Tibial Rotation Research Articles

6DOF knee kinematic alterations due to increased load levels.

Whether load carriage leads to six-degrees-of-freedom (6DOF) knee kinematic alterations remains unclear. Exploring this mechanism may reveal meaningful knee kinematic information that can be used to improve load carriage conditions, the design of protective devices, and the knowledge of the effects of load carriage on knees. We recruited 44 subjects to explore kinematic alterations from an unloaded state to 60% bodyweight (BW) load carriage. A three-dimensional gait analysis system was used to collect the knee kinematic data. One-way repeated analysis of variance (ANOVA) was used to explore the effects of load levels on knee kinematics. The effects of increasing load levels on knee kinematics were smooth with decreased or increased trends. We found that knees significantly exhibited increased lateral tibial translation (up to 1.2 mm), knee flexion angle (up to 1.4°), internal tibial rotation (up to 1.3°), and tibial proximal translation (up to 1.0 mm) when they went from an unloaded state to 60%BW load carriage during the stance phase (p < 0.05). Significant small knee adduction/abduction angle and posterior tibial translation alterations (<1°/mm) were also identified (p < 0.05). Load carriage can cause significant 6DOF knee kinematic alterations. The results showed that knee kinematic environments are challenging during increased load. Our results contain kinematic information that could be helpful for knee-protection-related activities, such as target muscle training to reduce abnormal knee kinematics and knee brace design.

Antero-posterior axis of the tibia is abetter landmark for tibial component rotation in Oxford medial unicompartmental knee arthroplasty.

This retrospective study compares tibial component rotations and radiological and functional outcomes in patients who underwent Oxford medial unicompartmental knee arthroplasty (UKA), using the antero-posterior (AP) tibia axis or anterior superior iliac spine (ASIS) as the landmarks for the direction of the vertical cut. Atotal of 86patients, who underwent Oxford medial UKA were divided into 2 groups, each consisting of 43patients, according to the use of AP axis (groupI) or ASIS (groupII) as landmarks for the rotation of vertical tibial cut and compared for the radiological and functional outcomes. Tibial component rotations (α-angle), involvement of the posterior cruciate ligament (PCL) fossa, and instant bearing position (IBP) were measured on computed tomography (CT) images. Functional outcomes were evaluated using Oxford knee score (OKS) and Knee Society score (KSS). The median α‑angle was significantly smaller in groupI than groupII (2.5°, range -4-5.5° vs. -6°, range -13-0.5°, p < 0.001). The rates of PCL fossa involvements were 14 (32.6%) and 17 (39.5%, p = 0.7). The median flexion angle of the femoral component (7° vs. 10.5°) and posterior tibial slope (6° vs. 8°) were significantly lower in groupI than groupII (p = 0.001). All other radiological parameters, preoperative and final OKS and KSS were statistically similar in both groups. Taking the AP tibial axis as alandmark for vertical tibial cut rotation provides more neutral tibial component rotation in Oxford medial UKA compared to ASIS; however, this difference may not influence the clinical outcomes.

The counteracting effect of the friction moment against the tibial rotational moment driven by the ground reaction force in an early stance phase of cutting maneuver among healthy male athletes

ABSTRACT The ground reaction force (GRF) is known to produce tibial internal rotation loading associated with the stress in the anterior cruciate ligament (ACL). However, it is unclear whether the friction moment (FM; the moment due to horizontal shoe-floor friction, acting around the vertical axis at the GRF acting point) facilitates or restrains the effect of GRF-driven tibial rotation loading during cutting. The 45° cutting motions with forefoot/rearfoot strikes were captured simultaneously with GRF and FM data from 23 healthy males. The FM- and GRF-driven tibial rotation moments were calculated. Time-series correlation between FM- and GRF-driven tibial rotation moments and the orientation relationship among those moment vectors was investigated. The FM-driven tibial rotation moment negatively correlated with the GRF-driven one within the first 10% of stance phase. The peak regression slope value was −0.34 [SD 0.33] for forefoot and −1.64 [SD 1.76] for rearfoot strikes, showing significant difference from zero (SPM one-sample t-test, p<0.05). The FM-driven tibial “external” rotation moment counteracted the GRF-driven tibial “internal” rotation moment within first 10% of the stance phase in most trials, suggesting that the FM-driven tibial rotation moment potentially diminishes the effect of GRF-driven one and may reduce ACL injury risk during cutting.

