Time-resolved X-ray Absorption Spectroscopy Research Articles

Tracking Minority Species in Redox Reactions: A Quantitative Combined XAS and Modulation Excitation Study.

Understanding the nature of intermediates/active species in reactions is a major challenge in chemistry. This is because spectator species typically dominate the experimentally derived data and consequently active phase contributions are masked. Transient methods offer a means to bypass this difficulty. In particular, modulation excitation with phase-sensitive detection (ME-PSD) provides a mechanism to distinguish between spectator and reacting species. Herein, modulation excitation (ME) time-resolved (energy dispersive) X-ray absorption spectroscopy, assisted by phase sensitive detection (PSD) analysis, has been applied to the study of a liquid phase process; in this case the classic ferrocyanide/ferricyanide redox couple. Periodic switches of the electrical potential (anodic/cathodic) enabled the use of the ME approach. Structural changes at fractions as low as 2 % of the total number of electroactive species were detected within the X-ray beam probe volume containing ~30 pmol of Fe(II)/Fe(III).

Key Role of Oxidising Species for Water Oxidation on Iridium Oxides Revealed By Time-Resolved Optical and X-Ray Spectroscopies

Iridium oxide is the state-of-the-art electrocatalyst for water oxidation in polymer electrolyte membrane (PEM) electrolysers, crucial for green hydrogen production. Despite its extensive industrial use, the water oxidation mechanism on this metal oxide and the key factors controlling the reaction rate remain unclear. Understanding these controls at a fundamental level on such benchmark metal oxides is vital for designing more active and stable electrocatalysts for water oxidation in PEM electrolysers.In this talk, I will present our research on probing oxygen evolution reaction (OER) relevant species on iridium-based catalysts. This involves a combination of time-resolved operando optical spectroscopy, soft and hard X-ray absorption spectroscopy (XAS), and electrochemical mass spectrometry. Initially, I will discuss the intermediate and catalytically active states of iridium oxides. This is based on correlating optically detected states with oxygen molecular products identified through on-chip electrochemical mass spectrometry. Subsequently, I will demonstrate how we used optical spectroscopy to quantify these states as a function of potential. The nature of these states, including the Ir oxidation state and surface adsorbates on iridium sites, will be elucidated using a combination of time-resolved Ir-L edge XAS, O-K edge XAS, and supported by Density Functional Theory (DFT).With these quantification results of active species for OER, I will compare the intrinsic kinetics of two state-of-the-art iridium oxide structures - amorphous IrOx versus crystalline rutile IrO2.[1] The effect of the electrolyte on the intrinsic activity of iridium oxides will also be discussed.[2] Finally, based on this molecular-level understanding, I will present a modified volcano model for OER catalyst design. This model considers the impact of adsorbate-adsorbate interactions on binding energetics, demonstrating critical design principles for high intrinsic activity OER catalysts.The authors acknowledge the funding support from the Imperial College-Chinese Scholarship Council Studentship and bp-ICAM 92, which made this research possible.[1] Caiwu Liang, Reshma Rao, Karine Svane et al. Unravelling the effects of active site densities and energetics on the water oxidation activity of iridium oxides, 07 March 2023, PREPRINT (Version 1) available at Research Square [https://doi.org/10.21203/rs.3.rs-2605628/v1][2] Caiwu Liang, Yu Katayama, Yemin Tao, Asuka Morinaga, Benjamin Moss, Verónica Celorrio, et al. Role of electrolyte pH on water oxidation for iridium oxides. ChemRxiv. Cambridge: Cambridge Open Engage; 2023

Coupled X-ray Absorption/UV-vis Monitoring of a Prototypical Oscillating Reaction.

