Three-dimensional CT Scan Research Articles

3dct Conduit and Oesophageal Metrics, a Valuable Method to Diagnose Post Sleeve Gastrectomy Abnormalities.

Reflux after laparoscopic sleeve gastrectomy (LSG) may result from anatomical and functional anomalies in the gastric conduit. Three-dimensional CT scans (3DCT) offer a comprehensive view of gastric anatomy. This study aims to establish specific measurements associated with sleeve abnormalities to standardise the reporting of 3DCT which may help in management of LSG complications. This retrospective study analysed 64 post-LSG patients who underwent gastric 3DCT. Data included clinical demographics, pre-LSG BMI, BMI at 3DCT, and the duration between surgery and examination. Symptomatology prompts the scan and other concurrent investigations. Various 3DCT measurements were taken, including angularis angle (AA), surface area (ASA), conduit length (CL), proximal maximal surface area (PMSA), and distal maximal surface area (DMSA) of the gastric conduit. Patients were categorised based on endoscopy findings and symptomatology. Outcomes post-revisional surgery were assessed and analysed. 20.3% were male. Pre-LSG BMI and BMI at 3DCT were 45.57 (± 8.3) and 36.3 (± 8.7), respectively. Mean surgery-to-scan period was 6.2years. 71.8% of patients presented with reflux, regurgitation, or dysphagia, whilst the remainder primarily exhibited weight regain. Patients with endoscopic evidence of stenosis/reflux demonstrated significantly lower gastric volume, ASA, and DMSA (p = 0.002 and p = 0.007, respectively). Oesophageal diameter above the conduit and an ASA to DMSA ratio ≤ 0.5 were negatively associated with AA (p = 0.008 and p = 0.08, respectively). Patients with improved outcomes after revisional bypass and gastrogastrostomy displayed a negative correlation with ASA and positive correlation with the ASA to PMSA ratio (≤ 0.5). 3DCT measurements have a potential role in defining post-LSG stenosis and predicting outcomes of revisional surgery. Patients with anatomic abnormalities that are shown on CT appear to improve with anatomic correction.

Does mandible ramus height asymmetry affect postoperative skeletal stability in orthognathic surgery patients?

BackgroundRelapses following orthognathic surgery have been reported to exceed 2% to 50%, depending on multiple factors. This study aimed to analyze the stability after orthognathic surgery in patients with mandibular ramus height asymmetry through 3D reconstruction using Cone-beam CT.MethodsThis retrospective cohort study investigated patients who underwent mandibular setback surgery using bilateral sagittal split ramus osteotomy. Three-dimensional CT scans were taken at three different time points. Evaluation of the postoperative stability involved measuring changes in the x, y, and z axes as well as roll and yaw rotations of the mandible at specific landmarks (B point, mental foramen) on 3D CT scans obtained immediately after surgery and 6–12 months postoperatively. They were categorized into four groups based on bilateral mandibular height asymmetry through Asymmetry index (AI). The one-way ANOVA was implemented to compare the intergroup differences and Tukey's post hoc test was employed. Additionally, the Pearson correlation coefficient was also calculated.ResultsA total of 24 patients were included in this study. The corresponding AI, representing the degree of asymmetry in both mandibles, were calculated as Group 1 was 1.25 ± 0.64%, Group 2 was 2.89 ± 0.47%, Group 3 was 5.03 ± 0.51%, and Group 4 was 9.40 ± 1.99%. The x-axis change in Group 4 was significantly larger at 1.71 mm compared to Group 1 at 0.64 mm. The mandibular roll, Group 4 showed a statistically significant increase at 1.33° compared to Group 1 at 0.35°. And there was a significant positive correlation observed between x-axis change and AI (p = 0.019), as well as between mandibular roll and AI (p = 0.025).ConclusionAfter orthognathic surgery, stability was influenced by numerous factors, with the findings of this study suggesting that the degree of ramus height asymmetry in the mandible can be considered one contributing factor.

