Time-resolved Vibrational Spectroscopy Research Articles

Probing the Local Near-Field Intensity of Plasmonic Nanoparticles in the Mid-infrared Spectral Region.

The enhanced local field of gold nanoparticles (AuNPs) in mid-infrared spectral regions is essential for improving the detection sensitivity of vibrational spectroscopy and mediating photochemical reactions. However, it is still challenging to measure its intensity at subnanometer scales. Here, using the NO2 symmetric stretching mode (νNO2) of self-assembled 4-nitrothiophenol (4-NTP) monolayers on AuNPs as a model, we demonstrated that the percentage of excited νNO2 mode, determined by femtosecond time-resolved sum-frequency generation vibrational spectroscopy, allows us to directly detect the local field intensity of the AuNP surface in subnanometer ranges. The local-field intensity is tuned by AuNP diameters. An approximate 17-fold enhancement was observed for the local field on 80 nm AuNPs compared to the Au film. Additionally, the local field can regulate the anharmonicity of the νNO2 mode by synergistic effect with molecular orientation. This work offers a promising approach to probe the local field intensity distribution around plasmonic NP surfaces at subnanometer scales.

Intermolecular Protein-Water Coupling Impedes the Coupling Between the Amide A and Amide I Mode in Interfacial Proteins.

The coupling between different vibrational modes in proteins is essential for chemical dynamics and biological functions and is linked to the propagation of conformational changes and pathways of allosteric communication. However, little is known about the influence of intermolecular protein-H2O coupling on the vibrational coupling between amide A (NH) and amide I (C═O) bands. Here, we investigate the NH/CO coupling strength in various peptides with different secondary structures at the lipid cell membrane/H2O interface using femtosecond time-resolved sum frequency generation vibrational spectroscopy (SFG-VS) in which a femtosecond infrared pump is used to excite the amide A band, and SFG-VS is used to probe transient spectral evolution in the amide A and amide I bands. Our results reveal that the NH/CO coupling strength strongly depends on the bandwidth of the amide I mode and the coupling of proteins with water molecules. A large extent of protein-water coupling significantly reduces the delocalization of the amide I mode along the peptide chain and impedes the NH/CO coupling strength. A large NH/CO coupling strength is found to show a strong correlation with the high energy transfer rate found in the light-harvesting proteins of green sulfur bacteria, which may understand the mechanism of energy transfer through a molecular system and assist in controlling vibrational energy transfer by engineering the molecular structures to achieve high energy transfer efficiency.

Determination of the Thickness of Interfacial Water by Time-Resolved Sum-Frequency Generation Vibrational Spectroscopy.

The physics and chemistry of a charged interface are governed by the structure of the electrical double layer (EDL). Determination of the interfacial water thickness (diw) of the charged interface is crucial to quantitatively describe the EDL structure, but it can be utilized with very scarce experimental methods. Here, we propose and verify that the vibrational relaxation time (T1) of the OH stretching mode at 3200 cm-1, obtained by time-resolved sum frequency generation vibrational spectroscopy with ssp polarizations, provides an effective tool to determine diw. By investigating the T1 values at the SiO2/NaCl solution interface, we established a time-space (T1-diw) relationship. We find that water has a T1 lifetime of ≥0.5 ps for diw ≤ 3 Å, while it displays bulk-like dynamics with T1 ≤ 0.2 ps for diw ≥ 9 Å. T1 decreases as diw increases from ∼3 Å to 9 Å. The hydration water at the DPPG lipid bilayer and LK15β protein interfaces has a thickness of ≥9 Å and shows a bulk-like feature. The time-space relationship will provide a novel tool to pattern the interfacial topography and heterogeneity in Ångstrom-depth resolution by imaging the T1 values.

Special issue on time-resolved vibrational spectroscopy.

Special issue on time-resolved vibrational spectroscopy.

Anomalous transient blueshift in the internal stretch mode of CO/Pd(111)

In time-resolved pump-probe vibrational spectroscopy the internal stretch mode of polar molecules is utilized as a key observable to characterize the ultrafast dynamics of adsorbates on surfaces. The adsorbate nonadiabatic intermode couplings are the commonly accepted mechanisms behind the observed transient frequency shifts. Here, we study the CO/Pd(111) system with a robust theoretical framework that includes electron-hole pair excitations and electron-mediated coupling between the vibrational modes. A mechanism is revealed that screens the electron-phonon interaction and originates a blueshift under ultrafast nonequilibrium conditions. The results are explained in terms of the abrupt change in the density of states around the Fermi level, and are instrumental for understanding the dynamics at multicomponent surfaces involving localized and standard $s$ or $p$ states.

