Three-component Synthesis Research Articles

Three-Component Synthesis of Multiply Functionalized 5,6-Dehydroisoquinuclidines through Dearomatization of Pyridine.

A three-component synthesis of multiply functionalized 5,6-dehydroisoquinuclidines is described. After the formation of an N-alkylpyridinium salt, Grignard addition led to the formation of the corresponding 1,2-dihydropyridine bearing an alkyl, alkene, aryl, or alkynyl group. Subsequent Diels-Alder reaction with a dienophile provided functionalized dehydroisoquinuclidines in high yields (up to 93%) with endo selectivities (73:27 to >99:1). This reaction was applicable to the synthesis of an N-(4-methoxybenzyl)pyridinium salt, where the 4-methoxybenzyl group was switched to a benzyloxycarbonyl group after the formation of the dehydroisoquinuclidine.

A Hollowed-Out Heterometallic Cluster for Catalytic Knoevenagel Condensation.

Lanthanide-containing clusters are synthetically Lanthanide-containing clusters are synthetically challenging and with significant chemical and materials applications.Herein, two isostructural heterometallic clusters of the formula (NO3)12@[Ln132Ni78(OH)292(IDA)48(CH3COO)96(NO3)12(H2O)78]Cl44·xH2O·yCH3OH(IDA = iminodiacetate; Ln = Gd1,x= 110,y= 0; Ln = Eu2,x= 95,y= 40)were obtained via co-hydrolysis of Ln3+(Gd3+orEu3+) and Ni2+in the presence of iminodiacetate(IDA). Crystallographic studies show that each features a truncated tetrahedral core of Ln132Ni78within which avoid of 5.5 Å in diameter; connecting the central cage and its exterior are four trumpet-like passageways surface-decorated with dinuclear units of [Gd(μ3-OH)2Gd]. Mass spectroscopic analyses indicate that both clusters maintained their structural integrity in aqueous solution, with cryo-electron microscopyproviding the most convincing visual evidence in support of the cluster's solution stability. Size-selective Knoevenagel condensation, believed to occur in the passageways on the basis of experimental and molecular modeling results,was achieved in the presence of1. The application of 1as a uniquely structured molecular reactor and a recyclable heterogeneous catalyst was further illustrated by the one-pot three-component synthesis of biologically and pharmaceutically significant4H-pyran derivatives.

Regioselective Synthesis of Cycloalkane-fused Pyrazolo[4,3-e]pyridines through Tandem Reaction of 5-aminopyrazoles, Cyclic Ketones and Electron-rich Olefins.

Pyrazolopyridines are interesting fused heterocyclic pharmacophores that combine pyrazole and pyridine; two privileged nuclei extensively studied and with a wide range of applications. They can be obtained by a broad variety of synthetic methods among which multicomponent reactions have gained importance, especially from 5-aminopyrazoles and dielectrophilic reagents. However, the search for new approaches more in tune with sustainable chemistry and the use of unconventional heating in three-component synthesis are open and highly relevant study fields. A novel, practical and efficient three-component synthesis of cycloalkane-fused pyrazolo[ 4,3-e]pyridines was developed through a tandem reaction of 5-aminopyrazoles, cyclic ketones and electron-rich olefins, using microwave induction in perfluorinated solvent and iodine as catalyst. The microwave-induced three-component approach applied in this work promoted the construction of 10 new pyrazolopyridines with high speed and excellent control of regioselectivity, favoring the linear product with good yields; where the versatility of electron-rich olefins in iodine-catalyzed cascade heterocyclizations, granted the additional benefit of easy isolation and the possibility to reuse the fluorous phase. Although pyrazolopyridines have been synthetically explored because of their structural and biological properties, most of the reported synthetic methods use common or even toxic organic solvents and conventional heating or multi-step processes. In contrast, this study applied a multicomponent methodology in a single step by microwave induction and with the versatility provided in this case by the use of perfluorinated solvent, which allowed easy isolation of the final product and recovery of the fluorous phase.

