Time-dependent Density Functional Theory Study Research Articles

Reduction reactions at the interface between CdS quantum dot and Z-type ligands driven by electron injection in the electroluminescent processes.

The efficient and stable electroluminescence of quantum dots (QDs) is of great importance in their applications in new display technologies. The short service life of blue QDs, however, hinders their development and commercialization. Different mechanisms have been proposed for the destabilization of QDs in electroluminescent processes. Based on real-time time-dependent density functional theory studies on the QD models covered by Z-type ligands (XAc2, X = Cd, Zn, Mg), the structural evolution is simulated to reveal the mechanism of the reduction reactions induced by electron injection. Our simulations reproduce the experimental observations that the reduction reactions occur at the QD-ligand interface, and the reduced Cd atom is almost in a zero valence state. However, different sites are predicted for the reactions in which the surface metal atom of the QD instead of the metal atom in the ligands is reduced. As a result, one of the arms of the chelate ligand leaves the QD, which tends to cause damage to its electroluminescent performance. Our findings contribute to a mechanistic understanding of the reduction reactions that occurred at the QD-ligand interface.

Reduction reactions at the interface between CdS quantum dot and Z-type ligands driven by electron injection in the electroluminescent processes.

The efficient and stable electroluminescence of quantum dots (QDs) is of great importance in their applications in new display technologies. The short service life of blue QDs, however, hinders their development and commercialization. Different mechanisms have been proposed for the destabilization of QDs in electroluminescent processes. Based on real-time time-dependent density functional theory studies on the QD models covered by Z-type ligands (XAc2, X = Cd, Zn, Mg), the structural evolution is simulated to reveal the mechanism of the reduction reactions induced by electron injection. Our simulations reproduce the experimental observations that the reduction reactions occur at the QD-ligand interface, and the reduced Cd atom is almost in a zero valence state. However, different sites are predicted for the reactions in which the surface metal atom of the QD instead of the metal atom in the ligands is reduced. As a result, one of the arms of the chelate ligand leaves the QD, which tends to cause damage to its electroluminescent performance. Our findings contribute to a mechanistic understanding of the reduction reactions that occurred at the QD-ligand interface.

Computer-aided drug design supporting sunscreen research: a showcase study using previously synthesized hybrid UV filter-antioxidant compounds.

Although quantum mechanical calculations have proven effective in accurately predicting UV absorption and assessing the antioxidant potential of compounds, the utilization of computer-aided drug design (CADD) to support sustainable synthesis research of new sunscreen active ingredients remains an area with limited exploration. Furthermore, there are ongoing concerns about the safety and effectiveness of existing sunscreens. Therefore, it remains crucial to investigate photoprotection mechanisms and develop enhanced strategies for mitigating the harmful effects of UVR exposure, improving both the safety and efficacy of sunscreen products. A previous study conducted synthesis research on eight novel hybrid compounds (I-VIII) for use in sunscreen products by molecular hybridization of trans-resveratrol (RESV), avobenzone (AVO), and octinoxate (OMC). Herein, time-dependent density functional theory (TD-DFT) calculations performed in the gas phase on the isolated hybrid compounds (I-VIII) proved to reproduce the experimental UV absorption. Resveratrol-avobenzone structure-based hybrids (I-IV) present absorption maxima in the UVB range with slight differences between them, while resveratrol-OMC structure-based hybrids (V-VIII) showed main absorption in the UVA range. Among RESV-OMC hybrids, compounds V and VI exhibited higher UV absorption intensity, and compound VIII stood out for its broad-spectrum coverage in our simulations. Furthermore, both in silico and in vitro analyses revealed that compounds VII and VIII exhibited the highest antioxidant activity, with compound I emerging as the most reactive antioxidant within RESV-AVO hybrids. The study suggests a preference for the hydrogen atom transfer (HAT) mechanism over single-electron transfer followed by proton transfer (SET-PT) in the gas phase. With a strong focus on sustainability, this approach reduces costs and minimizes effluent production in synthesis research, promoting the eco-friendly development of new sunscreen active ingredients. The SPARTAN'20 program was utilized for the geometry optimization and energy calculations of all compounds. Conformer distribution analysis was performed using the Merck molecular force field 94 (MMFF94), and geometry optimization was carried out using the parametric method 6 (PM6) followed by density functional theory (DFT/B3LYP/6-31G(d)). The antioxidant behavior of the hybrid compounds (I-VIII) was determined using the highest occupied molecular orbital (εHOMO) and the lowest unoccupied molecular orbital (εLUMO) energies, as well as the bond dissociation enthalpy (BDE), ionization potential (IP), and proton dissociation enthalpy (PDE) values, all calculated at the same level of structural optimization. TD-DFT study is carried out to calculate the excitation energy using the B3LYP functional with the 6-31G(d) basis set. The calculated transitions were convoluted with a Gaussian profile using the Gabedit program.

