Thermally Activated Delayed Fluorescence Materials Research Articles

Molecular Design and Synthetic Approaches for the Realization of Multichannel Radiative Decay Pathways in Gold(III) Complexes and Their Applications in Organic Light-Emitting Devices.

A unique class of tridentate diaryltriazine ligand-containing gold(III) complexes with thermally activated delayed fluorescence (TADF) and/or thermally stimulated delayed phosphorescence (TSDP) properties has been designed and synthesized. With a simple structural modification on the coordination of carbazole moiety in the monodentate ligand, a large spectral shift of ∼160 nm (ca. 4900 cm-1) spanning from sky blue to red emissions has been demonstrated in solid-state thin films. Three-state or four-state models have been employed in fitting the emission lifetimes of the gold(III) complexes at various temperatures. The findings clearly indicate the presence of three emitting states, S1, T1, and T1', suggesting the coexistence of TADF, phosphorescence, and TSDP. Notably, a minor structural change in the donor moiety between phenylcarbazolyl and diphenylaminoaryl has been demonstrated to turn on/off the TSDP, resulting in TADF-TSDP-phosphorescence or TADF-phosphorescence emitters. The TADF and/or TSDP properties have also been supported by temperature-dependent ultrafast transient absorption studies, with the direct observation of reverse intersystem crossing (RISC) and reverse internal conversion (RIC) and the determination of the activation parameters and excited state dynamics. Solution-processed and vacuum-deposited organic light-emitting devices (OLEDs) have been prepared, in which sky blue emitting devices based on 5 exhibit an operational lifetime LT70 ∼ 5 times longer than the previously reported sky blue emitting analogue that shows only TSDP property. These results have provided valuable insights into the manipulation of the excited states via rational molecular design toward the realization of gold(III)-based TSDP and/or TADF materials with multiple radiative decay pathways that show enhanced radiative decay rate constants (kr) for practical OLED applications.

Robust Sandwich‐Structured Thermally Activated Delayed Fluorescence Molecules Utilizing 11,12‐Dihydroindolo[2,3‐a]carbazole as Bridge

AbstractConstructing folded molecular structures is emerging as a promising strategy to develop efficient thermally activated delayed fluorescence (TADF) materials. Most folded TADF materials have V‐shaped configurations formed by donors and acceptors linked on carbazole or fluorene bridges. In this work, a facile molecular design strategy is proposed for exploring sandwich‐structured molecules, and a series of novel and robust TADF materials with regular U‐shaped sandwich conformations are constructed by using 11,12‐dihydroindolo[2,3‐a]carbazole as bridge, xanthone as acceptor, and dibenzothiophene, dibenzofuran, 9‐phenylcarbazole and indolo[3,2,1‐JK]carbazole as donors. They hold outstanding thermal stability with ultrahigh decomposition temperatures (556–563 °C), and exhibit fast delayed fluorescence and excellent photoluminescence quantum efficiencies (86 %–97 %). The regular and close stacking of acceptor and donors results in rigidified molecular structures with efficient through‐space interaction, which are conducive to suppressing intramolecular motion and reducing reorganized excited‐state energy. The organic light‐emitting diodes (OLEDs) using them as emitters exhibit excellent electroluminescence performances, with maximum external quantum efficiencies of up to 30.6 %, which is a leading value for the OLEDs based on folded TADF emitters. These results demonstrate the proposed strategy of employing 11,12‐dihydroindolo[2,3‐a]carbazole as bridge for planar donors and acceptors to construct efficient folded TADF materials is applicable.

