Three-dimensional Superimposition Research Articles

Evaluation of the accuracy of conventional and digital implant impression techniques in bilateral distal extension cases: a randomized clinical trial

BackgroundThis clinical study aims to evaluate the accuracy of the conventional implant impression techniques compared to the digital impression ones in bilateral distal extension cases.MethodsA total of 32 implants were placed in eight patients missing all mandibular posterior teeth except the first premolars. Each patient received a total of four implants, with two implants placed on each side, in order to provide support for three units of screw-retained zirconia restorations. Following osteointegration, the same patient underwent two implant-level impression techniques: Conventional open-tray impressions CII (splinted pick-up) and digital implant impressions DII with TRIOS 3 Shape intraoral scanner. The accuracy of impressions was evaluated utilizing a three-dimensional superimposition analysis of standard tessellation language (STL) files. Subsequently, the scan bodies were segmented using Gom inspect software to measure three-dimensional deviations in a color-coding map. Data were statistically analyzed using the Kruskal Wallis test and then a post-hoc test to determine the significance level (P < 0.05).ResultsThe study revealed that higher angular and positional deviations were shown toward distal scan bodies compared to mesial ones for both impression techniques. However, this difference was not statistically significant (P > 0.05).ConclusionSplinted open-tray conventional impression and intraoral scanning implant impression techniques have demonstrated comparable accuracy.Trial registrationClinical Trials.gov Registration ID NCT05912725. Registered 22/06/ 2023- Retrospectively registered, https://register.clinicaltrials.gov.

Protocol for facially guided digital orthodontic diagnosis and treatment planning

Protocol for facially guided digital orthodontic diagnosis and treatment planning

Effect of Duplication Techniques on the Fitting Accuracy of CAD-CAM Milled, 3D-Printed, and Injection-Molded Mandibular Complete Denture Bases.

Digital technology has been introduced in prosthodontics, and it has been widely used in denture duplication instead of a conventional denture duplication technique. However, research comparing different denture duplication techniques and how they affect the fitting accuracy of the denture base is scarce. The aim was to assess the impact of duplication techniques on the accuracy of the fitting surface of computer-aided design and manufacturing (CAD-CAM) milled, 3D-printed, and injection-molded complete denture bases (CDBs). This study involved fabricating a mandibular complete denture base with three marked dimples as reference marks (A, B, and C at the incisive papilla, right molar, and left molar areas) using a conventional compression molded technique. This denture was then scanned to generate a standard tessellation language (STL) file; after that, it was duplicated using three different techniques (milling, 3D printing, and injection molding) and five denture base resin materials-two milled CAD-CAM materials (AvaDent and IvoBase), two 3D-printed materials (NextDent and HARZ Labs), and one injection-molded material (iFlextm). Based on the denture base type, the study divided them into five groups (each with n = 10). An evaluation of duplication accuracy was conducted on the fitting surface of each complete denture base (CDB) using two assessment methods. The first method was a two-dimensional evaluation, which entailed linear measurements of the distances (A-B, A-C, and B-C) between reference points on both the scanned reference mandibular denture and the duplicated dentures. Additionally, a three-dimensional superimposition technique was employed, involving the overlay of the STL files of the dentures onto the reference denture's STL file. The collected data underwent statistical analysis using a one-way analysis of variance and Tukey's pairwise post hoc tests. Both evaluation techniques showed significant differences in fitting surface accuracy between the tested CDBs (p ˂ 0.001), as indicated by one-way ANOVA. In addition, the milled CDBs (AvaDent and IvoBase) had significantly higher fitting surface accuracy than the other groups (p ˂ 0.001) and were followed by 3D-printed CDBs (NextDent and HARZ Labs), while the injection-molded (iFlextm) CDBs had the lowest accuracy (p ˂ 0.001). The duplication technique of complete dentures using a CAD-CAM milling system produced superior fitting surface accuracy compared to the 3D-printing and injection-molded techniques.