Oscillating reactions are among the most intriguing phenomena in chemistry, but many questions on their mechanisms still remain unanswered, due to their intrinsic complexity and to the low sensitivity of the most common spectroscopic techniques toward the reaction brominated species. In this work, we investigate the cerium ion-catalyzed Belousov-Zhabotinsky (BZ) oscillating reaction by means of time-resolved X-ray absorption spectroscopy (XAS), in combination with UV-vis spectroscopy and unsupervised machine learning, multivariate curve resolution, and kinetic analyses. Altogether, we provide new insights into the collective oscillatory behavior of the key brominated species involved in the classical BZ reaction and measure previously unreported oscillations in their concentrations through Br K-edge XAS, while simultaneously tracking the oscillatory Ce4+-to-Ce3+ transformation by coupling XAS with UV-vis spectroscopy. Our work evidences the potential of the XAS technique to investigate the mechanisms of oscillatory chemical systems whose species are often not detectable with conventional experimental methods.

Revealing the structure of the active sites for the electrocatalytic CO2 reduction to CO over Co single atom catalysts using operando XANES and machine learning.

Transition-metal nitrogen-doped carbons (TM-N-C) are emerging as a highly promising catalyst class for several important electrocatalytic processes, including the electrocatalytic CO2 reduction reaction (CO2RR). The unique local environment around the singly dispersed metal site in TM-N-C catalysts is likely to be responsible for their catalytic properties, which differ significantly from those of bulk or nanostructured catalysts. However, the identification of the actual working structure of the main active units in TM-N-C remains a challenging task due to the fluctional, dynamic nature of these catalysts, and scarcity of experimental techniques that could probe the structure of these materials under realistic working conditions. This issue is addressed in this work and the local atomistic and electronic structure of the metal site in a Co-N-C catalyst for CO2RR is investigated by employing time-resolved operando X-ray absorption spectroscopy (XAS) combined with advanced data analysis techniques. This multi-step approach, based on principal component analysis, spectral decomposition and supervised machine learning methods, allows the contributions of several co-existing species in the working Co-N-C catalysts to be decoupled, and their XAS spectra deciphered, paving the way for understanding the CO2RR mechanisms in the Co-N-C catalysts, and further optimization of this class of electrocatalytic systems.

Restructuring of Palladium Nanoparticles during Oxidation by Molecular Oxygen.

An interplay between Pd and PdO and their spatial distribution inside the particles are relevant for numerous catalytic reactions. Using in situ time-resolved X-ray absorption spectroscopy (XAS) supported by theoretical simulations, a mechanistic picture of the structural evolution of 2.3nm palladium nanoparticles upon their exposure to molecular oxygen is provided. XAS analysis revealed the restructuring of the fcc-like palladium surface into the 4-coordinated structure of palladium oxide upon absorption of oxygen from the gas phase and formation of core@shell Pd@PdO structures. The reconstruction starts from the low-coordinated sites at the edges of palladium nanoparticles. Formation of the PdO shell does not affect the average Pd‒Pd coordination numbers, since the decrease of the size of the metallic core is compensated by a more spherical shape of the oxidized nanoparticles due to a weaker interaction with the support. The metallic core is preserved below 200°C even after continuous exposure to oxygen, with its size decreasing insignificantly upon increasing the temperature, while above 200°C, bulk oxidation proceeds. The Pd‒Pd distances in the metallic phase progressively decrease upon increasing the fraction of the Pd oxide due to the alignment of the cell parameters of the two phases.

Influence of oxygen on electrical conductance and local structural properties of BiFeO3 thin films

The effect of oxygen on the electrical conductance and local structural properties of BiFeO3 (BFO) thin films on SiO2/Si substrates grown by RF magnetron sputtering was investigated. The conductivities of BFO were studied in a planar electrode with blue light irradiation. The BFO films grown with oxygen (BFO-O2) show a large conductivity increase, which is 12.66 times more than the BFO grown without oxygen (BFO), and the conductivity change is entirely caused by the BFO thin films. To explain the mechanism of increased electrical conductance, the local structure at the Fe K-edge was investigated by using time-resolved x-ray absorption spectroscopy (TRXAS). The applied voltage and blue light exposure affected the Fe–O bond, while the valence states of Fe atoms in BFO thin films remained unchanged. When the BFO films were irradiated, the bonding distance of the Fe–O bond was deviated, resulting in an oxygen vacancy. These findings imply that BFO thin films with more oxygen components exhibit higher electrical conductivity when exposed to blue light. The results of this research should pave the way for optoelectronic applications to modulate the electrical conductivity driven by oxygen and blue light.

