Three-dimensional Microfluidic System Research Articles

Deciphering hepatoma cell resistance to tyrosine kinase inhibitors: insights from a Liver-on-a-Chip model unveiling tumor endothelial cell mechanisms.

Liver cancer represents a significant global burden in terms of cancer-related mortality, with resistance to anti-angiogenic drugs such as Sorafenib and Lenvatinib presenting a formidable challenge. Tumor angiogenesis, characterized by the formation of new blood vessels within tumors, plays a pivotal role in cancer progression and metastasis. Tumor endothelial cells, specialized endothelial cells lining tumor blood vessels, exhibit unique phenotypic and functional traits that drive aberrant vessel formation and contribute to therapy resistance. CD105, a cell-surface glycoprotein that is highly expressed on endothelial cells during angiogenesis, including tumor endothelial cells, regulates endothelial cell proliferation, migration, and vessel formation by modulating transforming growth factor-beta (TGF-β) signaling pathways. Elevated CD105 expression on tumor endothelial cells correlates with increased angiogenic activity and poor prognosis in cancer patients. Targeting CD105 with antibodies presents a promising strategy to inhibit tumor angiogenesis and disrupt tumor vasculature, offering potential therapeutic benefits by interfering with the tumor microenvironment and inhibiting its progression. This study investigates tumor angiogenesis through a three-dimensional (3D) microfluidic co-culture system incorporating endothelial cells and hepatocellular carcinoma (HCC) cells. The primary focus is on the role of CD105 expression within the liver tumor microenvironment and its contribution to increased chemoresistance. Additionally, this research examines the influence of CD105 expression on the efficacy of tyrosine kinase inhibitors (TKIs) and its pivotal function in facilitating angiogenesis in liver tumors. The proposed microfluidic chip model investigates liver cancer cell interactions within a microfluidic chip model designed to simulate aspects of liver tumor angiogenesis.

Treponema pallidum protein Tp0136 promotes angiogenesis to facilitate the dissemination of Treponema pallidum

ABSTRACT The incompletely eliminated Treponema pallidum (T. pallidum) during primary syphilis chancre infection can result in the progression of secondary, tertiary, or latent syphilis in individuals, suggesting that T. pallidum has successfully evaded the immune response and spread to distant sites. The mechanism underlying the dissemination of T. pallidum is unclear. Here, a syphilitic rabbit model dorsal-injected with recombinant Tp0136 protein or Tp0136 antibody subcutaneously was used to demonstrate the role of Tp0136 protein in promoting the dissemination of T. pallidum to the testis and angiogenesis in vivo; vascular endothelial cell line HMEC-1 was employed to display that Tp0136 protein enhances the angiogenesis. Furthermore, the three-dimensional microfluidic angiogenesis system showed that the angiogenesis would heighten vascular permeability. Then transcriptome sequencing analysis, in conjunction with cell-level validation, elucidated the critical role of the PI3K-AKT signaling pathway in the promotion of angiogenesis by Tp0136 protein, resulting in heightened permeability. These findings elucidate the strategy employed by T. pallidum in evading immune clearance.

Fabrication of a Three-Dimensional Microfluidic System from Poly(methyl methacrylate) (PMMA) Using an Intermiscibility Vacuum Bonding Technique.

In this study, the fabrication of microfluidic chips through the bonding of poly (methyl methacrylate) (PMMA) boards featuring designed patterns to create a three-dimensional sandwich structure with embedded microchannels was explored. A key focus was optimization of the interface quality of bonded PMMA pairs by adjusting the solvent, such as such as acetone, alcohol, and their mixture. Annealing was conducted below 50 °C to leverage the advantages of low-temperature bonding. Because of the differences in the chemical reactivity of PMMA toward acetone, alcohol, and their combinations, the resulting defect densities at the bonding interfaces differed significantly under low-temperature annealing conditions. To achieve the optimal sealing integrity, bonding pressures of 30 N, 40 N, and 50 N were evaluated. The interface was analyzed through microstructural examination via optical microscopy and stress measurements were determined using digital photoelasticity, while the bonding strength was assessed through tensile testing.

