Time Division Multiple Access Research Articles

Medium access control protocol based on time division multiple access scheme for wireless body area network

In recent years, the demand for wireless body area network (WBAN) technology has increased, driven by advancements in medical and healthcare applications. WBAN consists of small, low-power, and heterogeneous sensor devices attached inside or outside the body for continuous health monitoring. Medium access control (MAC) is pivotal in addressing WBAN challenges by ensuring reliability and energy efficiency under a dynamic environment caused by body movement. Therefore, to tackle these challenges, this paper presents a MAC protocol based on time division multiple access (TDMA) to enhance the WBAN performance. The proposed TDMA-MAC protocol employs a one-periodic scheduled-based access method to provide reliable data transmission while satisfying the WBAN requirements. The proposed protocol is compared to the IEEE 802.15.6 MAC, enhanced packet scheduling algorithm MAC (EPSA-MAC), and concurrent MAC (C-MAC) protocols based on the performance metrics of packet delivery ratio (PDR), network throughput, energy consumption, and average delay. The simulation results show that the TDMA-MAC protocol outperforms its competitors as it could achieve up to 98% PDR, 30% enhanced throughput, 30% energy optimization, and 20% improvement in average delay.

UAV-Mounted RIS-Aided Mobile Edge Computing System: A DDQN-Based Optimization Approach

Unmanned aerial vehicles (UAVs) and reconfigurable intelligent surfaces (RISs) are increasingly employed in mobile edge computing (MEC) systems to flexibly modify the signal transmission environment. This is achieved through the active manipulation of the wireless channel facilitated by the mobile deployment of UAVs and the intelligent reflection of signals by RISs. However, these technologies are subject to inherent limitations such as the restricted range of UAVs and limited RIS coverage, which hinder their broader application. The integration of UAVs and RISs into UAV–RIS schemes presents a promising approach to surmounting these limitations by leveraging the strengths of both technologies. Motivated by the above observations, we contemplate a novel UAV–RIS-aided MEC system, wherein UAV–RIS plays a pivotal role in facilitating communication between terrestrial vehicle users and MEC servers. To address this challenging non-convex problem, we propose an energy-constrained approach to maximize the system’s energy efficiency based on a double-deep Q-network (DDQN), which is employed to realize joint control of the UAVs, passive beamforming, and resource allocation for MEC. Numerical results demonstrate that the proposed optimization scheme significantly enhances the system efficiency of the UAV–RIS-aided time division multiple access (TDMA) network.

Enhancing Quality of Service and Energy Efficiency in Wireless Sensor Networks through TDMA-Based Topology and Cross-Layer Approaches

It is necessary to continuously monitor the environment with the sensors in delay-sensitive wireless sensor network applications. The continuous monitoring operation results in higher energy consumption by the sensor nodes; wireless sensor networks are also subject to numerous difficulties, including latency, packet loss, and throughput. These are the most important constraints in wireless sensor networks (WSNs) and need to improve for better quality communication. In this research, quality of service is related to numerous systems that have very sensitive parameters such as end-to-end delay, packet loss, throughput, energy consumption, latency, and average delay. Therefore, it is necessary for the sensors to transmit reliable data within a reasonable timeframe. To find out better communication results, we have used the TDMA (Time Division Multiple Access) approaches in our paper to improve packet delivery ratio (PDR), latency, and throughput. The NS2 simulator is used to test communication between nodes. Latency, the packet delivery ratio (PDR) of transferring data packets, and throughput are measured. The TDMA approach is used in our proposed topology, and we can see a specific area where nodes are connected to communicate with one another. Each node is communicating with the other node using two different paths. Each node's bandwidth, latency, and PDR will be different. Hence, in one path, a TDMA approach is implemented, which results in improved node performance in terms of latency, packet delivery ratio, and bandwidth.

