Tibial Attachment Site Research Articles

Association Between Knee Flexor Strength and Preservation of the Tibial Attachment of the Sartorial Fascia During Hamstring Tendon Harvest.

During anterior cruciate ligament (ACL) reconstruction, there are various autograft options. Donor-site morbidity is an important consideration while deciding the type of the autograft. Gracilis and semitendinosus autografts are commonly used in ACL reconstruction, resulting in weakness of the hamstring muscle. We hypothesized that if we preserved the tibial insertion site of the sartorial fascia (SF) during hamstring tendon harvest, there would be better recovery of knee flexor strength. Case-control study; Level of evidence, 3. In this retrospective study, 34 patients (aged 20-59 years) underwent ACL reconstruction using hamstring tendon autograft with 2 different incision techniques on the SF. The tibial attachment site of the SF was preserved in 17 patients. The insertion site of the muscle was incised transversely in 17 patients. The follow-up duration was ≥2 years. Patients were recalled to the institute for examination and muscle strength assessment. The results were compared between the groups in terms of flexor and extensor knee isokinetic muscle strength at 60 and 180 deg/s. There was no statistical difference between the groups in terms of age, sex, or body mass index. When compared with patients whose SF attachment site was incised, patients with a preserved SF tibial insertion were found to have a higher flexion peak torque at the angular speed of 180 deg/s (P < 002). No statistically significant difference was noted at 60 deg/s. During collection of gracilis and semitendinosus autografts, preserving the SF tibial attachment site was associated with better knee flexion peak torque.

Functional Outcome of Arthroscopic Suture Pull-Out Fixation in Tibial Spine Avulsion of Anterior Cruciate Ligament.

Tibial spine avulsion of the anterior cruciate ligament is a rare intraarticular injury of the knee. In this condition, the tibial attachment site of the anterior cruciate ligament is detached from the knee. The mechanism of the injury is hyperextension of the knee and rotation with valgus force. There are so many treatment options. This study aims to find out the functional outcome of Arthroscopic Suture pull-out fixation in this injury. This is a retrospective study done from August 15, 2019, to August 14, 2022. The outcome was analyzed by comparing the preoperative and 12-month postoperative International Knee Documentation Committee Score, Tegner Lysholm Score, Knee Range of motion, and Visual Analog Scale Score. Twenty-two patients were included with a mean age of 18.95 (13-31). Among them 15(68.2%) were male and 7(31.8%) were female. Arthroscopic suture pull-out fixation was done in all the cases. The knee range of motion was improved from preoperatively 35.00±7.86 to 135.68±3.50 at the final follow-up. The Tegner Lysholm score was improved from preoperatively 34.68±1.28 to 94.54±2.97 at the final follow-up. Preoperatively the VAS score was 8.04±1.27 which improved to 0.60±0.50 at the final follow-up. The IKDC score was 23.86±1.42 preoperatively which improved to 92.72±3.28 at the final follow-up with p-value < 0.001 Conclusions: Arthroscopic Suture pull-out fixation of tibial spine avulsion of the Anterior cruciate ligament is a good technique that restores the functions of the knee and has an excellent outcome Keywords: Anterior cruciate ligament; suture pull-out fixation; tibial spine avulsion.

X-Shaped Knot Fixation and Double Posteromedial Portals for the Treatment of Posterior Cruciate Ligament Tibial Avulsion Fractures With Retention of the Posterior Septum

Posterior cruciate ligament (PCL) avulsion fractures at the tibial attachment site are managed using various techniques. Some surgeries involve internal fixation with an adjustable double-loop plate, anterior-to-posterior suture suspension fixation, hollow lag screw fixation, and steel wire fixation. In this case, an X-shaped knot and double posteromedial portals are used to retain the posterior septum for fixation. In this technique, we describe double posteromedial portals are used in this method. The internal joint is fixed with an X-shaped knot, and the external joint is fixed with SwiveLock, which puts the wire belt binding PCL compression bone block in a perfect tension state. This surgical technique can achieve a sound functional reduction.

Anatomical Tissue Engineering of the Anterior Cruciate Ligament Entheses.

