Thoracoscopic Pulmonary Segmentectomy Research Articles

Uniportal video-assisted thoracic surgery: segmentectomy versus lobectomy-early outcomes.

To assess the feasibility and safety of uniportal video-assisted thoracoscopic pulmonary segmentectomy compared with lobectomy by studying early postoperative outcomes. We included all patients who underwent uniportal segmentectomy and lobectomy between 2017 and 2022 at Karolinska University Hospital. Early clinical outcomes were compared between the uniportal segmentectomy and lobectomy groups. Differences in baseline characteristics were addressed using inverse probability of treatment weighting. A total of 833 patients (232 segmentectomy, 601 lobectomy) were included. The number of uniportal operations increased during the study period. Patients in the segmentectomy and lobectomy groups, respectively, had stage I lung cancer in 65% and 43% of the cases; 97% and 94% had no postoperative complications, the median number of lymph node stations sampled was 4 vs 5, and non-radical microscopic resection occurred in 1.7% vs 1.8%. The drains were removed on postoperative day 1 in 75% vs 72% of the patients following segmentectomy and lobectomy, respectively, and 90% vs 89% were discharged directly home. Uniportal video-assisted segmentectomy was performed with similar early postoperative clinical results compared with uniportal lobectomy in patients with benign, metastatic or early-stage lung cancer.

Learning curve for uniportal thoracoscopic pulmonary segmentectomy: how many procedures are required to acquire expertise?

Minimally invasive surgeries are increasingly being performed. However, few studies have evaluated the learning curve for uniportal thoracoscopic segmentectomies. Therefore, we investigated the learning curve for uniportal thoracoscopic segmentectomy in our department. We retrospectively reviewed the clinical data of consecutive patients who underwent uniportal thoracoscopic segmentectomy at our institution between February 2019 and January 2022. Two senior surgeons [Hitoshi Igai (H.I.) and Natsumi Matsuura (N.M.)] performed all of the surgeries. H.I. introduced uniportal thoracoscopic segmentectomy in our department and supervised N.M. performing this operation. Resident surgeons participated in the operations as assistants. The learning curve for uniportal thoracoscopic segmentectomy was evaluated on the basis of operative time and cumulative sum (CUSUMOT). The entire team, including resident surgeons, completed the learning curve by performing 60 surgeries. The learning curve consisted of three phases: initial learning (60 surgeries), accumulation of competence (16 surgeries), and acquisition of expertise (17 surgeries), respectively. The operative time, blood loss, postoperative drainage, and postoperative hospitalization time significantly improved across the phases. N.M. completed the initial learning curve faster than H.I. (16 and 29 surgeries, respectively). Under supervision by an experienced surgeon, a team successfully completed the learning curve for uniportal thoracoscopic segmentectomy and achieved good perioperative outcomes, which indicates the importance of appropriate supervision for acquiring expertise for this surgery.

Preoperative percutaneous needle indigo carmine and lipiodol mixture marking in lung segmentectomy.

For successful nodule localization and appropriate surgical margin distances in pulmonary segmentectomy for patients with lung malignancies, the effectiveness and feasibility of preoperative marking using an indigo carmine and lipiodol mixture remain unclear. Patients who underwent thoracoscopic pulmonary segmentectomy with (marking group, n = 69) and without (non-marking group, n = 265) preoperative marking at our institution from January 2013 to March 2020 were retrospectively reviewed and compared in terms of surgical outcomes. All markings were performed using a fine needle to percutaneously inject an indigo carmine and lipiodol mixture under the guidance of computed tomography fluoroscopy. Successful localization was achieved in 66 (96%) patients, of whom 62 (94%) underwent dye pigmentation and 4 (6%) underwent intraoperative fluoroscopy. On images, the marking group showed a significantly longer distance between the lung surface and tumour [mm, 9 (1-17) vs 0 (0-10); P < 0.01] and smaller maximum tumour size [mm, 16 (11-21) vs 17 (13-23); P = 0.03] and consolidation tumour ratio [0.4 (0.3-1) vs 0.8 (0.4-1); P < 0.01] than the non-marking group. Both groups had comparable operative outcomes, perioperative complications, pulmonary function changes and surgical margin distances [mm, 20 (15-21) vs 20 (15-20); P = 0.96] without any local recurrence on the surgical margin. Propensity score-matching analysis also showed similar findings for both groups. Thoracoscopic pulmonary segmentectomy with preoperative marking using an indigo carmine and lipiodol mixture may be an acceptable therapeutic option for small malignancies located in deep lung parenchyma.

