Thick Lines Research Articles

High-Precision Defect Detection in Solar Cells Using YOLOv10 Deep Learning Model

This study presents an advanced defect detection approach for solar cells using the YOLOv10 deep learning model. Leveraging a comprehensive dataset of 10,500 solar cell images annotated with 12 distinct defect types, our model integrates Compact Inverted Blocks (CIBs) and Partial Self-Attention (PSA) modules to enhance feature extraction and classification accuracy. Training on the Viking cluster with state-of-the-art GPUs, our model achieved remarkable results, including a mean Average Precision (mAP@0.5) of 98.5%. Detailed analysis of the model’s performance revealed exceptional precision and recall rates for most defect classes, notably achieving 100% accuracy in detecting black core, corner, fragment, scratch, and short circuit defects. Even for challenging defect types such as a thick line and star crack, the model maintained high performance, with accuracies of 94% and 96%, respectively. The Recall–Confidence and Precision–Recall curves further demonstrate the model’s robustness and reliability across varying confidence thresholds. This research not only advances the state of automated defect detection in photovoltaic manufacturing but also underscores the potential of YOLOv10 for real-time applications. Our findings suggest significant implications for improving the quality control process in solar cell production. Although the model demonstrates high accuracy across most defect types, certain subtle defects, such as thick lines and star cracks, remain challenging, indicating potential areas for further optimization in future work.

ETICS measurements and prediction - Verification and validation of a predictive model for the improvement of airborne sound insulation of thick external linings

The increasing demand of the reduction of carbon emissions and the consumption of energy resources due to the construction sector leads to the concept of Zero-Energy buildings. It is therefore crucial ensuring technical and engineering compatibility between future advancements in energy efficiency and sound insulation. The sound insulation requirements for residential buildings are mandatory in Italian Regulations, tested on-site after construction completion. A noteworthy challenge is the potential synergy between specifications for energy efficiency and the sound insulation properties in building materials. This paper deals with the validation of the prediction model for the improvement of airborne sound insulation due to thick external linings, particularly materials used in ETICS (External Thermal Insulation System), based on mechanical properties of involved materials. Standard ISO 9052-1 for the determination of dynamic stiffness is intended for materials used under floating floors in dwellings. However, based on the methods of this standard, it is possible to perform measurements (with both hammer and shaker) even on thick linings materials, and use the results for the implementation of computational models for the predictions of airborne sound insulation improvement, as a function of frequency, with good accuracy.

Fiber-reinforced shotcrete lining for stabilizing rock blocks around underground cavities

Fiber-reinforced shotcrete is a high-performance material that presents some special characteristics, which can provide some suitable applications in the excavation of underground cavities. The presence of fibers induces an increase in the tensile strength, flexural strength and shear strength in the concrete, as well as allowing a ductile rather than brittle type of behavior. It can be used to create a lining of the underground cavity that allows the stabilization of rock blocks that show a tendency to slip or fall (from the side walls or from the crown area, respectively). In this work, some full-scale tests on the fiber-reinforced shotcrete lining are presented. From these tests, it was possible to measure the behavior of this material when it is loaded locally: it is the same type of action produced by the rock block when it is held back from falling or slipping. The results obtained have allowed to characterize this type of material from a mechanical point of view. A subsequent detailed analysis of the stability of rock blocks surrounding an underground cavity permitted to determine the static stabilizing contribution offered by the fiber-reinforced shotcrete lining, leading to the definition of the minimum thickness required, in relation to the type of block that is present (shape and size). It was possible to predict how a lining thickness of about 3.5 cm is able to stabilize (just 15 min after its spraying) rock blocks with an exposed surface area of up to 10 m2 and a distance of the internal vertex from the border of the cavity of up to 3 m

