Time-resolved Small-angle X-ray Research Articles

Modulating Interfacial Properties in Pseudoternary Microemulsions via Urea Addition: Impact of Cosurfactant on the Reverse Micellar Structure and Interactions.

We have studied the structural and interfacial properties of CTAB/isooctane/alcohol/aqueous urea reverse micelles (RMs) for the first time using time-resolved fluorescence and small-angle X-ray scattering techniques. The chain length of alcohol, used as cosurfactant, has been varied to design three microemulsion systems: CTAB/1-butanol, CTAB/1-hexanol, and CTAB/1-octanol/isooctane/water, at a fixed water loading ratio, w0 = 12. Time-resolved fluorescence anisotropy studies indicate that urea induces micellar aggregation in CTAB/1-butanol and CTAB/1-hexanol RMs but breaks down RM aggregates in CTAB/1-octanol RMs. Urea addition slows down solvation dynamics inside RMs at higher urea concentrations, evident from the longer lifetimes of solvent correlation decay. The underlying changes in microemulsion structure and intermicellar interactions are studied using small-angle X-ray scattering studies. The significant intermicellar interactions were modeled using the sticky hard sphere (SHS) for the CTAB/1-butanol and CTAB/1-hexanol RMs and by using the Macroion model for the CTAB/1-octanol RMs. The two different structural factors highlight the dominance of attractive and repulsive forces, respectively. Although there is no change in RM shape, the combination of urea addition and chain length variation in cosurfactants significantly alters the size and interface in these pseudoternary RMs.

Evaporation-induced self-assembly of Janus pyramid molecules from fractal network to core-shell nanoclusters evidenced by small-angle X-ray scattering

Self-assembly of nanoclusters (NCs) is an effective synthetic method for preparing functionalized nanomaterials. However, the assembly process and mechanisms in solutions still remain ambiguous owing to the limited strategies to monitor intermediate assembled states. Herein, the self-assembly process of amphiphilic molecule 4POSS-DL-POM (consisting of four polyhedral oligomeric silsesquioxanes, a dendritic linker, and one polyoxometalate) by evaporation of acetone in a mixed acetone/n-decane solution is monitored by time-resolved synchrotron small-angle X-ray scattering (SAXS). Scattering data assessments, including Kratky analysis, pair distance distribution function, and model fitting, track the self-assembly process of 4POSS-DL-POM from a fractal network to compact NCs, then to core–shell NCs, and finally to superlattice structure. The calculated average aggregation number of a core–shell NC is 11 according to the parameters obtained from core-shell model fitting, in agreement with electron microscopy. The fundamental understanding of the self-assembly dynamics from heterocluster into NCs provides principles to control building block shape and guide target aggregation, which can further promote the design and construction of highly ordered cluster-assembled functional nanomaterials.

Supracolloidal step-growth polymerization of isotropic silica nanoparticles: a time-resolved small-angle X-ray scattering study

Supracolloidal step-growth polymerization of isotropic silica nanoparticles: a time-resolved small-angle X-ray scattering study

Disaggregation and fibrillation during sol-gel transition of alginate hydrogels

The rheological and morphological characteristics of Ca-crosslinked alginate hydrogels with two different M/G ratios, α-L-guluronate (G)-rich and β-D-mannuronate (M)-rich, each with one alginic acid concentration, were investigated. It was found that the stiffness and elasticity of alginate hydrogels are derived from the thickness and density of the fibril network structures. In aqueous alginate solution, ball-like aggregates of alginates are present. Time-resolved small-angle X-ray scattering and time-domain nuclear magnetic resonance measurements suggest that the disaggregation of alginate aggregates and loose fibrillation occur in the early stage of the sol-gel transition. After these induction stage, direct gelation is finally caused by the formation of the egg-box junction. G-rich alginate hydrogel has a higher stiffness and a thicker and denser fibril network structure than M-rich alginate hydrogel. The former also exhibits faster and more significant changes in physical properties during the sol-gel transition.

