Bulk Heterojunction Thin Films Research Articles

Low-donor content approach to achieve sensitive narrowband organic photodetectors

Narrowband near-infrared (NIR) detectors are key components for various modern biomedical, agricultural, astronomical sensing as well as monitoring applications. Typically, a narrowband organic photodetector (OPD) requires thick junctions or additional optical elements, which are either tedious or cost-ineffective. Here, we adopt the low-donor content strategy in our thin-film device to realize narrowband spectral features. The much-mitigated aggregation drastically improves shunt resistance and dark current while maintaining decent photocurrent. Upon further dilution, a thinner electron transporting layer can effectively shorten the transient response to reach fast speed. n-i-p and p-i-n device configurations are also compared, which exhibits drastic changes for low-donor content OPDs. The 5 wt% D:A thin-film bulk-heterojunction OPD presents an external quantum efficiency of 49.3% at 770 nm with zero bias, and a high thermal-noise calculated specific detectivity (D*) of 1.0 × 1013 Jones (7.1 × 1012 Jones based on noise spectral density) at 0 V. Such narrowband OPD also shows a fast NIR response of 530 ns/840 ns (rise/fall) when operated at 10 kHz. The results reveal the potential for low-donor-content blend in realizing narrowband photodetection.

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT:PCBM-based organic solar cells

Thermal annealing alters the morphology of organic donor-acceptor bulk-heterojunction thin films used in organic solar cells. Here, we studied the influence of thermal annealing on blends of amorphous regio-random (RRa) and semi-crystalline regio-regular (RR) poly (3-hexylthiophene) (P3HT) and the fullerene derivative [6,6]-phenyl-C60-butyric acid methyl ester. Since the P3HT:PCBM blend is one of the most studied in the OPV community, the existing research provides a solid foundation for us to compare and benchmark our innovative characterization techniques that have been previously under-utilized to investigate bulk heterojunction organic thin films. Here, we combine advanced novel microscopies and spectroscopies, including polarized light microscopy, photo-deflection spectroscopy, hyperspectral photoluminescence imaging, and energy resolved-electrochemical impedance spectroscopy, with structural characterization techniques, including grazing-incidence wide-angle x-ray scattering, grazing-incidence x-ray diffraction, and Raman spectroscopy, in order to reveal the impact of thermal annealing on the microstructural crystallinity and morphology of the photoactive layer in organic solar cells. Coupled transfer matrix and drift-diffusion simulations were used to study the impact of the density of states on the solar cells’ device performance parameters, namely the short-circuit current (J SC), open circuit voltage (V OC), fill factor (FF), and power conversion efficiency (PCE).

Fast-Growth Polymer: Fullerene Bulk-Heterojunction Thin Films for Efficient Organic Photovoltaics.

The bulk-heterojunction (BHJ) system that uses a π-conjugated polymer as an electron donor, and a fullerene derivative as an electron acceptor, is widely used in organic solar cells (OSCs) to facilitate efficient charge separation and extraction. However, the conventional BHJ system still suffers from unwanted phase segregation caused by the existence of significant differences in surface energy between the two BHJ components and the charge extraction layer during film formation. In the present work, we demonstrate a sophisticated control of fast film-growth kinetics that can be used to achieve a uniform distribution of donor and acceptor materials in the BHJ layer of OSCs without undesirable phase separation. Our approach involves depositing the BHJ solution onto a spinning substrate, thus inducing rapid evaporation of the solvent during BHJ film formation. The fast-growth process prevents the fullerene derivative from migrating toward the charge extraction layer, thereby enabling a homogeneous distribution of the fullerene derivative within the BHJ film. The OSCs based on the fast-growth BHJ thin film are found to exhibit substantial increases in JSC, fill factor, and a PCE up to 11.27 mA/cm2, 66%, and 4.68%, respectively; this last value represents a remarkable 17% increase in PCE compared to that of conventional OSCs.