Time-dependent density-functional theory study on nonlocal electron stopping for inertial confinement fusion

Understanding laser–target coupling is of the utmost importance for achieving high performance in laser-direct-drive (LDD) inertial confinement fusion (ICF) experiments. Thus, accurate modeling of electron transport and deposition through ICF-relevant materials and conditions is necessary to quantify the total thermal conduction and ablation. The stopping range is a key transport quantity used in thermal conduction models; in this work, we review the overall role that the electron mean free path (MFP) plays in thermal conduction and hydrodynamic simulations. The currently used modified Lee–More model employs various physics approximations. We discuss a recent model that uses time-dependent density functional theory (TD-DFT) to eliminate these approximations in both the calculation of the electron stopping power and corresponding MFP in conduction zone polystyrene (CH) plasma. In general, the TD-DFT calculations showed a larger MFP (lower stopping power) than the standard modified Lee–More model. Using the TD-DFT results, an analytical model for the electron deposition range, λTD−DFT(ρ,T,K), was devised for CH plasmas between ρ=[0.05−1.05] g/cm3, kBT=[100−1000] eV. We implemented this model into LILAC, for simulations of a National Ignition Facility-scale LDD implosion and compared key physics quantities to ones obtained by simulations using the standard model. The implications of the obtained results and the path moving forward to calculate this same quantity in conduction-zone deuterium–tritium plasmas are further discussed, to hopefully close the understanding gap for laser target coupling in LDD-ICF simulations.

Excited-state antioxidant capacity of Flavonoids based on solvent effect: A TD-DFT study

Antioxidants have caught a widespread attention because of their applications in various fields such as biomedicine, food additives, cosmetics, and so on, but nevertheless studies on the antioxidant capacity of molecules after photoexcitation are still scarce and rare. In this work, by the application of the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods, based on the solvent effect, the antioxidant capacity of 4′-Hydroxyflavone (4′-HF), 6-Hydroxyflavone (6-HF), and 7-Hydroxyflavone (7-HF) in the S0 and S1 states are compared. In view of the frontier molecular orbitals (FMOs), depending on the HOMO energy, not only is it analyzed that the electron-donating capacity varies with the solvent, but also that the antioxidant capacity of the mostly molecules in the S1 state is better than those in the S0 state, in particular, the 6-HF in ACN in the S1 state shows a strong antioxidant capacity and is most susceptible to attack by electrophilic radicals, which is also in accordance with the conclusions drawn from the orbital weighted (OW) Fukui functions and OW double descriptors, and global indices including vertical ionization potentials (VIPs), softness (S),and so on. Moreover, absorption spectra indicate the potential of these molecules to resist UV radiation and diminished or even quenched fluorescence intensity is caused by intramolecular charge transfer as evidenced by hole-electron analysis. On the basis of the above photophysical properties, it is shown that these three molecules are expected to be one of the ingredients of sunscreens. In a nutshell, this work not only proposed the influence of solvent effect on antioxidant capacity, but also found the advantage of antioxidant capacity in the S1 state, which provides a strong support for exploring stronger antioxidant capacity.

