Third-order Depositional Sequences Research Articles

Facies and geochemical characteristics of the Middle-Lower Ordovician Yingshan Formation in the Tarim Basin, NW China: Implications for the high-frequency sequence stratigraphy in shallow-water carbonate platform

Shallow-water carbonates from the Yingshan Formation are important target of hydrocarbon exploration in Tarim Basin. Detailed descriptions of outcrop, core, and thin sections, isotopic composition analysis, and trace element analysis were conducted. Seven lithofacies which consists of two facies belt groups were identified and used to interpret deposition environments of Yingshan Formation: (1) peritidal carbonate, with relatively lower δ13C values from −4.2% to −1.9%, mainly represented by intertidal to supratidal facies and restricted subtidal facies and (2) open-marine subtidal carbonate, with higher δ13C values (−1.5% to −0.3%), mainly consists of shoal facies and interbank sea facies. On the basis of the lithology sets, four types of meter-scale cycle model (types A–D) were grouped into peritidal sequences and subtidal sequences. On the basis of vertical lithofacies, cycle stacking patterns, and accommodation variations in Fischer plots, two third-order depositional sequences (SQ1–SQ2) were recognized. The sequence boundary between SQ1 and SQ2 is not only a surface of a positive shift of δ13C values, but also the transitional zone of cycle stacking patterns. The sequences can be further divided into four fourth-order sequence sets: Sq1–Sq4. The lower sequences (Sq1–Sq2) are dominated by peritidal facies and characterized by a progressive decreasing in accommodation space probably indicates a longer-term fall in sea level. The upper sequences (Sq3–Sq4) are mainly dominated by subtidal facies and characterized by the accommodation space with a progressive increasement, likely indicates a rising sea level with a longer term. The facies-controlled reservoirs are mainly present in the Sq3, related to the sequence boundary between SQ1 and SQ2.

Stratigraphic-sedimentary evolution of a mixed siliciclastic-carbonate system in the Huizhou Sag of the Pearl River Mouth Basin, Northern South China Sea

Mixed siliciclastic-carbonate systems are regulated interactively by factors such as siliciclastic sediment supply, carbonate production, sea-level change, tectonism, and climate conditions. These systems record vital information that aids in understanding ancient environments. This study used a merged 3D seismic volume, in conjunction with over 100 industrial wells, to systematically investigate the stratigraphic-sedimentary evolution of such a system within the Huizhou Sag of the Pearl River Mouth Basin, located on the northern continental shelf of the South China Sea. In total, six major sequence boundaries were identified for the Zhujiang Formation within the area, thus subdividing the interval into five typical third-order depositional sequences. Each of these sequences can be divided into a transgressive and a highstand systems tract. Lowstand or falling stage systems tracts were also recognized, the deposition of which was potentially in response to the uplifting process of the Dongsha Rise. During the deposition of the Zhujiang Formation, the Huizhou Sag may have undergone a sequential evolutionary history from delta-shore, to delta-shore-tidal-lagoon, to delta-shore-carbonate, and finally to delta-shore-shallow marine systems. This evolution responded to a varying degree of mixing processes, which was mainly regulated by siliciclastic sediment supply, confined paleomorphology, and local oceanic currents. Furthermore, the deposition of the Zhujiang Formation in the Huizhou Area was time-equivalent with the spreading process after the ridge jump of the South China Sea (23–16.5 Ma), providing valuable insights into sea-level fluctuations, provenance changes, and tectonic evolution. Our results may also shed light on the evaluation of lithologic traps and hydrocarbon sweet spots within mixed siliciclastic-carbonate systems.

Depositional environment and sequence stratigraphy of the Qom Formation (Miocene) from the Ghalibaf section, Central Iran

The Miocene strata of the Qom Formation from the Ghalibaf section, Central Iran (NW Semnan) documented a high diversity of shallow-marine microfacies. These deposits in the Ghalibaf section, with a total thickness of 445 m, are characterized by twenty-one microfacies. The carbonate microfacies are deposited into five facies belts, including a lagoon, upper slope, lower slope, platform-margin sand shoals and margin facies. The presence of barrier reefs, intraclasts, oncoids, and grainstone aggregates, along with the absence of vast tidal flat areas, are distinguished. According to the aforementioned evidences, these sediments were deposited on a rimmed carbonate platform. In addition, the heterolithic calciturbidite deposits also show that the carbonate sequences were sedimented on a rimmed carbonate platform. Based on the available data of sequence stratigraphy analysis, seven third-order depositional sequences are bounded by type-1 and type-2 sequence boundaries. The relative sea-level changes between the upper and lower sequence boundaries in accord with the global sea-level curves reveal a reasonable correlation. However, some differences in other sequence boundaries might be due to local tectonic activities in the Qom Formation sedimentary basin, thereby leading to local sea-level changes. Moreover, biostratigraphic data based on the larger foraminifera index markers, including Praebullalveolina curdica, Borelis melo, Dendritina rangi, Meandropsina iranica, Elphidium sp. 14, Neorotalia viennoti, and Miogypsina sp. suggests the Miocene Shallow Benthic Zones, SBZ24-SBZ25 equivalent to the late Aquitanian-Burdigalian timespan.