Versatile Spiral Donor‐Based Thermally Activated Delayed Fluorescence Materials for Highly Efficient TADF‐OLED and TSF‐OLED Applications

AbstractHerein, a design strategy is explored for thermally activated delayed fluorescence (TADF) materials by employing the meta‐linkage of the spiral‐donors 10H‐spiro[acridine‐9,9'‐thioxanthene] (DspiroS) and 10',10'‐dimethyl‐10H,10'H‐spiro[acridine‐9,9'‐anthracene] (DspiroAc) to the robust acceptor 2,4,6‐triphenyl‐1,3,5‐triazine (TRZ). Two distinct TADF materials, m‐DspiroS‐TRZ and m‐DspiroAc‐TRZ, exhibiting unique photophysical properties and performance characteristics were synthesized. Interestingly, even subtle modifications in the molecular architecture can significantly impact the organization of materials in their aggregated state, thereby governing photophysical properties and inducing corresponding alterations in photoelectric characteristics. Notably, m‐DspiroS‐TRZ exhibits superior photophysical properties and exciton dynamics data, achieving a high photoluminescence quantum yield (PLQY) value of up to 95.9% and a rapid reverse intersystem crossing (RISC) rate (𝒌𝑹𝑰𝑺𝑪) of 1.0 × 106 s−1. This positions m‐DspiroS‐TRZ as a potentially excellent terminal emissive and sensitizing host material, inspiring further exploration of its applications in electroluminescence. Consequently, TADF organic light‐emitting device (TADF‐OLED) and TADF‐sensitized fluorescence (TSF‐OLED) based on m‐DspiroS‐TRZ have achieved maximum external quantum efficiencies (EQEs) of 31.8% and 34.5%, respectively, demonstrating the significant versatile potential of m‐DspiroS‐TRZ.

Exploring the potential of QSAR in the discovery of novel green TADF materials: an experimental and theoretical study

Thermally activated delayed fluorescence (TADF) materials have garnered significant attention in developing high-efficiency organic light-emitting diodes (OLEDs) for next-generation displays. Despite the progress in TADF research, the increasing complexity of molecular structures poses challenges in material design and synthesis. This study explores the potential of quantitative structure–activity relationship (QSAR) calculations, particularly AutoQSAR, to streamline TADF OLED material selection and design. By leveraging the predictive capabilities of QSAR, we aimed to enhance the accuracy and efficiency of material development. We employed computational modeling, synthesis, and device fabrication to evaluate the performance of a newly developed green TADF dopant material. Our findings indicate that QSAR-guided design predicts material properties effectively and optimizes OLED performance. The synthesized TADF material demonstrated promising efficiency, highlighting the advantages of integrating QSAR calculations into the material discovery process. This study underscores the feasibility of QSAR methodologies in the context of OLED materials, suggesting a pathway for faster and more accurate development. Future improvements in QSAR techniques and collaborative efforts between computational and experimental research will be essential in driving further advancements in OLED technology.

Donor-only substituted benzene achieves thermally activated delayed fluorescence

Thermally activated delayed fluorescence (TADF) is a promising mechanism for harvesting triplet excitons in organic light-emitting diodes (OLEDs). The donor–acceptor (D–A) design is the most conventional strategy for developing efficient TADF emitters. A subsequently emerged approach, known as the multiple resonance (MR) effect, also employs electron-donating and electron-withdrawing functional groups. Thus, developing TADF materials has traditionally relied on ingenuity in selecting and combining two functional units. Here, we have realized a TADF molecule by utilizing only a carbazole donor moiety. This molecule is an unusual example in the family of TADF materials and offers better insight into the electronic structures in the excited states for luminescent materials.

Synergistic Intramolecular Non-Covalent Interactions Enable Robust Pure-Blue TADF Emitters.

Stability-issues of organic light-emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) require further advancements, especially in pure-blue range of CIEy < 0.20, existing a dilemma between color purity and device lifetime. Though improving bond-dissociation-energy (BDE) can effectively improve material intrinsic stability, strategies to simultaneously improve BDE and photophysical performances are still lacking. Herein, it is disclosed that synergistic intramolecular non-covalent interactions (Intra-NI) can achieve not only the highest C─N BDE among blue TADF materials, but enhanced molecular-rigidity, near-unity photoluminescent quantum yields and short delayed lifetime. Pure-blue TADF-OLEDs based on proof-of-concept TADF material realize high external-quantum-efficiency and record-high LT80@500cdm-2 of 109h with CIEy = 0.16. Furthermore, deep-blue TADF-sensitized devices exhibit high LT80@500cdm-2 of 81h with CIEy = 0.10. The findings provide new insight into the critical role of Intra-NI in OLED materials and open the way to tackling vexing stability issues for developing robust pure-blue organic emitters and other functional materials.

