Tibiofemoral Cartilage Contact Research Articles

An anatomically shaped medial meniscus prosthesis is able to partially restore the contact mechanics of the meniscectomized knee joint

PurposeThe aim of this study was to determine whether a flexible medial meniscus prosthesis is more capable of sharing loads with the direct tibiofemoral cartilage contact than the stiffer first-generation prosthesis. Additionally, the effect of the prosthesis on the tibial pressure distribution after total meniscectomy was investigated.MethodsIn an artificial knee joint, the relative amounts of load transferred through both meniscus prostheses and the direct tibiofemoral contact were assessed with pressure-sensitive sensors.Additionally, six cadaveric knee joints were loaded in a physiological environment. Tibial contact pressures were measured with an intact native meniscus, after total meniscectomy and after implantation of the second-generation meniscus prosthesis.ResultsWhereas the first generation of the meniscus prosthesis transferred virtually all the load from femur to tibia, the second-generation prosthesis allowed for load sharing with the direct tibiofemoral contact.No differences in load sharing were found between the native meniscus and the second-generation meniscus prosthesis. The prosthesis decreased peak and mean pressures on the medial tibial cartilage compared to meniscectomy. No significant differences in pressure were found between the native meniscus and the meniscus prosthesis.ConclusionsThe second-generation meniscus prosthesis presented in this study can share loads with the direct tibiofemoral contact, a characteristic that the first-generation prosthesis did not have.The flexible meniscus prosthesis significantly reduces the contact pressures on the medial tibial plateau after total meniscectomy. Although the biomechanical performance of the native meniscus could not be reproduced completely, the meniscus prosthesis may have the potential to relieve post-meniscectomy pain symptoms.

Cartilage contact characteristics of the knee during gait in individuals with obesity.

Obesity increases the risk of knee osteoarthritis (OA). Knee joint contact characteristics have been thought to provide insights into the pathogenesis of knee OA; however, the cartilage contact characteristics in individuals with obesity have not been fully described. We conducted cartilage-to-cartilage contact analyses through high-precision fluoroscopy imaging with subject-specific magnetic resonance cartilage models. Twenty-five individuals with obesity were recruited for this study, and previously published data consisted of eight nonobese individuals who were used as the comparator group. In both groups, knees were imaged by a dual fluoroscopic imaging system during treadmill walking, and the tibiofemoral cartilage contact locations were analyzed and described on the tibial plateau in the medial-lateral (ML) and anterior-posterior (AP) directions and on femoral condyle surfaces using contact angles in the sagittal plane and deviation angles in a plane perpendicular to the sagittal plane. On the medial tibial plateau, the ML contact locations in the individuals with obesity were located more medially than in the nonobese group throughout the stance phase. The medial plateau AP contact locations in individuals with obesity showed a different pattern compared with the nonobese group. The ML contact excursions on the medial plateau in the individuals with obesity were larger than in the nonobese group. These findings suggest that obesity affects the contact location mainly in the medial compartment, which explains, in part, the high prevalence of medial knee OA in the obese population.

Articulation of the femoral condyle during knee flexion

Femoral condyle motion of the knee is generally reported using a morphological trans-epicondyle axis (TEA) or geometric center axis (GCA) in the investigation of the knee kinematics. Axial rotation of the femur is recognized as a characteristic motion of the knee during flexion, but is controversial in the literature. This study investigated the biomechanical factors that could be associated to the axial rotations of the femur using both physiological and morphological measurement methods. Twenty healthy knees were investigated during a weightbearing flexion from 0° to 120° at a 15° increment using an imaging technique. A 3D model was constructed for each knee using MR images. Tibiofemoral cartilage contact points were determined at each flexion position to represent physiological knee motion. The contact distance on each condyle was measured between consecutive contact points. The TEA and GCA were used to measure morphological anteroposterior translations of the femoral condyles. The differences between the medial and lateral condyle motions were used to calculate the physiological and morphological axial rotations of the femur. Both the physiological and morphological methods measured external rotations of the femur at low flexion range (0°-45°) and minimal rotations at higher flexion angles. However, the morphological method measured larger posterior translations of the lateral femoral condyle than the medial condyle (p < 0.05), implying a medial pivoting rotation; in contrast, the physiological method measured larger contact distances on the medial condyle than on the lateral condyle (p < 0.05), implying a lateral pivoting rotation. These data could provide useful references for future investigation of kinematics of the knee before and after surgical repair, such as using total knee arthroplasty.