Predicting lung cancer's metastats' locations using bioclinical model

BackgroundLung cancer is a global leading cause of cancer-related deaths, and metastasis profoundly influences treatment outcomes. The limitations of conventional imaging in detecting small metastases highlight the crucial need for advanced diagnostic approaches.MethodsThis study developed a bioclinical model using three-dimensional CT scans to predict the spatial spread of lung cancer metastasis. Utilizing a three-layer biological model, we identified regions with a high probability of metastasis colonization and validated the model on real-world data from 10 patients.FindingsThe validated bioclinical model demonstrated a promising 74% accuracy in predicting metastasis locations, showcasing the potential of integrating biophysical and machine learning models. These findings underscore the significance of a more comprehensive approach to lung cancer diagnosis and treatment.InterpretationThis study's integration of biophysical and machine learning models contributes to advancing lung cancer diagnosis and treatment, providing nuanced insights for informed decision-making.

Intelligent robot-assisted fracture reduction system for the treatment of unstable pelvic fractures

BackgroundPrecise and minimally invasive closed reduction is the premise of minimally invasive internal fixation. This paper aims to explore the safety and efficacy of a robot-assisted fracture reduction system (RAFR) in the treatment of pelvic fractures and to analyze its clinical advantages and existing problems.MethodsThe RAFR system intelligently designed the optimal reduction path and target position based on a preoperative three-dimensional(3D) CT scan of the patient. The reduction robotic arm automatically reduced the affected hemipelvis according to the pre-planned reduction path.ResultsThe average residual displacement was the 6.65 ± 3.59 mm. According to Matta’s criteria, there were 7 excellent, 10 good, and 3 fair, and the excellent and good rate was 85%. No postoperative complications occurred.ConclusionIn our study, the RAFR system could complete accurate and minimally invasive closed reduction for most patients with unstable pelvic fractures, which could achieve good fracture reduction quality and short-term efficacy.

Does adjunctive fixation in conjunction with miniplate affect condylar position and morphology after mandibular advancement through bilateral sagittal split ramus osteotomy? A retrospective 3-dimensional CT comparative study

To minimize condylar positional and morphological changes after mandibular advancement through bilateral sagittal split ramus osteotomy (BSSRO), surgeons add either a bicortical screw or a two-hole plate distal to the conventional single miniplate. Since there have been no previous studies investigating the effect of this combination, our study aimed to evaluate the short- and long-term effects of these adjunctive fixation methods (AFM) on condylar positional and morphological changes after mandibular advancement through BSSRO.This retrospective cohort study included consecutive patients with retruded mandibles who were treated in the Department of Orthognathic and TMJ Surgery at West China Hospital of Stomatology, Sichuan University. The patients were divided into two groups based on the primary predictor variable, which was the addition of AFM — either a single bicortical screw or a two-hole plate in addition to the single miniplate. The primary outcome variable was the condylar positional and morphological changes after mandibular advancement through BSSRO. Three-dimensional facial CT scans were obtained at three different time points (preoperatively — T0, 1 week postoperatively — T1, and 1 year postoperatively — T2) and analyzed using ITK-SNAP, 3D Slicer, and SlicerSALT software. Intergroup comparisons were conducted with an independent t-test, with a p-value of <0.05 considered significant. Correlations between the variables were estimated by Pearson correlation. The study comprised 51 patients (32 females, 19 males; mean age 25.13 ± 4.24 years), involving a total of 81 condyles (21 unilateral and 60 bilateral).There was a significant difference in long-term condylar displacement in favor of AFM along with a single miniplate (p < 0.001). The bicortical screw group recorded less condylar displacement than the two-hole plate group horizontally (0.11 mm vs 0.22 mm) and sagittally (0.03 mm vs 0.17 mm), but more vertically (0.85 mm vs 0.03 mm). Bone formation associated with AFM occurred on all condylar surfaces, compared with only three surfaces in the single miniplate group.The adjunctive method in addition to the single miniplate fixation method showed less condylar displacement and more bone apposition after mandibular advancement through BSSRO. The follow-up duration variable was the only significant determinant for volumetric changes in the condyle.

