Thermal Volume Research Articles

Clinical application and challenges of thermal vapor lung volume reduction

There are major clinical challenges in the management of chronic obstructive pulmonary disease (COPD). Recent studies suggest that thermal vapor lung volume reduction may be an important interventional method in the treatment of emphysema phenotype of COPD. In this article, we reviewed and summarized the research and development, the current situation of clinical application, and the clinical challenges of thermal vapor lung volume reduction, to provide further clinical evidence for the standardized application of thermal vapor lung volume reduction.

A Computational Study on Effects of PID Temperature Target and RF Frequency for PID-Controlled Nonablative RF Cosmetic Systems.

Commonly adopted in cosmetic dermatology, nonablative radiofrequency (RF) devices convert high-frequency electromagnetic energy into thermal energy to induce a wound-healing response in skin tissue. However, differences in the electrical properties of different skin layers raise questions about the impact of different RF frequencies and target temperatures on treatment effectiveness. This paper presents a finite element analysis (FEA)-based computational study aimed at simulating and optimizing the effects of a proportional integral derivative (PID)-controlled RF cosmetic devices under different combinations of these two parameters during treatment. A 3D physical model for the application of a nonablative RF device was constructed using COMSOL, which included the human tissue and RF electrodes, electromagnetic and thermal boundary conditions, as well as the PID controller. FEA was performed for each of the twelve models with parameter combinations of three RF frequencies (0.1, 0.5, and 1 MHz) and three PID-controlled target temperatures (60°C, 65°C, and 70°C) plus one group without PID control. Treatment effectiveness was quantitatively assessed using the integration of tissue thermal damage fraction, i.e., thermal damage volume. In the earlier stage of heating (0-10 s), higher RF frequency resulted in a larger thermal damage volume. At 10 s, among models with a temperature target of 70°C, there is a 6.04% difference between the thermal damage volume at RF frequencies of 1.0 and 0.1 MHz. In the later stage of heating(11-80 s), the impact of RF frequency decreases. The difference in thermal damage volume caused by higher temperature targets is more significant, at 80 s, among models with an RF frequency of 1.0 MHz, the 70°C model produces 1.15 and 1.36 times more tissue thermal damage than the 65°C and 60°C models. PID controller has ensured treatment safety and uniformity, in exchange for some efficiency. Among 12 parameter combinations, the one with a temperature of 70°C and RF frequency of 1.0 MHz achieved the highest thermal damage volume, which could potentially result in the best esthetic effect. Considering users' different susceptibility to heat, engineers or physicians can select better temperature targets and RF frequencies to bring the desired cosmetic results based on thermal damage volume curves from this study.

Life Cycles and Polycyclicity of Mega Retrogressive Thaw Slumps in Arctic Permafrost Revealed by 2D/3D Geophysics and Long‐Term Retreat Monitoring

AbstractMega retrogressive thaw slumps (MRTS, >106 m3) are a major threat to Arctic infrastructure, alter regional biogeochemistry, and impact Arctic carbon budgets. However, processes initiating and reactivating MRTS are insufficiently understood. We hypothesize that MRTS preferentially develop a polycyclic behavior because the material is thermally and mechanically prepared for subsequent generation failure. In contrast to remote sensing, geophysical reconnaissance reveals the inner structure and relative thermal state of MRTS decameters beneath slump surfaces, potentially controlling polycyclicity. Based on their life cycle development, five (M)RTS were studied on Herschel Island, an MRTS hotspot on the Canadian Beaufort coast. We combine >2 km of electrical resistivity tomography (ERT), 500 m of ground‐penetrating radar (GPR) and annual monitoring of headwall retreat from 2004 to 2013 to reveal the thermal state, internal structure, and volume loss of slumps. ERT data were calibrated with unfrozen‐frozen transitions from frost probing of active layer thickness and shallow boreholes. In initial stage MRTS, ERT displays surficial thermal perturbations a few meters deep, coincident with recent mud pool and mud flow development. In early stage polycyclic MRTS, ERT shows decameter deep‐reaching thermal perturbations persisting even 300 years after the last activation. In peak‐stage polycyclic MRTS, 3D‐ERT highlights actively extending deep‐reaching thermal perturbations caused by gully incisions, mud slides and mud flows. GPR and headwall monitoring reveal structural disturbance by historical mud flows, ice‐rich permafrost, and a decadal quantification of headwall retreat and slump floor erosion. We show that geophysical signatures identify long‐lasting thermal and mechanical disturbances in MRTS predefining their susceptibility to polycyclic reactivation.