Augmentation of Anterolateral Structures of the Knee Causes Undesirable Tibiofemoral Cartilage Contact in Double-Bundle Anterior Cruciate Ligament Reconstruction—A Randomized In-Vivo Biomechanics Study

To analyze the invivo tibiofemoral cartilage contact patterns in knees undergoing double-bundle anterior cruciate ligament reconstruction(DB-ACLR) with or without anterolateral structure augmentation (ALSA). Twenty patients with an ACL-ruptured knee and a healthy contralateral side were included. Nine patients received an isolated DB-ACLR (DB-ACLR group), and 11 patients had a DB-ACLR with ALSA (DB+ALSA group). At 1-year follow-up, a combined computed tomography, magnetic resonance imaging, and dual fluoroscopy imaging system analysis was used to capture a single-legged lunge of both the operated and healthy contralateral side. Tibiofemoral contact points (CPs) of the medial and lateral compartments were compared. CP locations were expressed as anteroposterior (AP, +/-) and medial-lateral (ML, -/+) values according to the tibia. In the DB-ACLR knees, no significant differences were found in CPs when compared with the healthy contralateral knees (P ≥ .31). However, in the DB+ALSA knees, the CPs in the lateral compartment had a significantly more anterior (mean AP: operative, -2.8 mm, 95% confidence interval [CI] -5.0 to-0.7 vs healthy, -5.0 mm, 95% CI -6.7 to -3.2; P= .006) and lateral (mean ML: operative, 23.2 mm, 95% CI 21.9-24.5 vs healthy, 21.8 mm, 95% CI 20.2-23.3; P= .013) location. The CPs in the medial compartment were located significantly more posterior (mean AP: operative, -3.4, 95% CI -5.0 to -1.9 vs healthy, -1.3, 95% CI -2.6 to -0.1; P= .006) and lateral (mean ML: operative, -21.3, 95% CI -22.6 to -20.0 vs healthy, -22.6, 95% CI -24.2 to -21.0; P= .021). DB-ACLR restored the tibiofemoral cartilage contact mechanics to near-normal values at 1-year follow-up. Adding the ALSA to the DB-ACLR resulted in significantly altered tibiofemoral cartilage contact locations in both the medial and lateral compartments. In DB-ACLR knees, the addition of an ALSA may be unfavorable as it caused significantly changed arthrokinematics.

Tibiofemoral Cartilage Contact Pressures in Athletes During Landing: A Dynamic Finite Element Study.

Cartilage defects are common in the knee joint of active athletes and remain a problem as a strong risk factor for osteoarthritis. We hypothesized that landing during sport activities, implication for subfailure ACL loading, would generate greater contact pressures (CP) at the lateral knee compartment. The purpose of this study is to investigate tibiofemoral cartilage CP of athletes during landing. Tibiofemoral cartilage contact pressures (TCCP) under clinically relevant anterior cruciate ligament subfailure external loadings were predicted using four dynamic explicit finite element (FE) models (2 males and 2 females) of the knee. Bipedal landing from a jump for five cases of varying magnitudes of external loadings (knee abduction moment, internal tibial torque, and anterior tibial shear) followed by an impact load were simulated. Lateral TCCP from meniscus (area under meniscus) and from femur (area under femur) increased by up to 94% and %30 respectively when external loads were incorporated with impact load in all the models compared to impact-only case. In addition, FE model predicted higher CP in lateral compartment by up to 37% (11.87 MPa versus 8.67 MPa) and 52% (20.19 MPa versus 13.29 MPa) for 90% and 50% percentile models, respectively. For the same percentile populations, CPs were higher by up to 25% and 82% in smaller size models than larger size models. We showed that subfailure ACL loadings obtained from previously conducted in vivo study led to high pressures on the tibiofemoral cartilage. This knowledge is helpful in enhancing neuromuscular training for athletes to prevent cartilage damage.