Hyaluronic acid turnover controls the severity of cerebral cavernous malformations in bioengineered human micro-vessels.

Cerebral cavernous malformations (CCMs) are vascular lesions that predominantly form in blood vessels of the central nervous system upon loss of the CCM multimeric protein complex. The endothelial cells within CCM lesions are characterized by overactive MEKK3 kinase and KLF2/4 transcription factor signaling, leading to pathological changes such as increased endothelial cell spreading and reduced junctional integrity. Concomitant to aberrant endothelial cell signaling, non-autonomous signals from the extracellular matrix (ECM) have also been implicated in CCM lesion growth and these factors might explain why CCM lesions mainly develop in the central nervous system. Here, we adapted a three-dimensional microfluidic system to examine CCM1 deficient human micro-vessels in distinctive extracellular matrices. We validate that pathological hallmarks are maintained in this model. We further show that key genes responsible for homeostasis of hyaluronic acid, a major extracellular matrix component of the central nervous system, are dysregulated in CCM. Supplementing the matrix in our model with distinct forms of hyaluronic acid inhibits pathological cell spreading and rescues barrier function. Hyaluronic acid acts by dampening cell-matrix adhesion signaling in CCM, either downstream or in parallel of KLF2/4. This study provides a proof-of-principle that ECM embedded 3D microfluidic models are ideally suited to identify how changes in ECM structure and signaling impact vascular malformations.

Patient-derived exosomes facilitate therapeutic targeting of oncogenic MET in advanced gastric cancer.

Gastric cancer (GC) with peritoneal metastases and malignant ascites continues to have poor prognosis. Exosomes mediate intercellular communication during cancer progression and promote therapeutic resistance. Here, we report the significance of exosomes derived from malignant ascites (EXOAscites) in cancer progression and use modified exosomes as resources for cancer therapy. EXOAscites from patients with GC stimulated invasiveness and angiogenesis in an ex vivo three-dimensional autologous tumor spheroid microfluidic system. EXOAscites concentration increased invasiveness, and blockade of their secretion suppressed tumor progression. In MET-amplified GC, EXOAscites contain abundant MET; their selective delivery to tumor cells enhanced angiogenesis and invasiveness. Exosomal MET depletion substantially reduced invasiveness; an additive therapeutic effect was induced when combined with MET and/or VEGFR2 inhibition in a patient-derived MET-amplified GC model. Allogeneic MET-harboring exosome delivery induced invasion and angiogenesis in a MET non-amplified GC model. MET-amplified patient tissues showed higher exosome concentration than their adjacent normal tissues. Manipulating exosome content and production may be a promising complementary strategy against GC.

Magnetic force-based cell manipulation for in vitro tissue engineering.

Cell manipulation techniques such as those based on three-dimensional (3D) bioprinting and microfluidic systems have recently been developed to reconstruct complex 3D tissue structures in vitro. Compared to these technologies, magnetic force-based cell manipulation is a simpler, scaffold- and label-free method that minimally affects cell viability and can rapidly manipulate cells into 3D tissue constructs. As such, there is increasing interest in leveraging this technology for cell assembly in tissue engineering. Cell manipulation using magnetic forces primarily involves two key approaches. The first method, positive magnetophoresis, uses magnetic nanoparticles (MNPs) which are either attached to the cell surface or integrated within the cell. These MNPs enable the deliberate positioning of cells into designated configurations when an external magnetic field is applied. The second method, known as negative magnetophoresis, manipulates diamagnetic entities, such as cells, in a paramagnetic environment using an external magnetic field. Unlike the first method, this technique does not require the use of MNPs for cell manipulation. Instead, it leverages the magnetic field and the motion of paramagnetic agents like paramagnetic salts (Gadobutrol, MnCl2, etc.) to propel cells toward the field minimum, resulting in the assembly of cells into the desired geometrical arrangement. In this Review, we will first describe the major approaches used to assemble cells in vitro-3D bioprinting and microfluidics-based platforms-and then discuss the use of magnetic forces for cell manipulation. Finally, we will highlight recent research in which these magnetic force-based approaches have been applied and outline challenges to mature this technology for in vitro tissue engineering.