Posterior tibial slope and meniscal slope correlate with in vivo tibial internal rotation during running and drop jump.

The relationship between tibial bony and meniscus anatomy and knee kinematics during in vivo, high-impact activities remains unclear. This study aimed to determine if the posterior tibial slope (PTS) and meniscal slope (MS) are associated with in vivo anterior-posterior translation and internal tibia rotation during running and double-leg drop jumps in healthy knees. Nineteen collegiate athletes performed fast running at 5.0m/s on an instrumented treadmill and double-leg drop jump from a 60cm platform while biplane radiographs of the knee were acquired at 150Hz. Tibiofemoral kinematics were determined using a validated model-based tracking process. Medial and lateral PTS and MS were measured using magnetic resonance imaging (MRI). In fast running, more internal tibia rotation was associated with greater PTS (ρ = 0.336, P = 0.039) and MS (ρ = 0.405, P = 0.012) in the medial knee compartment. In the double-leg drop jump, more internal tibia rotation was associated with greater PTS (ρ = 0.431, P = 0.007) and MS (ρ = 0.323, P = 0.005) in the medial knee compartment, as well as a greater PTS in the lateral knee compartment (ρ = 0.445, P = 0.005). These findings suggest that the medial and lateral PTS and medial MS are associated with the amount of knee rotation during high-impact activities. These in vivo findings improve our understanding of ACL injury risk by linking bone and meniscus morphology to dynamic kinematics.

Combined Anterior Cruciate Ligament and Lateral Extra-Articular Reconstruction

AbstractThe anterolateral complex (ALC) of the knee has received renewed research interest because of the potential role of this anatomic region in anterior cruciate ligament (ACL) tear biomechanics and surgical treatment outcomes. The primary structures of the ALC include the iliotibial band deep (Kaplan) fibers, the anterolateral ligament (ALL), and the capsulo-osseous layer (COL) of the iliotibial band, although there remains disagreement on the precise anatomic locations and biomechanical relevance of these structures. Sectioning studies in the ACL-deficient knee have revealed a contribution of the ALC in restraining tibial internal rotation and anterior translation. Biomechanical studies have revealed a potential role for lateral extra-articular reconstruction as an augmentation to ACL reconstruction in knees with combined ACL and ALC sectioning. Clinical studies have reported a reduced ACL reconstruction failure rate with both ALL reconstruction and lateral extra-articular tenodesis procedures.

Rotational Stability of the Knee in a Comparative Study of Anterior Cruciate Ligament Reconstruction Using the Double-Bundle and Single-Bundle Techniques.

The purpsose of this study was to evaluate the biomechanical outcomes of patients who underwent ACL reconstruction either with the DB or SB technique. We hypothesized that the DB technique would provide better rotation control of the knee following ACL reconstruction. The study included seventy-five participants (26 DB, 22 SB, and 27 healthy volunteers). Only cases with at least one year of postoperative follow-up were included. The participants performed three different demand tasks: walk task, walk and change direction, and stair descent and change direction, which was tracked using a three-dimensional 4-camera optoelectronic system. The following kinematic data were analyzed: tibial rotation amplitude and maximal internal and external rotation. Knees with ACL reconstruction were compared to contralateral knees with intact ACL and healthy knees. Clinical outcomes were determined using the subjective and objective International Knee Documentation Committee (IKDC) questionnaire and a manual arthrometer (KT 1000). Both surgical groups exhibited similar clinical outcomes (mean subjective IKDC 91 SB vs. 90 DB, P=0.815; KT 1000 difference: 2mm in both groups, P=0.772). The vertical component of the ground force reaction revealed no differences between the surgical and control groups (P>0.05). Tibial rotation amplitude and maximal internal and external rotation were similar between the control, SB, and DB groups in all three different demand tasks (P>0.05). ACL reconstruction using either the SB or DB technique can restore rotational control to the level of a healthy knee. No clinical or functional differences were found between the SB and DB surgical options.

