Top Quark Pair Production Cross Research Articles

First measurement of the top quark pair production cross section in proton-proton collisions at sqrt{s} = 13.6 TeV

The first measurement of the top quark pair ( textrm{t}overline{textrm{t}} ) production cross section in proton-proton collisions at sqrt{s} = 13.6 TeV is presented. Data recorded with the CMS detector at the CERN LHC in Summer 2022, corresponding to an integrated luminosity of 1.21 fb−1, are analyzed. Events are selected with one or two charged leptons (electrons or muons) and additional jets. A maximum likelihood fit is performed in event categories defined by the number and flavors of the leptons, the number of jets, and the number of jets identified as originating from b quarks. An inclusive textrm{t}overline{textrm{t}} production cross section of 881 ± 23 (stat + syst) ± 20 (lumi) pb is measured, in agreement with the standard model prediction of {924}_{-40}^{+32} pb.

Measurement of the inclusive mathrm{t}overline{mathrm{t}} production cross section in proton-proton collisions at sqrt{s} = 5.02 TeV

The top quark pair production cross section is measured in proton-proton collisions at a center-of-mass energy of 5.02 TeV. The data were collected in a special LHC low-energy and low-intensity run in 2017, and correspond to an integrated luminosity of 302 pb−1. The measurement is performed using events with one electron and one muon of opposite charge, and at least two jets. The measured cross section is 60.7 ± 5.0 (stat) ± 2.8 (syst) ± 1.1 (lumi) pb. A combination with the result in the single lepton + jets channel, based on data collected in 2015 at the same center-of-mass energy and corresponding to an integrated luminosity of 27.4 pb−1, is then performed. The resulting measured value is 63.0 ± 4.1 (stat) ± 3.0 (syst+lumi) pb, in agreement with the standard model prediction of {66.8}_{-3.1}^{+2.9} pb.

Recent top quark measurements with the CMS experiment

Latest results on top quark pair and single top quark production cross sections (inclusive and differential) are presented using proton-proton collision data collected by CMS. The results are used to constrain the standard model parameters. For the first time, the third row of the CKM matrix is measured from single top quark events and multidifferential cross sections are used to constrain simultaneously the top quark pole mass, α S , and PDFs. Moreover, recent results on top quark properties, such as mass measurements or constraints on top Yukawa from differential cross sections are also presented.

Signatures of toponium formation in LHC run 2 data

We study reported deviations between observations and theoretical predictions associated with the production of a pair of di-leptonically decaying top quarks at the LHC, and we examine the possibility that they reflect a signal of toponium formation. We investigate the production by gluon fusion of a color-singlet spin-0 toponium $\eta_t$ bound state of a top and anti-top quark, that then decays di-leptonically ($gg\to\eta_t \to \bar\ell \ell b \bar{b} \nu \bar{\nu}$). We find strong correlations favoring the production of di-lepton systems featuring a small angular separation in azimuth and a small invariant mass. Although toponium production only contributes to 0.8% of the total top-quark pair-production cross section at the 13 TeV LHC, there is a possibility that it can account for observed excesses in the narrow edges of phase space. We propose a method to discover toponium formation by `reconstructing' both its top and anti-top quark constituents in the di-lepton channel.

Measurement of differential tt¯ production cross sections using top quarks at large transverse momenta in pp collisions at s=13 TeV

A measurement is reported of differential top quark pair ($\mathrm{t\bar{t}}$) production cross sections, where top quarks are produced at large transverse momenta. The data collected with the CMS detector at the LHC are from pp collisions at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 35.9 fb$^{-1}$. The measurement uses events where at least one top quark decays as t $\to$ Wb $\to$ qq'b and is reconstructed as a large-radius jet with transverse momentum in excess of 400 GeV. The second top quark is required to decay either in a similar way, or leptonically, as inferred from a reconstructed electron or muon, a bottom quark jet, and a missing transverse momentum due to the undetected neutrino. The cross section is extracted as a function of kinematic variables of individual top quarks or of the $\mathrm{t\bar{t}}$ system. The results are presented at the particle level, within a region of phase space close to that of the experimental acceptance, and at the parton level, and are compared to various theoretical models. In both decay channels the observed absolute cross sections are significantly lower than the predictions from theory, while the normalized differential measurements are well described.