Self-powered solution-processed photodetectors utilizing FAPbBr3:C60 bulk heterojunction

Hybrid halide perovskites have emerged as pivotal optoelectronic materials due to their easy and cost-effective solution-based manufacturing processes. In this study, we have combined formamidinium lead bromide (FAPbBr3) with buckminsterfullerene (C60) to create the bulk heterojunction (BHJ) photoactive layer for solution-processed photodetectors. Remarkably, the FAPbBr3:C60 BHJ-based photodetectors exhibited a substantial enhancement in optoelectronic performance, with the responsivity increasing from 0.87 A/W to 1.47 A/W compared to the pristine FAPbBr3. This improvement can be attributed to the superior surface morphology and crystallinity of the FAPbBr3:C60 BHJ thin film, which facilitated enhanced charge transport properties. Furthermore, the fabricated photodetectors demonstrated remarkable detectivity even at 0V, enabling self-powered operation. By employing the space charge limited conduction (SCLC) model, we were able to elucidate the dominant charge transport mechanism. At lower voltages, trap-free SCLC was identified as the primary mechanism, while traps governed charge transport at higher voltages. Additionally, we conducted impedance analysis to investigate the underlying factors contributing to the distinctive optoelectronic performance observed in the photodetectors.

Perovskite-ICBA bulk-heterojunction thin films by slot die method: effect of microemulsion composition

Perovskite-ICBA bulk-heterojunction thin films by slot die method: effect of microemulsion composition

Impact of Alkyl-Based Side Chains in Conjugated Materials for Bulk Heterojunction Organic Photovoltaic Cells—A Review

The research for efficient organic materials organized in bulk heterojunction (BHJ) thin films for organic photovoltaics (OPVs) has shown a significant breakthrough in the past decade. Desired structural organization can be attained through various strategies. In this regard, the current review highlights tuning of alkyl chains introduced on molecular structures of active materials. The recent wide literature is classified based on the introduction of alkyl chains on polymers and small molecules used as donor and acceptor materials. The design of these materials, the morphological aspects of the active layers, and the performances of the related photovoltaic cells are detailed. A comprehensive discussion on chemical structures of the different material families considered, their modification by alkyl chains of various natures, and the morphological aspects are reported and tabulated.

Interactions between nonfullerene acceptors lead to unstable ternary organic photovoltaic cells

For organic photovoltaic (OPV) devices to achieve consistent performance and long operational lifetimes, organic semiconductors must be processed with precise control over their purity, composition, and structure. This is particularly important for high volume solar cell manufacturing where control of materials quality has a direct impact on yield and cost. Ternary-blend OPVs containing two acceptor-donor-acceptor (A-D-A)-type nonfullerene acceptors (NFAs) and a donor have proven to be an effective strategy to improve solar spectral coverage and reduce energy losses beyond that of binary-blend OPVs. Here, we show that the purity of such a ternary is compromised during blending to form a homogeneously mixed bulk heterojunction thin film. We find that the impurities originate from end-capping C=C/C=C exchange reactions of A-D-A-type NFAs, and that their presence influences both device reproducibility and long-term reliability. The end-capping exchange results in generation of up to four impurity constituents with strong dipolar character that interfere with the photoinduced charge transfer process, leading to reduced charge generation efficiency, morphological instabilities, and an increased vulnerability to photodegradation. As a consequence, the OPV efficiency falls to less than 65% of its initial value within 265 h when exposed to up to 10 suns intensity illumination. We propose potential molecular design strategies critical to enhancing the reproducibility as well as reliability of ternary OPVs by avoiding end-capping reactions.

(Invited) Probing Charge Carrier Dynamics in Porphyrin-Based Bulk Heterojunction Thin Films with Time-Resolved Terahertz Spectroscopy