Tracking nuclear motion in single-molecule magnets using femtosecond X-ray absorption spectroscopy

The development of new data storage solutions is crucial for emerging digital technologies. Recently, all-optical magnetic switching has been achieved in dielectrics, proving to be faster than traditional methods. Despite this, single-molecule magnets (SMMs), which are an important class of magnetic materials due to their nanometre size, remain underexplored for ultrafast photomagnetic switching. Herein, we report femtosecond time-resolved K-edge X-ray absorption spectroscopy (TR-XAS) on a Mn(III)-based trinuclear SMM. Exploiting the elemental specificity of XAS, we directly track nuclear dynamics around the metal ions and show that the ultrafast dynamics upon excitation of a crystal-field transition are dominated by a magnetically active Jahn-Teller mode. Our results, supported by simulations, reveal minute bond length changes from 0.01 to 0.05 Å demonstrating the sensitivity of the method. These geometrical changes are discussed in terms of magneto-structural relationships and consequently our results illustrate the importance of TR-XAS for the emerging area of ultrafast molecular magnetism.

Photochemical Formation and Electronic Structure of an Alkane σ-Complex from Time-Resolved Optical and X-ray Absorption Spectroscopy.

C-H bond activation reactions with transition metals typically proceed via the formation of alkane σ-complexes, where an alkane C-H σ-bond binds to the metal. Due to the weak nature of metal-alkane bonds, σ-complexes are challenging to characterize experimentally. Here, we establish the complete pathways of photochemical formation of the model σ-complex Cr(CO)5-alkane from Cr(CO)6 in octane solution and characterize the nature of its metal-ligand bonding interactions. Using femtosecond optical absorption spectroscopy, we find photoinduced CO dissociation from Cr(CO)6 to occur within the 100 fs time resolution of the experiment. Rapid geminate recombination by a fraction of molecules is found to occur with a time constant of 150 fs. The formation of bare Cr(CO)5 in its singlet ground state is followed by complexation of an octane molecule from solution with a time constant of 8.2 ps. Picosecond X-ray absorption spectroscopy at the Cr L-edge and O K-edge provides unique information on the electronic structure of the Cr(CO)5-alkane σ-complex from both the metal and ligand perspectives. Based on clear experimental observables, we find substantial destabilization of the lowest unoccupied molecular orbital upon coordination of the C-H bond to the undercoordinated Cr center in the Cr(CO)5-alkane σ-complex, and we define this as a general, orbital-based descriptor of the metal-alkane bond. Our study demonstrates the value of combining optical and X-ray spectroscopic methods as complementary tools to study the stability and reactivity of alkane σ-complexes in their role as the decisive intermediates in C-H bond activation reactions.

Excited-State Identification of a Nickel-Bipyridine Photocatalyst by Time-Resolved X-ray Absorption Spectroscopy.

Photoassisted catalysis using Ni complexes is an emerging field for cross-coupling reactions in organic synthesis. However, the mechanism by which light enables and enhances the reactivity of these complexes often remains elusive. Although optical techniques have been widely used to study the ground and excited states of photocatalysts, they lack the specificity to interrogate the electronic and structural changes at specific atoms. Herein, we report metal-specific studies using transient Ni L- and K-edge X-ray absorption spectroscopy of a prototypical Ni photocatalyst, (dtbbpy)Ni(o-tol)Cl (dtb = 4,4'-di-tert-butyl, bpy = bipyridine, o-tol = ortho-tolyl), in solution. We unambiguously confirm via direct experimental evidence that the long-lived (∼5 ns) excited state is a tetrahedral metal-centered triplet state. These results demonstrate the power of ultrafast X-ray spectroscopies to unambiguously elucidate the nature of excited states in important transition-metal-based photocatalytic systems.

Probing the Dynamic Landscape: From Static to Time-Resolved X-Ray Absorption Spectroscopy to Investigate Copper Redox Chemistry in Neurodegenerative Disorders.