Synthesis, Antimicrobial and Antioxidant Activity of Some New Pyrazolines Containing Azo Linkages.

Pyrazolines and azo-pyrazolines are influential groups of heterocyclic compounds with two nitrogen atoms inside the five-membered ring. They play an important role in a wide range of biological processes, such as antifungal, antioxidant, antimalarial and other antimicrobial activities. The main objective of this study is to synthesize some new heterocyclic compounds with antioxidant and antimicrobial activity Methods: One-pot three components and traditional synthesis of new azo-pyrazoline compounds were achieved in this work. The preparation process has been started by diazotizing 4-(6-methylbenzothiazol-2-yl) benzamine and its coupling reaction with 4-hydroxy acetophenone producing azo-acetophenone, followed by benzylation with benzyl chloride to form the starting material, azo-benzyloxy acetophenone. A series of substituted benzaldehydes were reacted with the latter compound via one pot and classical methods, forming new chalcones containing azo linkages and benzyloxy moieties, which were then converted into new target azo-pyrazoline derivatives. The structures of the synthesized compounds were confirmed by spectroscopic techniques using FT-IR, 1H-NMR, 13C-NMR, and 13C- DEPT- 135 spectra. Finally, the synthesized compounds were screened for their antioxidant and antimicrobial activities against Staphylococcus aureus and Escherichia coli. Overall, the one-pot three-component synthesis of pyrazoline compounds generally provides advantages in terms of efficiency, simplicity, and time-consumption compared to classical synthesis methods. Hence, the study advocates the one-pot method because it eliminates the tedious process of making chalcones, which takes time, materials, and unnecessary effort. Therefore, this is the most convenient and effective approach to green chemistry.

Catalyst-free one-pot three-component synthesis and in silico bioactivity of new 4-pyrazolyl pyrano[3,4-c] pyrrole derivatives

Catalyst-free one-pot three-component synthesis and in silico bioactivity of new 4-pyrazolyl pyrano[3,4-c] pyrrole derivatives

Three-Component Syntheses of Functionalized Selenocyanates

AbstractA metal-free Meerwein-type arylation protocol of α,β-unsaturated compounds is reported. 4-Aryl-3-selenocyanatobutan-2-ones, methyl 3-aryl-2-selenocyanatopropanoates, 3-aryl-2-selenocyanatopropanenitriles, and 1-aryl-2-phenyl-2-selenocyanatoethanes were prepared by a selenocyanatoarylation reaction from easily available arenediazonium tetrafluoroborates, potassium selenocyanate, and methyl vinyl ketone, methyl acrylate, acrylonitrile, or styrene, respectively, in 39–84% yields. The reaction proceeds smoothly and quickly under mild reaction conditions. The reaction can be scaled to the gram scale. A mechanism for this reaction is proposed.

Three-Component Synthesis of 1-Substituted 5-Aminotetrazoles Promoted by Bismuth Nitrate.

A nontoxic bismuth-promoted multicomponent synthesis of 5-aminotetrazoles and bistetrazoles is reported. The reaction of phenyl isothiocyanate, NaN3, and amine (primary aliphatic, aromatic, and aliphatic diamine) promoted by Bi(NO3)3·5H2O under microwave heating affords good yields, short reaction times, simple workup, and purification without column chromatography. A set of diagnostic 1H NMR signals was identified as a guide for quickly elucidating the exclusive (or main) regioisomer formed, with the stronger electron donor group located at heterocyclic nitrogen 1. This regioselectivity is strongly dependent on the electronic density of the amine. It is opposite to that obtained by several thiourea desulfurization methods promoted by thiophilic metals and metal-free protocols.

Mild Catalyst- and Additive-Free Three-Component Synthesis of 3-Thioisoindolinones and Tricyclic γ-Lactams Accelerated by Microdroplet Chemistry.