Organic photovoltaic (OPV) solar cells have attracted much attention in recent years because of the low production cost and ease of device fabrication. However, the power conversion efficiency is still low compared to the silicon and perovskite solar cells so that further research is necessary to improve their performance. In particular, understanding of the detailed mechanisms of charge carrier generation, recombination and carrier transport process is very important for developing design principles of new compounds for OPVs. Until now, polymer-based compounds have been widely used for p-type semiconductors. However, it is not easy to obtain information on how the microscopic structure of bulk heterojunction (BHJ) blend of donor and acceptor materials affect the charge carrier dynamics because one cannot easily control the molecular weight and conformational distributions of polymer compounds. On the other hand, small molecule-based semiconductors have several unique advantages such well-defined chemical structures, ease of purification and small batch-to-batch variations.Tetrabenzoporphyrin (BP) has been frequently used as a small-molecule organic semiconductor. Recently, Yamada and coworkers synthesized diketopyrrolopyrrole-linked tetrabenzoporphyrin (DPP-BP) conjugates that have linear alkyl groups on the DPP moieties whose chain length is defined as n, namely, Cn-DPP-BP (n=4, 6, 8, or 10). For DPP-BP based solar cells, they demonstrated that alkyl chain length affects the power conversion efficiency. Therefore, it is very interesting to see how the local BHJ structures of DPP-BP based thin films affect the initial step of the charge carrier dynamics because such studies are difficult to perform for polymer-based systems. We can take advantage of small molecule-based systems to study the relationship between the local structure and the charge carrier dynamics.In this work, we used time-resolved terahertz (THz) spectroscopy to investigate the charge carrier dynamics of DPP-BP BHJ thin films blended with [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM). Time-resolved THz spectroscopy is a unique method to quantify charge carrier mobility with very fast time resolution (less than picosecond). This spectroscopy reflects the charge carrier dynamics in the local spatial region because of the high-frequency nature of the THz electric field. We chose C4-DPP-BP:PC61BM and C10-DPP-BP:PC61BM thin films for the THz measurements. In the previous study, it was found that C4-DPP-BP molecule prefers to take a face-on geometry on the substrate. A grain size of the aggregates was around 100 nm or smaller which were measured by atomic force microscopy. In such a structure, one can expect that charge transport takes place very efficiently to the electrode. Actually, power conversion efficiency is 5.2 % which is highest among a series of DPP-BP chromophores. On the other hand, C10-DPP-BP adopts an edge-on geometry on the substrate and forms micrometer-sized aggregates. In this structure, molecular stacking is oriented perpendicular to the electrode so that power conversion efficiency decreases to 0.19%.In contrast to the other measurements, the THz spectroscopy has sensitivity to in-plane motion of the charge carriers with respect to the substrate, we expect to observe higher in-plane mobility of the charge carriers in the C10-DPP-BP:PC61BM BHJ films compared to C4-DPP-BP based films. In contrast to our intuitive expectation, we found that the product of the carrier mobility and the yield of the photo-generated charge carriers is similar to each other. We consider that the similarity of the charge carrier dynamics results from the high-frequency nature of the local mobility of the polarons because most of the polarons are confined in less than a 10-nm length scale. Furthermore, the lowest limit of the carrier mobility obtained from our results is about 1.0 cm2V-1s-1 when the quantum yield of the charge carrier generation is assumed to be unity. This value is much higher than those obtained by space-charge-limited current method. We expect that charge separation occurs very efficiently when the local mobility of the charge carrier is high.In this contribution, we will present importance of the local mobility of the charge carriers and difference of charge transport between short and long length scales in DPP-BP based solar cells.

Microscopic Structures, Dynamics, and Spin Configuration of the Charge Carriers in Organic Photovoltaic Solar Cells Studied by Advanced Time-Resolved Spectroscopic Methods.

Organic photovoltaics (OPVs) are promising solutions for renewable energy and sustainable technologies and have attracted much attention in recent years. Two types of organic semiconductors are used as donor materials to fabricate OPV cells. One type is a photoconductive polymer, and the other type is a small-molecule-based compound. The discovery of a bulk-heterojunction (BHJ) structure using a mixture of p- and n-type organic semiconductors has dramatically increased the power conversion efficiency (PCE) of OPV cells. In this feature article, we review our recent studies on organic BHJ thin films and OPVs by using advanced time-resolved spectroscopic techniques. Two topics regarding the microscopic behaviors of the charge carriers are discussed. The first topic is focused on how to quantify the local mobility of the charge carriers. Here, we discuss charge carrier dynamics in diketopyrrolopyrrole-linked tetrabenzoporphyrin (DPP-BP) BHJ thin films studied by time-resolved terahertz spectroscopy on a subpicosecond to several tens of picoseconds time scale and by transient photocurrent measurements on a microsecond time scale. The second topic concerns the spin configuration and interaction of the electron and hole of the polaron pairs in polymer-based BHJ thin films and OPV cells studied by the time-resolved electron paramagnetic resonance method, time-resolved simultaneous optical and electrical detection, and measurement of the magnetoconductance effect.

Seeing structural evolution of organic molecular nano-crystallites using 4D scanning confocal electron diffraction (4D-SCED)

Direct observation of organic molecular nanocrystals and their evolution using electron microscopy is extremely challenging, due to their radiation sensitivity and complex structure. Here, we introduce 4D-scanning confocal electron diffraction (4D-SCED), which enables direct in situ observation of bulk heterojunction (BHJ) thin films. 4D-SCED combines confocal electron optic setup with a pixelated detector to record focused spot-like diffraction patterns with high angular resolution, using an order of magnitude lower dose than previous methods. We apply it to study an active layer in organic solar cells, namely DRCN5T:PC71BM BHJ thin films. Structural details of DRCN5T nano-crystallites oriented both in- and out-of-plane are imaged at ~5 nm resolution and dose budget of ~5 e−/Å2. We use in situ annealing to observe the growth of the donor crystals, evolution of the crystal orientation, and progressive enrichment of PC71BM at interfaces. This highly dose-efficient method opens more possibilities for studying beam sensitive soft materials.

