Total Cobalt Research Articles

Exposure to iodine, essential and non-essential trace element through seaweed consumption in humans

Seaweed consumption has gained popularity due to its nutritional value and potential health benefits. However, concerns regarding the bioaccumulation of several trace elements highlight the need for comprehensive studies on exposure associated with seaweed consumption. To address this gap in knowledge, we carried out a feeding intervention study of three common edible seaweeds (Nori, Kombu, and Wakame) in 11 volunteers, aiming to elucidate the extent of both beneficial and harmful trace element exposure through seaweed consumption in humans. Concentrations of total arsenic, cobalt, copper, cadmium, iodine, molybdenum, selenium, and zinc were measured in urine samples before and following seaweed consumption. Elements concentrations were also measured in the seaweeds provided for the study. Descriptive analysis for each element were conducted and we used quantile g-computation approach to assess the association between the 8-element mixture and seaweed consumption. Differences in urine element concentrations and seaweed consumption were analyzed using generalized estimating equations (GEE). Urinary concentrations of iodine and total arsenic increased after seaweed consumption. When we analyze the 8-element mixture, the largest weight was observed for iodine after Kombu consumption while for total arsenic was observed after Wakame consumption. Similar results were observed when we compared the mean differences between the elements before and after seaweed consumption through the GEE. Seaweed consumption relates with increased urinary iodine and total arsenic concentrations, particularly after Kombu and Wakame consumption.

Evolving cobalt cycle and urban mines in the EU, 1988–2020

Urban mines are vital for resource security and resilience, but the intricacies of their recycling processes are often overlooked. This study uses dynamic Material Flow Analysis to delve into the EU's cobalt cycle from 1988 to 2020, focusing on urban cobalt mining potential. We observed a significant shift in EU cobalt consumption patterns, with the demand for electric vehicle batteries surpassing that for superalloys, thereby positioning batteries as the primary cobalt consumers. Moreover, batteries increasingly dominate the cobalt in-use stock. The recycling process experiences substantial losses, especially in collection and pretreatment stages, reaching up to 87 %. Our findings indicates that urban cobalt mines could account for 57–66 % of the EU's total cobalt consumption, amounting to 166–193 kt in a high scenario. These insights emphasize the changing dynamics of the EU cobalt cycle and the importance of efficient urban cobalt mine management.

Environmental exposure to multiple chemical elements in Peruvian populations: a review of selected studies

Background Population-based exposure assessments for heavy metals and metalloids (by governmental and private institutions) are common in Peru, but most studies generally focus on the analysis of a single chemical element, like lead or mercury, and lack an appropriate reference regarding the health impact on the exposed population. The complex/mixed chemical interactions within the human body have not yet been studied for all long-term health effects. Methods We reviewed laboratory results from five studies, between 2005-2013, that analysed multiple elements (between 13 and 17 chemical elements in each study) in spot urine samples from Peruvian communities considered exposed and not exposed. All laboratory analysis were performed using inductively coupled plasma mass spectrometry (ICP-MS) at the Environmental Health Laboratory Division of the Centers for Disease Control and Prevention (CDC) of the United States. Results Six chemical elements (total arsenic, caesium, cobalt, lead, molybdenum, and thallium) were present in almost all spot urine samples (>98% of participants), evidencing exposure (qualitative assessment). Exposure to other chemical elements like barium, cadmium, tungsten, antimony and uranium, varied among localities, while chemical elements like beryllium and platinum were rarely detected (<3% and <10% of participants, respectively) in spot urine samples. Most geometric means of urine concentration for total arsenic, lead, cadmium and mercury are higher for the Peruvian locations than for national estimates in Canada and the United States, but not in all locations. Conclusion Comparing averages across different populations can be misleading but comparing periodic values from the same population in the future could evidence an exposure trend. Future studies are needed to develop reference levels for exposed Peruvian populations. This study highlights potential health risks from exposure to environmental chemical elements and can be the first step towards understanding and mitigating human exposure to heavy metals and metalloids for known exposed populations in Peru.