Paleocene–Eocene boundary in the Gabal El-Gir, east Qena, Egypt: Paleoenvironment and sequence stratigraphy interpretations

Comprehensive field, litho-, biostratigraphy, and paleoenvironmental studies of the upper Paleocene–lower Eocene (P–E) boundary interval in the Gabal El-Gir area were conducted. Two selected sections El-Gir-1 and El-Gir-2 were investigated. The prevailed paleoenvironmental conditions were discussed in the frame of the nannofossils, planktonic, and benthic foraminiferal assemblages. Benthic foraminifera assemblages indicate a remarkable turnover across the PETM. The extinction of Angulogavelinella avnimelechi at the base of the PETM represents a significant marker for the base of the benthic foraminifera extinction event at this site and other neritic sites in the Tethyan region. The dominance of calcareous planktonic excursion taxa at the base of the PETM indicates adaptation to extremely warm sea surface temperatures and low nutrient levels. Also, our data suggests that the biotic responses to environmental change in the early Eocene resembled those observed in the early Eocene hyperthermals at the nearbay Dababiya and El-Ballas sections. This could indicate that similar processes characterized the Egyptian sedimentary basin during the early Eocene. Stratigraphically, despite the limited distance between the studied sections, the Dababiya Quarry Member (DQM) in El-Gir-1 resemble those of the Global Stratotype Section and Point (GSSP) but reduced in thickness. While in El-Gir-2, the lower part of the DQM was missing. These findings could indicate that the DQM was deposited in a submarine channel. Three third-order depositional sequences were recognized covering the P–E interval. The reconstructed sea level curve shows the presence of eustatic similarities with the global sea level.

Stratigraphic architecture of the Tethyan Cenomanian-Turonian succession and OAE2 in the Dokan Area, Kurdistan Region, northeast Iraq

This study provides a detailed examination of a condensed Cenomanian-Turonian (C-T) succession of two sections (Dokan Dam and Khalakan) in the Kurdistan Region, Northeastern Iraq, based on biostratigraphy (calcareous nannofossils and planktic foraminifera), carbon and oxygen isotope geochemistry, and facies analysis. The C/T boundary in this region is characterized by a hiatus noticeable due to the absence of the Globigerinelloides benthonensis and Dicarinella hagni subzones and the lack of positive carbon isotope excursion (CIE) peak b during the Oceanic Anoxic Event 2 (OAE2). Positive CIEs in our studied succession include three peaks (a, c, and d) from the four established positive global CIE peaks (a, b, c, and d). Peak a is recognized at the upper part of the Cenomanian Dokan Formation, while peak b is missing within the hiatus across the C/T boundary. Peak c is found within the lowest Turonian above the Gulneri/Dokan formational boundary, and peak d appears at the base of the middle Turonian Kometan Formation. Twelve microfacies and four submicrofacies types are identified and grouped by depositional paleoenvironments into five facies associations, ranging from peritidal to basinal settings. Three incomplete third-order depositional sequences (DSs) and their transgressive-regressive cyclic stacking pattern have been identified in the Cenomanian-Turonian succession studied herein. These DSs are associated with hiatuses, suggesting tectonic control combined with a global sea-level fall. Hiatuses and extreme condensation recorded in the latest Cenomanian-early Turonian successions on many Neo-Tethys platforms resulted from platform exposure, subsequent drowning, and a warming climate.

