Tongue Region Research Articles

Effect of segmental tongue function training on tongue pressure attributes in individuals with dysphagia after receiving radiotherapy for nasopharyngeal carcinoma

ObjectiveThis study aimed to assess the impact of segmental tongue function training on tongue pressure characteristics in nasopharyngeal carcinoma after radiotherapy(NPCR) patients who experience dysphagia. The findings of this research are crucial in understanding the potential benefits of tongue rehabilitation exercises for individuals with NPC patients. Hence, it is essential to explore the effects of this type of training on tongue pressure and its associated characteristics.MethodsA group of eighteen NPCR dysphagia patients underwent a two-week segmental tongue function training. The researchers assessed their tongue motor function by measuring the tongue pressure (P) and endurance time (ET) in three different regions of the tongue-the anterior tongue region (TAR), central tongue region (TCR), and posterior tongue region (TPR). To gather accurate data, a new flexible tongue pressure sensor with 9 measuring sites arranged in a 3 × 3 configuration was used to measure the pressure exerted by the tongue on the palate. The measurements were taken both before and after the segmental tongue function training.ResultsThe segmental tongue function training resulted in significant improvements in tongue pressure for the anterior(PTAR) and central(PTCR) parts of the tongue(P < 0.05). However, there was no significant change in tongue pressure for the posterior(PTPR) part of the tongue(P > 0.05). Additionally, there were no significant differences in the endurance time for each part of the tongue(P > 0.05).ConclusionsSegmental tongue function training improved the PTAR and PTCR in NPCR dysphagia patients within 2 weeks, and the improvement gradually decreased from the anterior part of the tongue to the posterior part of the tongue. Meanwhile, there were no significant differences in PTPR and ET of between each part before and after treatment. This suggests that a longer duration weeks of training may be needed to improve the PTPR and ET in these patients, or alternatively, more targeted training programs could be designed.

Conditioned Pain Modulation Differences in Central and Peripheral Burning Mouth Syndrome (BMS) Patients.

To evaluate conditioned pain modulation (CPM) in burning mouth syndrome (BMS) patients with different pain mechanisms. Twenty BMS patients (52.0 ± 6.8 years, 17 women and 3 men) and age- and gender-matched 22 healthy controls were enrolled in this randomised controlled trial. The patients received an active lingual nerve block (lidocaine) and a placebo injection (saline) randomly with an interval of 1 week in a double-blinded manner. Patients evaluated their pain intensity on a 0- to 10-cm visual analogue scale (VAS) before and after each injection, with or without CPM. Based on the anaesthesia effect, BMS patients were divided into two groups with presumed different pain mechanisms; a 'central subgroup (n = 11)' with pain relief less than 1 cm and 'peripheral subgroup (n = 9)' with pain relief more than 1 cm on the VAS. Mechanical pain threshold (MPT) and wind-up ratio (WUR) were investigated at two oral mucosa regions: the region with most intense symptoms and a control region for the patient group; tongue and buccal region for the control group. CPM was induced by immersing the left hand into cold water. A moderate level of pain (around five on the VAS) was obtained by adjusting the water temperature. MPT and WUR were measured twice for all the participants with and without CPM, which was analysed and presented as relative change in MPT and WUR. Differences between groups were analysed using two-way ANOVA. Differences within group between tests were assessed by paired t-test. At baseline, there were no significant group differences for MPT or WUR between BMS patients and healthy controls (p ≥ 0.156). The mean bath temperature to evoke moderate pain for the BMS group was significantly lower than that for the healthy control group (8.9°C vs. 11.9°C, p = 0.003). The CPM evoked an inhibitory modulation in 18.2%-44.4% of BMS patients, while for the healthy group, the ratio was 68.2%-81.8%. Central BMS patients had smaller CPM effects than healthy participants at the painful site and control site, which indicated a decreased CPM function (p ≤ 0.034). Peripheral BMS patients had lower CPM effects than healthy participants only at the painful site (p = 0.037). The present findings documented impairment of central nociceptive inhibition processing in BMS patients which was more extensive in central BMS than peripheral BMS. These findings add to the suggestion that BMS may a heterogeneous pain condition with at least two different phenotypes.