Resource allocation and passive beamforming for IRS‐assisted short packet systems

AbstractThis paper investigates an intelligent reflecting surface (IRS) assisted downlink short packet transmission system, where an access point sends short packets to multiple devices with the help of an IRS. Specifically, a performance comparison between the frequency division multiple access and time division multiple access is conducted for the considered system, from the perspective of average age of information (AoI). To minimize the maximum average AoI among all devices, the resource allocation and passive beamforming are jointly optimized. However, the formulated problem is difficult to solve due to the non‐convex objective function and coupled variables. Thus, an alternating optimization based algorithm is proposed by exploiting the semidefinite relaxation and bisection search techniques. Simulation results show that time division multiple access can achieve lower AoI by exploiting the time‐selective passive beamforming of IRS for maximizing the signal to noise ratio of each device consecutively. Moreover, it also shows that as the length of information bits becomes sufficiently large as compared to the available bandwidth, the proposed frequency division multiple access transmission scheme becomes more favourable due to more flexible power allocation.

Enhanced Clustering MAC Protocol Based on Learning Automata for UV Networks

Ultraviolet (UV) networks are widely applied in complex electromagnetic environments. Designing an efficient multi-node medium access control (MAC) protocol for these networks is important. In this study, we proposed an enhanced clustering time division multiple access (TDMA) MAC protocol based on clustering and learning automata (LA). Subsequently, the effects of the network topology, class of service, and number of cluster nodes on the network performance under the proposed protocol were analyzed. Then, the protocol was compared with the TDMA protocol and clustering system. Results revealed that it obtained a better network performance, proving its suitability for multi-node UV networking.

“Hybrid MAC Methodology for Improving the QOS in Fiber Wireless Network”

The Fi-Wi (Fiber-Wireless) approach stands out as a crucial element in the realm of networks, demonstrating superiority over various technologies. With the exponential growth in Internet users, significant strides have been made in the evolution of Fi-Wi networking systems in recent years. This mechanism offers broader bandwidth and network stability, ensuring high-speed connectivity with "Anytime Anywhere" availability for end users. However, the escalating energy demand in networking systems poses a constraint on the network's lifespan, impacting transmission.
 Over the years, researchers have proposed and tested various Media Access Control (MAC) protocols to address transmission and energy consumption issues. Despite these efforts, existing protocols have encountered challenges such as overheating, delays, throughput issues, and collisions. This research paper introduces a combination of Time Division Multiple Access (TDMA) and Carrier Sense Multiple Access (CSMA) to tackle associated challenges. The primary objective is to enhance throughput and reduce delays in Fi-Wi networks.
 To achieve this goal, the study employs techniques that involve and Utilizing an Orthogonal Frequency Division Multiplexing (OFDM) modulator, a free-space optical (FSO) communication channel, an OFDM demodulator, and Opti-system for the analysis and enhancement of received signals, our study demonstrates that the proposed MAC protocol surpasses conventional MAC protocols in terms of delay, data throughput, and transmission efficiency.

Performance Evaluation of Collision Avoidance for Multi-node LoRa Networks based on TDMA and CSMA Algorithm

LoRa can be used as the communication technology for the intelligent monitoring system. However, LoRa is usually used for outdoor communication. The usage of LoRa as indoor communication has many challenges. One of the challenges is that collision happens when using standard LoRa devices with only one channel. The algorithms based on TDMA (Time-division Multiple Access) and CSMA (Carrier-sense Multiple Access) protocols can be used to address this challenge. These two algorithms can be modified by applying the device that is the center of the network (gateway) as a central control and the data transmitter (sensor node) as a passive device. The test was conducted on the Intelligent Laboratory Monitoring System to evaluate this design on a multi-node LoRa network. RSSI testing proves that the distance and building interference affect the signal strength or RSSI of sensor nodes, so the average RSSI value is -73.75 with an RSSI threshold of value -106. The gateway successfully collected each sensor node data with an average success of about 64.953%. The experiment results show the success rate of the CSMA-based algorithm is 10% versus 100% in TDMA-based algorithm; the delay is 4125 ms for CSMA-based and 428.3 ms for TDMA-based. This result means that the CSMA-based algorithm is more complex, takes more time to process the data than the TDMA-based algorithm, has a low success rate, and is more prone to collisions.

