Thermostability Measurements Research Articles

AbMelt: Learning antibody thermostability from molecular dynamics

Antibody thermostability is challenging to predict from sequence and/or structure. This difficulty is likely due to the absence of direct entropic information. Herein, we present AbMelt where we model the inherent flexibility of homologous antibody structures using molecular dynamics simulations at three temperatures and learn the relevant descriptors to predict the temperatures of aggregation (Tagg), melt onset (Tm,on), and melt (Tm). We observed that the radius of gyration deviation of the complementarity determining regions at 400 K is the highest Pearson correlated descriptor with aggregation temperature (rp = −0.68 ± 0.23) and the deviation of internal molecular contacts at 350 K is the highest correlated descriptor with both Tm,on (rp = −0.74 ± 0.04) as well as Tm (rp = −0.69 ± 0.03). Moreover, after descriptor selection and machine learning regression, we predict on a held-out test set containing both internal and public data and achieve robust performance for all endpoints compared with baseline models (Tagg R2 = 0.57 ± 0.11, Tm,on R2 = 0.56 ± 0.01, and Tm R2 = 0.60 ± 0.06). In addition, the robustness of the AbMelt molecular dynamics methodology is demonstrated by only training on <5% of the data and outperforming more traditional machine learning models trained on the entire data set of more than 500 internal antibodies. Users can predict thermostability measurements for antibody variable fragments by collecting descriptors and using AbMelt, which has been made available.

Structural mechanism of a drug-binding process involving a large conformational change of the protein target

Proteins often undergo large conformational changes when binding small molecules, but atomic-level descriptions of such events have been elusive. Here, we report unguided molecular dynamics simulations of Abl kinase binding to the cancer drug imatinib. In the simulations, imatinib first selectively engages Abl kinase in its autoinhibitory conformation. Consistent with inferences drawn from previous experimental studies, imatinib then induces a large conformational change of the protein to reach a bound complex that closely resembles published crystal structures. Moreover, the simulations reveal a surprising local structural instability in the C-terminal lobe of Abl kinase during binding. The unstable region includes a number of residues that, when mutated, confer imatinib resistance by an unknown mechanism. Based on the simulations, NMR spectra, hydrogen-deuterium exchange measurements, and thermostability measurements and estimates, we suggest that these mutations confer imatinib resistance by exacerbating structural instability in the C-terminal lobe, rendering the imatinib-bound state energetically unfavorable.

Disease variants of human Δ1-pyrroline-5-carboxylate reductase 2 (PYCR2)

Pyrroline-5-carboxylate reductase (PYCR in humans) catalyzes the final step of l-proline biosynthesis by catalyzing the reduction of L-Δ1-pyrroline-5-carboxylate (L-P5C) to l-proline using NAD(P)H as the hydride donor. In humans, three isoforms PYCR1, PYCR2, and PYCR3 are known. Recent genome-wide association and clinical studies have revealed that homozygous mutations in human PYCR2 lead to postnatal microcephaly and hypomyelination, including hypomyelinating leukodystrophy type 10. To uncover biochemical and structural insights into human PYCR2, we characterized the steady-state kinetics of the wild-type enzyme along with two protein variants, Arg119Cys and Arg251Cys, that were previously identified in patients with microcephaly and hypomyelination. Kinetic measurements with PYCR2 suggest a sequential binding mechanism with L-P5C binding before NAD(P)H and NAD(P)+ releasing before L-Pro. Both disease-related variants are catalytically impaired. Depending on whether NADPH or NADH was used, the catalytic efficiency of the R119C protein variant was 40 or 366 times lower than that of the wild-type enzyme, while the catalytic efficiency of the R251C protein variant was 7 or 26 times lower than that of the wild-type enzyme. In addition, thermostability and circular dichroism measurements suggest that the R251C protein variant has a pronounced folding defect. These results are consistent with the involvement of Arg119Cys and Arg251Cys in disease pathology.

Production, Processing, and Characterization of Synthetic AAV Gene Therapy Vectors.