Uniportal thoracoscopic pulmonary segmentectomy provides good perioperative results and early postoperative recovery.

BackgroundAlthough video-assisted thoracoscopic surgery (VATS) segmentectomy has become widespread, the advantage of uniportal VATS (U-VATS) segmentectomy over multiportal VATS (M-VATS) remains controversial. The purpose of this study was to verify the safety and usefulness of U-VATS segmentectomy compared with conventional hybrid/multiportal segmentectomy.MethodsHere, we retrospectively reviewed the data from anatomical pulmonary segmentectomy cases in a single institution from March 2010 to March 2021. Patients were divided into the U-VATS and hybrid/multiportal VATS (H/M-VATS) groups. Perioperative results were compared between the groups after matching for patient background characteristics. In addition, cases of complex segmentectomy were selected from each group and compared in terms of perioperative results.ResultsA total of 180 patients underwent pulmonary segmentectomy during the study period at this institution, comprising 57 cases in the U-VATS group and 123 cases in the H/M-VATS group. After matching for age, sex, disease, tumor location, and type of segmentectomy, no significant differences between the groups were seen in blood loss, major intraoperative bleeding, rate of conversion to thoracotomy, postoperative complications, or re-hospitalization within 30 days after discharge. Operation time (141±46 vs. 174±45 min, P<0.001), postoperative drainage duration (1.5±1.2 vs. 2.3±1.8 days, P=0.007), and postoperative hospital stay (3.4±2.0 vs. 4.6±2.5 days, P=0.006) were significantly lower in the U-VATS group. Subgroup analysis of the complex segmentectomy cases also revealed that operation time (146±34 vs. 185±47 min, P<0.001), postoperative drainage duration (1.5±1.3 vs. 2.2±1.2 days, P=0.021), and postoperative hospital stay (3.0±1.4 vs. 4.9±2.1 days, P<0.001) were significantly reduced in the U-VATS group.ConclusionsU-VATS segmentectomy appears as safe and feasible as H/M-VATS segmentectomy. An experienced surgeon can make a smooth transition to U-VATS.

Thoracoscopic anatomic pulmonary segmentectomy for the treatment of congenital lung malformation in children

BackgroundLung-sparing surgery has been used to treat congenital lung malformation in children, and segmentectomy has been advocated as a lung-preservation strategy. However, thoracoscopic pulmonary segmentectomy has gained limited popularity considering the complications, the potential for residual lesions, and the technical difficulties associated with this procedure. Therefore, this study aimed to investigate the safety and feasibility of pediatric thoracoscopic anatomic pulmonary segmentectomy for the treatment of congenital lung malformations. MethodsWe conducted a retrospective review of the medical records of 568 patients who were treated at West China Hospital, Sichuan University, from January 2014 to January 2020. The patients were divided into segmentectomy and lobectomy groups according to the surgical procedures they underwent. Clinical and follow-up outcomes were compared between the two groups. ResultsThe segmentectomy and lobectomy groups included 206 and 361 cases, respectively. The mean intraoperative blood loss was significantly higher in the segmentectomy group (6.9 mL vs. 4.5 mL; p = 0.03). The mean surgical time was also significantly longer in the segmentectomy group, (55.6 min vs. 41.5 min; p = 0.018). However, the incidence of complications did not differ significantly between the two groups (2.9% vs. 1.1%, p = 0.21). Patients in both groups did not require reoperation or show residual lesions during hospitalization and follow-up. ConclusionsThoracoscopic anatomic pulmonary segmentectomy is a safe and feasible definitive lung-sparing treatment for specific cases of congenital lung malformation, and has a complication rate comparable to that of thoracoscopic lobectomy.

Preoperative Simulation of Thoracoscopic Segmentectomy

When performing thoracoscopic pulmonary segmentectomy, we sometimes encounter a nonpalpable malignant tumor located near the intersegmental plane that we had planned to divide. In such a situation it can be difficult to ensure a sufficient surgical margin. To overcome this problem, we now perform preoperative simulation using the Ziostation2 (Ziosoft, Tokyo, Japan) to calculate the surgical margin. This yields margins of at least 20 mm; the discrepancy between the virtual and actual surgical margins is always less than 5 mm.