Chemical Composition of Sediment in Bernam Catchment, Selangor Malaysia

The main sources of metal pollution are identified and the potential toxicity of dredged materials on agricultural land is estimated by sediment investigations. Here, we investigated chemical composition of sediment in Bernam catchment. Bernam river catchment has been engulfed by certain anthropogenic activities such as urbanization, illicit logging, farming. Serious concerns have been raised by stakeholders and local people because of the level of pollution due to the release of chemicals and sediments into water bodies by these human activities. Chemical composition elements such as Iron, Aluminium, Copper, Total Organic Carbon, Zinc, Potassium, Calcium, Magnesium, Sodium, Chromium, Cobalt, Nikel, Arsenic and Cadmium have been detected in this study. Characterising potential sediment sources by their diagnostic chemical and physical properties and contrasting them with the properties of transported fluvial material are key components of the methodology used to determine the source of the sediment. The methodology focuses on fluvial sampling techniques used in sediment tracing studies and their suitability for various hydrologic and morphologic river conditions. Based on cluster analysis, there are three cluster of group classification in this catchment. From a management standpoint, determining the sediment is essential to putting into practice the right controls to prevent sediment mobilisation and the ensuing siltation of river channels in the sensitive areas.

Prospects of Passenger Vehicles in China to Meet Dual Carbon Goals and Bottleneck of Critical Materials from a Fleet Evolution Perspective

China has pledged to peak its CO2 emissions by 2030 and achieve carbon neutrality by 2060. To meet these goals, China needs to accelerate the electrification of passenger vehicles. However, the rapid development of electric vehicles may impact the supply of critical raw materials, which may hinder the low-carbon transition. Therefore, the impact of vehicle electrification on CO2 emissions and the corresponding bottlenecks in the supply of critical raw materials should be systematically considered. In this study, we developed the China Automotive Fleet CO2 Model (CAFCM) to simulate a mixed-technology passenger vehicle fleet evolution. We further assessed the impact of energy and CO2 emissions and evaluated the demand for critical battery materials. We designed three scenarios with different powertrain type penetration rates to depict the potential uncertainty. The results showed that (1) the CO2 emissions of passenger vehicles in both the operation stage and the fuel cycle can peak before 2030; (2) achieving the dual carbon goals will lead to a rapid increase in the demand for critical raw materials for batteries and lead to potential supply risks, especially for cobalt, with the cumulative demand for cobalt for new energy passenger vehicles in China being 5.7 to 7.3 times larger than China’s total cobalt reserves; and (3) the potential amount of critical material recycled from retired power batteries will rapidly increase but will not be able to substantially alleviate the demand for critical materials before 2035. China’s new energy vehicle promotion policies and key resource supply risks must be systematically coordinated under the dual carbon goals.

Evaluation of physical and chemical characteristics of wastewater and sludge of Zahedan urban wastewater treatment plant for reuse

Following the water shortage in the world, the use of wastewater as a sustainable resource has been considered in large volume. The study conducted to evaluate the physical and chemical characteristics of the wastewater and sludge of the Zahedan urban wastewater treatment plant showed that the wastewater and sludge treatment system of the treatment plant has high efficiency and effectiveness in removing the investigated parameters. The investigated parameters in the effluent included Chemical oxygen demand (COD), Biochemical oxygen demand (BOD), and Total suspended solids (TSS), turbidity, temperature, nitrate, nitrite, phosphate, pH, zinc, cobalt, lead and copper. Also, the investigated parameters in the sludge included Mixed liquor suspended solids (MLSS), Mixed liquor volatile suspended solids (MLVSS), pH, electrical conductivity and heavy metals. The results showed that the average concentration of metals in the treated effluent is Zn > Mn > Cu > Pb > Ni > Cr > Cd ،and Chemical oxygen demand and Biochemical oxygen demand in the effluent of this treatment plant are on average 171 and 44.4 mg/L, respectively, and its discharge in surface water is limited, but it can be applied for agriculture. Also, the purified sludge had the necessary standards and could be used as soil or household fertilizer and compost for agricultural land.

