Time-resolved Transient Absorption Spectroscopy Research Articles

Improving Three-Photon Fluorescence of Near-Infrared Quantum Dots for Deep Brain Imaging by Suppressing Biexciton Decay.

Three-photon fluorescence microscopy (3PFM) is a promising brain research tool with submicrometer spatial resolution and high imaging depth. However, only limited materials have been developed for 3PFM owing to the rigorous requirement of the three-photon fluorescence (3PF) process. Herein, under the guidance of a band gap engineering strategy, CdTe/CdSe/ZnS quantum dots (QDs) emitting in the near-infrared window are designed for constructing 3PF probes. The formation of type II structure significantly increased the three-photon absorption cross section of QDs and caused the delocalization of electron-hole wave functions. The time-resolved transient absorption spectroscopy confirmed that the decay of biexcitons was significantly suppressed due to the appropriate band gap alignment, which further enhanced the 3PF efficiency of QDs. By utilizing QD-based 3PF probes, high-resolution 3PFM imaging of cerebral vasculature was realized excited by a 1600 nm femtosecond laser, indicating the possibility of deep brain imaging with these 3PF probes.

Modulation of Photoinduced Phase Segregation and Stress-Driven Nanoscale Cracking in Hybrid Halide Perovskite Solar Cells.

The negative effect of photoinduced halide segregation (PIHS) on the properties of hybrid halide perovskites poses a major obstacle for its future commercial application. Therefore, the in-depth understanding of halide-ion segregation and its causes is an urgent and intractable problem. When PIHS reaches a certain threshold, it will aggravate the deterioration of the film surface morphology and form nanoscale cracks. Herein, the formation mechanism and types of cracks are revealed by exploring the stress distribution in the film. Using the femtosecond time-resolved transient absorption spectroscopy, the ultrafast formation of the iodine rich phase is observed, which appears earlier than the bromine rich phase. In addition, the introduction of organic ligand didodecyldimethylammonium bromide can significantly inhibit PIHS and improve the surface morphology of the film, which can promote the device efficiency from 9.63 to 11.20%. This work provides a novel perspective for the exploration of the PIHS.

Near-IR-Absorbing Bis-Donor Functionalized Aza-BODIPY Derivatives: Synthesis and Photophysical Study by Using Transient Optical Spectroscopy.

A series of near-IR absorbing 2,6-diarylated BF2-chelated aza-boron-dipyrromethenes (aza-BDPs) derivatives bearing different electron donors (benzene, naphthalene, phenanthrene, phenothiazine and carbazole) were designed and synthesized. The effect of different electron donor substitutions on the photophysical properties was studied by steady-state UV-vis absorption and fluorescence spectra, electrochemical, time-resolved nanosecond transient absorption (ns-TA) spectroscopy and theoretical computations. The UV-vis absorption spectra of AzaBDP-PTZ and AzaBDP-CAR (λabs=710 nm in toluene) showed a bathochromic absorption profile compared with the reference AzaBDP-Ph (λabs=685 nm in toluene), indicating the non-negligible electronic interaction at the ground state between donor and acceptor moieties. Moreover, the fluorescence is almost completely quenched for AzaBDP-PTZ/AzaBDP-CAR (fluorescence quantum yield, ΦF=0.2-0.7 % in toluene) as compared with the AzaBDP-Ph (ΦF=27 % in toluene). However, the apparent intersystem crossing ability of these compounds is poor, based on the singlet oxygen quantum yield (ΦΔ=0.3-1.5 %). The ns-TA spectral study showed typical Bodipy localized triplet state transient features, short-lived excited triplet state for AzaBDP-Ph (τT=53.2 μs) versus significantly long-lived triplet state for AzaBDP-CAR (τT=114 μs) was observed under deaerated experimental conditions. These triplet state lifetimes are much longer than that obtained with diiodoAzaBDP (intramolecular heavy atom effect, τT=1.5~7.2 μs). These information are useful for molecular structure design of triplet photosensitizers, for which longer triplet state lifetimes are usually desired. Theoretical computations displayed that the triplet state is mainly localized on the AzaBDP core, moreover, it was found that the HOMO/LUMO energy gap decreased after introducing donor moieties to the skeleton as compared with the reference.