Copper (Cu), with its ability to exist in various oxidation states, notably Cu(I) and Cu(II), plays a crucial role in diverse biological redox reactions. This includes its involvement in pathways associated with oxidative stress in neurodegenerative disorders such as Alzheimer's disease, Parkinson's disease, and Transmissible Spongiform Encephalopathies. This paper offers an overview of X-ray Absorption Spectroscopy (XAS) studies designed to elucidate the interactions between Cu ions and proteins or peptides associated with these neurodegenerative diseases. The emphasis lies on XAS specificity, revealing the local coordination environment, and on its sensitivity to Cu oxidation states. Furthermore, the paper focuses on XAS applications targeting the characterization of intermediate reaction states and explores the opportunities arising from recent advancements in time-resolved XAS at ultrabright synchrotron and Free Electron Laser radiation sources.

Synchrotron Radiation Based X-ray Absorption Spectroscopy: Fundamentals and Applications in Photocatalysis.

Photocatalysis is one of the most promising green technologies to utilize solar energy for clean energy achievement and environmental governance. There is a knotty problem to rational designing high-performance photocatalyst, which largely depends on an in-depth insight into their structure-activity relationships and complex photocatalytic reaction mechanisms. Synchrotron radiation based X-ray absorption spectroscopy (XAS) is an important characterization method for photocatlayst to offer the element-specific key geometric and electronic structural information at the atomic level, on this basis, time-resolved XAS technique has a huge impact on mechanistic understanding of photochemical reaction owing to their powerful ability to probe, in real-time, the electronic and geometric structures evolution within photocatalysis reactions. This review will focus on the fundamentals of XAS and their applications in photocatalysis. The detailed applications obtained from XAS is described through the following aspects: 1) identifying local structure of photocatalyst; 2) uncovering in situ structure and chemical state evolution during photocatalysis; 3) revealing the photoexcited process. We will provide an in depth understanding on how the XAS method can guide the rational design of highly efficient photocatalyst. Finally, a systematic summary of XAS and related significance is made and the research perspectives are suggested.

Efficient prediction of attosecond two-colour pulses from an X-ray free-electron laser with machine learning

X-ray free-electron lasers are sources of coherent, high-intensity X-rays with numerous applications in ultra-fast measurements and dynamic structural imaging. Due to the stochastic nature of the self-amplified spontaneous emission process and the difficulty in controlling injection of electrons, output pulses exhibit significant noise and limited temporal coherence. Standard measurement techniques used for characterizing two-coloured X-ray pulses are challenging, as they are either invasive or diagnostically expensive. In this work, we employ machine learning methods such as neural networks and decision trees to predict the central photon energies of pairs of attosecond fundamental and second harmonic pulses using parameters that are easily recorded at the high-repetition rate of a single shot. Using real experimental data, we apply a detailed feature analysis on the input parameters while optimizing the training time of the machine learning methods. Our predictive models are able to make predictions of central photon energy for one of the pulses without measuring the other pulse, thereby leveraging the use of the spectrometer without having to extend its detection window. We anticipate applications in X-ray spectroscopy using XFELs, such as in time-resolved X-ray absorption and photoemission spectroscopy, where improved measurement of input spectra will lead to better experimental outcomes.

In-situ and operando Grazing Incidence XAS: a novel set-up and its application to model Pd electrodes for alcohols oxidation

Abstract In this article, we present an in-situ and operando time-resolved X-ray Absorption Spectroscopy (XAS) technique which exploits a combination of Grazing Incidence XAS (GIXAS) and Fixed Energy X-ray Absorption Voltammetry (FEXRAV), the Grazing Incidence FEXRAV (GI-FEXRAV). A case-study is also outlined. Palladium ultra-low loadings were deposited above Au polycrystalline iso-oriented substrates adopting three different deposition methods: surface-controlled electrochemical methods, direct electrodeposition, and physical vapour deposition (PVD). These catalytical surfaces were prepared for the investigation by GI-FEXRAV of the Pd oxidation/dissolution phenomenon that could occur when the metal is used in the anodic compartment of Direct Alcohol Fuel Cells (DAFCs) or in electrochemical reformers. Moreover, we report a robust, low cost and versatile procedure to obtain wide and flat iso-oriented gold substrates that can mimic monocrystalline gold (1 1 1) in the electrochemical response. The use of GI-FEXRAV for the operando characterization of the catalysts, in conjunction with the designed experimental cell and our flexible Au-based electrochemical substrates show an invaluable potential in the operando study of fundamental phenomena in heterogeneous electrocatalysis model systems and, due to its versatility, paves the way to further studies on a wide selection of electrochemical systems.