Physiological articular contact kinematics and morphological femoral condyle translations of the tibiofemoral joint

The changes of tibiofemoral articular cartilage contact locations during knee activities represent a physiological functional characteristic of the knee. However, most studies reported relative motions of the tibia and femur using morphological flexion axes. Few data have been reported on comparisons of morphological femoral condyle motions and physiological tibiofemoral cartilage contact location changes. This study compared the morphological and physiological kinematic measures of 20 knees during an in vivo weightbearing single leg lunge from full extension to 120° of flexion using a combined MRI and dual fluoroscopic imaging system (DFIS) technique. The morphological femoral condyle motion was measured using three flexion axes: trans-epicondylar axis (TEA), geometric center axis (GCA) and iso-height axis (IHA). At low flexion angles, the medial femoral condyle moved anteriorly, opposite to that of the contact points, and was accompanied with a sharp increase in external femoral condyle rotation. At 120° of flexion, the morphological measures of the lateral femoral condyle were more posteriorly positioned than those of the contact locations. The data showed that the morphological measures of femoral condyle translations and axial rotations varied with different flexion axes and did not represent the physiological articular contact kinematics. Biomechanical evaluations of the knee joint motion should include both morphological and physiological kinematics data to accurately demonstrate the functionality of the knee.

Anterior Cruciate Ligament Graft Tunnel Placement and Graft Angle Are Primary Determinants of Internal Knee Mechanics After Reconstructive Surgery

Background: Graft placement is a modifiable and often discussed surgical factor in anterior cruciate ligament (ACL) reconstruction (ACLR). However, the sensitivity of functional knee mechanics to variability in graft placement is not well understood. Purpose: To (1) investigate the relationship of ACL graft tunnel location and graft angle with tibiofemoral kinematics in patients with ACLR, (2) compare experimentally measured relationships with those observed with a computational model to assess the predictive capabilities of the model, and (3) use the computational model to determine the effect of varying ACL graft tunnel placement on tibiofemoral joint mechanics during walking. Study Design: Controlled laboratory study. Methods: Eighteen participants who had undergone ACLR were tested. Bilateral ACL footprint location and graft angle were assessed using magnetic resonance imaging (MRI). Bilateral knee laxity was assessed at the completion of rehabilitation. Dynamic MRI was used to measure tibiofemoral kinematics and cartilage contact during active knee flexion-extension. Additionally, a total of 500 virtual ACLR models were created from a nominal computational knee model by varying ACL footprint locations, graft stiffness, and initial tension. Laxity tests, active knee extension, and walking were simulated with each virtual ACLR model. Linear regressions were performed between internal knee mechanics and ACL graft tunnel locations and angles for the patients with ACLR and the virtual ACLR models. Results: Static and dynamic MRI revealed that a more vertical graft in the sagittal plane was significantly related (P < .05) to a greater laxity compliance index (R2 = 0.40) and greater anterior tibial translation and internal tibial rotation during active knee extension (R2 = 0.22 and 0.23, respectively). Similarly, knee extension simulations with the virtual ACLR models revealed that a more vertical graft led to greater laxity compliance index, anterior translation, and internal rotation (R2 = 0.56, 0.26, and 0.13). These effects extended to simulations of walking, with a more vertical ACL graft inducing greater anterior tibial translation, ACL loading, and posterior migration of contact on the tibial plateaus. Conclusion: This study provides clinical evidence from patients who underwent ACLR and from complementary modeling that functional postoperative knee mechanics are sensitive to graft tunnel locations and graft angle. Of the factors studied, the sagittal angle of the ACL was particularly influential on knee mechanics. Clinical Relevance: Early-onset osteoarthritis from altered cartilage loading after ACLR is common. This study shows that postoperative cartilage loading is sensitive to graft angle. Therefore, variability in graft tunnel placement resulting in small deviations from the anatomic ACL angle might contribute to the elevated risk of osteoarthritis after ACLR.