Feasibility and effectiveness of thoracoscopic pulmonary segmentectomy for non-small cell lung cancer: Retraction.

Feasibility and effectiveness of thoracoscopic pulmonary segmentectomy for non-small cell lung cancer: Retraction.

Infrared thoracoscopic pulmonary segmentectomy with intravenous indocyanine green administration using preoperative simulation.

Infrared thoracoscopy with intravenous indocyanine green administration is one of the useful methods to identify an appropriate intersegmental line during thoracoscopic pulmonary segmentectomy. In this procedure, we have introduced preoperative simulation to calculate the distance between the target tumour and intersegmental plane using Ziostation2 (Ziosoft, Tokyo, Japan) to ensure sufficient surgical margin without palpation. By using this preoperative simulation, we obtained sufficient surgical margin in a patient with a 16-mm part-solid nodular shadow undergoing infrared thoracoscopic upper division (S1-3) segmentectomy of left upper lobe with intravenous indocyanine green administration. The discrepancy between the virtual and the actual surgical margin was <10 mm. This preoperative simulation can help us obtain sufficient surgical margin without palpation of the tumour in infrared thoracoscopic segmentectomy.

Three-dimensional interactive quantitative surgical planning inferior pulmonary ligament approach VATS right S9+10 segmentectomy

: With the rapid development of thoracic surgical technology, a series of new surgical methods have been applied in clinical practice. Thoracoscopic pulmonary segmentectomy has become a common surgical procedure in thoracic surgery. Compared with traditional lobectomy, anatomic segmentectomy can preserve more lung function and is suitable for patients with early lung cancer. More and more patients and doctors prefer anatomical segmentectomy. Anatomical segmentectomy is a much more complex procedure than lobectomy, and it’s challenging and technique demanding, especially when performed under total thoracoscopic visualization. The main reason lies in the difficulty in dissecting the frequently variable segmental structures (vein, artery, and bronchus) and identifying the accurate intersegmental planes. While the basal segment of the lower lobe is relatively complex and variable, the thoracoscopic S9+10 segmentectomy is one of the most technically challenging anatomical segmentectomies, because of deeper intraparenchymal localization of the hilar structures, more frequent variations, and more complex neighboring relationships of the intersegmental planes. The three-dimensional reconstruction images obtained by computed tomography (CT) scan show that anatomy is excellent. It can help us understanding the anatomic relationship of bronchi, pulmonary arteries and veins clearly before operation, nodal location, ensuring the safety of the segmental margin, estimating the volume of the target segment, making the operation plan, planning of surgical approach and the operation steps, which is absolutely necessary for safe anatomy.

Clinical Application of Three-Dimensional Reconstruction Technique in Thoracoscopic Pneumonectomy

Objective. To investigate the clinical value of 3D computed tomography bronchoangiography (3D CTBA) in thoracoscopic anatomical lung segment resection or combined lung segment resection. Methods. The clinical data of 25 patients with non-small-cell lung cancer who underwent thoracoscopic radical lobectomy and pulmonary segmentectomy with pulmonary nodules were retrospectively analyzed. All patients underwent preoperative thin-slice CT scan, and the bronchus, pulmonary artery, and pulmonary vein were reconstructed by DeepInsight software. Meanwhile, pulmonary nodules, tumors, or enlarged lymph nodes were reconstructed. Accurate preoperative planning was carried out through preoperative reconstruction of three-dimensional images, especially the variation of pulmonary bronchus and blood vessels, the relationship between tumors and enlarged lymph nodes and pulmonary blood vessels, and the precise positioning of pulmonary nodules in pulmonary segments. Compared with preoperative three-dimensional reconstruction, intraoperative real-time navigation can achieve accurate operation. The intraoperative conversion to thoracotomy, operative time, intraoperative bleeding and postoperative hospitalization time, drainage tube removal time and total drainage volume, and the incidence of perioperative complications were recorded. Results. The anatomical structure and variation of bronchus and pulmonary vessels were clearly reconstructed in all patients, and the reconstruction of the relationship between central tumor and enlarged lymph nodes and blood vessels was satisfactory. The location of pulmonary nodules in pulmonary segments was clearly defined, and preoperative planning was performed accurately. All patients underwent real-time intraoperative navigation, and precise surgery was performed according to the preoperative planning. The operation was successfully completed without any transfer to thoracotomy or intraoperative accidental bleeding. The operative time was (147.60 ± 37.77) min, the intraoperative blood loss was (33.82 ± 22.17) mL, the postoperative hospital stay was (7.02 ± 1.78) d, drainage tube removal time was (4.68 ± 1.60) d, and postoperative total drainage volume was (221.00 ± 135.03) mL; there were no severe complications and no death during perioperative period. Conclusion. The application of three-dimensional reconstruction technique for preoperative evaluation and subsequent thoracoscopic pulmonary segmental resection can achieve accurate, safe, and effective pulmonary segmental resection, reduce the difficulty of thoracoscopic pulmonary segmental resection, reduce the risk of surgery, and improve the surgical effect.