A three-dimensional microfluidic flow cell and system integration for improved electrochemical substrate detection in HRP/TMB-based immunoassays

This system built from commercially available parts and microfluidics allows for efficient and robust readout of HRP/TMB based immunoassays.

Quantitative Analysis of the Volume Difference of Microdroplets in Vertical Contact Control

We can control the concentration of chemicals in microdroplets by using vertical contact control of droplets. When a microdroplet contacts an opposite microdroplet, chemicals diffuse between the droplets. Then, the coalescent droplet is separated into two microdroplets. Contact control is attractive for use in biochemical applications because it realizes three-dimensional microfluidic systems. However, in vertical contact control, gravity causes a volume difference of the microdroplets, \ensuremath{\Delta}V, after separation. To solve the problem of gravity, we analyze \ensuremath{\Delta}V quantitatively. In experiments, we measure the relationship between \ensuremath{\Delta}V and the size of microdroplets, R. As a result, we find that \ensuremath{\Delta}V increases proportionally to ${R}^{5}$, which agrees with a simple theoretical model based on the balance between gravity and surface tension. Our model suggests that \ensuremath{\Delta}V of the microdroplets after vertical contact control can be predicted quantitatively with the material parameters of the density and surface tension of the liquid.

Matrix Pore Size Governs Escape of Human Breast Cancer Cells from a Microtumor to an Empty Cavity.

SummaryHow the extracellular matrix (ECM) affects the progression of a localized tumor to invasion of the ECM and eventually to vascular dissemination remains unclear. Although many studies have examined the role of the ECM in early stages of tumor progression, few have considered the subsequent stages that culminate in intravasation. In the current study, we have developed a three-dimensional (3D) microfluidic culture system that captures the entire process of invasion from an engineered human micro-tumor of MDA-MB-231 breast cancer cells through a type I collagen matrix and escape into a lymphatic-like cavity. By varying the physical properties of the collagen, we have found that MDA-MB-231 tumor cells invade and escape faster in lower-density ECM. These effects are mediated by the ECM pore size, rather than by the elastic modulus or interstitial flow speed. Our results underscore the importance of ECM structure in the vascular escape of human breast cancer cells.

A closer look at the genotoxicity of graphene based materials

Graphene-based materials (GBMs) have attracted many scientists because of their optical, thermal, mechanical and electronic properties. Their good dispersibility in different type of solvents including water, the possibility to formulate them according to desired function, and the wide surface area, which can allow various chemical modifications, expanded the use of these materials in biological systems. For these reasons, GBMs have been extensively studied in vitro and in vivo in the biomedical field. However, the toxicity and genotoxicity of GBMs must be thoroughly investigated before they can be translated into clinical settings. The main mechanism of graphene toxicity is thought to be caused by reactive oxygen species produced in cells, which in turn interact with various biomolecules including DNA. In this review we aimed to discuss different genotoxicity studies performed with GBMs with specific focus on the different cell types and conditions. By comparing and discussing such reports, scientists will be able to engineer non toxic GBMs for future preclinical and/or clinical studies. In order to allow a safer and faster transition to clinic, future studies should involve state-of-the-art technologies such as systems biology approaches or three-dimensional microfluidic systems, which can better predict the normal physiological scenario.