Framing spaces as (il)legitimate: “dirty” cobalt and the (mis)uses of artisanal and small-scale mining sites in south-eastern Democratic Republic of Congo

ABSTRACT As large-scale mining (LSM) companies and other commercial actors capitalise on a demand boom for Congolese cobalt, they have framed artisanal and small-scale mining (ASM) spaces as problematic and illegitimate to make themselves appear “cleaner” than locally legitimate artisanal mining. Firms have emphasised the negative facets of artisanally mined cobalt, characterising their own production as “clean” and problem free. Capitalist actors’ framing of artisanal mining spaces as “illegitimate” or “dirty” is a powerful narrative that produces significant consequences. First, ASM, a minority of total cobalt production, becomes the focus of negative publicity; this framing erases the negative impacts of LSM. In turn, illicit “taxation” by public and private security forces at LSM sites is overlooked despite its systemic, organised nature. Next, the framing obscures the multiple interconnections between ASM and LSM. Finally, the framing of ASM spaces allows capitalist actors to claim these spaces to reshape and “organise” them.

Mobility and Fractionation of Cobalt in Some Calcareous Soils in Iraqi Centre

Pollution is one of the major threats with potential risks to humans, animals and plants, especially pollution with heavy metals, which are characterized by their significant ability to accumulate in environmental systems and induce toxicity to living organisms, even at low concentrations and quantities. This study was conducted on some calcareous soils selected from the province s of Babylon and Diwaniyah. Soil samples were collected from ten sites, five sites from each province , from a depth of 0-30 cm, to determine the concentration of cobalt in its chemical forms (available, bound to calcium carbonate, bound to organic matter and oxides, and residual) and total concentration, in addition to knowing the effect of different soil characteristics on these chemical forms. The results showed that there was a relatively wide range in the total cobalt concentration in the study sites (16.58 - 86.76 mg kg-1), and the percentages of the available chemical phase of the metal ranged from 0.44% - 6.88%, and in the form associated with carbonates from 19.30% - 34.54%, and in the form associated with organic matter and oxides from 28.82% - 55.94%, and in the form associated with the residual fraction from 3.46% - 51.44%. Because the metals in these fractions might dissolve depending on environmental conditions, notably pH values, higher mobility levels of accessible metal ions and those partly bonded to calcium carbonate may suggest environmental contamination and a risk of toxicity in soils.

Impact of cobalt recycling on China's electrification process: Assessing the potential reduction in cobalt demand from battery recycling

China is actively promoting the transition from conventional internal combustion engine vehicles (ICEVs) to electric vehicles (EVs) to achieve its goal of carbon peaking and neutrality. However, this shift will result in a continuous increase in demand for lithium-ion batteries for EVs, leading to a significant rise in demand for cobalt, further exacerbating the risk of cobalt resource supply in China. The study considered three electrification levels, three battery technology routes, two battery capacities, two dynamic battery lifetimes, and two recycling efficiencies, resulting in 36 demand scenarios and 72 recycling scenarios while increasing the precision of the study to the inter-provincial level. The results indicate that China's cobalt demand will be huge, peaking around 2039, with annual demand ranging from 78.29 kt to 359.40 kt, and the current production capacity and reserves are completely inadequate to meet the growing cobalt demand. In some specific scenarios, secondary cobalt demand remains higher than or close to primary cobalt demand between 2035 and 2040, and secondary cobalt demand becomes a significant component affecting total cobalt demand. In terms of recycling, closed-loop recycling can cover 45.1%–59.3% of annual cobalt demand in 2039. With rapid recovery efficiency, cobalt recovery in multiple scenarios can already fully meet primary cobalt demand, and the recovery potential is enormous. Furthermore, adopting low-cobalt battery technology, which extends battery life and reduces battery replacement in EVs, can significantly reduce secondary cobalt demand. At the provincial level, cobalt demand and recycling in China are unevenly distributed, with provinces with high demand for cobalt showing a trend of shifting from inland areas in the northwest to central and eastern coastal areas. In contrast, the areas with the largest recycling volume remain in the north. Therefore, accelerating the promotion of low cobalt and long-life battery technology and improving recycling efficiency can greatly alleviate the cobalt supply risk in China's electrification process. Additionally, specific spatial layouts should be given attention to ensure the sound development of China's EV industry through national coordination so that the double carbon target can be accomplished on time or even ahead of schedule.