Experimental investigation on the effect of the rotor-stator matching mode on velocity pulsation in the centrifugal pump with a vaned diffuser

Centrifugal pumps play an indispensable role in nuclear power plants, where severe turbulent pulsations induced by the rotor-stator interference (RSI) can generate a substantial threat to the safe and stable operation of these facilities. In this study, in order to elucidate the effect of the match of rotor and stator blade number on the unsteady velocity pulsation characteristics inside a vaned diffuser centrifugal pump, three different schemes of rotor and stator matching modes were investigated using LDA measurement technology. The findings indicate that the match of rotor and stator blades exerts a substantial influence on the flow field structure inside the pump, leading to significant variations in the velocity maps near the tongue region. By comparing the blade passing frequency amplitudes of the three pumps, with fewer stator blades leading to a rapid increase in blade passing frequency amplitude. This study demonstrates that altering the match of rotor and stator blades can significantly change the RSI effect and alters the velocity distribution within the pump, and consequently changes the unsteady turbulence intensity in the interaction region. The research findings greatly enhance the understanding of velocity pulsation within the pump and provide effective support for mitigating RSI effect.

Stability Study and Strengthening Strategy of Spiral Case-Encased Concrete Structure of Pumped Storage Power Station

With the development of global hydropower, the scale of hydropower stations is increasing, and the operating conditions are becoming more complex, so the stable operation of hydropower stations is very important. The vibration of the turbine unit will cause resonance in the powerhouse, and the structural stability of the powerhouse will be affected. Many scholars pay attention to the stability of the turbine unit operation, and there are few studies on the powerhouse of the hydropower station. Therefore, this paper relies on the Weifang Hydropower Station project to study key issues such as the tensile strength of concrete and how to arrange steel bars to increase the structural stability by changing the material properties through FEA. Three schemes are designed to evaluate the safety of the powerhouse structure when the turbine unit is running through the safety factor. Our findings indicate that the stress variation patterns observed on the inner surface of the powerhouse remain consistent across different operating scenarios. Notably, along the spiral line of the worm section, we observed that the stress levels on the vertical loop line decrease gradually with increasing distance from the inlet. Conversely, stress concentrations arise near the inlet and the tongue. Additionally, it has been noted that the likelihood of concrete cracking increases significantly at the tongue region.

Performance improvement of multi-blade centrifugal fan based on impeller outlet flow control

The impeller of the multi-blade centrifugal fan significantly impacts the fan's internal flow field and aerodynamic performance. To improve the axial flow distribution along the impeller and suppress the blade passage backflow at the impeller outlet of multi-blade centrifugal fans, a method of variable chord length blade design is proposed. Simultaneously, optimization models are established with static pressure and efficiency as objectives. By altering the control points of the Bezier curve, the leading-edge profile of the impeller is optimized. The results indicate that using variable chord length blades can expand the operating range of the multi-blade centrifugal fan. The maximum flow rate improvement reaches 10.6%. Significant enhancements in the aerodynamic efficiency of the multi-blade centrifugal fan are observed at low flow rates, with a maximum improvement of 4.9%. The variable chord length blade design method enables adjustment of the axial flow distribution at the impeller outlet to better match the impeller's flow requirements. This leads to increased outlet flow on both the shroud and hub sides of the impeller, consequently reducing the backflow area on both sides and improving the blade passage backflow phenomenon. Moreover, variable chord length blades facilitate a more uniform circumferential flow distribution at the impeller outlet, reducing the diversion pressure of the volute tongue, mitigating flow separation within the blade passage, weakening the interaction between the impeller and the volute tongue, and lowering energy losses in the impeller–volute tongue regions. Consequently, this enhances the aerodynamic performance of multi-blade centrifugal fans.