The firm integration of anterior cruciate ligament (ACL) grafts into bones remains the most demanding challenge in ACL reconstruction, since graft loosening means graft failure. For a functional-tissue-engineered ACL substitute to be realized in future, robust bone attachment sites (entheses) have to be re-established. The latter comprise four tissue compartments (ligament, non-calcified and calcified fibrocartilage, separated by the tidemark, bone) forming a histological and biomechanical gradient at the attachment interface between the ACL and bone. The ACL enthesis is surrounded by the synovium and exposed to the intra-articular micromilieu. This review will picture and explain the peculiarities of these synovioentheseal complexes at the femoral and tibial attachment sites based on published data. Using this, emerging tissue engineering (TE) strategies addressing them will be discussed. Several material composites (e.g., polycaprolactone and silk fibroin) and manufacturing techniques (e.g., three-dimensional-/bio-printing, electrospinning, braiding and embroidering) have been applied to create zonal cell carriers (bi- or triphasic scaffolds) mimicking the ACL enthesis tissue gradients with appropriate topological parameters for zones. Functionalized or bioactive materials (e.g., collagen, tricalcium phosphate, hydroxyapatite and bioactive glass (BG)) or growth factors (e.g., bone morphogenetic proteins [BMP]-2) have been integrated to achieve the zone-dependent differentiation of precursor cells. However, the ACL entheses comprise individual (loading history) asymmetric and polar histoarchitectures. They result from the unique biomechanical microenvironment of overlapping tensile, compressive and shear forces involved in enthesis formation, maturation and maintenance. This review should provide a road map of key parameters to be considered in future in ACL interface TE approaches.

Outcome of Arthroscopic All-Inside Posterior Cruciate Ligament Reconstruction Using the Posterior Trans-Septal Approach.

Posterior Cruciate Ligament (PCL) reconstruction is a complex surgical procedure and often challenging. The newer posterior trans-septal portal technique is thought to make tibial tunnel preparation easier with better visualization of the tibial attachment site. It is also thought to lower the risk of neurovascular injuries. The aim of this study was to evaluate the functional and clinical outcomes of patients who underwent arthroscopic all-inside PCL reconstruction using the posterior trans-septal portal at our institute. This was a retrospective study with prospectively collected data between 2016 and 2020. Data collected were age, gender, types of graft used, range of movement, posterior drawer test grade, KOOS score, Lysholm knee scoring scale, and post-operative complications. All patients underwent pre- and post-operative PCL rehabilitation. A total of 36 patients (26 males and 10 females) were identified from our database. The mean age was 35.2years. Mean time from injury to surgery was 20months. Mean follow-up was 41.2months (range, 13-72months). Twenty cases involved multi-ligament injuries and another 16 patients had isolated PCL injury. Post-operative mean posterior drawer test grade improved from 2.7 to 0.7 (p < 0.001). Knee range of movement was 116.3 degrees pre-operatively and 115.6 degrees postoperatively (p = 0.814). Lysholm knee scoring scale improved from 50.9 to 91.0 (p < 0.001). KOOS score improved from 65.1 to 77.2 (p = 0.196). One patient required manipulation under anesthesia for stiffness. No patients needed any additional surgical procedures. All PCLs were clinically intact at the final follow-up. Greater visualization of the PCL tibial attachment minimizes the 'killer turn' giving a huge advantage to this technique. Arthroscopic all-inside PCL reconstruction using the posterior trans-septal portal technique is a safe, reliable and reproducible procedure. From our study, it shows that post-operative clinical and functional outcomes improved significantly.

A balance between native footprint coverage and overlap of the anterolateral meniscal root in tibial tunnel positioning during anterior cruciate ligament reconstruction: A 3D MRI study

BackgroundTibial footprint of anterior cruciate ligament (ACL) is situated close to the anterior lateral meniscal root (ALMR) attachment. PurposeTo investigate the impact of the size and location of the tibial tunnel for ACL reconstruction on the ACL footprint coverage and overlap to the ALMR. Study designControlled laboratory study. MethodsTwenty knee MRI scans from twenty healthy subjects were recruited, and three-dimensional (3D) tibia models were created to show the tibial attachment sites of ACL and ALMR. Surgical simulation of the tibial tunnel drilling was performed on each 3D model, entering the joint at an angle set at 60 degrees from the tibial plateau plane and 55 degrees from the posterior tibial condylar axis, with analysis for six different drill sizes; 7.5, 8, 8.5, 9, 9.5 and 10 mm; and nine locations; the center of the ACL attachment and eight locations 2% of the tibial width apart surrounding it. The width of the tibial plateau, the distance between ACL and ALMR attachment centers, and the size and location of the potential tibial tunnel were evaluated to determine association with the area of the ACL footprint coverage and ALMR overlap using a linear mixed effects model. ResultsA large tunnel (p <.001), a central and anterior location (p <.029), and small tibial width (p =.015) were all associated with larger coverage of the ACL footprint. A large tunnel (p <.001), posteriorly and laterally located (p ≤ 0.001), and a small distance between the ACL and ALMR centers (p =.001) were significantly associated with a larger ALMR overlap. The association of the tunnel size to ALMR overlap reduced with a medial tunnel location. ConclusionsThe short distance between the centers of the ALMR attachment and native ACL footprint suggests that the ALMR will always be susceptible to overlap when the tibial tunnel is drilled in ACL reconstruction. Small alterations in tunnel location can lead to a statistically significant alteration with the amount of ALMR overlap. To minimize this overlap, whilst maintaining acceptable coverage of the ACL footprint, a tibial tunnel positioned in a medial or anteromedial location from the center of the ACL footprint is recommended.