Pt-Doped Lanthanum Ferrites as Versatile Electrode Material for Solid Oxide Cells

La0.6Sr0.4Fe0.8Co0.2O3-δ (LSCF) alone or mixed with doped ceria represents the reference air electrode material for IT-SOFC/SOEC, thanks to its intrinsic MIEC nature and unrivaled catalytic activity towards oxygen exchange reactions. Nevertheless, a steep growth in cobalt demand for automotive (EVs) and storage applications is expected in the next decades, and ethical issues related to cobalt mining in politically unstable countries endanger cobalt supply chain [1]. Noble metal doping to a low extent ( ≤ 5% mol) has drawn attention as a valid strategy to provide the parent oxide structure with high catalytic activity [2][3]. Such amounts of platinum-group-metals (PGM) could be profitably harvested from secondary sources, such as spent automotive three-way catalysts (TWCs) [4], rendering their supply less dependent from localized low-grade ores. In particular, due to the tendency of PGM to be easily reduced to the metallic state, PGM-doped perovskites have found application mainly as fuel electrode materials. Noble metal exsolution endows the parent perovskite with finely dispersed nanoparticles firmly anchored to the oxide substrate, that display high catalytic activity and stability [5].Here, platinum-doping on strontium-substituted lanthanum ferrites is explored as an innovative strategy to enhance the parent perovskite catalytic activity both in reducing and oxidizing environment. The ultimate goal is the design of a multi-functional electrode for Reversible Solid Oxide Cells (r-SOCs). La0.6Sr0.4Fe1-xPtxO3-δ, X = 0.005, 0.01, 0.05 (LSFPtX) stoichiometries were successfully synthesized and characterized by means of X-ray Powder Diffraction (XPRD) (Fig. 1), thermogravimetric analysis (TG), oxygen temperature-programmed desorption (O2-TPD) and X-ray photoelectron spectroscopy (XPS). LSFPtX were tested in symmetric cells to evaluate their activity as air electrode materials in terms of polarization resistance vs. temperature and vs. pO2. The rate-limiting steps of oxygen exchange reactions were investigated by means of electrochemical impedance spectroscopy (EIS) fitting experimental data with equivalent circuit (EC) modelling and distribution of relaxation times (DRT). Results were compared both to the undoped (LSF) and to a commercially available state-of-art 20 mol% Co-substituted LSCF. LSFPtX structural evolution is evaluated at different pO2 and in several SOCs operational environments (5%H2/Ar, 100% CO2 and 50% CO2 : 50% CO). B-site exsolution was studied by means of temperature-programmed reduction (H2-TPR) and scanning electron microscopy (FE-SEM) to assess their applicability as fuel electrode materials as well. Finally, LSGM-based symmetric cells were tested as SOFC and CO2-SOEC, evaluating the operational reversibility and the long-term stability.[1] IEA, Total Cobalt Demand by Sector and Scenario, October 2022, pp. 2020–2040.[2] Marcucci, A., Zurlo, F., Sora, I. N., Placidi, E., Casciardi, S., Licoccia, S., & Di Bartolomeo, E. (2019). A redox stable Pd-doped perovskite for SOFC applications. Journal of Materials Chemistry A, 7(10), 5344-5352.[3] Marasi, M., Duranti, L., Luisetto, I., Fabbri, E., Licoccia, S., & Di Bartolomeo, E. (2023). Ru-doped lanthanum ferrite as a stable and versatile electrode for reversible symmetric solid oxide cells (r-SSOCs). Journal of Power Sources, 555, 232399.[4] Karim, S., & Ting, Y. P. (2021). Recycling pathways for platinum group metals from spent automotive catalyst: A review on conventional approaches and bio-processes. Resources, Conservation and Recycling, 170, 105588.[5] Kothari, M., Jeon, Y., Miller, D. N., Pascui, A. E., Kilmartin, J., Wails, D., ... & Irvine, J. T. (2021). Platinum incorporation into titanate perovskites to deliver emergent active and stable platinum nanoparticles. Nature Chemistry, 13(7), 677-682. Figure 1

China, the Democratic Republic of the Congo, and artisanal cobalt mining from 2000 through 2020