Tibiofemoral Cartilage Contact Differences Between Level Walking and Downhill Running.

Background:Some studies have suggested that altered tibiofemoral cartilage contact behavior (arthrokinematics) may contribute to long-term cartilage degeneration, potentially leading to tibiofemoral osteoarthritis. However, few studies have assessed normal tibiofemoral arthrokinematics during dynamic activities.Purpose:To characterize tibiofemoral arthrokinematics during the impact phase of level walking and downhill running.Study Design:Descriptive laboratory study.Methods:Arthrokinematic data were collected on uninjured knees of 44 participants (mean age, 20.7 ± 6.6 years). Using a dynamic stereoradiographic imaging system with superimposed 3-dimensional bone models from computed tomography and magnetic resonance imaging of participant-specific tibiofemoral joints, arthrokinematics were assessed during the first 15% of the gait cycle during level walking and the first 10% of the gait cycle during downhill running.Results:During level walking and downhill running, the medial compartment had a greater cartilage contact area versus the lateral compartment. Both compartments had a significantly less cartilage contact area during running versus walking (medial compartment gait cycle affected: 8%-10%; lateral compartment gait cycle affected: 5%-10%). Further, medial and lateral compartment tibiofemoral contact paths were significantly more posterior and longer during downhill running.Conclusion:There was a decreased tibiofemoral cartilage contact area during downhill running compared with level walking, suggesting that underlying bone morphology may play a key role in determining the size of cartilage contact regions.Clinical Relevance:This study provides the first data characterizing tibiofemoral cartilage contact patterns during level walking and downhill running. These results provide evidence in support of performing biomechanical assessments during both level walking and downhill running to obtain a comprehensive picture of tibiofemoral cartilage behavior after clinical interventions.

Longitudinal analysis of tibiofemoral cartilage contact area and position in ACL reconstructed patients

Patients who have suffered ACL injury are more likely to develop early onset post-traumatic osteoarthritis despite reconstruction. The purpose of our study was to evaluate the longitudinal changes in the tibiofemoral cartilage contact area size and location after ACL injury and reconstruction. Thirty-one patients with isolated unilateral ACL injury were followed with T2 weighted Fast Spin Echo, T1ρ and T2 MRI at baseline prior to reconstruction, and 6 months, 1 year, and 2 years after surgery. Areas were delineated in FSE images with an in-house Matlab program using a spline-based semi-automated segmentation algorithm. Tibiofemoral contact area and centroid position along the anterior-posterior axis were calculated along with T1ρ and T2 relaxation times on both the injured and non-injured knees. At baseline, the injured knees had significantly smaller and more posteriorly positioned contact areas on the medial tibial surface compared to corresponding healthy knees. These differences persisted 6 months after reconstruction. Moreover, subjects with more anterior medial centroid positions at 6 months had elevated T1ρ and T2 measures in the posterior medial tibial plateau at 1 year. Changes in contact area and centroid position after ACL injury and reconstruction may characterize some of the mechanical factors contributing to post-traumatic osteoarthritis. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2718-2727, 2018.