Halide Engineering in Mixed Halide Perovskite-Inspired Cu2AgBiI6 for Solar Cells with Enhanced Performance.

Cu2AgBiI6 (CABI) is a promising perovskite-inspired absorber for solar cells due to its direct band gap and high absorption coefficient. However, the nonradiative recombination caused by the high extrinsic trap density limits the performance of CABI-based solar cells. In this work, we employ halide engineering by doping bromide anions (Br-) in CABI thin films, in turn significantly improving the power conversion efficiency (PCE). By introducing Br- in the synthetic route of CABI thin films, we identify the optimum composition as CABI-10Br (with 10% Br at the halide site). The tailored composition appears to reduce the deep trap density as shown by time-resolved photoluminescence and transient absorption spectroscopy characterizations. This leads to a dramatic increase in the lifetime of charge carriers, which therefore improves both the external quantum efficiency and the integrated short-circuit current. The photovoltaic performance shows a significant boost since the PCE under standard 1 sun illumination increases from 1.32 to 1.69% (∼30% relative enhancement). Systematic theoretical and experimental characterizations were employed to investigate the effect of Br- incorporation on the optoelectronic properties of CABI. Our results highlight the importance of mitigating trap states in lead-free perovskite-inspired materials and that Br- incorporation at the halide site is an effective strategy for improving the device performance.

Shell thickness influence on the carrier dynamics of InP/ZnS QDs

InP/ZnS core/shell quantum dots (QDs) have been widely applied in many fields due to their excellent luminescence performance. In this study, the correlation between the ZnS shell thickness and the ultrafast carrier dynamics in InP/ZnS QDs was investigated by using femtosecond time-resolved transient absorption spectroscopy and time-resolved photoluminescence techniques. We found that a thicker ZnS shell could confine more carriers to the InP core, thus effectively weakening the interactions between the carriers in the core and the interfacial defect states; this further enhanced the quantum yields and photoluminescence properties in InP/ZnS QDs.

Charge Trapping in Semiconductor Photocatalysts: A Time- and Space-Domain Perspective.

Harnessing solar energy to produce value-added fuels and chemicals through photocatalysis techniques holds promise for establishing a sustainable and environmentally friendly energy economy. The intricate dynamics of photogenerated charge carriers lies at the core of the photocatalysis. The balance between charge trapping and band-edge recombination has a crucial influence on the activity of semiconductor photocatalysts. Consequently, the regulation of traps in photocatalysts becomes the key to optimizing their activities. Nevertheless, our comprehension of charge trapping, compared to that of well-studied charge recombination, remains somewhat limited. This limitation stems from the inherently heterogeneous nature of traps at both temporal and spatial scales, which renders the characterization of charge trapping a formidable challenge. Fortunately, recent advancements in both time-resolved spectroscopy and space-resolved microscopy have paved the way for considerable progress in the investigation and manipulation of charge trapping. In this Perspective, we focus on charge trapping in photocatalysts with the aim of establishing a direct link to their photocatalytic activities. To achieve this, we begin by elucidating the principles of advanced time-resolved spectroscopic techniques such as femtosecond time-resolved transient absorption spectroscopy and space-resolved microscopic methods, such as single-molecule fluorescence microscopy and surface photovoltage microscopy. Additionally, we provide an overview of noteworthy research endeavors dedicated to probing charge trapping using time- and space-resolved techniques. Our attention is then directed toward recent achievements in the manipulation of charge trapping in photocatalysts through defect engineering. Finally, we summarize this Perspective and discuss the future challenges and opportunities that lie ahead in the field.

Time-Resolved Spectroscopy for Dynamic Investigation of Photoresponsive Metal-Organic Frameworks.