A new experimental station for microbeam X-ray scattering at the SSRF BL10U1 beamline

Benefiting from the development of high-brilliance synchrotron radiation sources, microbeam X-ray scattering has become a well established scattering-based imaging technology. This article describes the newly constructed time-resolved microbeam small-angle X-ray scattering (µSAXS) experimental station at the BL10U1 beamline at the Shanghai Synchrotron Radiation Facility. The µSAXS endstation provides SAXS/WAXS measurements with a 10 µm hard X-ray beam and a flux of ∼1012 photons s−1. A multi-axis sample stage, an on-axis viewer and in situ experimental apparatus are incorporated to facilitate multi-method scientific experiments in various material fields. As scientific examples, this article explores 1D tomography, 2D mapping and tomographic sectioning based on X-ray scattering to investigate the micro–nanostructures of polymer fiber, spherulite and bamboo samples.

Understanding the effects of ethanol on the liposome bilayer structure using microfluidic-based time-resolved small-angle X-ray scattering and molecular dynamics simulations.

Lipid nanoparticles (LNPs) are essential carrier particles in drug delivery systems, particularly in ribonucleic acid delivery. In preparing lipid-based nanoparticles, microfluidic-based ethanol injection may produce precisely size-controlled nanoparticles. Ethanol is critical in LNP formation and post-treatment processes and affects liposome size, structure, lamellarity, and drug-loading efficiency. However, the effects of time-dependent changes in the ethanol concentration on the structural dynamics of liposomes are not clearly understood. Herein, we investigated ethanol-induced lipid bilayer changes in liposomes on a time scale from microseconds to tens of seconds using a microfluidic-based small-angle X-ray scattering (SAXS) measurement system coupled with molecular dynamics (MD) simulations. The time-resolved SAXS measurement system revealed that single unilamellar liposomes were converted to multilamellar liposomes within 0.8 s of contact with ethanol, and the d-spacing was decreased from 6.1 (w/o ethanol) to 4.4 nm (80% ethanol) with increasing ethanol concentration. We conducted 1 μs MD simulations to understand the molecular-level structural changes in the liposomes. The MD simulations revealed that the changes in the lamellar structure caused by ethanol at the molecular level could explain the structural changes in the liposomes observed via time-resolved SAXS. Therefore, the post-treatment process to remove residual ethanol is critical in liposome formation.

Determination of Reaction Kinetics by Time-Resolved Small-Angle X-ray Scattering during Polymerization-Induced Self-Assembly: Direct Evidence for Monomer-Swollen Nanoparticles.

The kinetics of heterogeneous polymerization is determined directly using small-angle X-ray scattering (SAXS). This important advancement is exemplified for the synthesis of sterically-stabilized diblock copolymer nanoparticles by reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate (BzMA) in mineral oil at 90 °C. The principle of mass balance is invoked to derive a series of equations for the analysis of the resulting time-resolved SAXS patterns. Importantly, there is a continuous change in the X-ray scattering length density for the various components within the reaction mixture. This enables the volume fraction of unreacted BzMA monomer to be calculated at any given time point, which enables the polymerization kinetics to be monitored in situ directly without relying on supplementary characterization techniques. Moreover, SAXS enables the local concentration of both monomer and solvent within the growing swollen nanoparticles to be determined during the polymerization. Data analysis reveals that the instantaneous rate of BzMA polymerization is proportional to the local monomer concentration within the nanoparticles. In principle, this powerful new time-resolved SAXS approach can be applicable to other heterogeneous polymerization formulations.

Real-Time pH-Dependent Self-Assembly of Ionisable Lipids from COVID-19 Vaccines and In Situ Nucleic Acid Complexation.

Ionisable amino-lipid is a key component in lipid nanoparticles (LNPs), which plays a crucial role in the encapsulation of RNA molecules, allowing efficient cellular uptake and then releasing RNA from acidic endosomes. Herein, we present direct evidence for the remarkable structural transitions, with decreasing membrane curvature, including from inverse micellar, to inverse hexagonal, to two distinct inverse bicontinuous cubic, and finally to a lamellar phase for the two mainstream COVID-19 vaccine ionisable ALC-0315 and SM-102 lipids, occurring upon gradual acidification as encountered in endosomes. The millisecond kinetic growth of the inverse cubic and hexagonal structures and the evolution of the ordered structural formation upon ionisable lipid-RNA/DNA complexation are quantitatively revealed by in situ synchrotron radiation time-resolved small angle X-ray scattering coupled with rapid flow mixing. We found that the final self-assembled structural identity, and the formation kinetics, were controlled by the ionisable lipid molecular structure, acidic bulk environment, lipid compositions, and nucleic acid molecular structure/size. The implicated link between the inverse membrane curvature of LNP and LNP endosomal escape helps future optimisation of ionisable lipids and LNP engineering for RNA and gene delivery.