Fluorescence Modulation by Amines: Mechanistic Insights into Twisted Intramolecular Charge Transfer (TICT) and Beyond

Amine groups are common constituents of organic dyes and play important roles in tuning fluorescence properties. In particular, intensive research works have demonstrated the tendency and capabilities of amines in influencing chromophore brightness. Such properties have been explained by multiple mechanisms spanning from twisted intramolecular charge transfer (TICT) to the energy gap law and beyond, which introduce additional nonradiative energy dissipation pathways. In this review, we aim to provide a focused overview of the mechanistic insights mainly for the TICT mechanism, accompanied by a few other less common or influential fluorescence quenching mechanisms in the amine-containing fluorescent molecules. Various aspects of current scientific findings including the rational design and synthesis of organic chromophores, theoretical calculations, steady-state and time-resolved electronic and vibrational spectroscopies are reviewed. These in-depth understandings of how the amine groups with diverse chemical structures at various atomic sites affect excited-state nonradiative decay pathways will facilitate the strategic and targeted development of fluorophores with desired emission properties as versatile chemosensors for broad applications.

Excited-state symmetry breaking in quadrupolar pull-push-pull molecules: dicyanovinyl vs. cyanophenyl acceptors.

A significant number of quadrupolar dyes behave as their dipolar analogues when photoexcited in polar environments. This is due to the occurrence of excited-state symmetry breaking (ES-SB), upon which the electronic excitation, initially distributed over the whole molecule, localises preferentially on one side. Here, we investigate the ES-SB properties of two A-D-A dyes, consisting of a pyrrolo-pyrrole donor (D) and either cyanophenyl or dicyanovinyl acceptors (A). For this, we use time-resolved vibrational spectroscopy, comparing IR absorption and femtosecond stimulated Raman spectroscopies. Although dicyanovinyl is a stronger electron-withdrawing group, ES-SB is not observed with the dicyanovinyl-based dye even in highly polar media, whereas it already takes place in weakly polar solvents with dyes containing cyanophenyl accepting groups. This difference is attributed to the large electronic coupling between the D-A branches in the former dye, whose loss upon symmetry breaking cannot be counterbalanced by a gain in solvation energy. Comparison with analogues of the cyanophenyl-based dye containing different spacers reveals that interbranch coupling does not so much depend on the distance between the D-A subunits than on the nature of the spacer. We show that transient Raman spectra probe different modes of these centrosymmetric molecules but are consistent with the transient IR data. However, lifetime broadening of the Raman bands, probably due to the resonance enhancement, may limit the application of this technique for monitoring ES-SB.

Photophysics of the red-form Kaede chromophore.

The green fluorescent protein (GFP) drove revolutionary progress in bioimaging. Photoconvertible fluorescent proteins (PCFPs) are an important branch of the FP family, of which Kaede is the prototype. Uniquely, PCFPs can be permanently switched from green to red emitting forms on UV irradiation, facilitating applications in site-specific photolabelling and protein tracking. Optimisation and exploitation of FPs requires understanding of the photophysical and photochemical behaviour of the chromophore. Accordingly, the principal GFP chromophore has been the subject of intense experimental and theoretical investigation. In contrast, the photophysics of the red emitting PCFP chromophore are largely unstudied. Here we present a detailed investigation of the excited-state properties of the Kaede chromophore in solution, utilising steady state measurements, ultrafast time-resolved electronic and vibrational spectroscopies, and electronic structure theory. Its excited state dynamics are very different to those of the parent GFP. Most remarkably, the PCFP chromophore has highly complex wavelength-dependent fluorescence decays and a mean lifetime an order of magnitude longer than the GFP chromophore. Transient electronic and vibrational spectroscopies suggest that these dynamics arise from a range of excited-state conformers that are spectrally and kinetically distinct but chemically similar. These conformers are populated directly by excitation of a broad thermal distribution of ground state structures about a single conformer, suggesting an excited-state potential surface with several minima. Temperature-dependence confirms the existence of barriers on the excited-state surface and reveals the radiationless decay mechanism to be internal conversion. These experimental observations are consistent with a model assuming a simple ground state potential energy surface accessing a complex excited state possessing multiple minima.