Isoindolinones, bearing both γ-lactam and aromatic rings, draw extensive interest in organic, pharmaceutical, and medicinal communities as they are important structural motifs in many natural products, bioactive compounds, and pharmaceuticals. As the main contributor to isoindolinone synthesis, metal catalysis is associated with many drawbacks including essential use of toxic/precious metals and excessive additives, high reaction temperatures, specially predesigned starting materials, and long reaction times (typically 8-30 h). In this study, we developed a catalyst- and additive-free, minute-scale, and high-yield microdroplet method for tricomponent isoindolinone synthesis at mild temperatures. By taking advantage of the astonishing reaction acceleration (1.9 × 102-9.4 × 103 acceleration factor range with a typical rate acceleration factor of 1.51 × 103 for the prototype reaction as the ratio of rate constants by microdroplet and bulk phase), 12 3-thioisoindolinones and two tricyclic γ-lactams were synthesized using various 2-acylbenzaldehydes, amines, and thiols with satisfactory yields ranging from 85% to 97% as well as a scale-up rate of 3.49 g h-1. Because of the advantages (no use of any catalysts or additives, mild temperature, rapid and satisfactory conversion, broad substrate scope, and gram scalability), the microdroplet method represents an attractive alternative to metal catalysis for laboratory synthesis of isoindolinones and their derivatives.

Magnetic BiFeO3 nanoparticles: a robust and efficient nanocatalyst for the green one-pot three-component synthesis of highly substituted 3,4-dihydropyrimidine-2(1H)-one/thione derivatives.

In this research, magnetic bismuth ferrite nanoparticles (BFO MNPs) were prepared through a convenient method and characterized. The structure and morphological characteristics of the prepared nanomaterial were confirmed through analyses using Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), elemental mapping, powder X-ray diffraction (XRD), N2 adsorption-desorption isotherms and vibrating sample magnetometry (VSM) techniques. The obtained magnetic BFO nanomaterial was investigated, as a heterogeneous Lewis acid, in three component synthesis of 3,4-dihydropyrimidin-2 (1H)-ones/thiones (DHPMs/DHPMTs). It was found that the BFO MNPs exhibit remarkable efficacy in the synthesis of various DHPMs as well as their thione analogues. It is noteworthy that this research features low catalyst loading, good to excellent yields, environmentally friendly conditions, short reaction time, simple and straightforward work-up, and the reusability of the catalyst, distinguishing it from other recently reported protocols. Additionally, the structure of the DHPMs/DHPMTs was confirmed through 1H NMR, FTIR, and melting point analyses. This environmentally-benign methodology demonstrates the potential of the catalyst for more sustainable and efficient practices in green chemistry.

Catalyst-Free, Three-Component Synthesis of Amidinomaleimides.

Maleimide and amidine functionalities often appear in medicinal and natural product targets. We describe a catalyst-free, three-component coupling reaction for the synthesis of amidinomaleimides. This one-pot reaction fuses a broad range of secondary amines and aldehydes with azidomaleimides. The conditions are mild, simple, modular, high yielding, and amenable to aqueous solvents. Most reaction products can be sufficiently purified without column chromatography. The synthesis creates complex, multifunctional molecules with four different molecules, including a tripeptide, arrayed around an amidinomaleimide core.

