Three-dimensional Tissue Constructs Research Articles

Development of an alginate–chitosan biopolymer composite with dECM bioink additive for organ-on-a-chip articular cartilage

In vitro use of articular cartilage on an organ-on-a-chip (OOAC) via microfluidics is challenging owing to the dense extracellular matrix (ECM) composed of numerous protein moieties and few chondrocytes, which has limited proliferation potential and microscale translation. Hence, this study proposes a novel approach for using a combination of biopolymers and decellularised ECM (dECM) as a bioink additive in the development of scalable OOAC using a microfluidic platform. The bioink was tested with native chondrocytes and mesenchymal stem cell-induced chondrocytes using biopolymers of alginate and chitosan composite hydrogels. Two-dimensional (2D) and three-dimensional (3D) biomimetic tissue construction approaches have been used to characterise the morphology and cellular marker expression (by histology and confocal laser scanning microscopy), viability (cell viability dye using flow cytometry), and genotypic expression of ECM-specific markers (by quantitative PCR). The results demonstrated that the bioink had a significant impact on the increase in phenotypic and genotypic expression, with a statistical significance level of p < 0.05 according to Student’s t-test. The use of a cell-laden biopolymer as a bioink optimised the niche conditions for obtaining hyaline-type cartilage under culture conditions, paving the way for testing mechano-responsive properties and translating these findings to a cartilage-on-a-chip microfluidics system.

A highly stable, pressure-driven, flow control system based on Coriolis mass flow sensors for organs-on-chips

Stable delivery of liquids to microfluidic systems is essential for their reproducible functioning, especially when supplying flows to organs-on-chips – delicate living models that recreate human physiology on the microscale and thus can be used to reduce the need for animal testing. Most flow control systems are unable to sustain a robust and stable flow in longer experiments (>1 week), particularly those based on the ubiquitous syringe pump. Though easy to use, syringe pumps have no mechanism for actually measuring flow, let alone flow regulation with sensor feedback. We have developed a liquid delivery system based on the generation of flow by applying a constant air pressure to liquids in sealed containers. A flow of liquid is monitored by accurate measurement of mass flows (mg/min) using downstream Coriolis-based mass flow sensors. Measured mass flows provide fast feedback to integrated valves, with valves opening or closing slightly to increase or decrease solution flows to the organs-on-chips as required. This mass flow sensing principle is not affected by changes in the density, temperature, and viscosity of the liquids being displaced. This is in contrast to systems that use volumetric flow sensors, which require recalibration when these parameters change. The rationale behind using this principle for organs-on-chips, is that the stability provided by this flow control system allows for more control over growth of these mini-organs. We demonstrate the functionality of this system with three examples: 1) Fast stabilization (within seconds) under changing physical conditions; 2) Short-term stability (minutes to hours) of delivered flows in a microreactor with interconnected inlets; and 3) Long-term stability (>1 week) of cell medium flows to a living organ-on-a-chip. Two categories of organs-on-chips (OOCs) can be distinguished: 1) solid OOC are designed for three-dimensional cell or tissue constructs that interact with each other and their surroundings, and 2) barrier-type OOC contain a selective cellular barrier between two compartments as do many barriers in the body. The latter of these two types is the most challenging to culture and maintain as they are very sensitive to variations in flow and pressure surges. The flow control system presented in this work provides a great improvement compared to the use of syringe pumps and volumetric flow sensors in OOC studies. The novelty of this work lies in the long-term stability use of this system for organs-on-chips, maintaining stability for short to very long periods of time without compromising the barrier function of the organ-on-chip by pressure surges, bacterial contamination, or other undesired effects from the flow delivery system.

