Thickness Measurements Research Articles

Relation of skinfold thickness with the serum lipids, glucose and blood pressure among Indian sedentary office workers

Background:Serum glucose, cholesterol, triglycerides and high-density lipoproteins (HDL) are established cardiovascular disease (CVD) markers, however accessibility to these markers is less in individuals from low-middle income countries. The non-invasive CVD risk marker especially skinfold measured fat percentages are less explored for its relevance with established serum biochemistry markers.Methods:A cross-sectional study was conducted in 70 sedentary office workers (aged 30–40 years) who were healthy. Peripheral fat percentages were estimated from four skinfold thickness measurements and biochemistry markers were measured and analysed using standard laboratory measurements. Blood pressure was also measured. Multivariate linear regression models were drawn to establish the association between the non-invasive and invasive CVD risk markers.Results:The skinfold measured fat percentage was negatively associated with the HDL (coefficient β = -0.15, standard error SE = 0.07, p < 0.05). No significant relation between the other biochemistry parameters with the skinfold thickness. Age and BMI were found to be mediating the above relationship.Conclusions:Skinfold thickness derived fat percentage is associated with the few of the CVD markers (especially HDL). Age and BMI are crucial mediating factors for the fat measurement. Skinfold measurements could be included as part of routine primary care screening for CVD risk, alongside invasive biochemistry parameters.

Distributed surface mass balance of an avalanche-fed glacier

Abstract. Local snow redistribution processes such as avalanches can considerably impact the spatial variability of accumulation on glaciers. However, this spatial variability is difficult to quantify with traditional surface mass balance measurements or geodetic observations. Here, we leverage high-quality and high-resolution surface velocity and elevation change maps for the period 2012–2021 from Pléiades stereo images and ice thickness measurements of Argentière Glacier (France) to invert for its distributed surface mass balance. Three inversions are conducted using three different ice thickness modelling approaches, two of which are constrained by observations. The inversions all show very good agreement between inverted surface mass balance and in situ measurements (RMSE between 0.50 and 0.96 mw.e.yr-1 for the 11-year average). The detected spatial variability in surface mass balance is consistent between the modelling approaches and much higher than what is predicted from an enhanced-temperature-index model calibrated with measurements from a dense network of stakes. In particular, we find high accumulation rates at the base of steep headwalls on the left-hand side of the glacier, likely related to avalanche deposits at these locations. We calculate distributed precipitation correction factors to reconcile the outputs from the enhanced-temperature-index model with the inverted surface mass balance data. These correction factors agree with the outputs of a parametrisation of snow redistribution by avalanching, indicating an additional 60 % mass input relative to the accumulation from solid precipitation at these specific locations, which was equivalent to an additional 20 % mass accumulation at the scale of Argentière Glacier without its two smaller tributaries. Using these correction factors in a forward-modelling exercise, we show that explicitly accounting for avalanches leads to twice more ice being conserved in the Argentière catchment by 2100 in an RCP 4.5 climate scenario and to a considerably different ice thickness distribution. Our results highlight the need to better account for such spatially variable accumulation processes in glacio-hydrological models.

Deep Learning-based Segmentation of Cervical Posterior Longitudinal Ligament Ossification in CT Images and Assessment of Spinal Cord Compression: A Two-center Study.