Thermal interface materials: From fundamental research to applications

AbstractThe miniaturization, integration, and high data throughput of electronic chips present challenging demands on thermal management, especially concerning heat dissipation at interfaces, which is a fundamental scientific question as well as an engineering problem—a heat death problem called in semiconductor industry. A comprehensive examination of interfacial thermal resistance has been given from physics perspective in 2022 in Review of Modern Physics. Here, we provide a detailed overview from a materials perspective, focusing on the optimization of structure and compositions of thermal interface materials (TIMs) and the interact/contact with heat source and heat sink. First, we discuss the impact of thermal conductivity, bond line thickness, and contact resistance on the thermal resistance of TIMs. Second, it is pointed out that there are two major routes to improve heat transfer through the interface. One is to reduce the TIM's thermal resistance (RTIM) of the TIMs through strategies like incorporating thermal conductive fillers, enhancing interfacial structure and treatment techniques. The other is to reduce the contact thermal resistance (Rc) by improving effective interface contact, strengthening bonding, and utilizing mass gradient TIMs to alleviate vibrational mismatch between TIM and heat source/sink. Finally, such challenges as the fundamental theories, potential developments in sustainable TIMs, and the application of AI in TIMs design are also explored.

Eucalyptus-Based Glued Laminated Timber: Evaluation and Prediction of Its Properties by Non-Destructive Techniques

Eucalyptus-based glued laminated timber (glulam) was produced to determine the feasibility of a non-destructive method (drilling resistance) to predict the properties of structural elements and add value to lower-quality hardwood species. Glulam was manufactured with formaldehyde (Resorcinol), reference condition, and bio-based (Castor oil-based) adhesives in two assembly schemes, the core composed either of two continuous lamellae each 105 cm long, or of two formed by the juxtaposition of shorter boards (35 and 55 cm). The shear strength of the glue line (fv0), modulus of elasticity (Ec90), and strength (fc90) in compression perpendicular to the grain; delamination (DL); and main and extended glue line thicknesses were evaluated. The Resistograph equipment was used to perform the perforation perpendicular to the glue line (samples extracted from the glulam elements) to correlate the properties. The results of this research demonstrate that the scheme of the boards had little effect on the physical and mechanical properties evaluated (except the main glue line and delamination), and the drilling resistance (DR) presents a significant correlation with practically all properties evaluated (variations in density values and other properties are explained by variations in DR values), making it possible to estimate Ec90 and fc90 with desired precision (R2adj ≈ 80%). This highlights the feasibility of using this methodology in the quality control of glulam elements. It is concluded that regardless of the adhesive, elements comprising a 105 cm-length core and external lamellae (T1 and control) are indicated for external use, presenting low delamination. Short-length central lamellae adhesively glued with PUR (T2) are not recommended for external applications due to their susceptibility to delamination. However, T2 is indicated for internal environments due to its low production cost. This study also proved the efficiency of using models based on drilling resistance to estimate wood density and its resistance to compression perpendicular to the fiber.

Development of a glue bonded shear connections aimed for mass timber composites

Mass timber composites (MTCs) generally require stiff glued connections to meet serviceability design criteria; however, achieving stiff glued connections without conventional pressing infrastructure can necessitate alternative gap filling adhesives. A readily available construction adhesive with potential for use with alternative pressing methods is investigated to develop the needed information for its commercial application in MTCs. The glue line thickness, surface coverage, three contact pressures, and how these parameters influence the load-slip curve of the connection when loaded in pure shear are investigated. The average glue line thickness ranged from 0.76 to 0.33 mm, with lower pressures having thicker glue lines and higher pressures having thinner glue lines. The planning precision was found to be more critical than clamping pressure for glue line thickness. Based on glue bond thickness testing and fabrication experience it is recommended to use 1.2–1.4 mm2 of adhesive per mm width to create full coverage glue bonds without excessive adhesive squeeze out. When tested under pure shear, specimens were observed to fail with a mixture of wood and glue, with more glue failure present as the pressure was increased. The initial stiffness of the connection tended to increase with clamping pressure, while the strength tended to decrease. Two bi-linear data fit models are applied to determine the yield point and simplify the load-slip behaviour for use in design analysis. Overall, the 75% max load method better fit the behaviour and was simpler to apply. The shear strength and stiffness achieved experimentally across all pressures were comparable to other glue connection literature results, and when applied in the design of a 10 m long MTC ribbed panel all pressures achieved near fully composite action. Overall, the adhesive has shown to be an easy to apply and structurally viable connection alternative for MTCs.