Optimizing cell deposition for inkjet-based bioprinting

Although inkjet-based bioprinting enables precise drop-on-demand cell deposition within three-dimensional (3D) tissue constructs and facilitates critical cell&amp;ndash;cell and cell&amp;ndash;matrix interactions, it faces challenges such as poor cell homogeneity and low cell viability. To date, there is a lack of comprehensive review papers addressing the optimization of cell deposition in inkjet-based bioprinting. This review aims to fill that gap by providing an overview of various critical aspects in bioprinting, ranging from bio-ink properties to the impact of printed droplets. The bio-ink section begins by exploring how cells influence the physical properties of bio-inks and emphasizes the significance of achieving cell homogeneity within bio-inks to ensure consistent and reliable printing. The discussion then delves into inkjet-based printing chambers (thermal and piezoelectric), the effect of shear stress on printed cells, droplet formation dynamics, the influence of polymer-based and cell-laden droplets on the underlying substrate surface, and the dynamics of droplet impact. Beyond droplet formation and impact, the review highlights the importance of biophysical and biological cues within 3D hydrogel matrices for cell proliferation and differentiation. Finally, the paper highlights current and potential applications, with a specific focus on skin and lung tissue engineering using inkjet-based bioprinting techniques, and provides insights into the emerging role of machine learning in optimizing the cell deposition process for inkjet-based bioprinting.

3D-Bioprinted GelMA Scaffold with ASCs and HUVECs for Engineering Vascularized Adipose Tissue.

The purpose of tissue engineering is to reconstruct parts of injured tissues and to resolve the shortage of organ donations. However, the main concern is the limited size of engineered tissue due to insufficient oxygen and nutrition distribution in large three-dimensional (3D) tissue constructs. To provide better support for cells inside the scaffolds, the vascularization of blood vessels within the scaffold could be a solution. This study compared the effects of different culturing systems using human adipose tissue-derived stem/stromal cells (ASCs), human umbilical vein endothelial cells (HUVECs), and coculture of ASCs and HUVECs in 3D-bioprinted gelatin methacrylate (GelMA) hydrogel constructs. The in vitro results showed that the number of live cells was highest in the coculture of ASCs and HUVECs in the GelMA hydrogel after culturing for 21 days. Additionally, the tubular structure was the most abundant in the GelMA hydrogel, containing both ASCs and HUVECs. In the in vivo test, blood vessels were present in both the HUVECs and the coculture of ASCs and HUVECs hydrogels implanted in mice. However, the blood vessel density was the highest in the HUVEC and ASC coculture groups. These findings indicate that the 3D-bioprinted GelMA hydrogel coculture system could be a promising biomaterial for large tissue engineering applications.

Breast Cancer Cell Type and Biomechanical Properties of Decellularized Mouse Organs Drives Tumor Cell Colonization.

Tissue engineering has emerged as an indispensable tool for the reconstruction of organ-specific environments. Organ-derived extracellular matrices (ECM) and, especially, decellularized tissues (DCL) are recognized as the most successful biomaterials in regenerative medicine, as DCL preserves the most essential organ-specific ECM properties such as composition alongside biomechanics characterized by stiffness and porosity. Expansion of the DCL technology to cancer biology research, drug development, and nanomedicine is pending refinement of the existing DCL protocols whose reproducibility remains sub-optimal varying from organ to organ. We introduce a facile decellularization protocol universally applicable to murine organs, including liver, lungs, spleen, kidneys, and ovaries, with demonstrated robustness, reproducibility, high purification from cell debris, and architecture preservation, as confirmed by the histological and SEM analysis. The biomechanical properties of as-produced DCL organs expressed in terms of the local and total stiffness were measured using our facile methodology and were found well preserved in comparison with the intact organs. To demonstrate the utility of the developed DCL model to cancer research, we engineered three-dimensional tissue constructs by recellularization representative decellularized organs and collagenous hydrogel with human breast cancer cells of pronounced mesenchymal (MDA-MB-231) or epithelial (SKBR-3) phenotypes. The biomechanical properties of the DCL organs were found pivotal to determining the cancer cell fate and progression. Our histological and scanning electron microscopy (SEM) study revealed that the larger the ECM mean pore size and the smaller the total stiffness (as in lung and ovary), the more proliferative and invasive the mesenchymal cells became. At the same time, the low local stiffness ECMs (ranged 2.8-3.6 kPa) did support the epithelial-like SKBR-3 cells' viability (as in lung and spleen), while stiff ECMs did not. The total and local stiffness of the collagenous hydrogel was measured too low to sustain the proliferative potential of both cell lines. The observed cell proliferation patterns were easily interpretable in terms of the ECM biomechanical properties, such as binding sites, embedment facilities, and migration space. As such, our three-dimensional tissue engineering model is scalable and adaptable for pharmacological testing and cancer biology research of metastatic and primary tumors, including early metastatic colonization in native organ-specific ECM.