This study aims to develop a fully automated, CT-based deep learning（DL） model to segment ossified lesions of the posterior longitudinal ligament (OPLL) and to measure the thickness of the ossified material and calculate the cervical spinal cord compression factor. A total of 307 patients were enrolled, with 260 patients from Shanghai Changzheng Hospital, And 47 patients from the Traditional Chinese Medicine Hospital of Southwest Medical University. CT images were used to manually segment the OPLL by four experienced radiologists. The DL model employing a 3D U-Net framework was developed to segment the OPLLs. The system also measures the thickness of the ossified material at its thickest point and the diameter of the spinal canal at the corresponding level. Segmentation performance was evaluated using the Dice Similarity Coefficient (DSC), Average Surface Distance (ASD), and Intra-Class Correlation (ICC) between ground truth and segmentation volumes. Concordance between the radiologists' and the DL system's measurements of the ossified material thickness, residual spinal canal diameter at maximum compression, and cervical spinal cord compression coefficient was assessed in a randomly selected subset of 30 cases from the training set using ICCs and Bland-Altman plots. The DL system demonstrated average DSC of 0.81, 0.75, and 0.71 for the training, internal validation, and external test sets, respectively. The mean ASD was 1.30 for the training set, 2.35 for the internal validation set, and 2.63 for the external test set. The intraclass correlation coefficient (ICC) values of 0.958 for the thickness of the ossified material and 0.974 for the residual canal diameter measurement. The proposed DL model effectively detects and separates ossification foci in OPLL on CT images. It exhibits comparable performance to radiologists in quantifying spinal cord compression metrics.

Evaluation of changes in thickness of macular sublayers in patients using Hydroxychloroquine: a cross sectional case-control study and literature review

Purpose To assess changes in the thickness of macular sublayers in individuals taking hydroxychloroquine (HCQ) without any evident toxicity and to review the relevant literature. Methods This prospective case-control study examined 47 adults on HCQ without evident toxicity on spectral-domain optical coherence tomography (SD-OCT) and visual field tests, as well as 25 healthy controls. Macular thickness in different sublayers was measured using SD-OCT. The thickness of combination layers and the variability of sublayers were also recorded. Data were compared between the case and control groups, and the correlation between cumulative HCQ use and outcome measures was analysed. Results The average age of participants in the case and control groups was 45.6 ± 9.3 and 46.8 ± 11.7 years, respectively (p = 0.831). The percentage of female participants was 91.5% in the case group and 84.0% in the control group (p = 0.927). In the case group, the average duration of HCQ use was 5.1 ± 5.2 years, with a mean cumulative dose of 301 ± 365 g. No significant differences were found in the visual field mean deviation or pattern standard deviation between patients with HCQ use of <5-years vs. ≥5-years. Additionally, there were no statistically significant differences in various retinal thickness measurements between the case and control groups. However, a significant association was observed between the cumulative dose of HCQ and the thickness of the outer retinal layer (ORL) in both the outer (r = 0.344; p = 0.032) and inner Early Treatment Diabetic Retinopathy Study (ETDRS) macular rings (r = 0.303; p = 0.061). Conclusions No significant difference in macular sublayer thickness was found between patients taking HCQ without evident toxicity and the control group. A weak direct association was observed between the cumulative dose of HCQ and the ORL thickness. These findings suggest that analysing macular sublayer thickness may not be useful in detecting the earliest signs of presumed HCQ toxicity in individuals without classical sign of toxicity on qualitative SD-OCT or visual field test.

Tongue Ultrasonography in the Screening of Severe Obstructive Sleep Apnea Syndrome—Promising Potential for Overloaded Sleep Centers

Obstructive sleep apnea syndrome (OSAS) is a frequently underdiagnosed sleep disorder marked by recurrent episodes of apnea and/or hypopnea during sleep, primarily resulting from the partial or complete collapse of the upper airway. OSAS significantly affects patients’ health and quality of life. Additionally, it is a recognized risk factor for inducing microsleep episodes during daily activities, particularly in occupations such as professional driving, where sustained attention is critical. The aim of our study was to identify an effective screening test for use in outpatient settings, capable of distinguishing patients with a severe form of OSAS. Patients who test positive with this screening tool would subsequently be prioritized for polysomnographic evaluation in a sleep laboratory. A total of 64 patients who underwent polysomnography (PSG) or polygraphy (PG) examination at our clinic were subsequently examined by USG of the tongue with measurements of tongue base thickness (TBT) and the distance between lingual arteries (DLA) during wakefulness and in a relaxed tongue position. The measurements of TBT and DLA were subsequently correlated with the apnea–hypopnea index (AHI) obtained from PSG or PG. In our cohort of patients diagnosed with severe OSAS, a TBT threshold of ≥65 mm served as an effective cutoff value. A TBT value of ≥65 mm reached an AUC value of 78.1%, sensitivity of 74.4%, specificity of 61.9%, positive predictive value of 80%, negative predictive value of 54.2% and overall accuracy of 70.3%. A DLA value of ≥30 mm in our sample of patients with severe OSAS showed an AUC of 76.5%, sensitivity of 69.8%, specificity of 71.1%, positive predictive value of 83.3%, negative predictive value of 53.6%, and overall accuracy of 70.3%. Tongue USG markers, particularly TBT and DLA measurements during wakefulness and in a relaxed tongue position, show potential as effective screening tools for identifying severe OSAS in European populations. These markers demonstrate improved accuracy over traditional screening questionnaires by reducing the likelihood of false-negative results. Patients with a positive screening should preferably be referred for polysomnography. In this way, patients with a serious illness could receive adequate therapy sooner.