Efficacy of navigation system-assisted distraction osteogenesis for hemifacial microsomia based on artificial intelligence for 3 to 18 years old: study protocol for a randomized controlled single-blind trial

BackgroundMandibular distraction osteogenesis (MDO) is a major part of the treatment for hemifacial microsomia patients. Due to the narrow surgical field of the intraoral approach, osteotomy accuracy is highly dependent on the surgeons’ experience. Electromagnetic (EM) tracking systems can achieve satisfying accuracy to provide helpful real-time surgical navigation. Our research team developed an EM navigation system based on artificial intelligence, which has been justified in improving the accuracy of osteotomy in the MDO in animal experiments. This study aims to clarify the effect of the EM navigation system in improving the MDO accuracy for hemifacial microsomia patients.MethodsThis study is designed as a single-centered and randomized controlled trial. Altogether, 22 hemifacial microsomia patients are randomly assigned to the experiment and control groups. All patients receive three-dimensional CT scans and preoperative surgical plans. The EM navigation system will be set up for those in the experiment group, and the control group will undergo traditional surgery. The primary outcome is the surgical precision by comparing the osteotomy position of pre- and postoperative CT scan images through the Geomagic Control software. The secondary outcomes include mandibular symmetry (occlusal plane deviation angle, mandibular ramus height, and body length), pain scale, and complications. Other indications, such as the adverse events of the system and the satisfactory score from patients and their families, will be recorded.DiscussionThis small sample randomized controlled trial intends to explore the application of an EM navigation system in MDO for patients, which has been adopted in other surgeries such as orthognathic procedures. Because of the delicate structures of children and the narrow surgical view, accurate osteotomy and protection of nearby tissue from injury are essential for successful treatment. The EM navigation system based on artificial intelligence adopted in this trial is hypothesized to provide precise real-time navigation for surgeons and optimally improve patient outcomes, including function and aesthetic results. The results of this trial will extend the application of new navigation technology in pediatric plastic surgery.Trial registrationChinese Clinical Trial Registry ChiCTR2200061565. Registered on 29 June 2022.

Unilateral Bi/Multi-Portal Endoscopy for the Treatment of Complicated Lumbar Degenerative Diseases with Utilization of Uniaxial Spinal Endoscope, Instead of Arthroscope: Technique Note and Clinical Results.

This article aims to discuss a novel surgical strategy, referred to as unilateral bi/multi-portal endoscopy (UME), which used a uniaxial spinal endoscope instead of an arthroscope in the traditional unilateral biportal endoscopy (UBE) surgical procedure in our study of the treatment of complicated lumbar degenerative diseases. This retrospective study included 42 patients diagnosed with high-migrated lumbar disc herniation and bilateral spinal stenosis who underwent UME surgery from January 2021 to December 2021. Patients included 20 men and 22 women, with an average age of 55.97±14.92 years. The average follow-up period was 13.19 months. The demographic data, operation time (min), and complications were recorded and analyzed. The visual analogue scale (VAS), Oswestry Disability Index (ODI) scores were used to evaluate the surgical outcomes. Three-dimensional CT scans and MRI were conducted to evaluate the radiographic improvement. A total of 26 patients were diagnosed with lumbar disc herniation and 16 with lumbar spinal stenosis. All 42 patients underwent UME surgery and achieved satisfactory outcomes. The operation time was 154.46±46.09 min. The average follow-up time was 13.19±1.33 months. The preoperative back pain (VAS-Back) and the last follow-up VAS-Back were 3.84±1.00 and 0.70±0.46, respectively (P < 0.05). The preoperative leg pain (VAS-Leg) and the last follow-up VAS-Leg were 6.46±1.08 and 1.03±0.64, respectively (P <0.05). Significant differences existed between preoperative ODI scores (58.70±11.22%) and the last follow-up ODI scores (9.24±3.04%; P<0.05). All patients achieved significant pain relief and functional improvement after the surgery. No severe complications occurred, except for two cases of postoperative dysesthesia and one case suffered from vertebral compression fractures induced by a postoperative accidental injury. Symptoms of numbness disappeared within one week with treatment using dexamethasone and neurotrophic drugs. The vertebral fracture case recovered with percutaneous kyphoplasty treatment. This study suggests that UME is a promising treatment strategy for high-migrated disc herniation and bilateral spinal stenosis.