Photoresponsive MOFs with precise and adjustable reticular structures are attractive for light conversion applications. Uncovering the photoinduced carrier dynamics lays the essential foundation for the further development and optimization of the MOF material. With the application of time-resolved spectroscopy, photophysical processes including excimer formation, energy transfer/migration, and charge transfer/separation have been widely investigated. However, the identification of distinct photophysical processes in real experimental MOF spectra still remains difficult due to the spectral and dynamic complexity of MOFs. In this Perspective, we summarize the typical spectral features of these photophysical processes and the related analysis methods for dynamic studies performed by time-resolved photoluminescence (TR-PL) and transient absorption (TA) spectroscopy. Based on the recent understanding of excited-state properties of photoresponsive MOFs and the discussion of challenges and future outlooks, this Perspective aims to provide convenience for MOF kinetic analysis and contribute to the further development of photoresponsive MOF material.

Site-Directed Mutagenesis of the Chlorophyll-Binding Sites Modulates Excited-State Lifetime and Chlorophyll-Xanthophyll Energy Transfer in the Monomeric Light-Harvesting Complex CP29.

We combine site-directed mutagenesis with picosecond time-resolved fluorescence and femtosecond transient absorption (TA) spectroscopies to identify excitation energy transfer (EET) processes between chlorophylls (Chls) and xanthophylls (Xant) in the minor antenna complex CP29 assembled inside nanodiscs, which result in quenching. When compared to WT CP29, a longer lifetime was observed in the A2 mutant, missing Chl a612, which closely interacts with Xant Lutein in site L1. Conversely, a shorter lifetime was obtained in the A5 mutant, in which the interaction between Chl a603 and Chl a609 is strengthened, shifting absorption to lower energy and enhancing Chl-Xant EET. Global analysis of TA data indicated that EET from Chl a Qy to a Car dark state S* is active in both the A2 and A5 mutants and that their rate constants are modulated by mutations. Our study provides experimental evidence that multiple Chl-Xant interactions are involved in the quenching activity of CP29.

Solid-State Emissive meso-Aryl/Alkyl-Substituted and Heteroatom-Mixed BOPPY Dyes: Syntheses, Structures, Physicochemical, Redox Properties, and Computational Analysis.

A series of solid-state emissive meso-aryl/alkyl-substituted and heteroatom-mixed bisBF2-anchoring fluorophore incorporating pyrrolyl-pyridylhydrazone (BOPPY) dyes have been developed by a one-pot condensation of ketonized or formylated pyrroles and 2-heterocyclohydrazine as well as the subsequent borylation coordination. Interestingly, the BOPPY dyes with meso-alkyl-substituted groups or oxygen-substituted pyridine moieties exhibit high fluorescence quantum yields (QYs) of up to 79%, the highest solid QY of 74%, and long lifetimes independent of polarity in the available BOPPYs. On the other hand, the BOPPYs with meso-aryl or N-substituted moieties display a high solution QY of up to 93% and slight emission wavelength maxima. However, the S-substituted BOPPY dye exhibited weak fluorescence in all studied solvents, which was attributed to the structural flexibility of the N-C-S bond and different from those BOPPYs with O or N substitution, indicated by quantum calculations. And the significant excited-state structural rearrangement in a polar solvent is further confirmed by femtosecond time-resolved transient absorption spectroscopy. More importantly, those novel and barely fluorescent BOPPYs in acetonitrile show advantageous aggregation-induced enhanced emission and viscosity-dependent activities. These advancements in the photophysical and electrochemical properties of BOPPY dyes offer valuable insights into their further development and potential applications.

Difference of carrier dynamics in a semiconductor saturable absorber mirror with and without B+ ion-implantation.