The Upper Jurassic sediments, Marib-Shabwa Basin, Yemen: Lithofacies aspects and sequence stratigraphic analysis

The present study is devoted to understanding the evolution of the Upper Jurassic Sab'atayn Formation in the Marib-Shabwa Basin, Yemen, through a sequence stratigraphic analysis based on integrating datasets of sedimentology, seismic sections, and well logs. The Sab'atayn Formation (Tithonian age) is represented by a series of clastic and evaporites that were deposited under fluvio-deltaic to prodeltaic settings. It is divided into four members including Yah (at the base), upwards to Seen, Alif, and Safir at the top. Two third-order depositional sequences were determined for the Tithonian succession which were separated by three sequence boundaries. These sequences were classified into their systems tracts signifying several sedimentation patterns of progradational, aggradational, and retrogradational parasequence sets. The first depositional sequence corresponds to the early-middle Tithonian Yah and Seen units that can be classified into lowstand, transgressive, and highstand systems tracts. The second sequence comprises the late Tithonian Alif unit that can be subdivided into transgressive and highstand systems tracts. The sandy deposits of the Alif Member (highstand deposits) represent the most productive hydrocarbon reservoir in the basin. The Upper Jurassic sediments in the study area were resulted from a combination of eustatic and tectonic effects.

Depositional and diagenetic controls on reservoir properties along the shallow-marine carbonates of the Sarvak Formation, Zagros Basin: Petrographic, petrophysical, and geochemical evidence

As the second important oil reservoir of Iran, shallow-marine carbonates of the Sarvak Formation were deposited in a tectonically active setting, under a warm and humid paleoclimatic condition. This study focuses on sedimentological, geochemical, and petrophysical analysis of this formation in the Abadan Plain, Zagros Basin. Petrographic studies have resulted in the recognition of five microfacies deposited in lagoon, patch-reefs and their taluses, shoal, and open marine environments. They represent a ramp-like depositional model for the Sarvak Formation. Two third-order depositional sequences are differentiated and dated as Cenomanian–Turonian, according to the results of biostratigraphic analysis. Effects of intensive meteoric diagenesis are recorded beneath the two paleoexposure surfaces (Cenomanian–Turonian boundary, and middle Turonian). They include pervasive dissolution (karstification), collapsed brecciation, silicification, recrystallization, and development of paleosols. Additionally, decreased values of δ18Ocarb and δ13Ccarb and a sharp inverted-J pattern in the δ18Ocarb vs. δ13Ccarb cross plot indicate major meteoric phases. The most decreased values of δ18Ocarb (−7 ‰) and δ13Ccarb (−8.6 ‰) are measured from the meteoric cements and paleosols. Reservoir quality evaluation revealed that the best reservoir zones of the Sarvak Formation are developed within the rudist-dominated facies with intensive meteoric dissolution. They are concentrated within the regressive systems tract of the Cenomanian sequence. Fractured and dolomitized mud-dominated facies provided the speed/baffle zones in transgressive systems tracts, and highly compacted/cemented facies formed the barrier units. It could be concluded that the facies characteristics and meteoric diagenetic processes had major controls on reservoir quality of the Sarvak Formation, in the Abadan Plain. These controlling factors are predictable in a high-resolution sequence stratigraphic framework.

Litho-, biostratigraphy and sedimentological framework of the ‘mid’-Cretaceous crinoid-rich facies of the southern Aures Range (eastern Algeria)

Field description and laboratory analysis of a nicely documented section exposing ‘mid’-Cretaceous fossiliferous deposits led to the first litho- and biostratigraphic frame for the southern part of the Aures Range (eastern Algeria) presented herein. Its median geographical position between the Sahara and the Tell domain provided us with biostratigraphical data (ammonites, associated macrofossils and microfaunas) to draw interesting insights for regional correlations, and with valuable ambient indices for a better palaeoenvironmental reconstitution along the South Tethysian margin. The investigated strata, ranging from the upper Albian to the lowermost Turonian, consist of the following formations: the Tighanimine Formation, the Arris Formation (lower and upper members) and the Adhari Formation (lower and upper members). The collected faunas allow the recognition of a mixed upper middle to lower upper Albian assemblage and three distinctive Cenomanian ammonite biozones (Mantelliceras mantelli, Acanthoceras rhotomagense and Neolobites vibrayeanus zones). Microscopic analysis had resulted in the recognition of ten microfacies types (MT 1 to MT 10) that are described in terms of depositional environments and grouped into three main facies types: (i) deep-water outer platform and toe-of-slope/distal slope facies zone, (ii) shallow subtidal, open-marine/restricted, mid-inner platform facies zone and (iii) deep-water basin, pelagic facies zone. Microfacies analysis was used to provide valuable data for marine setting reconstruction and correlation to adjacent areas. Sequential stratigraphy analysis led to distinguishing four third-order depositional sequences grouped into two mega-sequences (I and II) and correlated to the standard sea-level chart.