Research on resolution improving method of film thickness measurement through THz wave based on fitting the incomplete wave profile

Research on resolution improving method of film thickness measurement through THz wave based on fitting the incomplete wave profile

Thinning of central foveal thickness in the retina of patients with schizophrenia.

The neural retina shares a common embryonic origin with the brain and yields pathological changes like that in the brain in various neuropsychiatric disorders, including schizophrenia. Non-invasive examination by optical coherence tomography (OCT) revealed retinal structure abnormalities in patients with schizophrenia. This study investigated retina structures in 29 patients with schizophrenia and 25 healthy controls in a Chinese Han ethnic population with spectral domain OCT. Measurements of central foveal thickness (CFT) as well as other retinal structures in macular and peripapillary subregions were performed. Associations between OCT parameters and clinical features, including severity of positive and negative symptoms, disease duration and antipsychotic dosage were analyzed. With controlling for age and sex, patients showed significantly thinner CFT, thinner central macular thickness, and thinner total retinal thickness in subregions of the central, inner superior, inner temporal, and inner nasal macula of both eyes, thinner ganglion cell complex in a subregion of the left eye, as well as larger cup volume in the peripapillary region of the right eye. In addition, CFT also negatively correlated with severity of negative symptoms. These findings suggest that CFT has the potential to be a disease biomarker of schizophrenia.

Leucine zipper-based SAIM imaging identifies therapeutic agents to disrupt the cancer cell glycocalyx for enhanced immunotherapy.

The abnormally thick glycocalyx of cancer cells can provide a physical barrier to immune cell recognition and effective immunotherapy. Here, we demonstrate an optical method based on Scanning Angle Interference Microscopy (SAIM) for the screening of therapeutic agents that can disrupt the glycocalyx layer as a strategy to improve anti-cancer immune responses. We developed a new membrane labeling strategy utilizing leucine zipper pairs to fluorescently mark the glycocalyx layer boundary for precise and robust measurement of glycocalyx thickness with SAIM. Using this platform, we evaluated the effects of glycosylation inhibitors and targeted enzymatic degraders of the glycocalyx, with particular focus on strategies for cholangiocarcinoma (CCA), a highly lethal malignancy with limited therapeutic options. We found that CCA had the highest mean expression of the cancer-associated mucin, MUC1, across all cancers represented in the cancer cell line encyclopedia. Pharmacological inhibitors of mucin-type O-glycosylation and mucin-specific proteases, such as StcE, could dramatically reduce the glycocalyx layer in the YSCCC model of intrahepatic CCA. Motivated by these findings, we engineered Natural Killer (NK) cells tethered with StcE to enhance NK cell-mediated cytotoxicity against CCA. In a CCA xenograft model, these engineered NK cells demonstrated superior anti-tumor efficacy compared to wild-type NK cells, with no observable adverse effects. Our findings not only provide a reliable imaging-based screening platform for evaluating glycocalyx-targeting pharmacological interventions but also offer mechanistic insights into how CCA may avoid immune elimination through fortification of the glycocalyx layer with mucins. Additionally, this work presents a novel therapeutic strategy for mucin-overexpressing cancers, potentially improving immunotherapy efficacy across various cancer types.