Phenotypes In 3D Knee Kinematics Of Healthy Individuals: Identification And Characterization

Knee mechanical disorders, such as osteoarthritis, affect knee function and kinematics. Establishing phenotypes in healthy individuals is essential to understand "normal" knee movement to be able to adequately assess the impact of injuries and refine treatments. PURPOSE: To identify and characterize phenotypes in healthy 3D knee kinematics. METHODS: Three-dimensional (3D) knee kinematics, namely varus/valgus, flexion/extension, and tibial external/internal rotation movements, were measured via knee kinesiography. A global approach based on a hierarchical discriminant model (BIRCH) was used to separate 3D knee kinematics into homogeneous clusters. Between-phenotype comparisons were made using intracluster correlation coefficient (ICC) and 1D-Statistical parametric mapping (for kinematics), ANOVA and chi-square tests (for participants’ characteristics). RESULTS: Three phenotypes were identified from 150 healthy knees (34 men, 41 women, 33 ± 10 years, Figure 1). First phenotype (blue curve) is characterized by predominant dynamic varus alignment, neutral axial rotation during stance, and more internal tibia rotation during initial swing. This group was composed mostly of men (60.4%). Phenotype 2 (orange), comprised mainly of women (70%), show predominant dynamic valgus alignment, an externally rotated tibia throughout gait cycle. Phenotype 3 (green) shows the most neutral frontal and transverse plane alignment, but greater flexion contracture at heel strike and throughout stance. Phenotype 2 had a higher body mass index than phenotype 1 (p < 0.05). Mean ICC within each phenotype was higher in frontal (0.67) and transverse (0.53) planes compared to sagittal (0.38), suggesting a greater contribution of these planes to identify distinct phenotypes. CONCLUSION: Healthy knee 3D kinematics may be divided in three phenotypes. This finding will help better understand the impact of knee disorders and therefore help define more personalized care plan.

Effect Of Tibia Rotation On Hamstring Activity During Slide Leg Exercise

Effect Of Tibia Rotation On Hamstring Activity During Slide Leg Exercise

Overview of the anterolateral complex of the knee.

In the last few years, much more information on the anterolateral complex of the knee has become available. It has now been demonstrated how it works in conjunction with the anterior cruciate ligament (ACL) controlling anterolateral rotatory laxity. Biomechanical studies have shown that the anterolateral complex (ALC) has a role as a secondary stabilizer to the ACL in opposing anterior tibial translation and internal tibial rotation. It is of utmost importance that surgeons comprehend the intricate anatomy of the entire anterolateral aspect of the knee. Although most studies have only focused on the anterolateral ligament (ALL), the ALC of the knee consists of a functional unit formed by the layers of the iliotibial band combined with the anterolateral joint capsule. Considerable interest has also been given to imaging evaluation using magnetic resonance and several studies have targeted the evaluation of the ALC in the setting of ACL injury. Results are inconsistent with a lack of association between magnetic resonance imaging evidence of injury and clinical findings. Isolated ACL reconstruction may not always reestablish knee rotatory stability in patients with associated ALC injury. In such cases, additional procedures, such as anterolateral reconstruction or lateral tenodesis, may be indicated. There are several techniques available for ALL reconstruction. Graft options include the iliotibial band, gracilis or semitendinosus tendon autograft, or allograft.