Solvent selectivity governed self-assembly of block copolymer in nanofabrication

Block copolymer-based nanoproducts including particles, fibers and films show promise in high-end applications including nanotemplating, nanolithography, and nanoporous membranes due to their advantageous self-assembled structure. However, few studies probe the nanofabrication process in detail and monitor the concomitant self-assembled structural transitions. Herein, time-resolved small-angle X-ray scattering (SAXS) is exploited to follow such nanostructural changes. Evaporation-induced casting, electrospraying or electrospinning, followed by a final solvent vapor annealing step, have been used to create a series of nanoproducts with reversibly tunable morphologies from a model block copolymer, polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene (SEBS). During evaporation-induced casting, which is considered as an unconfined system, a selective (co)solvent system composed of tetrahydrofuran (THF) and dimethylformamide (DMF) can lead to the formation of various SEBS structures. For DMF-based unconfined systems, the final SEBS lamellar structures were found to be different from the structure formed from THF only, demonstrating the critical role of solvent selection in evaporation-induced casting. The comparison of SEBS electrospun fibers reveals the unique and complex self-assembled structural transition occurring in a confined system. Time-resolved SAXS studies of our model triblock copolymer provide guidelines for a more general approach to access various nanostructures from self-assembling block copolymers.

Insights into the precipitation kinetics of CaCO3 particles in the presence of polystyrene sulfonate using in situ small-angle X-ray scattering.

The formation of calcium carbonate (CaCO3) nanoparticles (NPs) in the presence of polystyrene sulfonate (PSS) as an additive was examined by time-resolved small-angle X-ray scattering (SAXS) in a flow system that mimics experimental conditions used at home facilities where the precipitation can be achieved in a beaker. The experiments were carried out at low concentrations to remain in the dilute regime. A model-independent analysis was performed using the Porod invariant which defines the scale factor, leaving only the distribution of radii as the adjustable parameter. The presence of the PSS additive strongly retards the precipitation of CaCO3 NPs. The formation of NPs reaches a state of equilibrium after a few minutes. Here, it is shown that the concentration of precursors at a fixed PSS concentration plays a key role in determining the size of the NPs obtained. A full analysis of the SAXS patterns was carried out using the Hurd-Flower model to account for the weaker intensity decay than the classical Porod behaviour. The temporal evolution of the particle radii was determined. Wide-angle X-ray scattering experiments carried out simultaneously show that the particles formed have the structure of vaterite with growth consistent with the evolution of the Porod invariant.

Energetics and Kinetic Assembly Pathways of Hepatitis B Virus Capsids in the Presence of Antivirals.

Capsid assembly modulators (CAMs) are antiviral molecules that disturb the formation of icosahedral viral capsids, in particular, those of the Hepatitis B virus (HBV). We report an integrated, physics-driven study elucidating quantitatively the effects of two classes of CAMs on the HBV capsid assembly. Time-resolved small-angle X-ray scattering measurements revealed accelerated self-assembly processes that implied the increase of subunit binding energy from 9- up to 18-fold the thermal energy due to CAMs. Cryotransmission electron microscopy images showed that both classes induce various changes in capsid morphology: from a slight elongation, unrecognized in previous work, to a strong deformation with a capsid size more than twice as large. The observed capsid morphologies were closely reproduced in coarse-grained simulations by varying the Föppl-von-Kármán number, thus pointing out the role of CAMs in altering the capsid elastic energy. Our results illuminate the mechanisms of action of CAMs on HBV capsid assembly at high spatiotemporal resolution and may bring perspectives on virus-derived nanocapsules with tunable morphologies.