Dual‐Core Engineering for Efficient Deep‐Blue Multiple Resonance Thermally Activated Delayed Fluorescent Materials

AbstractDeveloping narrowband blue multiple resonance (MR) organic emitters with Commission Internationale de L'Eclairage (CIE) y coordinates &lt;0.1 is essential for advanced display technologies. This study proposes a deep‐blue thermally activated delayed fluorescence (TADF) emitter, named 2BNO, which integrates two independent MR cores. Unlike many TADF materials with single‐bonded dual emitting cores, 2BNO utilizes a steric hindrance‐assisted fluorene bridge to achieve an orthorhombic molecular structure. The dual‐core MR‐TADF emitter shows enhanced light absorption and a high photoluminescence quantum yield. Notably, the emission of 2BNO is not significantly redshifted compared to single‐core compounds and maintains a narrow full width at half‐maximum (FWHM) of 24 nm with CIE coordinates of (0.147, 0.041) in 2Me‐THF solution, nearing the BT.2020 blue standard. Organic light‐emitting diodes (OLEDs) incorporating 2BNO as the emitter exhibit deep‐blue emission at 460 nm with a narrow FWHM of 29 nm and CIE coordinates of (0.14, 0.09). The dual emitting core design significantly improves device efficiency, achieving a high external quantum efficiency (EQE) of 19.8%. The dual‐core molecular design strategy in this work is demonstrated to be effective in promoting the efficiency of the TADF emitters while preserving deep‐blue color purity.

Design of Thermally Activated Delayed Fluorescence Materials: Transition from Carbonyl to Amide‐Based Acceptor

AbstractBenzophenone skeletons containing a carbonyl unit (O=C) have been widely used as electron acceptors in the thermally activated delayed fluorescence (TADF) materials. Herein, we present a novel molecular design concept for TADF materials by transitioning from a carbonyl to an amide (O=C−N) skeleton as the acceptor. The amide unit, compared to its carbonyl counterpart, offers a more stable electronic configuration. Leveraging this insight, we have developed a series of high‐performance TADF molecules based on benzoyl carbazole and carbazoline acceptors. These molecules exhibit exceptionally small singlet‐triplet energy gaps and pronounced aggregation‐enhanced emission properties, achieving photoluminescence quantum yields in neat films as high as 99 %. Consequently, these materials serve as efficient emitters in non‐doped organic light‐eimtting diodes (OLEDs), reaching a maximum quantum efficiency (EQEmax) of up to 26.0 %, significantly higher than the 17.0 % obtained with benzophenone acceptor‐based TADF molecules. Additionally, they have been used as TADF hosts in narrowband red fluorescent OLEDs, setting a record‐high EQEmax of 22.4 %.

Design of Thermally Activated Delayed Fluorescence Materials: Transition from Carbonyl to Amide-Based Acceptor.

Benzophenone skeletons containing a carbonyl unit (O=C) have been widely used as electron acceptors in the thermally activated delayed fluorescence (TADF) materials. Herein, we present a novel molecular design concept for TADF materials by transitioning from a carbonyl to an amide (O=C-N) skeleton as the acceptor. The amide unit, compared to its carbonyl counterpart, offers a more stable electronic configuration. Leveraging this insight, we have developed a series of high-performance TADF molecules based on benzoyl carbazole and carbazoline acceptors. These molecules exhibit exceptionally small singlet-triplet energy gaps and pronounced aggregation-enhanced emission properties, achieving photoluminescence quantum yields in neat films as high as 99 %. Consequently, these materials serve as efficient emitters in non-doped organic light-eimtting diodes (OLEDs), reaching a maximum quantum efficiency (EQEmax) of up to 26.0 %, significantly higher than the 17.0 % obtained with benzophenone acceptor-based TADF molecules. Additionally, they have been used as TADF hosts in narrowband red fluorescent OLEDs, setting a record-high EQEmax of 22.4 %.