3D Organoids for Regenerative Endodontics.

Apical periodontitis is the inflammation and destruction of periradicular tissues, mediated by microbial factors originating from the infected pulp space. This bacteria-mediated inflammatory disease is known to interfere with root development in immature permanent teeth. Current research on interventions in immature teeth has been dedicated to facilitating the continuation of root development as well as regenerating the dentin-pulp complex, but the fundamental knowledge on the cellular interactions and the role of periapical mediators in apical periodontitis in immature roots that govern the disease process and post-treatment healing is limited. The limitations in 2D monolayer cell culture have a substantial role in the existing limitations of understanding cell-to-cell interactions in the pulpal and periapical tissues. Three-dimensional (3D) tissue constructs with two or more different cell populations are a better physiological representation of in vivo environment. These systems allow the high-throughput testing of multi-cell interactions and can be applied to study the interactions between stem cells and immune cells, including the role of mediators/cytokines in simulated environments. Well-designed 3D models are critical for understanding cellular functions and interactions in disease and healing processes for future therapeutic optimization in regenerative endodontics. This narrative review covers the fundamentals of (1) the disease process of apical periodontitis; (2) the influence and challenges of regeneration in immature roots; (3) the introduction of and crosstalk between mesenchymal stem cells and macrophages; (4) 3D cell culture techniques and their applications for studying cellular interactions in the pulpal and periapical tissues; (5) current investigations on cellular interactions in regenerative endodontics; and, lastly, (6) the dental-pulp organoid developed for regenerative endodontics.

3D-Printed Hybrid Collagen/GelMA Hydrogels for Tissue Engineering Applications.

Bioprinting is an emerging technology involved in the fabrication of three-dimensional tissue constructs for the repair and regeneration of various tissues and organs. Collagen, a natural protein found abundantly in the extracellular matrix of several tissues, can be extracted from collagen-rich tissues of animals such as sheep, cows, rats, pigs, horses, birds, and marine animals. However, due to the poor printability of collagen bioinks, biocompatible collagen scaffolds that mimic the extracellular matrix (ECM) are difficult to fabricate using bioprinting techniques. Gelatin methacrylate (GelMA), a semi-synthetic polymer with tunable physical and chemical properties, has been found to be a promising biomaterial in various bioprinting applications. The printability of collagen can be improved by combining it with semi-synthetic polymers such as GelMA to develop hybrid hydrogels. Such hybrid hydrogels printed have also been identified to have enhanced mechanical properties. Hybrid GelMA meshes have not previously been prepared with collagen from ovine sources. This study provides a novel comparison between the properties of hybrid meshes with ovine skin and bovine hide collagen. GelMA (8% w/v) was integrated with three different concentrations (0.5%, 1%, and 2%) of bovine and ovine collagen forming hybrid hydrogels inks that were printed into meshes with enhanced properties. The maximum percentage of collagen suitable for integration with GelMA, forming hybrid hydrogels with a stable degradation rate was 1%. The water-soluble nature of ovine collagen promoted faster degradation of the hybrid meshes, although the structural crosslinking was identified to be higher than bovine hybrid meshes. The 1% bovine collagen hybrid meshes stood out in terms of their stable degradation rates.

Air-loaded Gas Vesicle Nanoparticles Promote Cell Growth in Three-dimensional Bioprinted Tissue Constructs.

Three-dimensional (3D) bioprinting has emerged as a promising method for the engineering of tissues and organs. Still, it faces challenges in its widespread use due to issues with the development of bioink materials and the nutrient diffusion barrier inherent to these scaffold materials. Herein, we introduce a method to promote oxygen diffusion throughout the printed constructs using genetically encoded gas vesicles derived from haloarchaea. These hollow nanostructures are composed of a protein shell that allows gases to permeate freely while excluding the water flow. After printing cells with gas vesicles of various concentrations, the cells were observed to have increased activity and proliferation. These results suggest that air-filled gas vesicles can help overcome the diffusion barrier throughout the 3D bioprinted constructs by increasing oxygen availability to cells within the center of the construct. The biodegradable nature of the gas vesicle proteins combined with our promising results encourage their potential use as oxygen-promoting materials in biological samples.