The application of virtual segmentectomy based on three-dimensional computed tomography and angiography in thoracoscopic segmentectomy for children and infants.

The purpose of this retrospective study was to evaluate the efficacy of anatomic thoracoscopic pulmonary segmentectomy performed based on three-dimensional computed tomography bronchography and angiography (3D-CTBA) in children and infants. Totally, 22 patients received thoracoscopic segmentectomy from October 2019 to February 2020. The procedures were performed virtual segmentectomy based on 3D-CTBA. The preoperative planning depended on the 3D-CTBA result. All of the 22 cases ( 1 left S1, 1 right S3, 1 left S1 + 2, 1 left S1 + 2 + 3, 1 left S4 + 5, 1 right S6, 1 right S10, 1 left S10, 2 right S9 + 10, 3 left S9 + 10, 1 right S7 + 8 + 9 + 10, 8 left S7 + 8 + 9 + 10) were received thoracoscopic segmentectomy successfully. The mean procedure length was 76.6 ± 17.2min, and the intraoperative blood loss was 16.5 ± 2.8ml. The mean duration of chest tube insertion was 3.2 ± 0.7 days, and the mean hospital stay was 8.2 ± 2.8 days. Postoperative complications included infection (n = 1), atelectasis (n = 1), hydropneumothorax (n = 1) and pneumothorax (n = 1). No recurrence or mortality was observed during the short-term follow-up period of 3months. Based on the 3D-CTBA technique, the specific pulmonary segments invaded by the lesions and the relationship between the corresponding pulmonary vessels and bronchi can be acknowledged before the operation, which is of positive significance for the resection of complex pulmonary segments and good preoperative surgical planning. It's worth popularizing in the pediatric population.

Three-dimensional computed tomography angiography and bronchography combined with three-dimensional printing for thoracoscopic pulmonary segmentectomy in stage IA non-small cell lung cancer.

BackgroundCompared with lobectomy, the anatomical structure of the lung segment is relatively complex and easy to occur variation, thus it increases the difficulty and risk of precise segmentectomy. The application of three-dimensional computed tomography bronchography and angiography (3D-CTBA) combined with a three-dimensional printing (3D printing) model can ensure the safety of operation and simplify the surgical procedure to a certain extent. We aimed to estimate the value of 3D-CTBA and 3D printing in thoracoscopic precise pulmonary segmentectomy.MethodsWe retrospectively reviewed the clinical data of 65 patients who underwent anatomical segmentectomy at the Affiliated Hospital of Shaoxing University from January 2019 to August 2020. The patients were divided into two groups: a 3D-CTBA combined with 3D printing group (30 patients) and a general group (35 patients). The perioperative data of the two groups were compared.ResultsCompared with the general segmentectomy group at the same period in our center, the surgery time of the group guided by 3D-CTBA and 3D printing was significantly shorter. Intraoperative blood loss in the 3D-CTBA and 3D printing group was also apparently lower than in the general group. Hospital stay and postoperative chest tube duration showed no significant differences between the two groups, and neither did postoperative complications such as pneumonia, hemoptysis, arrhythmia, and pulmonary air leakage.Conclusions3D-CTBA combined with 3D printing clearly identifies the precise pulmonary segmental structures, avoids intraoperative accidental injury, reduces intraoperative blood loss, shortens the operation time and improves the safety of thoracoscopic pulmonary segmentectomy in stage IA non-small cell lung cancer (NSCLC).

