Tissue Culture-treated Plastic Research Articles

Human adipose mesenchymal stromal cells growing into PCL-nHA electrospun scaffolds undergo hypoxia adaptive ultrastructural changes.

Human Adipose-Derived Mesenchymal Stem/Stromal Cells (hAD-MSCs) have great potential for tissue regeneration. Since transplanted hAD-MSCs are likely to be placed in a hypoxic environment, culturing the cells under hypoxic conditions might improve their post-transplantation survival and regenerative performance. The combination of hAD-MSCs and PCL-nHA nanofibers synergically improves the contribution of both components for osteoblast differentiation. In this work, we hypothesized that this biomaterial constitutes a hypoxic environment for hAD-MSCs. We studied the cellular re-arrangement and the subcellular ultrastructure by Transmission Electron Microscopy (TEM) of hAD-MSCs grown into PCL-nHA nanofibers, and we compared them with the same cells grown in two-dimensional cultures, over tissue culture-treated plastic, or glass coverslips. Among the most evident changes, PCL-nHA grown cells showed enlarged mitochondria, and accumulation of glycogen granules, consistent with a hypoxic environment. We observed a 3.5 upregulation (p=0.0379) of Hypoxia Inducible Factor (HIF)-1A gene expression in PCL-nHA grown cells. This work evidences for the first time intra-cellular changes in three-dimensional compared to two-dimensional cultures, which are adaptive responses of the cells to an environment more closely resembling that of the in vivo niche after transplantation, thus PCL-nHA nanofibers are adequate for hAD-MSCs pre-conditioning.

In Vitro Biocompatibility and Degradation Analysis of Mass-Produced Collagen Fibers.

Automation and mass-production are two of the many limitations in the tissue engineering industry. Textile fabrication methods such as electrospinning are used extensively in this field because of the resemblance of the extracellular matrix to the fiber structure. However, electrospinning has many limitations, including the ability to mass-produce, automate, and reproduce products. For this reason, this study evaluates the potential use of a traditional textile method such as spinning. Apart from mass production, these methods are also easy, efficient, and cost-effective. This study uses bovine-derived collagen fibers to create yarns using the traditional ring spinning method. The collagen yarns are proven to be biocompatible. Enzymatic biodegradability was also confirmed for its potential use in vivo. The results of this study prove the safety and efficacy of the material and the fabrication method. The material encourages higher cell proliferation and migration compared to tissue culture-treated plastic plates. The process is not only simple but is also streamlined and replicable, resulting in standardized products that can be reproduced.

Hyaluronan cable formation by ocular trabecular meshwork cells

Hyaluronan (HA) in the ocular trabecular meshwork (TM) is a critical modulator of aqueous humor outflow. Individual HA strands in the pericellular matrix can coalesce to form cable-like structures, which have different functional properties. Here, we investigated HA structural configuration by TM cells in response to various stimuli known to stimulate extracellular matrix (ECM) remodeling. In addition, the effects of HA cable induction on aqueous outflow resistance was determined. Primary TM cell cultures grown on tissue culture-treated plastic were treated for 12–48 h with TNFα, IL-1α, or TGFβ2. TM cells grown on silicone membranes were subject to mechanical stretch, which induces synthesis and activation of ECM proteolytic enzymes. HA structural configuration was investigated by HA binding protein (HAbp) staining and confocal microscopy. HAbp-labeled cables were induced by TNFα, TGFβ2 and mechanical stretch, but not by IL-1α. HA synthase (HAS) gene expression was quantitated by quantitative RT-PCR and HA concentration was measured by ELISA assay. By quantitative RT-PCR, HAS-1, -2, and -3 genes were differentially up-regulated and showed temporal differences in response to each treatment. HA concentration was increased in the media by TNFα, TGFβ2 and IL-1α, but mechanical stretch decreased pericellular HA concentrations. Immunofluorescence and Western immunoblotting were used to investigate the distribution and protein levels of the HA-binding proteins, tumor necrosis factor-stimulated gene-6 (TSG-6) and inter-α-inhibitor (IαI). Western immunoblotting showed that TSG-6 and IαI were increased by TNFα, TGFβ2 and IL-1α, but mechanical stretch reduced their levels. The underlying substrate appears to affect the identity of IαI·TSG-6·HA complexes since different complexes were detected when TM cells were grown on a silicone substrate compared to a rigid plastic surface. Porcine anterior segments were perfused with 10 μg/ml polyinosinic:polycytidylic acid (polyI:C), a potent inducer of HA cables, and outflow rates were monitored for 72 h. PolyI:C had no significant effect on outflow resistance in porcine anterior segments perfused at physiological pressure. Collectively, HAS gene expression, HA concentration and configuration are differentially modified in response to several treatments that induce ECM remodeling in TM cells. In ocular TM cells, our data suggests that the most important determinant of HA cable formation appears to be the ratio of HA chains produced by the different HAS genes. However, the act of rearranging pericellular HA into cable-like structures does not appear to influence aqueous outflow resistance.