Macroscopic and Histological Effects of Polycaprolactone Dermal Filler in the Orofacial Region: A Study in Rats

The objective of our study was to evaluate early and late macroscopic and histological changes associated with the use of polycaprolactone dermal filler (PCL) in the orofacial region. Forty-eight female Wistar rats were divided into the PCL group and the control group. The material was applied to the ventral tongue and submandibular region, and the animals were euthanized at three time points—24 h, and 30 and 90 days. In the PCL group, yellowish nodules were observed on the tongue at all experimental time points. At the 24 h mark, the histological analysis revealed the presence of the PCL and a predominance of lymphocytes, plasma cells, and neutrophils. At 30 and 90 days, macrophages and multinucleated giant cells predominated around the PCL spheres. Collagen density in the dermis was higher in the PCL group when compared to the control at 30 and 90 days. In the submandibular glands, an inflammatory process similar to that observed at other sites was noted, with no alterations in acinar or ductal morphology. The results of this study highlight the effectiveness of PCL as a collagen biostimulator. Nevertheless, the development of nodular lesions on the tongue signals the potential risk of complications in mobile anatomical structures.

Complex dynamical behaviors of a honeybee-mite model in parameter plane

The honeybee has a significant impact on ecosystem stability, biodiversity conservation, and pollinating crops. However, during the past few years, there has been a sharp reduction in both the honeybee population and their colonies. It has been found that the parasitic mite Varroa destructor is responsible for the decline in honeybee colonies around the world, which in turn immensely affects the economic growth of a country. To investigate how the dynamics of a system is influenced by the growth of honeybees and the parasitism of mites, we study a nonlinear honeybee-mite population model in a discrete-time setup. We observe that an increase in the value of the queen’s egg-laying rate drives the system towards chaos. However, chaos can be controlled as well if the parasite attachment effect is increased. The intrinsic dynamical properties of the proposed system are investigated with the simultaneous variation of the queen’s egg-laying rate and the mite’s parasite attachment effect by constructing several largest Lyapunov exponent and isoperiodic diagrams. The investigation reveals the existence of several periodic structures in the quasiperiodic and chaotic regimes of the parameter plane, including Arnold tongues, saddle area, spring area, connected shrimp-shaped structure, and connected saddle area. We also find the appearance of a novel ‘jellyfish’-shaped periodic structure. One of the most fascinating findings of this study is the appearance of Arnold tongues along the inner boundary region of another Arnold tongue. In addition, this work also reveals different types of multistability, e.g., the coexistence of two, three, and even four attractors. What is more interesting is that the current analysis unveils the coexistence of five attractors as well, more specifically, four different periodic attractors coexist with the trivial fixed point attractor, which is quite rare in ecological systems. The structures of the basins of these coexisting attractors are either smooth or very complex in nature. Furthermore, the present study also discloses the fact that variation in the initial condition of the system can significantly change the appearance of the periodic structures in the parameter plane.

The velocity extraction and feature analysis of glacier surface motion in the Gongar region based on multi-source remote sensing data

The movement of glaciers plays a crucial role in environmental and geological processes, significantly influencing the formation and dynamics of ice bodies. This study leverages feature tracking technology to analyze optical and Synthetic Aperture Radar (SAR) remote sensing imagery, specifically GF-1 optical images and GF-3, Sentinel-1 SAR images, captured during the 2020 to 2021 ablation season in Gongar. The aim was to quantify glacier surface velocities and to evaluate the comparative effectiveness of different remote sensing modalities in capturing these dynamics. Our findings indicate a strong consistency in the spatial distribution of glacier surface velocities derived from diverse remote sensing data sources, with high-precision optical imagery (GF-1) yielding the most accurate velocity measurements, followed by Sentinel-1 SAR data. Notably, large glaciers in Gongar exhibited rapid movements, with an average velocity of 0.16 m/d, primarily at elevations between 4,500 and 6,500 m. The fastest velocities were recorded at approximately 4,500 m elevation. Glaciers with inclines ranging from 10° to 60° displayed the highest velocities within the 20°–30° slope range. It was observed that glaciers on the southeast slope moved faster, exhibiting the highest average surface velocity, in contrast to those on the west slope, which moved more slowly. The surface velocity of the ice tongue region of Krayaylak Glacier that the largest glacier in Pamir, was observed to be lower than 0.6 m/d, indicating a slow movement speed. The study also reveals that the effectiveness of different remote sensing data in detecting glacier velocity in Gongar, with high-resolution data more accurately capturing surface velocities in melting areas or those with slower movement. This study underscores the importance of multi-source remote sensing data in understanding glacier dynamics and contributes valuable insights into the mechanisms driving glacier movements.