One-pot Three-component Synthesis of Fully and Diversely Functionalized Pyrans and Spiropyrans Using Sodium Formate as Catalyst in Aqueous Ethanol at Room Temperature

Abstract: A convenient and general method has been developed for the synthesis of fully and diversely functionalized pyrans via one-pot three-component reactions of various aryl or heteroaryl aldehydes, malononitrile, and 1,3-dimethyl/1,3-diethyl-acetonedicarboxylates in the presence of a catalytic amount of sodium formate as an efficient organocatalyst in aqueous ethanol at room temperature. All the scaffolds were synthesized in excellent yields within 2.5 hours. Under the same reaction conditions, fully and diversely functionalized spiro-pyrans were also synthesized in excellent yields from the reaction of isatin, malononitrile, and 1,3-dimethyl/1,3-diethylacetonedicarboxylates. All the products were isolated pure just by simple filtration. Synthesis of fully and diversely functionalized biologically promising pyrans, excellent yields, use of organocatalyst, less toxic solvent, no column chromatographic purification, and energy efficiency are some of the major advantages of this newly developed protocol. method: In a clean test tube a magnetic stir bar, 0.5 mmol of aldehydes (1a-1i), 0.5 mmol of malononitrile (2; 0.033 g) and 0.5 mmol of 1,3-dimethylacetonedicarboxylate (3a; 0.087 g) or 1,3-diethylacetonedicarboxylate (3b; 0.101 g), 4 ml aqueous ethanol (1:1 v/v) and 20 mol% sodium formate were taken sequentially. The whole reaction mixture was stirred at room temperature for the time mentioned in Table 2. The progress of reaction was monitored by TLC. By using the same amount of catalyst and solvent the synthesis of methyl/ethyl-2'-amino-3'-cyano-6'-(2-meth/ethoxy-2-oxoethyl)-2-oxospiro[indoline-3,4'-pyran]-5'-carboxylate (6a/6b) was achieved from the reactions of 0.5 mmol of isatin (5; 0.0735 g), 0.5 mmol of malononitrile (2; 0.033 g) and 0.5 mmol of 1,3-dimethylacetonedicarboxylate (3a; 0.0871 g) or 1,3-diethylacetonedicarboxylate (3b; 0.1011 g). After the completion of each reaction, the desired products were isolated simply by filtration and subsiquent washing with aqueous ethanol (EtOH:H2O = 1:1).

Three-component Synthesis of Tetrahydrobenzo[b]pyrans Using MMWCNTs-PEG-IL as a Novel Magnetic Immobilized Ionic Liquid

Introduction: A novel immobilized imidazolium type ionic liquid was synthesized using poly(ethylene glycol) (PEG) functionalized magnetic multi-walled carbon nanotubes. This immobilized ionic liquid (MMWCNTs-PEG-IL) was characterized by FT-IR, VSM, XRD, FE-SEM and EDX analysis. Method: Then, it was used as a magnetic catalyst in a three-component reaction to yield tetrahydrobenzo[b]pyran derivatives. First, optimized reaction conditions were investigated. A mixture of containing dimedone (1 mmol), malononitrile (1 mmol), benzaldehyde (1.2 mmol) and MMWCNTs-PEG-IL (0.03 g) in H2O/EtOH (5 mL) was stirred at 70 °C. After completion of the reaction, the mixture was cooled. Results: Then, an external magnet was used to separate the magnetic catalyst. This method has many advantages including high reaction yields, high TOFs, using non-toxic solvents, easy handling of catalyst, simple separation of catalyst from reaction medium and short reaction times. Conclusion: Also, the reusability of the magnetic catalyst has been investigated in 7 runs without serious loss of reaction yield.

One-Pot, Multi-Component Green Microwave-Assisted Synthesis of Bridgehead Bicyclo[4.4.0]boron Heterocycles and DNA Affinity Studies.