Simple method for distinguishing the intersegmental plane in thoracoscopic lung segmentectomy.

Here, we introduce a simple method for delineating the intersegmental border in thoracoscopic pulmonary segmentectomy which can be widely reproduced because it is less time‐consuming, fault‐tolerant, and does not require any special chemical reagents or equipment. This method provides clear and accurate demarcation lines between the inflated and deflated lung parenchyma.Key pointsA method with an effective and simple application which can be popularized. This modified targeted bronchus inflation method provides a clear and accurate intersegmental plane.

Subxiphoid uniportal thoracoscopic pulmonary segmentectomy for stage I non-small cell lung cancer: Feasibility, quality of life and financial worthiness.

BackgroundSubxiphoid uniportal video‐assisted thoracoscopic surgery (SVATS) is more technically challenging than intercostal uniportal video‐assisted thoracoscopic surgery (UVATS), especially in more complex procedures such as segmentectomy. We therefore aimed to investigate the worthiness of undertaking the more demanding subxiphoid approach in patients who had undergone anatomical segmentectomy for stage IA non‐small cell lung cancer (NSCLC).MethodsA total of 491 patients were included in our study who had undergone anatomical segmentectomy for stage IA non‐small cell lung cancer from September 2014 to April 2018. They were divided into two groups; 278 patients in the UVATS group and 213 patients in the SVATS group. Different perioperative variables, postoperative pain, quality of life and cost were analyzed and compared between both groups.ResultsThe SVATS group showed a significantly longer operative time (P = 0.007) and more operative blood loss than the intercostal group (P = 0.004). There was no significant difference between both groups regarding postoperative drainage, duration of chest tube, postoperative hospital stay, operative conversion or postoperative complications. The SVATS group showed a significantly lower pain score postoperatively (P < 0.001). In addition, the SVATS group showed a significantly better postoperative quality of life score along the first postoperative year (P < 0.001). UVATS segmentectomy appeared to be significantly cheaper than SVATS segmentectomy (P < 0.001).ConclusionsSVATS segmentectomy for stage IA lung cancer is a safe procedure that is worth proceeding with as it is associated with better postoperative pain and better quality of life in the first postoperative year. Further studies are recommended to evaluate the actual cost‐effectiveness of SVATS segmentectomy.Key points• Significant findings of the study Subxiphoid uniportal approach for pulmonary segmentectomy is safe and feasible approach. It has better postoperative pain and better quality of life than the uniportal intercostal approach; however, it is more expensive. • What this study adds Subxiphoid uniportal approach for pulmonary segmentectomy gives a better quality of life in Chinese patients than the intercostal approach; however, it is more expensive.

Feasibility and effectiveness of thoracoscopic pulmonary segmentectomy for non-small cell lung cancer.

The outcomes of minimally invasive thoracoscopic pulmonary segmentectomy for non-small cell lung cancer (NSCLC) still need to be defined. This study aimed to investigate the feasibility and effectiveness of thoracoscopic pulmonary segmentectomy in patients with early peripheral NSCLC.This was a retrospective study of patients with early peripheral NSCLC admitted between January 2013 and January 2017. Patients were divided into the segmentectomy and lobectomy groups (40/group), according to the surgery they underwent. Blood loss, operation time, removal of drainage tube time, inflammatory response after operation, postoperative complications, postoperative lung function, local recurrence, and survival were compared.Blood loss and removal of drainage tube time were not significantly different between the 2 groups (all P > .05). Operation time in the segmentectomy group was longer than in the lobectomy group (P < .001). The postoperative interleukin-6, procalcitonin, and C-reactive protein changes in the segmentectomy group were significantly lower than in the lobectomy group (all P < .001). The pulmonary function at 2 weeks was significantly reduced in the 2 groups (all P < .001), but it was better in the segmentectomy group than in the lobectomy group (all P < .05). The 1- and 3-year local recurrence disease-free, and overall survival rates were not significantly different between the 2 groups (P > .05). The multivariable analysis could not identify any factor associated with local recurrence or survival (all P > .05).Thoracoscopic pulmonary segmentectomy and lobectomy are both acceptable for the treatment of early peripheral NSCLC, but segmentectomy was associated with lower postoperative inflammation and better postoperative pulmonary function than lobectomy.