Compensatory treatment for hyperdivergent skeletal Class II using temporary anchorage device

Introduction:Treatment of hyperdivergent skeletal Class II is one of the most challenging for orthodontists. With the advent of temporary anchorage devices, patients who previously had an indication of orthognathic surgery may be favored with counter-clockwise rotation of the mandible, resulting from vertical control of the posterior teeth. Also, cases with increased incisors display at rest may benefit from these biomechanics in the anterior segment. Methodology and resources:This case report illustrates a successful treatment of a patient with hyperdivergent skeletal Class II malocclusion with an unaesthetic smile involving excessive gingival display at smile and absence of passive lip seal. Results: This way, a suitable functional and aesthetic result was obtained with the correction of the increased gingival exposure, passive lip sealing and improved angulation of the mandibular plane.In addition to the conventional cephalometric superimposition, three-dimensional superimposition was performed and evaluated to validate the treatment outcome.Discussion: Although it does not replace orthognathic surgery, such a modality of treatment may benefit patients who are not willing to undergo a more invasive procedure.

Surface wear and adhesive failure of resin attachments used in clear aligner orthodontic treatment.

This study evaluated adhesive and cohesive failures and the surface wear of attachments employed in clear aligner treatment (CAT) using three-dimensional (3D) superimposition. In all, 3D models of 150teeth were obtained from intraoral scans from patients undergoing CAT with at least 4months between each scan. Of the initial sample, 25teeth were discarded, and 125teeth were included in the study. Superimpositions of each individual tooth at the first and second time points were made using computer-aided design (CAD) software (Meshmixer; Autodesk, Mill Valley, CA, USA). Analyses were performed to compare surface wear and failures related to type of attachment (optimized/conventional), dental group (molars/premolars/anterior teeth), and arch (mandibular/maxillary). Mann-Whitney and Kruskal-Wallis statistical tests were applied with significance set at 5%. More surface wear was observed in conventional attachments, mandibular and anterior teeth with statistical significance for surface wear on the distal surface of conventional attachments (p < 0.05). Cohesive failure was observed in 10% of attachments, occurring most frequently on optimized attachments and molar teeth. Adhesive failure was observed in 10% of the samples, more frequently on conventional attachments and posterior teeth. Attachment type (conventional vs. optimized) was significantly correlated with surface wear on the distal surface of the attachment. Arch (mandibular or maxillary) and group of teeth (anterior or posterior) showed no correlation with surface wear. Failure, both adhesive and cohesive, correlated with attachment type and group of teeth, but not with the arch in which they were located.

Three-dimensional (3D) quantitative evaluation of the morphological changes of the upper anterior alveolar bone after retraction of a maxillary incisor

BackgroundThe purpose of this study was to assess morphological changes of the upper anterior alveolus after retraction of a maxillary incisor by applying three-dimensional (3D) superimposition of pretreatment (T1) and posttreatment (T2) cone-beam computed tomography (CBCT) data.MethodsThe study group was comprised of 28 patients with skeletal Class II malocclusion who underwent incisor retraction. CBCT data were acquired before (T1) and after (T2) orthodontic treatment. Labial and palatal alveolar thickness were assessed at the crestal, midroot and apical levels of the retracted incisors. Following three-dimensional (3D) cranial base superimposition, we performed surface modeling and inner remodeling of the labial and palatal alveolar cortex of the maxillary incisors. Paired t-tests were used to compare T0 and T1 bone thickness and volume measurements. Comparisons between labial and palatal surface modeling, inner remodeling and outer surface modeling were performed with paired t-tests in SPSS 20.0 version.ResultsWe observed controlled tipping retraction of the upper incisor. After treatment, the alveolar thickness on the labial sides increased and the palatal alveolar thickness decreased. The labial cortex showed a wider range of modeling area with a larger bending height and a smaller bending angle than the palatal side. The extent of inner remodeling was more prominent than the outer surface on both the labial and palatal sides.ConclusionsAdaptive alveolar surface modeling occurred in response to incisor tipping retraction on both the lingual and labial sides although these changes occurred in an uncoordinated manner. Tipping retraction of the maxillary incisors led to a reduction in alveolar volume.