Agreement between Two Biometers for Central Corneal Thickness Measurement in High Myopia Patients

Background In refractive surgery, the measurement of Central Corneal Thickness (CCT) is a critical factor in the preparation and screening of surgery to correct myopia. CCT measurements can be measured by optical biometers, including the Scheimpflug camera and Swept-source Optical Coherence Tomography (SS-OCT). Aim This study aimed to compare the Central Corneal Thickness (CCT) measurements made with Swept-source Optical Coherence Tomography (SS-OCT)-based biometers and the Scheimpflug camera in patients with high myopia. Methods An analytical cross-sectional study was performed to evaluate the agreement between Central Corneal Thickness (CCT) values obtained using Swept-source Optical Coherence Tomography (SS-OCT) and the Scheimpflug camera. We included a total of 28 individuals with high myopia, including 44 eyes, for our study. These patients underwent Central Corneal Thickness (CCT) tests using both Swept-source Optical Coherence Tomography (SS-OCT) and the Scheimpflug camera. The Bland-Altman test was used to assess the agreement between the two devices. Results Forty-four eyes with axial lengths ranging from 26.05 to 34.02 mm based on SS-OCT examinations were included in this study. The mean CCT was 527.59 ± 35.710 (p &lt;0.05) μm and 525.64 ± 35.421 μm (p &lt;0.05), based on SS-OCT and the Scheimpflug camera, respectively. The Bland-Altman plot revealed good agreement between both devices, with a mean difference of 2.3409 μm; however, a 95% limit of agreement demonstrated a wide range, ranging from -8.48509 to 12.39400 μm at a 95% confidence interval. Conclusion CCT measurements using SS-OCT and the Scheimpflug camera differed significantly among patients with high myopia. Our findings have suggested that CCT measurements made with either device should be interpreted with caution and not be used interchangeably.

Automatic measurement of choroidal thickness with swept-source optical coherence tomography in chronic Vogt-Koyanagi-Harada disease: 3 years’ follow-up

PurposeThe course of Vogt-Koyanagi-Harada (VKH) disease is typically assessed qualitatively using indocyanine green angiography (ICGA) and enhanced-depth imaging optical coherence tomography (EDI-OCT). However, a quantitative approach could improve accuracy and objectivity. The aim of this study was to assess the clinical value of the automated measurement capabilities of swept-source optical coherence tomography (SS-OCT) to measure choroidal thickness (quantitative approach) in chronic VKH.MethodsProspective, longitudinal case–control study at a tertiary university hospital involving 23 chronic VKH patients (9 convalescent and 14 quiescent) and 17 age-matched controls. Choroidal thickness was automatically measured with SS-OCT.ResultsChoroidal thinning and improved vision were associated with treatment while increasing thickness and worsening vision were associated with posterior relapse. Overall, 41.6% of asymptomatic (no change in visual acuity) recurrences in the convalescent group and 25% of recurrences in the quiescent group were detected by SS-OCT. All recurrences diagnosed by SS-OCT showed signs of inflammation on ICGA.ConclusionsAutomatic measurement of choroidal thickness with SS-OCT is a rapid, non-invasive method of detecting posterior segment recurrences and treatment response in VKH patients, and could reduce the need for angiography to monitor this disease.

Spectroscopic ellipsometry utilizing frequency division multiplexed lasers

Spectroscopic ellipsometry (SE), which measures the thickness of thin films in a non-contact way with an accuracy of angstroms, has been widely used for optical metrology. Several types of SE are available both commercially and in research, although they require specific implementations depending on the application. Here, we theoretically and experimentally demonstrate the Frequency Division Multiplexing Spectroscopic Ellipsometry (FDM-SE) technique. With respect to conventional rotating polarizing element ellipsometry, our variant uses discrete-wavelength intensity-modulated laser diodes. This modification enables the measurement of optical properties of materials at multiple wavelengths simultaneously. We further compare the performance of the FDM-SE to a commercial instrument by measuring the thickness of SiO2 films on a Si wafer, obtaining a difference between the measured thicknesses with both methods of less than 5 Å. The proposed FDM-SE technique therefore provides a more efficient alternative to conventional SE with a high accuracy for thickness measurements.