Structural effect on physicochemical properties of ethanolamine carboxylate ionic liquids by experimental and theoretical study

The hydroxylammonium ionic liquids (ILs) falling within the category of protic ionic liquids (PILs) have garnered attention from researchers, owing to their outstanding solubility properties. A one-step method was employed to synthesize a series of ethanolamine ILs. The thermodynamic properties of the ILs, including surface tension, density, and electrical conductivity, were measured across varying temperatures. Essential parameters such as thermal expansion coefficient, molecular volume, surface entropy, and surface energy were estimated using empirical equations. In order to elucidate the intermolecular interactions within the ethanolamine carboxylate ILs, the sigma profiles of ILs were determined using COSMO-RS. It was observed that the ethanolamine cation has a strong potential as a H-bond donor, while the carboxylate anion demonstrates significant capability as a hydrogen bond acceptor. By DFT calculations, it was observed that the NH in the ethanolamine cation can form H-bonds with the oxygen atom in the carboxylate anion.

Enhancing electrical insulation and thermal conductivity in polydimethylsiloxane polymer nanocomposites through silica coating on carbon fibers

Mesophase pitch-based carbon fibers (MPCFs) exhibit high thermal conductivity (∼900Wm−1K−1) and are considered to be an important candidate for future thermal management. However, MPCFs lead to an increase in the electrical conductivity of nanocomposites due to the low volume electrical resistivity (∼10−3 Ω cm). The development of MPCFs nanocomposites with high thermal conductivity and good electrical insulation remains a challenging problem. In order to solve the problem, we utilized the surfactant cetyltrimethylammonium bromide (CTAB) as an anchor for hydrolysis, and employed a sol-gel method to deposit a silica coating on MPCFs (silica@MPCFs). Silica@MPCFs was used as the filler for polydimethylsiloxane (PDMS) matrix. The nanocomposites exhibit commendable thermal conductivity (achieving 1.52 Wm−1K−1) and excellent volume electrical insulation (exceeding 1013 Ω cm) at a 30 vol% concentration. Notably, both the thermal conductivity and volume electrical insulation exceed MPCFs/PDMS. This approach to electrical insulation treatment holds substantial potential for the future preparation of high-performance nanocomposites of electronic devices.

Predicting liver ablation volumes with real-time MRI thermometry

Background & AimsMRI guidance offers better lesion targeting for microwave ablation of liver lesions with higher soft-tissue contrast, as well as the possibility of real-time thermometry. This study aims to evaluate the correlation of real-time MR thermometry-predicted lesion volume with the ablation zone in postprocedural first-day images. Materials and MethodsThis single center retrospective analysis evaluated prospectively collected patients who underwent MRI-guided microwave ablation with real-time thermometry between December 2020 and July 2023. All procedures were performed in general anesthesia on a 1.5T MRI scanner. Real-time thermometry data were acquired using multi-slice gradient-echo EPI sequences, and thermal dose (CEM43 of 240 minutes as a threshold) maps were created. The volume of tissue exposed to lethal thermal dose in MR thermometry (thermal dose) was compared with the ablation zone volume in portal phase T1w MRI on postprocedural first-day using Pearson correlation test, and visual quantitative assessment by radiologists was performed to evaluate the similarity of shapes and volumes. ResultsOut of 30 patients with 33 lesions with thermometry images, six (18.1%) lesions were excluded due to artifacts limiting interpretation of thermal dose volume. Twenty-four patients with 27 lesions (20 male, age 63.1±9.1) were evaluated for the volume correlation. The volume of thermal dose-predicted lesions and the postprocedural first-day ablation zones showed a strong correlation (R=0.89, p<0.001). Similarly, visual similarity of MR thermometry-predicted shape and the ablation zone shape was graded as perfect in 23 (85.1%) lesions. ConclusionsReal-time thermal dose-predicted volumes show very good correlation with the ablation zone volumes in images obtained one day after the procedure, which could reduce the local recurrence rates with the possibility of reablating lesions within the same procedure.