The role of secondary donor in thiophene-based azo dyes for dye-sensitized solar cells and non-linear optics

The effect of altering the donating strength of secondary donors at the 4th position of the thiophene ring in a series of dyes labeled AB1 to AB9 is investigated in this study. According to the findings, the orientation of the secondary donor has a considerable impact on molecular planarity, resulting in changes in charge transfer (CT) properties within the thiophene-azo-benzoic acid backbone. The time-dependent density functional theory (TD-DFT) study supports these findings, indicating that the vertical absorption maximum of the dyes increases with the secondary donor's donating strength. From AB1 to AB5, photovoltaic parameters show an increase in DSSC performance. Furthermore, dye@TiO2 cluster experiments suggest the possibility of these dyes interacting with TiO2, resulting in red-shifted absorbance of dye@TiO2 clusters.Theoretical predictions are confirmed by the synthesis of AB1 to AB4, with initial absorption in dimethylformamide (DMF) and energies of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) following a similar pattern as observed in density functional theory (DFT) studies. TGA results show that AB1 to AB4 have remarkable thermal stability, enabling their practical application in DSSCs. The efficiencies of the constructed DSSCs varied, with AB4 having the highest (1.90 ± 0.1) and AB1 having the lowest (1.29 ± 0.1). Secondary donors play a critical role in determining molecular characteristics and device performance, according to the theoretical and experimental DSSC results.

Intramolecular Charge Transfer and Stimuli-Responsive Emission in Cholesterol-Appended Phenothiazine-Cyanostyryl-Based Donor-Acceptor Systems.

Organic fluorescent molecules have received considerable attention owing to their various optoelectronic applications. Herein, we report the design and synthesis of two cholesterol-functionalized cyanostyrene-phenothiazine-based D-π-A systems that are emissive in both the solution and solid states. The newly synthesized cholesterol-appended phenothiazine-cyanostyrene diads PTCS-1 and PTCS-2 vary in the N-alkylation of phenothiazine, respectively, with─octyl and─hexyl chains. Both molecules are highly fluorescent and show reasonably good quantum yields in nonpolar solvents because of twisted intramolecular charge transfer (TICT). The molecules exhibit aggregation-induced emission in the solid state. Due to the presence of flexible alkyl chains in the phenothiazine and cholesterol moieties, PTCS-1 and PTCS-2 show mechanochromic luminescence switching in response to external shear stress and emission recovery under methanol vapor. Powder X-ray diffraction studies prove that the emission switching on the applied stimuli in both PTCS-1 and PTCS-2 is attributed to the reversible transformation between the crystalline and amorphous states. Time-dependent density functional theory (TD-DFT) studies are carried out to gain insight into the ICT interactions. TD-DFT analysis at the TD-M06-2X/def2-TZVP level further revealed that in both molecules, the lowest unoccupied molecular orbital (LUMO) + 2, LUMO, highest occupied molecular orbital (HOMO), and HOMO - 1 orbitals are responsible for the charge transfer interactions. These ICT interactions are identified as π-π* type interactions.

Comparative study of natural and synthetic dyes in DSSCs: An experimental and computational approach

This study explores the natural and synthetic dyes as sensitizers for dye-sensitized solar cells (DSSCs). Anthocyanin dye extract (PG) from pomegranate (Punica granatum) fruit, betanin pigment (BR) from beetroot (Beta vulgaris), and the commercially available organic dye, Rose Bengal (RB), were investigated as sensitizers for DSSCs and their photovoltaic performances were recorded. Density functional theory (DFT) and time-dependent DFT (TD-DFT) studies have also been performed in order to get insight into the photophysical and photoelectrochemical properties. The overall efficiencies (η) of 0.34%, 0.30%, and 0.25% were obtained for the PG, BR, and RB dyes under 1 sun illumination, respectively. The results infer that PG dye would act as a promising photo-sensitizer for DSSCs as compared to BR and RB sensitizers, which may be due to better interaction between anthocyanin molecule of pomegranate extract and TiO2.

TDDFT Study on the ESIPT Properties of 2-(2'-Hydroxyphenyl)-Benzothiazole and Sensing Mechanism of a Derived Fluorescent Probe for Fluoride Ion.

The level of fluoride ions (F-) in the human body is closely related to various pathological and physiological states, and the rapid detection of F- is important for studying physiological processes and the early diagnosis of diseases. In this study, the detailed sensing mechanism of a novel high-efficiency probe (PBT) based on 2-(2'-hydroxyphenyl)-benzothiazole derivatives towards F- has been fully investigated based on density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods. F- attacks the O-P bond of PBT to cleavage the dimethylphosphinothionyl group, and the potential products were evaluated by Gibbs free energy and spectroscopic analyses, which ultimately identified the product as HBT-Enol1 with an intramolecular hydrogen bond. Bond parameters, infrared vibrational spectroscopy and charge analysis indicate that the hydrogen bond is enhanced at the excited state (S1), favoring excited state intramolecular proton transfer (ESIPT). The mild energy barrier further evidences the occurrence of ESIPT. Combined with frontier molecular orbital (FMO) analysis, the fluorescence quenching of PBT was attributed to the photoinduced electron transfer (PET) mechanism and the fluorescence turn-on mechanism of the product was attributed to the ESIPT process of HBT-Enol1.