From 2000 through 2020, demand for cobalt to manufacture batteries grew 26-fold. Eighty-two percent of this growth occurred in China and China's cobalt refinery production increased 78-fold. Diminished industrial cobalt mine production in the early-to-mid 2000s led many Chinese companies to purchase ores from artisanal cobalt miners in the Democratic Republic of the Congo (DRC), many of whom have been found to be children. Despite extensive research on artisanal cobalt mining, fundamental questions about its production remain unanswered. This gap is addressed here by estimating artisanal cobalt production, processing, and trade. The results show that, while total DRC cobalt mine production grew from 11,000 metric tons (t) in 2000 to 98,000 t in 2020, artisanal production only grew from 1,000 to 2,000 t in 2000 to 9,000 to 11,000 t in 2020 (with a peak of 17,000 to 21,000 t in 2018). Artisanal production's share of world and DRC cobalt mine production peaked around 2008 at 18 to 23% and 40 to 53%, respectively, before trending down to 6 to 8% and 9 to 11% in 2020, respectively. Artisanal production was chiefly exported to China or processed within the DRC by Chinese firms. An average of 72 to 79% of artisanal production was processed at facilities within the DRC from 2016 through 2020. As such, these facilities may be potential monitoring points for artisanal production and its downstream consumers. This finding may help to support responsible sourcing initiatives and better address abuses related to artisanal cobalt mining by focusing local efforts at the artisanal processing facilities through which most artisanal cobalt production flows.

P126 RADIOTHERAPY AND THE HEART: IN SEARCH OF ARIANNA‘S THREAD

Abstract Background Radiation therapy (RT) is widely diffused in the treatment of cancer; but it could lead to various negative consequences on the cardiovascular system, even several years after treatment end. They include also valvular heart diseases, arrythmias, coronary artery diseases, heart failure, pericardial diseases, systemic and pulmonary artery diseases. We report an interesting case about RT cardiotoxicity different manifestation occurred in the same patient. Case report: 79 years old patient, history of previous testicular seminoma when he was 54 years old (1997), treated through surgery and RT with betatron (total body cobalt). In 2008 aortic valve replacement with mechanical prothesis; in 2017 first hospitalization for heart failure during atrial fibrillation. In subsequent years, recurring episodes of atrial fibrillation (2 unsuccessful attempts at electrical cardioversion), and heart failure exacerbations with mild reduced ejection fraction, treated through medical therapy improvement. At follow–up echocardiogram (03/19) finding of ejection fraction mild reduced (45%), right sections increased in volumes, tricuspid valve moderate regurgitation. In January 2022, at the last cardiac check–up, he reported worsening dyspnoeic symptoms, and occasional episodes of retrosternal pain in last months. It was performed Coro–TC observing a 60% stenosis at distal tract of right coronary; in addition, patient underwent a transoesophageal echocardiogram which documented further reduction in left ventricle ejection fraction, and worsening tricuspid regurgitation to a severe degree, with anulus dilatation and partial failure of leaflets coaptation, which appeared fibro–elastic; inferior vena cava ectasia, Paps 40–45 mmHg circa. Holter–ECG showed atrial fibrillation for all 24 hours, plus 2000 BEV. The case was discussed in Heart Team, and an indication was placed for Triclip intervention. Discussion Nowadays great achievements of anticancer therapies improved patients’ survival, consequently increased the number of anticancer therapies complications; therefore, an accurate cardiac screening for early diagnosis and effective treatment of CV adverse effects is necessary. Several distinct factors contribute to determine the onset cardiotoxicity insurgence, such as the type of cancer, its anatomical localization; radiation techniques applied, total and fractional radiation doses; patient’s age and his comorbidity and risk factors for cardiovascular diseases.

Determination of possible microRNA-markers of cobalt abuse by real-time qPCR using hypoxia signaling pathway panels