Efficient expansion of mouse primary tenocytes using a novel collagen gel culture method

Development of regenerative therapies for damaged tendons remains a great challenge, largely because of lack of information regarding the mechanisms responsible for differentiation of tenocytes. Mouse tenocytes have not been fully characterized owing to the absence of efficient and reproducible methods for their in vitro expansion without losing phenotypic features. The objective of the study was to establish an improved and reliable method for stable primary culture of mouse tenocytes by using collagen gel. Achilles and tail tendon tissues were harvested and embedded in collagen gel. After 10 days of continuous culture, the gel was digested and cells were passaged on tissue culture-treated plastic dishes. Mouse tenocytes cultured in collagen gel exhibited significantly shorter doubling time and higher numbers of proliferation when maintained on the plastic dishes compared with those cultured without using gel. Transmission electron microscopic analyses showed that cultured tenocytes retained some morphological features of tenocytes in tendon tissues, such as cell-cell junctional complex formation, well-developed rough endoplasmic reticulum, and mitochondria in their cytoplasm. mRNA expression of tenocyte markers (tenomodulin, type I collagen, periostin, and scleraxis) was higher in cells cultured in collagen gel than in those cultured in the absence of gel. Our results show that tenocytes cultured using the collagen gel method express typical lineage markers and exhibit improved growth characteristics, thus providing a stable platform for studying molecular mechanisms that control their differentiation.

In vitro osteoblastic differentiation of human mesenchymal stem cells and human dental pulp stem cells on poly‐L‐lysine‐treated titanium‐6‐aluminium‐4‐vanadium

Three-dimensional (3D) titanium-6-aluminium-4-vanadium (Ti6Al4V) is a widely used biomaterial for orthopedic prosthesis and dental implants; thanks to its very high-mechanical strength and resistance to corrosion. Human mesenchymal stem cells (hMSCs) and dental pulp stem cells (hDPSCs) are responsible for bone regeneration following colonization of prosthesis or dental implants. Both hMSCs and hDPSCs have lower ability to colonize this biomaterial in comparison with tissue culture-treated plastic. Both hMSCs and hDPSCs show lack of focal adhesion kinase (FAK) activation when grown on Ti6Al4V. This signal is restored in the presence of poly-L-lysine (poly-L-lys). Poly-L-lys has been used as part of organoapatite or together with zinc and calcium ions. Our results suggest that poly-L-lys alone induces FAK activation through β1-INTEGRIN, because the presence of β1-INTEGRIN blocking antibody avoided FAK autophosphorylation. Presence of poly-L-lys also increases expression of osteoblastic differentiation marker genes in hMSCs and hDPSCs grown on Ti6Al4V.