Removal of caffeine from aqueous and vacuum environments using Si12C12, Si11GeC12, Si11BC12 fullerenes: A DFT and TDDFT studies

Caffeine (CFI) adsorption upon the perfect, boron-doped (Si11BC12 and Si12BC11), and germanium-doped (Si11GeC12 and Si12GeC11) silicon carbide (SiC) fullerenes have been studied to assess the feasibility of caffeine removal from aqueous and vacuum environments by using density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations. The adsorption energy and charge transfer of caffeine through its nitrogen atom of the imidazole ring upon the surface of Si12C12 nano-cage is stronger than that of the oxygen atoms of the pyrimidinedione ring with moderate adsorption energy. The theoretical infrared (IR) spectrum shows that the vibrational frequency of CFI changes after interacting with the pure Si12C12 fullerene, and this change is comparable to the experimental data. According to the TDDFT method, Ultraviolet–Visible (UV–Vis) techniques reveal that the optical features of the pure, Si11BC12, Si11GeC12 fullerenes changed after interacting with CFI. The density of state (DOS) analysis confirmed that the caffeine adsorption via imidazole ring with a robust electron hybridization can be remarkably altered the electronic features of Si12C12 fullerene, being too sensitized to the binding of caffeine. The results demonstrate that CFI adsorption on Si12C12 is stronger than on Si11BC12 and Si11GeC12 fullerenes. The presence of a boron (B) atom in the Si11BC12 fullerene improves the dipole moment and optical properties as compared to the Si11GeC12 fullerene. Upon caffeine adsorption, the Si12C12 and Si12BC11 fullerenes could be promising adsorbents for caffeine removal and detection because of the strong interaction, increasing dipole moment, and short recovery time.

Boosting the Performance of Diketopyrrolopyrrole-Triphenylamine-Based Organic Solar Cells via π-Linker Engineering.

The design and development of novel and efficient donor-π-acceptor (D-π-A) type conjugated systems has attracted substantial interest in the field of organic electronics owing to their intriguing properties. In this paper, we have designed seven new and efficient D-π-A type conjugated systems (M1-M7) by a variety of π-linkers with triphenylamine (TPA) as the electron donor and diphenyldiketopyrrolopyrrole (DPP) as the electron acceptor using density functional theory (DFT) formalism for organic solar cells (OSCs). The π-linker has been substituted between the donor and acceptor for efficient electron transfer. Here, our primary focus is on narrowing the highest occupied molecular orbital-lowest unoccupied molecular orbital gaps, electronic transition, charge transfer rate, reorganization energies, and the theoretical power conversion efficiencies (PCEs). Our study reveals that the designed compounds exhibit excellent charge transfer rates. The absorption properties of the compounds have been examined using the time-dependent density functional theory (TD-DFT) method. The TD-DFT study shows that compound M2 possesses the highest absorption maxima with a maximum bathochromic shift. For a better understanding of the electron transport process of our designed compounds, we have designed donor/acceptor (D/A) blends, and each of the developed blends (FREA/M1-M7) can encourage charge carrier separation. According to the photovoltaic performance of the D/A blends, compound FREA-M2, which has a theoretical PCE of 16.53%, is the most appealing choice for use in OSCs. We expect that by thoroughly examining the relationship between structure, characteristics, and performance, this work will serve as a roadmap for future research and development of TPA-DPP-based photovoltaic materials.

Exploring the Theoretical Foundations of Thermally Activated Delayed Fluorescence (TADF) Emission: A Comprehensive TD-DFT Study on Phenothiazine Systems.