“Hybrid MAC Methodology for Improving the Qos in Fiber Wireless Network”

The Fi-Wi (Fiber-Wireless) approach stands out as a crucial element in the realm of networks, demonstrating superiority over various technologies. With the exponential growth in Internet users, significant strides have been made in the evolution of Fi-Wi networking systems in recent years. This mechanism offers broader bandwidth and network stability, ensuring high-speed connectivity with "Anytime Anywhere" availability for end users. However, the escalating energy demand in networking systems poses a constraint on the network's lifespan, impacting transmission.
 Over the years, researchers have proposed and tested various Media Access Control (MAC) protocols to address transmission and energy consumption issues. Despite these efforts, existing protocols have encountered challenges such as overheating, delays, throughput issues, and collisions. This research paper introduces a combination of Time Division Multiple Access (TDMA) and Carrier Sense Multiple Access (CSMA) to tackle associated challenges. The primary objective is to enhance throughput and reduce delays in Fi-Wi networks.
 To achieve this goal, the study employs techniques that involve and Utilizing an Orthogonal Frequency Division Multiplexing (OFDM) modulator, a free-space optical (FSO) communication channel, an OFDM demodulator, and Opti-system for the analysis and enhancement of received signals, our study demonstrates that the proposed MAC protocol surpasses conventional MAC protocols in terms of delay, data throughput, and transmission efficiency.

Enhanced collaborative networking protocol based on clustering mechanism for UV networks

Developing a highly efficient multi-node media access control protocol tailored for ultraviolet (UV) networks poses a significant challenge. While our team's UV random-access collaborative networking protocol, utilizing time-division multiple access (UVCN-TDMA), has been instrumental, its scalability is hindered by the number of network nodes. To address this limitation and facilitate large-scale UV node networking, this study advances the UVCN protocol by introducing an enhanced collaborative networking protocol known as the enhanced collaborative clustering mechanism (eCOCM). This study examined the impact of network topology, various data services, and the number of cluster nodes on network performance within the proposed eCOCM framework. Additionally, a comparative analysis between the eCOCM protocol and conventional clustering systems was conducted. The findings demonstrate notable enhancements across key performance metrics including throughput, packet loss rate, delay, and channel utilization. Finally, functional experiments were conducted under two distinct network scenarios to validate the efficacy of the proposed protocol. This study addresses the immediate challenges in UV multi-node networking and offers pragmatic insights to steer its development forward.

Sustainable optimizing WMN performance through meta-heuristic TDMA link scheduling and routing

Wireless mesh networks (WMNs) have become a popular solution for expanding internet service and communication in both urban and rural areas. However, the performance of WMNs depends on generating optimized time-division multiple access (TDMA) schedules, which distribute time into a list of slots called superframes. This study proposes novel meta-heuristic algorithms to generate TDMA link schedules in WMNs using two different interference/constraint models: multi-transmit-receive (MTR) and full-duplex (FD). The objectives of this study are to optimize the TDMA frame for packet transmission, satisfy the constraints, and minimize the end-to-end delay. The significant contributions of this study are: (1) proposing effective and efficient heuristic solutions to solve the NP-complete problem of generating optimal TDMA link schedules in WMNs; (2) investigating the new FD interference model to improve the network capacity above the physical layer. To achieve these objectives and contributions, the study uses two popular meta-heuristics, the artificial bee colony (ABC) and/or genetic algorithm (GA), to solve the known NP-complete problems of joint scheduling, power control, and rate control. The results of this study show that the proposed algorithms can generate optimized TDMA link schedules for both MTR and FD models. The joint routing and scheduling approach further minimizes end-to-end delay while maintaining the schedule's minimum length and/or maximum capacity. The proposed solution outperforms the existing solutions in terms of the number of active links, end-to-end delay, and network capacity. The research aims to improve the efficiency and effectiveness of WMNs in most applications that require high throughput and fast response time.

Multiobjective-energy centric honey badger optimization based routing for wireless body area network