Arthroscopic Direct Anterior-to-Posterior Suture Suspension Fixation for the Treatment of Posterior Cruciate Ligament Tibial Avulsion Fracture.

ObjectivesA posterior cruciate ligament (PCL) avulsion fracture of the tibial attachment site is a specific type of PCL injury that is difficult and unpleasant to manage. The objective of this study is to report the preliminary results of a newly developed technique: arthroscopic endobutton‐suture fixation using a single tibial tunnel.MethodsFrom January 2016 to January 2018, 120 patients with PCL avulsion fracture who met our criteria were recruited. Sixty cases were treated by arthroscopic direct anterior‐to‐posterior suture suspension fixation (endobutton‐suture group), and 60 cases were treated by arthroscopic screw‐suture fixation (screw‐suture group). All radiographic studies were recorded. The curative effect was evaluated by the range of motion (ROM), KT‐2000, International Knee Documentation Committee (IKDC) scores, Tegner activity scale, and Lysholm scoring system. For statistical analysis the Student t‐test was used.ResultsThe average follow‐up duration was 24 months. Findings and difficulties in surgery are the following. The lax anterior cruciate ligament is one of the diagnostic criteria. The anatomic location of PCL avulsion fractures is deep and surrounded by nerves and vessels; thus, operating through this region is difficult. After each tunnel drilling, the debris at the edge of opening needs to be cleaned to avoid obscuring the operator's vision or wearing the sutures. In endobutton‐suture group, ROM improved from 0° preoperatively to 140.0° ± 5.6° at the last follow‐up (P < 0.001). The postoperative KT‐2000 arthrometric data at 90 N were available for all patients. The IKDC score was 23.6 ± 2.6 and 91.4 ± 4.1 pre‐ and postoperatively, respectively. The Tegner score improved from 1.2 ± 0.6 to 7.3 ± 2.3 (p < 0.001). The median Lysholm knee score increased from 40.4 ± 5.2 preoperatively to 90.1 ± 10.1 postoperatively (p < 0.001). The operative time was shorter in the endobutton‐suture group (p < 0.001). The Lysholm knee score in the endobutton‐suture group was lower than that in the endobutton‐suture group (3.1 ± 1.2 vs. 4.2 ± 1.8, p < 0.01). No significant complications were noted in the study.ConclusionsThe arthroscopic direct anterior‐to‐posterior suture suspension fixation is a simple and reliable method that not only provides better clinical outcomes, but also fixes avulsion fragments of any size.

Meniscal Root Tears: An Update Focused on Preoperative and Postoperative MRI Findings.

Meniscal root tears represent radial tears or avulsions of the meniscal cartilage at the tibial attachment site that profoundly affect meniscal biomechanics and kinematics. Meniscal root tears have the functional effect of a total meniscectomy and can lead to rapid degenerative change with development of early knee osteoarthritis (OA). A growing range of arthroscopic surgical techniques have been developed to repair meniscal root tears with the aim of restoring joint kinematics and contact pressures and delaying the development of OA. With increased understanding of the anatomy and biomechanics of the meniscal root, meniscal root injury repair has become the treatment of choice in knees with nonadvanced OA. This article reviews the anatomy and biomechanics of the meniscal roots, clinical and imaging diagnostic criteria of meniscal root tears, correlation between arthroscopy and MRI in the diagnosis and classification of meniscal root tears, and expected and abnormal MRI findings after meniscal root repair. Familiarity with MRI signs and classifications of meniscal root tears, as well as with root repair surgical techniques, can aid radiologists in correctly reporting preoperative and postoperative MRI findings.