Objectives. Cobalt mimics the state of hypoxia to prevent degradation of the alpha subunit of hypoxia-inducible factor, resulting in an increase in blood oxygen capacity and endurance. Athletes can use this property to gain competitive advantage. Nowadays, direct methods of inductively coupled plasma mass spectrometry and liquid chromatography-tandem mass spectrometry are used to determine total cobalt levels in the body. However, the World Anti-Doping Agency is yet to establish a maximum allowable threshold concentration of this element in biofluids. The lack of clear identification criteria complicates the interpretation of the obtained results for the purposes of doping control. In this regard, the present work proposes a new approach for the indirect determination of possible cobalt abuse based on changes in the expression levels of miRNAs involved in the regulation of hypoxia signaling pathways. Here, the aim is to identify possible microRNA markers whose expression does not depend on exercise-induced hypoxia, but changes markedly when taking cobalt preparations.Methods. MicroRNA isolation was performed from blood plasma samples using the PAXgene Blood miRNA Kit. Quantitative real-time polymerase chain reaction (PCR) was performed on CFX96 Bio-Rad (USA) analyzer using miScript® SYBR® Green PCR Kits and panels for studying the expression profiles of mature microRNAs of the hypoxia signaling pathway miScript® miRNA PCR Array.Results. Based on the statistical analysis of the data, it was found that the expression of hsa-miR-15b-5p in the blood plasma of the subjects does not depend on physical activity, but increases when taking cobalt preparations.Conclusions. The difference in expression levels during anaerobic exercise-induced hypoxia and cobalt-induced hypoxia makes hsa-miR-15b-5p a potential candidate to be a marker of erythropoiesis-stimulating agent abuse.

Robust polystyrene resin-supported nano-CoFe2O4 mediated peroxymonosulfate activation for efficient oxidation of 1-hydroxyethane 1,1-diphosphonic acid.

Nanosized spinel cobalt ferrite (CoFe2O4) shows high performance in peroxymonosulfate (PMS) activation for decontamination in water, but is yet challenged by the easily leached Co(II) with high toxicity. Herein, macroporous polystyrene resin is used as the support to improve the stability of CoFe2O4 nanoparticles during PMS activation. CoFe2O4@S201 exerted high catalytic activity toward PMS activation for oxidation of 1-hydroxyethane 1,1-diphosphonic acid (HEDP), with the apparent rate normalized by Co content 38.2 times higher than that of the unsupported CoFe2O4. Meanwhile, one order of magnitude lower Co leaching (< 2.1μgL-1) was detected during the catalytic oxidation. The Co(II)-PMS complex was the primary oxidant responsible for the oxidation of HEDP. The catalytic durability and stability of CoFe2O4@S201 for degradation of HEDP in actual wastewater were systematically evaluated in both batch and continuous-flow mode. It is found that the organic resin, which is often considered to be intolerant to oxidation, is rather stable during the non-radical process. The total cobalt leaching of the fresh CoFe2O4@S201 cannot be ignored in the 100-h continuous-flow run. In contrast, much lower cobalt leaching and slightly higher oxidation efficiency were observed for the regenerated CoFe2O4@S201, which might be due to the removal of unreactive and unstable Co sites on the surface in the first trial. The findings shed light on the potential of organic supports for improving the stability and activity of nanosized CoFe2O4 and other nano-catalysts toward practical application.

Levels of Metals and Microbial Biomass in Cobalt Coleman Mine Tailings (Canada) Three Decades after Land Reclamation

Investigations of restored metal contaminated tailings in Canada with regard to their long-term ability to sustain plant and associated microbiological populations are limited. The specific objectives of the present study were to assess (1) The current levels of total and bioavailable metals and (2) Microbial biomass in Cobalt Coleman mine tailings reclaimed in 1990. The level of microbial biomass was determined using Phospholipid Fatty Acid analysis (PLFA). Metal analysis revealed that the concentration of total Arsenic (As) was >100 and 20 ´ higher in the Nipissing tailing compared to the non-tailing site and the Cart Lake tailing. The same trend was observed to a lesser degree for total Cobalt (Co) and Copper (Cu) concentrations. Overall, the total metal levels remain high >30 years after phytoremediation, but the bioavailable metal amount was low. This suggests that soil metal impacts on biota are minimal. The reclaimed tailing exhibited significantly lower levels (p≤0.05) of organic matter compared to non-tailing reference areas. More importantly, the analyses revealed significantly high (p≤0.05) total microbial biomass in non-tailing soil samples (with higher organic matter content) compared to tailing soils. A strong positive correlation (r = 0.87) was observed between organic matter and total microbial biomass. In contrast to other studies, the pH of the two tailing sites was neutral (7.1 and 7.5) and negatively correlated (r = -95) with bacterial and fungal abundance. Bacteria dominated the microbial communities in all the sites including the non-tailing area, indicating that the targeted region is still under severe environmental stress. Overall, the metal levels in the targeted tailings remain high and the phytoremediation did not improve significantly the soil quality (organic matter, microbial biomass) over the last three decades.