Three samples whose growth temperatures were 450°C, 500°C, and 560°C for S E S A M 1, S E S A M 2, and S E S A M 3, respectively, were tested by femto-second time-resolved transient absorption spectroscopy. The results indicate that the carrier dynamics of excited state absorption were dominant, and the lifetimes of carriers trapped by defect levels were about tens of pico-seconds. To further study the influence of carrier dynamics and recovery time of samples by ion-implantation, B + ions of 80 and 130 KeV were implanted into the samples with dose of 1014/c m 2. The modified samples showed a dominance of ultra-fast carrier dynamics of ground-state bleaching and direct recombination, which lasted for hundreds of femto-seconds, over excited state absorption. Additionally, carrier fast trapping was observed to be competitive with the excited state absorption process. After ion-implantation, the carrier dynamics of carrier trapping were enhanced, which contributed to forming an ultra-short laser, while the carrier dynamics of absorption of the excited state were suppressed. The conclusion that defect levels were partially eliminated by B + ion-implantation can be drawn.

Controlling Exciton/Exciton Recombination in 2-D Perovskite Using Exciton-Polariton Coupling.

In this paper, we demonstrate that exciton/exciton annihilation in the 2D perovskite (PEA)2PbI4 (PEPI)─a major loss mechanism in solar cells and light-emitting diodes, can be controlled through coupling of excitons with cavity polaritons. We study the excited state dynamics using time-resolved transient absorption spectroscopy and show that the system can be tuned through a strong coupling regime by varying the cavity width through the PEPI layer thickness. Remarkably, strong coupling occurs even when the cavity quality factor remains poor, providing easy optical access. We demonstrate that the observed derivative-like transient absorption spectra can be modeled using a time-dependent Rabi splitting that occurs because of transient bleaching of the excitonic states. When PEPI is strongly coupled to the cavity, the exciton/exciton annihilation rate is suppressed by 1 order of magnitude. A model that relies on the partly photonic character of polaritons explains the results as a function of detuning.

Dicationic Acridinium/Carbene Hybrids as Strongly Oxidizing Photocatalysts.

A new design concept for organic, strongly oxidizing photocatalysts is described based upon dicationic acridinium/carbene hybrids. A highly modular synthesis of such hybrids is presented, and the dications are utilized as novel, tailor-made photoredox catalysts in the direct oxidative C-N coupling. Under optimized conditions, benzene and even electron-deficient arenes can be oxidized and coupled with a range of N-heterocycles in high to excellent yields with a single low-energy photon per catalytic turnover, while commonly used acridinium photocatalysts are not able to perform the challenging oxidation step. In contrast to traditional photocatalysts, the hybrid photocatalysts reported here feature a reversible two-electron redox system with regular or inverted redox potentials for the two-electron transfer. The different oxidation states could be isolated and structurally characterized supported by NMR, EPR, and X-ray analysis. Mechanistic experiments employing time-resolved emission and transient absorption spectroscopy unambiguously reveal the outstanding excited-state potential of our best-performing catalyst (+2.5 V vs SCE), and they provide evidence for mechanistic key steps and intermediates.

Photophysical Study on the Effect of the External Potential on NiO-Based Photocathodes.

In the present study, we investigate the effects of the applied external potential on a dye-sensitized NiO photocathode by time-resolved photoluminescence and femtosecond transient absorption spectroscopy under operating conditions. Instead of the anticipated acceleration of photoinduced hole injection from dye into NiO at a more negative applied potential, we observe that both hole injection and charge recombination are slowed down. We cautiously assign this effect to a variation in OH- ion concentration in the inner Helmholtz plane of the electrochemical double layer with applied potential, warranting further investigation for the realization of efficient solar fuel devices.

A Review: Principles and Applications of High-Pressure In Situ Time-Resolved Transient Absorption Spectroscopy

Time-resolved transient absorption (TA) spectroscopy measurement technology provides detailed information into the ultrafast dynamics by tracking the transitions and deactivation processes of the excited-state carriers, which holds vast potential for investigating processes related to the luminescence and nonradiative recombination of materials. Pressure is considered a potent tool for tuning the carrier dynamic behaviors. The combination of high-pressure experimental technology and time-resolved TA spectroscopy measurement technology enables researchers to reveal the inherent relation between the structure and optical properties of materials, which is crucial for optimizing material performance and applications in the field of optoelectronics. In this review, the principles and the theoretical foundations of high-pressure time-resolved TA spectroscopy measurement technology will be introduced, and the research advancements in ultrafast dynamics processes of materials under high pressure will be summarized and discussed. In addition, we will expound on the future prospects of time-resolved TA spectroscopy measurement technology to detect the ultrafast dynamic behaviors of materials and complexes under the coregulation of temperature and pressure.