Outcome of Isolated PCL Tibial Avulsion Fractures Treated with Cannulated Cancellous Screw Fixation

Background: The posterior cruciate ligament (PCL) presents commonly as avulsion fractures from the tibial attachment site. Isolated tears of the PCL can be caused by a fall on the flexed knee or dashboard injury in road traffic accident. Such a mechanism (the upper tibia driven posteriorly with the knee flexed) may produce PCL disruption as the only clinically detectable instability. For the PCL avulsion fractures fixation, there are various methods available like closed reduction and internal fixation (CRIF), open reduction and internal fixation (ORIF), and arthroscopic fixation. This study was performed to assess the result of PCL avulsion fracture managed with ORIF with cannulated cancellous screw.&#x0D; Methods: We performed ORIF using cannulated cancellous screws with the posterior approach in 11 patients with isolated PCL tibial avulsion injuries. The minimum follow-up period was 6 months. The results were assessed radiologically and clinically. The spectrum of outcomes following PCL tibial avulsion fracture were measure using the Lysholm knee scoring system and range of motion (ROM) of the knee joint.&#x0D; Results: 63.6, 27.3, and 9.1 percent of the cases had excellent, good, and moderate fracture healing, respectively.&#x0D; Conclusion: PCL tibial avulsion fractures managed with open reduction with cannulated cancellous screw fixation yields good functional outcome with less complications.

Anterolateral Structure Reconstructions With Different Tibial Attachment Sites Similarly Improve Tibiofemoral Kinematics and Result in Different Graft Force in Treating Knee Anterolateral Instability

To compare the biomechanical effects of anterolateral structure reconstructions (ALSRs) with different tibial attachments on tibiofemoral kinematics and anterolateral structure (ALS) graft forces. Eight cadaveric knees were tested in a customized knee testing system, using a novel pulley system to simulate more muscle tensions by loading the iliotibial band at 30 N and quadriceps at 10 N in all testing states. Anterior stability during anterior load and anterolateral rotatory stability during 2 simulated pivot-shift tests (PST1 and PST2) were evaluated in 5 states: intact, ALS-deficient (Def), ALSR-Ta (anterior tibial site), ALSR-Tm (middle tibial site), and ALSR-Tp (posterior tibial site). Tibiofemoral kinematics and resulting ALS graft forces against the applied loads were measured and compared in the corresponding states. In anterior load, 3 ALSRs mitigated the anterior laxities of the ALS Def state at all degrees, which were close to intact state at 0° and 30° but showed significantly overconstraints at 60° and 90°. In both PSTs, all ALSRs significantly reduced the anterolateral rotatory instability of ALS Def, whereas the significant overconstraints were detected in ALSR-Ta and ALSR-Tm at greater knee flexion angles. All ALS grafts carried forces in resisting anterior and pivot-shift loads. Only ALS graft force in ALSR-Ta increased continuously with knee flexion angles. The ALS graft forces carried by ALSR-Ta were significantly larger than those by ALSR-Tp and ALSR-Tm when resisting anterior load and PSTs at greater knee flexion angles. ALSRs with different tibial attachment sites similarly restored knee laxities close to the native tibiofemoral kinematics in an ALS-deficient knee, whereas the ALSR-Tp showed less propensity for overconstraining the knee at greater flexion angles. The ALS graft in ALSR-Ta carried more forces than those in ALSR-Tp and ALSR-Tm against simulated loads. Altering the tibial attachment sites of ALSRs may not significantly affect tibiofemoral kinematics at most degrees whereas the posterior may have less overconstraints at greater flexion angles. However, ALS graft positioning at a more anterior tibial attachment site may carry more forces in resisting anterior and pivot-shift loads.

Meniscal Root Tears: An Update Focused on Preoperative and Postoperative MRI Findings

Meniscal root tears represent radial tears or avulsions of the meniscal cartilage at the tibial attachment site that profoundly affect meniscal biomechanics and kinematics. Meniscal root tears have the functional effect of a total meniscectomy and can lead to rapid degenerative change with development of early knee osteoarthritis (OA). A growing range of arthroscopic surgical techniques have been developed to repair meniscal root tears with the aim of restoring joint kinematics and contact pressures and delaying the development of OA. Following increased understanding of the anatomy and biomechanics of the meniscal root, meniscal root injury repair has become the treatment of choice in knees with nonadvanced OA. This article reviews the anatomy and biomechanics of the meniscal roots, clinical and imaging diagnostic criteria of meniscal root tears, correlation between arthroscopy and MRI in the diagnosis and classification of meniscal root tears, and expected and abnormal MRI findings after meniscal root repair. Familiarity with MRI signs and classifications of meniscal root tears, as well as with root repair surgical techniques, can aid radiologists in correctly reporting preoperative and postoperative MRI findings.