Intra-rater Reliability of B-mode Ultrasound in the Measurement of Soft Tissue Thickness and Composition over the Lateral Proximal Femur

ObjectivesComprehensive characterization of soft tissue composition and distribution over the lateral proximal femur is necessary to improve our understanding of fall-related hip fractures; however, a protocol that produces reliable data is needed. Accordingly, the aim of this study was to assess the intra-rater reliability of B-mode ultrasound measured muscle, adipose, and total soft tissue thicknesses over the lateral proximal femur in a simulated sideways fall configuration. MethodsTwenty-five young adults (12 males, 13 females, age (SD) = 20.8 (1.9) years) underwent B-mode ultrasound imaging of 12 locations over their lateral proximal femur while in a side-lying position. Side-lying was chosen to allow imaging of the tissues impacted during a lateral fall event. Muscle, adipose, and total soft tissue thicknesses were measured at each location (further grouped into posterolateral, lateral, and anterolateral locations for statistical analysis) and two-way mixed model absolute agreement intraclass correlation coefficients (ICCs) and standard error of measurement were used to assess reliability of tissue type, location, and sex. ResultsICCs were excellent (ICC > 0.9) for each tissue type, measurement location, and sex. There were interactions between tissue type, measurement location, and sex on reliability. While measures of adipose thickness were excellent across all conditions, reliability of muscle and total soft tissue thickness measurements were dependent on measurement location and sex. ConclusionsThis ultrasound imaging protocol demonstrated good-to-excellent reliability of soft tissue-specific thickness measurements over the lateral proximal femur. This protocol has implications for subject-specific hip fracture risk screening tools and biomechanical models of impact dynamics that incorporate biofidelic soft tissue morphology.

Cardiac MRI Pectoralis Muscle Thickness as a Measure of Sarcopenia: Prognostic Significance, Interreader Agreement, and Physiologic Correlation.

Purpose To evaluate pectoralis muscle thickness at routine cardiac MRI as a marker of sarcopenia, including prognostic significance for major adverse cardiac events (MACE), interobserver agreement, and correlation with physiologic parameters. Materials and Methods This retrospective cohort study included adult patients undergoing cardiac MRI for assessment of suspected cardiomyopathy between October 2018 and February 2020. Measurements of maximum pectoralis major thickness were performed by two experienced radiologists using axial images at the level of the carina. A random subset of 50 patients were re-evaluated to assess intra- and interobserver agreement. The primary end point was MACE, defined as a composite of cardiac death, resuscitated sudden cardiac death, appropriate implantable cardioverter defibrillator discharge, or hospitalization for heart failure. Prognostic significance of pectoralis major thickness measurements for MACE was assessed using Cox proportional hazard models, and correlation between muscle thickness measurements and cardiopulmonary exercise testing (CPET), performed within 1 year of MRI, was assessed using Spearman correlation. Results The study included 1045 patients (mean age, 50 years ± 17 [SD]; 642 male, 403 female). After median follow-up of 3.3 years (IQR: 2.3-3.9 years), MACE occurred in 66 patients. In multivariable models adjusted for patient age, left ventricular ejection fraction, late gadolinium enhancement, and cardiomyopathy cause, pectoralis major muscle thickness was predictive of MACE in both male (hazard ratio [HR], 0.89 [95% CI: 0.85, 0.94]; P < .001) and female patients (HR, 0.85 [95% CI: 0.76, 0.96]; P = .008), with improved model fit in nested models. Pectoralis muscle thickness measurements had excellent intra- and interobserver agreement (intraclass correlation coefficient, 0.99 and 0.95, respectively) and correlated with absolute peak oxygen uptake (r = 0.65, P < .0001) and oxygen uptake efficiency slope (r = 0.61, P < .001) in the subset who underwent CPET within 1 year of MRI (n = 258). Conclusion Pectoralis major muscle thickness at routine cardiac MRI is a simple, reproducible measure of sarcopenia that was associated with MACE occurrence in male and female patients and correlated with CPET parameters. Keywords: Cardiac, Cardiomyopathies, MR Imaging Supplemental material is available for this article. © RSNA, 2024.

