cemented acetabular component, with cobalt-chromium cable trochanteric reattachment. After nineteen to twenty years of follow-up, the patients were evaluated with regard to the depth of head penetration into the polyethylene (as a surrogate for wear), osteolysis, loosening, and the need for revision. The results were compared with those for a series of 304 total hip arthroplasties that were performed by the same surgeon from January 1984 to December 1985 with use of the same components and the same surgical technique, but with stainless steel wire trochanteric reattachment. The two groups had a comparable nineteen to twenty-year follow-up. All living patients (fifty-nine hips in the cable group and ninety-two hips in the wire group) had minimum ten-year follow-up radiographs. The polyethylene wear rate was 0.101 mm/yr for the cable group and 0.082 mm/yr for the wire group (p = 0.039). For the living patients, the rate of revision of the acetabular component because of aseptic loosening was 37.3% (twenty-two hips) for the cable group and 20.7% (nineteen hips) for the wire group (p = 0.025). The rate of acetabular osteolysis was 44% (twenty-six hips) for the cable group and 26% (twenty-four hips) for the wire group (p = 0.022). Kaplan-Meier analysis with revision of the acetabular component because of aseptic loosening as the end point demonstrated survival rates of 73.7% +/- 9% and 83% +/- 7% for the cable and wire groups, respectively, at twenty years (p = 0.03). Because cable trochanteric attachment led to significantly greater polyethylene wear, osteolysis, acetabular loosening, and acetabular revision, presumably due to third-body metallic debris generation in this cemented total hip replacement construct, surgeons should be aware of the deleterious effects of third-body debris and avoid the use of potential debris generators in the total hip arthroplasty construct. If cable is used and fretting is recognized, especially with intra-articular migration of metallic material or nonunion of the greater trochanter, consideration should be given to cable removal.

Second-generation Extensively Porous-coated THA Stems at Minimum 10-year Followup

The relatively high prevalence of thigh pain and stress shielding associated with the AML porous-coated cementless femoral component led to the development of the Prodigy, a femoral component with more extensive porous-coating and a distal polished bullet tip with medial diaphyseal relief to potentially decrease the flexural rigidity. We prospectively evaluated a cohort of 100 consecutive cementless total hip arthroplasties performed using this device. The minimum followup was 10 years (mean, 11.4 years; range, 10-12 years). At 10-year followup, 69 of the 86 patients (82 hips) were living, 14 patients with 15 hips were deceased, and three patients with three hips were lost to followup. No hips required a stem revision. Two patients (two hips) complained of thigh pain. All hips were bone ingrown. Distal tip radiolucencies and osteolysis occurred in 13 hips (17%) and none, respectively. Twenty-one hips (28%) demonstrated moderate or severe stress shielding. Only further followup will determine if this could be a clinical problem or one with revision surgery. These results encourage the authors to continue using second-generation extensively coated stems in their primary total hip arthroplasty constructs.