Robust Sandwich-Structured Thermally Activated Delayed Fluorescence Molecules Utilizing 11,12-Dihydroindolo[2,3-a]carbazole as Bridge.

Constructing folded molecular structures is emerging as a promising strategy to develop efficient thermally activated delayed fluorescence (TADF) materials. Most folded TADF materials have V-shaped configurations formed by donors and acceptors linked on carbazole or fluorene bridges. In this work, a facile molecular design strategy is proposed for exploring sandwich-structured molecules, and a series of novel and robust TADF materials with regular U-shaped sandwich conformations are constructed by using 11,12-dihydroindolo[2,3-a]carbazole as bridge, xanthone as acceptor, and dibenzothiophene, dibenzofuran, 9-phenylcarbazole and indolo[3,2,1-JK]carbazole as donors. They hold outstanding thermal stability with ultrahigh decomposition temperatures (556-563 oC), and exhibit fast delayed fluorescence and excellent photoluminescence quantum efficiencies (86%-97%). The regular and close stacking of acceptor and donors results in rigidified molecular structures with efficient through-space interaction, which are conducive to suppressing intramolecular motion and reducing reorganized excited-state energy. The organic light-emitting diodes (OLEDs) using them as emitters exhibit excellent electroluminescence performances, with maximum external quantum efficiencies of up to 30.6%, which is a leading value for the OLEDs based on folded TADF emitters. These results demonstrate the proposed strategy of employing 11,12-dihydroindolo[2,3-a]carbazole as bridge for planar donors and acceptors to construct efficient folded TADF materials is applicable.

(Invited) Quantitative Prediction of Exciton Dynamics

Thermally activated delayed fluorescence (TADF) is now an established way to convert inhelently dark triplet excitons into light through reverse intersystem crossing (RISC).1-4 To realize the RISC process, minimizing the energy gap (ΔE ST) between S1 and T1 is considered to be effective theoretically, and this has been realized experimentally. At the beginning of the research, RISC had been the rate-limiting process in TADF, although RISC was possible. In such situation, we have shown that acceleration of RISC has now become possible through a variety of methods.5-7 Although excellent TADF materials and highly efficient TADF-based organic light-emitting diodes (OLEDs) have been realized as described above, the fundamental understanding is still insufficient. In the presentation, we first show our recently-proposed method for quantitatively predicting rate constants of all electronic transitions relevant to light emission.8-10 The method proposed here has successfully predicted all rate constants quantitatively and therefore can predict TADF performance precisely. The method also allows quantitative predictions of dynamics (time evolution) of experimentally-obtained rate constants for radiative, non-radiative, intersystem crossing, and RISC as well as exciton population dynamics.11 Such an approach will contribute significantly to the fundamental science of exciton dynamics.We express sincere thanks to my group members. This work was supported by JSPS KAKENHI Grant Numbers JP20H05840 (Grant-in-Aid for Transformative Research Areas, “Dynamic Exciton”). Computation time and NMR measurements were supported by the international Joint Usage/Research Centre at the Institute for Chemical Research, Kyoto University, Japan. Uoyama, H.; Goushi, K.; Shizu, K.; Nomura, H.; Adachi, C., Highly efficient organic light-emitting diodes from delayed fluorescence. Nature 2012, 492, 234. Kaji, H., et al., Purely organic electroluminescent material realizing 100% conversion from electricity to light. Nat. Commun. 2015, 6, 8476. Yang, Z., et al., Recent advances in organic thermally activated delayed fluorescence materials. Chem. Soc. Rev. 2017, 46, 915. Wong, M. Y.; Zysman-Colman, E., Purely organic thermally activated delayed fluorescence materials for organic light-emitting diodes. Adv. Mater. 2017, 29, 1605444. Wada, Y.; Nakagawa, H.; Matsumoto, S.; Wakisaka, Y.; Kaji, H., Organic light emitters exhibiting very fast reverse intersystem crossing. Nat. Photon. 2020, 14, 643. Ren, Y.; Wada, Y.; Suzuki, K.; Kusakabe, Y.; Geldsetzer, J.; Kaji, H., Efficient blue thermally activated delayed fluorescence emitters showingvery fast reverse intersystem crossing. Appl. Phys. Express 2021, 14, 071003. Wada, Y.; Wakisaka, Y.; Kaji, H., Efficient direct reverse intersystem crossing between charge transfer‐type singlet and triplet states in a purely organic molecule. ChemPhysChem 2021, 22, 625. Shizu, K.; Kaji, H., Theoretical determination of rate constants from excited states: Application to benzophenone. J. Phys. Chem. A 2021, 125, 9000. Shizu, K.; Kaji, H., Comprehensive understanding of multiple resonance thermally activated delayed fluorescence through quantum chemistry calculations. Commun. Chem. 2022, 5. Shizu, K.; Ren, Y. X.; Kaji, H., Promoting reverse intersystem crossing in thermally activated delayed fluorescence via the heavy-atom effect. J. Phys. Chem. A 2023, 127, 439.Shizu, K.; Kaji, H., submitted.