A failure model for bulk metallic glass based on strain rate-correlated softening mechanism

Due to the amorphous nature of the bulk metallic glasses (BMGs), catastrophic fractures occur once the nucleation and propagation of shear bands occur, which is quite different from crystal materials. So far, the underlying mechanism of BMG failure behavior and its strain rate effect are still controversial. In this work, the quasi-static and dynamic compression experiments of Vit-1 BMG were carried out in a wide range of strain rates from 0.001 s−1 to 5000 s−1. The results show that the variation tendency of failure stress with strain rate can be divided into three stages. The quasi-static failure stress is insensitive to the change of strain rate with only almost constant free volume softening effect inside the material during the failure process. When entering dynamic loading stage, the failure stress decreases significantly, which is caused by a combination of increasing thermal softening and free volume softening effects. When the strain rate increases to the third stage, that is, over 2000 s−1, the failure stress and the softening effects basically remain unchanged. The transformation of failure mechanism is well confirmed by the micromorphology of fracture surfaces. Based on the experimental results, a concise empirical failure model is established, in which the failure stress is decomposed into softening and non-softening parts. The verification experiments show that the model can effectively predict the compression failure stress of BMG under different strain rates.

Insight into properties of sizable glass former from volumetric measurements.

Sizable glass formers feature numerous unique properties and potential applications, but many questions regarding their glass transition dynamics have not been resolved yet. Here, we have analyzed structural relaxation times measured as a function of temperature and pressure in combination with the equation of state obtained from pressure-volume-temperature measurements. Despite evidence from previous dielectric studies indicating a remarkable sensitivity of supercooled dynamics to compression, and contrary to intuition, our results demonstrated the proof for the almost equivalent importance of thermal energy and free volume fluctuations in controlling reorientation dynamics of sizable molecules. The found scaling exponent γ = 3.0 and Ev/Ep ratio of 0.6 were typical for glass-forming materials with relaxation dynamics determined by both effects with a minor advantage of thermal fluctuations involvement. It shows that the high values of key parameters characterizing the sensitivity of the glass transition dynamics to pressure changes, i.e., activation volume ΔV and dTg/dP, are not a valid premise for a remarkable contribution of volume to glass transition dynamics.

Enhancing the cryogenic performance of superconducting magnet encapsulation resins with hyperbranched polymers: A molecular dynamics simulation and experimental study

Epoxy resin (EP) plays a crucial role in safeguarding superconducting magnets. One of the major concerns related to its usage is its inherent susceptibility to cracking under cryogenic temperatures and the strong electromagnetic forces experienced during the operation of superconducting magnets. In this study, we utilize molecular dynamics (MD)simulation and cryogenic experiments to conduct a comprehensive investigation aimed at gaining a profound understanding of the cryogenic toughening mechanism in hyperbranched polymers-toughened (HBPs) EPs. Five different crosslinking models of EP composites were established by MD simulations. The performance parameters obtained from the MD simulation calculations are highly consistent with the experimental results, which included the glass transition temperature, coefficient of thermal expansion, mechanical properties, free volume and atomic mean square displacement. Moreover, the relationship between structural changes and properties of the MD models was investigated. This research method provides a new avenue of exploration for superconducting magnet encapsulation resin materials.

Temperature-dependent acoustic emission characteristics and statistical constitutive model of granite under uniaxial compression

Understanding the temperature-dependent mechanical behavior and fracture characteristics of granite is crucial for many engineering projects. In this study, the real-time temperature curves of granite specimens were obtained during the heating and cooling process, and the thermal treatment tests were conducted. The physical properties of the specimen before and after thermal treatment, including mass, volume, and P-wave velocity, were measured. The acoustic emission (AE) signal in the uniaxial compression is monitored. The results indicate that the physical properties of granite deteriorate with temperature, while the mechanical properties show two effects of thermal strengthening and thermal weakening. This phenomenon is comprehensively analyzed by literature statistical data and optical microscopic observation. Furthermore, the AE characteristic is strongly dependent on temperature. High temperature induces more AE ring count to appear in the early stage of loading. As the temperature increases, the crack initiation stress decreases and the table crack propagation stage becomes longer. The attenuation of high-frequency signals and the enhancement of low-frequency signals are related to the development and interaction mechanism of thermally-induced crack and stress-induced crack. At 600 °C, the global b-value increases significantly. Meanwhile, the evolution of dynamic b-value helps explain the failure process of granite under axial load after thermal treatment. In addition, a new thermo-mechanical damage statistical constitutive model of granite considering temperature effects is proposed by introducing AE parameters. The main advantages of this model can well fit the nonlinear behavior of granite in the early loading stage after thermal treatment, and reflect the failure process of granite before the peak value.