Functional and Radiological Outcomes with Intramedullary Interlocking Nailing of Tibial Shaft Fracture

Introduction: Tibia is the most common long bone involved in fracture during Road Traffic Accident (RTA) because of its subcutaneous location. Intramedullary nail fixation remains the treatment of choice for unstable and displaced tibial shaft fractures in the adult. The goals of surgical treatment are to achieve osseous union and to restore length, alignment, and rotation of the fractured tibia. Intramedullary nailing carries the advantage of minimal surgical dissection with appropriate preservation of blood supply to the fracture site. Materials and Methods: This is a prospective observational study conducted in the Department of Orthopedics, National Medical College and Teaching Hospital,Birgunj, Parsa, Nepal for the 1 year duration. Patients included in this study were above 16 years with Tibia shaft fracture with or without fibula fracture which includes Type I,II and IIIA of Gustilo-Anderson fracture. Patients with tibia shaft fracture were treated surgically by using intramedullary interlocking nail then follow up done in OPD at regular intervals during which radiographs was taken in appropriate views and diagnosis is established by functional and radiological means. Result: Out of 53 patients, 45 patients with Tibia shaft fracture are treated by closed intramedullary interlocking nailing in the National Medical College, Birgunj. Eight patients are lost during follow-up. In our study tibia shaft Fracture was more common in male (77.8%) than female which mostly involved 18-30 years of age group (62.2%) and most common cause was Road Traffic Accident (82.2%). Thirty cases (66.7%) had excellent and 10 cases (22.2%) had good healing and complication were seen in eight patients (17.7%). Conclusion: Closed interlocking tibia nailing allows earlier fracture union with less morbidity. Because of the high union rate and low infection rate, we consider closed interlocking nailing as the best mode of treatment for diaphyseal tibial fractures.

Popliteomeniscal fascicles tears with lateral meniscus instability: outcomes of arthroscopic surgical technique at mid-term follow-up.

The popliteomeniscal fascicles (PMFs) are a crucial part of the posterolateral corner of the knee. They provide stability to the lateral meniscus and stabilize the joint during tibial internal rotation. The clinical diagnosis of a torn PMFs is difficult, and magnetic resonance imaging (MRI) may be inconclusive as well. The aim of the present study was to report the outcomes of a continuous series of patients affected by PMF lesions and treated with an arthroscopic repair. Seventeen patients (average age of 22 ± 3.6years) with PMF lesions and lateral meniscus instability were prospectively enrolled. All patients were evaluated with clinical examination, International Knee Documentation Committee (IKDC), Lysholm and Tegner scores and 1.5T MRI. All patients had the same arthroscopic procedure consisting of meniscal repair with an all-inside meniscal repair system (mean 2.2 ± 0.77 anchors) and followed with the same postoperative protocol. All patients were available at a mean follow-up of 68 ± 24months (range 49-84months). Mean IKDC increased from 60.2 ± 13.5 to 83.1 ± 12, mean Lysholm score improved from 56.7 ± 8.2 to 89.8 ± 3.2, and mean Tegner score improved from 2.9 ± 1.3 to 6.5 ± 2. No intraoperative or postoperative complications were reported. MRI evaluation at 6-month follow-up showed successful healing of the menisco-popliteal fascicles in all cases. The diagnosis and treatment of tears of the PMFs is still debated. Diagnostic confirmation of tearing of the PMFs is usually determined at the time of arthroscopy. Meniscal repair with an all-inside meniscal repair system appears to be an excellent treatment option, since it yields good functional results at mid-term follow-up, no local complications, and complete radiographic healing at 6-month follow-up MRI. Further studies are needed to confirm these promising early results. Case series, 4.

Failure modes in malrotated total knee replacement.

Achieving normal rotational alignment of both components in total knee arthroplasty (TKA) is essential for improved knee survivorship and function. However, malrotation is a known complication resulting in higher revision rates. Understanding malrotation of the components and its concomitant clinical and functional outcomes are important for early diagnosis and management. The purpose of this study was to evaluate the effect of malrotation on clinical outcomes and failure modes in both single and combined rotational malalignment. From our hospital database of 364 revisions, a cohort of 76 knees with patellar maltracking, stiffness, reduced range of motion and early aseptic failure were reviewed and investigated for component malrotation using computed tomography following Berger protocol. CT findings confirmed component malrotation in 70 of these patients. Investigations included (1) measurement of femoral component malrotation using surgical transepicondylar axis, (2) measurement of tibial component malrotation using anteroposterior axis and (3) measurement of combined component rotational errors. The correlation of CT analysis and clinical outcomes after primary TKA revealed association of patellar maltracking with femoral internal rotation, pain and instability with tibial internal rotation and knee stiffness in patients with combined component malrotation as the commonest mode of presentation. Our study showed that patients with isolated femoral, tibial and combined malrotation presented at a mean period of 3.4 ± 1.34, 1.7 ± 0.8 and 2.3 ± 0.69years, respectively, after the index surgery. Post-revision, the mean Knee Society Score and Oxford Knee Score improved from 29.1 to 78.7, and 10.5 to 32.8, respectively, and the mean range of motion improved from 74.9 ± 24.8 to 97.1 ± 12.7 degrees at a mean follow-up of 42months. Early detection of malrotation in TKA and its management with revision of both components can lead to better clinical and functional outcomes. III.