This study conducts a thorough theoretical investigation of Thermally Activated Delayed Fluorescence (TADF) in phenothiazine-based systems, examining ten molecular configurations recognized experimentally as TADF-active. Employing Time-Dependent Density Functional Theory (TD-DFT), our analysis spans the investigation of singlet-triplet energy gaps (ΔEST), spin-orbit coupling, and excitation characteristics using Multiwfn. This approach not only validates the adherence to El Sayed's rule across these systems but also provides a detailed understanding of charge transfer dynamics, as visualized through heat maps. A significant aspect of our study is the exploration of different oxidation states of sulfur and site substitutions on phenothiazine. This systematic variation aims to identify additional TADF-active compounds, drawing parallels with properties characterizing other known TADF emitters. Our investigation into Reverse Intersystem Crossing (rISC) rates and the analysis of dihedral angles in relation to ΔEST values offer nuanced insights into the TADF behaviours of these molecules. By integrating rigorous computational analysis with practical implications, we provide a foundational understanding that enhances the design and optimization of phenothiazine-based materials for optoelectronic applications. This work not only advances our theoretical understanding of TADF in phenothiazine derivatives but also serves as a guide for experimentalists and industry professionals in the strategic design of new TADF materials.

A novel nickel(II) complex with N,S donor Schiff base: Structural characterisation, DFT, TD-DFT study and catalytic investigation.

One new mononuclear nickel(II) thiosemicarbazone complex (1), has been synthesised from the Schiff base ligand derived from p-anisaldehyde and thiosemicarbazide. Complex 1 is characterized by using different spectroscopic techniques and single crystal X-ray structure analysis. Time dependent density functional theory (TD-DFT) was performed to simulate the electronic spectra of the complex 1 with the help of Polarizable Continuum Model (PCM) model. Complex 1 acts as functional models. The catalytic property has been evaluated from Lineweaver-Burk plot using the Michaelis-Menten approach of enzyme catalysis with a kcat value of the order of 708 h-1.

Design and analysis of benzene fused conjugated molecules for organic Photovoltaics: A TD-DFT study on electronic and quantum chemical properties

In this work, fifteen different benzene fused conjugated molecules were designed and analyzed by comparing their properties using TD-DFT (time dependent density functional theory) with a basic set of B3LYP/6-311G(d,p) for organic photovoltaics. The core molecules used were benzodioxazole, benzodioxole, benzodithiazole, benzofurazan and benzotriazole. Optimized geometry and electronic properties such as HOMO, LUMO, band gap and quantum chemical parameters were determined. Predicted band gap ranges from 1.6 to 3.8 eV. Some compounds have a good absorption property (above 500 nm) which is suitable for our purpose. The study assists in the identification of materials with advantageous electrical, optical and photovoltaic characteristics that can serve as donor molecules in heterojunction organic solar cells. The theoretical studies also aided in the clarification of the structure–property relationships that significantly affect efficiency of the device.

Photovoltaic properties of novel reactive azobenzoquinolines: experimental and theoretical investigations

Abstract In this work, synthesis, characterization, DFT, TD-DFT study of some novel reactive azobenzoquinoline dye structures to elucidate their photovoltaic properties. The azobenzoquinoline compounds were experimentally synthesized through a series of reaction routes starting from acenaphthene to obtained aminododecylnaphthalimide and finally coupled with diazonium salts to get the desired azobenzoquinoline. Azo dye synthesized differ in the number of alkyl chains designated as (AR1, AR2, AR3, and AR4) which were experimentally analyzed using FT-IR and NMR spectroscopic methods. The synthesized structures were modelled for computational investigation using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) combined with B3LYP and 6-31+G(d) basis set level of theory. The results showed that the HOMO-LUMO energy gap was steady at approximately 2.8 eV as the alkyl chain increases, which has been proven to be within the material energy gap limit for application in photovoltaic. The highest intramolecular natural bond orbital (NBO) for the studied compounds is 27.60, 55.06, 55.06, and 55.04 kcal/mol for AR1, AR2, AR3, and AR4 respectively and the donor and acceptor interacting orbitals for the highest stabilization energy (E (2)) are LP(1)N 18 and π*C 16−O 19 respectively. The photovoltaic properties in terms of light-harvesting efficiency (LHE), Short circuit current density (J SC), Gibbs free energy of injection (ΔG inj), open-circuit voltage (V OC) and Gibbs free energy of regeneration (ΔG reg) were evaluated to be within the required limit for DSSC design. Overall, the obtained theoretical photovoltaic results were compared with other experimental and computational findings, thus, are in excellent agreement for organic solar cell design.