Over the last two decades, gene therapy vectors based on wild-type Adeno-associated viruses (AAV) are safe and efficacious in numerous clinical trials and are translated into three approved gene therapy products. Concomitantly, a large body of preclinical work has illustrated the power and potential of engineered synthetic AAV capsids that often excel in terms of an organ or cell specificity, the efficiency of in vitro or in vivo gene transfer, and/or reactivity with anti-AAV immune responses. In turn, this has created a demand for new, scalable, easy-to-implement, and plug-and-play platform processes that are compatible with the rapidly increasing range of AAV capsid variants. Here, the focus is on recent advances in methodologies for downstream processing and characterization of natural or synthetic AAV vectors, comprising different chromatography techniques and thermostability measurements. To illustrate the breadth of this portfolio, two chimeric capsids are used as representative examples that are derived through forward- or backwards-directed molecular evolution, namely, AAV-DJ and Anc80. Collectively, this ever-expanding arsenal of technologies promises to facilitate the development of the next AAV vector generation derived from synthetic capsids and to accelerate their manufacturing, and to thus boost the field of human gene therapy.

Theoretical identification of thermostabilizing amino acid mutations for G-protein-coupled receptors.

Thermostabilization of a membrane proteins, especially G-protein-coupled receptors (GPCRs), is often necessary for biochemical applications and pharmaceutical studies involving structure-based drug design. Here we review our theoretical, physics-based method for identifying thermostabilizing amino acid mutations. Its novel aspects are the following: The entropic effect originating from the translational displacement of hydrocarbon groups within the lipid bilayer is treated as a pivotal factor; a reliable measure of thermostability is introduced and a mutation which enlarges the measure to a significant extent is chosen; and all the possible mutations can be examined with moderate computational effort. It was shown that mutating the residue at a position of NBW = 3.39 (NBW is the Ballesteros-Weinstein number) to Arg or Lys leads to the stabilization of significantly many different GPCRs of class A in the inactive state. Up to now, we have been successful in stabilizing several GPCRs and newly solving three-dimensional structures for the muscarinic acetylcholine receptor 2 (M2R), prostaglandin E receptor 4 (EP4), and serotonin 2A receptor (5-HT2AR) using X-ray crystallography. The subjects to be pursued in future studies are also discussed.

Thermal shift assay: Strengths and weaknesses of the method to investigate the ligand-induced thermostabilization of soluble guanylyl cyclase

Thermal shift assay is a fluorescence dye based biochemical method to determine the melting point of a protein. It can be used to investigate the ligand-induced stabilization of proteins and helps to increase the likelihood of crystallization in biological samples. Dimeric proteins like soluble guanylyl cyclase (sGC) have specific structural and functional properties which may pose a challenge in thermal shift measurements. In this paper, thermal shift assay was used to examine ligand-induced thermostabilization of the dimeric heme-containing protein soluble guanylyl cyclase. Adjustment of the parameters buffer solution, pH, protein / dye ratio and protein amount per well yielded a one-phase melting curve of sGC with a sharp transition and high reproducibility. We found that thermal shift measurement is not affected by heme state or heme content of the enzyme preparation. We used the method to investigate the thermostabilization of sGC induced by the heme-mimetic activator drugs cinaciguat, BAY 60-2770 and BR 11257 in combination with non-hydrolyzable nucleotides. Measurements with the dicarboxylic drugs cinaciguat and BAY 60-2770 yielded steep melting curves with high amplitudes. In contrast, in the presence of the monocarboxylic sGC activator BR 11257, melting curves appear flattened in the dye-based measurements. In the present paper, we show that activity-based thermostability measurements are superior to dye-based measurements in detecting the thermostabilizing influence of sGC activator drugs.

Thermal sensitivity as a quality control attribute for biotherapeutics: The L-asparaginase case.

Thermal sensitivity, as a practical measure of thermostability, is an interesting quality attribute that can be used in the quality control (QC) release of biopharmaceuticals. This article investigates circular dichroism (CD) spectroscopy and nano-differential scanning fluorimetry (nano-DSF) to evaluate the thermal stability of E.coli L-asparaginase (L-ASNase) for QC purposes. In CD, molar ellipticity as a function of temperature (from 20 to 80°C) was measured at 222nm. Different L-ASNase samples dissolved in different diluents were investigated by determining the melting temperature (Tm ) from the first derivative curve as well as the slope of the fitted sigmoidal function of the temperature gradient CD data. The obtained Tm values could be correlated with the L-ASNase sample origin as well as with the pH of the diluent. The Tm values obtained from the CD data were moreover consistent with the Tm values determined by nano-DSF, confirming their reliability. Next to the Tm value, also the slope of the fitted sigmoidal CD-function was able to differentiate different L-ASNase samples, including unstressed from stressed protein. By using both the Tm and the curve slope, the thermal stability of L-ASNase was investigated, demonstrating and recommending the use of this heat-stress characteristic as a QC quality attribute of proteins, which can be applied to detect substandard and falsified proteins.