Ecological and human health risk assessment of metals in soils and wheat along Sutlej river (India)

Heavy metal (HMs) entry into soil affects the food chain, which is of great worry for human well-being hazards. In order to study the association of HMs in soil-plant system, surface (0–0.15 m) soil and wheat grain samples were collected within five km buffer zone of Sutlej river in Punjab (India). These samples were analysed for total arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), cobalt (Co), iron (Fe), manganese (Mn), nickle (Ni), lead (Pb), and zinc (Zn). Among all the HMs in soil and grain samples, the concentration of total Fe was maximum and As was minimum. The HM contamination of soils was assessed using contamination factor (CF), enrichment factor (EF), potential ecological risk (Er) and modified potential ecological risk (mEr). The CF, EF, Er and mEr were highest for Cd in soils. The bioaccumulation metal factor was highest for Zn and lowest for Ni in wheat grain. There was a significant (p < 0.05) positive relationship between HM concentration in soils and wheat grains indicating the health risk due to consumption of wheat cultivated around the five km buffer of the Sutlej river. The carcinogenic and non-carcinogenic risk due to ingestion of wheat grain were higher from Cd and Pb, respectively. These results are helpful for devising the remediation approaches to decrease the multi-metal contamination in soils and plants, and the epidemiological ways to preclude the human health risk from HM contamination.

Cementless metal-on-metal versus ceramic-on-polyethylene hip arthroplasty in under-50 year-olds with 20 to 22 years’ follow-up: Was it a good idea to abandon the small-diameter metal-on-metal bearing?

In 2005 and 2011, we reported results for a comparative study of two types of 28-mm bearing (metal-on-metal (MoM) and ceramic-on-polyethylene (CoP) in active patients with respectively 5 and 12 years’ follow-up. The present report is an update at a mean 20 years’ follow-up, addressing 2 issues: (1) implant survival at a mean 20 years; and (2) long-term complications with the metal-on-metal bearing. Twenty-eight millimeters MoM bearings show good survival at 20 years in young active subjects. Two groups of cementless hip prostheses were compared: Metasul™ 28mm MoM versus 28mm CoP. The MoM group comprised 30 patients (39 hips), with a mean age of 40±6.7 years [range, 22.6–49 years], and the CoP group comprised 32 patients (39 hips), with a mean age of 40.5±8.7 years [range, 15–50 years]. The groups were matched in 2005 for age, activity level and preoperative Harris score. At a mean 20±5.3 years’ follow-up [range, 5–23 years], in the MoM group 2 hips (5%) showed limited non-progressive acetabular osteolysis, not requiring revision surgery; in the CoP group, there were 21 revision procedures (54%), including 15 for polyethylene wear. In the MoM group, the median total blood cobalt concentration was 1.03g/L [range, 0.3–3.5] and the median chromium concentration was 1.07g/L [range, 0.3–3.2]. Twenty-year all-cause survival was 100% in the MoM group, and 46% (95% CI, 37–59%) in the CoP group (p<0.0001). At long-term follow-up, MoM implants showed better survival than CoP implants in a young active population. Level of evidence: III, matched case series.

Exploring potential opportunities for the efficient development of the cobalt industry in China by quantitatively tracking cobalt flows during the entire life cycle from 2000 to 2021.