Solvation Forces Near Hydrophobic Surfaces: A Classical Density Functional Theory Study.

We use classical density functional theory (DFT) to model solvation interactions between hydrophobic surfaces, which we show to be characterized by depletion attraction at small surface to surface separations and a slowly decaying bipower law interaction at large separations. The solvation interaction originates from van der Waals (vdW) and Coulombic interactions between molecules in the polar solvent, e.g., water, and from the molecules thermal motion and finite volume. We investigate model hydrophobic surfaces represented by bubbles and nonpolar solids, e.g., aliphatic particles, and calculate in a DFT fashion the distribution of molecules in the interlaying solvent between two such surfaces and the hydrophobic excess force resulting from it. The interactions are largely attractive, which is well-known in measurement, albeit vdW attraction between molecules in solids and in the solvent may cause repulsion at certain interface to interface separations. We commence our analysis by suggesting an asymptotic analytical bipower law expression for the solvation interaction at large separations. Thereafter we present a full numerical solution, which is in good agreement with the analytical prediction and further explores the interaction at small surface to surface separations. Our theoretical results yield adhesion energies which agree with previous experiments.

Influence of the thermal shrinkage-induced volume contraction on the yielding behavior of waxy oil

The present article investigates the effect of thermal shrinkage on the yielding behavior of waxy oil gel. The paper compares constant gap and constant normal force measurement protocols to examine the effect of measurement protocol on the rheological behavior of thermoreversible gel. The findings of this study reveal that the extent of stress overshoot and yield stress in a constant shear-rate start-up flow shows a lower magnitude in a constant gap protocol compared to a constant normal force protocol. The decrease in gel strength in the former protocol is mainly attributed to the formation of voids. These voids cause localized fractures within the crystal network. In contrast, in the constant normal force measurement protocol, gel contraction is compensated by utilizing a variable gap setting. Variable gaps compensate for the lower specific volume of the gel after crystallization, minimizing void formation and subsequent rupture of the crystal network. Hence, the gel network formed using the constant normal force protocol is more homogeneous, eliminating the uncertainties in yield stress measurement. Finally, the effect of thermal history, wax content, and aging period on the yield stress values highlights notable findings. Contrary to the conventionally accepted results, the aging period is found to impact the yield stress negatively, and a nonmonotonic relationship between the cooling rate and yield stress is noticed under the constant gap protocol. Thus, the results obtained under the constant normal force protocol are more reliable and can help in developing a fundamental understanding of the yielding behavior.

Research on the matching relationship of multi-energy collaborative temperature control in factory farming system based on TRNSYS

In light of the escalating energy crisis and the imperative to address climate change, there exists a pervasive global consensus advocating the reduction of carbon emissions and the exploration of novel energy sources. Despite this consensus, the realm of factory farming continues to rely upon conventional energy sources for heating purposes. This study focuses on the investigation into the multi-energy heating system employed by an aquaculture company in Dalian City. We undertook the optimization of critical parameters within this system and formulate a comprehensive model for the multi-energy system using the TRNSYS transient simulation platform. The optimization process employs the Hooke-Jeeves algorithm, implemented through GenOpt software, with the system annual value cost serving as the objective function. Optimization variables include solar collector area, solar collector slope, thermal storage tank volume, seawater source heat pump power, and wastewater plate heat exchanger area. The findings of this investigation reveal a marked enhancement in the Coefficient of Performance (COP) and overall system performance after optimization. The resultant annual operating cost was $3133.61, indicating a substantial reduction of $1151.86 compared to the pre-optimization period’s cost. The static payback period is determined to be 9.43 years. During the heating period, in contrast to traditional boiler heating, the optimized system manifests a reduction in coal consumption of 4485.03 kg, accompanied by a cumulative decrease in pollutant emissions totaling 11544.46 kg. This substantiates the system’s cumulative economic and environmental viability.