Wireless Body Area Network (WBAN) is an interconnection of tiny biosensors that are organized in/on several parts of the body. The developed WBAN is used to sense and transmit health-related data over the wireless medium. Energy efficiency is the primary challenges for increasing the life expectancy of the network. To address the issue of energy efficiency, one of the essential approaches i.e., the selection of an appropriate relay node is modelled as an optimization problem. In this paper, energy efficient routing optimization using Multiobjective-Energy Centric Honey Badger Optimization (M-ECHBA) is proposed to improve life expectancy. The proposed M-ECHBA is optimized by using the energy, distance, delay and node degree. Moreover, the Time Division Multiple Access (TDMA) is used to perform the node scheduling at transmission. Therefore, the M-ECHBA method is used to discover the optimal routing path for enhancing energy efficiency while minimizing the transmission delay of WBAN. The performances of the M-ECHBA are analyzed using life expectancy, dead nodes, residual energy, delay, packets received by the Base Station (BS), Packet Loss Ratio (PLR) and routing overhead. The M-ECHBA is evaluated with some classical approaches namely SIMPLE, ATTEMPT and RE-ATTEMPT. Further, this M-ECHBA is compared with the existing routing approach Novel Energy Efficient hybrid Meta-heuristic Approach (NEEMA), hybrid Particle Swarm Optimization-Simulated Annealing (hPSO-SA), Energy Balanced Routing (EBR), Threshold-based Energy-Efficient Routing Protocol for physiological Critical Data Transmission (T-EERPDCT), Clustering and Cooperative Routing Protocol (CCRP), Intelligent-Routing Algorithm for WBANs namely I-RAW, distributed energy-efficient two-hop-based clustering and routing namely DECR and Modified Power Line System (M-POLC). The dead nodes of M-ECHBA for scenario 3 at 8000 rounds are 4 which is less when compared to the dead nodes of EBR.

Deterministic Scheduling Algorithm Based on Proportional Conflict and Deadline in Industrial Wireless Networks

<p>Deterministic scheduling technology is of great significance for the real-time and deterministic transmission of industrial wireless network data. In view of the fact that the industrial wireless network data stream itself has priority classification attribute, this paper, based on multi-channel time-division multiple access (TDMA) technology, analyzes link conflict delay and channel contention delay caused by high priority data stream to low priority data stream, and performs scheduling preprocessing on the network, so as to eliminate the network with unreasonable parameters, and feedback to the network manager. For preprocessed networks, the scheduling algorithm prioritizes the allocation of time slots and channel resources for links of high priority data streams, while for data streams belonging to the same priority class, a scheduling scheme based on Maximum Proportional Conflict and Deadline First (MPC-D) is proposed. Under the premise of meeting schedulability conditions, time slots and channel resources are allocated sequentially according to the proportional conflict deadline values of each link, from largest to smallest. The experimental results show that the proposed scheduling algorithm can achieve a high network scheduling success rate.</p> <p> </p>

On the time complexity of achieving optimal throughput in time division multiple access communication networks

<abstract><p>The fundamental problem of finding transmission schedules for achieving optimal throughput in time division multiple access (TDMA) communication networks is known to be NP-hard. Let $ \mathcal{N} $ be a scheduled $ k $-time slot TDMA network with $ n $ stations and $ m $ links. We showed that an optimal link schedule for $ \mathcal{N} $ can be computed recursively with a recursion tree of logarithmic depth $ \mathcal{O}(\ln m) $ in expectation. Additionally, we showed that optimal link schedules for those TDMA networks, with recursion trees of depth meeting the expectation, can be found in time $ \mathcal{O}(m^{2+\ln k}) $. Likewise, we discuss analogous results for computing optimal station schedules of TDMA networks.</p></abstract>

A 0.00179 mm2/Ch Chopper-Stabilized TDMA Neural Recording System with Dynamic EOV Cancellation and Predictive Mixed-Signal Impedance Boosting.

This article presents a digitally-assisted multi-channel neural recording system. The system uses a 16-channel chopper-stabilized Time Division Multiple Access (TDMA) scheme to record multiplexed neural signals into a single shared analog front end (AFE). The choppers reduce the total integrated noise across the modulated spectrum by 2.4× and 4.3× in Local Field Potential (LFP) and Action Potential (AP) bands, respectively. In addition, a novel impedance booster based on Sign-Sign least mean squares (LMS) adaptive filter (AF) predicts the input signal and pre-charges the AC-coupling capacitors. The impedance booster module increases the AFE input impedance by a factor of 39× with a 7.1% increase in area. The proposed system obviates the need for on-chip digital demodulation, filtering, and remodulation normally required to extract Electrode Offset Voltages (EOV) from multiplexed neural signals, thereby achieving 3.6× and 2.8× savings in both area and power, respectively, in the EOV filter module. The Sign-Sign LMS AF is reused to determine the system loop gain, which relaxes the feedback DAC accuracy requirements and saves 10.1× in power compared to conventional oversampled DAC truncation-error ΔΣ-modulator. The proposed SoC is designed and fabricated in 65 nm CMOS, and each channel occupies 0.00179 mm2 of active area. Each channel consumes 5.11 μW of power while achieving 2.19 μVrms and 2.4 μVrms of input referred noise (IRN) over AP and LFP bands. The resulting AP band noise efficiency factor (NEF) is 1.8. The proposed system is verified with acute in-vivo recordings in a Sprague-Dawley rat using parylene C based thin-film platinum nanorod microelectrodes.