Phosphorescent Carbene-Gold-Arylacetylide Materials as Emitters for Near UV-OLEDs.

A series of carbene-gold-acetylide complexes [(BiCAAC)AuCC]n C6 H5- n (n = 1, Au1; n = 2, Au2; n = 3, Au3; BiCAAC = bicyclic(alkyl)(amino)carbene) have been synthesized in high yields. Compounds Au1-Au3 exhibit deep-blue to blue-green phosphorescence with good quantum yields up to 43% in all media. An increase of the (BiCAAC)Au moieties in gold complexes Au1-Au3 increases the extinction coefficients in the UV-vis spectra and stronger oscillator strength coefficients supported by theoretical calculations. The luminescence radiative rates decrease with an increase of the (BiCAAC)Au moieties. The time-dependent density functional theory study supports a charge-transfer nature of the phosphorescence due to the large (0.5-0.6eV) energy gap between singlet excited (S1 ) and triplet excited (T1 ) states. Transient luminescence study reveals the presence of both nonstructured UV prompt-fluorescence and vibronically resolved long-lived phosphorescence 428nm. Organic light-emitting diodes (OLED) are fabricated by physical vapor deposition with 2,8-bis(diphenylphosphoryl)dibenzo[b,d]furan (PPF) as a host material with complex Au1. The near-UV electroluminescence is observed at 405nm with device efficiency of 1% while demonstrating OLED device lifetime LT50 up to 20min at practical brightness of 10 nits, indicating a highly promising class of materials to develop stable UV-OLEDs.

Robust Optical Detection of Ga3+ by a Rhodamine- and Coumarin-Based Proficient Probe: Theoretical Investigations and Biological Applications.

The present investigation highlights a rhodamine-B- and coumarin-based efficient probe that selectively detects Ga3+ over other metal ions. The active pocket of the ligand for trapping the metal ions and the binding stoichiometry of its Ga3+ complex were discovered by single-crystal X-ray diffraction (SC-XRD) analysis. This binding stoichiometry was further confirmed in the solution state by mass spectrometry and Job's plot. The detection limit was found to be at the nanomolar level. Pyrophosphate being a well-known quencher could easily quench the fluorescence intensity of the RC in the presence of Ga3+ and reversibly recognize Ga3+ in the solution. The spiro ring opening of the ligand after Ga3+ insertion is proposed to be the principal mechanism for the turn-on fluorescence response. This ring opening was confirmed by SC-XRD data and nuclear magnetic resonance (NMR) titration experiments. Both ground- and excited-state calculations of the ligand and complex have been carried out to obtain information about their energy levels and to obtain the theoretical electronic spectra. Furthermore, the live-cell imaging of the probe only and the probe after the addition of Ga3+ have been carried out in HaCaT cells and satisfactory responses were observed. Interestingly, with the help of this probe, Ga3+ can be tracked inside the intracellular organelle such as lysosomes along with other regions of the cell. The article highlights a rhodamine-coumarin-based probe for the detection of Ga3+ over other metal ions with a nanomolar level detection limit. Structural characterization of the ligand and its Ga3+ complex was investigated by SC-XRD. Density functional theory (DFT) and time-dependent DFT (TD-DFT) studies were carried out to explore the excited-state energies and electronic spectra. The application of the probe for the detection of Ga3+ in live cells has been explored, and positive responses were observed.

Influence of bulky peripheral substituents on subphthalocyanine derivatives: Implications for photocatalytic and photoelectrochemical hydrogen production