Development of human-derived, three-dimensional respiratory epithelial tissue constructs with perfusable microvasculature on a high-throughput microfluidics screening platform

The COVID-19 pandemic has highlighted the need for human respiratory tract-based assay platforms for efficient discovery and development of antivirals and disease-modulating therapeutics. Physiologically relevant tissue models of the lower respiratory tract (LRT), including the respiratory bronchioles and the alveolar sacs, are of high interest because they are the primary site of severe SARS-CoV-2 infection and are most affected during the terminal stage of COVID-19. Current epithelial lung models used to study respiratory viral infections include lung epithelial cells at the air–liquid interface (ALI) with fibroblasts and endothelial cells, but such models do not have a perfusable microvascular network to investigate both viral infectivity and viral infection-induced thrombotic events. Using a high throughput, 64-chip microfluidic plate-based platform, we have developed two novel vascularized, LRT multi-chip models for the alveoli and the small airway. Both models include a perfusable microvascular network consisting of human primary microvascular endothelial cells, fibroblasts and pericytes. The established biofabrication protocols also enable the formation of differentiated lung epithelial layers at the ALI on top of the vascularized tissue bed. We validated the physiologically relevant cellular composition, architecture and perfusion of the vascularized lung tissue models using fluorescence microscopy, flow cytometry, and electrical resistance measurements. These vascularized, perfusable microfluidic lung tissue on high throughput assay platforms will enable the development of respiratory viral infection and disease models for research investigation and drug discovery.

Designer DNA biomolecules as a defined biomaterial for 3D bioprinting applications.

DNA has excellent features such as the presence of functional and targeted molecular recognition motifs, tailorability, multifunctionality, high-precision molecular self-assembly, hydrophilicity, and outstanding biocompatibility. Due to these remarkable features, DNA has emerged as a leading next-generation biomaterial of choice to make hydrogels by self-assembly. In recent times, novel routes for the chemical synthesis of DNA, advances in tailorable designs, and affordable production ways have made DNA as a building block material for various applications. These advanced features have made researchers continuously explore the interesting properties of pure and hybrid DNA for 3D bioprinting and other biomedical applications. This review article highlights the topical advancements in the use of DNA as an ideal bioink for the bioprinting of cell-laden three-dimensional tissue constructs for regenerative medicine applications. Various bioprinting techniques and emerging design approaches such as self-assembly, nucleotide sequence, enzymes, and production cost to use DNA as a bioink for bioprinting applications are described. In addition, various types and properties of DNA hydrogels such as stimuli responsiveness and mechanical properties are discussed. Further, recent progress in the applications of DNA in 3D bioprinting are emphasized. Finally, the current challenges and future perspectives of DNA hydrogels in 3D bioprinting and other biomedical applications are discussed.

Radially Aligned Porous Silk Fibroin Scaffolds as Functional Templates for Engineering Human Biomimetic Hepatic Lobules.

Bioengineering functional hepatic tissue constructs that physiologically replicate the human native liver tissue in vitro is sought for clinical research and drug discovery. However, the intricate architecture and specific biofunctionality possessed by the native liver tissue remain challenging to mimic in vitro. In the present study, a versatile strategy to fabricate lobular-like silk protein scaffolds with radially aligned lamellar sheets, interconnected channels, and a converging central cavity was designed and implemented. A proof-of-concept study to bioengineer biomimetic hepatic lobules was conducted through coculturing human hepatocytes and primary endothelial cells on these lobular-like scaffolds. Relatively long-term viability of hepatocyte/endothelial cells was found along with cell alignment and organization in vitro. The hepatocytes showed special epithelial polarity and bile duct formation, similar to the liver plate, while the aligned endothelial cells generated endothelial networks, similar to natural hepatic sinuses. This endowed the three-dimensional (3D) tissue constructs with the capability to recapitulate hepatic-like parenchymal-mesenchymal growth patterns in vitro. More importantly, the cocultured hepatocytes outperformed monocultures or monolayer cultures, displaying significantly enhanced hepatocyte functions, including functional gene expression, albumin (ALB) secretion, urea synthesis, and metabolic activity. Thus, this functional unit with a biomimetic phenotype provides a novel technology for bioengineering biomimetic hepatic lobules in vitro, with potential utility as a building block for bioartificial liver (BAL) engineering or as a robust tool for drug metabolism investigation.