RIS-Assisted Cooperative Time-Division Multiple Access.

Reconfigurable intelligent surface-aided communication systems have been intensively investigated to improve capacity, coverage, and energy efficiency via optimal controlling of phase shifts for passive reflecting elements. However, there are few studies on cooperative transmission incorporating RIS in TDMA systems, because RIS reflects all the incident signals, and it inadvertently leads to a boost in interference signals. In this paper, we propose RIS-assisted cooperative time-division multiple access, in which the required SINR of all users is guaranteed as much as possible by opportunistic use of RIS for cooperative transmission. The proposed scheme's primary function is that some time slots, i.e., cooperative time slots, serve a pair of users, i.e., a strong- and a weak-channel-conditioned user, using RIS. To support this functionality, we propose scheduling for non-cooperative and cooperative time slots, user pairing for scheduled cooperative time slots, and transmit beamforming vector design for the pair of UEs in each cooperative time slot. The simulation and numerical results demonstrate that the proposed scheme guarantees QoS for all UE as much as possible and minimizes the remaining required capacity indicating the amount of capacity that was not achieved compared with the required capacity.

Beyond Wi-Fi 7: Spatial reuse through multi-AP coordination

Wi-Fi 7, based on the IEEE 802.11be amendment, is designed to increase the maximum achievable throughput, expand the range of operating frequencies, and improve latency and jitter in worst-case scenario. In the context of the discussions to shape what Wi-Fi 8 will be, the IEEE 802.11 WG is evaluating multi-AP coordination as a strategy to further improve network performance in several aspects. MAC-driven multi-AP coordination strategies include coordinated Orthogonal Frequency Division Multiple Access (c-OFDMA), coordinated Time Division Multiple Access (c-TDMA), and coordinated Spatial Reuse (c-SR). In c-OFDMA, a set of APs transmit during a Transmission Opportunity on different channels, whereas in c-TDMA, the APs take turns transmitting on the same channel during a Transmission Opportunity. Instead, in c-SR, a set of APs transmit simultaneously on the same channel and during the same Transmission Opportunity.In this paper, we focus on c-SR. We introduce a c-SR interference model and present a strategy based on the proposed model for estimating groups of APs that can transmit successfully simultaneously. We implemented the proposed approach in the multi-AP coordination framework of ns-3 that we developed to analyze c-TDMA. We then thoroughly evaluate the performance of the proposed c-SR scheme via ns-3 simulations. The proposed scheme allows increasing the system throughput of a dense deployment up to 2.3 times as well as substantially reducing the Head of Line delay.

Low-cost and high-performance channel access strategies for Internet of Nano-Things applications

Nanodevices, which are only a few nanometers (nm) in size, are interconnected to form the Internet of Nano-Things (IoNT) that performs complex operations. One of the key challenges is ensuring efficient channel access control for nanodevices, especially when dealing with large network sizes. Medium access control (MAC) protocols serve this purpose, but traditional approaches are not practical due to the inherent constraints of nanodevices. In this paper, we propose two novel MAC protocols for IoNT applications. The first protocol, Slot Assignment-Based (SAB) MAC, is a contention-free method relying on scheduling. In contrast to its counterparts, it enables simultaneous packet transmission through Time Spread On-Off Keying (TS-OOK), effectively minimizing the collision probability and end-to-end delay. The second protocol, Receiver-Initiated and Directed (RID) MAC, adopts a contention-based approach to reduce unnecessary transmissions caused by flooding. It achieves this by limiting the number of active nanodevices within a time interval using directional antennas without incurring scheduling overhead. We evaluated the performance of these protocols through comprehensive simulations, comparing them with counterparts in terms of packet transmission success, energy consumption, end-to-end delay and setup overhead. In dense topologies, SAB-MAC outperforms Transparent (TRN) MAC by approximately twice the packet transmission success reaching up to 95.73%. It accomplishes this with 1000 times lower end-to-end delay and reduced setup overhead than Time Division Multiple Access (TDMA). Conversely, RID-MAC achieves twice the packet transmission success of TRN-MAC and ten times that of unicast-based methods, all with lower end-to-end delay and nearly equivalent energy consumption. Consequently, due to its superior performance SAB-MAC is the optimal choice for communication between nanorouters (NRs). However, RID-MAC is more suitable for communication between nanosensors (NSs), as it incurs no setup overhead.