Preparation of <em>Drosophila</em> S2 cells for Light Microscopy

The ideal experimental system would be cheap and easy to maintain, amenable to a variety of techniques, and would be supported by an extensive literature and genome sequence database. Cultured Drosophila S2 cells, the product of disassociated 20-24 hour old embryos, possess all these properties. Consequently, S2 cells are extremely well-suited for the analysis of cellular processes, including the discovery of the genes encoding the molecular components of the process or mechanism of interest. The features of S2 cells that are most responsible for their utility are the ease with which they are maintained, their exquisite sensitivity to double-stranded (ds)RNA-mediated interference (RNAi), and their tractability to fluorescence microscopy as either live or fixed cells. S2 cells can be grown in a variety of media, including a number of inexpensive, commercially-available, fully-defined, serum-free media. In addition, they grow optimally and quickly at 21-24 degrees C and can be cultured in a variety of containers. Unlike mammalian cells, S2 cells do not require a regulated atmosphere, but instead do well with normal air and can even be maintained in sealed flasks. Complementing the ease of RNAi in S2 cells is the ability to readily analyze experimentally-induced phenotypes by phase or fluorescence microscopy of fixed or live cells. S2 cells grow in culture as a single monolayer but do not display contact inhibition. Instead, cells tend to grow in colonies in dense cultures. At low density, S2 cultures grown on glass or tissue culture-treated plastic are round and loosely-attached. However, the cytology of S2 cells can be greatly improved by inducing them to flatten extensively by briefly culturing them on a surface coated with the lectin, concanavalin A (ConA). S2 cells can also be stably transfected with fluorescently-tagged markers to label structures or organelles of interest in live or fixed cells. Therefore, the usual scenario for the microscopic analysis of cells is this: first, S2 cells (which can possess transgenes to express tagged markers) are treated by RNAi to eliminate a target protein(s). RNAi treatment time can be adjusted to allow for differences in protein turn-over kinetics and to minimize cell trauma/death if the target protein is important for viability. Next, the treated cells are transferred to a dish containing a coverslip pre-coated with conA to induce cells to spread and tightly adhere to the glass. Finally, cells are imaged with the researcher's choice of microscopy modes. S2 cells are particularly good for studies requiring extended visualization of live cells since these cells stay healthy at room temperature and normal atmosphere.

Preparation of <em>Drosophila</em> S2 cells for Light Microscopy

The ideal experimental system would be cheap and easy to maintain, amenable to a variety of techniques, and would be supported by an extensive literature and genome sequence database. Cultured Drosophila S2 cells, the product of disassociated 20-24 hour old embryos1, possess all these properties. Consequently, S2 cells are extremely well-suited for the analysis of cellular processes, including the discovery of the genes encoding the molecular components of the process or mechanism of interest. The features of S2 cells that are most responsible for their utility are the ease with which they are maintained, their exquisite sensitivity to double-stranded (ds)RNA-mediated interference (RNAi), and their tractability to fluorescence microscopy as either live or fixed cells. S2 cells can be grown in a variety of media, including a number of inexpensive, commercially-available, fully-defined, serum-free media2. In addition, they grow optimally and quickly at 21-24°C and can be cultured in a variety of containers. Unlike mammalian cells, S2 cells do not require a regulated atmosphere, but instead do well with normal air and can even be maintained in sealed flasks. Complementing the ease of RNAi in S2 cells is the ability to readily analyze experimentally-induced phenotypes by phase or fluorescence microscopy of fixed or live cells. S2 cells grow in culture as a single monolayer but do not display contact inhibition. Instead, cells tend to grow in colonies in dense cultures. At low density, S2 cultures grown on glass or tissue culture-treated plastic are round and loosely-attached. However, the cytology of S2 cells can be greatly improved by inducing them to flatten extensively by briefly culturing them on a surface coated with the lectin, concanavalin A (ConA)3. S2 cells can also be stably transfected with fluorescently-tagged markers to label structures or organelles of interest in live or fixed cells. Therefore, the usual scenario for the microscopic analysis of cells is this: first, S2 cells (which can possess transgenes to express tagged markers) are treated by RNAi to eliminate a target protein(s). RNAi treatment time can be adjusted to allow for differences in protein turn-over kinetics and to minimize cell trauma/death if the target protein is important for viability. Next, the treated cells are transferred to a dish containing a coverslip pre-coated with conA to induce cells to spread and tightly adhere to the glass. Finally, cells are imaged with the researcher's choice of microscopy modes. S2 cells are particularly good for studies requiring extended visualization of live cells since these cells stay healthy at room temperature and normal atmosphere.