Facile Synthesis Method of Zeolite NaY and Zeolite NaY-Supported Ni Catalyst with High Catalytic Activity for the Conversion of CO2 to CH4

In this work, the facile reflux method was used as a crystallization procedure for zeolite NaY synthesis. The zeolite mixture was aged for 7 days and then refluxed for crystallization at 100 °C for 12 h. The synthesized zeolite NaY was impregnated with 10, 20 and 30 wt%Ni solution to use as a catalyst for CO2 methanation. The 30 wt% of Ni on the zeolite NaY catalyst showed the highest CO2 methanation catalytic activity, with almost 100% CH4 selectivity. This can be explained by an appropriate H2 and CO2 adsorption amount on a catalyst surface being able to facilitate the surface reaction between them and further react to form products. The oxidation state of Ni and the stability of the catalyst were monitored by time-resolved X-ray absorption spectroscopy. The oxidation state of Ni2+ was reduced during the catalyst reduction prior to the CO2 methanation and it was completely reduced to Ni° at 600 °C. During CO2 methanation, Ni° remained unchanged. In addition, the stability test of the catalyst was conducted by exposing the catalyst to a fluctuating condition (CO2 + H2 and only CO2). The oxidation state of Ni° remained unchanged under the fluctuating condition. This indicated that the Ni/zeolite catalyst has high stability, which can be attributed to an appropriate binding strength between Ni and the zeolite support.

Ultrafast X-ray Absorption Spectroscopy Reveals Excited-State Dynamics of B12 Coenzymes Controlled by the Axial Base.

Polarized time-resolved X-ray absorption spectroscopy at the Co K-edge is used to probe the excited-state dynamics and photolysis of base-off methylcobalamin and the excited-state structure of base-off adenosylcobalamin. For both molecules, the final excited-state minimum shows evidence for an expansion of the cavity around the Co ion by ca. 0.04 to 0.05 Å. The 5-coordinate base-off cob(II)alamin that is formed following photodissociation has a structure similar to that of the 5-coordinate base-on cob(II)alamin, with a ring expansion of 0.03 to 0.04 Å and a contraction of the lower axial bond length relative to that in the 6-coordinate ground state. These data provide insights into the role of the lower axial ligand in modulating the reactivity of B12 coenzymes.

Time-resolved x-ray spectroscopy of nucleobases and their thionated analogs.

The photoinduced relaxation dynamics of nucleobases and their thionated analogs have been investigated extensively over the past decades motivated by their crucial role in organisms and their application in medical and biochemical research and treatment. Most of these studies focused on the spectroscopy of valence electrons and fragmentation. The advent of ultrashort x-ray laser sources such as free-electron lasers, however, opens new opportunities for studying the ultrafast molecular relaxation dynamics utilizing the site- and element-selectivity of x-rays. In this review, we want to summarize ultrafast experiments on thymine and 2-thiouracil performed at free-electron lasers. We performed time-resolved x-ray absorption spectroscopy at the oxygen K-edge after UV excitation of thymine. In addition, we investigated the excited state dynamics of 2-tUra via x-ray photoelectron spectroscopy at sulfur. For these methods, we show a strong sensitivity to the electronic state or charge distribution, respectively. We also performed time-resolved Auger-Meitner spectroscopy, which shows spectral shifts associated with internuclear distances close to the probed site. We discuss the complementary aspects of time-resolved x-ray spectroscopy techniques compared to optical and UV spectroscopy for the investigation of ultrafast relaxation processes.

Reversibly Adapting Configuration in Atomic Catalysts Enables Efficient Oxygen Electroreduction.