A Systematically Reduced Mathematical Model for Organoid Expansion.

Organoids are three-dimensional multicellular tissue constructs. When cultured in vitro, they recapitulate the structure, heterogeneity, and function of their in vivo counterparts. As awareness of the multiple uses of organoids has grown, e.g. in drug discovery and personalised medicine, demand has increased for low-cost and efficient methods of producing them in a reproducible manner and at scale. Here we focus on a bioreactor technology for organoid production, which exploits fluid flow to enhance mass transport to and from the organoids. To ensure large numbers of organoids can be grown within the bioreactor in a reproducible manner, nutrient delivery to, and waste product removal from, the organoids must be carefully controlled. We develop a continuum mathematical model to investigate how mass transport within the bioreactor depends on the inlet flow rate and cell seeding density, focusing on the transport of two key metabolites: glucose and lactate. We exploit the thin geometry of the bioreactor to systematically simplify our model. This significantly reduces the computational cost of generating model solutions, and provides insight into the dominant mass transport mechanisms. We test the validity of the reduced models by comparison with simulations of the full model. We then exploit our reduced mathematical model to determine, for a given inlet flow rate and cell seeding density, the evolution of the spatial metabolite distributions throughout the bioreactor. To assess the bioreactor transport characteristics, we introduce metrics quantifying glucose conversion (the ratio between the total amounts of consumed and supplied glucose), the maximum lactate concentration, the proportion of the bioreactor with intolerable lactate concentrations, and the time when intolerable lactate concentrations are first experienced within the bioreactor. We determine the dependence of these metrics on organoid-line characteristics such as proliferation rate and rate of glucose consumption per cell. Finally, for a given organoid line, we determine how the distribution of metabolites and the associated metrics depend on the inlet flow rate. Insights from this study can be used to inform bioreactor operating conditions, ultimately improving the quality and number of bioreactor-expanded organoids.

Composite Materials by Building Block Chemistry Using Weak Interaction

Abstract Layer-by-Layer (LbL) assembly of interactive polymers onto surfaces leads to the construction of multilayered ultrathin films, which can be done simply by alternately dipping the substrate into various solutions. The range of applications of this LbL assembly can be broadened by introducing molecular recognition mechanisms for polymers and proteins, and by using weak interactions such as van der Waals interactions and biological recognition. As a specific example, it can be applied to the formation of stereocomplexes of poly(methyl methacrylate) (PMMA), poly-lactide (PLA), and fibronectin-collagen as extracellular matrix proteins. In weakly interacting LbL assemblies, the polymer chain tends to be placed in the most structurally stable state. This feature has been successfully used for template polymerization of stereoregular polymers, significant morphological control of biodegradable nanomaterials, and fabrication of three-dimensional (3D) cellular tissue constructs. LbL assembly based on weak interactions is expected to further stimulate interest in the interdisciplinary fields of bioscience and polymer chemistry. Using LbL technology to create functional 3D tissues, such as skin models (LbL-3D Skin) and heart models (LbL-3D Heart), will be a breakthrough in science and technology.

Coaxial Electrohydrodynamic Bioprinting of Pre-vascularized Cell-laden Constructs for Tissue Engineering.

Recapitulating the vascular networks that maintain the delivery of nutrition, oxygen, and byproducts for the living cells within the three-dimensional (3D) tissue constructs is a challenging issue in the tissue-engineering area. Here, a novel coaxial electrohydrodynamic (EHD) bioprinting strategy is presented to fabricate thick pre-vascularized cell-laden constructs. The alginate and collagen/calcium chloride solution were utilized as the outer-layer and inner-layer bioink, respectively, in the coaxial printing nozzle to produce the core-sheath hydrogel filaments. The effect of process parameters (the feeding rate of alginate and collagen and the moving speed of the printing stage) on the size of core and sheath lines within the printed filaments was investigated. The core-sheath filaments were printed in the predefined pattern to fabricate lattice hydrogel with perfusable lumen structures. Endothelialized lumen structures were fabricated by culturing the core-sheath filaments with endothelial cells laden in the core collagen hydrogel. Multilayer core-sheath filaments were successfully printed into 3D porous hydrogel constructs with a thickness of more than 3 mm. Finally, 3D pre-vascularized cardiac constructs were successfully generated, indicating the efficacy of our strategy to engineer living tissues with complex vascular structures.