Top quark physics with the ATLAS detector: recent highlights

The top quark is the heaviest known fundamental particle. As it is the only quark that decays without hadronisation, it provides the unique opportunity to probe the properties of bare quarks at the Large Hadron Collider (LHC). This article will present highlights of a few recent precision measurements of the top quark using 13 TeV collision data with the ATLAS experiment. Top-quark pair and single top production cross sections, including differential distributions and production in association with bosons, will be presented alongside top quark properties measurements. Measurements of the top-quark mass and searches for rare top decays are also presented.

Measurement of the top quark pair production cross section in dilepton final states containing one \u03c4 lepton in pp collisions at sqrt{s} = 13 TeV

The cross section of top quark pair production is measured in the mathrm{t}overline{mathrm{t}}to left(ell {nu}_{ell}right)left({uptau}_{mathrm{h}}{nu}_{uptau}right)mathrm{b}overline{mathrm{b}} final state, where τh refers to the hadronic decays of the τ lepton, and ℓ is either an electron or a muon. The data sample corresponds to an integrated luminosity of 35.9 fb−1 collected in proton-proton collisions at sqrt{s} = 13 TeV with the CMS detector. The measured cross section is {sigma}_{mathrm{t}overline{mathrm{t}}} = 781 ± 7 (stat) ± 62 (syst) ± 20 (lumi) pb, and the ratio of the partial width Γ(t → τντb) to the total decay width of the top quark is measured to be 0.1050 ± 0.0009 (stat) ± 0.0071 (syst). This is the first measurement of the mathrm{t}overline{mathrm{t}} production cross section in proton-proton collisions at sqrt{s} = 13 TeV that explicitly includes τ leptons. The ratio of the cross sections in the ℓτh and ℓℓ final states yields a value {R}_{ell {uptau}_{mathrm{h}}/mathcal{ll}} = 0.973 ± 0.009 (stat) ± 0.066 (syst), consistent with lepton universality.

Differential top quark pair production at the LHC: Challenges for PDF fits

We present the results of a PDF fit to differential top quark production within the MMHT framework. We in particular consider ATLAS data in the lepton + jet and dilepton channels and CMS data in the lepton + jet channel, at 8 TeV. While the fit quality to the ATLAS dilepton data is good, for the CMS case we see some issues in achieving a good fit quality for certain distributions. However, we focus on the ATLAS lepton + jet data, for which correlations of the statistical and systematic errors are provided across the four relevant distributions for PDF determination, namely p_T^t, M_{tt}, y_t and y_{tt}. We find severe difficulties in fitting these distributions simultaneously, with particular sensitivity to the precise degree of correlation taken between the dominant two-point MC uncertainties in the data. We investigate the effect of some reasonable decorrelation of these uncertainties, finding the impact on the fit quality to be significant and the resultant gluon not negligible. This is in particular found to be larger than the effect of including NNLO QCD and NLO EW corrections in the top quark pair production cross section on the fit, motivating a closer understanding of the physics underlying these errors sources and in particular the uncertainty on the degree of correlation in them.

Proton PDFs constraints from measurements using the ATLAS experiment

High-precision measurements of Standard Model (SM) processes provide information on different aspects contributing to the process, such as parton distribution functions (PDFs), and comparisons with the current precision reached theoretically on the calculations of the cross sections of such processes. This document describes ATLAS measurements, performed at different centre-of-mass energies, of vector boson (W and Z) cross sections and cross-section ratios. It also discusses measurements of ratios of Z-boson and top-quark pair production cross sections, which provide important information on the proton PDFs. Finally, a measurement involving the di-lepton decay channel of top-quark pairs at 8 TeV is presented, because of its direct sensitivity to the gluon PDF.