АНТЕРОЛАТЕРАЛЬНАЯ СВЯЗКА КАК РОТАЦИОННЫЙ СТАБИЛИЗАТОР КОЛЕННОГО СУСТАВА. РОЛЬ МРТ И УЗИ В ПОНИМАНИИ ЕЕ АНАТОМИИ И В ВЫБОРЕ ТАКТИКИ ХИРУРГИЧЕСКОГО ЛЕЧЕНИЯ ЕЕ ПОВРЕЖДЕНИЙ

Objective. To assess the variability of the anterolateral ligament according to MRT and ultrasonography data and to coordinate it with surgical treatment strategy for its injuries. Methods. The anterolateral ligament was analyzed on 100 series of MRI images of knee joints without traumatic pathology on Philips Achieva 1.5 T tomograph using the standard research protocol in three mutually perpendicular planes and 150 series of MRT images of knee joints with injuries and without injuries of the anterolateral ligament obtained on different tomographs from 0.2 to 3 Tesla. The quality of visualization of anterolateral ligament separate portions, the number of layers, and the contact with the joint capsule were evaluated. Both knee joints were analyzed by ultrasonography in 30 patients with anterior cruciate ligament injuries of one of the knee-joint and in 30 patients with intact knee-joints. Results. During the studies in the identification of anterolateral ligament with magnetic resonance tomography (MRT 1.5T)it was revealed at least partially in 92% of cases (in 68% as a two-layer structure; in 24% as a single-layer structure; in 14% as a thickening of the capsule or in 10% as a separate extracapsular structure), ultrasound examination - in 100% (the structure was not determined, however, in 26.67% of patients without clinically pronounced pathology of the knee-joint and significant trauma in anamnesis ultrasound scan revealed a violation of the integrity of the cortical layer at the tibial attachment site), Conclusion. According to MRT and ultrasonography data, the anterolateral ligament is a constant structure of the knee-joint, but very variable in its anatomical parameters, which in some cases may be poorly visualized on MRT, may have a two-layer structure, may be located either extracapsular or as a thickening of the knee-joint capsule. The variability of its anatomical structure makes it impossible to make the theoretical substantiation of the advantages of one separate method of its restoration, but, on the contrary, justifies a differentiated approach to the selection of optimal surgical treatment. What this paper adds With the help of current research methods, the normal anatomical parameters and anatomical variants of the anterolateral ligament of the knee joint have been clarified and detailed. It is necessary to emphasize the importance of a differentiated approach to choosethe optimal methods of surgical treatment for its injuries.

Assessment of Anterolateral Ligament of the Knee After Primary Versus Revision Anterior Cruciate Ligament Reconstruction.

Background:The anterolateral ligament of the knee (ALL) is a component of the lateral complex that stabilizes the structure against rotational force and may be associated with the outcome of anterior cruciate ligament (ACL) reconstruction (ACLR).Purpose:To (1) find whether the visibility of the structure of the ALL is different in primary and revision ACLR groups, (2) determine whether the abnormal findings of the ALL structure on magnetic resonance imaging (MRI) scans are associated with type of trauma in ACL injury and mode of graft failure, and (3) determine whether there are differences in knee functional scores between patients with or without abnormal findings of the ALL structure on MRI scans in primary and revision ACLR groups.Study Design:Cohort study; Level of evidence, 3.Methods:This retrospective study included 40 patients who underwent primary ACLR and 39 patients who underwent revision ACLR. Conventional MRI (1.5-T) scans taken before primary or revision ACLR were obtained and analyzed for visibility of the ALL, frequency and degree of injury of the ALL, and ALL signal anomalies. We also evaluated 1-year postoperative functional knee scores using the subjective International Knee Documentation Committee and Lysholm scores.Results:Visibility of the ALL was better in the primary ACLR group than the revision ACLR group (38% vs 14%; P = .041). The primary ACLR group showed a lower degree of injury across the femoral, meniscal, and tibial attachment sites than did the revision ACLR group (30% vs 13%, 41% vs 8%, and 62% vs 26%, respectively). Relative signal anomaly of the ALL was more frequent in the case of contact versus noncontact trauma of the ACL (85% vs 15%; P = .035), while absolute signal anomaly was equally observed between cases of contact and noncontact trauma in the primary ACLR group (50% vs 50%). No association was observed between ALL signal anomalies and 1-year postoperative functional knee scores.Conclusion:The revision ACLR group offered less visibility and showed a tendency for more frequent, higher degree of injury to the structure of the ALL. Regardless of observational differences between the 2 groups, no definite relevance was observed between the image and the functional outcome. For the assessment of the ALL, routinely performed conventional MRI alone is insufficient to make a clinical decision.