Synthesis and Nanoarchitectonics of Novel Squaraine Derivatives for Organic Photovoltaic Devices.

Necessary advancements in the area of organic photovoltaic (OPV) devices include the upgrade of power conversion efficiencies (PCE) and stability. One answer to these demands lies in the research into new absorbers. Here, we focus on the development of new small molecule absorbers from the group of squaraines (SQs). These modular absorbers can be applied as donors in organic solar cells and have the ability to utilize a broad range of solar radiation if blended with suitable acceptors. In order to allow for the compatibility and favorable organization of donor and acceptor in the absorber layer, we intend to optimize the structure of the SQ by varying the groups attached to the squaric acid core. For that purpose, we accordingly developed a well-suited synthesis route. The novel alkyl- and benzyl-substituted aryl aminosquaraines were synthesized through an improved and eco-friendly procedure. Special emphasis was placed on optimizing the amination reaction to obtain initial precursors in the synthesis of squaraine, avoiding hitherto common catalytic processes. All SQ precursors and SQ products were completely described. The derived SQs were additionally characterized in thin-film configuration using cyclic voltammetry and UV-VIS spectroscopy and then processed to prepare self-standing bulk heterojunction (BHJ) thin films in conjunction with fullerene-based electron acceptors, which were characterized via profilometry. The comparison between SQ and BHJ solutions and thin films, using atomic force microscopy and UV-VIS spectroscopy, revealed differences in susceptibility for the organization and orientation of the constituting domains.

Low Voltage‐Loss Organic Solar Cells Light the Way for Efficient Semitransparent Photovoltaics

Organic solar cells that are transparent to visible light are highly desirable for applications such as window treatments or solar greenhouse panels. A key challenge is to simultaneously transmit most photons between 400 and 700 nm while retaining a high short‐circuit current and power conversion efficiency (PCE). Here, organic bulk heterojunction (BHJ) solar cells consisting of a donor polymer (PM2) is reported and the non‐fullerene acceptor ITIC‐Th achieves a PCE of 9.3%, and the BHJ thin films exhibit an average visible transmittance over 40%. This value is achieved primarily due to a very high open‐circuit voltage (VOC) of 0.93 V, which represents a voltage loss of only 0.50 V relative to the material optical bandgap, Eopt. In PM2:PC61BM devices, this voltage loss increases to 0.62 V (VOC = 0.82 V). It is found that this difference in VOC is due to higher nonradiative recombination in the fullerene‐based solar cell, suggesting that non‐fullerene acceptors may lead to better performance in semi‐transparent devices. The optoelectronic properties associated with PM2:ITIC‐Th and PM2:PC61BM blends are further corroborated by different morphological features and local structures at the donor‐acceptor interfaces characterized by atomic force microscopy, X‐ray scattering, and solid‐state NMR spectroscopy techniques.

Hidden surface photovoltages revealed by pump probe KPFM

In this work, we use pump-probe Kelvin probe force microscopy (pp-KPFM) in combination with non-contact atomic force microscopy (nc-AFM) under ultrahigh vacuum, to investigate the nature of the light-induced surface potential dynamics in alumina-passivated crystalline silicon, and in an organic bulk heterojunction thin film based on the PTB7-PC71BM tandem. In both cases, we demonstrate that it is possible to identify and separate the contributions of two different kinds of photo-induced charge distributions that give rise to potential shifts with opposite polarities, each characterized by different dynamics. The data acquired on the passivated crystalline silicon are shown to be fully consistent with the band-bending at the silicon-oxide interface, and with electron trapping processes in acceptors states and in the passivation layer. The full sequence of events that follow the electron–hole generation can be observed on the pp-KPFM curves, i.e. the carriers spatial separation and hole accumulation in the space charge area, the electron trapping, the electron–hole recombination, and finally the electron trap-release. Two dimensional dynamical maps of the organic blend photo-response are obtained by recording the pump-probe KPFM curves in data cube mode, and by implementing a specific batch processing protocol. Sample areas displaying an extra positive SPV component characterized by decay time-constants of a few tens of microseconds are thus revealed, and are tentatively attributed to specific interfaces formed between a polymer-enriched skin layer and recessed acceptor aggregates. Decay time constant images of the negative SPV component confirm that the acceptor clusters act as electron-trapping centres. Whatever the photovoltaic technology, our results exemplify how some of the SPV components may remain completely hidden to conventional SPV imaging by KPFM, with possible consequences in terms of photo-response misinterpretation. This work furthermore highlights the need of implementing time-resolved techniques that can provide a quantitative measurement of the time-resolved potential.