Aggregation Enhanced Thermally Activated Delayed Fluorescence through Spin‐Orbit Coupling Regulation

AbstractIntegrating aggregation‐induced emission (AIE) into thermally activated delayed fluorescence (TADF) emitters holds great promise for the advancement of highly efficient organic light emitting diodes (OLEDs). Despite recent advancements, a thorough comprehension of the underlying mechanisms remains imperative for the practical application of such materials. In this work, we introduce a novel approach aimed at modulating the TADF process by manipulating dynamic processes in excited states through aggregation effect. Our findings reveal that aggregation not only enhances both prompt and delayed fluorescence simultaneously but also imposes constraints on molecular reorientation. This constraint reinforces spin‐orbit coupling and reduces the energy gap between singlets and triplets. These insights deepen our understanding of the fundamental mechanisms governing the aggregation effect on TADF materials and provide valuable guidance for the design of high‐efficiency photoluminescent materials.

Aggregation Enhanced Thermally Activated Delayed Fluorescence through Spin-Orbit Coupling Regulation.

Integrating aggregation-induced emission (AIE) into thermally activated delayed fluorescence (TADF) emitters holds great promise for the advancement of highly efficient organic light emitting diodes (OLEDs). Despite recent advancements, a thorough comprehension of the underlying mechanisms remains imperative for the practical application of such materials. In this work, we introduce a novel approach aimed at modulating the TADF process by manipulating dynamic processes in excited states through aggregation effect. Our findings reveal that aggregation not only enhances both prompt and delayed fluorescence simultaneously but also imposes constraints on molecular reorientation. This constraint reinforces spin-orbit coupling and reduces the energy gap between singlets and triplets. These insights deepen our understanding of the fundamental mechanisms governing the aggregation effect on TADF materials and provide valuable guidance for the design of high-efficiency photoluminescent materials.

Multireference Ab Initio Calculations on Excited Electronic States of Carbazole-Based Organic Compounds for Thermally Activated Delayed Fluorescence.

The emerging technology of organic light-emitting diodes takes advantage of the thermally activated delayed fluorescence (TADF) mechanism for improved efficiency. Carbazole-based organic molecules are suitable for TADF emission because of charge transfer excitations between the electron-donor carbazole and an electron-acceptor unit. Computational design of new TADF molecules with the desired properties is challenging because charge-transfer excitations cannot be predicted accurately by time-dependent density functional theory. Four groups of carbazole-based donor-acceptor molecules have been studied using multireference ab initio methods to understand the nature of excited electronic states. The state-averaged complete active space self-consistent field (SA-CASSCF) and the N-electron valence state perturbation theory (NEVPT2) were used to calculate energies and oscillator strengths for multiple excited electronic states. The number of active electrons and orbitals and the number of excited states included in state-averaged CASSCF were selected such that the accuracy of ab initio predictions could be improved systematically. The procedure introduced here for the calculation of multiple excited electronic states of TADF candidates can be used to accelerate the computational search for efficient TADF materials.