In Situ Monitoring of Polymerization-Induced Self-Assembly and Gelation During the Synthesis of Triblock Copolymers via Time-Resolved Small-Angle X-ray Scattering and Rheology

<i>In Situ</i> Monitoring of Polymerization-Induced Self-Assembly and Gelation During the Synthesis of Triblock Copolymers <i>via</i> Time-Resolved Small-Angle X-ray Scattering and Rheology

Conceptual Design of a Synchrotron Beamline Dedicated to Ultrafast Time-Resolved Small-Angle X-Ray Scattering

Conceptual Design of a Synchrotron Beamline Dedicated to Ultrafast Time-Resolved Small-Angle X-Ray Scattering

Chaotic advection mixer for capturing transient states of diverse biological macromolecular systems with time-resolved small-angle X-ray scattering.

Advances in time-resolved structural techniques, mainly in macromolecular crystallography and small-angle X-ray scattering (SAXS), allow for a detailed view of the dynamics of biological macromolecules and reactions between binding partners. Of particular promise, are mix-and-inject techniques, which offer a wide range of experimental possibility as microfluidic mixers are used to rapidly combine two species just prior to data collection. Most mix-and-inject approaches rely on diffusive mixers, which have been effectively used within crystallography and SAXS for a variety of systems, but their success is dependent on a specific set of conditions to facilitate fast diffusion for mixing. The use of a new chaotic advection mixer designed for microfluidic applications helps to further broaden the types of systems compatible with time-resolved mixing experiments. The chaotic advection mixer can create ultra-thin, alternating layers of liquid, enabling faster diffusion so that even more slowly diffusing molecules, like proteins or nucleic acids, can achieve fast mixing on timescales relevant to biological reactions. This mixer was first used in UV-vis absorbance and SAXS experiments with systems of a variety of molecular weights, and thus diffusion speeds. Careful effort was also dedicated to making a loop-loading sample-delivery system that consumes as little sample as possible, enabling the study of precious, laboratory-purified samples. The combination of the versatile mixer with low sample consumption opens the door to many new applications for mix-and-inject studies.

A novel droplet-based approach to study phase transformations in lyotropic liquid crystalline systems

HypothesisLyotropic liquid crystals (LLC) and their phase transformations in response to stimuli have gathered much interest for controlled and ‘on-demand’ drug applications. Bulk methods of preparation impose limitations on studying the transformations, especially induced by compositional changes, such as enzymatic changes to lipid structure. Here we hypothesise that controlled microfluidic production and coalescence of dissimilar aqueous and lipid droplets emulsified in a third mutually immiscible liquid will provide a new approach to the spatio-temporal study of structure formation in lyotropic liquid crystalline materials. ExperimentsSeparate lipid and aqueous droplets, dispersed in a fluorocarbon oil were generated using a microfluidic format. The chip, prepared as a hybrid polydimethylsiloxane (PDMS) and glass microfluidic device, was constructed to enable in-situ acquisition of time-resolved synchrotron small angle X-ray scattering (SAXS) and crossed polarised light microscopy of the coalesced droplets to determine the structures present during aging. FindingsJanus-like droplets formed upon coalesce, with distinct lipid and aqueous portions with a gradient between the two sides of the merged droplet. SAXS and polarised light microscopy revealed a progression of mesophases as the lipid portion was hydrated by the aqueous portion via the diffusion limited interface which separated the portions. Thus demonstrating, on a droplet scale, a new approach for studying the phase transformation kinetics and identification of non-equilibrium phase in droplet-based lyotropic liquid systems.

Tunable Ordered Nanostructured Phases by Co-assembly of Amphiphilic Polyoxometalates and Pluronic Block Copolymers.

The assembly of polyoxometalate (POM) metal-oxygen clusters into ordered nanostructures is attracting a growing interest for catalytic and sensing applications. However, assembly of ordered nanostructured POMs from solution can be impaired by aggregation, and the structural diversity is poorly understood. Here, we present a time-resolved small-angle X-ray scattering (SAXS) study of the co-assembly in aqueous solutions of amphiphilic organo-functionalized Wells-Dawson-type POMs with a Pluronic block copolymer over a wide concentration range in levitating droplets. SAXS analysis revealed the formation and subsequent transformation with increasing concentration of large vesicles, a lamellar phase, a mixture of two cubic phases that evolved into one dominating cubic phase, and eventually a hexagonal phase formed at concentrations above 110 mM. The structural versatility of co-assembled amphiphilic POMs and Pluronic block copolymers was supported by dissipative particle dynamics simulations and cryo-TEM.