Computational Evaluation of Pulsating Heat Pipe for Fluid Flow Behavior and its Thermal Performance

Computational fluid analysis of a single circuit heat pipe was undertaken to ascertain the thermal efficiency of water at various fill ratios, specifically 40%, 50%, and 60% under varying heating conditions. The analysis employed the ANSYS Fluent computational fluid dynamics software, utilizing a k-epsilon to the heat pipe as the solver. The analysis was carried out on a copper tube with an internal diameter measuring 3/16 inches. During the analysis, the thermal inflow at the adiabatic region was adjusted to zero, while the condenser region’s temperature remained constant at 25°C. Meanwhile, the heat input at the evaporator region was systematically adjusted to 105°C, 110°C, 115°C, and 120°C. Key Performance characteristics of heat pipe i.e. thermal resistance, and water volume fraction were evaluated during analysis. The temperature variations noted in both regions affirmed that the pulsating pipe’s performance was influenced by the phase transition between liquid and vapor. Furthermore, the concentration of volume within the evaporator section was monitored, confirming the presence of a dual-phase phenomenon within the heat pipe. Through the analysis, it was noted that the thermal resistance of the water is minimized at a 50% fill ratio for each level of heat input. Notably, the promising results were obtained at an input temperature of 120°C with a value of 1.025°C /W which was 7.3% and 9.8% lower than thermal resistance at 40% and 60% fill ratios, respectively. The reduced thermal resistance in this scenario is attributed to the flow dynamics within the capillary, propelled by rapid phase change mechanisms. This shows the importance of Pulsating Heat Pipes (PHPs) in thermal control, as well as the intricacies of their operating mechanisms. Experimental and theoretical investigations have investigated numerous elements influencing PHP performance, with numerical modeling providing insight into thermal resistance and water volume fraction dynamics under varying heating temperatures and fill ratios.

CFD analysis of paraffin-based hybrid (Co–Au) and trihybrid (Co–Au–ZrO2) nanofluid flow through a porous medium

Abstract Ternary hybrid nanofluids possess improved thermal characteristics, enhanced stability, better physical strength, and multi-functionality as compared to hybrid or usual nanofluids. The aim of the ongoing study is to explore the novel thermal attributes of hybrid and trihybrid nanofluids through a porous medium. Whereas the nano-composition of cobalt (Co), gold (Au), and zirconium oxide (ZrO2) make amalgamation in the paraffin (Pfin) which is a base fluid. This nano-composition of the proposed nanoparticles, specifically, subject to the base fluid Pfin has not been interpreted before. The analysis not only covers the features of trihybrid nanofluids (Co–Au–ZrO2–Pfin) but it also describes the characteristics of hybrid (Co–Au–Pfin) as well as pure nanofluids (Co–Pfin). An efficient numerical algorithm is developed for which the numerical simulations are carried out. The approximations are performed in MATLAB software using “Successive under Relaxation (SUR)” technique. A comparison, under certain limiting conditions, with the established results appraises the efficiency of the numerical code. The outcomes evidently designate that temperature raises with the change in thermal radiation and volume fraction of gold and zirconium oxide in either case of pure, hybrid, or ternary nanofluids. The concentration ϕ 3 {\phi }_{3} of ZrO2 has a significant impact on Nusselt number rather than the concentration ϕ 1 {\phi }_{1} of cobalt and ϕ 2 {\phi }_{2} of gold. It has been comparatively noticed that the ternary nanofluids (Co–Au–ZrO2–Pfin) portray embellished and improvised thermal characteristics as compared to the other two cases.

An improved model for discrete element method simulation of spatial gradient distributions of freeze-thaw-induced damage to sandstone

The investigation into the freeze-thaw (F-T) damage holds paramount theoretical significance in comprehending the mechanisms underlying F-T disasters, predicting catastrophes, and devising engineering protection systems. F-T damage in rock evolves progressively from the surface towards the interior, however, current models exhibit conspicuous deficiencies in simulating such progressive damage. Drawing upon experimental findings concerning the evolution of F-T damage in water-saturated rock, an improved discrete element model (DEM) for rock F-T damage is developed. In this model, thermal conduction model and volume expansion theory are integrated to describe the volumetric expansion characteristics during the freezing of internal pore water, thus effectively simulating the initiation and progression characteristics of frost heave cracks. We validated this model through comparisons with theoretical analyses and experiments, exploring the effects of model parameters. Employing moment tensor, the spatial gradient distribution patterns of F-T damage in water-saturated rock from the vantage point of fracture energy was analyzed. The results reveal that at −20 °C, 20 F-T cycles are requisite for the propagation of damage from the outer layer to the center of the Sichuan sandstone samples. The extent of damage in the outer layer exceeds that of the center, with the maximum fracture energy density of the outer layer being approximately 38.7 times that of the center. This model aptly delineates the progressive development of F-T damage characteristics and holds promise for further applications in identifying and delineating F-T damage zones in cold region rock engineering.