Trans-differentiation of Alveolar Epithelial Type II Cells to Type I Cells Involves Autocrine Signaling by Transforming Growth Factor β1 through the Smad Pathway

Trans-differentiation of Alveolar Epithelial Type II Cells to Type I Cells Involves Autocrine Signaling by Transforming Growth Factor β1 through the Smad Pathway

Comparison of standard surface chemistries for culturing mesenchymal stem cells prior to neural differentiation

A critical element of any stem cell differentiation protocol is the ability to compare its effects relative to an undifferentiated population of the same cells. In an attempt to standardize pre-differentiation conditions of adult derived mesenchymal stem cells prior to neural induction experiments, we asked what is the simplest chemical surface that supports the growth and maintenance of these cells in a pre-differentiation state. Adult bone marrow-derived rat mesenchymal stem cells (BMSCs) were expanded in vitro on Permanox Lab-Tek tissue culture treated plastic (TCP), poly-D-lysine (PDL) coated glass, PDL-laminin-1 coated glass, and untreated glass. TCP provided the best surface for maintaining morphologies generally considered to be undifferentiated, while PDL coated glass and uncoated glass provided the least suitable surfaces. Expansion of BMSCs on PDL-laminin-1 coated glass resulted in expression of nestin, a marker associated with neuronal and other progenitor cells, and therefore may confound experimental results if used as a pre-differentiation surface.

Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications

Polyaniline (PANi), a conductive polymer, was blended with a natural protein, gelatin, and co-electrospun into nanofibers to investigate the potential application of such a blend as conductive scaffold for tissue engineering purposes. Electrospun PANi–contained gelatin fibers were characterized using scanning electron microscopy (SEM), electrical conductivity measurement, mechanical tensile testing, and differential scanning calorimetry (DSC). SEM analysis of the blend fibers containing less than 3% PANi in total weight, revealed uniform fibers with no evidence for phase segregation, as also confirmed by DSC. Our data indicate that with increasing the amount of PANi (from 0 to ∼5% w/w), the average fiber size was reduced from 803±121 nm to 61±13 nm ( p < 0.0 1 ) and the tensile modulus increased from 499±207 MPa to 1384±105 MPa ( p < 0.0 5 ). The results of the DSC study further strengthen our notion that the doping of gelatin with a few % PANi leads to an alteration of the physicochemical properties of gelatin. To test the usefulness of PANi-gelatin blends as a fibrous matrix for supporting cell growth, H9c2 rat cardiac myoblast cells were cultured on fiber-coated glass cover slips. Cell cultures were evaluated in terms of cell proliferation and morphology. Our results indicate that all PANi-gelatin blend fibers supported H9c2 cell attachment and proliferation to a similar degree as the control tissue culture-treated plastic (TCP) and smooth glass substrates. Depending on the concentrations of PANi, the cells initially displayed different morphologies on the fibrous substrates, but after 1week all cultures reached confluence of similar densities and morphology. Taken together these results suggest that PANi-gelatin blend nanofibers might provide a novel conductive material well suited as biocompatible scaffolds for tissue engineering.

Effect of basal lamina of ovarian follicle on T- and L-type Ca(2+) currents in differentiated granulosa cells.

Patch clamp experiments were conducted to study the effects of basal lamina (basement membrane) of chicken ovarian follicle on membrane Ca(2+) currents in differentiated chicken granulosa cells in a homologous system. The whole cell patch clamp technique was used to simultaneously monitor membrane capacitance (an indirect measure of total cell surface area) and currents flowing through voltage-dependent Ca(2+) channels (using Ba(2+) as the charge carrier). Membrane capacitance was smaller in cells incubated on intact basal lamina than in control cells (incubated on tissue culture-treated plastic substratum). Granulosa cells expressed both T- and L-type Ca(2+) currents, and the amplitudes of the currents in cells incubated on intact basal lamina were significantly lower than those of control cells. Also, granulosa cells incubated on intact basal lamina were found to have significantly lower T- or L-type Ca(2+) current densities than control cells. Intact basal lamina that had been stored for 12 mo produced effects on T- and L-type Ca(2+) currents similar to those caused by freshly isolated basal lamina. The basal lamina was solubilized completely in one step and used to coat glass coverslips (uncoated glass coverslips served as controls). Granulosa cells incubated on coverslips precoated with solubilized basal lamina assumed spherical shape similar to those incubated on intact basal lamina. Similar to the observations made for intact basal lamina, the solubilized basal lamina suppressed T- and L-type Ca(2+) currents in the differentiated granulosa cells. Moreover, fibronectin, laminin, and type IV collagen, obtained from commercial sources, attenuated T- and L-type Ca(2+) currents in the differentiated granulosa cells. This interplay between basal lamina and Ca(2+) currents may be one mechanism that subserves the effects of the matrix material on metabolic functions of granulosa cells.