Polarization-insensitive space-selective etching in fused silica induced by picosecond laser irradiation

It is well known that when the fused silica is irradiated with focused femtosecond laser beams, space selective chemical etching can be achieved. The etching rate depends sensitively on the polarization of the laser. Surprisingly, we observe that by chirping the Fourier-transform-limited femtosecond laser pulses to picosecond pulses, the polarization dependence of the etching rate disappears, whereas an efficient etching rate can still be maintained. Observation with a scanning electron microscope reveals that the chirped pulses can induce interconnected nanocracks in the irradiated areas which facilitates efficient introduction of the etchant into the microchannel. The reported technology is of great use for fabrication of three-dimensional (3D) microfluidic systems and glass-based 3D printing.

Vortex- and Centrifugation-Free Extraction of HIV-1 RNA.

HIV viral load measurements play a critical role in monitoring disease progression in those who are on antiretroviral treatment. In order to obtain an accurate measurement, rapid sample preparation techniques are required. There is an unmet need for HIV extraction instruments in resource-limited settings, where HIV prevalence is high. Therefore, the objective of our study was to develop a three-dimensional (3D) microfluidic system to extract HIV-1 RNA with minimal electricity and without complex laboratory instruments. A 3D microfluidic system was designed in which magnetic beads bound with nucleic acids move through immiscible oil-water interfaces to separate HIV-1 RNA from the sample. Polymerase chain reaction (PCR) amplification was used to quantify the total amount of HIV-1 RNA extracted as we optimized the system through chip design, bead type, carry-over volume, carrier RNA concentration, and elution buffer temperature. Additionally, the extraction efficiency of the 3D microfluidic system was evaluated by comparing with a Qiagen EZ1 Advanced XL instrument using 20 HIV-1-positive plasma samples. Our method has near-perfect (100%) extraction efficiency in spiked serum samples with as little as 50copies/mL starting sample. Furthermore, we report carry-over volumes of 0.31%±0.006% of total sample volume. Using the EZ1 Advanced XL as a gold standard, the average percentage HIV-1 RNA extracted using the microchip was observed to be 65.4% ± 24.6%. From a clinical perspective, the success of our method opens up its possible use in diagnostic tests for HIV in the remote areas where access to vortexes and centrifuges is not available. Here we present a proof-of-concept device which, with further development, could be used for sample preparation at the point of care.

A dynamic in vivo-like organotypic blood-brain barrier model to probe metastatic brain tumors.

The blood-brain barrier (BBB) restricts the uptake of many neuro-therapeutic molecules, presenting a formidable hurdle to drug development in brain diseases. We proposed a new and dynamic in vivo-like three-dimensional microfluidic system that replicates the key structural, functional and mechanical properties of the blood-brain barrier in vivo. Multiple factors in this system work synergistically to accentuate BBB-specific attributes–permitting the analysis of complex organ-level responses in both normal and pathological microenvironments in brain tumors. The complex BBB microenvironment is reproduced in this system via physical cell-cell interaction, vascular mechanical cues and cell migration. This model possesses the unique capability to examine brain metastasis of human lung, breast and melanoma cells and their therapeutic responses to chemotherapy. The results suggest that the interactions between cancer cells and astrocytes in BBB microenvironment might affect the ability of malignant brain tumors to traverse between brain and vascular compartments. Furthermore, quantification of spatially resolved barrier functions exists within a single assay, providing a versatile and valuable platform for pharmaceutical development, drug testing and neuroscientific research.

Intrinsic FGF2 and FGF5 promotes angiogenesis of human aortic endothelial cells in 3D microfluidic angiogenesis system.

The human body contains different endothelial cell types and differences in their angiogenic potential are poorly understood. We compared the functional angiogenic ability of human aortic endothelial cells (HAECs) and human umbilical vein endothelial cells (HUVECs) using a three-dimensional (3D) microfluidic cell culture system. HAECs and HUVECs exhibited similar cellular characteristics in a 2D culture system; however, in the 3D microfluidic angiogenesis system, HAECs exhibited stronger angiogenic potential than HUVECs. Interestingly, the expression level of fibroblast growth factor (FGF)2 and FGF5 under vascular endothelial growth factor (VEGF)-A stimulation was significantly higher in HAECs than in HUVECs. Moreover, small interfering RNA-mediated knockdown of FGF2 and FGF5 more significantly attenuated vascular sprouting induced from HAECs than HUVECs. Our results suggest that HAECs have greater angiogenic potential through FGF2 and FGF5 upregulation and could be a compatible endothelial cell type to achieve robust angiogenesis.