Paleoenvironment, sequence stratigraphy, and sea level change in the upper Maastrichtian–Danian boundary interval in Gabal Aras, east Qena, Nile Valley, Egypt

The Cretaceous–Paleogene (K–Pg) boundary interval at Gabal Aras, Qena region (part of the southern Tethyan margin) was investigated in detail for calcareous nannofossil and foraminiferal (planktonic and benthonic) assemblages to characterize the surface and bottom sea water conditions. The K–Pg boundary is marked by a minor hiatus expressed by the absence of the lowermost Danian P0 and Pα planktonic foraminiferal zones. Benthonic foraminifera assemblages indicate moderately oxygenated bottom sea waters associated with oligo-mesotrophic conditions during early late Maastrichtian, and mesotrophic conditions during the latest Maastrichtian. The benthonic foraminiferal assemblage reflects a decrease in the food supply in the bottom sea water during the early Danian, while well-oxygenated and oligotrophic conditions dominated during late Danian. The late Maastrichtian surface water witnessed a general cooling trend that was interrupted by a warming episode that could correspond to the Late Maastrichtian Warming Event (LMWE). Acme of Thoracosphaera associated with increased abundance of Neobiscutum romeinii were observed within the upper part of NP1 Zone indicating stressful surface water conditions. The increase of the epifaunal foraminiferal taxa and the occurrence of Cruciplacolithus primus throughout NP2 and NP3 zones reflect a progressive return to normal marine conditions. In the framework of sequence stratigraphy, two third-order depositional sequences covering the K–Pg boundary interval were identified, interpreted, and correlated. The obtained sea-level curve was evaluated to assess whether it was controlled by the eustatic sea-level changes, regional tectonics, or both these factors.

Seismic sequence stratigraphy and depositional modelling of the Lower Fahliyan Formation in the northwestern Persian Gulf, SW Iran

This study presents seismic stratigraphic-based sedimentary conceptual modelling through the integration of well data, seismic data, and literature in order to identify the architecture of the Berriasian-Early Valanginian Lower Fahliyan Formation in the northwestern Persian Gulf. The applied methodology is configured by interpreting seismic sections in terms of sequence stratigraphy and adapting them using well data facies associations and fossil assemblages. The time framework of these sediments is identified by their faunal/flora assemblage and extrapolated by seismic data because of their extensive coverage. Three third-order depositional sequences (DS-I, DS-II, and DS-III) were distinguished based on the facies changes, depositional geometries, and fossil assemblages. Regional and local tectonic activities and global sea-level changes controlled the sedimentation of the depositional sequences. The local tectonic activities were of higher importance as they strongly affected the thickness and facies type of the studied interval. The depositional sequences of the Lower Fahliyan Formation are deposited in the inner to outer settings of a carbonate shelf. It was concluded that DS-I and DS-II over the platform (Surmeh Platform), consisting of progradational parasequences, deposited during the highstand phase in shoal settings that due to primary texture and subsequent diagenetic imprints yield the best reservoir quality. The relationship of the parasequences with good reservoir quality was determined on seismic sections and the prepared regional correlation panel over the study area. Furthermore, the paleoenvironmentof the area was constructed and modelled for major stratal surfaces (Sequence boundaries and maximum flooding surfaces). According to the generated models, the distal setting (Garau Basin) migrated back gradually northward during the Berriasian-Early Valanginian so that it was completely replaced by a homoclinal ramp at the end of the DS-III deposition. Subsequently, the relief of Surmeh Platform was also flattened and it was recognized as the end of the first phase of the basin's activity.

Integration of geoscience data to delineate quality of the Asmari reservoir, Iranian part of the Persian Gulf basin

The Hendijan Field is an asymmetric structure located in the northwestern Persian Gulf and consists of several oil and gas-bearing intervals. Oligocene to Miocene successions in the field host large volumes of hydrocarbons. The Asmari Formation comprises the mixed siliciclastic and carbonate members formed in a shallow marine carbonate ramp depositional environment. The siliciclastic part displays the best reservoir quality within the Asmari Formation. Through petrophysical, sedimentological, and geophysical analysis, this study divides the Asmari Formation into six, third-order depositional sequences. By doing so, it clarifies the relationships between depositional sequences and reservoir characteristics, particularly porosity and water saturation. Detailed petrographical analysis, core description, well log analysis, and seismic interpretation distinguish eight microfacies, two petrofacies, and six third-order sequences within the Asmari Formation. 3D reservoir-property models are developed that incorporate elements of the sequence stratigraphical framework. Within the six identified sequences, high reservoir quality zones are associated with AS-4 and AS-5, which comprise mostly grain-supported lithologies associated with shoal facies. The supratidal, intertidal, and lagoonal facies of AS-2, which are often associated with the occurrence of anhydrite and mud-supported fabrics, reflect lower reservoir quality. Hydraulic flow units (HFU) are delineated to assist in characterizing reservoir heterogeneity and porosity/permeability prediction. Five HFU were identified by applying the flow-zone-indicator method to evaluate reservoir quality. Both the transgressive system tract (TST) of AS-2 and early TST plus late highstand system tract (HST) of AS-6 contain elements of HFU-A. The most productive units of AS-4 and AS-5 belong to HFU-E.