Tissue culture surface characteristics influence the expansion of human bone marrow cells

Human cell therapy applications in tissue engineering, such as the ex vivo production of hematopoietic cells for transplantation, have recently entered the clinic. Although considerable effort has been focused on the development of biological processes to generate therapeutic cells, little has been published on the design and manufacture of devices for implementation of these processes in a robust and reproducible fashion at a clinical scale. In this study, the effect of tissue culture surface chemistry and texture was assessed in human bone marrow (BM) mononuclear cell (MNC) and CD34-enriched cell cultures. Growth and differentiation was assessed by total, progenitor (CFU-GM), stromal (CFU-F), and primitive (LTC-IC) cell output. Tissue culture treated (TCT) plastic significantly increased MNC culture output as compared with non-TCT plastic, whereas CD34-enriched cell cultures gave lower output (than MNC cultures) that was unaffected by TCT plastic. Interestingly, the level of MNC culture output was significantly different on four commercial TCT surfaces, with the best performing surface giving output that was 1.6- to 2.8-fold greater than the worst one. The surface giving the highest output was the best at supporting development of a distinct morphological feature in the adherent layer (i.e. cobblestone area) indicative of primitive cells, and X-ray photoelectron spectroscopy (XPS) was used to characterize this surface. For custom injection molding of culture devices, the use of three different resins resulted in MNC culture output that was equivalent to commercial cultureware controls, whereas CD34-enriched cell cultures were highly sensitive to resins containing additives. When the texture of molded parts was roughened by sandblasting of the tool, MNC culture output was significantly reduced and higher spikes of IL-6 and G-CSF production were observed, presumably due to macrophage activation. In conclusion, the manufacture of BM MNC culture devices for clinical applications was optimized by consideration of plastic resin, surface treatment, and texture of the culture substratum. Although CD34-enriched cells were insensitive to surface treatment, they were considerably more sensitive to biocompatibility issues related to resin selection. The development of robust systems for BM MNC expansion will enable clinical trials designed to test the safety and efficacy of cells produced in this novel tissue engineering application.

Murine macrophage scavenger receptor: in vivo expression and function as receptor for macrophage adhesion in lymphoid and non-lymphoid organs.

Macrophage scavenger receptors are trimeric integral membrane glycoproteins which have been implicated in various macrophage functions including uptake of oxidized lipoprotein and the serum-dependent, divalent cation-independent adhesion of macrophages to tissue culture-treated plastic. In this study we have used a recently defined monoclonal antibody (2F8) which recognizes murine macrophage scavenger receptor, to explore its expression in lymphoid and non-lymphoid organs of the normal adult. Scavenger receptor was detected in the red pulp and marginal zone of normal adult mouse spleen, medulla of the thymus and subcapsular region of lymph nodes. Kupffer cells in the liver, alveolar macrophages in the lung and lamina propria macrophages in the gut all reacted with 2F8 monoclonal antibody. The antigen was not detected on any non-macrophage cells, with the exception of sinusoidal endothelial cells in the liver. In the spleen, lymph node and liver, scavenger receptor antigen expression was associated specifically with phagocytic cells which had taken up colloidal carbon. To examine macrophage adhesion in a context relevant to the interactions occurring within lymphoid and non-lymphoid organs, and the contribution of macrophage scavenger receptor to this adhesion, we designed an assay of macrophage adhesion to frozen tissue sections. Adhesion to most tissues was high and uniform in the absence of any chelating agents. The chelation of Ca2+ and Mg2+ revealed specific patterns of macrophage adhesion in lymphoid and non-lymphoid organs which was completely inhibited by 2F8. The ability of this antibody to block the EDTA-resistant adhesion correlated with tissue expression of the antigen in some tissues. Unlike adhesion to tissue culture-treated plastic, macrophage scavenger receptor-dependent adhesion of macrophages to frozen tissue sections did not exhibit an absolute requirement for exogenous fetal bovine serum indicating the presence of an endogenous ligand for scavenger receptor within the tissues. We propose that macrophage scavenger receptor is a candidate homing or retention molecule for macrophage localization within ligand-rich tissues.