In vivo three-dimensional isometry analysis of suture attachment sites for extracapsular suture stabilization of the canine stifle.

The study aimed to perform isometry analysis of a selection of suture attachment points for extracapsular stabilization with three-dimensional (3D) measurements and normal gait kinematics of the stifle joint. Thirteen client-owned dogs were recruited. Fluoroscopic images of the stifle during treadmill walking and computed tomography of the same joint were acquired. Stifle kinematics were reconstructed using 3D model-based fluoroscopic analysis. Variability of the distance between the femoral and tibial attachment sites across gait cycles was evaluated. The maximum length variation (MLV) and maximum length percent variation (MLPV) were quantified and used to determine the level of isometry of the attachment site combinations. A selection of combinations with lower mean MLV (<2.5mm) or MLPV(<8%) was identified from 315 combinations, and all the combinations involved femoral attachment sites near the distal pole of the lateral fabella. The combinations also involving tibial attachment sites near the proximal tibial crest showed improved isometry, with an MLPV<6%. Combinations using attachment sites around the distal pole of the lateral fabella and proximal tibial crest or caudal to the long digit extensor groove appeared to have improved isometry.

Medial collateral ligament reconstruction graft isometry is effected by femoral position more than tibial position

PurposeThe purpose of this study was to examine the length change patterns of the native medial structures of the knee and determine the effect on graft length change patterns for different tibial and femoral attachment points for previously described medial reconstructions.MethodsEight cadaveric knee specimens were prepared by removing the skin and subcutaneous fat. The sartorius fascia was divided to allow clear identification of the medial ligamentous structures. Knees were then mounted in a custom-made rig and the quadriceps muscle and the iliotibial tract were loaded, using cables and hanging weights. Threads were mounted between tibial and femoral pins positioned in the anterior, middle, and posterior parts of the attachment sites of the native superficial medial collateral ligament (sMCL) and posterior oblique ligament (POL). Pins were also placed at the attachment sites relating to two commonly used medial reconstructions (Bosworth/Lind and LaPrade). Length changes between the tibiofemoral pin combinations were measured using a rotary encoder as the knee was flexed through an arc of 0–120°.ResultsWith knee flexion, the anterior fibres of the sMCL tightened (increased in length 7.4% ± 2.9%) whilst the posterior fibres slackened (decreased in length 8.3% ± 3.1%). All fibre regions of the POL displayed a uniform lengthening of approximately 25% between 0 and 120° knee flexion.The most isometric tibiofemoral combination was between pins placed representing the middle fibres of the sMCL (Length change = 5.4% ± 2.1% with knee flexion). The simulated sMCL reconstruction that produced the least length change was the Lind/Bosworth reconstruction with the tibial attachment at the insertion of the semitendinosus and the femoral attachment in the posterior part of the native sMCL attachment side (5.4 ± 2.2%). This appeared more isometric than using the attachment positions described for the LaPrade reconstruction (10.0 ± 4.8%).ConclusionThe complex behaviour of the native MCL could not be imitated by a single point-to-point combination and surgeons should be aware that small changes in the femoral MCL graft attachment position will significantly effect graft length change patterns. Reconstructing the sMCL with a semitendinosus autograft, left attached distally to its tibial insertion, would appear to have a minimal effect on length change compared to detaching it and using the native tibial attachment site. A POL graft must always be tensioned near extension to avoid capturing the knee or graft failure.