Palaeobiogeography, palaeoecology, and sequence stratigraphy of the Upper Jurassic carbonate succession of the Lar Formation, central Alborz Zone, Iran

Foraminifera, ammonites, and calcareous dinoflagellates were used for stratigraphy and, together with microfacies, for the assessment of the palaeoenvironmental conditions of the Upper Jurassic deposits in the central Alborz Zone of northern Iran. The Lar Formation (Lar Fm.) in the Polur section is of latest Oxfordian to early Kimmeridgian age. The ammonite Subnebrodites planula and the calcareous dinoflagellate Colomisphaera nagyi have been introduced as new biomarkers of the lower Kimmeridgian in the central Neo-Tethys. The distribution of calcareous dinoflagellates reflects possible dispersal routes along a narrow seaway between the western Neo-Tethys and the Alborz Zone in the central Neo-Tethys. The Terebella-Crescentiella associations of the Lar Fm. represent a low-energy setting under dysoxic conditions in the Central Neo-Tethys Ocean. The benthic foraminiferal assemblages in this formation show a high dominance of infaunal taxa and r-selected strategists. This assemblage is reminiscent of eutrophic conditions and low oxygen levels in the lower part of the Lar Fm. Good preservation of the hexactinellid sponges in the upper part of the Lar Fm. also indicates an oxygen-minimum zone. Three third-order depositional sequences can be distinguished in the study area based on six microfacies. Depositional sequence 1 (DS1) is composed mainly of argillaceous limestone and medium- to thick-bedded limestone, corresponding to an outer ramp-to-middle ramp environment. Depositional sequence 2 (DS2) comprises breccia limestone and thick-bedded limestone facies in its lower part and thin-bedded limestone to massive limestone in its upper part. The breccia limestone facies may be associated with subaerial exposure and reworking of previously deposited sediment during a relative sea level fall. The thin-bedded limestone to massive limestone of DS2 consists mainly of bioclastic mudstone to wackestone (outer ramp). These represent an deep-water outer homoclinal ramp facies. Depositional sequence 3 (DS3) consists mainly of massive limestone to thick-bedded limestone with a bioclastic peloidal microbial Crescentiella packstone (middle ramp). The relative stratigraphic positions of DSs1–3 and sequence boundaries in the uppermost Oxfordian to lower Kimmeridgian of the Polur area show a fair match to the upper Oxfordian to lower Kimmeridgian sequences (JOx7, JOx8, JKi1 and JKi2) on the global sea level curve.

Tracking depositional and geochemical variations in the Cambrian North China Platform: Insights from sedimentology, geochemistry, and C-O isotopic records

The Cambrian carbonate sequence in North China is of significant global and regional scientific importance due to its continuous and thick exposure and the data on the major environmental changes and biological events of the early Phanerozoic, which can be gleaned from it. While the well-exposed Cambrian outcrops have been utilized to unravel the processes governing these events, few studies have focused on the outcrops' spatio-temporal depositional patterns and geochemical variations. Therefore, our study address, these issues by integrating fieldwork with petrographic and geochemical analyses. In the North China Platform (NCP), the Cambrian carbonate sequence is predominantly composed of six third-order depositional sequences (~370–400 m thick) that can be divided into nine microfacies, representing three primary microfacies associations, namely tidal flat, lagoon, and shoal. In contrast to the standard carbonate sequence stratigraphy model and many other examples of Cambrian platforms, the deposition of oolitic grainstones in the NCP are overlain by the deep-water calcareous mudstone and shale during a period of slow fall of sea-levels. Such a particular style shows a similar trend to the Schlager model of a type III sequence boundary that formed between a highstand systems tract (HST) and a transgressive system tract (TST). Scanning electron microscope (SEM) observations show an abundance of microbial fossils, a nanosphere, and remnants of extracellular polymeric substances (EPS) inside the dark micrite of normal regressive deposits (oolitic grainstone), suggesting the significant role of microbial activity in the formation of ooids. The δ18O isotopic values range from −4.15 to −11.75‰ VPDB, portraying pervasive diagenetic alterations with a variable degree of diagenesis at different localities, and both marine- and burial-related diagenesis. In contrast, the δ13C VPDB values have a very narrow range, from −2 to +2‰ VPDB, suggesting little to no influence of meteoric diagenesis. At the same time, the slight depletion of δ13C isotope values may reflect the role of microbial processes during the genesis of ooids. This study highlights the importance of microbial activity and marine-related diagenetic overprints during the formation of carbonate facies in the Cambrian Period and provides evidence that carbon isotopic excursions observed during different major environmental and biological events in the NCP are related to primary signals and not altered by intensive meteoric diagenesis.