In Vivo Knee Kinematics in Patients With Arthrofibrosis After Anterior Cruciate Ligament Reconstruction

Context: Arthrofibrosis after anterior cruciate ligament (ACL) reconstruction can be detrimental to the knee joint function and patient outcomes. However, the effects of arthrofibrosis on the in vivo tibiofemoral and patellofemoral joint kinematics after ACL reconstruction remain unclear. Objective: The objective of this study was to quantify the in vivo knee kinematics during a dynamic lunge task in the knee with arthrofibrosis after ACL reconstruction. Methods: Eleven patients with arthrofibrosis in one knee after ACL reconstruction participated in this study. Computed tomography and dual fluoroscopic imaging were used to evaluate in vivo kinematics of affected and contralateral knees during a lunge task. Differences in 6 degrees of freedom tibiofemoral kinematics and patellar tracking between limbs were assessed via repeated-measures analysis of variance. Results: Internal tibial rotation (5.2° vs 7.5°, respectively; P &lt; .001) and inferior patellar shift (24.6 mm vs 28.9 mm, respectively; P &lt; .001) were significantly lower in the arthrofibrotic knee compared with the contralateral knee from 15° to 75° of knee flexion. The patella in the arthrofibrotic knee significantly less flexed by 9.1° (P = .009) throughout the measured ROM and less laterally tilted by 3° (P = .017) compared with the contralateral knee from 30° to 75° of knee flexion. Conclusions: A significant superior shift and medial tilt of the patella were found in the affected knee compared with those in the contralateral knee during the dynamic lunge. Decreased internal tibial rotation and patellar flexion were found in knees with arthrofibrosis following ACL reconstruction; whether these kinematic changes are caused by arthrofibrosis need further investigation.

Differences between men and women in coupled subtalar and tibiofemoral joint kinematics during gait revealed through dynamic biplane radiography

It has been suggested that subtalar and tibiofemoral kinematics are coupled, such that abnormal subtalar inversion during the impact and push-off portions of stance may affect tibial rotation, leading to abnormal compensatory knee motion. This study aimed to characterize tibiofemoral and subtalar coupled motion and to determine if sex-dependent differences exist in lower extremity coupled motion. Twenty young adults were imaged at 100 frames/s using dynamic biplane radiography while walking. Lower extremity CT scans were obtained and segmented into subject-specific 3D bone models. Digitally reconstructed radiographs generated from the models were matched to the biplane radiographs via a validated tracking process to obtain tibiofemoral and subtalar joint kinematics. Subtalar inversion/eversion was strongly associated with tibiofemoral internal/external rotation and tibiofemoral ab/adduction during impact and push-off (P < 0.001). Men reached neutral subtalar and tibiofemoral orientation at midstance, while women remained more inverted at the subtalar joint and more externally rotated at the tibiofemoral joint. The rate of tibiofemoral ab/adduction to subtalar eversion differed between sexes during push-off (P = 0.005). Women underwent subtalar inversion, as well as tibiofemoral internal rotation and adduction during push-off, while men underwent only subtalar inversion and tibiofemoral internal rotation, with effectively no tibiofemoral adduction. These results provide the first quantitative evidence characterizing subtalar and tibiofemoral coupled motion. Differences in coupled motion trajectories between men and women may be associated with the higher incidence of knee-related pathology in women. These novel findings may serve as a standard for comparison when evaluating patients with patellofemoral pain.