Length change pattern of the medial structures of the knee and related reconstructions

Introduction:Aim of the study was to investigate the length changes of the medial structures and related reconstructions. It was assumed that the three fibre sections (anterior/middle/posterior) of the superficial medial collateral ligament (sMCL) have different length change patterns, which cannot be imitated by current reconstructions.Hypotheses:The three fibre sections (anterior/middle/posterior) of the superficial medial collateral ligament (sMCL) cannot be imitated by current reconstructions.Methods:Measurements were made on eight cadaveric knees. The knee joints were clamped in a custom-made open chain extension structure. For this purpose, the portions of the quadriceps and the iliotibial tract were aligned according to their fibre direction and statically loaded using hanging weights. The respective tibial and femoral insertion points of the sMCL anterior/middle/posterior fibres were marked by small pins. Similarly, pins were inserted at the tibial and femoral attachment sites of the posterior oblique ligament (POL). In order to imitate the Lind reconstruction, a pin was additionally inserted on the tibial semitendinosus insertion site. Pin combinations accounting for the anterior/middle/posterior sMCL, the POL, and the Lind reconstruction were connected using a high resistant suture. Then the length change patterns were measured using a rotary encoder from 0-120° knee flexion. Statistical analysis was performed using 2-way repeated-measures ANOVA and a post-hoc Bonferroni correction (p <0.05).Results:The anterior and posterior fibres of the sMCL showed a reciprocal behaviour (p< 0.001). The anterior fibres showed a length reduction (2%) up to a flexion of 20°, followed by an elongation of 5% at 120° flexion, which means that the anterior fibres are tight in knee flexion. Conversely, the posterior fibres of the MCL showed an initial length reduction of 4% at 20° flexion. This was followed by an isometric range (20° - 80°) and a further length reduction of 8% in deep flexion (120°). Thus, the posterior fibres of the MCL were tight in extension.The three parts of the POL showed a constant reduction of 25% between 0° and 120°. The Lind reconstruction with the tibial pin at the semitendinosus insertion site showed similar length changes compared to the sMCL (n.s.). Furthermore, the Lind reconstruction was dependent on the femoral placement of the pins (p <.001). The tibial placement had no significant influence.Conclusion:The anterior portion of the sMCL was tight in flexion, whereas the posterior portion was tight in extension. This reciprocal behavior could not be imitated by a single point to point reconstruction. When surgically applying these reconstructions, special attention should be paid to the femoral insertion.

Meniscal and ligament modifications in spontaneous and post-traumatic mouse models of osteoarthritis

BackgroundOsteoarthritis (OA) is a whole joint disease that affects all joint tissues, with changes in the articular cartilage (AC), subchondral bone and synovium. Pathologies in menisci and ligaments, however, are rarely analysed, although both are known to play vital roles in the mechanical stability of the joint. The aim of our study was to describe the pathological changes in menisci and ligament during disease development in murine spontaneous and post-traumatic surgically induced OA and to quantify tissue mineralisation in the joint space using micro-computed tomography (μCT) imaging during OA progression.MethodsKnees of Str/ort mice (spontaneous OA model; 26–40 weeks) and C57CBA F1 mice following destabilisation of medial meniscus (DMM) surgery (post-traumatic OA model; 8 weeks after DMM), were used to assess histological meniscal and ligament pathologies. Joint space mineralised tissue volume was quantified by μCT.ResultsMeniscal pathological changes in Str/ort mouse knees were associated with articular cartilage lesion severity. These meniscal changes included ossification, hyperplasia, cell hypertrophy, collagen type II deposition and Sox9 expression in the fibrous region near the attachment to the knee joint capsule. Anterior cruciate ligaments exhibited extracellular matrix changes and chondrogenesis particularly at the tibial attachment site, and ossification was seen in collateral ligaments. Similar changes were confirmed in the post-traumatic DMM model. μCT analysis showed increased joint space mineralised tissue volume with OA progression in both the post-traumatic and spontaneous OA models.ConclusionsModifications in meniscal and ligament mineralisation and chondrogenesis are seen with overt AC degeneration in murine OA. Although the aetiology and the consequences of such changes remain unknown, they will influence stability and load transmission of the joint and may therefore contribute to OA progression. In addition, these changes may have important roles in movement restriction and pain, which represent major human clinical symptoms of OA. Description of such soft tissue changes, in addition to AC degradation, should be an important aspect of future studies in mouse models in order to furnish a more complete understanding of OA pathogenesis.