Ternary Complex Formation and Photoactivation of a Photoenzyme Results in Altered Protein Dynamics.

The interplay between protein dynamics and catalysis remains a fundamental question in enzymology. We here investigate the ns-timescale dynamics of a light-dependent NADPH:protochlorophyllide oxidoreductase (LPOR), a photoenzyme crucial for chlorophyll synthesis. LPORs catalyze the light-triggered trans addition of a hydride and a proton across the C17═C18 double bond of the chlorophyll precursor protochlorophyllide (Pchlide). Because of the lack of an LPOR structure, the global structural and dynamic consequences of LPOR/Pchlide/NADPH ternary complex formation remain elusive. Moreover, photoactivation of LPORs by low-light preillumination is controversially discussed as unequivocal proof for this phenomenon is lacking. By employing quasielastic neutron spectroscopy (QENS), we show that the formation of the ternary holoprotein complex as well as photoactivation lead to progressive rigidification of the protein. These findings are supported by thermostability measurements, which reveal different melting behavior and thermostabilities for the apo- and holoprotein ternary complexes. Molecular dynamics simulations in good agreement with the experimental QENS results suggest that the increased flexibility observed for the apoprotein stems from structural fluctuations of the NADPH and Pchlide substrate binding sites of the enzyme. On the basis of our results, in conjunction with activity and stability measurements, we provide independent proof for LPOR photoactivation, defined as a process that modifies the protein structure and dynamics, resulting in an increased substrate turnover. Our findings advance the structural and dynamic understanding of LPORs and provide a first link between protein dynamics and catalysis for this enzyme class.

Divergent Peptide Presentations of HLA-A*30 Alleles Revealed by Structures With Pathogen Peptides

Human leukocyte antigen (HLA) alleles have a high degree of polymorphism, which determines their peptide-binding motifs and subsequent T-cell receptor recognition. The simplest way to understand the cross-presentation of peptides by different alleles is to classify these alleles into supertypes. A1 and A3 HLA supertypes are widely distributed in humans. However, direct structural and functional evidence for peptide presentation features of key alleles (e.g., HLA-A*30:01 and -A*30:03) are lacking. Herein, the molecular basis of peptide presentation of HLA-A*30:01 and -A*30:03 was demonstrated by crystal structure determination and thermostability measurements of complexes with T-cell epitopes from influenza virus (NP44), human immunodeficiency virus (RT313), and Mycobacterium tuberculosis (MTB). When binding to the HIV peptide, RT313, the PΩ-Lys anchoring modes of HLA-A*30:01, and -A*30:03 were similar to those of HLA-A*11:01 in the A3 supertype. However, HLA-A*30:03, but not -A*30:01, also showed binding with the HLA*01:01-favored peptide, NP44, but with a specific structural conformation. Thus, different from our previous understanding, HLA-A*30:01 and -A*30:03 have specific peptide-binding characteristics that may lead to their distinct supertype-featured binding peptide motifs. Moreover, we also found that residue 77 in the F pocket was one of the key residues for the divergent peptide presentation characteristics of HLA-A*30:01 and -A*30:03. Interchanging residue 77 between HLA-A*30:01 and HLA-A*30:03 switched their presented peptide profiles. Our results provide important recommendations for screening virus and tumor-specific peptides among the population with prevalent HLA supertypes for vaccine development and immune interventions.

Photochromic behavior of 2,3-bis(2,5-dimethylthiophene-3-yl)thiophene-5-carbaldehyde oxime

ABSTRACTPhotochromic diarylethene oxime isomers were obtained by coupling between hydroxylamine hydrochloride and 2,3-bis(2,5-dimethylthiophene-3-yl)thiophene-5-carbaldehyde. The two isomers were confirmed by NMR. Photochromic behavior was investigated in THF. Reversible photochromism could be induced by alternated UV/Visible light. The solution color also can be toggled between colorless and light purple. Corresponding photo- and thermo-stability measurements indicate that they are stable in the dark at room temperature. However, the degradation of the two isomers is accelerated with the temperature rising and prolonged exposure to UV light. Optimized geometry structure and frontier molecular orbitals further supported their photochromic activity.

Structural Insights into TMB-1 and the Role of Residues 119 and 228 in Substrate and Inhibitor Binding.