Dynamics of hydrogen bond reorganization in the S1(ππ*) state of 9-Anthracenecarboxaldehyde

Effect of solvent polarity and hydrogen bonding interaction on the excited state dynamics of 9-Anthracenecarboxaldehyde (9-ACD) have been investigated using steady state and time-resolved electronic and vibrational spectroscopic techniques. Photophysical properties and dynamics of the excited states are seen to be more sensitive to intermolecular hydrogen bonding ability of the solvent, rather than its polarity. FTIR studies reveal formation of complexes with the protic solvents via formation of conventional hydrogen bond at the carbonyl site of 9-ACD molecule. In strong hydrogen bond donating solvents, namely, 2, 2, 2-trifuoroethanol (TFE) and 1, 1, 1, 3, 3, 3-hexafluoroisopropanol (HFIP), nearly all the molecules of 9-ACD in solution remain engaged in complex formation leaving insignificant number of molecules remaining free in solution. In aprotic solvents, the S1 state is short-lived (the lifetime is only a few tens of ps) and intersystem crossing (ISC) is the major deactivation pathway (the triplet yield is near unity). However, in strong hydrogen bond donating solvents, the S1 state lifetime is long (a few ns) because the deactivation pathway for the S1 state via the triplet manifold is blocked. Both the ultrafast time-resolved electronic and vibrational spectroscopy studies in TFE and HFIP reveal that hydrogen bond reorganization process following photoexcitation of the hydrogen bonded complex is the only relaxation process undergone by the S1 state in sub-100 ps time domain. However, the time-resolved IR (TRIR) spectroscopy studies further reveal the possibility of formation of aromatic π- hydrogen bonding and reorganization of the hydrogen bond at this site makes the major contribution towards the S1 state relaxation process in strong hydrogen bond donating solvents.

(Invited) Resolving a Catalytic Mechanism on an Electrode Surface: Using Time Resolution to Identify Theoretical Descriptors

Catalytic mechanisms at electrode surfaces guide the development of electrochemically controlled energy storing reactions and chemical synthesis. The intermediate steps of these mechanisms are challenging to identify experimentally but are critical to understanding the speed, stability, and selectivity of product evolution for a given energy input. One of the most studied reactions is the water-splitting reaction which breaks apart H2O into H2 and O2. In the laboratory group, we employ time-resolved optical and vibrational spectroscopy to deconstruct the energy intensive part, the oxygen evolution reaction (OER), into its component parts. The first step of this oxidative reaction, which is to release a proton and take an electron from water, has often been thought of as a theoretical “descriptor” that differentiates the OER activity of materials: if this is hard to do, then the material is less energy efficient and if it is easy to do, then a later, bond-forming step limits the energy efficiency. Yet, the formation free energy of this step had yet to be measured experimentally. Here, I will begin by summarizing the work done previously by the group: the structure and kinetics of forming these first reaction intermediates (Ti-OH*) by their optical and vibrational signatures upon driving OER with an ultrafast photo-trigger of the electrode surface (SrTiO3). I will then discuss the most recent work, which shows that by separating the reaction steps in time and optically detecting these intermediates created upon hole-transfer from the valence band, we can determine their formation free energy1. In addition to the optical spectroscopy, we employ reaction isotherm methodology borrowed from surface studies of reactions. By tuning the pH, we obtain a Langmuir isotherm on the driven surface (Figure 1) regulated by the proton transfer that increases surface hydroxylation for higher pH prior to photo-triggering OER. From the midpoint of this isotherm, one can obtain the formation free energy of Ti-OH* from valence band holes. Such an application of isotherms is new in that the product is not the final one, for which one generally knows the reaction free energy, but rather an intermediate of a reaction. Overall, the innovation of the work is to utilize kinetic measurements to obtain the calculated free energy of an intermediate reaction step at a material surface. 1I. Vinogradov, S. Singh, H. Lyle, M. Paolino, A. Mandal*, J. Rossmeisl, T. Cuk *, Nature Materials, 2022, 21, 88.Figure 1: The time-resolved optical data as a function of pH show how the population of intermediates generates a reaction isotherm (black trace). The emission (in blue) counts the intermediate Ti-OH* population. Figure 1

Charge Delocalization and Vibronic Couplings in Quadrupolar Squaraine Dyes.