Single-atom catalysts (SACs) featuring M-N-C moieties have garnered significant attention as efficient electrocatalysts for the oxygen reduction reaction (ORR). However, the role of the dynamic M-N configuration of SACs induced by the derived frameworks under applied ORR potentials remains poorly understood. Herein, we conduct a comprehensive investigation using multiple operando techniques to assess the dynamic configurations of Cu SACs under various microstructural interface (MSI) regulations by anchoring atomic Cu on g-C3N4 and zeolitic imidazolate framework (ZIF) substrates. Cu SACs supported on g-C3N4 exhibit symmetric Cu-N configurations characterized by a reversibly adaptive nature under operational conditions, which leads to their excellent ORR catalytic activity. In contrast, the Cu-N configuration in ZIF-derived Cu SACs undergoes irreversible structural changes during the ORR process, in which the elongated Cu-N pair is unstable and breaks during the ORR, acting as a competing reaction against the ORR and resulting in high overpotential requirements. Crucially, operando time-resolved X-ray absorption spectroscopy (TR-XAS) and Raman results unequivocally reveal the reversibly adapting properties of the local Cu-N configuration in atomic Cu-anchored g-C3N4, which have been overlooked in numerous literatures. All findings provide valuable insights into the potential-driven characteristics of atomic electrocatalysts during target reactions and offer a systematic approach to study atomic electrocatalysts and their corresponding catalytic behaviors.

Selective Oxidative Dehydrogenation of Ethane and Propane over Copper-Containing Mordenite: Insights into Reaction Mechanism and Product Protection.

Copper(II)-containing mordenite (CuMOR) is capable of activation of C-H bonds in C1 -C3 alkanes, albeit there are remarkable differences between the functionalization of ethane and propane compared to methane. The reaction of ethane and propane with CuMOR results in the formation of ethylene and propylene, while the reaction of methane predominantly yields methanol and dimethyl ether. By combining in situ FTIR and MAS NMR spectroscopies as well as time-resolved Cu K-edge X-ray absorption spectroscopy, the reaction mechanism was derived, which differs significantly for each alkane. The formation of ethylene and propylene proceeds via oxidative dehydrogenation of the corresponding alkanes with selectivity above 95 % for ethane and above 85 % for propane. The formation of stable π-complexes of olefins with CuI sites, formed upon reduction of CuII -oxo species, protects olefins from further oxidation and/or oligomerization. This is different from methane, the activation of which proceeds via oxidative hydroxylation leading to the formation of surface methoxy species bonded to the zeolite framework. Our findings constitute one of the major steps in the direct conversion of alkanes to important commodities and open a novel research direction aiming at the selective synthesis of olefins.

Nonequilibrium warm dense matter investigated with laser-plasma-based XANES down to the femtosecond.

The use of laser-plasma-based x-ray sources is discussed, with a view to carrying out time-resolved x-ray absorption spectroscopy measurements, down to the femtosecond timescale. A review of recent experiments performed by our team is presented. They concern the study of the nonequilibrium transition of metals from solid to the warm dense regime, which imposes specific constraints (the sample being destroyed after each shot). Particular attention is paid to the description of experimental devices and methodologies. Two main types of x-ray sources are compared, respectively, based on the emission of a hot plasma, and on the betatron radiation from relativistic electrons accelerated by laser.

Mapping the Ultrafast Mechanistic Pathways of Co Photocatalysts in Pure Water through Time-resolved X-ray Spectroscopy.

Nanosecond time-resolved X-ray (tr-XAS) and optical transient absorption spectroscopy (OTA) are applied to study 3 multimolecular photocatalytic systems with [Ru(bpy)3]2+photoabsorber, ascorbic acid electron donor and Co catalysts with methylene (1), hydroxomethylene (2) and methyl (3) amine substituents in pure water. OTA and tr-XAS of 1 and 2 show that the favored catalytic pathway involves reductive quenching of the excited photosensitizer and electron transfer to the catalyst to form a CoII square pyramidal intermediate with a bonded aqua molecule followed by a CoI square planar derivative that decays within ~8 µs. By contrast, a CoI square pyramidal intermediate with a longer decay lifetime of ~35µs is formed from an analogous CoII geometry for 3 in H2O. These results highlight the protonation of CoI to form the elusive hydride species to be the rate limiting step and show that the catalytic rate can be enhanced through hydrogen containing pendant amines that act as H-H bond formation proton relays.