Trigone point as an alternative location for ventricular shunt insertion

Link of Video Abstract: https://youtu.be/BtHvICeUONYBackground: Hydrocephalus is a condition in which cerebrospinal fluid (CSS) buildup in the ventricles is caused by excessive CSS production or disturbance of CSS circulation or absorption. Insertion of a shunt catheter into the lateral ventricle can be performed at the Kocher, Keen, Dandy, Frazier, Kaufmann, or Tubbs points. This study aims to evaluate the trigone point as an alternative location for ventricular shunt insertion Methods: This is a retrospective study. We performed a three-dimensional head CT scan reconstruction of hydrocephalus patients; then, we calculated the vertical and horizontal distances perpendicular to each other from the upper edge of the auricle that intersects the trigone point on the right and left sides of the patient. Data were analyzed using SPSS version 26.0 for Windows. Results: A total of 30 hydrocephalus patients at Kariadi Hospital Semarang from 2021 – 2022 were enrolled in this study. We got the averages of the vertical line is 25.05 mm and the horizontal is 33.00 mm for the right trigone point. In addition, the average vertical line is 25.78 mm and the horizontal line is 34.72 mm for the left trigone point. There was no significant difference between the vertical distance of the right and left trigone points (p=0.578) and the horizontal distance of the right and left trigone points (p=0.185). We found no significant difference between the location of the right and left trigone points. Conclusion: Trigone point can be an alternative location for ventricular shunt installation.

Three-dimensional Analysis of Facial Asymmetry in Unilateral Lambdoid Craniosynostosis.

Unilateral lambdoid synostosis (ULS) is characterized by occipital flattening, mastoid bulging, and contralateral parietal bossing. Anterior craniofacial features are less well-defined. This study utilizes volumetric, craniometric, and composite heat maps of three-dimensional (3D) rendered CT scans to analyze anterior craniofacial asymmetry in ULS and compared to controls. A retrospective review of three-dimensional CT scans. Tertiary care pediatric institution. 30 ULS and 30 control patients. Volumetric and craniometric analysis of the anterior fossa, orbits, zygomas, maxilla, and mandible was performed. The anterior fossa volume was greater bilaterally (0.047, 0.038), and the fossa angle was more anterior contralaterally (<0.001) and more anterior bilaterally than controls (0.038, 0.033). The orbits had greater height and lesser depth bilaterally compared to controls (0.006, 0.009; < 0.001, < 0.001). Zygoma length was significantly greater on the contralateral side than controls (0.048; < 0.001). Nasal contralateral deviation of 3.57 ± 1.97°. The maxillary length was longer on the contralateral side (0.045). The mandibular angle was more anterior on the ipsilateral side and posterior on the contralateral side (<0.001) compared to controls (0.042, < 0.001). Chin had a contralateral deviation of 1.04 ± 3.74°. ULS has significant asymmetry in the anterior craniofacial skeleton. There is a bilateral expansion of the anterior cranial fossa with greater frontal bossing on the contralateral side. Increased orbital height and decreased depth. Contralateral zygomatic and mandibular body lengthening with posterior mandibular deviation. These features may provide more effective diagnosis and potential clinical management strategies.

Experimental study of distribution and quantitative characterization of discontinuous oil phase based on micro-CT

When a sandstone reservoir enters the ultra-high water cut stage, the oil phase changes from continuous to discontinuous, which results in difficulties in the further development and utilization of the reservoir. It is important to clarify the flow law and distribution state of discontinuous oil phases to guide the remaining oil production. This study selected samples from sandstone reservoirs, accurately obtained oil and water phase information from digital core, and constructed matrix based on three-dimensional CT scanning to study the law of discontinuous oil phase distribution. We used digital cores to construct pore network models and calculate the pore radius, throat radius, pore-throat ratio, coordination number, and tortuosity to study the influence of pore structure on discontinuous oil phase flow law. A micro-displacement experiment consisting of two phases of simulated reservoir and development was designed. To improve the accuracy of the experiment, the related pressure was controlled to form bound water in the simulated reservoir formation stage. In the simulated reservoir development phase, in situ scanning of cores at different displacement stages was performed to obtain oil and water distributions at different stages in the same location. The number of oil droplets, 3D shape factor, Euler number, and saturation coefficient of the oil phase were calculated, and the micro-remaining oil clumps were quantitatively analyzed. According to the morphology and distribution characteristics, the remaining oil of the discontinuous phase was divided into the types of the throat, film, droplet, island, and corner. The results showed that the sample with a small pore-throat ratio, large coordination number, and small tortuosity was more likely to form dominant channels; moreover, the remaining oil was more concentrated in this state. In the remaining oil of the discontinuous phase, the number of droplets was the largest and had an obvious displacement effect. The island number was small because the selected samples had good connectivity and it is difficult to form large oil droplets in a single pore. In the ultra-high water cut stage, the throat number increased slowly, which was related to the formation of dominant channels. The corner and the film were difficult to displace; thus, their numbers increased steadily. The quantitative characterization of the discontinuous oil phase is helpful for further study of remaining oil at the pore scale.