Moderate External Rotation of Tibial Component Generates More Natural Kinematics Than Internal Rotation After Total Knee Arthroplasty.

This study aimed to investigate the influence of tibial malrotation on knee kinematics after total knee arthroplasty (TKA). A symmetric fixed-bearing posterior-stabilized prosthesis was implanted in the validated knee model with different rotational alignments of the tibial component (neutral, 3° external rotation, 5° external rotation, 3° internal rotation, and 5° internal rotation). Computational kinematic simulations were used to evaluate the postoperative kinematics of the knee joint including anteroposterior translation femoral condyles and axial rotation of tibial component during 0°–135° knee flexion. The results revealed that the neutral position of the tibial component was not the closest kinematics to the intact knee, the model with 5° external rotation of the tibial component showed the closest lateral condyle translation and tibial axial rotation, and moderate external rotation could improve the kinematics after TKA.

The Effects of Lower Extremity Rotational Malalignment on Pediatric Patient-reported Outcomes Measurement and Information System (PROMIS) Scores.

Background:There is sparse literature demonstrating the relationship between lower limb pediatric idiopathic rotational malalignment (IRM) and patient-reported outcomes measurement information system (PROMIS) scores. Our goal is to determine and quantify the amount that IRM deformities, as measured with the 3D gait analysis, affect childrens’ pain interference, mobility, and peer relationship PROMIS domains. Secondary outcomes include investigating the potential relationships between IRM and various subgroups (Pediatric Outcomes Data Collection Instrument (PODCI), gender, Body Mass Index (BMI), femur Versus tibia). We also examine whether the PROMIS domains correlate with PODCI in this population.Methods:This study was a retrospective cohort, single institution, and consecutively recruited cases series. We identified 47 children over a 3-year period who were evaluated at the motion analysis center at our tertiary care hospital, with increased torsion of the femur or tibia. After exclusions, 25 children with IRM, documented PROMIS data and gait analysis were considered.Results:Femoral malrotation had a significant relationship with female gender (P=0.001) and increased BMI (P<0.001). Femoral malrotation had a correlation with PROMIS pain interference (P=0.016), whereas tibial rotation did not achieve significance (P=0.084). In the ANOVA regression analysis, there was a strong prediction of the PROMIS mobility domain when both malrotation and pain interference were present (P=0.007). There were Pearson Correlations of PROMIS and PODCI domains for Mobility Versus Sports (P=0.007) and Pain Interference Versus Comfort/Pain (P=0.004), respectively.Conclusion:The evident relationship between lower limb rotational malalignment and PROMIS scores signifies the likelihood for gait and pain disturbance. This in turn could show us that children are likely to be more debilitated and thus may benefit from timely correction. We aim to conduct this as a multicentre trial to confirm our findings.Level of Evidence:Level IV.

Medial congruent polyethylene design show different tibiofemoral kinematics and enhanced congruency compared to a standard symmetrical cruciate retaining design for total knee arthroplasty-an in vivo randomized controlled study of gait using dynamic radiostereometry.

New total knee arthroplasty implant designs attempt to normalize kinematics patterns that may improve functional performance and patient satisfaction. It was hypothesized that a more medial congruent (MC) anatomic bearingdesign (1) influences the tibiofemoral kinematics and (2) enhances articular congruency compared to a standard symmetrical cruciate retaining (CR) bearing design. In this double-blinded randomized study, 66 patients with knee osteoarthritis were randomly included in two groups: MC (n = 31) and CR (n = 33). Clinical characteristics such as knee ligament lesions and knee osteoarthritis scores were graded on preoperative magnetic resonance imaging and radiography. At the 1-year follow-up, dynamic radiostereometric analysis was used to assess tibiofemoral joint kinematics and articulation congruency. Patient-reported outcome measures, Oxford Knee Score, the Forgotten Joint Score, and the Knee Osteoarthritis Outcome Score, were assessed preoperatively and at the 1-year follow-up. Compared to the CR bearing, the MC bearing displayed an offset with approximately 3mm greater anterior tibial drawer (p < 0.001) during the entire motion, and up to approximately 3.5 degrees more tibial external rotation (p = 0.004) from mid-swing to the end of the gait cycle at the 1-year follow-up. Furthermore, the congruency area in the joint articulation was larger during approximately 80% of the gait cycle for the MC bearing compared to the CR. The patient-reported outcome measures improved (p < 0.001), but there were no differences between groups. In addition, there were no differences in clinical characteristics and there were no knee revisions or recognized deep infections during follow-up. The study demonstrates that the MC-bearing design changes tibiofemoral kinematics and increases the area of congruency towards more native knee kinematics than the CR bearing. In perspective this may contribute to a more stabilized knee motion, restoring the patient's confidence in knee function during daily activities.