Using a Three-Dimensional Superimposition Technique, Studying the Effects of Different Cooling Procedures on the Adaptability of Rapidly Heat-Cured Acrylic Denture Bases

Using a Three-Dimensional Superimposition Technique, Studying the Effects of Different Cooling Procedures on the Adaptability of Rapidly Heat-Cured Acrylic Denture Bases

Mandibular transverse dentoalveolar and skeletal changes associated with lip bumper and rapid maxillary expander: A cone-beam computed tomography study

Currently, there is little consensus regarding the spontaneous uprighting of the mandibular dentoalveolar complex in response to maxillary expansion, which poses the question about the necessity of combining mandibular treatment with rapid maxillary expansion to coordinate the maxilla and mandible transversely. This study aimed to evaluate the effects of the bonded rapid maxillary expander (RME) alone compared with RME with lip bumper (LB) treatment on the mandibular transverse changes. This retrospective study analyzed 3 groups: the control group with no orthodontic or orthopedic treatment (23 patients [14 females, 9 males]; mean age 9.13 years at T1 and 11.24 years at T2); the RME group with no mandibular treatment (22 patients [9 females, 13 males]; mean age 8.73 years at T1 and 12.04 years at T2); and RME+ LB group (23 patients [16 females, 7 males]; mean age 9.45 years at T1 and 12.18 years at T2). Three-dimensional superimposition of the mandibular images was performed with cone-beam computed tomography taken at prephase and postphase I treatment (growth and development check records for the control group) to conduct the angular and linear measurements at the dental, alveolar, and skeletal levels. The intergroup comparisons were performed using the Mann-Whitney U-test. Accompanying slight molar self-uprighting during the normal mandibular growth period observed in the control group, transverse growth was also observed in both alveolar and basal bone levels of the mandible, but no significant changes in the alveolar bone inclination occurred. The bonded RME slightly increased the mandibular first molar uprighting but not the mandibular widths at the tooth or alveolar levels. Adding a LB significantly increased the intermolar width and molar uprighting while decreasing the alveolar bone inclination but did not increase the amount of mandibular transverse growth at the bone level. RME alone did not significantly increase the transverse dimension of the mandible. RME+ LB significantly increased mandibular intermolar width, uprighted the mandibular molars, and reduced the alveolar bone inclination.

Exploring the mylohyoid area as a reference for three-dimensional digital mandibular superimposition

Introductionthe quantification of tooth movements should be obtained at different specific times and compared at different stages for every orthodontic treatment. These movements are generally measured on teleradiographs or casts. The use of Cone Beam Computed tomography (CBCT) for maxillary superimposition is clearly established in the literature, but not well defined for mandibular superimposition. This study aims to explore and evaluate the accuracy of the mylo-hyoid area as a reference for mandibular Digital Dental Cast (DDC) three-dimensional (3D) superimposition. Materials and methodsthe study compared mandibular 3D overlays with profile teleradiographs in 30 patients followed at Nice Saint Roch University Hospital. The molar and incisor coordinates on the 3D superimposition based on the mylo-hyoid area were compared to the ones on the 2D lateral cephalogram. Differences between the two methods of superimposition were assessed using paired t-tests. ResultsNo statistically significant difference was observed between the lateral cephalogram-based and mandibular DDC superimposition methods in 3D sagittal and vertical displacements of the lower first molars and central incisors. ConclusionThe study showed the mylo-hyoid area to be an accurate superimposition landmark for the 3D evaluation of mandibular orthodontic tooth displacement. This method is also applicable for patients with conventional orthodontic treatment records. Other studies should be conducted on larger populations, subgroups (malocclusions, therapeutics) and on the use of an intra-oral camera.