Measurement of the inclusive mathrm{t}overline{mathrm{t}} cross section in pp collisions at sqrt{s}=5.02 TeV using final states with at least one charged lepton

The top quark pair production cross section left({sigma}_{mathrm{t}overline{mathrm{t}}}right) is measured for the first time in pp collisions at a center-of-mass energy of 5.02 TeV. The data were collected by the CMS experiment at the LHC and correspond to an integrated luminosity of 27.4 pb−1. The measurement is performed by analyzing events with at least one charged lepton. The measured cross section is {sigma}_{mathrm{t}overline{mathrm{t}}} = 69.5 ± 6.1 (stat) ± 5.6 (syst) ± 1.6 (lumi) pb, with a total relative uncertainty of 12%. The result is in agreement with the expectation from the standard model. The impact of the presented measurement on the determination of the gluon distribution function is investigated.

Polarized double-virtual amplitudes for heavy-quark pair production

We present the two-loop virtual amplitudes for heavy-quark pair production in light quark-antiquark annihilation and gluon fusion channels, including full spin and color dependence. We use expansions around kinematical limits and numerical integration to obtain results for the involved master integrals. From these, we determine the renormalised infrared finite remainders of the coefficients of amplitude decompositions in terms of color and spin structures. The remainders are given in form of numerical interpolation grids supported by expansions around the production threshold and the high energy limit. Finally, we provide the spin density matrix, which encodes the heavy-quark spin correlations and is sufficient for phenomenological applications. Our results are necessary for the derivation of top-quark pair production cross sections in hadron collisions in the narrow width approximation with next-to-next-to-leading order accuracy in QCD.

Soft-gluon and Coulomb corrections to hadronic top-quark pair production beyond NNLO

We construct a resummation at partial next-to-next-to-next-to-leading logarithmic accuracy for hadronic top-quark pair production near partonic threshold, including simultaneously soft-gluon and Coulomb corrections, and use this result to obtain approximate next-to-next-to-next-to-leading order predictions for the total top-quark pair-production cross section at the LHC. We generalize a required one-loop potential in non-relativistic QCD to the colour-octet case and estimate the remaining unknown twoloop potentials and three-loop anomalous dimensions. We obtain a moderate correction of 1.5% relative to the next-to-next-to-leading order prediction and observe a reduction of the perturbative uncertainty below ±5%.

Top Quark Production Cross Section Measurements

Measurements of the inclusive and differential cross-sections for top-quark pair and single top production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented at centre-of-mass energies of 8 TeV and 13 TeV.The inclusive measurements reach high precision and are compared to the best available theoretical calculations. These measurements, including results using boosted tops, probe our understanding of top-pair production in the TeV regime. The results are compared to Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations.For the t-channel single top measurement, the single top-quark and anti-top-quark total production cross-sections, their ratio, as well as differential cross sections are also presented. A measurement of the production cross section of a single top quark in association with a W boson, the second largest single-top production mode, is also presented. Finally, measurements of the properties of the Wtb vertex allow to set limits on anomalous couplings. All measurements are compared to state-of-the-art theoretical calculations.

αs from top-quark pair production at hadron colliders

The strong coupling constant αs(MZ) is determined using inclusive top-quark pair production cross section measurements performed at the LHC and at the Tevatron. Individual values of αs(MZ) are extracted from measurements of different experiments at several centre-of-mass energies, using QCD predictions complete in NNLO perturbation theory, supplemented with NNLL approximations to all orders, and suitable sets of parton distribution functions. These values are then combined using a likelyhood-based approach, with special emphasis on a consistent treatment of systemtic uncertainties and their correlations. The final combined result is αs(MZ)=0.1177−0.0036+0.0034.

Top quark measurements at ATLAS

The top quark is the heaviest known fundamental particle. As it is the only quark that decays before it hadronizes, it allows us to probe the properties of bare quarks at the Large Hadron Collider. Highlights of a few recent precision measurements by the ATLAS Collaboration of the top quark using 13 TeV and 8 TeV collision data will be presented: top-quark pair and single top production cross sections including differential distributions will be presented alongside measurements of top-quark properties, including results using boosted top quarks, probe our understanding of top-quark production in the TeV regime. Measurements of the top-quark mass and searches for rare top quark decays are also presented.