Associations between the Volume of Bilateral Inferior Turbinates with Ipsilateral and Contralateral Sinus Mucosal Lining Thicknesses in Various Ages and Sexes: a CBCT Study of 302 Individuals

Associations between the Volume of Bilateral Inferior Turbinates with Ipsilateral and Contralateral Sinus Mucosal Lining Thicknesses in Various Ages and Sexes: a CBCT Study of 302 Individuals

The effect of vitamin D3 and omega-3 combination, taken orally, on triglycerides, lining of intestine, and the biodiversity of gut microbiota in healthy rats.

The gut microbiota plays a key role in host health. An intake of omega-3 and vitamin D3 in a separate manner is vital for maintaining good health of gut microbiota and controlling some illness manifestations. The aim of this study is to investigate the potential change in biodiversity of the gut microbiome in healthy rats supplemented with vitamin D3, omega-3 alone and their combination and to reflect onto the triglyceride levels in serum and fecal samples. Using the 16S rRNA gene Miseq Illumina NGS, and monitoring triglyceride levels in serum and fecal samples coupled with several clinical parameters, we examined the effect of orally taken combination of omega-3 and vitamin D3 alongside the separate intake of supplements on gut microbiota in 24 healthy white Wistar rats for six weeks. The study findings showed that combination treatment encouraged the growth of opportunistic Clostridia class during day 21 and 42 of treatment by 7.7 and 7.4 folds, respectively, exhibited incomplete absorption levels for both supplements when used concomitantly, demonstrated a damaging effect on the gut intestinal lining wall thickness (126 µm) when compared to control group (158 µm), increasing lumen diameter (400 µm), and showed higher triglyceride level in fecal samples. These findings indicate that omega-3 and vitamin D3 supplements as combination intake reveal unfavorable effects, thus, it is advised to conduct further in-depth studies to clarify the presence or absence of any chemical interaction between both supplements' molecules and to investigate based on human model to attain a superior perspective.

A Markovian description of the multi-level source function and its application to the Lyman series in the Sun

Aims. We introduce a new method to calculate and interpret indirect transition rates populating atomic levels using Markov chain theory. Indirect transition rates are essential to evaluate interlocking in a multi-level source function, which quantifies all the processes that add and remove photons from a spectral line. A better understanding of the multi-level source function is central to interpret optically thick spectral line formation in stellar atmospheres, especially outside local thermodynamical equilibrium (LTE). Methods. We compute the level populations from a hydrogen model atom in statistical equilibrium, using the solar FALC model, a 1D static atmosphere. From the transition rates, we reconstruct the multi-level source function using our new method and compare it with existing methods to build the source function. We focus on the Lyman series lines and analyze the different contributions to the source functions and synthetic spectra. Results. Absorbing Markov chains can represent the level-ratio solution of the statistical equilibrium equation and can therefore be used to calculate the indirect transition rates between the upper and lower levels of an atomic transition. Our description of the multi-level source function allows a more physical interpretation of its individual terms, particularly a quantitative view of interlocking. For the Lyman lines in the FALC atmosphere, we find that interlocking becomes increasingly important with order in the series, with Ly-α showing very little, but Ly-β nearly 50% and Ly-γ about 60% contribution coming from interlocking. In some cases, this view seems opposed to the conventional wisdom that these lines are mostly scattering, and we discuss the reasons why. Conclusions. Our formalism to describe the multi-level source function is general and can provide more physical insight into the processes that set the line source function in a multi-level atom. The effects of interlocking for lines formed in the solar chromosphere can be more important than previously thought, and our method provides the basis for further exploration.

Effects of Radiative Transfer on the Observed Anisotropy in Magnetohydrodynamic Turbulent Molecular Simulations

We study the anisotropy of centroid and integrated intensity maps with synthetic observations. We perform postprocess radiative transfer including the optically thick regime that was not covered in Hernández-Padilla et al. We consider the emission in various CO molecular lines that range from optically thin to optically thick (12CO, 13CO, C18O, and C17O). The results for the velocity centroids are similar to those in the optically thin case. For instance, the anisotropy observed can be attributed to the Alfvén mode, which dominates over the slow and fast modes when the line of sight is at a high inclination with respect to the mean magnetic field. A few differences arise in the models with higher opacity, where some dependence on the sonic Mach number becomes evident. In contrast to the optically thin case, maps of integrated intensity become more anisotropic in optically thick lines. In this situation the scales probed are restricted, due to absorption, to smaller scales, which are known to be more anisotropic. We discuss how the sonic Mach number can affect the latter results, with highly supersonic cases exhibiting a lower degree of anisotropy.