Energy optimization for full-duplex wireless-powered IoT networks using rotary-wing UAV with multiple antennas

In this paper, we propose a novel design for the rotary-wing unmanned aerial vehicle (UAV)-enabled full-duplex (FD) wireless-powered Internet of Things (IoT) networks. In this network, the UAV is equipped with an antenna array, and the K IoT sensors, which are distributed randomly, use single-antenna to communicate. By sending the energy, the UAV as a hybrid access point, charges the sensors and collects information from them. Then, to manage the time and optimize the energy, the sensors are divided into N groups, so that the UAV equipped with multi-input multi-output (MIMO) technology can serve the sensors in a group, during the total time T. We provide a simple implementation of the wireless power transfer protocol in the sensors by using the time division multiple access (TDMA) scheme to receive information from the users. In other words, the sensors of each group receive energy from the UAV, when it hovers over the sensors of the previous group, and also when the UAV flies over the previous group to the current group. The sensors of each group send their information to the UAV, when the UAV is hovering over their group. Under these assumptions, we formulate two optimization problems: a sum throughput maximization problem, and a total time minimization problem. Numerical results show that our proposed optimal network provides better performance than the existing networks. In fact, our novel design can serve more sensors at the cost of using more antennas compared to that of the conventional networks.

Design of routing protocol for enhancing quality of service in wireless ad hoc and sensor netw ork: LEQA

<p>Wireless sensor networks (WSNs) are now adopting mobile sensors due to their increased popularity in research and industry. To enhance WSNs' performance, mobility can be utilized to gather data. But, if the collector's route is fixed and movement is not manageable, current quality of service (QoS) strategies and protocols are ineffective in achieving timely data delivery while maintaining energy efficiency. In the real world, WSN networks use both actuator - actuator and sensor - actuator coordination. To conserve energy in communicati on tasks with heavy traffic and high volume, sensors/actuators can be relocated to desired locations. This study introduces a routing protocol that optimizes delivery latency and energy conservation in WSNs. The proposed latency, energy, and quality of ser vice aware (LEQA) protocol uses a cooperative approach to track the sink and coordinate communication between sensors and actuators. Each sensor schedules its time division multiple access (TDMA) to improve QoS metrics such as low energy consumption, low l atency, or packet loss. It also addresses sensor - actuator coordination and proposes a data communication protocol for efficient and fast communication with actuator nodes. This reduces energy consumption and minimizes latency.</p>

Exploiting Propagation Delay in Underwater Acoustic Communication Networks via Deep Reinforcement Learning.

This article proposes a novel deep-reinforcement learning-based medium access control (DL-MAC) protocol for underwater acoustic networks (UANs) where one agent node employing the proposed DL-MAC protocol coexists with other nodes employing traditional protocols, such as time division multiple access (TDMA) or q -Aloha. The DL-MAC agent learns to exploit the large propagation delays inherent in underwater acoustic communications to improve system throughput by either a synchronous or an asynchronous transmission mode. In the sync-DL-MAC protocol, the agent action space is transmission or no transmission, while in the async-DL-MAC, the agent can also vary the start time in each transmission time slot to further exploit the spatiotemporal uncertainty of the UANs. The deep Q -learning algorithm is applied to both sync-DL-MAC and async-DL-MAC agents to learn the optimal policies. A theoretical analysis and computer simulations demonstrate the performance gain obtained by both DL-MAC protocols. The async-DL-MAC protocol outperforms the sync-DL-MAC protocol significantly in sum throughput and packet success rate by adjusting the transmission start time and reducing the length of time slot.