The Tomographic Study and the Phenotype of Wormian Bones.

We describe patients who were recognized via conventional radiographs of the skull as manifesting wormian bones. Wormian bones are not a specific diagnostic entity and can be seen in variable forms of syndromic disorders. Seven children and three adults (of 10-28 years) were seen and diagnosed in our departments. The principal complaints for the pediatric and adult group were: ligamentous hyperlaxity, a history of delayed walking and occasional fractures, which later in life started to manifest a constellation of neurological symptoms such as nystagmus, persistent headache, and apnea. Conventional radiographs were the first traditional tools used to recognize wormian bones. We performed 3D reconstruction CT scans to further understand the precise etiology and the nature of these wormian bones and attempted to connect them with a broad spectrum of unpleasant clinical presentations. Our group of patients was consistent with the phenotypic and genotypic diagnoses of osteogenesis imperfecta type I and type IV as well as patients with multicentric carpotarsal osteolysis syndrome. Three-dimensional reconstruction CT scan of the skulls confirmed that these worm-like phenotypes are in fact stemmed from the progressive softening of the sutures. The overall phenotype of the melted sutures is akin to overly stretched pastry. The most concerning sutures in this pathological process are the lambdoid. The overstretching of the lambdoid sutures was responsible for the development of sub-clinical basilar impression/invagination. Patients with certain forms of skeletal dysplasia such as osteogenesis imperfecta type I and IV manifested the heterozygous mutation of COL1A1/COLA2, shown as typical overstretching of the sutures. Similarly, patients with multicentric carpotarsal osteolysis syndrome with a heterozygous missense mutation of MAFB also manifested the phenotype of overly stretched pastry along the skull sutures. What we encountered via 3D reconstruction CT scan in our group of patients was entirely different than the traditional description that can be found in all relevant literature of the last decades. The worm-like phenomenon is in fact a pathological sequel occurring as a result of a progressive softening of the sutures, which results in the overstretching of the lambdoid sutures, a pathological process roughly similar to an overly stretched soft pastry. This softening is totally connected to the weight of the cerebrum (the occipital lobe of the cerebrum). The lambdoid sutures represent the weight-bearing zone of the skull. When these joints are loose and soft, they adversely alter the anatomical structures of the skull and lead to a highly hazardous derangement of the craniocervical junction. The latter causes the pathological upward invasion of the dens into the brain stem, leading to the development of morbid/mortal basilar impression/invagination.

Pedicle morphometry analysis of main thoracic apex adolescent idiopathic scoliosis