3D bioprinted human iPSC-derived somatosensory constructs with functional and highly purified sensory neuron networks

Engineering three-dimensional (3D) sensible tissue constructs, along with the complex microarchitecture wiring of the sensory nervous system, has been an ongoing challenge in the tissue engineering field. By combining 3D bioprinting and human pluripotent stem cell (hPSC) technologies, sensible tissue constructs could be engineered in a rapid, precise, and controllable manner to replicate 3D microarchitectures and mechanosensory functionalities of the native sensory tissue (e.g. response to external stimuli). Here, we introduce a biofabrication approach to create complex 3D microarchitecture wirings. We develop an hPSC-sensory neuron (SN) laden bioink using highly purified and functional SN populations to 3D bioprint microarchitecture wirings that demonstrate responsiveness to warm/cold sense-inducing chemicals and mechanical stress. Specifically, we tailor a conventional differentiation strategy to our purification method by utilizing p75 cell surface marker and DAPT treatment along with neuronal growth factors in order to selectively differentiate neural crest cells into SNs. To create spatial resolution in 3D architectures and grow SNs in custom patterns and directions, an induced pluripotent stem cell (iPSC)-SN-laden gelatin bioink was printed on laminin-coated substrates using extrusion-based bioprinting technique. Then the printed constructs were covered with a collagen matrix that guided SNs growing in the printed micropattern. Using a sacrificial bioprinting technique, the iPSC-SNs were seeded into the hollow microchannels created by sacrificial gelatin ink printed in the gelatin methacryloyl supporting bath, thereby demonstrating controllability over axon guidance in curved lines up to several tens of centimeters in length on 2D substrates and in straight microchannels in 3D matrices. Therefore, this biofabrication approach could be amenable to incorporate sensible SN networks into the engineered skin equivalents, regenerative skin implants, and augmented somatosensory neuro-prosthetics that have the potential to regenerate sensible functions by connecting host neuron systems in injured areas.

Conductive Nanomaterials used in Bioinks for 3D Bioprinting

Biofabrication for tissue engineering and regenerative medicine is a rapidly evolving field that incorporates bioprinting or bioassembly for the development of biologically functional products with structural organization using cells, bioactive molecules, and biomaterials. Bioprinting is a biofabrication technology that utilizes biomaterials, living cells, and supporting materials, called bioink, to generate three-dimensional tissue constructs. Bioprinting offers several advantages over traditional scaffolding and microengineering methods such as precise architecture control, high reproducibility, and versatility. The ideal bioink should possess appropriate structural, mechanical, gelation, rheological, chemical, biological, degradation, and biomimetic properties for the desired application of the final product. Several natural and synthetic bioinks have been developed and this review has focused on conductive nanomaterials that have been used in combination with hydrogel materials for bioink synthesis.

Polyesters based on aspartic acid and poly(ethylene glycol): Functional polymers for hydrogel preparation

Hydrogels are commonly used as scaffolds for the preparation of three-dimensional tissue constructs and for the encapsulation and delivery of cells in regenerative medicine. Polyesters are an attractive class of polymers for hydrogel preparation. However, most polyesters have hydrophobic backbones and lack pendent groups that can be chemically functionalized. We describe here the development of water-soluble polyesters based on aspartic acid and poly(ethylene glycol) (PEG) (600 or 1500 g/mol), having pendent reactive amines. The reactivity of these amines with methacrylic anhydride, maleic anhydride, and itaconic anhydride was explored for the introduction of crosslinkable groups. The resulting methacrylamide-functionalized polymers were successfully crosslinked to form hydrogels using a redox-initiated free radical polymerization. The use of 10% (weight/volume) of polymer, and 10 mM of potassium persulfate and tetramethylethylenediamine led to high (>97%) gel content, and compressive moduli of 13–21 kPa. Human adipose-derived stromal cells were encapsulated during the crosslinking process and exhibited greater than 80% viability in the hydrogels prepared from the polyester containing 600 g/mol PEG, with lower viability observed for the polymer containing 1500 g/mol PEG. These results support the potential for aspartic acid-based copolymers with short PEG chains in the backbone to serve as a platform for cell encapsulation, with additional opportunities for further functionalization available in the future.