Poster 231: Lateral Extra-articular Tenodesis Provides Supraphysiological Restraint to Internal Tibial Rotation: In vitro Biomechanical Assessment

Objectives:Lateral extra-articular tenodesis (LET) reduces ACL graft failure rates two years after surgery when performed as an adjunct to ACL reconstruction (ACLR). Interestingly, previous biomechanical studies have shown that LET may reduce tibial rotation beyond that of the intact knee, while others found no such kinematic overconstraint. Parameters of ligament engagement have proven useful in characterizing the biomechanical function of the ACL and the anterolateral ligament; however, they have not been used to describe the biomechanics of LET. In this study, we compared engagement parameters (engagement point, in situ stiffness, and tissue force at peak applied load) of an LET-reconstructed knee compared to the native lateral tissues in response to an internal rotation torque at 0°, 30°, 60°, and 90° of knee flexion.Methods:Seven cadaveric knees (mean age: 39 ± 12; range: 28-54; 4 male) were mounted to a robotic manipulator. The robot applied an internal rotation torque of 5 Nm while monitoring the resulting internal tibial rotation (ITR) (in degrees). Each knee was tested following a bone-patellar tendon-bone ACL reconstruction with intact lateral tissues (consisting of the anterolateral ligament and Kaplan fibers) and after sectioning these tissues and performing LET (modified Lemaire technique). Resultant forces carried by the native lateral tissues and the LET were determined via superposition. The parameters of engagement were determined for both the native lateral tissues and the LET and compared via two-way repeated measures ANOVA (p < 0.05).Results:During an internal rotation test at full extension (0° of flexion), both the LET-reconstructed and native lateral tissues did not engage. At 30°, 60°, and 90° knee flexion, the native lateral tissues exhibited more in situ slack than the LET-reconstructed lateral tissues. Specifically, the native lateral tissues had 8° (p < 0.001), 13° (p < 0.001), and 14° (p < 0.001) more in situ slack than the LET-reconstructed lateral tissues at 30°, 60°, and 90° knee flexion, respectively. At 30° of flexion, the LET-reconstructed lateral tissues were 9° (p < 0.001) and 10° (p < 0.001) more slack than at 60° and 90° knee flexion. Across all three tested knee flexion angles (30°, 60°, and 90°), the LET-reconstructed lateral tissues had greater in situ stiffness than the native lateral tissues. The LET carried greater force at the peak applied internal rotation torque by 29 N at 30° of flexion (p = 0.006), but no statistical differences were identified at the other flexion angles.Conclusions:LET creates a supraphysiologic restraint to the native lateral tissues by engaging with less internal tibial rotation than the native lateral tissue at all flexion angles tested but full extension. The LET also carried greater force at the peak applied load and had a greater in situ stiffness at 30° of flexion than the native lateral tissues. On the whole, LET is a supraphysiological restraint to internal tibial rotation at 30° of flexion. The engagement point of LET may be modified surgically by altering the flexion angle, degree of tibial rotation at which the tenodesis is fixed, and/or the tension applied. Thus, discrepancies between previous biomechanical studies may arise from variations in one or more of these modifiable surgical parameters.Figure 1.Mean tissue force versus internal tibial rotation response of the LET and native lateral tissues with applied internal rotation torque at 0,30,60, and 90° of knee flexion. Whiskers represent one standard deviation. Engagement point denoted in yellow. Tissue force at peak applied internal tibial rotation torque denoted in blue.