IntroductionScrew insertion during scoliosis surgery uses free-hand pedicle screw insertion methods. However, there is a wide variation in pedicle shapes, sizes, and morphometry, especially in scoliosis patients. CT scan pedicle measurements in main thoracic Lenke type 1 adolescent idiopathic scoliosis can help visualize this diversity. This study aimed to highlight the features of pedicle morphometry on the concave and convex sides, including pedicle diameter (width in axial and height in the sagittal plane), the depth to the anterior cortex, and Watanabe Pedicle classification in patients with main thoracic apex adolescent idiopathic scoliosis.Materials and methodsThis study was a cross-sectional observational study of Adolescent Idiopathic Scoliosis (AIS) patients whose apex in the main thoracic patient underwent deformity correction procedures. We used a three-dimensional CT scan to evaluate pedicle morphometry on the apex vertebrae, three consecutive vertebrae above and below the apex.ResultsA total of 6 patients with apex main thoracic AIS with 84 pedicles consisting of 42 pedicles from each concave and convex curve were analyzed. All of the samples were female, with the mean age at the procedure being 21.2 ± 5.56. The mean cobb angle was 62° ± 23°, with the main apex between VT8-VT10. The size of the pedicle was bigger from upper to lower vertebrae. The mean pedicle depth, pedicle width, and pedicle height for the concave side were 36.06 ± 4.31 mm, 3.91 ± 0.66 mm, and 9.16 ± 1.52 mm, respectively. Meanwhile, the convex side is 37.52 ± 1.84 mm, 5.20 ± 0.55 mm, and 11.05 ± 0.70 mm, respectively. We found a significant difference between the concave and convex sides for the pedicle width and height. The concave and convex sides were mainly classified as type C (38%) and type A (50%) Watanabe pedicle.ConclusionPedicle width and pedicle height are significantly different between the concave and the convex side with convex side has better Watanabe pedicle classification. Pre-operative CT evaluation is essential for planning proper pedicle screw placement in AIS patients.

FRACTAL CHARACTERIZATION ON THREE-DIMENSIONAL FRACTUR TORTUOSITY IN COAL BASED ON CT SCANNING

This paper proposed a method for the fractal characterization of the three-dimensional (3D) fracture tortuosity ([Formula: see text] in coal based on CT scanning experiment. The methodology was deduced in detail, and the values of [Formula: see text] of four coal samples were calculated by the rigorous derivation equation established by Feng and Yu. The values of [Formula: see text] by the proposed method fit the relation of [Formula: see text] versus the fractal dimension for 3D fracture number [Formula: see text], and the relation of [Formula: see text] versus the 3D fracture porosity, indicating the rationality and accuracy of the proposed method on estimation of the [Formula: see text]. The results show that the proposed [Formula: see text] can comprehensively character the fractal characteristics of fractures tortuosity in 3D space. It is worth to further study for establishing an analytical fractal equation for fluid mass transfer in 3D fractures of porous media based on the [Formula: see text].

Multimodal imaging assessment of prosthetic mitral valve area after transcatheter mitral valve implantation: A three-dimensional echocardiographic and CT scan study

Multimodal imaging assessment of prosthetic mitral valve area after transcatheter mitral valve implantation: A three-dimensional echocardiographic and CT scan study

Three-dimensional Analysis of Phenotypic Variation in Mercedes Benz Craniosynostosis

Background: Mercedes Benz craniosynostosis is a rare tri-sutural closure pattern of the bilateral lambdoid and sagittal sutures. Variation due to the predominant deformational driving force leads to short and long phenotypes. This study aims to evaluate the volumetric and craniometrics differences between phenotypes and compare them to controls. Methods: Three-dimensional pre-operative CT scans of 15 patients with Mercedes Benz craniosynostosis were retrospectively reviewed along with age and gender-matched controls. The intracranial volume of the anterior, middle, and posterior fossa was calculated. Craniometric measurements included cranial index, frontal bossing angle, occipital bossing angle, and occipital bone angle. Results: The short phenotype was present in 60% of patients, and the long phenotype in 40%. The short phenotype volume was significantly greater in the anterior and middle fossa ( P = .003; P = .002) and significantly less in the posterior fossa ( P &lt; .001). The volumes were not significantly different in the long phenotype. The cranial index was significantly greater in the short phenotype when compared to both the long phenotype and controls ( P &lt; .001; P = .006). Occipital bossing angle was significantly greater in the short phenotype than in controls( P = .029). The short phenotype had a significantly decreased occipital bone angle compared to the long phenotype and controls ( P &lt; .001; P = .001). Conclusion: The short phenotype has increased anterior and middle fossa and decreased posterior fossa volume. Long phenotype had no significant differences in volume distribution. The short phenotype has increased cranial index, increased occipital bossing angle, and decreased occipital bone angle. Craniometric measures were not significantly different in the long phenotype.