Excited-State Engineering Enables Efficient Deep-Blue Light-Emitting Diodes Exhibiting BT.2020 Color Gamut.

Organic luminescent materials that exhibit thermally activated delayed fluorescence (TADF) can convert non-emissive triplet excitons into emissive singlet states through a reverse intersystem crossing (RISC) process. Therefore, they have tremendous potential for applications in organic light-emitting diodes (OLEDs). However, with the development of ultra-high definition 4K/8K display technologies, designing efficient deep-blue TADF materials to achieve the Commission Internationale de l'Éclairage (CIE) coordinates fulfilling BT.2020 remains a significant challenge. Here, an effective approach is proposed to design deep-blue TADF molecules based on hybrid long- and short-range charge-transfer by incorporation of multiple donor moieties into organoboron multiple resonance acceptors. The resulting TADF molecule exhibits deep-blue emission at 414nm with a full width at half maximum (FWHM) of 29nm, together with a thousand-fold increase in RISC rate. OLEDs based on the champion material achieve a record maximum external quantum efficiency (EQE) of 22.8% with CIE coordinates of (0.163, 0.046), approaching the coordinates of the BT.2020 blue standard. Moreover, TADF-assisted fluorescence devices employing the designed material as a sensitizer exhibit an exceptional EQE of 33.1%. This work thus provides a blueprint for future development of efficient deep-blue TADF emitters, representing an important milestone towards meeting the blue color gamut standard of BT.2020.

Investigating Hydrogen Bonding in Quinoxaline-Based Thermally Activated Delayed Fluorescent Materials.

In recent years, hydrogen bonding (H bonding) as an intramolecular locking strategy has been proposed to enhance photoluminescence, color purity, and photostability in thermally activated delayed fluorescence (TADF) materials. Rigidification as a design strategy is particularly relevant when using electron-deficient N-heterocycles as electron acceptors, because these materials often suffer from poor performance as orange to near-infrared emitters as a result of the energy gap law. To critically evaluate the presence of H bonding in such materials, two TADF-active donor-acceptor dyads, ACR-DQ and ACR-PQ, were synthesized. Despite their potential sites for intramolecular H bonding and emissions spanning yellow to deep red, computational analyses (including frequency, natural bond orbital, non-covalent interaction, and potential energy surface assessments) and crystal structure examinations collectively suggest the absence of H bonding in these materials. Our results indicate that invoking intramolecular H bonding should be done with caution in the design of rigidified TADF materials.

Multifunctional Deep-Blue Thermally Activated Delayed Fluorescence Based on an Oxygen-Bridged Boron Acceptor for Highly Efficient Organic Light-Emitting Diodes.

Until now, thermally activated delayed fluorescence (TADF) materials based on bridged boron-based acceptors have been primarily developed as dopants. However, in this study, we synthesized and characterized multifunctional deep-blue TADF materials─t-OBO-DMAC and t-OBO-DPAC─using bridged boron-based acceptors in combination with dimethylacridine or diphenylacridine as donors. These materials serve as both dopants and hosts. Theoretical calculations and experimentally measured photophysical properties of t-OBO-DMAC reveal a smaller singlet-triplet energy difference, higher photoluminescence quantum yield, and more efficient reverse intersystem crossing compared to t-OBO-DPAC. When evaluated as TADF emitters, t-OBO-DMAC and t-OBO-DPAC exhibited maximum external quantum efficiency (EQE) of 14.4 and 7.3% with deep-blue color coordinates of (0.14, 0.11) and (0.15, 0.07), respectively. Both materials were further assessed as hosts in various configurations, including host-only, TADF, phosphorescent, and phosphor-sensitized fluorescence (PSF)-emitting systems. Notably, t-OBO-DMAC demonstrated a high maximum EQE of 13.9% with deep-blue color coordinates of (0.15, 0.07) in a nondoped host-only device. Remarkably, both materials achieved EQEs exceeding 20% in the PSF devices. Our study marks a critical advancement in the field that breaks the conventional boundaries of the dopant and host and demonstrates unprecedented multifunctionalities for advanced organic light-emitting diodes.