Palynostratigraphy and paleoenvironments of the upper Turonian–lower Campanian Abderaz Formation in the east of Kopet-Dagh Basin (NE Iran)

The palynology and palynofacies of the Abderaz Formation have been studied to interpret the paleoenvironments and sea-level changes in the Upper Cretaceous deposits of the Kopet-Dagh Basin. This formation in the Kalat-e-Naderi region (Gharesu section) is composed of 462 m of gray to cream shales, marlstone layers and three chalky limestone units. Seven dinoflagellate cyst (dinocysts) and four planktonic foraminiferal biozones have been identified in the studied succession, which suggest a late Turonian–early Campanian age for this interval. Four different depositional environments have been recognized in the studied section based on the relative proportion of organic matter (terrestrial organic matter, marine palynomorphs and amorphous organic matter). High abundance of marine palynomorphs in most samples indicates the predominance of an oxygenated distal shelf environment in the upper Turonian–lower Campanian interval. Seven third-order depositional sequences are proposed for the Abderaz Formation. A good correlation of sequence boundaries with the global sea-level fall events suggests that eustasy played an important role during the deposition of the Abderaz Formation.

Sequence stratigraphy of the ca 1640 Ma Barney Creek Formation, McArthur Basin, Australia

The ca 1640 Ma Barney Creek Formation is a mostly fine-grained silicicastic unit of the McArthur Group in the southern McArthur Basin of northern Australia. It is one of the most prospective units for clastic-dominated (CD-type) Zn–Pb deposits in the world, hosting the giant McArthur River Zn–Pb–Ag and the Teena Zn–Pb deposits. The Barney Creek Formation records deposition of dominantly dolomitic siltstone turbidite facies at or below storm wave base. These strata were deposited in a series of sub-basins and on submerged paleohighs that formed in response to roughly north–south extension during early Barney Creek times. A detailed, regional-scale sequence stratigraphic analysis based on 20 wells indicates that the middle McArthur Group (Emmerugga Dolostone to Lynott Formation) comprises six third-order depositional sequences, of which the Barney Creek Formation includes two (named B1 and B2). These two sequences and the overlying sequence L1 (Reward Dolostone and lower Lynott Formation) record significant lateral facies and thickness changes across the southern McArthur Basin. These variations can be explained by a geographical shift in the depocentre during structural re-organisation of the basin. The depocentre migrated from the south, where accommodation was mostly created during deposition of sequence B1, towards the north during deposition of sequence B2. KEY POINTS Sequence stratigraphic analysis of the Barney Creek Formation on a regional scale based on 20 wells. Barney Creek Formation includes two third-order depositional sequences (named B1 and B2), which record significant lateral thickness and facies shifts. Thickness and facies shifts can be explained by geographical shift of depocentre from the present-day south to north.

Sequence Stratigraphic Evaluation of Sediments Domicile in Day Field Located in the Onshore Central Swamp Depobelt of the Niger Delta, Nigeria

This study employs the tool of sequence stratigraphy to evaluate Day Field, in the Onshore Niger Delta of Nigeria for hydrocarbon predictions using six (6) well logs displayed at standard scales to enhance log trends for lithologic and stratal package delineation. The identified key stratigraphic bounding surfaces were tied to well-defined palynological (P) zone and foraminiferal (F) zones with the aid of the biostratigraphic data and calibrated using the Niger Delta Chronostratigraphic chart. Five (5) MFSs (34.0, 33.0, 31.3, 28.1, and 26.2 Ma) and six (6) SBs (35.4, 33.3, 32.4, 29.3, 27.3, and 24.9 Ma) were delineated. The stratigraphic surfaces were matched with the palynological (P480– P580) and foraminiferal zones (P20/N1–P22/N3) encountered. The results indicate that the study area is of Late Eocene to Late Oligocene age (26.2–35.9 Ma). The key stratigraphic surfaces also reflect a series of relative sea-level falls (regressive episodes) and sea-level rises (transgressive episodes) that are regionally extensive and correlated across the wells. Five sequences (SEQ1–SEQ5) were recognized, SEQ1 and SEQ5 comprising three system tracts (LST, TST, and HST) revealing four third-order depositional sequences (classified as type 1 sequence), while SEQ2-SEQ4 comprises two system tracts (TST and HST). Two depositional environments were interpreted from the log trends; the Fluvial (shoreface) and Tidal environments. The hydrocarbon exploration prospects identified are the sand units of the LST and HST combining with the shale units of the TST offering good reservoir and seal/source rocks respectively.