Photoluminescence of P3HT:PCBM bulk heterojunction thin films and effect of external electric field

AbstractSteady‐state and time‐resolved photoluminescence (PL) and electrophotoluminescence (E‐PL) have been recorded for bulk heterojunction samples of thin films of regio‐regular poly(3‐hexylthiophene) (P3HT) and methyl [6,6]‐phenyl‐C61‐butanoate (PCBM). The PL spectra of the bulk heterojunction samples showed a monotonic decrease of PL quantum yield with increased PCBM content in the film. The PL decay was measured with both a femtosecond up‐conversion technique and a time‐correlated single‐photon‐counting technique. The mechanism of PL quenching deviated from a simple Stern‐Volmer equation, explained in terms of an apparent static quenching with a sphere‐of‐action model and dynamic quenching. With increased content of PCBM, the static quenching played a dominant role. Upon application of an electric field, the E‐PL spectra of both P3HT and bulk heterojunction samples showed an enhanced quantum yield and incremented lifetime of PL of P3HT. The long‐range electron transfer from P3HT to PCBM was retarded upon application of an electric field; the field‐induced change increased with increasing PCBM content.

Narrowband Near‐Infrared Photodetector Enabled by Dual Functional Internal‐Filter‐Induced Selective Charge Collection

AbstractThe spectral selective detection of the near‐infrared (NIR) signals is important for biological sensing, healthy monitoring, and intelligent communication. Herein, a new method to fabricate a visible‐blind NIR‐sensitive narrowband photodetector (NPD) with excellent comprehensive performances is reported. The organic bulk heterojunction (OBHJ) thin film, based on an NIR‐sensitive organic acceptor, is employed to provide fast photoresponse, with adjustable cutoff edge. The key strategy of introducing a solution‐processable optical/electric bifunctional internal filter (CH3NH3PbI3 (MAPbI3)/CuSCN) realizes the selective collection of the NIR‐induced charge carriers. Further combined with the suitable energy level and high mobility of the MAPbI3/CuSCN layer, the extraction of NIR‐light‐induced charges from OBHJ is promoted efficiently. The NPD with optimized structure exhibits narrowband NIR response (full width at half maximum (FWHM) < 100 nm) with maximum external quantum efficiency value up to 74.26% and detection limit down to 3.6 pW cm−2, both of which are the best values among the ever reported NIR NPDs. The highest responsivity reaches 0.485 A W−1 in the NIR region, with a large linear dynamic range of 162 dB. The specific detectivity is close to 1013 Jones, enabling the device to detect weak NIR signals.

High-Efficiency Organic Photovoltaics using Eutectic Acceptor Fibrils to Achieve Current Amplification.

The intrinsic electronic properties of donor (D) and acceptor (A) materials in coupling with morphological features dictate the output in organic solar cells (OSCs). New physical properties of intimate eutectic mixing are used in nonfullerene-acceptor-based D-A1 -A2 ternary blends to fine-tune the bulk heterojunction thin film morphology as well as their electronic properties. With enhanced thin film crystallinity and improved carrier transport, a significant JSC amplification is achieved due to the formation of eutectic fibrillar lamellae and reduced defects state density. Material wise, aligned cascading energy levels with much larger driving force, and suppressed recombination channels confirm efficient charge transfer and transport, enabling an improved power conversion efficiency (PCE) of 17.84%. These results reveal the importance of utilizing specific material interactions to control the crystalline habit in blended films to form a well-suited morphology in guiding superior performances, which is of high demand in the next episode of OSC fabrication toward 20% PCE.

Plasmon-Assisted Direction- and Polarization-Sensitive Organic Thin-Film Detector.