American Society of Biomechanics Clinical Biomechanics Award 2017: Non-anatomic graft geometry is linked with asymmetric tibiofemoral kinematics and cartilage contact following anterior cruciate ligament reconstruction

BackgroundAbnormal knee mechanics may contribute to early cartilage degeneration following anterior cruciate ligament reconstruction. Anterior cruciate ligament graft geometry has previously been linked to abnormal tibiofemoral kinematics, suggesting this parameter may be important in restoring normative cartilage loading. However, the relationship between graft geometry and cartilage contact is unknown. MethodsStatic MR images were collected and segmented for eighteen subjects to obtain bone, cartilage, and anterior cruciate ligament geometries for their reconstructed and contralateral knees. The footprint locations and orientation of the anterior cruciate ligament were calculated. Volumetric, dynamic MR imaging was also performed to measure tibiofemoral kinematics, cartilage contact location, and contact sliding velocity while subjects performed loaded knee flexion-extension. Multiple linear regression was used to determine the relationship between non-anatomic graft geometry and asymmetric knee mechanics. FindingsNon-anatomic graft geometry was related to asymmetric knee mechanics, with the sagittal plane graft angle being the best predictor of asymmetry. A more vertical sagittal graft angle was associated with greater anterior tibial translation (β = 0.11mmdeg, P = 0.049, R2 = 0.22), internal tibial rotation (β = 0.27degdeg, P = 0.042, R2 = 0.23), and adduction angle (β = 0.15degdeg, P = 0.013, R2 = 0.44) at peak knee flexion. A non-anatomic sagittal graft orientation was also linked to asymmetries in tibial contact location and sliding velocity on the medial (β = −4.2mmsdeg, P = 0.002, R2 = 0.58) and lateral tibial plateaus (β = 5.7mmsdeg, P = 0.006, R2 = 0.54). InterpretationThis study provides evidence that non-anatomic graft geometry is linked to asymmetric knee mechanics, suggesting that restoring native anterior cruciate ligament geometry may be important to mitigate the risk of early cartilage degeneration in these patients.

The coupled effects of crouch gait and patella alta on tibiofemoral and patellofemoral cartilage loading in children

BackgroundElevated tibiofemoral and patellofemoral loading in children who exhibit crouch gait may contribute to skeletal deformities, pain, and cessation of walking ability. Surgical procedures used to treat crouch frequently correct knee extensor insufficiency by advancing the patella. However, there is little quantitative understanding of how the magnitudes of crouch and patellofemoral correction affect cartilage loading in gait. MethodsWe used a computational musculoskeletal model to simulate the gait of twenty typically developing children and fifteen cerebral palsy patients who exhibited mild, moderate, and severe crouch. For each walking posture, we assessed the influence of patella alta and baja on tibiofemoral and patellofemoral cartilage contact. ResultsTibiofemoral and patellofemoral contact pressures during the stance phase of normal gait averaged 2.2 and 1.0 MPa. Crouch gait increased pressure in both the tibofemoral (2.6–4.3 MPa) and patellofemoral (1.8–3.3 MPa) joints, while also shifting tibiofemoral contact to the posterior tibial plateau. For extended-knee postures, normal patellar positions (Insall-Salvatti ratio 0.8–1.2) concentrated contact on the middle third of the patellar cartilage. However, in flexed knee postures, both normal and baja patellar positions shifted pressure toward the superior edge of the patella. Moving the patella into alta restored pressure to the middle region of the patellar cartilage as crouch increased. ConclusionsThis work illustrates the potential to dramatically reduce tibiofemoral and patellofemoral cartilage loading by surgically correcting crouch gait, and highlights the interaction between patella position and knee posture in modulating the location of patellar contact during functional activities.