The influence of temperature on ultrasonic signals in online measurement of oil film thickness

The influence of temperature on ultrasonic signals in online measurement of oil film thickness

Real-time measurement of dynamic film thickness based on ultrasonic technology

Real-time measurement of dynamic film thickness based on ultrasonic technology

Failure analysis of a large coal chemical reactor exhibiting bulging and cracking

Reactors represent the core components of coal chemical plants. Reactor failures can lead to significant operational hurdles, substantial financial losses, and potential casualties. Given these critical implications of reactor failures, thorough failure analyses of failed reactors are essential. This study investigated a failure incident involving bulging and cracking of a large coal chemical plant reactor. The failure analysis relied on several techniques, including macroscopic inspection, wall thickness measurement, mechanical property testing, hardness testing, metallographic analysis, and scanning electron microscopy analysis. The investigation confirmed that the failure of the reactor was caused by local overheating, which triggered high-temperature short-term creep, ultimately leading to bulging and cracking. To identify the factors responsible for this local overheating, a process analysis involving flow field and structural numerical simulations under abnormal working conditions was performed. The results of the flow field simulation, combined with field investigation data, revealed that the local overheating resulted from deposition or clogging of the distributor disk. Additionally, the extent of overheating was determined through the structural numerical simulation. In this paper, physical and chemical inspection, numerical modeling, and other means are comprehensively used to deduce the failure position through numerical simulation, to find out the failure reason, and to deduce the temperature range of failure. Overall, we hope that the results of this comprehensive failure analysis will provide valuable and experiential insights into the operation and maintenance of coal chemical plant reactors.

Thickness Measurement of Titanium-Alloy Sheets Based on the Resistance-Frequency Eddy Current Method

Thickness Measurement of Titanium-Alloy Sheets Based on the Resistance-Frequency Eddy Current Method

Model-based dimensional NDE from few X-ray radiographs: Application to the evaluation of wall thickness in metallic turbine blades

The extraction of 3D dimensional measurements based on a limited number of 2D X-ray radiographs of a part would offer a significant speed-up of quality control procedures in industry. However, there are challenges with respect to both measurements and uncertainties. This work addresses these challenges by creating an estimated numerical model of the imaged part on which dimensional measurements can be made. The numerical model is chosen as a parametric deformable model that encodes the expected shape variability of the parts resulting from the manufacturing process. The parameters and uncertainties of the numerical model of the imaged part are estimated by the registration of the computed projections of the model and the observed radiographs without the need of any segmentation. The registration requires the model, the initial parameters, and the observed radiographs. The proposed approach is applied to the inspection of turbine blades manufactured by investment casting, and in particular to the measurement of their wall thickness, which is a critical control. The deformable model consists in partitioning the inner ceramic core into multiple subparts, which may undergo a rigid body motion with respect to the master die. Wall thickness measurements are determined from the estimation of these rigid body motions. To assess the reliability of the proposed procedure, a repeatability study is performed. In addition, wall thickness measurements were compared to corresponding measurements from the surface of the metal boundary obtained by X-ray computed tomography. This surface was determined from a reconstructed tomogram using commercial software. Both analyses show that such measurements are reliable and efficient. Furthermore, residual differences between captured and computed projections reveal localized shape deviations from the CAD model, meaning that despite localized model errors, the approach is operable.

Assessing scleral thickness in patients with POAG and myopia by using OCT.