Dynamic response of He bubbles in Fe9Cr1.5W0.4Si F/M steel under in-situ stepwise nanocompression

Inert-gas bubbles in metals have attracted great attention due to their fundamental role in swelling and degradation of materials. Studies of bubble behavior can provide valuable insights for developing advanced materials. Although extensive research has been conducted on bubble behavior under irradiation or thermal conditions, there is still a lack of investigation under both stress and temperature conditions. In this work, in-situ uniaxial compression tests were performed on helium-bubbled Fe9Cr1.5W0.4Si F/M steel using transmission electron microscopy at 923 K to investigate the responses of bubbles with increasing strain. The results revealed a series of bubble responses, including frequent annihilation, occasional coalescence, and a "forced" coalescence achieved by connecting multiple bubbles under high strain. These responses relied on bubble migration and interaction, influenced by the factors such as the He-V ratio, relative bubble position, and sink effect. Furthermore, the migration mechanism of compressed bubbles at high temperatures is considered to be a combination of surface diffusion induced by thermal gradient and volume diffusion induced by stress gradient. These two mechanisms are expected to compete with each other in different temperature and stress. These findings offer crucial experimental insights into the behavior of bubbles in solids exposed to stress and thermal conditions.

Evolution of microstructure and properties of IN738 alloy under thermal exposure with different post-processing states

The microstructure and properties of nickel-based superalloys under thermal exposure are the key basis for evaluating the high-temperature stability and proposing process optimization strategies. This study investigated the microstructural evolution and the corresponding tensile properties of IN738 alloy with different post-processing states under thermal exposure at 700 °C. The results show that the microstructures of IN738 alloys with different post-processing states (i.e., hot isostatic pressing (HIP) and standard heat treatment (SHT)) are significantly different. For the HIPed sample, large cuboidal γ′ and a small number of ultra-fine spheroidal γ′ precipitates are present in the γ matrix. Under thermal exposure, the size and volume fraction of ultra-fine spheroidal γ′ increase with prolonged thermal exposure time. In comparison, the SHTed sample is characterized as a bimodal distribution of γ′, with large primary cuboidal γ′ and small secondary spherical γ′. The size and volume fraction of primary γ′ increase first and then remain steady under thermal exposure. In particular, the tensile properties under exposure depend highly on the post-processing states. The increase of tensile strength after the thermal exposure in the HIPed sample is attributed to the rising fine spherical γ′ volume fraction. The rising size and volume fraction of primary γ′ in the SHTed sample improve the tensile strength during thermal exposure.

Hybrid Analytical-Numerical Modeling of Surface Geometry Evolution and Deposition Integrity in a Multi-Track Laser-Directed Energy Deposition Process

Abstract Modeling multitrack laser-directed energy deposition (LDED) is different from single-track deposition. There is a temporal variation in the deposition geometry and integrity in a multitrack deposition, which is not well understood. This article employs an analytical model for power attenuation and powder catchment in the melt pool in conjunction with a robust fully coupled metallurgical-thermomechanical finite element (FE) model iteratively to simulate the multitrack deposition. The novel hybrid analytical–numerical approach incorporates the effect of preexisting tracks on melt pool formation, powder catchment, geometry evolution, dilution, residual stress, and defect generation. CPM 9V steel powder was deposited on the H13 tool steel substrate for validating the model. The deposition height is found to be a function of the track sequence but reaches a steady-state height after a finite number of tracks. The height variation determines the waviness of the deposited surface and, therefore, the effective layer height. The inter-track spacing (I) plays a vital role in steady-state height evolution. A larger value of I facilitates faster convergence to the steady-state height but increases the surface waviness. The FE model incorporates the effects of differential thermal contraction, volume dilation, and transformation-induced plasticity. It predicts the deposition geometry and integrity as a function of inter-track spacing and powder feed rate. The insufficient remelting of the substrate or the preceding track can induce defects. A method to predict and mitigate these defects has also been presented in this article.

Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stability

Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stability