Engineering of a Biomimetic Pericyte-Covered 3D Microvascular Network.

Pericytes enveloping the endothelium play an important role in the physiology and pathology of microvessels, especially in vessel maturation and stabilization. However, our understanding of fundamental pericyte biology is limited by the lack of a robust in vitro model system that allows researchers to evaluate the interactions among multiple cell types in perfusable blood vessels. The present work describes a microfluidic platform that can be used to investigate interactions between pericytes and endothelial cells (ECs) during the sprouting, growth, and maturation steps of neovessel formation. A mixture of ECs and pericytes was attached to the side of a pre-patterned three dimensional fibrin matrix and allowed to sprout across the matrix. The effects of intact coverage and EC maturation by the pericytes on the perfused EC network were confirmed using a confocal microscope. Compared with EC monoculture conditions, EC-pericyte co-cultured vessels showed a significant reduction in diameter, increased numbers of junctions and branches and decreased permeability. In response to biochemical factors, ECs and pericytes in the platform showed the similar features with previous reports from in vivo experiments, thus reflect various pathophysiological conditions of in vivo microvessels. Taken together, these results support the physiological relevancy of our three-dimensional microfluidic culture system but also that the system can be used to screen drug effect on EC-pericyte biology.

An integrated microfluidic cell culture system for high-throughput perfusion three-dimensional cell culture-based assays: effect of cell culture model on the results of chemosensitivity assays

Although microfluidic cell culture systems are versatile tools for cellular assays, their use has yet to set in motion an evolutionary shift away from conventional cell culture methods. This situation is mainly due to technical hurdles: the operational barriers to the end-users, the lack of compatible detection schemes capable of reading out the results of a microfluidic-based cellular assay, and the lack of fundamental data to bridge the gap between microfluidic and conventional cell culture models. To address these issues, we propose a high-throughput, perfusion, three-dimensional (3-D) microfluidic cell culture system encompassing 30 microbioreactors. This integrated system not only aims to provide a user-friendly cell culture tool for biologists to perform assays but also to enable them to obtain precise data. Its technical features include (i) integration of a heater chip based on transparent indium tin oxide glass, providing stable thermal conditions for cell culturing; (ii) a microscale 3-D culture sample loading scheme that is both efficient and precise; (iii) a non-mechanical pneumatically driven multiplex medium perfusion mechanism; and (iv) a microplate reader-compatible waste medium collector array for the subsequent high throughput bioassays. In this study, we found that the 3-D culture sample loading method provided uniform sample loading [coefficient of variation (CV): 3.2%]. In addition, the multiplex medium perfusion mechanism led to reasonably uniform (CV: 3.6-6.9%) medium pumping rates in the 30 microchannels. Moreover, we used the proposed system to perform a successful cell culture-based chemosensitivity assay. To determine the effects of cell culture models on the cellular proliferation, and the results of chemosensitivity assays, we compared our data with that obtained using three conventional cell culture models. We found that the nature of the cell culture format could lead to different evaluation outcomes. Consequently, when establishing a cell culture model for in vitro cell-based assays, it might be necessary to investigate the fundamental physiological variations of the cultured cells in different culture systems to avoid any misinterpretation of data. As a whole, we have developed an integrated microfluidic cell culture system that overcomes several technical hurdles commonly encountered in the practical application of microfluidic cell culture systems, and we have obtained fundamental information to reconcile differences found with data acquired using conventional methods.