The aim of the study is to utilize swept-source OCT for imaging the rear sclera near the ONH, calculating the thickness of the SL and lamina, and examining how these measurements correspond to various metrics. Cross-sectional design with a prospective approach. The study included 96 glaucoma patients and 39 control subjects, all with axial lengths greater than 23 mm. Swept-source OCT was used to visualize the subfoveal and ONH regions. Thicknesses of SL and lamina were then calculated from the "B-scan" visuals collected. In order to confirm the consistency of the calculation, "intraclass correlation coefficients" were computed from specific "B-scans". The study compared the thickness of the SL and lamina in subjects with NTG to those with POAG. A "Pearson correlation" was conducted to analyze the connections between the thickness of the SL and lamina with various ocular parameters. Swept-source OCT enabled the measurement of posterior SL thickness in 65.9% and laminar thickness in 89.8% of the subjects. The consistency of measurements taken by different observers and by the same observer varied from moderate to excellent. There was a notable variation among the NTG and POAG sets in terms of subfoveal SL thickness, with measurements of 680.84 ± 170.60 mm and 486.55 ± 125.21 mm, respectively. The connection among subfoveal SL thickness and axial-length was discovered to be negative in subjects with NTG, but this was not observed in subjects with POAG. The variation in connection among the 2 subject groups was statistically important (r [ L0.687, P < 0.002). "Swept-source OCT" identified variations in posterior SL thickness between NTG and POAG eyes. The subfoveal scleral thickness showed a negative association with axial-length, particularly in eyes with normal-tension glaucoma.

Preoperative Evaluation of Lingual Cortical Plate Thickness and the Anatomical Relationship of the Lingual Nerve to the Lingual Cortical Plate via 3T MRI Nerve-Bone fusion.

To evaluate the reliability of 3 T MRI nerve-bone fusion in assessing the lingual nerve (LN) and its anatomical relationship to the lingual cortical plate prior to the impacted mandibular third molar (IMTM) extraction. The MRI nerve and bone sequences used in this study were 3D-T2-weighted fast field echo (3D-T2-FFE) and fast field echo resembling a CT using restricted echo-spacing (FRACTURE), respectively. Both sequences were performed in 25 subjects, and the resulting 3D-T2-FFE/FRACTURE fusion images were assessed by two independent observers. Semi-quantitative analyses included assessments of overall image quality, image artifacts, nerve continuity, and the detectability of five intermediate points (IPs). Quantitative analyses included measurements of the lingual cortical plate thickness (LCPT), vertical distance (V1* and V2*) and the closest horizontal distance (CHD) between the LN and the lingual cortical plate. Reliability was evaluated using weighted Cohen's kappa coefficient (κ), intraclass correlation coefficient (ICC) and Bland-Altman plots. Differences in LCPT between 3D-T2-FFE/FRACTURE fusion images and one-beam computed tomography (CBCT) were compared using independent samples T-tests or Mann-Whitney U tests. The fusion images demonstrated that the LN continuity score was 3.00 (1.00) (good), with 88% (44/50) of LNs displayed continuously to the IMTM level. Intra-reader agreement for nerve continuity was moderate (κ = 0.527), as was inter-reader agreement (κ = 0.428). The intra-reader and inter-reader agreement for LCPT measurements at the neck, mid-root and apex of the IMTM were all moderate (ICC > 0.60). Intra-reader agreements for V1*, V2* and CHD were moderate to excellent (ICC = 0.904, 0.967 and 0.723, respectively), and inter-reader agreements for V1*, V2* and CHD were also moderate to excellent (ICC = 0.948, 0.941 and 0.623, respectively). The reliability of LCPT measurements between 3D-T2-FFE/FRACTURE fusion and CBCT was moderate (ICC = 0.609-0.796). The 3D-T2-FFE/FRACTURE fusion technique demonstrated potential feasibility for the identification of the LN and its relationship to the lingual cortical plate, as well as for the measurement of LCPT. This study has generated a dataset that is capable of simultaneously defining the LN and LCPT.