Time-Resolved Small-Angle X-Ray Scattering of Protein Cage Assembly.

Recent improvements in X-ray detectors and synchrotron light sources have made it possible to measure time-resolved small-angle X-ray scattering (TR-SAXS) at millisecond time resolution. As an example, in this chapter we describe the beamline setup, experimental scheme, and the points that should be noted in stopped-flow TR-SAXS experiments for investigating the ferritin assembly reaction.

Time-Resolved Small-Angle X-ray Scattering Studies during the Aqueous Emulsion Polymerization of Methyl Methacrylate.

Recently, we reported time-resolved synchrotron small-angle X-ray scattering (TR-SAXS) studies during aqueous emulsion polymerization using a bespoke stirrable reaction cell (J. Am. Chem. Soc. 2021, 143, 1474-1484). This proof-of-concept study utilized a semifluorinated specialty monomer (2,2,2-trifluoroethyl methacrylate) to ensure high X-ray contrast relative to water. Herein, we extend this approach to emulsion polymerization of methyl methacrylate (MMA) in the presence or absence of sodium dodecyl sulfate (SDS) at 70 °C. Solution conductivity measurements for this anionic surfactant indicated a critical micelle concentration (CMC) of 10.9 mM at this temperature. Thus, SDS was employed at either 1.0 or 20.0 mM, which corresponds to well below or well above its CMC. Postmortem analysis by 1H NMR spectroscopy indicated MMA conversions of 93-95% for these three formulations. We demonstrate that the X-ray contrast between water and PMMA is sufficiently large to produce high-quality scattering patterns during TR-SAXS experiments. Such patterns were fitted using a hard-sphere scattering model to monitor the evolution in particle diameter. This enabled (i) determination of the time point for the onset of nucleation and (ii) the evolution in particle size to be monitored during the MMA polymerization. The final particle diameters obtained from such TR-SAXS studies were consistent with postmortem DLS analyses, while TEM studies confirmed that near-monodisperse latex particles were formed. Micellar nucleation occurs within just 2 min when the SDS concentration is well above its CMC, resulting in a high particle number concentration and relatively small latex particles. In contrast, when SDS is either absent or present below its CMC, particle nuclei are formed by homogeneous nucleation over significantly longer time scales (14-15 min). In the latter case, adsorption of SDS onto nascent particles reduces their coagulation, giving rise to a larger number of smaller particles compared to the surfactant-free polymerization. However, the characteristic time required for the onset of nucleation is barely affected because this is mainly controlled by the kinetics of homogeneous polymerization of the relatively water-soluble MMA monomer within the aqueous phase. These results suggest that the aqueous emulsion polymerization of several other (meth)acrylic monomers, and perhaps also vinyl acetate, may be amenable to TR-SAXS studies.

Chaotic advection mixer for capturing transient states of diverse biological macromolecular systems with time-resolved small-angle X-ray scattering

Chaotic advection mixer for capturing transient states of diverse biological macromolecular systems with time-resolved small-angle X-ray scattering

Lactoferricins impair the cytosolic membrane of Escherichia coli within a few seconds and accumulate inside the cell.

We report the real-time response of Escherichia coli to lactoferricin-derived antimicrobial peptides (AMPs) on length scales bridging microscopic cell sizes to nanoscopic lipid packing using millisecond time-resolved synchrotron small-angle X-ray scattering. Coupling a multiscale scattering data analysis to biophysical assays for peptide partitioning revealed that the AMPs rapidly permeabilize the cytosolic membrane within less than 3 s-much faster than previously considered. Final intracellular AMP concentrations of ∼80-100 mM suggest an efficient obstruction of physiologically important processes as the primary cause of bacterial killing. On the other hand, damage of the cell envelope and leakage occurred also at sublethal peptide concentrations, thus emerging as a collateral effect of AMP activity that does not kill the bacteria. This implies that the impairment of the membrane barrier is a necessary but not sufficient condition for microbial killing by lactoferricins. The most efficient AMP studied exceeds others in both speed of permeabilizing membranes and lowest intracellular peptide concentration needed to inhibit bacterial growth.