Two-Coordinate Thermally Activated Delayed Fluorescence Coinage Metal Complexes: Molecular Design, Photophysical Characters, and Device Application.

Since the emergence of the first green light emission from a fluorescent thin-film organic light emitting diode (OLED) in the mid-1980s, a global consumer market for OLED displays has flourished over the past few decades. This growth can primarily be attributed to the development of noble metal phosphorescent emitters that facilitated remarkable gains in electrical conversion efficiency, a broadened color gamut, and vibrant image quality for OLED displays. Despite these achievements, the limited abundance of noble metals in the Earth's crust has spurred ongoing efforts to discover cost-effective electroluminescent materials. One particularly promising avenue is the exploration of thermally activated delayed fluorescence (TADF), a mechanism with the potential to fully harness excitons in OLEDs. Recently, investigations have unveiled TADF in a series of two-coordinate coinage metal (Cu, Ag, and Au) complexes. These organometallic TADF materials exhibit distinctive behavior in comparison to their organic counterparts. They offer benefits such as tunable emissive colors, short TADF emission lifetimes, high luminescent quantum yields, and reasonable stability. Impressively, both vacuum-deposited and solution-processed OLEDs incorporating these materials have achieved outstanding performance. This review encompasses various facets on two-coordinate TADF coinage metal complexes, including molecular design, photophysical characterizations, elucidation of structure-property relationships, and OLED applications.

A figure of merit for efficiency roll-off in TADF-based organic LEDs

Organic light-emitting diodes (OLEDs) are a revolutionary light-emitting display technology that has been successfully commercialized in mobile phones and televisions1,2. The injected charges form both singlet and triplet excitons, and for high efficiency it is important to enable triplets as well as singlets to emit light. At present, materials that harvest triplets by thermally activated delayed fluorescence (TADF) are a very active field of research as an alternative to phosphorescent emitters that usually use heavy metal atoms3,4. Although excellent progress has been made, in most TADF OLEDs there is a severe decrease of efficiency as the drive current is increased, known as efficiency roll-off. So far, much of the literature suggests that efficiency roll-off should be reduced by minimizing the energy difference between singlet and triplet excited states (ΔEST) to maximize the rate of conversion of triplets to singlets by means of reverse intersystem crossing (kRISC)5–20. We analyse the efficiency roll-off in a wide range of TADF OLEDs and find that neither of these parameters fully accounts for the reported efficiency roll-off. By considering the dynamic equilibrium between singlets and triplets in TADF materials, we propose a figure of merit for materials design to reduce efficiency roll-off and discuss its correlation with reported data of TADF OLEDs. Our new figure of merit will guide the design and development of TADF materials that can reduce efficiency roll-off. It will help improve the efficiency of TADF OLEDs at realistic display operating conditions and expand the use of TADF materials to applications that require high brightness, such as lighting, augmented reality and lasing.

Ultrafast spin-flip exciton conversion and narrowband sky-blue luminescence in a fused polycyclic selenaborin emitter.

Thermally activated delayed fluorescence (TADF) materials with high photoluminescence quantum yields and fast reverse intersystem crossing (RISC) capabilities are highly desirable for applications in high-efficiency organic light-emitting diodes. Herein, we report the synthesis as well as structural and photophysical properties of 5,9-diselena-13b-boranaphtho[3,2,1-de]anthracene (SeBSe) as a narrowband-emissive TADF material. The incorporation of two selenium atoms into the boron-fused pentacyclic π-core results in a small singlet-triplet energy gap (ΔE ST) and thereby significant TADF properties. Moreover, theoretical calculations revealed a noticeable spin-orbit coupling enhancement between the singlet and triplet manifolds in SeBSe by virtue of the heavy-atom effect of selenium atoms. Consequently, SeBSe allows ultrafast spin-flip RISC with the rate constant surpassing 108 s-1, which far exceeds the corresponding fluorescence radiative decay rate (∼106 s-1), enabling an ideal singlet-triplet superimposed excited state.