Characteristics and Simulation of Icing Thickness of Overhead Transmission Lines across Various Micro-Terrains

The hazard of ice accretion on overhead power circuits is significant, yet predicting it is very difficult. The key reason lies in the shortage of sufficient observational data on ice thickness, and previous studies have also rarely taken into account micro-terrain and micro-meteorological conditions. In response to the challenge of simulating overhead line icing, this study introduces a new icing simulation technique that fully considers the effects of micro-terrain and micro-meteorology. For this technique, typical micro-terrains of overhead line areas are first identified by using high-resolution elevation data, and the icing thickness characteristics in different micro-terrains are analyzed. Subsequently, icing thickness simulations for different micro-terrains are conducted. The results indicate that during the icing process, the icing thickness ranges from 5 mm to 8 mm under three types of micro-terrain, namely, “uplift type”, “alpine drainage divide type” and “canyon wind channel type”, whereas the icing thickness is less than 5 mm in the “flat type” of micro-terrain. This finding suggests that the first three micro-terrain types facilitate icing on overhead transmission lines due to the condensation and uplifting effects of water vapor caused by terrain. However, flat terrain lacks the conditions necessary for water vapor accumulation and thus is not easy to form icing. The results are advantageous for the deployment of overhead power lines in intricate terrain. It is advisable to steer clear of regions susceptible to icing, and endeavor to install circuits in level territories whenever feasible. In addition, the simulated icing thickness under different terrains is in good agreement with the observations. Specifically, the correlation coefficient between simulated and observed icing thickness is significant at the 0.99 confidence level, and the deviations between them are within 0.5 mm. This signifies that the forecasting methodologies employed are dependable and possess significant implications as a reference for disaster prevention and mitigation efforts.

Mimicking Axons by Conductive Metal Lines Formed by Photocatalytically Grown Gold

Nanoionic memristive devices based on the field−driven migration of metal cations and oxygen vacancies have gathered high interest in the scientific community for their capability to technically mimic synaptic connections. Less attention has been given to long−range global plasticity in artificial neuronal networks. The aim of our research is to use light−stimulated growth of gold metal lines to technically mimic the growth of long−range axonal connections for neuromorphic computing architectures. For this purpose, we investigate the formation of metal lines by UV−light−stimulus−driven photocatalytic deposition of gold on titanium dioxide layers. In this study, we present a significant contribution that stems from our active involvement in CRC 1461- Neurotronics, a pivotal initiative funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation). Our research falls under Project-ID 434434223 – SFB 1461, within the broader context of Bio-inspired information pathways.0.8-mm wide photoactive titanium dioxide lines are defined by photolithography on a Sodalime glass substrate. We deposited a 70 nm thick titanium dioxide line on a 10 nm thick indium tin oxide adhesion layer by DC sputtering. The substrate was then heat treated for 90 minutes at 400°C and subsequently cooled on a metal plate to achieve the photocatalytically active anatase phase of titanium dioxide [1]. The growth process is conducted in a beaker by reduction from an aqueous gold chloride precursor solution (HAuCl4). In each step of the growth process, the substrate is placed in a beaker containing 15 ml of the precursor. The solution is obtained by dissolving 15 mg of HAuCl4 powder in 60 ml of deionized water. We utilize a UV LED with the peak wavelength of 365 nm and an approximate intensity of 1.8 - 2.7 mW/cm² to illuminate the sample in the beaker. The illumination time and UV intensity are crucial for this dynamic process. Here, we illuminated the sample for 12 hours and refreshed the solution every 2 hours. After each refreshment of the solution, the substrate is washed thoroughly with deionized (DI) water and is dried under nitrogen gas. We analyze the surface properties of grown gold utilizing scanning electron microscopy (SEM) and measure the conductance of the grown lines by applying voltage via the needles of a hard contact probe station.In the first experiments the growth of gold clusters on the surface is observed instead of the homogeneous gold coverage of the photolithographically defined titanium dioxide lines, which are needed for long-range electrical connections. Then, we coincidentally observed that the presence of a scratch on the titanium dioxide line led to the growth of continuous gold lines on the damaged area. Subsequently, deliberate scratches were introduced manually using tweezers, varying in both size and thickness. SEM images depict islands and covered areas, with notable growth observed on the scratched regions. Remarkably, wider scratches exhibit a proportionally increased width of the grown lines, and a uniform line devoid of any gaps is distinctly visible on broader scratches. We observed particle growth on thinner lines. However, unlike the uniform alignment observed in wider scratches, these particles did not coalesce into a continuous line. Instead, they remained separated from each other, exhibiting small gaps between individual particles. The morphological analysis of the grown gold line using SEM reveals a crystalline morphology of particles.As the primary objective of this research is to mimic axons with gold lines, ensuring conductivity is crucial for obtaining long−range electrical connections mimicking axons. To achieve this, voltage was applied using the needles of a hard contact probe station, and the resulting current was measured. The linear behavior observed in the I–V diagram of the wider line serves as a confirmation of its conductance (≈0.003 S).