Comparison of short-term condylar positional changes in mandibular prognathism after surgery-first approach: Symmetric setback versus asymmetric setback

The aim of this study was to compare how the displacement of the mandibular condyle changed after symmetric or asymmetric mandibular setback surgery using the surgery-first approach (SFA). Patients who underwent mandibular setback surgery using the SFA were selected and divided into a symmetry group (n = 18) with differences of less than 2 mm between the right and left setback, and an asymmetry group (n = 18) with a difference of greater than 2 mm. Cone-beam computed tomography (CBCT)-generated cephalograms were obtained after three-dimensional superimposition of CBCT images taken before surgery (T0), within one week after surgery (T1), and seven months after surgery (T2). The condylar positions were measured. Condylar positional changes according to time were compared between the two groups and correlation analysis was performed. There were significant positional changes in mandibular condyles over time in both groups. However, most of these changes returned to their initial state. In the asymmetry group, there was a greater internal rotation of the mandibular condyle on the lesser setback side. The correlation analysis results revealed that only the setback difference was associated with rotational displacement of the condyle on the lesser setback side at two time points (T1-T0, T2-T0). In the SFA, significant condylar displacement occurred immediately after both symmetric and asymmetric mandibular setback surgery, and the right/left difference in mandibular setback showed a significant positive correlation with rotational displacement. Although more significant rotational displacement of the mandibular condyle was observed after asymmetric mandibular setback surgery, the amount was not large enough to be clinically significant.

Reliability of Anterior Nasal Spine as a Reference Point After LeFort I Surgery Using Three-Dimensional Analysis.

To evaluate the stability of maxilla following orthognathic surgery, it is necessary to consider the positional change of various landmarks according to bone remodeling of the maxilla. This study aimed to evaluate the stability of the anterior nasal spine (ANS) as a reliable landmark after orthognathic surgery. Forty-seven patients with skeletal class III malocclusion who underwent bimaxillary orthognathic surgery were included. Skeletal changes were measured using cone-beam computerized tomography at 3 time points: preoperative (T0), 1-month postoperative (T1), and 12-month postoperative (T2). Linear changes of the 6 landmark points of the maxilla were measured in 3 directions: anteroposterior, vertical, and transverse. The data were analyzed with paired t tests, independent t tests, and multiple regression analysis. At 12-month postoperatively, the ANS showed mean (standard deviation) 1.23 (1.07) mm posterior movement ( P = 0.00), while other landmarks did not show positional changes, implying bony resorption of ANS. Multiple regression test showed surgical forward movements of ANS (T1-0) affect the postoperative backward changes (β = -0.05, P < 0.05). There was a negative correlation between the surgical movement and postoperative change of ANS by Pearson correlation test ( r = -0.38, P < 0.05). The ANS is not a reliable measurement point in three-dimensional superimposition after orthognathic surgery. Therefore, in studying the stability and positional change pattern after LeFort I surgery, it is not recommended to use ANS as a reference point, as changes can occur in the measurement point itself.

Evaluation of the stability of the palatal rugae using the three-dimensional superimposition technique following orthodontic treatment

ObjectivesTo determine the uniqueness and stability of the palatal rugae after orthodontic treatment. MethodsCast models of untreated subjects (n = 50) were obtained twice at intervals of 8–30 months. Cast models of patients who received non-extraction (n = 50) and extraction (n = 50) orthodontic treatment were obtained before and after treatment at intervals of 11–41 months and 14–49 months, respectively. All 300 cast models were scanned digitally. The palatal rugae were manually extracted and transformed into 3D point clouds using reverse engineering software. An iterative closest point (ICP) registration algorithm based on correntropy was applied, and the minimum point-to-point root mean square (RMS) distances were calculated to analyze the deviation of palatal rugae for scans of the same subject (intrasubject deviation [ISD]) and between different subjects (between-subject deviation [BSD]). Differences in ISD between each group and the deviation between ISD and BSD of all 150 subjects were evaluated. ResultsSignificant differences were found in the 150 ISD and 1225 BSD in each group, as well as the 150 ISD and 11,175 BSD across all groups. The mean values of ISD in untreated, non-extraction and extraction group were 0.178, 0.229 and 0.333 mm, respectively. When the first ruga was excluded in the extraction group, the mean ISD decreased to 0.241 mm, which was not significantly different from that in the non-extraction group (p = 0.314). ConclusionsOrthodontic treatment can influence the palatal rugae, especially in cases of extraction. Furthermore, variation mainly existed in the first ruga in cases of extraction. However, palatal rugae are still unique and may be used as a supplementary tool for individual identification. Clinical significanceThis study indicates that palatal rugae might be applied in the evaluation of orthodontic tooth movement and forensic individual identification. The registration algorithm based on correntropy provides a reliable, precise, and convenient method for palatal rugae superimposition.