Metallo-β-lactamases (MBLs) threaten the effectiveness of β-lactam antibiotics, including carbapenems, and are a concern for global public health. β-Lactam/β-lactamase inhibitor combinations active against class A and class D carbapenemases are used, but no clinically useful MBL inhibitor is currently available. Tripoli metallo-β-lactamase-1 (TMB-1) and TMB-2 are members of MBL subclass B1a, where TMB-2 is an S228P variant of TMB-1. The role of S228P was studied by comparisons of TMB-1 and TMB-2, and E119 was investigated through the construction of site-directed mutants of TMB-1, E119Q, E119S, and E119A (E119Q/S/A). All TMB variants were characterized through enzyme kinetic studies. Thermostability and crystallization analyses of TMB-1 were performed. Thiol-based inhibitors were investigated by determining the 50% inhibitory concentrations (IC50) and binding using surface plasmon resonance (SPR) for analysis of TMB-1. Thermostability measurements found TMB-1 to be stabilized by high NaCl concentrations. Steady-state enzyme kinetics analyses found substitutions of E119, in particular, substitutions associated with the penicillins, to affect hydrolysis to some extent. TMB-2 with S228P showed slightly reduced catalytic efficiency compared to TMB-1. The IC50 levels of the new thiol-based inhibitors were 0.66 μM (inhibitor 2a) and 0.62 μM (inhibitor 2b), and the equilibrium dissociation constant (KD ) of inhibitor 2a was 1.6 μM; thus, both were more potent inhibitors than l-captopril (IC50 = 47 μM; KD = 25 μM). The crystal structure of TMB-1 was resolved to 1.75 Å. Modeling of inhibitor 2b in the TMB-1 active site suggested that the presence of the W64 residue results in T-shaped π-π stacking and R224 cation-π interactions with the phenyl ring of the inhibitor. In sum, the results suggest that residues 119 and 228 affect the catalytic efficiency of TMB-1 and that inhibitors 2a and 2b are more potent inhibitors for TMB-1 than l-captopril.

Reconstructed ancestral enzymes suggest long-term cooling of Earth’s photic zone since the Archean

Paleotemperatures inferred from the isotopic compositions (δ18O and δ30Si) of marine cherts suggest that Earth's oceans cooled from 70 ± 15 °C in the Archean to the present ∼15 °C. This interpretation, however, has been subject to question due to uncertainties regarding oceanic isotopic compositions, diagenetic or metamorphic resetting of the isotopic record, and depositional environments. Analyses of the thermostability of reconstructed ancestral enzymes provide an independent method by which to assess the temperature history inferred from the isotopic evidence. Although previous studies have demonstrated extreme thermostability in reconstructed archaeal and bacterial proteins compatible with a hot early Earth, taxa investigated may have inhabited local thermal environments that differed significantly from average surface conditions. We here present thermostability measurements of reconstructed ancestral enzymatically active nucleoside diphosphate kinases (NDKs) derived from light-requiring prokaryotic and eukaryotic phototrophs having widely separated fossil-based divergence ages. The ancestral environmental temperatures thereby determined for these photic-zone organisms--shown in modern taxa to correlate strongly with NDK thermostability--are inferred to reflect ancient surface-environment paleotemperatures. Our results suggest that Earth's surface temperature decreased over geological time from ∼65-80 °C in the Archean, a finding consistent both with previous isotope-based and protein reconstruction-based interpretations. Interdisciplinary studies such as those reported here integrating genomic, geologic, and paleontologic data hold promise for providing new insight into the coevolution of life and environment over Earth history.

Diversified Anchoring Features the Peptide Presentation of DLA-88*50801: First Structural Insight into Domestic Dog MHC Class I.

Canines represent a crucial animal model for studying human diseases and organ transplantation, as well as the evolution of domestic animals. MHCs, with a central role in cellular immunity, are commonly used in the study of dog population genetics and genome evolution. However, the molecular basis for the peptide presentation of dog MHC remains largely unknown. In this study, peptide presentation by canine MHC class I DLA-88*50801 was structurally determined, revealing diversified anchoring modes of the binding peptides. Flexible and large pockets composed of both hydrophobic and hydrophilic residues can accommodate pathogen-derived peptides with diverse anchor residues, as confirmed by thermostability measurements. Furthermore, DLA-88*50801 contains an unusual α2 helix with a large coil in the TCR contact region. These results further our understanding of canine T cell immunity through peptide presentation of MHC class I and shed light on the molecular basis for vaccine development for canine infectious diseases, for example, canine distemper virus.