Squaraines are prototypical quadrupolar charge-transfer chromophores that have recently attracted much attention as building blocks for solution-processed photovoltaics, fluorescent probes with large two-photon absorption cross sections, and aggregates with large circular dichroism. Their optical properties are often rationalized in terms of phenomenological essential state models, considering the coupling of two zwitterionic excited states to a neutral ground state. As a result, optical transitions to the lowest S1 excited state are one-photon allowed, whereas the next higher S2 state can only be accessed by two-photon transitions. A further implication of these models is a substantial reduction of vibronic coupling to the ubiquitous high-frequency vinyl-stretching modes of organic materials. Here, we combine time-resolved vibrational spectroscopy, two-dimensional electronic spectroscopy, and quantum-chemical simulations to test and rationalize these predictions for nonaggregated molecules. We find small Huang-Rhys factors below 0.01 for the high-frequency, 1500 cm-1 modes in particular, as well as a noticeable reduction for those of lower frequency modes in general for the electronic S0 → S1 transition. The two-photon allowed state S2 is well separated energetically from S1 and has weak vibronic signatures as well. Thus, the resulting pronounced concentration of the oscillator strength in a narrow region relevant to the lowest electronic transition makes squaraines and their aggregates exceptionally interesting for strong and ultrastrong coupling of excitons to localized light modes in external resonators with chiral properties that can largely be controlled by the molecular architecture.

Time-resolved serial femtosecond crystallography on fatty-acid photodecarboxylase: lessons learned

Upon absorption of a blue-light photon, fatty-acid photodecarboxylase catalyzes the decarboxylation of free fatty acids to form hydrocarbons (for example alkanes or alkenes). The major components of the catalytic mechanism have recently been elucidated by combining static and time-resolved serial femtosecond crystallography (TR-SFX), time-resolved vibrational and electronic spectroscopies, quantum-chemical calculations and site-directed mutagenesis [Sorigué et al. (2021), Science, 372, eabd5687]. The TR-SFX experiments, which were carried out at four different picosecond to microsecond pump-probe delays, yielded input for the calculation of Fourier difference maps that demonstrated light-induced decarboxylation. Here, some of the difficulties encountered during the experiment as well as during data processing are highlighted, in particular regarding space-group assignment, a pump-laser power titration is described and data analysis is extended by structure-factor extrapolation of the TR-SFX data. Structure refinement against extrapolated structure factors reveals a reorientation of the generated hydrocarbon and the formation of a photoproduct close to Cys432 and Arg451. Identification of its chemical nature, CO2 or bicarbonate, was not possible because of the limited data quality, which was assigned to specificities of the crystalline system. Further TR-SFX experiments on a different crystal form are required to identify the photoproducts and their movements during the catalytic cycle.

Time-Resolved Vibrational and Electronic Spectroscopy for Understanding How Charges Drive Metal Oxide Catalysts for Water Oxidation.

Temporally resolved spectroscopy is a powerful approach for gaining detailed mechanistic understanding of water oxidation at robust Earth-abundant metal oxide catalysts for guiding efficiency improvement of solar fuel conversion systems. Beyond detecting and structurally identifying surface intermediates by vibrational and accompanying optical spectroscopy, knowledge of how charges, sequentially delivered to the metal oxide surface, drive the four-electron water oxidation cycle is critical for enhancing catalytic efficiency. Key issues addressed in this Perspective are the experimental requirements for establishing the kinetic relevancy of observed surface species and the discovery of the rate-boosting role of encounters of two or more one-electron surface hole charges, often in the form of randomly hopping metal oxo or oxyl moieties, for accessing very low-barrier O-O bond-forming pathways. Recent spectroscopic breakthroughs of metal oxide photo- and electrocatalysts inspire future research poised to take advantage of new highly sensitive spectroscopic tools and of methods for fast catalysis triggering.

Probing the Dynamics of Low-Overpotential CO2-to-CO Activation on Copper Electrodes with Time-Resolved Raman Spectroscopy.