Eagle’s syndrome in tertiary health institution, southern region of Nigeria

Eagle’s syndrome is a condition caused by elongation of the styloid process or ossification of the styloid ligament resulting in non-specific symptoms related to pressure on vital blood vessels of the neck, the internal carotid artery, internal jugular vein, and nerves; the glossopharyngeal and vagus nerves. Eagle’s syndrome may have varied presentations with numerous symptoms: Pain in the throat/neck radiating to the ear and pharynx, foreign body sensation in the throat, dysphagia, otalgia, trismus, and intense facial pain. A high index of suspicion with a prompt resort to a three-dimensional CT skull could be helpful to give a quick diagnosis of Eagle’s syndrome amid numerous differential diagnoses. We present a 59-year-old male with an 18-month history of left-sided neck pain, cheek pain, and the feeling of a foreign body in the throat. He had pain relievers and other drugs to no avail. A three-dimensional CT scan of his skull revealed features of Eagle’s syndrome. The excision of the styloid process through the extraoral route relieves his symptoms. The second patient is a 42-year-old female with symptoms of peptic ulcer disease, dysphagia, pain in the throat, and sometimes fainting attacks when she moves her neck swiftly to the left side. A three-dimensional CT skull scan confirmed features of an elongated styloid process bilaterally suggestive of Eagle’s syndrome. Treatment offered to her was conservative, with a diclofenac suppository only because she refused surgery. Restricted and limited neck movement relieved her of syncope attacks.

Treatment of acetabular fracture involving anterior and posterior columns using a single pararectus approach: surgical experience and preliminary results.

This study aims to evaluate the efficacy of single pararectus approach in patients confirmed with acetabular fracture involving anterior and posterior columns. A total of 58 patients confirmed with acetabular fracture involving anterior and posterior columns and treated at our hospital between January 2015 and January 2020 were retrospectively analyzed. A single pararectus approach was applied for all patients. Routine X-rays were performed at follow-up of one, three, six, 12, and 18months, and three-dimensional CT scans were added at six and 18months. Fracture reduction quality was assessed using the Matta score system, and functional assessment used the Modified Merle D'Aubigné and Postel score system. Post-operative complications, including fat liquefaction and deep vein thrombosis, were recorded and analyzed. The median operation time was 186min while the intra-operative blood loss was 421mL. The rate of good-to-excellent reduction was 94.8%, and the rate of good-to-excellent hip function score reached 93.1%. Seven patients presented with post-operative complications, including three intra-operative small vascular injuries, two peritoneal small perforations, one fat liquefaction, and one deep vein thrombosis. Using a single pararectus approach is convenient and effective for treating acetabular fracture involving anterior and posterior columns, especially those involving the quadrilateral area. ChiCTR, ChiCTR2100054604. Registered 21 December 2022. Retrospectively registered, http://www.chictr.org.cn/showproj.aspx?proj=144783 .

Efficacy of the Pre-operative Three-Dimensional (3D) CT Scan Templating in Predicting Accurate Implant Size and Alignment in Robot Assisted Total Knee Arthroplasty.

Nearly 20% of Total knee Arthroplasty patients remain dissatisfied. This is a major concern in twenty-first century arthroplasty practice. Accurate implant sizing is shown to improve the implant survival, knee balance and patient reported outcome. Aim of the current study is to assess the efficacy of pre-operative three-dimensional (3D) CT scan templating in a robot-assisted TKA in predicting the correct implant sizes and alignment. Prospectively collected data in a single center from 30 RA-TKAswas assessed. Inclusion criterion was patients with end stage arthritis (both osteoarthritis and rheumatoid arthritis) undergoing primary TKA. Patients undergoing revision TKA and patients not willing to participate in the study were excluded. Preliminary study of ten patients had indicated almost 100% accuracy in determining the implant size and position. Sample size was estimated to be 28 for 90% reduction in implant size and position error with α error of 0.05 and beta error of 0.20 with power of study being 80. Post-operative radiographs were assessed by an independent observer with respect to implant size and position. The accuracy of femoral and tibial component sizing in the study was compared with the historic control with Chi-squared test. The p value < 0.05 was considered significant. The pre-operative CT scan 3D templating accuracy was 100% (30 out of 30 knees) for femoral component and 96.67% (29 out of 30 knees) for tibial component. The implant position and limb alignment was accurate in 100% of patients. The accuracy of femoral component and tibial component sizing is statistically significant (Chi-squared test, p value 0.0105 and 0.0461, respectively). The study results show the effectiveness of pre-operative 3 D CT scan planning in predicting the implant sizes and implant positioning. This may have a potential to improve the implant longevity, clinical outcomes and patient satisfaction.