MeCOM: A Method for Comparing Three-Dimensional Metalloenzyme Active Sites.

Since metalloenzymes are a large collection of metal ion(s) dependent enzymes, comparison analyses of metalloenzyme active sites are critical for metalloenzyme de novo design, function investigation, and inhibitor development. Here, we report a method named MeCOM for comparing metalloenzyme active sites. It is characterized by metal ion(s) centric active site recognition and three-dimensional superimposition using α-carbon or pharmacophore features. The test results revealed that for the given metalloenzymes, MeCOM could effectively recognize the active sites, extract active site features, and superimpose the active sites; it also could correctly identify similar active sites, differentiate dissimilar active sites, and evaluate the similarity degree. Moreover, MeCOM showed potential to establish new associations between structurally distinct metalloenzymes by active site comparison. MeCOM is freely available at https://mecom.ddtmlab.org.

Surgically assisted rapid palatal expansion (SARPE): three-dimensional superimposition on cranial base.

To evaluate dental and skeletal changes caused by surgically assisted rapid palatal expansion (SARPE) using the superimposition of three-dimensional cone-beam computed tomography (CBCT) images on the cranial base. This is a retrospective quasi-experiment before-and-after study using a convenience sample. Twenty-four adult patients (13 male and 11 female) were evaluated before SARPE (T0), immediately after expansion (T1), and after 6months of retention (T2). CBCT scans were superimposed on the anterior cranial base using voxel-based registration. Measurements from different reference points were used for comparisons between times. At T1, all teeth had significant buccal tipping. At T2, most teeth remained in the same position as at T1, except the first premolar and the first molar, whose buccal roots moved slightly. The amount of bony expansion was 65 to 70% of the amount of tooth movement. The A point and maxillary incisors moved anteriorly from T0 to T1 and T2 (p < 0.0001). Inter-nasal distance had increased significantly at T1 (p < 0.0001) and remained stable at T2 (p = 0.478). No expansion was achieved at the zygomatic arch (p = 0.114). SARPE promoted substantial buccal tipping of posterior teeth and some bone displacement; it also moved the maxilla and teeth forward and increased nasal width. No other clinical studies have evaluated dental and skeletal changes caused by SARPE using superimposition of 3D CBCT images on the cranial base. This study findings may help clinical dentists plan treatments using safe and reliable information.

Evaluation of the marginal and internal gaps of partially crystallized versus fully crystallized zirconia-reinforced lithium silicate CAD-CAM crowns: An in vitro comparison of the silicone replica technique, direct view, and 3-dimensional superimposition analysis