Oxide-derived copper electrodes have displayed a boost in activity and selectivity toward valuable base chemicals in the electrochemical carbon dioxide reduction reaction (CO2RR), but the exact interplay between the dynamic restructuring of copper oxide electrodes and their activity and selectivity is not fully understood. In this work, we have utilized time-resolved surface-enhanced Raman spectroscopy (TR-SERS) to study the dynamic restructuring of the copper (oxide) electrode surface and the adsorption of reaction intermediates during cyclic voltammetry (CV) and pulsed electrolysis (PE). By coupling the electrochemical data to the spectral features in TR-SERS, we study the dynamic activation of and reactions on the electrode surface and find that CO2 is already activated to carbon monoxide (CO) during PE (10% Faradaic efficiency, 1% under static applied potential) at low overpotentials (−0.35 VRHE). PE at varying cathodic bias on different timescales revealed that stochastic CO is dominant directly after the cathodic bias onset, whereas no CO intermediates were observed after prolonged application of low overpotentials. An increase in cathodic bias (−0.55 VRHE) resulted in the formation of static adsorbed CO intermediates, while the overall contribution of stochastic CO decreased. We attribute the low-overpotential CO2-to-CO activation to a combination of selective Cu(111) facet exposure, partially oxidized surfaces during PE, and the formation of copper-carbonate-hydroxide complex intermediates during the anodic pulses. This work sheds light on the restructuring of oxide-derived copper electrodes and low-overpotential CO formation and highlights the power of the combination of electrochemistry and time-resolved vibrational spectroscopy to elucidate CO2RR mechanisms.

Ultrafast vibrational dynamics of the free OD at the air/water interface: Negligible isotopic dilution effect but large isotope substitution effect.

Vibrational relaxation dynamics of the OH stretch of water at the air/water interface has been a subject of intensive research, facilitated by recent developments in ultrafast interface-selective nonlinear spectroscopy. However, a reliable determination of the vibrational relaxation dynamics in the OD stretch region at the air/D2O interface has not been yet achieved. Here, we report a study of the vibrational relaxation of the free OD carried out by time-resolved heterodyne-detected vibrational sum frequency generation spectroscopy. The results obtained with the aid of singular value decomposition analysis indicate that the vibrational relaxation (T1) time of the free OD at the air/D2O interface and air/isotopically diluted water (HOD-H2O) interfaces show no detectable isotopic dilution effect within the experimental error, as in the case of the free OH in the OH stretch region. Thus, it is concluded that the relaxation of the excited free OH/OD predominantly proceeds with their reorientation, negating a major contribution of the intramolecular energy transfer. It is also shown that the T1 time of the free OD is substantially longer than that of the free OH, further supporting the reorientation relaxation mechanism. The large difference in the T1 time between the free OD and the free OH (factor of ∼2) may indicate the nuclear quantum effect on the diffusive reorientation of the free OD/OH because this difference is significantly larger than the value expected for a classical rotational motion.

Twisted intramolecular charge transfer of nitroaromatic push\u2013pull chromophores

The structural changes during the intramolecular charge transfer (ICT) of nitroaromatic chromophores, 4-dimethylamino-4′-nitrobiphenyl (DNBP) and 4-dimethylamino-4′-nitrostilbene (DNS) were investigated by femtosecond stimulated Raman spectroscopy (FSRS) with both high spectral and temporal resolutions. The kinetically resolved Raman spectra of DNBP and DNS in the locally-excited and charge-transferred states of the S1 state appear distinct, especially in the skeletal vibrational modes of biphenyl and stilbene including ν8a and νC=C. The ν8a of two phenyls and the νC=C of the central ethylene group (only for stilbene), which are strongly coupled in the planar geometries, are broken with the twist of nitrophenyl group with the ICT. Time-resolved vibrational spectroscopy measurements and the time-dependent density functional theory simulations support the ultrafast ICT dynamics of 220–480 fs with the twist of nitrophenyl group occurring in the S1 state of the nitroaromatic chromophores. While the ICT of DNBP occurs via a barrier-less pathway, the ICT coordinates of DNS are strongly coupled to several low-frequency out-of-phase deformation modes relevant to the twist of the nitrophenyl group.

Modulations of a Metal-Ligand Interaction and Photophysical Behaviors by Hückel-Möbius Aromatic Switching.