The South Atlantic Dipole via multichannel singular spectrum analysis

This study analyzes coupled atmosphere–ocean variability in the South Atlantic Ocean. To do so, we characterize the spatio-temporal variability of annual mean sea-surface temperature (SST) and sea-level pressure (SLP) using Multichannel Singular Spectrum Analysis (M-SSA). We applied M-SSA to ERA5 reanalysis data (1959–2022) of South Atlantic SST and SLP, both individually and jointly, and identified a nonlinear trend, as well as two climate oscillations. The leading oscillation, with a period of 13 years, consists of a basin-wide southwest–northeast dipole and is observed both in the individual variables and in the coupled analysis. This mode is reminiscent of the already known South Atlantic Dipole, and it is probably related to the Pacific Decadal Oscillation and to El Niño–Southern Oscillation in the Pacific Ocean. The second oscillation has a 5-year period and also displays a dipolar structure. The main difference between the spatial structure of the decadal, 13-year, and the interannual, 5-year mode is that, in the first one, the SST cold tongue region in the southeast Atlantic’s Cape Basin is included in the pole closer to the equator. Together, these two oscillatory modes, along with the trend, capture almost 40% of the total interannual variability of the SST and SLP fields, and of their co-variability. These results provide further insights into the spatio-temporal evolution of SST and SLP variability in the South Atlantic, in particular as it relates to the South Atlantic Dipole and its predictability.

Research on Internal Flow and Pressure Fluctuation Characteristics of Centrifugal Pumps as Turbines with Different Blade Wrap Angles

The use of pumps as turbines has been gaining more and more attention in recent years. The present work mainly investigates the influence of blade wrap angle on the internal flow and pressure fluctuation characteristics of centrifugal pumps as turbines. Five different wrap angles (35°,45°, 55°, 65°, and 75°) for a forward-curved impeller were numerically analyzed under multiple operating conditions. The accuracy of numerical simulation was validated by experimental results. The results show that maximum efficiency is achieved with a blade wrap angle of 35°, and the highest efficiency flow point gradually decreases as the blade wrap angle increases. It is found by conducting entropy production theory analysis that the high-entropy production rate regions in PATs are concentrated in the volute tongue and impeller blade inlet regions, and that the entropy production rate at the impeller inlet region increases and then decreases as the blade wrap angle decreases. In addition, pressure pulsation was affected not only by dynamic and static interference but also by an irregular vortex around the impeller; its magnitude under Qt is higher than 0.8Qt for blade wrap angles of 55° and 75°. The primary frequency of pressure pulsation within the impeller is the axial frequency fn and its multiples, and the frequency with the largest amplitude is 3fn. The periodicity of vortices is closely related to the periodicity of pressure pulsation. And it is suggested that a PAT with a 35° blade wrap angle is advantageous for improving the stability of a turbine.

Analysis of pressure pulsation in a multi-stage double suction centrifugal pump

Abstract Pressure pulsation is a common phenomenon, which results from different causes. The intenser pressure pulsation occurs in the pump, the severer the damage to the pump. In the paper, with the assistance of detached eddy simulation method, the characteristic of pressure pulsation in the multi-stage double suction centrifugal pump is studied to understanding the internal flow circumstance. The results reveal that the pressure pulsation intensity reaches the maximum at blade trailing edge, which propagates to the tongue region of forward flow channel and double-volute under the low rates. Furthermore, it can be concluded that the pressure pulsation of region with obvious rotor–stator interaction between rotating impeller and stationary volute is generally larger at low flow rates. The pressure pulsation near the suction side of blade trailing edge shows the feature of broadband frequency and with increasing flow rate the bandwidth of broadband decreases drops rapidly except BP1. Due to the influence of the number of impeller blades, the dominant frequency of monitoring points in the inter-stage flow channel and the volute is basically located at a frequency that is twice the blade frequency. Meanwhile, because of the symmetry of the geometric structure of the reverse flow channel, the pressure pulsation curve changes of its internal monitoring points are similar under the same flow rate.