Predicting sequence stratigraphic architecture and its implication for hydrocarbon reservoir potential of the uppermost Silurian through Lower Devonian Winduck Interval, central Darling Basin of western New South Wales, SE Australia

This paper provides the results of lithostratigraphy and depositional environment of the uppermost Silurian through Lower Devonian Winduck Interval section from three areas widely distributed in the central Bancannia Trough from Bancannia South 1 well, the southern Pondie Range Sub-basin from Pondie Range 1 well and the northwestern part of the Blantyre Sub-basin from two wells, the Booligal Creek 1 and 2. These wells were studied using wireline log, core and cutting data to predict sequence stratigraphic architecture and its implication for hydrocarbon sandstone reservoir potential. This study necessitated the use of detailed facies prediction relationships and geometry of lithostratigraphic concepts for the purpose of establishing a sequence stratigraphic architecture framework of the studied areas. Two units were established, lower and upper Winduck Interval, within the Winduck Interval identified by lithological data examination and wireline log characteristics of the sediments from the four wells in the study area. Results of the lithology type analysis showed that the Winduck Interval is interbedded richly in sandstone and siltstone complex deposits. This paper presents a clear picture of the sequence stratigraphic model, as well as that of the three third-order depositional sequences (DS1, DS2 and DS3, respectively) that are identified from changes in systems tracts patterns (composed of lowstand, transgressive and highstand), vertical and lateral facies sequence thickness changes and the lithostratigraphic units distribution in the Winduck Interval section. Potential reservoir prospectivity targets are identified in lowstand system tracts and highstand system tracts deposits consisting of sandstone facies and thin silts, while the transgressive system tracts deposits consist of shales and some interbedded shaly siltstones, many having excellent potential source and seal properties. The contribution of sequence stratigraphy as an approach to understanding lithostratigraphy of the Winduck Interval has important significance in regard to future hydrocarbon reservoirs exploration across the central Darling Basin.

Understanding along-strike variability in controlling mechanisms of paleoenvironmental conditions and stratigraphic architecture: Ordovician successions in the Alborz Mountains of Iran at the northern Gondwana margin

Changes in stacking patterns of facies, stratal architecture and shoreline trajectory along depositional strike are mainly dependent on along-strike differences in factors such as physical processes (rivers, waves, tides), tectonics, eustatic changes, sediment supply, and local physiography. The lower-upper Ordovician successions (Lashkerak Formation) deposited in a Peri-Gondwana shallow continental shelf have been interpreted using the sequence stratigraphic concepts. This approach allowed to highlight main differences along-strike in the co-existing depositional systems (coastal plains, estuaries, deltas, and shoreline to shelf systems) in the Alborz basin along the northern edge of Gondwana. On the basis of sedimentary and ichnological characteristics, the siliciclastic successions are divided into four facies associations: (i) Wave-dominated estuarine, (ii) Wave-dominated shoreface-offshore complex, (iii) Mixed fluvial (F)- and wave (W)-influenced delta (Fw and Wf), and (iv) Tide-dominated, fluvial-influenced delta (Tf). Six third-order depositional sequences (DS1-DS6) were recognized, each of them are bounded by unconformities and pronounced shifts in the facies. Along depositional strike (NE/SW- a distance of c. 150 km), significant intrabasinal changes in sediment supply produced evident lateral changes in the shoreline trajectory and stratal architecture, of the DS1-DS3 (Tremadocian-Floian), may be attributed to differences in physical processes (rivers, waves, tides activity) and topographic irregularities derive probably by different rates of subsidence in the basin. During the deposition of the DS1-DS3, a significant along-strike differences in the composition of ichnological suites and the lifestyle of benthonic organisms, dependent on the relative supremacy of wave, storm, river, and tidal processes. Sedimentary supply and processes are the main controlling factors for the stratigraphic architecture rather than the tectonic activity between Tremadocian and Floian. While during the Darriwilian-Katian interval (DS4-DS6), the tectonic activity predominates with the beginning of extensional phases related to the rifting in the Alborz basin causing the activation of syn-depositional normal faults and the development of block-faulted craton-ward margin. Typically, differential subsidence due to extensional tectonic activity causes the uplift of tectonic blocks west of the Alborz Basin into the emerging areas, on one hand, and simultaneous deepening-upward stacking patterns (i.e., increased subsidence rates) in the hanging-wall depocenters of east of the Alborz Basin, on the other hand. This outcrop-based study suggests that the identification of genetically related depositional units in a larger paleogeographic context is fundamental for understanding along-strike variability in controlling mechanisms of the spatial distribution and stratigraphic architecture of coexisting and linked depositional systems.