Statement of problemThe crystallization process of lithium disilicate crowns has been reported to cause dimensional change, but whether the fit of chairside computer-aided design and computer-aided manufactured (CAD-CAM) zirconia-reinforced lithium silicate crowns is affected is unclear. PurposeThe purpose of this in vitro study was to evaluate with a 3-dimensional superimposition analysis technique the marginal and internal adaptation of fully crystallized versus partially crystallized zirconia-reinforced lithium silicate ceramic CAD-CAM fabricated crowns. Additionally, the silicone replica technique and direct viewing of marginal gap values were compared with the 3-dimensional superimposition analysis technique. Material and methodsThe marginal and internal adaptation of a fully crystallized zirconia-reinforced lithium silicate (CELTRA DUO) were compared with those of a partially crystallized zirconia-reinforced lithium silicate (VITA SUPRINITY) after crystallization. Sixteen crowns (n=8) were fabricated with a chairside CAD-CAM system. The crowns and die and crown assembly were scanned with an optical scanner for the 3-dimensional superimposition analysis. Four hundred sixty-eight measurements were made for each crown, 78 in each 2-dimensional section. Marginal discrepancy was measured by using the direct viewing technique. The internal adaptation of the shoulder area, axial space, and occlusal space was measured by using the silicone replica technique. Both gap values were compared with the 3-dimensional superimposition analysis results by using the independent t test. The 2-way ANOVA was used to detect the effect of each variable (group and site) (α=.05). ResultsThe VITA SUPRINITY crowns showed statistically higher marginal discrepancy values than the CELTRA DUO crowns in both 3-dimensional superimposition analysis and the direct viewing method, and the lingual aspect recorded the highest marginal discrepancy mean value when compared with other aspects. The 3-dimensional superimposition analysis and the direct viewing method were statistically similar (P=.076). The VITA SUPRINTY crowns showed higher internal gap mean values than the CELTRA DUO crowns in both 3-dimensional superimposition analysis and silicone replica techniques. The occlusal space recorded the highest mean value in both groups. Assessment by 3-dimensional superimposition analysis and silicone replica techniques showed statistical difference in internal gap values (P=.04). ConclusionsCELTRA DUO showed better precision fit values than VITA SUPRINITY. Three-dimensional superimposition analysis is a reliable method of evaluating marginal and internal adaptation.

A long-term longitudinal study of the osteoarthritic changes to the temporomandibular joint evaluated using a novel three-dimensional superimposition method

The aim of this study was to assess the changes in individual condyles from 5 to 8 years in patients with temporomandibular joint (TMJ) osteoarthritis using 3-dimensional cone beam computed tomography (3D CBCT) reconstruction and superimposition. To assess the longitudinal TMJ changes, CBCT was performed at initial (T0) and final (T2) timepoints that were at least 5 years apart and at a middle (T1) timepoint. To improve the accuracy, we used a novel superimposition method that designated areas of coronoid process and mandibular body. The differences in the resorption and apposition amounts were calculated between each model via maximum surface distances. The greatest resorption and apposition observed were − 7.48 and 2.66 mm, respectively. Evaluation of the changes in each condyle showed that osteoarthritis leads to both resorption and apposition. Resorption was mainly observed in the superior region, while high apposition rates were observed (in decreasing order) in the posterior, lateral, and anterior regions. The medial parts showed greater apposition than the lateral parts in all regions. Our superimposition method reveals that both resorption and apposition were observed in condyles with TMJ osteoarthritis, and resorption/apposition patterns depend on the individual condyle and its sites.

Variation between natural head orientation and Frankfort horizontal planes in orthognathic surgery patients: 187 consecutive cases

The purpose of this study was to assess the relationship between the Frankfort horizontal (FH) and natural head orientation (NHO), their correlation between patients’ malocclusion, and the impact of counterclockwise rotation (CCW) on the FH-NHO angle variation after orthognathic surgery. An evaluation of 187 consecutive patients was performed at the Maxillofacial Institute (Teknon Medical Center, Barcelona). FH-NHO° was measured pre- and postoperatively at 1 and 12 months, after three-dimensional (3D) superimposition using a software (Dolphin®). Patients were classified as follows: 3.2%, 48.7% and 48.1%, class I, II and III, respectively. Baseline FH-NHO° was significantly positive for patients with dentofacial deformities (2.73°±4.19 (2.12–3.33°, P<0.001). The impact of orthognathic surgery in FH-NHO° was greater in class II when compared with class III patients, with a variation of 2.04°±4.79 (P<0.001) and −1.20°±3.03 (P<0.001), respectively. FH-NHO° increased when CCW rotational movements were performed (P=0.006). The results of this study suggest that pre- and postoperative NHO differs from FH in orthognathic patients. The angle between FH and NHO is significantly larger in class III than in class II patients at baseline, which converges after orthognathic surgery when CCW rotation is performed. Therefore, NHO should be used as the real horizontal plane when planning for orthognathic surgery.