Effect of impeller structure on aerodynamic performance and noise reduction of a small multi-blade centrifugal fan

In this study, the numerical simulation and orthogonal test are combined to study the effects of blade outlet angle, blade inlet angle, and blade number on the centrifugal fan flow characteristics, stress distribution, and noise control. The experimental tests were carried out to confirm the accuracy of the computational model. The computational fluid dynamics (CFD) technology was used to establish 16 groups of impeller models and derive the optimal parameter combination form. The results show that the blade inlet angle and outlet angle have more significant effects on efficiency and flow rate of fans. Among different optimize structures, the A8 fan with an inlet angle of 60°, an outlet angle of 180°, and a blade number of 45, has the best aerodynamic performance, with a 17.4% increase in flow rate, a 3.3% increase in efficiency, a 7.6% reduction in noise and a 23.0% reduction in impeller stress, compared to the original fan. Reasonable adjustment of the inlet and outlet angles greatly improves fluid distribution and suppresses flow separation. Furthermore, the noise can be reduced by lessening the disturbance between the volute tongue and wake flow, so the flow state gets greatly improved at the volute tongue region.

Case Report: Basaloid Squamous Cell Carcinoma of the Tongue: A Case Report

Basaloid squamous cell carcinoma (BSCC) is a rare variant of conventional squamous cell carcinoma (SCC) frequently affecting the upper aerodigestive tract. The hypopharynx, tonsil, supraglottic larynx, tongue (base), and head-neck regions are particularly susceptible to BSCC. Clinically, the presentation of BSCC and conventional SCC is similar, but BSCC has a poorer prognosis. BSCC is distinguished histopathologically by a dimorphic pattern, a distinctive basal cell component paired with a squamous component. However, its similar features to conventional SCC makes it difficult to diagnose. Therefore, histopathology and immunohistochemistry play a crucial role in diagnosing such tumors. Here we present the case of a 70-year-old male diagnosed with BSCC involving the tongue.

Characteristics and mechanism of winter marine heatwaves in the cold tongue region of the South China Sea

Marine Heatwaves (MHWs) are persistent anomalous sea surface temperature warming events that can affect the marine ecological environment and ecosystems. Here, we study the winter MHWs in the cold tongue region of the South China Sea (SCS) from 1982 to 2022. Our results show that the winter MHWs in the cold tongue region have the strongest cumulative intensity in the SCS, exceeding 45°C·day/time. These strong MHWs are due to their high mean intensity and long duration. Significant interannual variations are observed in these MHWs, with extreme MHW events occurring in the El Niño winters of 97/98 and 15/16. By employing a mixed layer heat budget analysis, we reveal that the extreme MHW event in the winter of 97/98 is caused primarily by the surface heat flux term, and secondarily by the vertical entrainment term. While the 15/16 extreme event is caused by a combination of the surface heat flux term, the vertical entrainment term and the horizontal advection term.

ENHANCING TONGUE REGION SEGMENTATION THROUGH SELF-ATTENTION AND TRANSFORMER BASED

As an essential component of traditional Chinese medicine diagnosis, tongue diagnosis has faced limitations in clinical practice due to its subjectivity and reliance on the experience of physicians. Recent advancements in deep learning techniques have opened new possibilities for the automated analysis and diagnosis of tongue images. In this paper, we collected 500 tongue images from various patients. These images were initially preprocessed and annotated, resulting in the dataset used for this experiment. This project is based on the previously proposed segmentation method using Harnessing Self-Attention and Transformer, which is divided into three key stages: feature extraction, feature fusion, and segmentation prediction. By organically combining these three key stages, our tongue region segmentation model is better equipped to handle complex tongue images and provides accurate segmentation results. The segmentation DICE coefficient reaches 0.953, which is of significant importance for the automation and objectivity of tongue diagnosis in traditional Chinese medicine.

Evaluating Anterior and Posterior Oral Tongue Contributions to Pressure Generation: A Comparison Between Regular and Effortful Saliva Swallows.