In organometallic complexes containing π-conjugated macrocyclic chelate ligands, conformational change significantly affects metal-ligand electronic interactions, hence tuning properties of the complexes. In this regard, we investigated the metal-ligand interactions in hexaphyrin mono-Pd(II) complexes Pd[28]M and Pd[26]H, which exhibit a redox-induced switching of Hückel-Möbius aromaticity and subsequent molecular conformation, and their effect on the electronic structure and photophysical behaviors. In Möbius aromatic Pd[28]M, the weak metal-ligand interaction leads to the π electronic structure of the hexaphyrin ligand remaining almost intact, which undergoes efficient intersystem crossing (ISC) assisted by the heavy-atom effect of the Pd metal. In Hückel aromatic Pd[26]H, the significant metal-ligand interaction results in ligand-to-metal charge-transfer (LMCT) in the excited-state dynamics. These contrasting metal-ligand electronic interactions have been revealed by time-resolved electronic and vibrational spectroscopies and time-dependent DFT calculations. This work indicates that the conspicuous modulation of metal-ligand interaction by Hückel-Möbius aromaticity switching is an appealing approach to manipulate molecular properties of metal complexes, further enabling the fine-tuning of metal-ligand interactions and the novel design of functional organometallic materials.

Ultrafast Aggregation-Induced Tunable Emission Enhancement in a Benzothiadiazole-Based Fluorescent Metal-Organic Framework Linker.

Aggregation-induced emission enhancement (AIEE) is a process recently exploited in solid-state materials and organic luminophores, and it is explained by tight-molecular packaging. However, solution-phase AIEE and its formation mechanism have not been widely explored. This work investigated AIEE phenomena in two donor-acceptor-donor-type benzodiazole-based molecules (the organic building block in metal-organic frameworks) with an acetylene and phenyl π-conjugated backbone tapered with a carboxylic acid group at either end. This was done using time-resolved electronic and vibrational spectroscopy in conjunction with time-dependent density functional theory (TD-DFT) calculations. Fluorescence up-conversion spectroscopy and time-correlated single-photon counting conclusively showed an intramolecular charge transfer-driven aggregate emission enhancement. This is shown by a red spectral shift of the emission spectra as well as an increase in the fluorescence lifetime from 746 ps at 1.0 × 10-11 to 2.48 ns at 2.0 × 10-3 M. The TD-DFT calculations showed that a restricted intramolecular rotation mechanism is responsible for the enhanced emission. The femtosecond infrared (IR) transient absorption results directly revealed the structural dynamics of aggregate formation, as evident from the evolution of the C≡C vibrational marker mode of the acetylene unit upon photoexcitation. Moreover, the IR data clearly indicated that the aggregation process occurred over a time scale of 10 ps, which is consistent with the fluorescence up-conversion results. Interestingly, time-resolved results and DFT calculations clearly demonstrated that both acetylene bonds and the sulfur atom are the key requirements to achieve such a controllable aggregation-induced fluorescence enhancement. The finding of the work not only shows how slight changes in the chemical structure of fluorescent chromophores could make a tremendous change in their optical behavior but also prompts a surge of research into a profound understanding of the mechanistic origins of this phenomenon. This may lead to the discovery of new chemical strategies that aim to synthesize novel chromophores with excellent optical properties for light-harvesting applications.

Time-Resolved Raman Spectroscopy of Polaron Formation in a Polymer Photocatalyst

Polymer photocatalysts are a synthetically diverse class of materials that can be used for the production of solar fuels such as H2, but the underlying mechanisms by which they operate are poorly understood. Time-resolved vibrational spectroscopy provides a powerful structure-specific probe of photogenerated species. Here we report the use of time-resolved resonance Raman (TR3) spectroscopy to study the formation of polaron pairs and electron polarons in one of the most active linear polymer photocatalysts for H2 production, poly(dibenzo[b,d]thiophene sulfone), P10. We identify that polaron-pair formation prior to thermalization of the initially generated excited states is an important pathway for the generation of long-lived photoelectrons.

Elucidating Inner Workings of Naturally Sourced Organic Optoelectronic Materials with Ultrafast Spectroscopy.

Recent advances in sustainable optoelectronics including photovoltaics, light-emitting diodes, transistors, and semiconductors have been enabled by π-conjugated organic molecules. A fundamental understanding of light-matter interactions involving these materials can be realized by time-resolved electronic and vibrational spectroscopies. In this Minireview, the photoinduced mechanisms including charge/energy transfer, electronic (de)localization, and excited-state proton transfer are correlated with functional properties encompassing optical absorption, fluorescence quantum yield, conductivity, and photostability. Four naturally derived molecules (xylindein, dimethylxylindein, alizarin, indigo) with ultrafast spectral insights showcase efficient energy dissipation involving H-bonding networks and proton motions, which yield high photostability. Rational design principles derived from such investigations could increase the efficiency for light harvesting, triplet formation, and photosensitivity for improved and versatile optoelectronic performance.