Initiating crystal growth kinetics of α-HC(NH2)2PbI3 for flexible solar cells with long-term stability

Flexible and stable energy conversion devices are core components for next generation flexible electronics. Perovskite solar cells using formamidinium lead iodide (FAPbI3) exhibit superior power conversion efficiency (PCE), but the strenuous process of n-i-p configuration and the instability of α-FAPbI3 become inevitable obstacles for practical application in flexible electronics. Here, we for the first time report the particular crystal growth process of α-FAPbI3 grain with a controlled size for the development of flexible perovskite solar cells. Through morphology, element and thermostability measurements, the crystalline size and film homogeneity are found to mainly depending on decent thermal energy and doping density of methylammonium bromine. Additionally, stable “pseudocubic” lattice with larger crystalline size is established owing to the varied tolerance factor. We demonstrated that the flexible solar cells exhibiting an average PCE of 12.41±0.52% (the optimal 13.03%), which slightly decreased to 10.98±1.00% (the optimal 12.0%) over one month at 35% humidity without encapsulation, based on the modified α-FAPbI3 for most efficient devices. This work favors the understanding of the crystal growth kinetics of α-FAPbI3 for flexible substrate, and paves the way for potential application of flexible electronics.

Engineering Giardia lamblia trimethylguanosine synthase (GlaTgs2) to transfer non-natural modifications to the RNA 5'-cap.

Trimethylguanosine synthase from Giardia lamblia (GlaTgs2) naturally catalyzes methyl transfer from S-adenosyl-L-methionine (AdoMet) to the exocyclic N(2) atom of the 5'-cap--a hallmark of eukaryotic mRNAs. The wild-type enzyme shows substrate promiscuity and can also use the AdoMet-analog AdoPropen for allyl transfer. Here we report on engineering GlaTgs2 to enhance the activity on AdoPropen. A mutational analysis, involving an alanine scan of 10 residues located around the active site, was performed. Positions V34 and S38 were identified as mutational hot spots and analyzed in greater detail by testing NNK libraries. Kinetic analysis and thermostability measurements revealed V34A as the best variant of GlaTgs2, with a ∼10-fold improved specificity for AdoPropen. Double mutants did not yield additional improvements due to low catalytic efficiencies and thermal destabilization. Homologous Tgs enzymes from Homo sapiens and G. intestinalis were also investigated regarding their catalytic activity on AdoPropen. While neither the human wild-type (WT) enzyme nor any of its variants showed activity on AdoPropen, the homologue from G. intestinalis (GinTgs) was remarkably active on AdoPropen. Introducing the best substitution at the homologous position led to variant T34A with ∼40-fold higher specificity for AdoPropen than the original GlaTgs2 WT.

Nα-terminal acetylation for T cell recognition: molecular basis of MHC class I-restricted nα-acetylpeptide presentation.

As one of the most common posttranslational modifications (PTMs) of eukaryotic proteins, N(α)-terminal acetylation (Nt-acetylation) generates a class of N(α)-acetylpeptides that are known to be presented by MHC class I at the cell surface. Although such PTM plays a pivotal role in adjusting proteolysis, the molecular basis for the presentation and T cell recognition of N(α)-acetylpeptides remains largely unknown. In this study, we determined a high-resolution crystallographic structure of HLA (HLA)-B*3901 complexed with an N(α)-acetylpeptide derived from natural cellular processing, also in comparison with the unmodified-peptide complex. Unlike the α-amino-free P1 residues of unmodified peptide, of which the α-amino group inserts into pocket A of the Ag-binding groove, the N(α)-linked acetyl of the acetylated P1-Ser protrudes out of the groove for T cell recognition. Moreover, the Nt-acetylation not only alters the conformation of the peptide but also switches the residues in the α1-helix of HLA-B*3901, which may impact the T cell engagement. The thermostability measurements of complexes between N(α)-acetylpeptides and a series of MHC class I molecules derived from different species reveal reduced stability. Our findings provide the insight into the mode of N(α)-acetylpeptide-specific presentation by classical MHC class I molecules and shed light on the potential of acetylepitope-based immune intervene and vaccine development.