Comparison of cooling methods on denture base adaptation of rapid heat-cured acrylic using a three-dimensional superimposition technique.

Aim:To investigate the effect of different cooling methods on denture base adaptation of rapid heat-cured acrylic resin using 3D superimposition technique.Setting and Design:In vitro - Comparative study.Materials and Methods:Denture base adaptation of two different rapid heat-cured polymethyl methacrylate acrylic resins using five different cooling methods were compared. Forty maxillary edentulous stone cast were prepared to produce the denture bases with standardized thickness. The specimens were divided into five groups (n = 8) according to type of materials and cooling methods. The master stone cast and all forty denture bases were scanned with 3Shape E1 laboratory scanner. The scanned images of each of the denture bases were superimposed over the scanned image of the master cast using Materialize 3-matic software. Three dimensional differences between the two surfaces were calculated and color surface maps were generated for visual qualitative assessment.Statistical Analysis Used:Generalized Linear Model Test, Bonferroni Post Hoc Analysis.Results:All bench-cooled specimens showed wide green-colored area in the overall palatal surface, while the rapid cooled specimens presented with increased red color areas especially at the palate and post dam area. Generalized Linear Model test followed by Bonferroni post hoc analysis showed significant difference in the root mean square values among the specimen groups.Conclusion:Samples that were bench cooled, demonstrated better overall accuracy compared to the rapid cooling groups. Regardless of need for shorter denture processing time, bench cooling of rapid heat-cured PMMA is essential for acceptable denture base adaptation.

3D Method for Occlusal Tooth Wear Assessment in Presence of Substantial Changes on Other Tooth Surfaces.

Early diagnosis and timely management of tooth or dental material wear is imperative to avoid extensive restorations. Previous studies suggested different methods for tooth wear assessment, but no study has developed a three-dimensional (3D) superimposition technique applicable in cases where tooth surfaces, other than the occlusal, undergo extensive morphological changes. Here, we manually grinded plaster incisors and canines to simulate occlusal tooth wear of varying severity in teeth that received a wire retainer bonded on their lingual surfaces, during the assessment period. The corresponding dental casts were scanned using a surface scanner. The modified tooth crowns were best-fit approximated to the original crowns using seven 3D superimposition techniques (two reference areas with varying settings) and the gold standard technique (GS: intact adjacent teeth and alveolar processes as superimposition reference), which provided the true value. Only a specific technique (complete crown with 20% estimated overlap of meshes), which is applicable in actual clinical data, showed perfect agreement with the GS technique in all cases (median difference: −0.002, max absolute difference: 0.178 mm3). The outcomes of the suggested and the GS technique were highly reproducible (max difference < 0.040 mm3). The presented technique offers low cost, convenient, accurate, and risk-free tooth wear assessment.

Three-dimensional superimposition of digital models for individual identification

Dentition is an individualizing structure in humans that may be potentially utilized in individual identification. However, research on the use of three-dimensional (3D) digital models for personal identification is rare. This study aimed to develop a method for individual identification based on a 3D image registration algorithm and assess its feasibility in practice. Twenty-eight college students were recruited; for each subject, a dental cast and an intraoral scan were taken at different time points, and digital models were acquired. The digital models of the dental casts and intraoral scans were assumed as antemortem and postmortem dentition, respectively. Additional 72 dental casts were extracted from a hospital database as a suspect pool together with 28 antemortem models. The dentition images of all of the models were extracted. Correntropy was introduced into the traditional iterative closest point algorithm to compare each postmortem 3D dentition with 3D dentitions in the suspect pool. Point-to-point root mean square (RMS) distances were calculated, and then 28 matches and 2772 mismatches were obtained. Statistical analysis was performed using the Mann-Whitney U test, which showed significant differences in RMS between matches (0.18±0.03mm) and mismatches (1.04±0.67mm) (P<0.05). All of the RMS values of the matched models were below 0.27mm. The percentage of accurate identification reached 100% in the present study. These results indicate that this method for individual identification based on 3D superimposition of digital models is effective in personal identification.