The controlling factors of the spatio-temporal distribution of the upper Barremian to the upper Albian sedimentary succession in the Zagros folded belt, SW Iran

• Initiation of the Kazhdumi intrashelf basin started during the late Barremian . • Drowning of the Dariyan carbonate platform happened in the latest early Aptian . • Paleohighs re-activation evidenced from the early Aptian time. • More exploration potential expects in the Aptian-Albian sediments of Dezful Embayment. • Stratigraphic traps are predicted in the upper Barremian to the upper Albian sedimentary succession. The current study highlights the controlling factors of the spatio-temporal distribution of the upper Barremian to the upper Albian sedimentary succession which comprises a petroleum system in the Zagros folded belt, SW Iran. Combination of field surveys, seismic data (2D and 3D lines), cores and petrographic investigations, wireline logs, paleologs, as well as sequence stratigraphy analysis led to identification of four third-order depositional sequences. Sequence stratigraphy analysis delineates interaction of several factors in which controlled the spatio-temporal distribution of lithofacies. Interaction of an inherited paleotopography, regional tectonic activity together with reactivation of paleohighs, sea level fluctuations, climatic changes, and siliciclastic influx accompanied by nutrient levels played dominant role. Creation of the Kazhdumi intrashelf basin started during the late Barremian in the Dezful Embayment, which is much older than previously thought the late early Aptian. From petroleum geology point of view, our findings are expected to bring more opportunities for hydrocarbon exploration and production in the upper Barremian to the upper Albian deposits in the Dezful Embayment and Abadan Plain. Lateral and vertical lithological changes together with clinoform geometries and progradation associated with forced regressive wedges have provided suitable conditions for stratigraphic traps/plays in the study area.

Geophysical 3D-static reservoir and basin modeling of a Jurassic estuarine system (JG-Oilfield, Abu Gharadig basin, Egypt)

• The estuarine architecture is just depicted via facies-constrained 3D modeling. • Heterogeneity of Khatatba complex reveals five sedimentary facies associations. • Basin modeling confirms hydrocarbon charging from Khatatba shales to reservoirs. • Bars comparison with modern-ancient analogues verifies sufficient characteristics. • Given best reservoir quality, estuarine bars deserve testing in similar settings. Inadequate delineation of reservoir-heterogeneities, along with charge-timing confirmation, can considerably mislead exploration-development phases of petroleum. Therefore, precisely depicting the reservoir-architecture is crucial for avoiding exploration failures. To this end, integrated approach of various facies analysis and modeling-related disciplines; e.g. seismic facies, and GR-log motifs; was applied, in this study, to develop a depositional-model capable of aiding in stochastically-mapping reservoir heterogeneity and quality of the Jurassic estuarine depositional-system at JG-Field. To overcome the issue of sparse well control and scarcity of promising discoveries from deep-buried intervals in the study area, stochastic 3D-geocellular reservoir modeling, constrained by seismic attribute analysis, was performed to render a lateral prediction of different facies constituting the Jurassic succession. Predicting organic maturities and retrieving past geologic processes controlled sedimentary basin evolution were also a matter of importance to confirm hydrocarbon-charging to reservoir intervals. Accordingly, 1D-basin model was established so as to complete the story of petroleum system analysis in the area. We utilized dataset of seismic, log, core, and thin-section data; and applied both object-based and pixel-based, SIS (Sequential Indicator-Simulation) and SGS (Sequential Gaussian-Simulation), stochastic modeling algorithms upon simulating rock and fluid properties. The results show that the Jurassic succession constitutes a third-order depositional sequence of fluvio-estuarine units, subdivided into five sedimentary facies-associations. Fluvial and tidal-bar facies associations enrich medium-grained sandstones, deposited in subaerial and subaqueous conditions respectively, featuring significant reservoir quality. Given best reservoir-quality, and considerable thickness, the tidal sand-bars ought to catch attention of future development strategies and be considered for investigation in similar settings.