Treatment of Scoliosis with One-Stage Posterior Pedicle Screw System by Paraspinal Intermuscular Approach: A Minimum of Two Years of Follow-Up.

To evaluate the clinical efficacy of the treatment of scoliosis with a pedicle screw system through paraspinal intermuscular approach (PIA). This is a retrospective case series study. A total of 10 patients diagnosed with scoliosis had surgical indications and treated with a pedicle screw system in one-stage posterior surgery by PIA from March 2013 to April 2015 at the First Hospital of Jilin University were enrolled in this study. The average age of the patients was 14.9 years, including one male and nine females. The operative information and surgical results, including Cobb angle correction, correction loss, global balance (including Frontal Plane Balance [FPB] and Sagittal Plane Balance [SPB]), and fusion rate were reviewed. Functional outcomes including visual analog scale (VAS) back pain score, leg pain score, and Scoliosis Research Society-22 questionnaire (SRS-22) were used to evaluate the quality of life of patients preoperatively and at last follow-up. Each patient was followed up at least six times. The average follow-up time was 43.2 months. Mean scoliosis and kyphosis improved from 68.5° ± 18.1°to 18.7° ± 11.8° and from 34.4° ± 17.9°to 24.0° ± 6.7°, respectively (p < 0.05); at last follow-up, it was 20.1° and 24.7°, respectively (p > 0.05). During the follow-up, mean coronal and sagittal correction loss was 1.4° ± 1.2°and 0.7° ± 0.8°, respectively (p > 0.05). Mean FPB improved from 32.7 to 11.7 mm (p < 0.05); Mean SPB changed from 0.3 to -0.7 mm (p > 0.05). No dural tears were observed during the corrective surgery or wound infection or implant-related complications. No pseudoarthrosis was identified according to the last follow-up three-dimensional (3D) CT scan. All the domains in SRS-22 questionnaire show statistically significant improvement at the last follow-up (p < 0.05). The VAS back pain scores improved from a mean preoperative score of 1.7 to a mean postoperative score of 0.2 (p < 0.05). This original one-stage posterior PIA is safe and effective in the treatment of scoliosis, which is characterized with less blood loss, shorter operation time, and satisfactory bony fusion.

Anthropometric study using three-dimensional pelvic CT scan in sex determination among adult Indonesian population

This study aims to determine pelvic anthropometry characteristics and logistic regression formula for adult sex identification obtained from adult three-dimensional pelvic computed tomography images. This study was an observational analytical study with retrospective regression and cross-sectional approach. The population was all patients at Radiology Installation of Dr. Soetomo General Academic Hospital as referral hospital in East Indonesian region, from September to December 2019 who underwent 3D pelvic CT examination. Then, age distribution and pelvic measurements data were obtained. In this case, statistical analysis was conducted for all the data obtained. A number of 204 samples were included in this study. All radiologic components were also significantly different between sexes (p < 0.05) except for transverse diameter of sacral segment (p = 0.180). Moreover, the conjugate pelvic inlet diameter (CPID), the left innominate height (LIH), and sub pubic angle (SPA) showed significant values for regression formula to determine an adult’s sex using 3D pelvic CT. The calculation result > 0 is a prediction for female while < 0 is a prediction for male. From logistic regression model calculation, a high validity value (91.05%) was found with 100% sensitivity to identify male sex and 81.1% specificity to identify female sex. There were differences on radiometric variable characteristics in pelvic anthropometric study among adult Indonesians at Dr. Soetomo General Academic Hospital, Surabaya. The estimated values of pelvic measurements using 3D CT images could develop a pelvic model with a regression formula with high accuracy value using CPID, LIH, and SPA values.