Three-dimensional printing in the preoperative planning of thoracoscopic pulmonary segmentectomy.

The purpose of this study is to explore whether 3D printing has a better clinical value for making a preoperative plan than three-dimensional computed tomography (3D-CT) in thoracoscopic pulmonary segmentectomy. We collected a total of 124 patients' clinical data who underwent thoracoscopic pulmonary segmentectomy from October 2017 to August 2018. According to the preoperative examination, the patients were divided into three groups: general group, 3D-CT group, and 3D printing group. The clinical data of each group were analyzed and compared. Compared with the general group, intraoperative blood loss in 3D-CT group and 3D printing group decreased significantly (P<0.05). Operation time in 3D-CT group and 3D printing group was significantly shorter than in the general group (P<0.05). Between 3D-CT group and 3D printing group intraoperative blood loss and operation time had no significant differences (P>0.05). Postoperative chest tube duration and postoperative hospital stay had no significant differences between each group P>0.05). The incidence of postoperative hemoptysis in the general group occurred higher than in the 3D-CT group and 3D printing group, but the differences were not statistically significant (P>0.05). Postoperative complications of pneumonia, atelectasis, and pulmonary air leakage (>6 d) had no significant differences between each group (P>0.05). 3D printing and 3D-CT for making a preoperative plan have an equivalent effect in thoracoscopic pulmonary segmentectomy for experienced surgeons. Preoperative simulations using 3D printing for the assessment of pulmonary vessel and bronchi branching patterns is beneficial for the safe and efficient performance of thoracoscopic pulmonary segmentectomy.

Management of the inter-segmental plane using the "Combined Dimensional Reduction Method" is safe and viable in uniport video-assisted thoracoscopic pulmonary segmentectomy.

The management of the intersegmental plane (ISP) is challenging during uniport video-assisted thoracoscopic (VATS) pulmonary segmentectomy. Staplers and electrocautery have been used extensively in ISP management. However, both of them have their respective drawbacks. Currently, we have provided a revised technique termed as "Combined Dimensional Reduction Method" (CDR method), for managing the ISP with combined application of ultrasonic scalpel and staplers. The study aimed to review the outcomes of patients who underwent uniport VATS segmentectomy with or without the CDR method in our institute and assess the feasibility and safety of the CDR method. From March 2017 to February 2018, 220 patients who underwent uniport VATS segmentectomy were retrospectively reviewed. By using IQQA software, pulmonary structures were reconstructed as three-dimensional (3D) images, making the targeted structures could be identified preoperatively. For the management of the ISP, in the CDR group, we firstly used the ultrasonic scalpel to trim the 3D pulmonary structure along the intersegmental demarcation, making the remaining targeted parenchyma both sufficiently thin enough and located on a 2D plane; thus, enabling easy use of staplers in managing ISP. Whereas, in the non-CDR group, we only use the staplers to manage the ISPs. The clinical characteristics, complications, and postoperative pulmonary functions were compared between the two groups. Propensity score analysis generated 2 well-matched pairs of 71 patients in CDR and non-CDR groups. There was no 30-day postoperative death or readmission in either group. The CDR group was significantly associated with the shorter operative time (178.3±35.8 vs. 209.2±28.7 min) (P=0.031) and postoperative stay (4.5±2.3 vs. 5.7±4.2 days) (P=0.041), compared to the non-CDR group. Moreover, no significant difference was observed in blood loss, a period of chest tube drainage, a period of ultrafine tube drainage, and postoperative pulmonary complications between the two groups. Moreover, the recovery rate of postoperative forced expiratory volume in 1 second (FEV1) or vital capacity (VC) at 1 and 3 months after segmentectomy was comparable between them. The CDR method could make segmentectomy easier and more accurate, and therefore has the potential to be a viable and effective technique for uniport VATS pulmonary segmentectomy.