In vivo tibiofemoral skeletal kinematics and cartilage contact arthrokinematics during decline walking after isolated meniscectomy

We investigated the effects of isolated meniscectomy on tibiofemoral skeletal kinematics and cartilage contact arthrokinematics in vivo. We recruited nine patients who had undergone isolated medial or lateral meniscectomy, and used a dynamic stereo-radiography (DSX) system to image the patients’ knee motion during decline walking. A volumetric model-based tracking process determined 3D tibiofemoral kinematics from the recorded DSX images. Cartilage contact arthrokinematics was derived from the intersection between tibial and femoral cartilage models co-registered to the bones. The kinematics and arthrokinematics were analyzed for early stance and loading response phase (30% of a gait cycle), comparing the affected and intact knees. Results showed that four patients with medial meniscectomy had significantly greater contact centroid excursions in the meniscectomized medial compartments while five patients with lateral meniscectomy had significantly greater cartilage contact area and lateral shift of contact centroid path in the meniscectomized lateral compartments, comparing to those of the same compartments in the contralateral intact knees. No consistent difference however was identified in the skeletal kinematics. The current study demonstrated that cartilage-based intra-articular arthrokinematics is more sensitive and insightful than the skeletal kinematics in assessing the meniscectomy effects.

Analysis of in-vivo articular cartilage contact surface of the knee during a step-up motion

BackgroundNumerous studies have reported on the tibiofemoral articular cartilage contact kinematics, however, no data has been reported on the articular cartilage geometry at the contact area. This study investigated the in-vivo tibiofemoral articular cartilage contact biomechanics during a dynamic step-up motion. MethodsTen healthy subjects were imaged using a validated magnetic resonance and dual fluoroscopic imaging technique during a step-up motion. Three-dimensional bone and cartilage models were constructed from the magnetic resonance images. The cartilage contact along the motion path was analyzed, including cartilage contact location and the cartilage surface geometry at the contact area. FindingsThe cartilage contact excursions were similar in anteroposterior and mediolateral directions in the medial and lateral compartments of the tibia plateau (P>0.05). Both medial and lateral compartments were under convex (femur) to convex (tibia) contact in the sagittal plane, and under convex (femur) to concave (tibia) contact in the coronal plane. The medial tibial articular contact radius was larger than the lateral side in the sagittal plane along the motion path (P<0.001). InterpretationsThese data revealed that both the medial and lateral compartments of the knee experienced convex (femur) to convex (tibia) contact in sagittal plane (or anteroposterior direction) during the dynamic step-up motion. These data could provide new insight into the in-vivo cartilage contact biomechanics research, and may provide guidelines for development of anatomical total knee arthroplasties that are aimed to reproduce normal knee joint kinematics.

Postoperative time dependent tibiofemoral articular cartilage contact kinematics during step-up after ACL reconstruction

This study was to investigate the in vivo tibiofemoral cartilage contact locations before and after anterior cruciate ligament (ACL) reconstruction at 6 and 36 months.Ten patients with unilateral ACL injury were included. A step-up motion was analyzed using a combined magnetic resonance modeling and dual fluoroscopic imaging techniques. The preoperative (i.e. ACL deficient and healthy contralateral) and postoperative cartilage contact locations at 6 and 36 months were analyzed.Similar patterns of the cartilage contact locations during the step-up motion were found for the preoperative and postoperative knee states as compared to the preoperative healthy contralateral side. At the end of step-up motion, the medial contact locations at postoperative 36 months were more anterior when compared to the preoperative healthy contralateral (p=0.02) and 6 months postoperative knee states (p=0.01). The changes of the cartilage contact locations at 36 months after ACL reconstruction compared to the healthy contralateral side were strongly correlated with the changes at 6 months postoperatively.This study showed that the tibiofemoral cartilage contact locations of the knee changes with time after ACL reconstruction, implying an ongoing recovery process within the 36 months after the surgery. There could be an association between the short-term (6 months) and longer-term (36 months) contact kinematics after ACL reconstruction. Future studies need to investigate the intrinsic relationship between knee kinematics at different times after ACL reconstruction.

Influence of Ligament Properties on Tibiofemoral Mechanics in Walking.