Anthranilic acids, salicylaldehydes and arylboronic acids reacted in EtOH/H2O (1/3) at 150 °C under microwave irradiation for 1 h to give, in excellent yields and purity, twenty-three bridgehead bicyclo[4.4.0]boron heterocycles via one-pot, three-component green synthesis. The scope and the limitations of the reactions are discussed in terms of the substitution of ten different anthranilic acids, three salicylaldehydes and three arylboronic acids. The replacement of salicylaldehyde with o-hydroxyacetophenone demanded a lipophilic solvent for the reaction to occur. Eight novel derivatives were isolated following crystallization in a toluene-containing mixture that included molecular sieves. The above one-pot, three-component reactions were completed under microwave irradiation at 180 °C within 1.5 h, thus avoiding the conventional prolonged heating reaction times and the use of a Dean-Stark apparatus. All derivatives were studied for their affinity to calf thymus DNA using proper techniques like viscosity and UV-vis spectroscopy, where DNA-binding constants were found in the range 2.83 × 104-8.41 × 106 M-1. Ethidium bromide replacement studies using fluorescence spectroscopy indicated Stern-Volmer constants between 1.49 × 104 and 5.36 × 104 M-1, whereas the corresponding quenching constants were calculated to be between 6.46 × 1011 and 2.33 × 1012 M-1 s-1. All the above initial experiments show that these compounds may have possible medical applications for DNA-related diseases.

An efficient, green and solvent-free three-component synthesis of 2,4,6-triarylpyridines utilizing ZSM-5 as a heterogeneous catalyst

ZSM-5, an efficient and reusable heterogeneous catalyst, is employed for the one-pot, three-component synthesis of 2,4,6-triarylpyridines from substituted benzaldehydes, acetophenones and ammonium acetate using a simple, efficient, and green method. Both electron-releasing and withdrawing aldehydes and ketones went smoothly into substituted 2,4,6-triarylpyridines. Notably, the present reaction was carried out in the solvent-fee condition. The key merits of the present protocol are the milder reaction condition, easy workup protocol, high yield of desired pyridines and recyclability and reusability of the catalyst. The developed protocol offers a broad scope of substrate applicability and good sustainability.

Nonoxidovanadium(IV) Complex-Catalyzed Synthesis of 2-Amino-3-cyano-4H-pyrans/4H-chromenes, Biscoumarins, and Xanthenes under Green Conditions.

Reaction of [VIVO(acac)2] (Hacac = acetylacetone) with a Mannich base, N,N,N',N'-tetrakis(2-hydroxy-3,5-di-tert-butyl benzyl)-1,2-diaminoethane (H4L, I) in a 1:1 molar ratio in MeOH, leads to the formation of the nonoxidovanadium(IV) complex [VIVL] (1). Air stable complex 1 has been characterized using various spectroscopic techniques, DFT calculations, and single-crystal X-ray studies. 1 adopts distorted octahedral geometry where ligand coordinates through all coordination functionalities available. This complex has been used as a catalyst in the one-pot, three-component synthesis of 2-amino-3-cyano-4H-pyrans using 1,3-dicarbonyls (1,3-cyclohexanedione, dimedone, barbituric acid, and 4-hydroxycoumarin), malononitrile, and various substituted aromatic aldehydes in equimolar amounts employing ethanol as a green solvent. The catalytic reaction revealed that the multicomponent synthesis of 4H-pyrans and chromenes is greatly influenced by both types of 1,3-dicarbonyl compound employed and the nature of the substituent on the aromatic ring of the aldehyde. Synthesized catalyst has also been used in the synthesis of pharmacologically relevant oxygen-containing heterocycles, specifically, 1,8-dioxo-octahydro-1H-xanthenes and biscoumarins. The possible mechanism for the synthesized one-pot, multicomponent product has been proposed by isolating intermediate(s) generated during synthesis.

Heterocycle-guided synthesis of m-hetarylanilines via three-component benzannulation.

A one-pot three-component synthesis of substituted meta-hetarylanilines from heterocycle-substituted 1,3-diketones has been developed. The electron-withdrawing power of the heterocyclic substituent (which can be estimated on the basis of calculated Hammett constants) in the 1,3-diketone plays a pivotal role in the studied reaction. The series of meta-hetarylanilines prepared (21-85% isolated yield) demonstrates the synthetic utility of the developed method.