Analysis of thermal insulation effect of off-wall insulation lining in high-temperature tunnel

Most prior studies on the insulation effect of off-wall insulation have neglected the natural convection of the air lining; this assumption is inconsistent with reality. In this study, the effect of natural air convection on the heat transfer mechanism in off-wall insulation lining was studied via experiments and numerical simulation. The thermal insulation effect of the air lining was evident. The temperature field distribution of the surrounding rock is affected by the natural convection in the air lining and is thus clearly related to the azimuth. The temperature disturbance of the surrounding rock in the direction of θ = 0° is the minimum, whereas that in the direction of θ = 180° is the maximum. The most significant factors affecting the thermal insulation effect of the off-wall insulation lining are the thermal conductivity of the rock and thermal resistance of the insulation layer, followed by thickness of the air lining and temperature difference between the original rock temperature and the air flow. The relationships between the average unstable heat transfer coefficient and various parameters were obtained via fitting. The fitting formula can be used in engineering practice to calculate the heat transfer from the surrounding rock to the tunnel airflow under various conditions.

Reactive Extrusion Printing of Zeolitic Imidazolate Framework Films.

An outstanding challenge for the field of metal-organic frameworks (MOFs) is structuring to form forms with greater useability. Reactive extrusion printing (REP) is a technique for the direct formation of films from their molecular components on-demand and on-location. Here we apply REP for the first time to zeolitic imidazolate frameworks (ZIFs) and study the interplay of solvent and molarity ratio on the phase distribution between ZIF-8 and ZIF-L in reactive printed films. Our results show that REP controllably directs phase formation between ZIF-L and ZIF-8 and that REP also gives control over crystal size and that high-quality ZIF-8 films, in particular, are produced in low-dispersity interconnected nanoparticulate form. Importantly, we show that REP is responsive to established surface-functionalization techniques to control important printing parameters of line width and thickness. This work expands the repertoire of REP to the important class of ZIFs.

Construction and Biological Evaluation of Different Nanoshell Thickness Ni@SiO2 Nanotubes as Good Protein Separation Carriers for Bovine Hemoglobin.

Nickel nanomaterials play an important role in biological applications, but they have high toxicity and poor biocompatibility. To overcome these defects, we coated the surface of Ni nanotubes with different thicknesses of SiO2 to reduce cytotoxicity, improve biocompatibility, and broaden their biological application value. This study aimed to construct Ni nanotubes with different thicknesses of SiO2 nanoshells; investigate the effects of silicon layer thickness, incubation time, and cell line category on the cytotoxicity of the as-synthesized materials, and evaluate the biocompatibility of the materials by biological enzymes. The Ni@SiO2-NH2 was selected for use as an adsorbent for the adsorption and purification of histidine-rich proteins, such as Bovine Hemoglobin (BHb). Magnetic Ni nanotubes were prepared by the template-chemical deposition method. A modified version of the Stöber process was used for the SiO2 coating of Ni@SiO2 nanotubes, and adjusted by changing the volume of TEOS for different thicknesses of SiO2 nanoshells. Different cell lines containing tumor cells and normal cells were used in the toxicity experiment, which confirmed the low cytotoxicity and good biocompatibility of Ni@SiO2. To achieve high efficiency of immobilization and purification of histidine- rich proteins, Ni@SiO2-NH2 was obtained by introducing the amino functional group. The Ni@SiO2-NH2 was found to possess lower cytotoxicity and higher adsorption capacity compared to other synthesized materials. Besides, the Ni@SiO2-NH2 also exhibited good selectivity of histidine-rich proteins. This work has not only provided ideas for reducing the cytotoxicity and improving the biocompatibility of biological nanomaterials, but also laid a foundation for subsequent biological applications.