Owing to its key role in high-tech industry and clean energy technology, cobalt has been regarded as a critical material in many countries. In this paper, material flow analysis was used to quantitatively track cobalt material flows in China throughout the entire life cycle from 2000 to 2021. Based on data pertaining to cobalt commodity trade, cobalt loss during raw material processing, and recovered cobalt, we analysed the actual cobalt consumption in China. During the study period from 2000 to 2021, the main findings were as follows: (1) China's cobalt raw material imports accounted for 84.7% of the total raw materials acquired, while the export of cobalt-containing end products amounted to 32.6% of the total production. (2) China's cumulative net import of all cobalt commodities reached 561kt, and battery products accounted for 73.3% of the total cobalt consumption. (3) China recovered 77kt of cobalt from end-of-life products, while 327kt of cobalt was not recovered. (4) The cumulative cobalt loss during raw material processing reached 288kt, with the highest loss occurring in refining (51.0%), followed by manufacturing and fabrication (26.5%), beneficiation (12.3%), and ore mining (10.2%). The overall utilization efficiency of cobalt was 73.8% throughout the entire life cycle. (5) China's actual cobalt consumption reached 497kt, accounting for 51.9% of the apparent cobalt consumption. Moreover, 61.1% of the cobalt products produced in China was consumed domestically, while 38.9% was exported. The massive export of cobalt commodities resulted in China bearing a disproportionate responsibility for carbon emission reduction. The research results can provide a scientific reference for the reasonable adjustment of the trade structure of cobalt commodities and realization of the economic and efficient utilization of cobalt resources in China.

Evaluation of feeding ruminal-protected folate and cobalt pectinate on growth performance, carcass characteristics and plasma vitamin B12 and folate status in finishing beef steers.

A large pen feedlot study was conducted to evaluate the response of yearling steers fed novel sources of rumen-protected folate (RPFA) and cobalt (cobalt pectinate; Co-PECT) on plasma levels of vitamin B12 and folate, growth performance, and carcass characteristics. A total of 2,100 steers (initial BW = 381 ± 45.2 kg.) were enrolled in the study at the time of randomization with 2,091 steers started on treatment diets following the transition to the finishing diet. A generalized randomized block design with sampling error (GRBD) with two treatments and 15 pen replications per treatment (5 blocks × 6 pens/block; 30 pens total with 70 steers/pen) were evaluated with pen serving as the experimental unit. A control (CON) treatment consisted of the standard finishing diet while the test diet consisted of the standard finishing diet providing 3.0 mg ∙ kg−1 DM of RPFA and 1.0 mg ∙ kg−1 DM total supplemental cobalt with approximately half coming from Co-PECT (TEST). Blood samples were collected from 60 randomly selected steers at study initiation and prior to shipping for plasma B12 and folate measurement. Data were analyzed with the model including fixed effects of treatment, block, and treatment within block interaction. Live growth performance was not affected by treatment; however, carcass-adjusted performance and hot carcass weight were numerically improved by TEST in 3 of the 5 blocks (treatment × within block interaction, P ≤ 0.03) of cattle. Plasma levels for both folic acid and vitamin B12 were extremely low at study initiation and increased over the course of the feeding period. Feeding TEST increased (P < 0.01) plasma B12 levels compared to CON by the completion of the trial; however, mean levels would still be considered marginal. Plasma folate was lower (P < 0.05) in TEST steers at the beginning of the study, with no difference between treatments by the time cattle were shipped. Results suggested that cattle coming into the feedlot may be of low or marginal status in both plasma folate and vitamin B12. While the status of folate and B12 improved in both CON and TEST with days on feed, providing RPFA and Co-PECT further helped improve vitamin B12 status; although, overall levels remained low, which may have affected the overall response to RPFA. Additional research is required to better understand the role of B vitamin supplementation for growing-finishing feedlots and develop methods for assessing the status and improving potential responses.

Cobalt nanoparticles embedded in porous N-doped carbon support as a superior catalyst for the p-nitrophenol reduction

We report the synthesis of a new effective cobalt-based composite for catalytic reduction of water pollutant - p-nitrophenol. ZIF-67 and its Zn-substituted analog have been used as precursors for the catalyst preparation. Their pyrolysis has resulted in cobalt nanoparticles embedded into N-doped carbon substrates. We have used polyvinylidene fluoride (PVDF) as an additive to ZIF-substrates to produce mesoporous carbon shells on the surface of the catalysts. We have found that PVDF-additive enhanced the catalytic properties of the obtained composite material. Firstly, this additive reduces the total cobalt concentration in the composite by increasing carbon content. Secondly, a porous carbon shell improves the rate of catalytic reactions. According to the experimental data, PVDF additive has allowed us to obtain materials with lower Co-content but with high catalytic activity towards p-nitrophenol reduction.