Providing Graft Tension in ACL Reconstruction with Preservation of the Hamstring Tibial Attachment Site: A Report on the Technique and Clinical Results

Providing Graft Tension in ACL Reconstruction with Preservation of the Hamstring Tibial Attachment Site: A Report on the Technique and Clinical Results

A comparative study of a new “off-centre:off-centre” technique of transtibial ACL reconstruction with “centre:centre” transportal ACL reconstruction

Background & introductionA Single Bundle ACL Reconstruction aims at placing Tibial and Femoral attachment sites of graft from Centre of Native Tibial Foot-print to Centre of Native Femoral Footprint. In tibial tunnel independent Transportal Reconstruction, where the two points are chosen separately, the objective is easily achievable. In Tibial tunnel dependent Transtibial ACL reconstruction, Capture of Centre of femoral tunnel is dictated by Trajectory of Tibial Tunnel. Heming et al. remarked that a TT technique could produce tunnel centred in the both the tibial and femoral footprint but only if a starting point “prohibitively close” to the joint line with a correspondingly short tibial tunnel were used. A new technique wherein authors aim to place the mouths of Tibial & Femoral tunnel at off-centre location, taking care to contain these tunnels still within native footprints to achieve a tunnel which is of adequate length and does not come too close to the joint and saves MCL from violation. ObjectiveTo study the clinic-radiological outcome of a new “Off-centre to Off-centre” method of Transtibial Reconstruction and compare the results with “centre to centre” method of Transportal reconstruction. MethodsA prospective randomised comparative study of consecutive 75 clinico-radiological cases of ACL tear with definitive clinical symptoms of knee instability who underwent arthroscopic ACL reconstruction by Same Arthroscopy Surgeon was conducted between 2016 and 2018. A modification, as described herein below, was used in Transtibial technique with placement of centre of mouth of internal opening of tibial tunnel “off-centre” that allowed a predictable capture of Femoral Footprint in “off-centre” location without tunnel being too close to joint line. Only those cases were included in which the mouths of tunnel were completely contained within footprints. Capture of footprints was verified during arthroscopy. 11 cases were excluded because either the native footprint was not clearly delineated, or surgeon failed to completely contain the mouth of tunnel/socket within the delineated footprint of tibia or femur. Hence 64 patients, 32 each in Transtibial & Transportal group were enrolled into the study. The results were analysed with the objective to arrive at recommendations for improving capture of anatomical footprints at both ends by Transtibial technique. ResultsThere were no statistically significant differences in Clinical outcome scores. However there were statistically significant differences in length of Femoral Tunnel, Obliquity of Femoral tunnel as well as Femoral Tunnel Placements. Likewise, Tibial Tunnel Angle in AP & Lateral View as well as Tibial tunnel placement were also significantly different. ConclusionIt is concluded that tunnels follow much different trajectories in the bones in two techniques and trying to apply “Centre of Tibial footprint to Centre of Femoral footprint” philosophy of Transportal technique may be imprudent for Transtibial Technique. An “Off-centre to Off-centre but contained within Footprints” may afford a more predictable and reliable capture of anatomical foot prints without any adverse effect on outcomes.

Evaluating the Accuracy of Tibial Tunnel Placement After Anatomic Single-Bundle Anterior Cruciate Ligament Reconstruction

Background: Anatomic anterior cruciate ligament (ACL) reconstruction improves knee kinematics and joint stability in symptomatic patients who have ACL deficiency. Despite a concerted effort to place the graft within the ACL’s native attachment sites, the accuracy of tunnel placement using contemporary techniques is not well established. Purpose: To use 3-dimensional magnetic resonance imaging (3D MRI) to prospectively evaluate the accuracy of tibial tunnel placement after anatomic ACL reconstruction. Study Design: Case series; Level of evidence, 4. Methods: Forty patients with symptomatic, ACL-deficient knees were prospectively enrolled in the study and underwent 3D MRI of both their injured and uninjured knees before and after surgery through use of a validated imaging protocol. The root ligament of the anterior horn of the lateral meniscus was used as a radiographic reference, and the center of the reconstructed graft was compared with that of the contralateral normal knee. The tunnel angles and intra-articular graft angles were also measured, as was the percentage overlap between the native tibial footprint and tibial tunnel. Results: The reconstructed tibial footprint was placed at a mean ± SD of 2.14 ± 2.45 mm (P < .001) medial and 5.11 ± 3.57 mm (P < .001) posterior to the native ACL footprint. The mean distance between the center of the native and reconstructed ACL at the tibial attachment site was 6.24 mm. Of the 40 patients, 18 patients had a tibial tunnel that overlapped more than 50% of the native footprint, and 10 patients had maximal (100%) overlap. Further, 22 of the 40 patients had less than 50% overlap with the native footprint, and in 12 patients the footprint was missing completely. Conclusion: Despite the use of contemporary surgical techniques to perform anatomic ACL reconstruction, a significant positioning error in tibial tunnel placement remains.