Enhanced root system architecture in oilseed rape transformed with Rhizobium rhizogenes

Transformation of plants using wild strains of agrobacteria is termed natural transformation and is not covered by GMO legislation in e.g. European Union and Japan. In the current study, offspring lines (A11 and B3) of Rhizobium rhizogenes naturally transformed oilseed rape (Brassica napus) were randomly selected to characterize the morphological traits, and analyze the implications of such morphological changes on plant drought resilience. It was found that the introduction of Ri-genes altered the biomass partitioning to above- and under-ground parts of oilseed rape plants. Compared to the wild type (WT), the A11 and B3 lines exhibited 1.2–4.0 folds lower leaf and stem dry weight, leaf area and plant height, but had 1.3–5.8 folds greater root dry weight, root length and root surface area, resulting in a significantly enhanced root: shoot dry mass ratio and root surface area: leaf area ratio. In addition, the introduction of Ri-genes conferred reduced stomatal pore aperture and increased stomatal density in the B3 line, and increased leaf thickness in A11 line, which could benefit plant drought resilience. Finally, the modulations in morphological traits as a consequence of transformation with Ri-genes are discussed concerning resilience in water-limited conditions. These findings reveal the potential of natural transformation with R. rhizogenes for drought-targeted breeding in crops.

3D-Printed Meat Paste Using Minimal Additive: Assessment of Rheological and Printing Behavior with Post-Processing Stability

Printing foods in the desired shape with minimal additives and their stability after printing are the most important points for 3D food technology. In this study, the effects of water (5%, 10%, 15%, and 20%) and salt (0.5%, 1%, 1.5%, and 2%) on the printability of meat paste were evaluated to achieve improved textural and rheological properties. The printing parameters were examined at every stage, starting from the line thickness of the printed product, until the final 3D printed product was obtained. Accordingly, meat printability determined using different ingredient flow speed (3, 3.5, 4, 4.5, and 5), fill factor (1.2%, 1.3%, 1.4%, 1.5%, and 1.6%) and distance between layers (1.2, 1.4, and 1.6 mm). Salt addition increased the firmness and consistency of the samples, while the viscosity, storage modulus, and loss modulus decreased with the addition of water. Considering the line thickness and outer length, the most appropriate shape was obtained with 10% water and 1.5% salt. The optimal ingredient flow speed, fill factor, and distance between layers at a constant printing speed (2500 mm/min) were 3, 1.2%, and 1.4 mm, respectively. Four-layer-infilled 3D-printed samples maintained their initial shape after cooking, regardless of the cooking method. However, only baked products maintained their initial shapes among full-infilled samples. Although water and salt have different functions in meat, the use of the appropriate ratio is necessary for 3D-printed meat-based products to provide printability and post-production stability. To sum up optimum parameters and road map for printing meat and meat products including leftover meats and low-value by-products were revealed.

Substantial Energy Band Modulation of Semiconducting Hexagonal GaTe Quantum Wells by Layer Thickness and Mirror Twin Boundaries.