Combined virtual-assisted lung mapping (VAL-MAP) with CT-guided localization in thoracoscopic pulmonary segmentectomy

Virtual assisted lung mapping (VAL-MAP) is a bronchoscopic lung marking technique developed to assist in navigational lung resection. It can be used for nodule localization and segmental identification. This article presents our initial experience of thoracoscopic pulmonary segmentectomy using combined VAL-MAP and computed tomography (CT)-guided localization. Markings with India Ink were made bronchoscopically, before surgery, using a virtual bronchoscopy system (LungPoint® Planner) without fluoroscopy guidance. Post VAL-MAP CT scans localized the actual markings. All data on patients, markings, and outcomes were retrospectively collected, and the contribution of VAL-MAP to the operation was graded by the surgeon. From March 2017 to September 2017, 24 consecutive patients received the VAL-MAP marking procedure before thoracoscopic segmentectomy. Nineteen patients also received pre-operative CT-guided percutaneous localization after VAL-MAP; fifteen patients received CT-guided localization with dye (patent blue V) and microcoil, and four patients received with dye only. Of the 101 marking attempts made in all the patients, 71 (70.3%) were identified as contributing to the surgery. No clinically evident complications were associated with the procedure. A total of 24 segmentectomies were thoracoscopically conducted for 18 cases of lung cancer and six cases of benign diseases. The combination of VAL-MAP and CT-guided percutaneous localization contribute to precise thoracoscopic pulmonary segmentectomy.

Determination of the intersegmental plane using the slip-knot method.

Visualization of intersegmental planes in the lung is desirable for precise anatomical lung segmentectomy. We developed the slip-knot method for creating inflation-deflation lines. This study aimed to assess relevant data for thoracoscopic segmentectomy performed using this method. In the slip-knot method, the objective segmental bronchus is looped with a monofilament thread. One end of the thread is then pulled during temporary bilateral ventilation, causing the knot to slip toward the bronchus. Thereafter, bronchial ligation is tightened to block the outflow of segmental air, ensuring that the segment remains expanded while the other reserved segments collapse on resumption of unilateral ventilation. Data from 221 patients who underwent thoracoscopic pulmonary segmentectomy between 2010 and 2016 were analyzed. A total of 147 patients (67%) were indicated for the slip-knot method, and 74 cases (33%) were non-adaptive cases. Ninety six percent of 147 cases were well adapted to the slip-knot method, which allowed us to obtain good inflation-deflation line images to determine the intersegmental plane. The mean operative time was 171±51 min (range, 71-367 min). The mean duration of chest tube insertion was 1.5±1.2 days (range, 1-7 days). Three cases (2.0%) had prolonged air-leakage and one (0.7%) case had readmission for late air-leakage. Our method enables determination of anatomical intersegmental planes using only one monofilament thread, thus facilitating thoracoscopic pulmonary anatomical segmentectomy.

Intraoperative Computed Tomography Navigation During Thoracoscopic Segmentectomy for Small-sized Lung Tumors

Performance of thoracoscopic pulmonary segmentectomy for primary lung cancer or pulmonary metastases has recently increased. In patients with emphysema, identification of the intersegmental line is often difficult. For nonpalpable lesions, securing a sufficient surgical margin is more likely to be uncertain. The purpose of this study was to evaluate the efficacy of intraoperative computed tomography (CT) scan during video-assisted thoracoscopic surgery (VATS) pulmonary segmentectomy. This study included 12 patients who underwent intraoperative CT-assisted VATS segmentectomy between January 2015 and August 2016. After dividing the corresponding vessels and bronchi, the intersegmental line was marked by clipping, and intraoperative CT scan was performed under bilateral lung ventilation. The intraoperative CT or 3-dimensional CT reconstruction images were used by the surgeons to confirm the correct anatomical segmental border and to secure a sufficient resection margin. In all patients, the location of the lesions to be resected, the intersegmental border, and the surgical margins could be confirmed while performing VATS segmentectomy. Complete resection was achieved in all patients. Although the pathologic margins tended to be shorter than the surgical margins on intraoperative CT images, there was a strong correlation between these 2 variables (r = 0.963, P < 0.0001). Intraoperative CT scan during VATS segmentectomy was useful for identifying the location of nonpalpable lesions, confirming anatomical intersegmental borders and securing the resection margins. Intraoperative CT navigation could enable a more definitive VATS segmentectomy for nonpalpable lesions.