Computational knee models provide a powerful platform to investigate the effects of injury and surgery on functional knee behavior. The objective of this study was to use a multibody knee model to investigate the influence of ligament properties on tibiofemoral kinematics and cartilage contact pressures in the stance phase of walking. The knee model included 14 ligament bundles and articular cartilage contact acting across the tibiofemoral and patellofemoral joints. The knee was incorporated into a lower extremity musculoskeletal model and was used to simulate knee mechanics during the stance phase of normal walking. A Monte Carlo approach was employed to assess the influence of ligament stiffness and reference strain on knee mechanics. The anterior cruciate ligament (ACL), medial collateral ligament (MCL), and posterior capsule properties exhibited significant influence on anterior tibial translation at heel strike, with the ACL acting as the primary restraint to anterior translation in mid-stance. The MCL and lateral collateral ligament (LCL) exhibited the greatest influence on tibial rotation from heel strike through mid-stance. Simulated tibial plateau contact location was dependent on the ACL, MCL, and LCL properties, while pressure magnitudes were most dependent on the ACL. A decrease in ACL stiffness or reference strain significantly increased the average contact pressure in mid-stance, with the pressure migrating posteriorly on the medial tibial plateau. These ligament-dependent shifts in tibiofemoral cartilage contact during walking are potentially relevant to consider when investigating the causes of early-onset osteoarthritis following knee ligament injury and surgical treatment.

Validation of a method for combining biplanar radiography and magnetic resonance imaging to estimate knee cartilage contact

Combining accurate bone kinematics data from biplane radiography with cartilage models from magnetic resonance imaging, it is possible to estimate tibiofemoral cartilage contact area and centroid location. Proper validation of such estimates, however, has not been performed under loading conditions approximating functional tasks, such as gait, squatting, and stair descent. The goal of this study was to perform an in vitro validation to resolve the accuracy of cartilage contact estimations in comparison to a laser scanning gold standard. Results demonstrated acceptable reliability and accuracy for both contact area and centroid location estimates. Root mean square errors in contact area averaged 8.4% and 4.4% of the medial and lateral compartmental areas, respectively. Modified Sorensen-Dice agreement scores of contact regions averaged 0.81 ± 0.07 for medial and 0.83 ± 0.07 for lateral compartments. These validated methods have applications for in vivo assessment of a variety of patient populations and physical activities, and may lead to greater understanding of the relationships between knee cartilage function, effects of joint injury and treatment, and the development of osteoarthritis.

In vivo cartilage strain increases following medial meniscal tear and correlates with synovial fluid matrix metalloproteinase activity

Meniscal tears are common injuries, and while partial meniscectomy is a frequent treatment option, general meniscus loss is a risk factor for the development of osteoarthritis. The goal of this study was to measure the in vivo tibiofemoral cartilage contact patterns in patients with meniscus tears in relation to biomarkers of cartilage catabolism in the synovial fluid of these joints. A combination of magnetic resonance imaging and biplanar fluoroscopy was used to determine the in vivo motion and cartilage contact mechanics of the knee. Subjects with isolated medial meniscus tears were analyzed while performing a quasi-static lunge, and the contralateral uninjured knee was used as a control. Synovial fluid was collected from the injured knee and matrix metalloproteinase (MMP) activity, sulfated glycosaminoglycan, cartilage oligomeric matrix protein, prostaglandin E2, and the collagen type II cleavage biomarker C2C were measured. Contact strain in the medial compartment increased significantly in the injured knees compared to contralateral control knees. In the lateral compartment, the contact strain in the injured knee was significantly increased only at the maximum flexion angle (105°). The average cartilage strain at maximum flexion positively correlated with total MMP activity in the synovial fluid. These findings show that meniscal injury leads to loss of normal joint function and increased strain of the articular cartilage, which correlated to elevated total MMP activity in the synovial fluid. The increased strain and total MMP activity may reflect, or potentially contribute to, the early development of osteoarthritis that is observed following meniscal injury.