A series of novel subphthalocyanine (SubPc) derivatives with bulky electron-donating substituents were synthesized for visible light-induced photocatalytic and photoelectrochemical hydrogen production. SubPc derivatives were decorated with bulky thiophenoxy (coded SubPc 1–2) and phenoxy (coded SubPc 3–4) substituents to compare the influence of the nature of the peripheral bulky substituents on the photophysical and photocatalytic activity of SubPc. The highest photocatalytic performance was obtained from SubPc 4, having diphenyl phenoxy substituents with an H2 production rate of 7.233 mmol g-1h−1. The photocatalytic hydrogen evolution activities of all SubPc sensitized TiO2 photocatalysts enhanced approximately four times in the presence of Pt co-catalyst. The photocatalysts showed remarkable long-term stability and reproducibility of H2 evolution over 24-hour irradiation. SubPc 4-based photocatalytic system reached a considerable catalytic activity with the H2 production of 16.022 mmol g−1 and a turnover number (TON) value of 34,089 for 24 h irradiation. Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) studies were carried out to better understand the photocatalytic abilities of SubPc derivatives and develop a symbiotic connection with experimental investigations. The results highlight the importance of peripheral substituents in modifying electron density, dipole moment, and HOMO-LUMO energy levels and improving SubPc derivative light-harvesting performance. The presence of 2,6-diisopropyl on SubPc derivatives (SubPc 2 and 4) caused a significant change in the properties, resulting in favourable electron transport characteristics and, therefore, improving photocatalytic performance. Furthermore, the incorporation of TiO2, as shown in SubPc 1@TiO2 and SubPc 2@TiO2, resulted in a modest reduction in chemical hardness, implying increased charge transfer inside the molecule and, as a consequence, enhancing its efficacy as a sensitizer. These theoretical discoveries provide a solid foundation for the customized design and optimization of SubPc derivatives for effective photocatalytic applications.

Multi-spectroscopic, TD-DFT and bio-imaging studies of new Schiff base optical probe for the detection of CN− and Al(III) ions

The selective and sensitive dual channel assay of CN− and fluorescence assay of Al(III) are reported using a simple organic probe (VDP1) in aqueous and non-aqueous media. The binding behaviours of these ionic analytes with VDP1 were studied using UV–Vis, fluorescence, (1H, 13C & 27Al) NMR and mass spectral techniques. VDP1 showed a highly selective change of colour and fluorescence enhancement with CN− ion immediately without interference from other anions. The experimental results revealed that the mechanism of CN− detection involves deprotonation of the phenolic -OH group followed by nucleophilic addition at the imine C-atom. The addition of Al(III) was found to enhance the fluorescence of VDP1 significantly through chelation-enhanced fluorescence effect (CHEF) by forming a 1:1 octahedral complex [Al(VDP1)(NO3)3(H2O)]. The Density Functional Theory (DFT) and Time-dependent Density Functional Theory (TD-DFT) based theoretical calculations confirmed that the weak fluorescence of VDP1 is due to the charge transfer (CT) character of the transition in which non-radiative decay dominates. The theoretically computed optical properties matched well with that of experimental observations. The limits of detection (LOD) of these ionic analytes were also calculated and found to be much lower than the corresponding recommended limit set by the World Health Organization (WHO). MTT assay indicated that VDP1 is less toxic to HeLa cells and could detect intracellular CN− and Al(III) ions by bioimaging.

Multicomponent one-pot synthesis of 2-amino-6-(2-oxo-2H-chromen-3-yl)-4-(1,3-diphenyl-1H-pyrazol-4-yl)pyridine-3-carbonitriles and their photophysical, solvatochromic, DFT, TD-DFT studies, latent fingerprints, hydrogels and data encryption applications

A novel series of 2-amino-6-(2-oxo-2H-chromen-3-yl)-4-(1,3-diphenyl-1H-pyrazol-4-yl)pyridine-3-carbonitriles (4i-w) were synthesised employing a simple and efficient multicomponent one-pot synthesis. Since the compounds exhibit visible fluorescence and strong solubility in organic solvents, their optical and solvatochromic properties have been thoroughly examined via UV–Vis absorption and fluorescence spectroscopy, including density functional theory (DFT) and time-dependent density functional theory (TD-DFT). An in-depth investigation of the anti-counterfeiting (AC) application of latent fingerprints (LFPs) found that the ridges had many indestructible and unique pores. To attain superior safety and efficiency, highly effective anticounterfeiting techniques have been assembled. The ability to detect sweat pores opens up novel forensic investigation possibilities. FTs (fingerprint tags) recognised LFPs that were incredibly effective, sensitive, selective, and low in toxicity. The outcomes can be used for secure encoding, personal identification, photoluminescent hydrogel, and studying LFPs on various surfaces under UV 365 nm light.