Deep transcriptome-sequencing and proteome analysis of the hydrothermal vent annelid Alvinella pompejana identifies the CvP-bias as a robust measure of eukaryotic thermostability

BackgroundAlvinella pompejana is an annelid worm that inhabits deep-sea hydrothermal vent sites in the Pacific Ocean. Living at a depth of approximately 2500 meters, these worms experience extreme environmental conditions, including high temperature and pressure as well as high levels of sulfide and heavy metals. A. pompejana is one of the most thermotolerant metazoans, making this animal a subject of great interest for studies of eukaryotic thermoadaptation.ResultsIn order to complement existing EST resources we performed deep sequencing of the A. pompejana transcriptome. We identified several thousand novel protein-coding transcripts, nearly doubling the sequence data for this annelid. We then performed an extensive survey of previously established prokaryotic thermoadaptation measures to search for global signals of thermoadaptation in A. pompejana in comparison with mesophilic eukaryotes. In an orthologous set of 457 proteins, we found that the best indicator of thermoadaptation was the difference in frequency of charged versus polar residues (CvP-bias), which was highest in A. pompejana. CvP-bias robustly distinguished prokaryotic thermophiles from prokaryotic mesophiles, as well as the thermophilic fungus Chaetomium thermophilum from mesophilic eukaryotes. Experimental values for thermophilic proteins supported higher CvP-bias as a measure of thermal stability when compared to their mesophilic orthologs. Proteome-wide mean CvP-bias also correlated with the body temperatures of homeothermic birds and mammals.ConclusionsOur work extends the transcriptome resources for A. pompejana and identifies the CvP-bias as a robust and widely applicable measure of eukaryotic thermoadaptation.ReviewerThis article was reviewed by Sándor Pongor, L. Aravind and Anthony M. Poole.

Partial characterization of an inulinase produced by Aspergillus japonicus URM5633

Enzymes obtained by fermentation processes offer a number of advantages and have been widely researched and used throughout the world. This study aimed to partially characterise an inulinase produced from palm and cassava peel. The enzyme was produced via the solid-state fermentation of Aspergillus japonicus URM5633. The optimal temperatures were 50oC and 55oC, and the optimal pH values were 5.2 and 3.4 for inulinase fermentatively produced from palm and cassava peel, respectively. The thermostability measurements for inulinase produced in palm showed that the relative activity remained below 100% until 30 minutes of stability for all temperatures, but reached 106.8% at a temperature of 50oC after 60 minutes. Inulinase from the crude extract of cassava peel was pH stable and only decreased to 55% of the maximal activity over the course of the assay, suggesting that this enzyme can be used in inulinase production and can be utilized in food industries.

Amphipol-assisted folding of bacteriorhodopsin in the presence or absence of lipids: functional consequences

Amphipols are short amphipathic polymers designed to stabilize membrane proteins in aqueous solutions in the absence of detergent. Bacteriorhodopsin (BR), a light-driven proton pump, has been denatured, either by direct solubilization of the purple membrane in sodium dodecylsulfate (SDS) solution or by a procedure that involves delipidation with organic solvent followed by transfer to SDS, and renatured in amphipol A8-35. The effect of different renaturation procedures and of the presence or absence of lipids and the cofactor retinal have been investigated. The resulting samples have been characterized by absorbance spectroscopy, size-exclusion chromatography, thermostability measurements, and determination of photocycle kinetics. Transfer to A8-35 can be achieved by SDS precipitation, dilution, or dialysis, the first route resulting in the highest yield of refolding. Functional BR can be refolded whether in the presence or absence of lipids, higher yields being achieved in their presence. Retinal is not required for the protein to refold, but it stabilizes the refolded form and, thereby, improves folding yields. Lipids are not required for BR to perform its complete photocycle, but their presence speeds up the return to the ground state. Taken together, these data indicate that a membrane or membrane-mimetic environment is not required for correct decoding of the chemical information contained in the sequence of BR; functional folding is possible even in the highly foreign environment of lipid-free amphipols. BR interactions with lipids, however, contribute to an effective photocycle.

Thermal evaporation and x-ray photostability of dodecyl-passivated silicon nanoparticles

X-ray photoelectron spectroscopy (XPS) and x-ray absorption spectroscopy have been used to study the makeup of thin films of 6.5 nm diameter dodecyl-capped silicon nanoparticles (SiNPs) formed in a one-pot synthesis method of micelle reduction. Thermostability measurements show the SiNPs undergo thermal desorption at ∼240 °C, a higher temperature than for SiNPs capped by shorter hydrocarbon layers owing to the greater size of the nanoparticle system in this case. Suspensions of SiNPs are found to evaporate in a UHV environment intact with the hydrocarbon passivating layer preserved and form thin films which are visualized with microimaging FTIR spectroscopy. The stability of the capping layer within thick SiNP films under extended exposure (up to 2160 s) to 140 eV photons has been examined where XPS spectra show the breakdown of the passivating layer allowing the underlying silicon core to undergo subsequent oxidation.