Utilizing Bragg surface plasmon polaritons (SPPs) on metal nanostructures for the use in optical devices has been intensively investigated in recent years. Here, we demonstrate the integration of nanostructured metal electrodes into an ITO-free thin film bulk heterojunction organic solar cell, by direct fabrication on a nanoimprinted substrate. The nanostructured device shows interesting optical and electrical behavior, depending on angle and polarization of incidence and the side of excitation. Remarkably, for incidence through the top electrode, a dependency on linear polarization and angle of incidence can be observed. We show that these peculiar characteristics can be attributed to the excitation of dispersive and non-dispersive Bragg SPPs on the metal–dielectric interface on the top electrode and compare it with incidence through the bottom electrode. Furthermore, the optical and electrical response can be controlled by the organic photoactive material, the nanostructures, the materials used for the electrodes and the epoxy encapsulation. Our device can be used as a detector, which generates a direct electrical readout and therefore enables the measuring of the angle of incidence of up to 60° or the linear polarization state of light, in a spectral region, which is determined by the active material. Our results could furthermore lead to novel organic Bragg SPP-based sensor for a number of applications.

Dynamic behavior of photogenerated charge carriers in diketopyrrolopyrrole-linked tetrabenzoporphyrin-based bulk heterojunction thin films probed with time-resolved terahertz spectroscopy

Understanding of charge carrier dynamics on a picosecond time scale is very important for generation and relaxation of charge carriers in organic photovoltaic solar cells. Here, we study the dynamics of photogenerated charge carriers of diketopyrrolopyrrole-linked tetrabenzoporphyrin (C4-DPP-BP) bulk heterojunction (BHJ) thin films mixed with [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) by subpicosecond time-resolved terahertz (THz) spectroscopy. For the excitation at 800 nm, the decay time constants of the time-resolved THz signals are 0.5 ps and 14 ps that result from the relaxation of bound polaron pair. Furthermore, the results reveal that the amplitude of the subpicosecond decay in the time-resolved THz signal is sensitive to the fluence of the optical excitation pulse. It is considered that this decaying component at higher fluence originates from polaron pair annihilation. We also discuss the difference in carrier dynamics between neat C4-DPP-BP and the C4-DPP-BP based BHJ thin films to understand dynamic behavior of the local charge carriers.

Competitive role between conformational lock and steric hindrance in D-A copolymers containing 1,4-bis(thieno[3,2-b]thiophen-2-yl)benzene unit

We report the design and synthesis of two donor-acceptor (D-A) conjugated polymers based on a 2,2′-(2,5-dialkoxy-1,4-phenylene)dithieno[3,2-b]thiophene (DTTP) donor subunit having highly planar confirmation via S⋯O noncovalent bonding and electron-rich property. Introducing the DTTP subunit improves the interchain ordering and of resultant polymers, without losing solution processability. In order to promote the charge separation from photo-induced excitons at D/A interfaces, we control the position of side chain and investigate their effect on D/A phase separation in bulk-heterojunction films. We have systematically investigated the effects of noncovalent bonding and side chain position on the chain planarity and interaction packing of polymers, bulk-heterojunction thin film morphologies, and relevant photovoltaic devices. The thin film morphologies composed of conjugated polymers (PDTTP-2FBT or PDTTP-2FBTA) and with PC71BM are found to be critically dependent upon the side chain position and processing additive treatments. The resulting photovoltaic energy conversion efficiency of the polymer solar cells reached 6.79% and a comparative study on the physical, molecular modeling, and thin film characteristics was performed through DFT, GIXD, TPC, TPV, etc. The results obtained here provide an important guideline of tailoring the polymer chemical structure to optimize the molecular packing behavior and thin film morphology for high-performance organic electronics.

Bicontinuous network of electron donor-acceptor composites achieved by additive-free sequential deposition for efficient polymer solar cells

We report that sequential deposition of a highly crystalline polymer donor and a soluble fullerene acceptor leads to a well-defined interpenetrating network and enhanced power conversion efficiencies in bilayer polymer solar cells. Even without the use of solvent additives, layered thin films of poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-di(2-octyldodecyl)-2,2’; 5′,2’’; 5″,2‴-quaterthiophen-5,5‴-diyl)] (PffBT4T-2OD) and [6,6]-phenyl C71-butyric acid methyl ester (PC71BM), as electron donor and acceptor materials, respectively, showed bicontinuous networks similar to those of a PffBT4T-2OD:PC71BM bulk-heterojunction (BHJ) thin film processed with 1,8-diiodooctane (DIO) as a solvent additive. Transmission electron microscopy results confirmed the BHJ-like morphology of the bilayered PffBT4T-2OD/PC71BM thin films. Bilayer solar cells fabricated without the DIO additive produced a power conversion efficiency of η ≈ 7.65%, which is even higher than that of a BHJ solar cell fabricated with the DIO additive (η ≈ 7.04%). These results demonstrate that a highly crystalline polymer donor and an electron-accepting small molecule can be a good combination for efficient bilayer polymer solar cells.