Paper 80: Biomechanical Analysis of Tibial Motion and ACL Graft Forces After ACLR With and Without LET at Varying Tibial Slopes

Objectives:Lateral extra-articular tenodesis (LET) is being performed more frequently with anterior cruciate ligament reconstruction (ACLR) to decrease graft failure rates. Posterior tibial slope (PTS) affects ACL graft failure rates.2 The impact of LET plus ACLR on tibial motion and graft forces with increasing PTS has not been elucidated. We hypothesized LET will decrease anterior tibial translation (ATT), tibial rotation, and ACL graft force versus ACLR alone with increasing tibial slope throughout knee range of motion.Methods:Twelve cadaveric knees (40.5 mean age, all female) were tested in four conditions (intact, ACL cut, ACLR, ACLR + LET) with varying PTS (5°, 10°, 15°, 20°) at three flexion angles (0°, 30°, 60°). Specimens were mounted to a load frame which applied a 500-N axial load with 1 Nm of internal rotation (IR) torque (Figure 1). The amount of tibial translation, IR, and graft forces were measured.Results:Increasing PTS revealed a linear and statistically significant increase in graft force at all flexion angles. LET reduced graft force by 8.3% (6N) compared to ACLR alone at 30° of flexion. At the same position, slope-correcting osteotomy reduced graft force by 17-22% per 5° of slope correction, with a 46% reduction seen from 20° to 5°slope correction. For ATT, ACLR returned tibial translation to pre-injury levels, as did ACLR + LET at all flexion angles, except full extension where ACLR + LET over-reduced ATT by 2.47mm (p<0.05).Conclusions:Increased PTS was confirmed to increase graft forces linearly. Additionally, while the ACLR + LET reduced graft force compared to ACLR alone, slope correcting osteotomies are a more powerful method to minimize graft force. No other clinically significant differences were noted between ACLR with or without LET in regards to graft force, ATT, or IR. Many authors have proposed LET in the setting of ACLR, revision surgery, hyperlaxity, high grade pivot shift and elevated PTS, but the indications remain unclear. The biomechanical performance of LET plus ACLR at varying PTSs may impact daily practice and provide clarity on these indications.

Relationship Between Posterior Tibial Slope and Lower Extremity Biomechanics During a Single-Leg Drop Landing Combined With a Cognitive Task in Athletes After ACL Reconstruction.

Background:A steeper posterior tibial slope (PTS) is an important risk factor for anterior cruciate ligament (ACL) reinjury. The PTS may affect lower extremity biomechanics under competition-like conditions for athletes with a reconstructed ACL.Hypothesis:It was hypothesized that the PTS would be associated with lower extremity biomechanics, which may increase ACL strain.Study Design:Descriptive laboratory study.Methods:Included were 10 athletes (mean age, 20.9 ± 1.8 years) who had undergone ACL reconstruction. The authors recorded the 3-dimensional lower extremity biomechanics while participants performed a single-leg drop jump with the Stroop task (dual task). Kinematic and kinetic data were analyzed and compared between the involved and contralateral limbs. The medial and lateral PTSs were measured using magnetic resonance imaging scans of the involved knee. The correlation between the biomechanical data and the PTS in each knee was evaluated.Results:The lateral PTS was significantly correlated with the maximum hip adduction moment (r = 0.64; P < .05) and maximum internal tibial rotation angle (r = 0.71; P < .05) in the involved limb. There were no differences in kinematic and kinetic data between the involved and contralateral limbs.Conclusion:In athletes after ACL reconstruction, the lateral PTS was directly associated with the maximum internal tibial rotation angle during single-leg drop landing with a cognitive task.Clinical Relevance:The findings in this study indicate that a steeper lateral PTS may cause internal rotation of the tibia during landing, which may be associated with reinjury in athletes with a reconstructed ACL.