Three-Component Synthesis of Tetrahydroisoquinolines via SNVin Reaction

Three-Component Synthesis of Tetrahydroisoquinolines via SNVin Reaction

O,S,Se-containing Biginelli products based on cyclic β-ketosulfone and their postfunctionalization.

A one-pot three-component Biginelli synthesis of dihydropyrimidinones/thiones/selenones via acetic acid or solvent-free Yb(OTf)3-catalyzed tandem reaction of β-ketosulfone (dihydro-2H-thiopyran-3(4H)-one-1,1-dioxide), an appropriate urea, and arylaldehyde has been developed. The reaction proceeds with high chemo- and regioselectivity to give diverse DHPMs in reasonable yields up to 95%. Moreover, an SO2-containing analogue of anticancer drug-candidate enastron (SO2 vs C=O) was obtained by using the here reported method in gram scale. We also demonstrate the reactivity of the Biginelli product in various directions - synthesis of condensed thiazoles and tetrazoles. In silico assessment of ADMET parameters shows that most compounds meet the lead-likeness requirements. The biological profiles of new compounds demonstrate high probability levels of activity against the following pathogens/diseases: Candida albicans, Alphis gossypii, Tripomastigote Chagas, Tcruzi amastigota, Tcruzi epimastigota, Leishmania amazonensis, and Dengue larvicida.

One-pot three-component synthesis of 2,4-dimethoxy-5,8,9,10-tetrahydropyrimido[4,5-b]quinolinone derivatives along with in silico and in vitro investigation of their antimalarial activity

Pyrimidoquinolinone-derived compounds have exhibited a broad spectrum of biological activities and have been acknowledged as a potential antimalarial scaffold through multiple conventional strategies. In the present study, a novel series of 2,4-dimethoxy-5,8,9,10-tetrahydropyrimido[4,5-b]quinolinones 4(a-m) were synthesized via a one-pot three-component reaction of cyclohexane-1,3‑dione, 4-amino-2,6-dimethoxypyrimidine and various aldehyde with l-proline as the catalyst and acetic acid as the solvent under reflux condition. In vitro antimalarial activity toward P. falciparum 3D7 strain cultures were investigated. Compounds 4b and 4m demonstrated significant efficacy against strains of P. falciparum, with IC50 values of 0.63 and 0.65 μg/mL, respectively. The results were also supported by molecular docking and ADME assays.

Eco-Friendly One-Pot Synthesis of Tetrahydrobenzo[b]Pyran and Dihydropyrano[3,2-c]Chromene Derivatives Using Functionalized Fe3O4@SiO2@SO3H Under MWI

The present work describes a greener method of preparation of Fe3O4 nanoparticles, which are then functionalized to Fe3O4@SiO2@SO3H, and employed in the one-pot three-component synthesis of tetrahydrobenzo[b]pyran and dihydropyrano[3,2-c]chromene derivatives. These synthesized derivatives are an important class of heterocyclic scaffolds and exhibit significant potential as anti-coagulant, diuretic, spasmolytic, anticancer, and anti-anaphylactic agents. The prepared MNP-based catalysts were characterized using XRD, FE-SEM, VSM, TG-DTA, and Raman spectroscopy. The synthesis of derivatives involved the condensation reaction of enolizable compounds with aldehyde, dimedone, and ethyl cyanoacetate for tetrahydrobenzo[b]pyran, and the reaction of aromatic aldehyde, 4-hydroxycoumarin, and malononitrile for dihydropyrano[3,2-c]chromene synthesis. The reaction was optimized using different techniques such as stirring, ultrasonication, and microwave irradiation, with microwave irradiation method demonstrating faster product separation and high yield. The homogeneity of the isolated product was analyzed by FT-IR,1H-13C-NMR, and mass spectrometry. The advantages of this method include its simplicity, eco-friendliness, cost-effectiveness, and it also evades the use of toxic metals and solvents. The product is easily isolated through a simple workup process and recrystallization using ethanol yields pure product isolation.