Is 1-methylcytosine a faithful model compound for ultrafast deactivation dynamics of cytosine nucleosides in solution?

1-Methylcytosine (1mCyt) is the base for nucleoside N1-methylpseudodeoxycytidine of Hachimoji nucleic acids and a frequently used model compound for theoretical studies on excited states of cytosine nucleosides. However, there is little experimental characterization of spectra and photo-dynamic properties of 1mCyt. Herein, we report a comprehensive investigation into excited state dynamics and effects of solvents on fluorescence dynamics of 1mCyt in both water and acetonitrile. The study employed femtosecond broadband time-resolved fluorescence, transient absorption, and steady-state spectroscopy, along with density functional theory and time-dependent density functional theory calculations. The results obtained provide the first experimental evidence for identifying a dark-natured ∼5.7 ps lifetime nπ* state in the ultrafast non-radiative deactivation with 1mCyt in aqueous solution. This study also demonstrates a significant effect of the solvent on 1mCyt's fluorescence emission, which highlights the crucial role of solute-solvent hydrogen bonding in altering structures and reshaping the radiative as well as nonradiative dynamics of the 1mCyt's ππ* state in the aprotic solvent compared to the protic solvent. The solvent effect exhibited by 1mCyt is distinctive from that known for deoxycytidine, indicating the need for caution in using 1mCyt for modelling the ultrafast dynamics of Cyt nucleosides in solvents with varying properties. Overall, our study unveils a deactivation mechanism that confers a high degree of photo-stability for 1mCyt in solution, shedding light on the molecular basis for solvent-induced effects on the excited state dynamics of nucleobases and derivatives.

Solvent-polarity dependence of ultrafast excited-state dynamics of trans-4-nitrostilbene.

Ultrafast excited-state dynamics of the simplest nitrostilbenes, namely trans-4-nitrostilbene (t-NSB), was studied in solvents of various polarities with ultrafast broadband time-resolved fluorescence and transient absorption spectroscopies, and by quantum-chemical computations. The results revealed that the initially excited S1(ππ*) state deactivation dynamics is strongly influenced by the solvent polarity. Specifically, the t-NSB S1-state lifetime decreases by three orders of magnitude from ∼60 ps in high-polarity solvents to ∼60 fs in nonpolar solvents. The strong solvent-polarity dependence arises from the differences in dipole moments among the S1 and relevant states, including the major intersystem crossing (ISC) receiver triplet states, and therefore, the solvent polarity can modulate their relative energies and ISC rates. In nonpolar solvents, the sub-100 fs lifetime is due to a combination of efficient ISC and internal conversion. In medium-polarity solvents, the S1-state population decays via a competing ISC relaxation mechanism in a biphasic manner, and the ISC rates are found to obey the inverse energy gap law of the strong coupling case. In high-polarity solvents, the S1 state is stabilized to a much lower energy such that ISC becomes energetically infeasible, and the S1 state decays via barrier crossing along the torsion angle of the central ethylenic bond to the nonfluorescent perpendicular configuration. Regardless of the initial S1-state deactivation pathways in various solvents, the excited-state population is ultimately trapped in the metastable T1-state perpendicular configuration, at which a slower ISC occurs to bring the system to the ground state and bifurcate into either trans or cis form of NSB.

Wavelength Selective Photocontrol of Hybrid Azobenzene-Spiropyran Photoswitches with Overlapping Chromophores.