Determination of the strong coupling constant alpha _s left( m_Z right) from measurements of the total cross section for top\u2013antitop-quark production

We present a determination of the strong coupling constant alpha _s left( m_Z right) using inclusive top-quark pair production cross section measurements performed at the LHC and at the Tevatron. Following a procedure first applied by the CMS Collaboration, we extract individual values of alpha _s left( m_Z right) from measurements by different experiments at several centre-of-mass energies, using QCD predictions complete in NNLO perturbation theory, supplemented with NNLL approximations to all orders, and suitable sets of parton distribution functions. The determinations are then combined using a likelihood-based approach, where special emphasis is put on a consistent treatment of theoretical uncertainties and of correlations between various sources of systematic uncertainties. Our final combined result is alpha _s left( m_Z right) =0.1177^{+0.0034{}}_{-0.0036{}}.

αs from the top quark pair production cross section

Five measurements of the top quark pair production cross section from hadron colliders are compared with the theoretical prediction (up the next-to-next-to-leading order in QCD) in order to determine the strong coupling constant αs. The determination is performed for several PDF sets. The individual determinations of αs are combined to form a single best estimate using the Best Linear Unbiased Estimate (BLUE) procedure. Preliminary combined results indicate a higher value of αs than that determined in a previous extraction of αs from the top quark pair production cross section.

Measurements of the mathrm{t}overline{mathrm{t}} production cross section in lepton+jets final states in pp collisions at 8 ,text {TeV} and ratio of 8 to 7\xa0,text {TeV} cross sections

A measurement of the top quark pair production (mathrm{t}overline{mathrm{t}} ) cross section in proton–proton collisions at the centre-of-mass energy of 8,text {TeV} is presented using data collected with the CMS detector at the LHC, corresponding to an integrated luminosity of 19.6,text {fb}^{-text {1}}. This analysis is performed in the mathrm{t}overline{mathrm{t}} decay channels with one isolated, high transverse momentum electron or muon and at least four jets, at least one of which is required to be identified as originating from hadronization of a b quark. The calibration of the jet energy scale and the efficiency of b jet identification are determined from data. The measured mathrm{t}overline{mathrm{t}} cross section is 228.5 pm 3.8,text {(stat)} pm 13.7,text {(syst)} pm 6.0,text {(lumi)} text { pb} . This measurement is compared with an analysis of 7,text {TeV} data, corresponding to an integrated luminosity of 5.0,text {fb}^{-text {1}}, to determine the ratio of 8,text {TeV} to 7,text {TeV} cross sections, which is found to be 1.43 pm 0.04,text {(stat)} pm 0.07,text {(syst)} pm 0.05,text {(lumi)} . The measurements are in agreement with QCD predictions up to next-to-next-to-leading order.

Top quark pair production cross section using the ATLAS detector at the LHC

Measurements of the inclusive top quark pair production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented. The measurements are performed requiring one or two electrons or muons in the final state. Various experimental techniques are compared. The most accurate result in obtained requiring opposite sign electrons and muons, achieves a precision of a few percent, and is in good agreement with a recent NNLO+NNLL QCD calculation. In addition, a differential measurement of the top transverse momentum and kinematic properties of the top pair system are presented. This measurement requires one electron or muon in the final state and probes our understanding of top pair production in the TeV regime and is compared to recent Monte Carlo generators and theory calculations.

Measurement of the Top Quark Pair Production Cross Section in Proton-Proton Collisions at √[s]=13 TeV.

The top quark pair production cross section is measured for the first time in proton-proton collisions at sqrt[s]=13 TeV by the CMS experiment at the CERN LHC, using data corresponding to an integrated luminosity of 43 pb^{-1}. The measurement is performed by analyzing events with at least one electron and one muon of opposite charge, and at least two jets. The measured cross section is 746±58(stat)±53(syst)±36(lumi) pb, in agreement with the expectation from the standard model.