Exploring emerging two-dimensional (2D) van der Waals (vdW) semiconducting materials and precisely tuning their electronic properties at the atomic level have long been recognized as crucial issues for developing their high-end electronic and optoelectronic applications. As a III-VI semiconductor, ultrathin layered hexagonal GaTe (h-GaTe) remains unexplored in terms of its intrinsic electronic properties and band engineering strategies. Herein, we report the successful synthesis of ultrathin h-GaTe layers on a selected graphene/SiC(0001) substrate, via molecular beam epitaxy (MBE). The widely tunable quasiparticle band gaps (∼2.60-1.55 eV), as well as the vdW quantum well states (QWSs) that can be strictly counted by the layer numbers, are well characterized by onsite scanning tunneling microscopy/spectroscopy (STM/STS), and their origins are clearly addressed by density functional theory (DFT) calculations. More intriguingly, distinctive 8|8E and 4|4P (Ga) mirror twin boundaries (MTBs) are identified in the ultrathin h-GaTe flakes, which can induce decreased band gaps and prominent p-doping effects. This work should deepen our understanding on the electronic tunability of 2D III-VI semiconductors by thickness control and line defect engineering, which may hold promise for fabricating atomic-scale vertical and lateral homojunctions toward ultrascaled electronics and optoelectronics.

Analysis of the Effect of Letrozole Tablets Combined with Menotrophin in the Treatment of Infertility of Polycystic Ovary Syndrome

Objective: To investigate the clinical effects of Letrozole tablets combined with Menotrophin in infertile patients with polycystic ovary syndrome (PCOS). Methods: The time period of the study was from February 2023 to February 2024; 62 cases of PCOS infertility patients admitted to our hospital were selected and divided into an observation group (n = 31) and a control group (n = 31) by using the method of a random drawing of medical record number. The patients in the control group were treated with Letrozole tablets, and the patients in the observation group were treated with Letrozole tablets combined with Menotrophin, and the sex hormone levels, ovulation rate, the number of mature follicles, endometrial thickness, pregnancy rate, and early miscarriage rate were compared between the two groups. Results: Before treatment, the sex hormone levels of the two groups were compared, and there was no statistical difference (P > 0.05). After treatment, the sex hormone levels of the observation group were all better than those of the control group, and the differences were statistically significant (P < 0.05). The ovulation rate of the observation group was higher than that of the observation group, the number of mature follicles was more than that of the control group, and the endometrial thickness was greater than that of the control group, with statistically significant differences (P < 0.05). The pregnancy rate of the observation group was higher than that of the control group, and the rate of preterm delivery was lower than that of the control group, and the difference was statistically significant (P < 0.05). Conclusion: The combined application of Letrozole tablets and Menotrophin can improve the sex hormone level of PCOS infertility patients, promote their ovulation, improve follicular development, restore the thickness of endometrial lining, and increase the pregnancy rate of the patients and reduce the rate of preterm delivery, which is of value for promotion and application.

Plane SV-waves scattering by seawater convex surface topography and underlying lined tunnel in a saturated half-space

Analytical solutions of boundary-valued problems for aboveground topography and underground buried structures, especially for sites with overlying seawater, have always been challenging. Based on the region decomposition technique (RDT) and Hankel integral transform method (HITM), SV-waves scattering by the convex circular topography with seawater and underlying tunnel in a saturated half-space is solved. The primary problem is tackling additional scattered waves introduced by the water–soil interface and convex topography, while ensuring boundary conditions are all met. To this end, scattering wave potential functions in cylindrical coordinates are first transformed into the Hankel integral form in Cartesian coordinates. This greatly facilitates the straightforward application of free boundary conditions at the soil–seawater flat interface, rather than making a large circular arc approximate assumption, which, in turn, avoids the resultant accumulating errors. Secondly, scattering problem to be solved is mathematically and analytically formulated as solving a 5 × 5 linear equation system comprised of wave functions inside the convex topography and lining tunnel while satisfying all physical continuous boundary conditions. This is the main innovation and resulting consequence from the theoretical derivation process. Finally, validation of numerical examples between this paper, existing studies and theoretical analysis further demonstrates the reliability and general adaptability of solutions. Parametric studies of the incident SV waves are conducted to investigate the spatially varying seismic response. The effects of SV-waves incident angles and frequencies, tunnel burial depth, tunnel lining thickness, saturated soil porosity, and seawater depth are investigated and analyzed in detail. This study provides a feasible scheme of investigating the dynamic response of complex submarine sites, which is of great significance for both theoretical value and engineering purposes.