Neovascularization of engineered tissues for clinical translation: Where we are, where we should be?

One of the key challenges in engineering three-dimensional tissue constructs is the development of a mature microvascular network capable of supplying sufficient oxygen and nutrients to the tissue. Recent angiogenic therapeutic strategies have focused on vascularization of the constructed tissue, and its integration in vitro; these strategies typically combine regenerative cells, growth factors (GFs) with custom-designed biomaterials. However, the field needs to progress in the clinical translation of tissue engineering strategies. The article first presents a detailed description of the steps in neovascularization and the roles of extracellular matrix elements such as GFs in angiogenesis. It then delves into decellularization, cell, and GF-based strategies employed thus far for therapeutic angiogenesis, with a particularly detailed examination of different methods by which GFs are delivered in biomaterial scaffolds. Finally, interdisciplinary approaches involving advancement in biomaterials science and current state of technological development in fabrication techniques are critically evaluated, and a list of remaining challenges is presented that need to be solved for successful translation to the clinics.

Engineering in vitro human neural tissue analogs by 3D bioprinting and electrostimulation.

There is a fundamental need for clinically relevant, reproducible, and standardized in vitro human neural tissue models, not least of all to study heterogenic and complex human-specific neurological (such as neuropsychiatric) disorders. Construction of three-dimensional (3D) bioprinted neural tissues from native human-derived stem cells (e.g., neural stem cells) and human pluripotent stem cells (e.g., induced pluripotent) in particular is appreciably impacting research and conceivably clinical translation. Given the ability to artificially and favorably regulate a cell's survival and behavior by manipulating its biophysical environment, careful consideration of the printing technique, supporting biomaterial and specific exogenously delivered stimuli, is both required and advantageous. By doing so, there exists an opportunity, more than ever before, to engineer advanced and precise tissue analogs that closely recapitulate the morphological and functional elements of natural tissues (healthy or diseased). Importantly, the application of electrical stimulation as a method of enhancing printed tissue development in vitro, including neuritogenesis, synaptogenesis, and cellular maturation, has the added advantage of modeling both traditional and new stimulation platforms, toward improved understanding of efficacy and innovative electroceutical development and application.

Synergistic effect of three-dimensionalcoculture and photobiomodulation therapy on vascularized liver spheroid formation by stem cells.

Despite studies reporting functional differentiation of liver cells, a three-dimensional, vascularized liver organ has yet to be developed from mesenchymal stem cells. We investigated whether treatment with photobiomodulation (PBM) before three-dimensional liver spheroid transplantation improved the recovery of liver function via stimulation of angiogenesis and hepatocyte differentiation. Liver spheroids composed of hepatic, endothelial,and mesenchymal cells were subjected to PBM therapy. To evaluate the in vivo therapeutic effect of the liver spheroids treated with PBM, phosphate-buffered saline, liver spheroid, and PBM-treated liver spheroid were transplanted into a damaged host liver using conventional chimeric mouse models. To further characterize the maturation of transplanted PBM-liver spheroid compared with the newly generated non-PBM-liver spheroid or human liver tissues, the expression profiles of mature liver signature genes were analyzed. Liver spheroids expressed hepatocyte growth factors, including vascular endothelial growth factor and angiogenic factors. The cells in liver spheroid compensated for the low viability and improved the function of hepatocytes. Here, we demonstrate the formation of vascularized and functional human liver spheroid from human adipose-derived stem cellsby transplantation of liver tissue created in vitro. Albumin secretion by PBM-treated liver spheroid was higher on Day 28 compared with liver spheroid-seeded transplant group. PBM-liver spheroids serve as individual vascularization units, promoting the simultaneous development of new microvascular networks at different locations inside the implanted tissue constructs. The vasculature in the liver spheroid transplants became functional by connecting to the host vessels within 48 h. These PBM-liver spheroids may be useful in designing artificial three-dimensional hepatic tissue constructs and in cell therapy with limited numbers of human hepatocytes.