Compounds with multiple photoswitching units are appealing for complex photochemical control of molecular materials and nanostructures. Herein, we synthesized novel meta- and para- connected (related to the nitrogen of the indoline) azobenzene-spiropyran dyads, in which the central benzene unit is shared by both switches. We investigated their photochemistry using static and time-resolved transient absorption spectroscopy as well as quantum chemical calculations. In the meta-compound, the individual components are photochemically decoupled due to the meta-pattern. In the para-compound the spiro-connectivity leads to a bifunctional photoswitchable system with a red-shifted absorption. The azobenzene and the spiropyran can thus be addressed and switched independently by light of appropriate wavelength. Through the different connectivity patterns two different orthogonally photoswitchable systems have been obtained which are promising candidates for complex applications of light control.

Persistent Charging of CsPbBr3 Perovskite Nanocrystals Confined in Glass Matrix.

Manipulation of persistent charges in semiconductor nanostructure is the key point to obtain quantum bits towards the application of quantum memory and information devices. However, realizing persistent charge storage in semiconductor nano-systems is still very challenge due to the disturbance from crystal defects and environment conditions. Herein, the two-photon persistent charging induced long-lasting afterglow and charged exciton formation are observed in CsPbBr3 perovskite nanocrystals (NCs) confined in glass host with effective lifetime surpassing one second, where the glass inclosure provides effective protection. A method combining the femtosecond and second time-resolved transient absorption spectroscopy is explored to determine the persistent charging possibility of perovskite NCs unambiguously. Meanwhile, with temperature-dependent spectroscopy, the underlying mechanism of this persistent charging is elucidated. A two-channel carrier transfer model is proposed involving athermal quantum tunneling and slower thermal-assisted channel. On this basis, two different information storage devices are demonstrated with the memory time exceeding two hours under low-temperature condition. These results provide a new strategy to realize persistent charging in perovskite NCs and deepen the understanding of the underlying carrier kinetics, which may pave an alternative way towards novel information memory and optical data storage applications.

Carrier transfer in quasi-2D perovskite/MoS2 monolayer heterostructure

Abstract Two-dimensional layered semiconductors have attracted intense interest in recent years. The van der Waals coupling between the layers tolerates stacking various materials and establishing heterostructures with new characteristics for a wide range of optoelectronic applications. The interlayer exciton dynamics at the interface within the heterostructure are vitally important for the performance of the photodetector and photovoltaic device. Here, a heterostructure comprising two-dimensional organic-inorganic Ruddlesden–Popper perovskites and transition metal dichalcogenide monolayer was fabricated and its ultrafast charge separation processes were systematically studied by using femtosecond time-resolved transient absorption spectroscopy. Significant hole and electron transfer processes in the ps and fs magnitude at the interface of the heterostructure were observed by tuning pump wavelengths of the pump-probe geometries. The results emphasize the realization of the exciton devices based on semiconductor heterostructures of two-dimensional perovskite and transition metal dichalcogenide.

Pushing the heterometal doping limit while preserving long-lived charge separation in a Ti-based MOF photocatalyst

This study explores the nature, dynamics, and reactivity of the photo-induced charge separated excited state in a Fe3+-doped titanium-based metal organic framework (MOF), xFeMIL125-NH2, as a function of iron concentration. The MOF is synthesized with doping levels x = 0.5, 1 and 2 Fe node sites per octameric Ti-oxo cluster and characterized by powder x-ray diffraction, UV-vis diffuse reflectance, atomic absorption, and steady state Fe K-edge X-ray absorption spectroscopy. For each doping level, time-resolved X-ray transient absorption spectroscopy studies confirm the electron trap site role of the Fe sites in the excited state. Time scan data reveal multiexponential decay kinetics for the charge recombination processes which extend into the microsecond range for all three concentrations. A series of dye photodegradation studies, based on the oxidative decomposition of Rhodamine B, demonstrates the reactivity of the charge separated excited state and the photocatalytic capacity of these MOF materials compared to traditional heterometal-doped semiconductor photocatalysts.