Development of a three-dimensional microfluidic system for long-term tumor spheroid culture

Abstract In this paper, we present a low-cost three-dimensional microfluidic system made of poly(dimethylsiloxane) for tumor spheroid formation and cultivation. Tumor spheroids reaching diameters of up to 300 μm were cultured in perfusion microchambers providing extremely low shear stress. Spheroids were cultured for 15 days and high viability of the cells was observed within this time. The presented microsystem is a prospective solution for development of microfluidic platforms for anticancer drug screening.

Long-term three-dimensional cell culture and anticancer drug activity evaluation in a microfluidic chip

In this work, we present a microfluidic array of microwells for long-term tumor spheroid cultivation and anticancer drug activity evaluation. The three-dimensional microfluidic system was obtained by double casting of poly(dimethylsiloxane). Spheroids of HT-29 human carcinoma cells were cultured in the microsystem for four weeks. After two weeks of the culture growth slowdown and stop were observed and high cell viability was determined within next two weeks. The characteristics of a homeostasis-like state were achieved. A cytostatic drug (5-fluorouracil) was introduced into the microsystem with different frequency (every day or every second day) and different concentrations. The geometry and construction of the microsystem enables flushing away of unaggregated (including dead) cells while viable spheroids remain inside microwells and decreasing spheroid diameter can be observed and measured as an indicator of decreasing cell viability. The results have shown differences in response of spheroids to different concentrations of 5-fluorouracil. It was also observed, that higher frequency of drug dosing resulted in more rapid spheroid diameter decrease. The presented microfluidic system is a solution for cell-based studies in an in vivo-like microfluidic environment. Moreover, observation of decreasing spheroid dimensions is a low-cost, label-free and easy-to-conduct mean of a quantitative determination of a 3D cellular model response to a applied drug. It is suitable for long-term observation of spheroid response, in a contrary to other viability assays requiring termination of a culture.

Rapid prototyping of three-dimensional microfluidic mixers in glass by femtosecond laser direct writing

The creation of complex three-dimensional (3D) microfluidic systems has attracted significant attention from both scientific and applied research communities. However, it is still a formidable challenge to build 3D microfluidic structures with arbitrary configurations using conventional planar lithographic fabrication methods. Here, we demonstrate rapid fabrication of high-aspect-ratio microfluidic channels with various 3D configurations in glass substrates by femtosecond laser direct writing. Based on this approach, we demonstrate a 3D passive microfluidic mixer and characterize its functionalities. This technology will enable rapid construction of complex 3D microfluidic devices for a wide array of lab-on-a-chip applications.

Flexible microfluidic cloth-based analytical devices using a low-cost waxpatterning technique

This paper describes the fabrication of microfluidic cloth-based analytical devices (μCADs) using a simple wax patterning method on cotton cloth for performing colorimetric bioassays. Commercial cotton cloth fabric is proposed as a new inexpensive, lightweight, and flexible platform for fabricating two- (2D) and three-dimensional (3D) microfluidic systems. We demonstrated that the wicking property of the cotton microfluidic channel can be improved by scouring in soda ash (Na(2)CO(3)) solution which will remove the natural surface wax and expose the underlying texture of the cellulose fiber. After this treatment, we fabricated narrow hydrophilic channels with hydrophobic barriers made from patterned wax to define the 2D microfluidic devices. The designed pattern is carved on wax-impregnated paper, and subsequently transferred to attached cotton cloth by heat treatment. To further obtain 3D microfluidic devices having multiple layers of pattern, a single layer of wax patterned cloth can be folded along a predefined folding line and subsequently pressed using mechanical force. All the fabrication steps are simple and low cost since no special equipment is required. Diagnostic application of cloth-based devices is shown by the development of simple devices that wick and distribute microvolumes of simulated body fluids along the hydrophilic channels into reaction zones to react with analytical reagents. Colorimetric detection of bovine serum albumin (BSA) in artificial urine is carried out by direct visual observation of bromophenol blue (BPB) colour change in the reaction zones. Finally, we show the flexibility of the novel microfluidic platform by conducting a similar reaction in a bent pinned μCAD.