This study determined the contributions of the anterior and posterior tongue regions in tongue pressure generation during regular saliva swallows (SSs) and effortful swallows (ESs) completed under two different instructions. The association between tongue pressure and perceived effort to swallow was also examined. Forty healthy adults without swallowing disorders participated in this study, divided into two age groups: 20 younger (Mage = 21.95 years, SD = 4.43) and 20 older (Mage = 70.10 years, SD = 4.30). Simultaneous data acquisition involved submental surface electromyography, tongue manometry, and a visual analog scale across swallowing conditions (SS, ES with tongue emphasis, and ES with pharyngeal squeezing). The main outcome measures were tongue pressure during swallowing and perceived effort to swallow. Overall tongue pressure during ESs with tongue emphasis and with pharyngeal squeezing was greater than that during SSs (R2 = .78, p < .001). Moreover, tongue pressure during the ES with tongue emphasis was greater than that during the ES with pharyngeal squeezing (t = 25.63, p < .001). The posterior tongue region generated more pressure during SSs (R2 = .64, p < .001) and the ES with tongue emphasis (R2 = .55, p < .001) than the anterior tongue. Finally, a positive correlation was found between perceived effort and tongue pressure during swallowing (r = .75, 95% CI [0.72, 0.77]). Tongue pressure generation was affected by the type of instruction used to elicit ESs, and the posterior tongue showed relatively greater pressure contributions than the anterior tongue for ESs with tongue emphasis and SSs. Furthermore, age-related declines in pressure generation during swallowing were not evidenced in this study, underscoring the ability of healthy older individuals to appropriately modulate lingual pressure during ESs. Last, our results showed that the visual analog scale is a simple tool for rating swallowing effort during ESs, supporting its potential clinical use to train ESs.

Investigation of radial force in a high-speed miniature pump

A high-speed miniature pump design is put forth for utilization in the aerospace sector, where the pump’s reliability holds critical importance under microgravity operational conditions. This study focuses on a dynamic bearing-equipped miniature centrifugal pump, chosen for its suitability in investigating radial forces. The prototype of the miniature pump is manufactured and tested by experiments at the rotational speed of 10,000r/min. A good agreement is observed between the numerical predictions and the experimental results. The radial force acting on different blade part has been analyzed for several flow rate conditions using the steady state CFD calculation. It has been found that the radial force exerted on the blade trailing edge exit is the main cause of the total radial force for the impeller. Moreover, using the unsteady CFD simulation, the evolution process of the radial force changing for both the direction and the magnitude with respect to the annular position due to the shaft rotation is discussed in details. The pressure pulsation is also monitored in impeller and volute casing. The results show that the amplitude of the unsteady radial force has a strong relationship with the time it takes for the blade trailing edge exit passing the volute tongue region, while the direction of the radial force hardly changes. The findings of this study contribute to facilitating the broader implementation of the high-speed miniature pump across diverse sectors of society.

Comparative histological and ultrastructural features of the tongue of the mallard domestic duck, Anas platyrhynchos f. domestica, Anatidae (Linnaeus, 1758) in different two age stages (post-hatching [P2] and adult female) captured from Egypt.