Tibiofemoral centroid velocity correlates more consistently with cartilage damage than does contact path length in two ovine models of stifle injury

Anterior cruciate ligament (ACL) rupture and/or meniscal injury are known risk factors for post-traumatic osteoarthritis. We tested the hypothesis that increasingly abnormal tibiofemoral centroid path lengths and velocities would correlate with the severity of cartilage damage in injured sheep. Six sheep underwent combined ACL/medial collateral ligament transection (ACL/MCLx), five complete lateral meniscectomy (Mx), and four sham arthrotomy (Sham). Weighted centroids were used to estimate in vivo tibiofemoral cartilage contact path length during stance and the velocity of relative motion. Cartilage morphology was graded at dissection. Ligament transection significantly elongated plateau centroid path lengths and velocities, whereas condyle paths and velocities were reduced. Differences between plateau and femoral velocities (relative centroid velocity) were increased up to 10-fold over baseline values in the medial compartment. Reductions in Mx lateral compartment paths were significantly different from ACL/MCLx paths, but not relative to baseline or Sham values. Importantly, only centroid velocities consistently correlated with cartilage damage in either injury model, suggesting that while path length is valuable in detecting changes in the envelope of joint motion, it may average out meaningful peaks in the rate of relative motion that more closely relate to the mechanisms that might be damaging articular cartilage in these models.

In vivo kinematics of the knee during weight bearing high flexion

Achieving high flexion is an objective of contemporary total knee arthoplasty; however little is known on the knee biomechanics at high flexion under weight-bearing conditions. This study investigates the 6DOF kinematics and tibiofemoral cartilage contact biomechanics of the knee during weight-bearing flexion from full extension to maximal flexion. Eight knees from seven healthy subjects with no history of injuries or chronic pain were recruited. The knees were MRI scanned to create 3D models of the tibia and femur, including their articular cartilage surfaces. The subjects were then imaged using a dual fluoroscopic image system while performing a weight-bearing quasi-static single-legged lunge from full extension to maximal flexion. The 6DOF kinematics and the articular cartilage contact locations were measured along the flexion path of the knee. The result indicated that the internal tibial rotation increased sharply at low flexion angles (full extension to 30°), maintained a small variation in the middle range of flexion (30–120°, and then sharply increased again at high flexion angles (120° to maximal flexion). The contact point moved similarly in the medial and lateral compartments before 120° of flexion, but less on the medial compartment at high flexion angles. The results indicated that the knee motion could not be described using one character in the entire range of flexion, especially in high flexion. The knee kinematic data in the entire range of flexion of the knee could be instrumental for designing new knee prostheses to achieve physical high flexion and improving rehabilitation protocols after knee injuries.

Tibiofemoral cartilage contact biomechanics in patients after reconstruction of a ruptured anterior cruciate ligament

We investigated the in vivo cartilage contact biomechanics of the tibiofemoral joint in patients after reconstruction of a ruptured anterior cruciate ligament (ACL). A dual fluoroscopic and MR imaging technique was used to investigate the cartilage contact biomechanics of the tibiofemoral joint during in vivo weight-bearing flexion of the knee in eight patients 6 months following clinically successful reconstruction of an acute isolated ACL rupture. The location of tibiofemoral cartilage contact, size of the contact area, cartilage thickness at the contact area, and magnitude of the cartilage contact deformation of the ACL-reconstructed knees were compared with those previously measured in intact (contralateral) knees and ACL-deficient knees of the same subjects. Contact biomechanics of the tibiofemoral cartilage after ACL reconstruction were similar to those measured in intact knees. However, at lower flexion, the abnormal posterior and lateral shift of cartilage contact location to smaller regions of thinner tibial cartilage that has been described in ACL-deficient knees persisted in ACL-reconstructed knees, resulting in an increase of the magnitude of cartilage contact deformation at those flexion angles. Reconstruction of the ACL restored some of the in vivo cartilage contact biomechanics of the tibiofemoral joint to normal. Clinically, recovering anterior knee stability might be insufficient to prevent post-operative cartilage degeneration due to lack of restoration of in vivo cartilage contact biomechanics.