Regulation of alveolar epithelial cell ICAM-1 expression by cell shape and cell-cell interactions

In normal lung, intercellular adhesion molecule 1 (ICAM-1) is expressed at high levels on thin type I alveolar epithelial cells, but is minimally expressed on cuboidal type II cells. ICAM-1 is induced in primary culture on tissue culture-treated plastic as type II cells undergo transition toward a type I cell-like phenotype. We hypothesized that alveolar epithelial cell expression of ICAM-1 might be regulated in part by signals that influence the state of differentiation of these cells. We found that rat type II cells that were cultured as aggregates of cuboidal cells on a hydrated basement membrane gel (Matrigel) or on floating type I collagen gels, expressed markedly less ICAM-1 protein and mRNA compared with cells that had spread on plastic. In contrast, type II cells that had spread as monolayers on dishes coated with basement membrane proteins in planar configuration demonstrated ICAM-1 expression comparable to that of cells on plastic alone. Thus regulation of alveolar epithelial cell expression of this immunologically important adhesion molecule involves complex spatial interactions of the cells with the basement membrane and other epithelial cells.

109 INDUCTION OF DIFFERENTIATION OF A549 HUMAN ALVEOLAR TUMOR CELLS BY BASEMENT MEMBRANE

A 549 tumor cells may be of type II cell origin, but do not synthesize surfactant under normal conditions. We cultured this cell line either on tissue culture-treated plastic or on top of an extracellular matrix, obtained from the Englebreth-Holm-Swarm (EHS) tumor. We found that cells cultured on EHS matrix synthesized surfactant protein A (SP-A) as shown by Western blot and by slot blot hybridization with an SP-A cDNA probe (n=5). Compared to cells cultured on plastic, cells cultured on EHS for 3-5 days also contained a higher percentage of 16:0-16:0 phosphatidylcholine (10 vs. 2 %, n=2) and incorporated more 3H-glycerol into this lipid species (10 vs. 2.8 %, n=2). On EHS matrix, the cells became cuboidal, and formed alveoli-like spherical structures surrounding a closed lumen. Also, cell division rate was reduced on basement membrane-type matrix. These results suggest that culture on basement membrane induces expression of type II pneumocyte-specific properties in human A549 cells. This culture model may allow a better understanding of the mechanisms by which cell-extracellular matrix interactions modulate specific gene expression. Supported by DFG Ste 459/1-1.

Culture and recovery of macrophages and cell lines from tissue culture-treated and -untreated plastic dishes

Macrophages can be separated from other cell types by their ability to readily attach and spread on glass or on plastic surfaces which are treated for optimal growth of cultured cells (tissue culture-treated plastic). To detach macrophages from these surfaces, techniques must be used which require prior preparation of special flasks or vessels, utilize expensive equipment, are time-consuming and almost uniformly require that the macrophages be exposed to various chemicals. We now report that macrophages can be enriched and recovered efficiently after attachment to disposable polystyrene bacteriologic petri dishes simply by gentle scraping with a rubber policeman. In this paper we compare this method to others currently in use in which resident peritoneal cells, peritoneal exudate cells or cells from bone marrow-derived cultures are detached from treated dishes using cold shock, chelating agents and lidocaine. In all studies, advantages were noted when cells were incubated in untreated dishes and detached by gentle scraping. In addition, untreated dishes supported the growth of adherent cell lines IC-21 and L929B and yielded large numbers of cells, with high viability, which were easily harvested.