The domestic duck is classified as a specialist filter-feeder bird living in the water. These birds also use grazing and pecking as terrestrial feeding methods. The tongues of domestic ducks, similar to those of other Anseriformes, exhibit numerous types and shapes of mechanical papillae that serve a number of purposes when collecting food. The current study attempts to describe the morphological characteristics of the tongue as well as the mechanical papillae's development. In addition, the study aims to determine whether the papillae observed post-hatching (P2) exhibit similar morphology to those found in adult female avian species, as well as to investigate the readiness of the tongue to fulfill its feeding function following hatching. The comprehensive examination of lingual mucosa is examined about the structural modifications necessary for this variety of feeding activities. In this study, the tongues of nine young (P2) and adult female were used. The tongue had three distinct parts: the apex, which had a lingual nail on its ventral surface; the body, which exhibits numerous small and large conical papillae on its lateral sides and a lingual prominence in the caudal region; and the root, which is covered with numerous conical papillae of varying sizes. Conical, filiform, and hair-like mechanical papillae, the three types of food filtration apparatus, are present in both stages. The intraoral transfer involves several structures, including the median groove, lingual combs, and the rostral border of the lingual prominence. The rostral border of the lingual prominence is characterized by distinct rows of conical papillae. The histological analysis demonstrated the presence of both keratinized and nonkeratinized epithelium on different tongue regions. The lingual salivary glands in the rostral and caudal lingual salivary glands exhibit a pronounced periodic acid-Schiff-positive reaction. Additionally, the yellow adipose tissue and sensory receptors, namely the Grandry and Herbst corpuscles, which collectively form the bill-tongue organ that monitors the movement of food. These results conclude the presence of microstructural species-specific alterations in specific tongue areas of domestic ducks' lingual mucosa. These modifications are formed by the filtering mechanism and terrestrial feeding mechanisms, such as grazing or pecking. Following hatching, the tongue of the domestic duck undergoes significant development, primarily in preparation for grazing activities. The anatomical and histological structure of the young (P2) tongue exhibited similarities to that of the adult female domestic duck while also displaying certain variations that could potentially be attributed to the bird's habitat and mode of feeding. RESEARCH HIGHLIGHTS: The results of this study concluded that the domestic duck exhibit a complex tongue structure characterized by the arrangement and morphology of its mechanical papillae, the presence of the lingual prominence with distinctive shape and the lingual comb. These features are believed to be adaptations that enable the duck to actively and efficiently filter food particles from water, serving as its primary feeding mechanism. Additionally, the tongue of domestic ducks is specifically adapted to facilitate various terrestrial activities, such as grazing and pecking. This adaptation is achieved through the presence of conical papillae and a lingual nail. These investigations facilitate our comprehension of both the anatomical and histological characteristics of the domestic duck tongue, as well as enhance our understanding of bird adaptations to various feeding mechanisms.

Aspectos clínicos, ultrassonográficos e patológicos da tromboflebite iatrogênica em uma égua - relato de caso

ABSTRACT A 7-year-old quarter horse mare showed swelling of the tongue, head and neck region, dyspnea, and red urine after eight days of administration of intravenous medications by the animal's handler. The horse was referred to the University Veterinary Hospital of the Federal University of Pará and, at the clinical examination, showed apathy, edema in the head, neck, and tongue region, which was slightly cyanotic and with loss of epithelium in the dorsal region. The maxillary, linguofacial and external jugular veins were bilaterally engorged, firm to palpation and with cord-shaped appearance, with extension of the head to the entrance to the thoracic cavity. Ultrasound examination showed a thrombi with a hyperechoic and heterogeneous appearance that completely obstructed the vessel. The horse died five days after entering the Hospital and at necropsy it was observed: maxillary, linguofacial and external jugular veins bilaterally filled with firm, dark red to blackish thrombi; ulcerated areas in the final third of the esophagus and the stomach; lighter areas on the surface of the kidneys and dark areas at the corticomedullary junction. Based on clinical, ultrasonographic and necropsy findings, iatrogenic thrombophlebitis was diagnosed, associated with repeated injections of drugs administered intravenously.

Unsteady Flow Characteristics in a Centrifugal Compressor

Abstract The geometry of the vortex shell significantly affects the non-axisymmetric flow in centrifugal compressors. This study explores the static pressure characteristics of the vortex shell through experimental data and numerical analysis using finite element software. Findings indicate that the vortex tongue region critically influences the cascade structure. At high flow rates (0.40 kg/s), flow field parameters at the blade and vortex shell inlets alter markedly near the tongue side. Conversely, at lower velocities (0.26 kg/s), flow distribution at the blade inlet becomes more uneven, and changes in the inflow angle are more pronounced. Additionally, blade pulsation intensifies at higher velocities, and the jet wake vortex exhibits structural variations at different velocities. High-pressure fluctuations are notably transmitted upwards through the vortex shell, with periodic fluctuations affecting the impeller load. These changes significantly impact the flow field under various operating conditions.